Related
Hi i've found in Toch package one film with the same shape of display,someone know if this are spare part or is additional protection and should be placed?
Today my friend show me his Htc touch with this "film" placed and so is start discussion with him about the use destination.
Thank you in advance.
It has to be placed as it is called a screen protector. Not using one would lower your PDA resell value has you will probably get scratch on your screen after a few weeks.
Be carefull when setting this up, as it need a very clean screen, and a dust (nearly) free environment. A bathroom after a hot shower is the perfect place to set this up.
Yes, it is a screen protector. It is a bit ticky to fix. To make it easy to align you may sprinkle some water on the adhesive side and apply to the screen and align. Gently press out thewater with a stiff paper and also to displace air pockets. If some water droplets still remain under the sheet do not bother. It will all dry out within 3 days and result in a clear bright screen.
Thank
thank guys, was thinking is spare part because the default protections of display look like removable and so i've supposed replacement part.....but wasn't
Ok just placed
I'll have mine by the end of the week.
I store mine in my pocket and it seems the protector would peel off from repeatedly taking it in and out of your pocket since the screen is flush.
Anyone have any experience with this?
Does anyone knows if these HTC protectors (not some cheap 'fits all' protector) can be bought seperately? I applied mine right after i've got my phone it but was a bit sloppy with all the excitement and when re-fitting it some dust got underneath it, leaving me small airbubbles. If anyone has a link to how/where, it'd be much appreciated.
you can remove it, wash with some soap and then apply it once again, no need to buy a new one.
The HTC ones can be removed, washed and re-applied too? Can someone confirm this, coz I only read this could be done with the better ones from expanys or something
where to buy protector film?
T-mobile told me to go to dangaard.com
but i can not find the accesory's for the touch and the site is only for store's
so i went back to the the store asking if they can order the screen protectors for me the did not want to order it for, but i got one extra from there demo model, so my tip is.. go to shop and ask if they have spare protector from the demo model
How about the exim screen protectors? I have heard that those are "high quality" films... (pda-now.com)
expansys has some good ones, PPCTech and ORA: http://www.expansys.com/a.aspx?i=149713&atype=SCREPROT
Proporta ones are decent too www.proporta.com
Wondering if anyone try this
http://cgi.ebay.com/CP-FULL-BODY-SC...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Really want to know how good they are, they claim to be totally protective. I am a bit skeptical, any thoughts?
I have been very happy with these skins from Boxwave. Very easy to slip on when needed. Used these with my Trinity as well. I have not tried the ones with the cover. The Touch with skin is still smaller than the Trinity.
http://www.boxwave.com/products/flexiskin/flexiskin-htc-touch_2727.htm
Edit:
Just noticed they offer a Skin + ClearTouch screen protector package
http://www.boxwave.com/products/bun...skin-and-cleartouch-bundle-htc-touch_2727.htm
This is something similiar to what I post earlier, they warrant for the life of your device that you will never get a single scratch on it after you provide their full body protective film. Wouldn't this be cool, without the bulk of a case, yet, still achieve the same protection. If anyone have a chance, browse thru their site ,they have a video demonstration to show u the force thatf film able to withstand.
http://www.shieldzone.com/item_description/HTCTOU.html
Wondering if anyone have experience with it.
Seed123 said:
The HTC ones can be removed, washed and re-applied too? Can someone confirm this, coz I only read this could be done with the better ones from expanys or something
Click to expand...
Click to collapse
I'm interested to know this too, is washable?
Some photos...
I personally don't like the front cover, the shiny effect doesn't look right in this phone (at least for me), the back cover is fine....
The installation is more or less easy, after some minutes the covers really stick to the phone, if you don't like the result you can remove very carefully the covers, wash them and repeat the process again
Pros:
- Removable and washable.
- Resistant (apparently).
- Inexpensive.
Const:
- A bit shiny for my taste.
- Good for scratches but not to drops
--------------------
Talking about the original HTC protective film... Yep! it is washable
What the.....CONDENSATION!!!!!
thaihugo said:
It has to be placed as it is called a screen protector. Not using one would lower your PDA resell value has you will probably get scratch on your screen after a few weeks.
Be carefull when setting this up, as it need a very clean screen, and a dust (nearly) free environment. A bathroom after a hot shower is the perfect place to set this up.
Click to expand...
