Related
Hello, I'm having an issue with my Galaxy GIO with the market.
I Installed the market on the phone and try to launch it.
I get greeted with this message saying "You must add an account to the device to continue. Do you want to add one now?"
I tap yes and the app closes it self.
I'm using Android 2.3.7 with CyanogenMod-7.1.0-gio-RC-3.0.
Same with Gio - Cm 7.2 RC-1 P-4
Sent from my GT-S5660
download gapps zip file for cm7. flash it from cwm recovery. upon restart it will ask you to add your Google account. enter your details and then market will work
Sent from my GT-S5660 using XDA App
samydroid said:
download gapps zip file for cm7. flash it from cwm recovery. upon restart it will ask you to add your Google account. enter your details and then market will work
Sent from my GT-S5660 using XDA App
Click to expand...
Click to collapse
I tried that but the app didn't show up in my phone
Jogzi said:
I tried that but the app didn't show up in my phone
Click to expand...
Click to collapse
gapps won't show up as an app. go to settings - a/cs &, sync - add a/c and check if Google option is there or not.
Sent from my GT-S5660 using XDA App
samydroid said:
gapps won't show up as an app. go to settings - a/cs &, sync - add a/c and check if Google option is there or not.
Sent from my GT-S5660 using XDA App
Click to expand...
Click to collapse
Nope, dosen't have that option.
Jogzi said:
Nope, dosen't have that option.
Click to expand...
Click to collapse
Did you enable dt-app2sd before flashing gapps?
samydroid said:
Did you enable dt-app2sd before flashing gapps?
Click to expand...
Click to collapse
No i don't think so. Where is that located ?
Jogzi said:
No i don't think so. Where is that located ?
Click to expand...
Click to collapse
Well that's good that you didn't do that. I have flashed CM7.1 quite a few times and as soon as I finish flashing it, I flash gapps and it works flawlessly.
I'm unable to figure out your issue. So, all I can suggest you is to backup any important data, wipe data + wipe cache and then flash gapps again (you may try re-downloading it from http://wiki.cyanogenmod.com/index.php?title=Latest_Version/Google_Apps).
Or wait for someone else to help you.
Alright then. I'll wait for another person to reply with another fix.
Jogzi said:
Alright then. I'll wait for another person to reply with another fix.
Click to expand...
Click to collapse
I had this too, even with gapps installed.. I fixed it by going back to stock, flash cm 7.2 and download gapps again,, make sure you use px-cwm-v2.zip as cwm recovery, mount system, clear data, cache, and make sure gapps.zip is on your root of your sd card..
Then flash them again
Sent from my GT-S5660 using xda premium
Did you mount system and data in recovery before flashing gapps?
Sent from my Galaxy Tab 7'' GT-P1000 running CM9 (ICS)
Please help me about my gio i updated it yesterday but bluetooth and wifi status is error. 2.3.4
What kind of error? Can you be a bit more specific??
Sent from my GT-S5660 using xda premium
I update my gio to gingerbread 2.3.4 using odin, after that i try using wifi and bluetooth it always says error. i check my status of my phone WIFI MAC address unavailable bluetooth address also unavailable
johnarela said:
I update my gio to gingerbread 2.3.4 using odin, after that i try using wifi and bluetooth it always says error. i check my status of my phone WIFI MAC address unavailable bluetooth address also unavailable
Click to expand...
Click to collapse
Do you have Clockworkmod installed? Then make a backup and wipe data and caches, see if ir fixes.
Sent from my GT-S5660 using xda premium
I already do it but nothing happen it always says driver unsuccessful when i press *#*#526#*#*
voetbalremco said:
Do you have Clockworkmod installed? Then make a backup and wipe data and caches, see if ir fixes.
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
ROFL, he doesn't need to install CWM Recovery just to wipe all. He has stock recovery where he can do wipe data and cache or just put a code in the dialer.
