Develop Bugs

Do you use a screen protector?

Does anyone use a screen protector on their Nitro? Has anyone actually been able to scratch the screen?
I was looking into a Ballistic HardCore case, but I see that it comes in a full housing and the plastic screen protector on it kind of ruins the view of the IPS display (one of the major selling points of the Nitro). So with Gorilla Glass 2 coating is it really worth it to lower the display quality a little bit to get the protection?

Technocian said:
Does anyone use a screen protector on their Nitro? Has anyone actually been able to scratch the screen?
I was looking into a Ballistic HardCore case, but I see that it comes in a full housing and the plastic screen protector on it kind of ruins the view of the IPS display (one of the major selling points of the Nitro). So with Gorilla Glass 2 coating is it really worth it to lower the display quality a little bit to get the protection?
Click to expand...
Click to collapse
Yes. I dropped my nitro and the screen cracked, a couple of days AFTER i removed my screen protector. So yea. You should.

I cracked my screen after dropping it while it had a protector on it.
I took mine off I've had it off quite a few months now the glass is tough but I did manage to scratch it. I work construction and I'm very hard on my phone.
I can be bothered with anymore screen protectors they just mark up and dull the screen.
Over all this phone has fallen upwards of 15 ft and I've been lucky its held on well.
I also don't use a case at all.
Sent from my LG-P930 using xda premium

keenz said:
I cracked my screen after dropping it while it had a protector on it.
I took mine off I've had it off quite a few months now the glass is tough but I did manage to scratch it. I work construction and I'm very hard on my phone.
I can be bothered with anymore screen protectors they just mark up and dull the screen.
Over all this phone has fallen upwards of 15 ft and I've been lucky its held on well.
I also don't use a case at all.
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
You sir, are lucky. Mine has fallen a distance of 3 ft and cracked my screen... twice. Both with and without a screen protector.
If you want to go with just a screen protector, I recommend Zagg, just put it on right. You don't even notice the "orange peel" look with the screen on; in fact, I don't even realize I have a screen protector on when the screen is on. The Ballistic case is very sturdy though, and after my replacement digitizer comes in, I will be using it again. Another point to consider, if you have the extended battery, the ballistic case will not fit.

lordcheeto03 said:
You sir, are lucky. Mine has fallen a distance of 3 ft and cracked my screen... twice. Both with and without a screen protector.
If you want to go with just a screen protector, I recommend Zagg, just put it on right. You don't even notice the "orange peel" look with the screen on; in fact, I don't even realize I have a screen protector on when the screen is on. The Ballistic case is very sturdy though, and after my replacement digitizer comes in, I will be using it again. Another point to consider, if you have the extended battery, the ballistic case will not fit.
Click to expand...
Click to collapse
No screen protector will stop a crack from a drop a the right angle, but they should all protect from scratching. I am weary on using the Ballistic HardCore case since it will add so much bulk and take away the beauty of the screen with it's plastic window. It pretty much makes the phone just short of bullet proof though, so I can see why people spring for it.
I just ordered some Xtremegaurd ones since there is a 80% off coupon code. Zagg would have been nice, but not enough money for that. Will report back and state whether or not it takes away from the screen.

I'd recommend ghost armor aswell, doesn't dull the quality at all.
Sent from my LG-P930 using xda app-developers app

Technocian said:
No screen protector will stop a crack from a drop a the right angle, but they should all protect from scratching. I am weary on using the Ballistic HardCore case since it will add so much bulk and take away the beauty of the screen with it's plastic window. It pretty much makes the phone just short of bullet proof though, so I can see why people spring for it.
I just ordered some Xtremegaurd ones since there is a 80% off coupon code. Zagg would have been nice, but not enough money for that. Will report back and state whether or not it takes away from the screen.
Click to expand...
Click to collapse
Yeah, Ballistic is definitely tough. As you pointed out, the only real flaw I see with it is the plastic screen cover. And about the size; I have an extended battery. The only real world difference I notice between the Ballistic case and the extended battery + cover is the contour. I know it is bigger all around, but I just can't notice the extra size; just the different shape.
I have been tempted to try popping the plastic cover out of the case and just using the Zagg protector.. it's not like the plastic cover keeps water from getting in, or dust from getting in, or as an extra layer of protection against drops...