Click to collapse
man! are u really serious. i mean a bathroom and especially after a hot shower wud be the last place i wud attempt to do something like sticking a protective film on my PDA. i mean think a little science man. after a hot shower condensation [stage when the vapor above cools back to liquid] is surely a threat inside a bathroom, and while you try to stick the film, condensed vapor or mist to be precise might come in between your pda and the film. then all you will ever have is a smudged all white screen which you cant wipe off even, cos its between the layers.
so i m jus telling you cos i had seen a lot of incidents like this specially where hot vapor just cooled off is around!!!!!
No harm done! Just my scientific mind thinking a lot!!!!!!!
.....
i did a post some days ago about shieldzone. i used the invisible shield for a couple of days and the only thing thats really terrible is the reflection of the cover, as you can see in the pix abough.
so i searched again for a good display protection and bought a product from 3M, named vikuiti, armr200. for me its the best i ever saw.
# Anti-Fingerprint Layer
# 2 times Anti-Reflection Coating
and a very strong material.
i tried a lot to scratch the layer, but it was not possible.
Look at this, its a german site. if you google for it you'll find a site in your language for sure.
http://www.schutzfolienscout.de/vikuiti-armr200-schutzfolie.html
I have the 3M Vikuiti, armr200 for my Fujitsu P1610. It works quite well, not totally clear like those crystal clear type films, so you will lose some contrast and clarity, but for anti-reflective, it's the best you can buy. (and it's quite pricey).
One bad thing is that it reduces outdoor visibility quite a bit, you'll need to crank your backlight for outdoor use.
And it still shows fingerprints, actually they are quite noticeable due to the AR layer, but it's much easier to clean than other AR coatings.
One thing though, unless 3M is going to make one specifically for the HTC Touch, it will be a PITA to cut to the proper shape, since the clear cover is not a rectangular shape.
ayyu3m said:
man! are u really serious. i mean a bathroom and especially after a hot shower wud be the last place i wud attempt to do something like sticking a protective film on my PDA. i mean think a little science man. after a hot shower condensation [stage when the vapor above cools back to liquid] is surely a threat inside a bathroom, and while you try to stick the film, condensed vapor or mist to be precise might come in between your pda and the film. then all you will ever have is a smudged all white screen which you cant wipe off even, cos its between the layers.
so i m jus telling you cos i had seen a lot of incidents like this specially where hot vapor just cooled off is around!!!!!
No harm done! Just my scientific mind thinking a lot!!!!!!!
Click to expand...
Click to collapse
I wouldn't worry about it, I've used the steamy shower "poor man's clean room" technique many times, never had an issue with condensation stuck under the film. If anything, any liquid will help to avoid air bubbles and can be squeegeed out. Some films (namely 3M's paint protection films) require liquid to install properly.
I have been using Realook on my vibrant for 3 weeks now and its PERFECT, no button issues or loss of glass feel.
I ordered an extra Realook and got a printout with it that says some of the Realook screens shipped for Vibrant/Captivate have dents on them which usually go away in a few weeks, if not then they will replace it for you.
Just wanted to let everyone know in case yours came with a dent and you still have it. If you do, then you can get an exchange by emailing support at realook.us
and mentioning in subject line about the replacement
also include your amazon/ebay order no. and other info...
Just wanted to mention this here so you don't look at that one tiny dent and wonder, if you are the only one with this problem
where are you guys purchasing your realook screen protectors from? cheapest I found is 10.99 on Amazon. Thanks!
Got mine from amazon. That's acode for an extra 10% off
Sent from my SGH-T959 using XDA App
VICosPhi said:
Just wanted to mention this here so you don't look at that one tiny dent and wonder, if you are the only one with this problem
Click to expand...
Click to collapse
By 'dent', does that mean the air bubble around the speaker?
Got mine on ebay. I read on the forum that some of the amazon orders were taking a couple of extra days to ship.
10% off at Amazon.com
2ZDLV2W5 expires on 09/31/2010.
damn just paid for mine on ebay yesterday too, was trying to find the code before I purchase, it's ok tho only a few bucks.
It took me 10 minutes to install mine prefectly with no bubbles at all. None!
Not even near the ear piece speaker.
It's hard surface protects soooo much better than the rubbery feeling ones. It's a different brand, but same quality that I found for my G1.
rembonjaski said:
By 'dent', does that mean the air bubble around the speaker?
Click to expand...