Just shut off the phone and turn it on by pressing Home button + Power and you will get into stock recovery, then wipe data and cache.
i tried many ways like pressing the code in the dial pad, rebooting, wiping cache/data, reflashing but nothing happens
johnarela said:
i tried many ways like pressing the code in the dial pad, rebooting, wiping cache/data, reflashing but nothing happens
Click to expand...
Click to collapse
Try flashing another firmware
Sent from my GT-S5660 using xda premium
a new firmware would fix it why would u like 2.3.4 when the latest is 2.3.6, try to flash DXKT4 and then make a factory reset hope this helps
I would suggest, you give a shot to the new CyanogenMod 7.2
Follow this link: http://forum.xda-developers.com/showthread.php?t=1381355
I tell you, it is much more reliable than you might think. Moreover, because of the custom kernel, you can select some pre-installed CPU governor, so that your GIO become even a bit faster.
Good Luck
Hi,
First, i would like to know, you are upgrading from what firmware to what firmware? is it one package firmware or full package?
I would suggest you to flash it again, but this time, using the full package firmware. After that, don't forget to wipe data/cache, and then factory reset, all via recovery mode.
My exp about upgrading:
- from S5660DXKC3 (froyo, one package) to S5660DXKP6 (gingerbread, one package)
- unstable, lagging, wasteful of battery (bottom line is, disappointed)
Note that xkp6 2.3.6 on xda thread has been modified, on sammobile its a clean rom
Sent from my GT-S5660 using xda premium
most stable wifi rom for me is this one :
SamsungGalaxyGIO_S5660_XXKQG_2.3.4 (search for it on sammfirmware...)
i am now trying to know how to port its baseband to a flashable baseband to put in wichever rom i want, but i have no idea where to start...
0M3G4_ said:
most stable wifi rom for me is this one :
SamsungGalaxyGIO_S5660_XXKQG_2.3.4 (search for it on sammfirmware...)
i am now trying to know how to port its baseband to a flashable baseband to put in wichever rom i want, but i have no idea where to start...
Click to expand...
Click to collapse
So, does anyone know how to extract the baseband from this rom in order to use it with any other rom i'd like...??
0M3G4_ said:
So, does anyone know how to extract the baseband from this rom in order to use it with any other rom i'd like...??
Click to expand...
Click to collapse
Remove the .md5 , extract the .tar
And flash the amss file .
Sent from my GT-S5660 using xda premium
WIFI+BT+Acceloremeter
Dear Friends,
I bought an "olleh" galaxy gio and updated it to 2.3.6 from Odin.
Now the"Olleh" logo do not show and in its place samsung generic logo show on startup.
Main problem is, since update, my "auto-rotate" option rotates screen in opposite directions and when switching on wifi or BT, it just shows "Error".
No detail of error is shown.
Except that everything is fine. Calling, texting and gaming...
I used the following ROM to update:
S5660XXKTF_S5660DBTKT1_S5660XXKT4_HOME.tar.md5
Please help me with WIFI as I need it very much and could save me alot.
sohaib.ahln said:
Dear Friends,
I bought an "olleh" galaxy gio and updated it to 2.3.6 from Odin.
Now the"Olleh" logo do not show and in its place samsung generic logo show on startup.
Main problem is, since update, my "auto-rotate" option rotates screen in opposite directions and when switching on wifi or BT, it just shows "Error".
No detail of error is shown.
Except that everything is fine. Calling, texting and gaming...
I used the following ROM to update:
S5660XXKTF_S5660DBTKT1_S5660XXKT4_HOME.tar.md5
Please help me with WIFI as I need it very much and could save me alot.
Click to expand...
Click to collapse
Let me guess. You have an SHW-500 or something?!
Sent from my GT-S5660 using xda app-developers app
When flashing with ODIN:
Make sure you flash the right firmware! If you flashed any firmware, it also flashes their model's and Country's: modem, csc, kernel, system, etc...
Thus resulting wifi, data, bluetooth, and connectivity errors.
Find the right Stock ROM for your Gio model here. Then use ODIN to flash it.