I've scratched my screen a little. One decent scratch. I ordered a refurbished ballistic hc with no screen protector.
Sent from my LG-P935 using xda app-developers app

I dont use screen protectors. Cant stand them. I barely have a belt bag for mine althought i might get a BarelyThere cover. Its feels very good just the phone itself without cover unlike the first 2 Atrix models, which i had. I hardly drop my phones or even scratch them. The only phone i ever damaged digitizer was my first touch pro2 with keys in my pocket. It was no biggy but the scratch was there. Since then if i use phones in pockets i make sure nothing else is there.
Sent from my LG-P930 using xda premium

webbles17 said:
I've scratched my screen a little. One decent scratch. I ordered a refurbished ballistic hc with no screen protector.
Sent from my LG-P935 using xda app-developers app
Click to expand...
Click to collapse
See? This is the kind of stuff that makes me debate whether or not I want to enjoy the naked screen to use a protector and lose some clarity.
Isn't Gorilla Glass not supposed to scartch? Decisions decisions.

Technocian said:
See? This is the kind of stuff that makes me debate whether or not I want to enjoy the naked screen to use a protector and lose some clarity.
Isn't Gorilla Glass not supposed to scartch? Decisions decisions.
Click to expand...
Click to collapse
Zagg all the way then! I honestly can't even tell I have a screen protector on my phone when I'm using it. I see no loss of clarity, but I also gain the good conscious of knowing my screen won't scratch if I accidentally shove my phone in my pocket with my keys and some pocket change or if I happen to set it face-down, or anything else.
And Gorilla Glass is only scratch resistant, but that doesn't mean it's scratch-proof. The first few months I had my phone I made absolute certain I never put it in my pocket with anything that could damage it, I cleaned it with the rag I use to clean my glasses, and just overall watched over it like a hawk. Somehow I still managed to put a couple barely noticeable scratches on the screen. So I would say at the very least, go with a screen protector... also, in the off-chance that you DO end up shattering your digitizer, that screen protector will keep trash from having the rather unlikely opportunity to get inside and wreak havoc on your LCD if the break is bad enough.

lordcheeto03 said:
Zagg all the way then! I honestly can't even tell I have a screen protector on my phone when I'm using it. I see no loss of clarity, but I also gain the good conscious of knowing my screen won't scratch if I accidentally shove my phone in my pocket with my keys and some pocket change or if I happen to set it face-down, or anything else.
And Gorilla Glass is only scratch resistant, but that doesn't mean it's scratch-proof. The first few months I had my phone I made absolute certain I never put it in my pocket with anything that could damage it, I cleaned it with the rag I use to clean my glasses, and just overall watched over it like a hawk. Somehow I still managed to put a couple barely noticeable scratches on the screen. So I would say at the very least, go with a screen protector... also, in the off-chance that you DO end up shattering your digitizer, that screen protector will keep trash from having the rather unlikely opportunity to get inside and wreak havoc on your LCD if the break is bad enough.
Click to expand...
Click to collapse
Basically, the screen will scratch whether or not it's gorilla glass if it comes into contact with sand. You'd be surprised at how often that can happen. Metal is softer than the screen so it can't scratch it.

hereric said:
Basically, the screen will scratch whether or not it's gorilla glass if it comes into contact with sand. You'd be surprised at how often that can happen. Metal is softer than the screen so it can't scratch it.
Click to expand...
Click to collapse
That tidbit of information means that a few grains of sand in your pocket are more likely to scratch a screen than rubbing against pocket change or keys. Even the Ballistic case will let debris get inside the case and between the screen and the plastic cover. I don't know how many times I would thoroughly wipe the screen and the case, carefully put it together, and admire how clean it was. Drop it in my pocket for a little bit and pull it out only to find specks of pocket lint under the plastic. It was a never-ending cycle!

nope, had Armor and took it off. still scratch free
Sent from my LG-P935 using Tapatalk 2

Don't waste money on...

Expensive glass screen protectors like glassTr or whatever else. I got one of the 8$ tempered glass screen protectors off eBay and. Have been rocking it about a month now. Thing looks beautiful and is tempered and oleophobic or whatever it's called. Went on perfect the first time and I love the feel if the glass. Just like the original screen. Have had zero issues with touch sensitivity or anything
Sent from my HTCONE using xda app-developers app

I agree. Spent $5.00 from ebay and about 3 weeks shipping from China. I even purchased another one just case .