Click to collapse
Good point, that could be the case. I still have that tiny airbubble near speaker, otherwise perfect...I'd like one without bubble but don't want to put it on again unless I visit partical accelerator or hubble telescope manufacturing facility
What do you guys recommend on installing the Realooks screen protector? Dry or wet application? I installed a Zagg-like SP on my vibrant and hated it. But I must say I did a "professional job" when I installed it. I did it using a spray bottle and it worked like a charm. Can I do the same with Realook?
Goog1e Phone said:
What do you guys recommend on installing the Realooks screen protector? Dry or wet application? I installed a Zagg-like SP on my vibrant and hated it. But I must say I did a "professional job" when I installed it. I did it using a spray bottle and it worked like a charm. Can I do the same with Realook?
Click to expand...
Click to collapse
Realook is a dry application.
Bumping this to give everyone who doesn't already know a heads up... don't be fooled like I was into thinking your Realook is washable. Wait let me rephrase that. Don't be fooled into thinking your Realook is washable and that you'll be able to get it back on there like new. Cause nothing could be further from the truth! My god, the amount of time I've wasted trying...
It washes just fine, the problem begins when you try to dry the damn thing. Air, clots, blowdryers, etc. All useless. I could not even get it close to acceptable.
Trust me, save yourself time and aggravation. Just order another set lol.
You must be doing something wrong or have a bunch of dust floating around. I've washed mine and it's still perfect.
Try this, like the instructions say. Spray water in the air to avoid dust particles from floating around. Also clean it with warm water. I washed mine using a mix of 50% water/ 50% alcohol.
It will take some time after you put it back on to look good again. Let it dry and don't use a blow dryer or anything that will blow dust around, you'll just get frustrated.
HTH
Sent from my SGH-T959 using XDA App
jrizk07 said:
You must be doing something wrong or have a bunch of dust floating around. I've washed mine and it's still perfect.
Try this, like the instructions say. Spray water in the air to avoid dust particles from floating around. Also clean it with warm water. I washed mine using a mix of 50% water/ 50% alcohol.
It will take some time after you put it back on to look good again. Let it dry and don't use a blow dryer or anything that will blow dust around, you'll just get frustrated.
HTH
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
So wait, you let it air dry or you let it dry while it's on the phone? When I let it air dry a lot of water spots remain. I couldn't clean them off properly without something adhering to the protector.
vapotrini said:
So wait, you let it air dry or you let it dry while it's on the phone? When I let it air dry a lot of water spots remain. I couldn't clean them off properly without something adhering to the protector.
Click to expand...
Click to collapse
With the 50/50 mix it should dry with no water spots. or the water spots could be because you have hard water?
either way the 50/50 mix will help, let it air dry for about a minute then put it on your phone. It'll look like it's slightly wet underneath but it will dry, just make sure it's not soaking otherwise you may damage the phone. A little moisture is not going to hurt and the alcohol should evaporate anyway.
jrizk07 said:
With the 50/50 mix it should dry with no water spots. or the water spots could be because you have hard water?
either way the 50/50 mix will help, let it air dry for about a minute then put it on your phone. It'll look like it's slightly wet underneath but it will dry, just make sure it's not soaking otherwise you may damage the phone. A little moisture is not going to hurt and the alcohol should evaporate anyway.
Click to expand...
Click to collapse
Thanks a lot for the response. Gonna try this this tomorrow...
Let us know how it turns out.
Sent from my SGH-T959 using XDA App
StefanB86 said:
10% off at Amazon.com
2ZDLV2W5 expires on 09/31/2010.
Click to expand...
Click to collapse
Same code still works 2ZDLV2W5 expires 2/28/2011
is it better than what you get at tmo store? if not ill just stic to this 25$ one from tmo lol
bartek25 said:
is it better than what you get at tmo store? if not ill just stic to this 25$ one from tmo lol
Click to expand...
Click to collapse
allot better
I cannot stand the installation procedure needed for the screen protectors. Every single time: I use the "provided micro fiber" cloth to remove dirt and lint and the apply. EVERY TIME I am left with tiny lint,, micro specs of air dust etc. between the film and the screen, and a small little bubble here and there. It drives me crazy. Call me obsessive compulsive but it take me about 3 screen protectors until I finally get it right. Anyone aware of any screen protection technology that will help me avoid this outcome?
I don't, but I did read that if you apply it in the bathroom after running hot water and steaming it up real good that it will help that problem a lot. I plan to try that when I get my first screen protector this week.