Best build yet. Wondering if anyone else is experiencing GPS issues?
I was having issues with GPS and streaming music thru Bluetooth.
Sent from my XT907 using Tapatalk 2
stupid question but...
Where are you getting this build?
straylight said:
Where are you getting this build?
Click to expand...
Click to collapse
Here's the original thread, use the GAPPs from the OP:
http://forum.xda-developers.com/showthread.php?t=2012093&page=26
Here's the post with the revised ROM, thanks to mic213:
http://forum.xda-developers.com/showpost.php?p=40364244&postcount=257
Hyro864 said:
I was having issues with GPS and streaming music thru Bluetooth.
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
Bluetooth problem is with ASOP 4.2.1 builds its fixed in 4.2.2 I think.
edit: sorry for grammatical errors, im still upset it took four hours to get this phone back working again after doing a clean wipe
Interesting, I tried to install it, and was successful...but the keyboard doesnt work, every five seconds, i got a FC with the aosp keyboard. tried looking for another keyboard, but i cant type it in, so i guess i may have to put the apk on my sd card...also wifi doesnt want to turn on...is there no launcher in this rom? the home button doesnt work
to add, i have unlocked the bootloader, so im thinking this is a cosunmer-turned-into-a-dev phone...but i read that the rom was hybird...i really dont like safestrap, as it takes long to build a slot, so i figured unlocking the bootloader would be easy enough...but no...im using cwm 6.0.x
Herc08 said:
edit: sorry for grammatical errors, im still upset it took four hours to get this phone back working again after doing a clean wipe
Interesting, I tried to install it, and was successful...but the keyboard doesnt work, every five seconds, i got a FC with the aosp keyboard. tried looking for another keyboard, but i cant type it in, so i guess i may have to put the apk on my sd card...also wifi doesnt want to turn on...is there no launcher in this rom? the home button doesnt work
to add, i have unlocked the bootloader, so im thinking this is a cosunmer-turned-into-a-dev phone...but i read that the rom was hybird...i really dont like safestrap, as it takes long to build a slot, so i figured unlocking the bootloader would be easy enough...but no...im using cwm 6.0.x
Click to expand...
Click to collapse
Which build are you using?
Sent from my XT907 using xda premium
Leraeniesh said:
Which build are you using?
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
the beta i think, it was on hashofcodes' goo account...it is 4.1.2, i cant remember the date it is
however, i figure out how to install stock roms with an unlocked bootloader
Herc08 said:
the beta i think, it was on hashofcodes' goo account...it is 4.1.2, i cant remember the date it is
however, i figure out how to install stock roms with an unlocked bootloader
Click to expand...
Click to collapse
Try mic213's latest builds (last few pages of CM10 thread)
Sent from my XT907 using xda premium
Leraeniesh said:
Try mic213's latest builds (last few pages of CM10 thread)
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
Yeah the one on Hash's account is buggy ATM
Sent from my XT907 using Tapatalk 2
Hmm thanks. That's the one many threads recommend
Sent from my Carbon-ize Evita using xda-developers app
RikRong said:
Here's the original thread, use the GAPPs from the OP:
http://forum.xda-developers.com/showthread.php?t=2012093&page=26
Here's the post with the revised ROM, thanks to mic213:
http://forum.xda-developers.com/showpost.php?p=40364244&postcount=257
Click to expand...
Click to collapse
^^^Just a few posts above yours. Try it out. It seems to be the most stable build.
Herc08 said:
edit: sorry for grammatical errors, im still upset it took four hours to get this phone back working again after doing a clean wipe
Interesting, I tried to install it, and was successful...but the keyboard doesnt work, every five seconds, i got a FC with the aosp keyboard. tried looking for another keyboard, but i cant type it in, so i guess i may have to put the apk on my sd card...also wifi doesnt want to turn on...is there no launcher in this rom? the home button doesnt work
to add, i have unlocked the bootloader, so im thinking this is a cosunmer-turned-into-a-dev phone...but i read that the rom was hybird...i really dont like safestrap, as it takes long to build a slot, so i figured unlocking the bootloader would be easy enough...but no...im using cwm 6.0.x
Click to expand...