Can you post some ebay links?
John.

I'm sure these glass protectors look good initially, but what I'd be interested in seeing is how they hold up long term after several months. My understanding is some of the cheaper glass protectors have issues lifting at the edges due to poorly made adhesive. I have an iLoome incoming and I'm worried even it will have lifting issues.
This seems to be the cheapest seller currently. http://www.ebay.com/itm/Perfect-Qua...l_Phone_Screen_Protectors&hash=item51b23a2b92

+ 1
I actually had a spigen glass screen protector before , removed it due to bad installation and bought a 8$ one . Found to be exactly the same. no issues what so ever.
Spigen and mime or w.e they are , are all ripoffs. just buy a aftermarket one. They also replace it for free if its not delivered to you in pristine condition.

Well I got this Armor Suit tempered glass screen protector from Amazon for my HTC One and am pretty much satisfied with its quality and features...
http://www.amazon.com/ArmorSuit-Mil...1&keywords=Glass+Screen+Protector+for+HTC+One
and I like this tempered glass screen protector pretty much..!!!!

circuit ptextrns
I'm going to have to invest although I can never get the damn things on without bubbles :crying:

N345H said:
I'm going to have to invest although I can never get the damn things on without bubbles :crying:
Click to expand...
Click to collapse
Much sure you are applying in a relatively dust free area. Bubbles that won't come out are usually dust getting stuck between the screen and the protector. The glass protectors are less likely to get bubbles from non dust issues. I bought a MIME and while expensive at 25 bucks, it came with a tack sheet that removes any dust that you might not see.
If the cheap glass protectors work for you, great. 25 bucks is not a lot to spend on a 600+ phone in my opinion.
---------- Post added at 08:23 AM ---------- Previous post was at 07:44 AM ----------
Jimmy2u said:
Well I got this Armor Suit tempered glass screen protector from Amazon for my HTC One and am pretty much satisfied with its quality and features...
http://www.amazon.com/ArmorSuit-Mil...1&keywords=Glass+Screen+Protector+for+HTC+One
and I like this tempered glass screen protector pretty much..!!!!
Click to expand...
Click to collapse
That is not a glass screen protector. I have had them. They are made of plastic. If you can get them on without bubbles, they work great but there is a stickiness to them that some like, I do not, so I wanted a real glass protector.

N345H said:
I'm going to have to invest although I can never get the damn things on without bubbles :crying:
Click to expand...
Click to collapse
I like the water trick. Clean it up real good with the provided cleaning cloth and make sure its 100% dry. Then mist the screen with a spray bottle and apply the screen protector. Use the card to work out bubbles. Works every time.

khhhhris said:
I like the water trick. Clean it up real good with the provided cleaning cloth and make sure its 100% dry. Then mist the screen with a spray bottle and apply the screen protector. Use the card to work out bubbles. Works every time.
Click to expand...
Click to collapse
I agree to a point. If even the smallest dust particle gets on the screen after cleaning it, you will get a bubble that is difficult, if not impossible, to remove. It is hard to have a "dust free" environement in a home.
The nice thing is I have wrecked a few of the plastic film protectors and the companies always just sent a new one.
I have had probably 20 devices over the past 2 years so I think I have tried about every brand of protector on the market
The glass protectors are the best for me. They feel like using the naked device. The plastic protectors always have a "sticky" feel to them and none lasted more than a few months before having issues with edge peel, discoloring, etc.

I had a Muvit Screen Guard for about 8 euro's.
It included two of these large protectors fitting screens up to 6.8" and you have to cut out to the right size yourself. They worked splendid for me. I sent in my HTC One for repair and the repair people scratched the screen, or rather the protector. Not a single thing on the real glass though so mission accomplished! And the scratches on the protector were pretty deep, so I agree. A cheap protector is just as good at protecting against reasonable damage done by keys or other sharp edges in say, your pocket or purse.
Now I'm using the screen protector the repair center included when sending my device back home.