Sent from my SAMSUNG-SGH-I897 using XDA App
Hard type screen protectors will solve your bubble issues. Martin Fields screen protectors is pretty much impossible to have bubbles stuck inside it.
However it won't solve your dust problem. If anything, it's much easier to see dirt and other imperfections stuck between the screen and a Martin Field protector.
Or you could try one of the crystal screen protectors from boxwave. I had your problem too with my first 2 screen protectors, and it seemed that I couldn't just get them on there without a problem. With this one from boxwave, I just wiped it off with the provided micro-fiber cloth and used the bubble-elimination card to remove any possible bubbles under the screen!
http://www.boxwave.com/
Get the ones from ATT. I have tried Bodyguardz, Zagg, Stealth Guards, and some generic BS from eBay. All of those were the type you apply with the solution (and have that dreaded orange peel look) and you have to wait for it to "cure" and it is extremely easy to get bubbles stuck in them.
The ones from ATT on the other hand, are completely smooth and truly invisible. They are a stiffer material and you do not need application solution. I am very happy with them and for 9.99 you get 3 of them. If you mess one up by getting some lint on it or whatever, you can just wash it with soapy water and spray it down with some water+baby soap and re apply it that way. Very easy to get the air bubbles out that are caused by using the solution. Again, they can be installed with no solution at all and if done carefully, it should look like nothing was ever installed on the phone
http://www.wireless.att.com/cell-ph...038&q_sku=sku4770252&q_manufacturer=&q_model=
I got them from a local store for 7$ since I got a discount. Those above ^^ from BoxWave seem extremely over priced. For 10$ you can't go wrong with the ones from ATT.
I am using clarivue not even a single dust, lint, inside. It's the quick and easy 3 layer type screen protectors.
Here's a tip ... go to the bathroom and turn on hot water on sink or whatever to create humidity that would trap the dust or w/e in the air ... and it makes this easier to apply.
I haven't had a screen protector on my Vibrant in almost 2 months now & even with constantly putting it in my pocket with my keys, dropping it once onto my driveway & even fumbling it into bouncing off a brick wall one time I have yet to scratch my screen. The rest of the phone is dented & scratched but the screen is still beautiful.
Siks said:
I haven't had a screen protector on my Vibrant in almost 2 months now & even with constantly putting it in my pocket with my keys, dropping it once onto my driveway & even fumbling it into bouncing off a brick wall one time I have yet to scratch my screen. The rest of the phone is dented & scratched but the screen is still beautiful.
Click to expand...
Click to collapse
+1
I had my iPod Touch for years, in and out of pockets with keys and pocket-knives and cell phones, dropped countless times, two little kids messing with it all the time, accidentally sliding it face-down across surfaces, and so on. Never used a screen protector, never got a single blemish or scratch. And that was basically plain old arsenic-free glass. The Captivate is made with Corning's high-tech Gorilla Glass.
Sure, either could still scratch or break. But it's like getting a car with an expensive paintjob, and then covering the whole thing in Scotch tape so it won't get scratched. You end up with something that looks god-awful 100% of the time, because you're afraid something might happen to it that would affect how it looks. Pretty much any time someone hands me their smartphone or DS, it is a scratched, smudgy, dusty mess because of some $40 screen cover they have on there. I always try to point out that it seems odd to make your screen look terrible on purpose just because you're afraid of you might make it look terrible on accident. I used one good one once, that you couldn't even tell was there, but the first time I took it on a flight it turned into smears of rainbows.
use a piece of clear packing tape to remove the dust. running the shower helps bring dust down but there will be some lint from the cloth. dont lean over it, a lot of "dust" is dry dead skin or dandruff so if you have dry skin or dry scalp dust will fall on it. also stop being so anal.
Siks said:
I haven't had a screen protector on my Vibrant in almost 2 months now & even with constantly putting it in my pocket with my keys, dropping it once onto my driveway & even fumbling it into bouncing off a brick wall one time I have yet to scratch my screen. The rest of the phone is dented & scratched but the screen is still beautiful.
Click to expand...
Click to collapse
+1
I don't need no stinkin' screen protector. I mean unless I know my phone is going to be dragged across macadam but then a screen protector won't help, will it.
Gorilla Glass... Screen Protector unnecessary... I have always used a screen protector too on previous phones but the screen on this phone is rugged.