Click to collapse
Hyro864 said:
I was having issues with GPS and streaming music thru Bluetooth.
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
Yes， streaming music thru Bluetooth won't work in cm10
GPS hasn't been tried yet , I don't use this.
so any fixes on CM10 gps? Someone said to flash to a stock based rom, get a gps lock then flash CM10.
which roms are stocked based?
once you get a gps lock, when installing CM10, do you do a clean wipe in CMW?
mightmuki said:
so any fixes on CM10 gps? Someone said to flash to a stock based rom, get a gps lock then flash CM10.
which roms are stocked based?
once you get a gps lock, when installing CM10, do you do a clean wipe in CMW?
Click to expand...
Click to collapse
Stock ROMs you can get here , or you can use this
I have succes after next:
1. Install AU mod
2. Lock GPS
3. Reboot to TWRP
4. Wipe cache / dalvik and factory reset (DO NOT WIPE SYSTEM)
5. install CM10 % GAPPS
6. Just enjoi! ):laugh:
St.Noigel said:
Stock ROMs you can get here , or you can use this
I have succes after next:
1. Install AU mod
2. Lock GPS
3. Reboot to TWRP
4. Wipe cache / dalvik and factory reset (DO NOT WIPE SYSTEM)
5. install CM10 % GAPPS
6. Just enjoi! ):laugh:
Click to expand...
Click to collapse
Its okay to flash an AU rom in for USA ?
mightmuki said:
Its okay to flash an AU rom in for USA ?
Click to expand...
Click to collapse
Do you mean in Verizon XT907?
I flash AU on my XT907 Verizon. It`s OK. But i have 2G.. I don`t know what about LTE or 3G operators..
mightmuki said:
so any fixes on CM10 gps? Someone said to flash to a stock based rom, get a gps lock then flash CM10.
which roms are stocked based?
once you get a gps lock, when installing CM10, do you do a clean wipe in CMW?
Click to expand...
Click to collapse
Every ROM listed for the RazrM (so far) is stock based, except CM10 and CM 10.1 . All the ones posted in this forum and DroidRzr were designed to be used with Safestrap and they are based on stock. Yes, you need to do a clean wipe for any ROM you install. However, I flashed Rage two nights ago and wiped cache/dalvik, factory data reset, but I DID NOT wipe system. It flashed perfectly. After you wipe, reboot recovery and mount system. After you wipe, TWRP says the system is mounted, but it is not. If you flash CM, you will need to flash a stock boot.img before you can go back to stock ROM.
RikRong said:
Every ROM listed for the RazrM (so far) is stock based, except CM10 and CM 10.1 . All the ones posted in this forum and DroidRzr were designed to be used with Safestrap and they are based on stock. Yes, you need to do a clean wipe for any ROM you install. However, I flashed Rage two nights ago and wiped cache/dalvik, factory data reset, but I DID NOT wipe system. It flashed perfectly. After you wipe, reboot recovery and mount system. After you wipe, TWRP says the system is mounted, but it is not. If you flash CM, you will need to flash a stock boot.img before you can go back to stock ROM.
Click to expand...
Click to collapse
AOKP is AOSP based too... We just got a port of it
Sent from my XT907 on CM10.1 using Tapatalk 2
sloosecannon said:
AOKP is AOSP based too... We just got a port of it
Sent from my XT907 on CM10.1 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, I forgot about that one.
Hello,
I'm sorry if this is a repost of any sort . I am currently running a 4.1.2 rom and as it turns out any 4.1.2 rom that I run will have a functioning camera for my phone. However whenever I try to flash any 4.2 .2 rom on my phone the camera ceases to run correctly. I'm flashing the rom with clockworkmod touch and I have also tried flashing a camera fix I found on xda. I have even tried using third party camera apps, but those don't work either. Can anyone try to point me in the right direction or even try to help me troubleshoot this thing??