Mike02z said:
I agree to a point. If even the smallest dust particle gets on the screen after cleaning it, you will get a bubble that is difficult, if not impossible, to remove. It is hard to have a "dust free" environement in a home.
The nice thing is I have wrecked a few of the plastic film protectors and the companies always just sent a new one.
I have had probably 20 devices over the past 2 years so I think I have tried about every brand of protector on the market
The glass protectors are the best for me. They feel like using the naked device. The plastic protectors always have a "sticky" feel to them and none lasted more than a few months before having issues with edge peel, discoloring, etc.
Click to expand...
Click to collapse
A few people has posted to turn the hot water on with the shower running. Let it get steamy in there and it will take the dust out of the air. Then put your screen protector on in the bathroom and the dust element should be eliminated.
Sent from my HTC6500LVW using Tapatalk

I 'wasted' my money on a GlassTr screen protector for my One. Was a little suspicious of the Ebay ones - probably wrongly so. It was I think very expensive but has fitted well and thus far working well. I'll never go back to those plastic 'things' again. Managed to get one spec of dust trapped under but other than that it's crystal clear, very smooth to the touch and phone just as responsive to the touch. Too early to comment on how it's wearing but looks good so far.

I got one of the cheapie eBay ones. I've had it about two months and haven't had any issues, save one... The glass doesn't completely cover the screen. You would think it would cover the entire black area on the face, but mine was cut about 1mm too short! Since it does cover the entire visual area, I decided it didn't bother me enough to go through the process of replacing it.
I used the hinge method, and did not have any issues with bubbles or dust on the screen.
http://www.youtube.com/watch?v=PMPqDwVZzzM

Normally the saying goes, you get what you pay for. True for many things, however there are always exceptions. Going to try one of these! Thanks

I took the advice every one has suggested to fit screen protector tape down one side as hinge in bathroom with hot water running washed hands cleaned phone and screen even cleaned screen protector before removing plastic and it went on like a dream. Bought my screen protector from empire but can't recommend them due to carry on getting sent a protector packaged in thinner cardboard than a cereal pack so received it smashed then they sent me another in better packaging but doesn't say empire anywhere so not sure if it's there's but it works and iam happy although mine doesn't fully cover black area it's out about 2 to 3 mill but doesn't bother me .
Sent from my HTC One using xda app-developers app

Yeah I Agree

I've got the iloome, it's been on two months now and I've not had one problem.

I got a glass protector from ebay and I have a huge bubble in the lower left hand corner. Do those go away or should I reapply?

You could just buy tech amor screen savers from amazon, free replacements for life. I requested a new set of 3 and I got it for free, didn't pay postage or anything. Basically free screens for a while.

[Screen Protector] SPIGEN GLAStR Nano Slim Tempered Glass

Hi guys,
I just installed the Spigen GLAStR Nano Slim Tempered Glass Protector. I bought it off Amazon and it came pretty quick despite the holidays. I've attached pictures of the glass on my Nexus 5. Sorry I didn't get pictures of the installation process. I didn't want to risk getting dust underneath, so I had to do it quick.
I used the "Hinge Method" to put the screen on. And as you can see I got slight bubbles at the bottom (circled in red), so the installation wasn't perfect. I also have 1 tiny micro bubble in the middle...it's hardly noticeable even with the screen off/on and is probably less than .5mm in diameter. I would still suggest using this method for any screen protector installation.
After about 30 minutes, I used a micofiber cloth-covered squeegee to push out those bubbles that were circled...and they're gone! I just have that tiny ass one in the middle.
Overall it feels great, and its definitely smooth with the oleophobic coating...I haven't put my Cruzerlite case on yet, gonna give it some time for the glass' adhesive to settle in. I will comment on that soon!
Any questions? Feel free to hit me up!
Best,
K
Amazon link: http://www.amazon.com/dp/B00GN1L626/ref=twister_B00GN1L3Q0

Tempered Glass w/ Cruzerlite Case On
Hi all,
Just an update here. I let the glass sit overnight and all the bubbles were gone..even that micro bubble in the middle of the screen. This morning, I slapped on my Cruzerlite TPU case, to see if there was any peeling of the glass, or any fit issues.
Initially, it seemed everything was fine. However, after I got to work, I noticed that in the left bottom corner, the case began to push the glass up a little, especially if I pushed on that edge. As such, I decided to remove the case to prevent any more issues.
Spigen's GLAStR screen protector seems like a good one, but I think if they increased the edges 1mm in each direction, the Cruzerlite case would sit on top and sort of seal the glass rather than hit edge-to-edge like in this case, causing the glass to begin peeling. I've attached pictures to show what it looks like with the case on.
Let me know if you have any questions!
K