I used to be the same way as you guys, "I don't need a screen protector because it's been through everything and still works perfectly!!" Yet, one day I found a scratch on my screen that I have no idea whatsoever where it came from. So, I got this Boxwave ClearTouch Crystal screen protector, and you literally cannot tell it is on there. It feels just like the glass (con for me actually, I prefer a paper kind of feel) and doesn't scratch easily at all. Plus, I installed it in a dusty room and there was no lint or anything else under the screen. It even comes with a thick card to remove bubbles once it has been applied. So, if you're even slighty, .000001% scared of getting lint trapped underneath the screen, go with Boxwave. I vouch for its clarity and ease of installation. Also, my screen is just as sensitive as before, as I've tried BARELY touching the screen and it still would pick up a touch.
And, in the rare event that you did get dust glued to the screen, it is completely washable and rewashable, so it is a little expensive, but well, well worth it.
Oh, and there is no adhesive whatsoever, not even water is needed. Just peel and go.
magnumrt562 said:
Gorilla Glass... Screen Protector unnecessary... I have always used a screen protector too on previous phones but the screen on this phone is rugged.
Click to expand...
Click to collapse
i listened to this
totally terrible advice. not that i care but i have about 20 microscratches and a couple decent sized ones....
it takes time to learn how to put screen protectors on... I have probably put 500 or so on all different types of phones you just wipe it clean tilt it so that you can make sure there are no dust particles... then you pull the backing off of the protector a few inches apply to the designated area and take a credit card and follow the rest of the protector down... works everytime
iamamp3pimp said:
i listened to this
totally terrible advice. not that i care but i have about 20 microscratches and a couple decent sized ones....
Click to expand...
Click to collapse
I second this . there is no such thing as 'unscratchable glass' some very expensive sunglasses use to have that warranty , guess what , they dont anymore ...
although I have to say the argument about HAVING YOUR PHONE LOOK UGLY JUST IN CASE SOME ACCIDENT CAN HAPPEN TO MAKE UGLY made me laugh , I d never have a phone without one my advice :
Just buy a few cheap ones on eBay and master the trick when your bored , after 3 times it should be installed perfectly , I also noticed if you have light scratches already on it , the screen protector hides them so thats a bonus
Ive tried SO many screen protectors. The only one I have been happy with so far (and VERY happy at that) is Realook. They are SUPER clear, thin, and very hard. You do not lose the glassy feel or the crisp vivid look on the screen. Ive put them on a few phones now, a few Vibrants and a Mytouch Slide 3g (my gf didnt even know i had put it on there till i told her). Its $10 for 2 protectors and I HIGHLY recommend them.
http://cgi.ebay.com.sg/REALOOK-AT-T-Samsung-Captivate-AFP-Screen-Protector-2PK-/250674134359
Siks said:
I haven't had a screen protector on my Vibrant in almost 2 months now & even with constantly putting it in my pocket with my keys, dropping it once onto my driveway & even fumbling it into bouncing off a brick wall one time I have yet to scratch my screen. The rest of the phone is dented & scratched but the screen is still beautiful.
Click to expand...
Click to collapse
I have a tiny little chip right in the middle of my screen on my Captivate about a cm underneath the AT&T logo. It has taken less abuse than yours, and it even has a screen protector on it. It looks like the kind of chip you would get if a piece of gravel hit your windshield a little too hard.
Your mileage may vary.
Hydrocharged said:
I used to be the same way as you guys, "I don't need a screen protector because it's been through everything and still works perfectly!!" Yet, one day I found a scratch on my screen that I have no idea whatsoever where it came from. So, I got this Boxwave ClearTouch Crystal screen protector, and you literally cannot tell it is on there. It feels just like the glass (con for me actually, I prefer a paper kind of feel) and doesn't scratch easily at all. Plus, I installed it in a dusty room and there was no lint or anything else under the screen. It even comes with a thick card to remove bubbles once it has been applied. So, if you're even slighty, .000001% scared of getting lint trapped underneath the screen, go with Boxwave. I vouch for its clarity and ease of installation. Also, my screen is just as sensitive as before, as I've tried BARELY touching the screen and it still would pick up a touch.
And, in the rare event that you did get dust glued to the screen, it is completely washable and rewashable, so it is a little expensive, but well, well worth it.
Oh, and there is no adhesive whatsoever, not even water is needed. Just peel and go.
Click to expand...
Click to collapse
Thanks for the info on the Boxwave screen protector, I've been wandering if it's as good as it looks.