Thanks in advance
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
i'll begin with the question of what did you wipe before you flashed 4.2.2 and what ROM/release have you tried flashing?
Flash to factory stock and if ur camera still doesn't work it must logically be a hardware issue. Please guys correct me if I'm wrong
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
xBeerdroiDx said:
i'll begin with the question of what did you wipe before you flashed 4.2.2 and what ROM/release have you tried flashing?
Click to expand...
Click to collapse
I had just updated cwm to the latest touch version about a month ago. After that I was still on stock TW 4.1.1. Then, I tried flashing a 4.2.2 jellybam v7.6 and the camera stopped working so I flashed back to stock and the camera worked fine. I then tried flashing to the latest realease of CM 10.1 nightly
about 3 weeks ago but the camera didnt work so I flashed to 4.1.2 CSROM v1.4 then 1.5 and the camera worked fine. So I then tried CM10.0 4.1.2 and the camera still worked so last night I flashed to the latest CM nightly and the camera stopped working. Any thoughts?
Cprager said:
Flash to factory stock and if ur camera still doesn't work it must logically be a hardware issue. Please guys correct me if I'm wrong
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I did and it still works. So it can't be a hardware issue. It has to do with how my phone flashes the software because I haven't seen anyone else having the same issues with the ROMS that I have been flashing.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
AaronYoLungz said:
so last night I flashed to the latest CM nightly and the camera stopped working. Any thoughts?
Click to expand...
Click to collapse
if the camera stopped working simply from updating your current ROM to the latest release than a wipe and reflash could possibly have ironed out this issue. this is assuming you dirty flashed the update. we all do that, but in the event things dont funtion properly afterwards, a wipe is required.
xBeerdroiDx said:
if the camera stopped working simply from updating your current ROM to the latest release than a wipe and reflash could possibly have ironed out this issue. this is assuming you dirty flashed the update. we all do that, but in the event things dont funtion properly afterwards, a wipe is required.
Click to expand...
Click to collapse
Well before I flashed any rom I always wiped all user data, I wiped the cache and dalvik cache and in some cases I even formatted the system in advanced settings. In every case the camera never worked.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
If it could help, I can get a report of the crash... The only thing is I would need guidance on going about getting it.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
i would back everything up. you have a working nandroid to fall back on?
then i would fully wipe the device and start over. you seem to be having problems with 4.2.2, not specifically aosp. it appears aosp and touchwiz 4.1.1 and 4.1.2 are working for you. correct? when transitioning android versions, its basically required to wipe everything in order to avoid issues. make sure you have the latest gapps for 4.2.2. that may be your problem right there.
in the event you choose to wipe and reflash a 4.2.2 rom,
- backup your files
- have a nandroid, the rom you want and gapps on a micro sd card.
- boot into recovery
- wipe data/factory reset
- wipe cache
- wipe dalvik
- format /system
- format /data + media
- flash rom from external sd card
- flash gapps from external sd card
- reboot and let your phone sit a few minutes then reboot again. check it out.
you wont get any ROM support from devs on your issues until you come from a complete wipe. a hassle to set everything up again but it will likely be your fix. if not, we can go a different direction.
Alright I'll try this now. I will keep you updated
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
AaronYoLungz said:
Alright I'll try this now. I will keep you updated
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
did you make sure you were flashing the correct gapps for your version of android? i'd hate to see you do all this for an incorrect gapps issue. yes, keep me posted
xBeerdroiDx said:
did you make sure you were flashing the correct gapps for your version of android? i'd hate to see you do all this for an incorrect gapps issue. yes, keep me posted
Click to expand...
Click to collapse
Alright I followed all of the above steps and my phone camera still isnt working. For clarification, gallery app works but when I actually try to use the camera I get a "Camera Error - Cannot connect to camera " popup window with an okay button below it.