In the malls near me now, there are little carts (you know those areas of the mall, where the cart/carny people are) that have people with small steady hands...
Invisible Shield it is called. They give you a lifetime warranty on the cover. They put it on. They will even cover your entire phone if you want (the back of the Captivate I am thinking of getting covered to avoid scratches on the metal back), and if you get a replacement phone for some reason, you only pay a portion of the price (material only) and they put it on again.
They use some sort of silicon liquid (snake oil... was probably just water) to aid in putting it on, and mine is perfect. Had a couple bubbles with the liquid still in it, but true to their word, it evaporated (through the protector) and it was perfect the next morning.
I jumped at this opportunity after totally FAILING at putting on a protector on my Tilt 2 (two packs of 3). On that phone, I took an exacto knife to cut off the excess I was so bad at it. I gladly paid $20 to have someone else do it and give me a warranty on it.
Invisible Shield. Check out your local mall.
Jeepsdaddy said:
I cannot stand the installation procedure needed for the screen protectors. Every single time: I use the "provided micro fiber" cloth to remove dirt and lint and the apply. EVERY TIME I am left with tiny lint,, micro specs of air dust etc. between the film and the screen, and a small little bubble here and there. It drives me crazy. Call me obsessive compulsive but it take me about 3 screen protectors until I finally get it right. Anyone aware of any screen protection technology that will help me avoid this outcome?
Click to expand...
Click to collapse
I think the gorilla glass is pretty resilient. Check out this youtube vid.
http://www.youtube.com/watch?v=6xASJobjD68
I thought I'd just do a poll, this really could apply to any phone so I put this poll in a popular phone forum section. I remember for my SGS2, it took 7 tries (ie 7 protectors) to get one on perfectly, ie no dust no bubbles whatsoever. That equated to a total wastage of $30+ before finally nailing one.
Just got a new phone (Note 2), bought the Steinheil Ultra Crystal. 1st one in the pack, about 10 pieces of dust. 2nd one in the pack, 3 pieces of dust. Total wastage, $18. FML
I have found if it's not on perfect 1st time, lifting it up to dab away dust with scotch tape introduces more dust.
Apply it in your bathroom with some steam generated by hot shower or crane.
Helps preventing dust particles under your protector
Send from my GT-I9300 with Tapatalk
Jeurum_92 said:
Apply it in your bathroom with some steam generated by hot shower or crane.
Helps preventing dust particles under your protector
Send from my GT-I9300 with Tapatalk
Click to expand...
Click to collapse
What I find helpful is place the phone on a newspaper. Do not use cloth because it would only create cloth particles and sticking them onto your phone as your breath when applying the screen. In addition, wipe off the screen with a clean cloth dampened with a little ethyl alcohol. Allow the screen to dry and then use another cloth (the ones that come with your screen protectors) to wipe off. Make sure you do this under as much lighting as possible. Once you don't see any specs of dust on the screen start lining up the screen protector from one end of the phone so you know exactly how the screen looks on the phone. The final steps involve peeling off the cover and laying it on the screen. Do this slowly. Press down on the screen as you peeling off the cover. I would not peel off the screen and then stick it onto the phone. This will most likely increase your chance of getting minute dust particles sticking on the screen. Always check for dust on the screen as you go. If you see any, stop right away and blow it off and reapply. This method does not completely prevent the dust particles from sticking onto the screen protector but it will minimize it.
One. I clean the phone with my shirt and water. Clean it with the microfiber cloth. Peel about 1/8 inch off the screen protector, apply to phone slowly while removing film and use the card provided in screen protector box to flatten it our with bubbles. Any bubbles and I lift slightly and re apply. Easy peezy
Sent from my SGH-I747 using Tapatalk 2
---------- Post added at 07:13 PM ---------- Previous post was at 07:12 PM ----------
And the last protector I put on I did it in my work truck!
Sent from my SGH-I747 using Tapatalk 2
Use the Hinge method
Just bought a 100x screen protectors for $20 time to try this out
where I work, we have controlled rooms to avoid particulate in the materials, I tried in these rooms, and I can assure that it's better to do it in the shower (LOL)
Or you can buy one of these protectors that include an spray, it's completely safe to put on of these, even in the case you screw it up, you can remove it, and apply more spray and put the protector again.
(i will never buy a normal protector after use the ones with an spray included)
I use the hinge method, works first time most times even in a room with lots of dust.
is it really possible to do it perfectly?
that, I got to see.
I tried it so many times I even can't remember, and I never succeeded.
Anyhow I gave up
Sent from my GT-N8000 using xda app-developers app
None. My gorilla glass is nearly unscratchable. Phone was dropped face down on cement and just a tiny micro scratch on the bezel.
Sent from the superior hTC EndeavourU
Tw1tchy said:
None. My gorilla glass is nearly unscratchable. Phone was dropped face down on cement and just a tiny micro scratch on the bezel.
Sent from the superior hTC EndeavourU
Click to expand...
Click to collapse
Take it to the beach and see if you can say that again.
None. My gorilla glass is nearly unscratchable. Phone was dropped face down on cement and just a tiny micro scratch on the bezel.
Sent from the superior hTC EndeavourU
Click to expand...
Click to collapse
Wow you are so lucky your screen didnt break! hope not to come off as patronising but these things break so easy....get that thing some protection man. Mine broke on its first fall.
I've wasted so many with specs of dust ruining it I do them all after I've had a shower while still naked and hot water running and it works every time.
Tellymon said:
Wow you are so lucky your screen didnt break! hope not to come off as patronising but these things break so easy....get that thing some protection man. Mine broke on its first fall.
Click to expand...
Click to collapse
I don't see how a screen protector saves a screen from smashing tho. Gorilla glass is good and I find the closer they are to the lcd the better smash protection.
rlatjs17 said:
Take it to the beach and see if you can say that again.
Click to expand...
Click to collapse
Lucky only rocks on the beaches where I live.
Sent from the superior hTC EndeavourU
You guys should try out the SGP Curved Crystal... its freking amazing feels as if theres nothing on your screen.
I got my screen protector on first try...
Currently using a cheapo screen protector I bought from eBay for like a dollar.
Honestly, there's nothing to it.
Clean screen>Placement>Credit card to lightly remove air bubbles>Peel>Microfiber to remove any smaller bubbles.
Bam!
I've been using BestSkinEver for all my devices. Perfect application on first try everytime. That's probably the nature of wet application ones though.
Sent from my SGH-T999 using xda premium
Hinge method. Then if there's particals trapped beneath, use tape to remove them.
Sent from my SGH-T999 using xda app-developers app
I always use belkin ones, every time it goes on perfect.
Here's a tip if you are getting a lot of dust under it.
Take 2 sticky tapes and place one on the corner of the screen. Lift your protector up with one piece of tape and get that dusty ***** underneath it with the other one.
Also a very good tip! If you are experiencing a lot of dust in your environment whilst placing the protector. Place the protector in the bathroom after a long shower! No kidding!
It helps to clean the apartment first - seriously-
I scratched my icarez glass protector this afternoon, I knew it was a bad ides to just throw my phone in my bag but that's why I got a protector. Now I have about a 1 inch scratch down the middle and it annoys me almost as much as if my actual screen was scratched.
Am I crazy for wanting to buy a new one now? 10$ isn't crazy but I should probably try and pace myself.
randyspants said:
I scratched my icarez glass protector this afternoon, I knew it was a bad ides to just throw my phone in my bag but that's why I got a protector. Now I have about a 1 inch scratch down the middle and it annoys me almost as much as if my actual screen was scratched.
Am I crazy for wanting to buy a new one now? 10$ isn't crazy but I should probably try and pace myself.
Click to expand...
Click to collapse
I wonder what was in the bag. As all protector companies use terms like 9H hardness usually everything except sand will make such a scratch. So either they are all lying (which of course they are) or something special was in the bag (which I doubt).
Marketing BS sucks
Haha ya nothing special, some plastic headphones and some paperwork. Maybe it was a staple from that or just the zipper on the way in/out. Either way not mad one bit just amused at myself for wanting to replace the protector for doing its job and taking a scratch
I would replace it. Depending on how deep the scratch is it still turn into a crack which isn't fun.
Same i got the Nillkin 9H one, i got a small scratch on it...
Sent from from my LG-D855
My Spigen randomly cracked on my D850, I don't think there was a scratch. Also don't forget its still glass and it will eventually break depending on how deep of a scratch it is.
The only thing I could get to scratch the protector was a serrated kitchen knife. A screwdriver, scissors, keys, etc. couldn't do it.
My Nillkin one scratched in under a week.
I was on a morning flight one day and had the phone resting on my belly/lap whilst taking a nap, when I woke up I found it scratched an inch down the centre, I think it may be from the seat belt buckle.