AaronYoLungz said:
Alright I followed all of the above steps and my phone camera still isnt working. For clarification, gallery app works but when I actually try to use the camera I get a "Camera Error - Cannot connect to camera " popup window with an okay button below it.
Click to expand...
Click to collapse
what ROM and release did you end up flashing?
xBeerdroiDx said:
what ROM and release did you end up flashing?
Click to expand...
Click to collapse
ROM: cm-10.1-20130521-NIGHTLY-d2att
Gapps: gapps-jb-20130301-signed
EDIT: The problem described in the post#11 has always been the case
i would do 1 of 2 things: flash this 4.2 camera zip in recovery and see if that camera and gallery work or flash a different 4.2.2 ROM like tasks. this will help determine if its just cm10.1 thats giving you grief.
if you download and flash the 4.2 camera, just wipe cache, dalvik and flash the zip. in the event you get a freeze up when taking a picture with auto-focus, you have to set the scene to "Action" mode.
hit me back
xBeerdroiDx said:
i would do 1 of 2 things: flash this 4.2 camera zip in recovery and see if that camera and gallery work or flash a different 4.2.2 ROM like tasks. this will help determine if its just cm10.1 thats giving you grief.
if you download and flash the 4.2 camera, just wipe cache, dalvik and flash the zip. in the event you get a freeze up when taking a picture with auto-focus, you have to set the scene to "Action" mode.
hit me back
Click to expand...
Click to collapse
Should I remove Gallery4.apk and Gallery2.apk from /system/app?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
You can use a file Explorer to move those 2 to a different folder so that you can move them back if need be
xBeerdroiDx said:
You can use a file Explorer to move those 2 to a different folder so that you can move them back if need be
Click to expand...
Click to collapse
Alright so I ended moving the gallery, then flashing the new camera app in CWM then wiped the cache and dalvik. No luck, so I tried restarting my phone, fixing permissions, and nothing worked. I then full wiped my phone and flashed Vanilla Rootbox, tested camera and it didnt work. It still said "Camera Error- Can't connect to camera" . . I flashed the camera zip provided followed by a cache and dalvik wipe but I got the same message. Following the above steps I did the exact same thing with AOKP and the exact same thing happened.
Is it possible that my phone just can't support 4.2.2?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Is it possible that an outdated version of Odin could be the problem?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Every 4.2 roms i tried to flash, either with CWM ou TWRP ends up with a status error 0. I did a full data wipe before trying to install the zips
CWM version is 6.0.1.9
TWRP version is 2.4.1
math_green20 said:
Every 4.2 roms i tried to flash, either with CWM ou TWRP ends up with a status error 0. I did a full data wipe before trying to install the zips
CWM version is 6.0.1.9
TWRP version is 2.4.1
Click to expand...
Click to collapse
I kept getting CM10 rebooting on me then I found this thread which solved it for me.
http://forum.xda-developers.com/showthread.php?t=1966230&highlight=cm10
Do i need to install from stock ics?
I'm running Pac-Man atm
I tried all day, same result... Status error 0 in cwm when i try to install the zip... Still running Pac-Man 4.1.2, i think i'm missing something here
math_green20 said:
I tried all day, same result... Status error 0 in cwm when i try to install the zip... Still running Pac-Man 4.1.2, i think i'm missing something here
Click to expand...
Click to collapse
I was previously running Dman's ICS daily driver ROM.
Can someone post me a quick how-to? The usual way does not work for me : (
Sent from my SGH-I927 using xda app-developers app
math_green20 said:
Can someone post me a quick how-to? The usual way does not work for me : (
Sent from my SGH-I927 using xda app-developers app
Click to expand...
Click to collapse
Info on CWM Error Msgs.
http://forum.xda-developers.com/showthread.php?t=2230733
And I think you may have to read this too:
http://forum.xda-developers.com/showthread.php?t=633246
Problem solved, i dont know what was wrong. I had to flash cm10.1. I just gave up trying to flash rootbox.
Sent from my Xperia Play using xda app-developers app