I ordered a bepak one as that had moulded holes around speaker grille and sensor rather than a big cutout, during the time the bepak arrived a crack formed across the top separate from the original scratch.
Never again Nillkin.
MrDerrickC said:
My Nillkin one scratched in under a week.
I was on a morning flight one day and had the phone resting on my belly/lap whilst taking a nap, when I woke up I found it scratched an inch down the centre, I think it may be from the seat belt buckle.
I ordered a bepak one as that had moulded holes around speaker grille and sensor rather than a big cutout, during the time the bepak arrived a crack formed across the top separate from the original scratch.
Never again Nillkin.
Click to expand...
Click to collapse
I've ordered a Bepak one today as well... read good reviews about it till now. Lets see how it holds out. I have a tendency to keep my phone in my bag while gymming & stuff so hopefully it holds a little longer that the normal ones do.
On the main topic though, just be glad you had a screen protector on atleast! That scratch directly on the screen and it would've costed far more than 10$! Then again, you're not crazy about wanting to replace it right away.. the G3 is a piece of beauty and a scratch makes it really annoying everytime you see it.
if4ct0r said:
I've ordered a Bepak one today as well... read good reviews about it till now. Lets see how it holds out. I have a tendency to keep my phone in my bag while gymming & stuff so hopefully it holds a little longer that the normal ones do.
On the main topic though, just be glad you had a screen protector on atleast! That scratch directly on the screen and it would've costed far more than 10$! Then again, you're not crazy about wanting to replace it right away.. the G3 is a piece of beauty and a scratch makes it really annoying everytime you see it.
Click to expand...
Click to collapse
In my opinion, the nillkin is probably softer then the screen itself. It scratched up too easily.
The bepak feels "harder"
Sent from my LG-D855 using Tapatalk
MrDerrickC said:
In my opinion, the nillkin is probably softer then the screen itself. It scratched up too easily.
The bepak feels "harder"
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
Strange isn't it. Both mention 9H hardness. Yet one feels softer and scratches easily. I guess you cant't really trust what these guys mention on their product description.
I wouldn't worry about it as long as actual screen us not damaged. I would wait until the protector screen actually damaged or cracked.
I had my nexus 4 for over a year without a screen protector and still don't see a scratch on it.
This lg has the same glass I believe. Gorilla glass 3 I think. I don't think a screen protector is needed though maybe it would help with keeping the glass from shattering. I'm not sure though. I would get one if that is the case.
Sent from my LG-D851 using XDA Free mobile app
I might take some hate for saying this, but I've always been an advocate of the plastic screen protectors. I've tried the glass, and encountered the same problems that you states, OP. I find that the plastic ones work better for me.
There was a ton of marketing and advertising for the glass stuff, but I think that it was a little over the top. The plastic is better in my opinion.
dianestory2 said:
The plastic is better in my opinion.
Click to expand...
Click to collapse
How is that?
It's considerably more difficult to put on without getting bubbles.
It's considerably less panel-breaking protective.
It's considerably less scratch resistant.
It's considerably less smooth.
These, by the way, are not personal judgments but facts
Plastic screen protectors attract a crap load more finger prints and are harder to clean off compared to glass.
Cailifu brand on Amazon claims to carry a 1 year warranty. Came with the exact same inserts and application tools as the icarez
Sent from my LGLS990 using XDA Free mobile app
Does the screen protector just protect from scratches or would it also help with a drop?
Sent from my LG-D851 using XDA Free mobile app
I am using a glass protector for now 1.5 month and not a single scratch yet! It's however significantly thicker than plastic one! Sometimes I feel the touch less responsive.. It also catches fingerprint and dirt like a magnet lol (probably no oleophobic coating) I found the G3 screen itself very very good! your finger just slips fluently across the screen and barely catches any fingerprint! I installed one just for extra protector I'd say worth it if you don't mind cleaning your screen more frequently
Pfeffernuss said:
How is that?
It's considerably more difficult to put on without getting bubbles.
It's considerably less panel-breaking protective.
It's considerably less scratch resistant.
It's considerably less smooth.
These, by the way, are not personal judgments but facts
Click to expand...
Click to collapse
1) not if done the right way
2) agreed
3) I've never ever ever had a scratch on my phone, plastic or glass
4) only a little.
For my personal lifestyle, I don't really care that much about all of that. I'm glad you are so supportive, though