Thanks for the review. I got one as a replacement from the previous defective ones.
As I have not applied mine yet, can you describe what is the "Hinge" method?
Cheers

MaelstromXC said:
Thanks for the review. I got one as a replacement from the previous defective ones.
As I have not applied mine yet, can you describe what is the "Hinge" method?
Cheers
Click to expand...
Click to collapse
Sure. The Hinge method is where you take the screen protector and tape it to the phone BEFORE you peel the protective film away.
1) Align the screen protector to exactly where you want it
2) Tape one side of the protector so that you can swing it open like a door (tape in two places..I put a piece near the power button and one a little further down
3) Open up the "door" that you just made and clean your naked screen so there is no lint, dust, hair etc.
5) Make sure the protector aligns just as you want it
4) Then peel the "backside" of the film off so that the adhesive side is exposed and "close the door" so the protector is on the phone
5) Immediately take a squeege and cover it in a micofiber cloth and push out any bubbles you may have
6) Peel away the front of the screen protector
7) Using the squeegee that's inside the cloth (VERY IMPORTANT so you don't scratch the glass), push out any remaining bubbles
8) DONE! ENJOY!
Here's an example: http://www.youtube.com/watch?v=dt9_fZDT-As
Best,
K

Nice review and a +1 for the hinge method. Only way to install a 'dry' screen protector for me!

Just received mine today. Install went great except I noticed an air bubble on the left side about halfway down, right on the edge. Well, when I took a closer look, it was actually a chip in the glass.
Contacted Spigen Support and I am waiting for a response. Hopefully they can help me out.
Sent from my Nexus 5 using XDA Premium 4 mobile app

eyeisdasteve said:
Just received mine today. Install went great except I noticed an air bubble on the left side about halfway down, right on the edge. Well, when I took a closer look, it was actually a chip in the glass.
Contacted Spigen Support and I am waiting for a response. Hopefully they can help me out.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That sucks! I hope they are responsive. Did you go with the hinge method as well during installation? I noticed that my glass is slightly off to the right.. Didn't get it perfect.. Oh well.
Sent from my Nexus 5 using Tapatalk

KTT16 said:
That sucks! I hope they are responsive. Did you go with the hinge method as well during installation? I noticed that my glass is slightly off to the right.. Didn't get it perfect.. Oh well.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I didn't go for the hinge method. But I have used it in the past and it works pretty well.
The chip is pretty small so its not interfering with anything on the screen, as long as it doesn't get worse.
Spigen sent me an email back with a case number and said I should be contacted within 1-3 business days. Hoping for the best!
Sent from my Nexus 5 using XDA Premium 4 mobile app

Saved my phone!
Im not 100% sure HOW it saved my phone, but im sold on them and will be buying a replacement!
my son likes to hide my phone, last night he hid my phone under my recliner (which hits the floor when rocking) and as i was rocking away i heard CRACK / CRUNCH....looked under the chair to find my phone with two very prominent pressure cracks on the screen...
i thought NO WAY was this ONLY the Nano.TR....as i pulled up the corners, the glasses started breaking and falling apart, but low and behold, not a single scratch or dent on my phones screen!
Completely blown away that my phone's screen didn't crack under the pressure.....sold on them forever!

eyeisdasteve said:
I didn't go for the hinge method. But I have used it in the past and it works pretty well.
The chip is pretty small so its not interfering with anything on the screen, as long as it doesn't get worse.
Spigen sent me an email back with a case number and said I should be contacted within 1-3 business days. Hoping for the best!
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So because of the chip in the edge of the protector it ended up just cracking across the screen.
I can't feel the crack but you can see it.
No email back from Spigen yet. Buy I did update them on the hairline crack across.
Still hoping for the best.
Sent from my Nexus 5 using XDA Premium 4 mobile app

Reminds me if my car's windshield... that was a couple hundred down the tube... Lol.. good luck!
Sent from my Nexus 5 using Tapatalk

Still no email back from Spigen. Its been almost 7 days with no response. They said I would get an email back in 1-3 days. -.-'
Sent from my Nexus 5 using XDA Premium 4 mobile app

It's the first time I try a glass screen protector, this one is very wonderful. There is only a micro-chip somewhere, but I can't see it in normal conditions, I have to examine my screen closely for like one minute to spot it.
Putting it on the screen was very easy, much easier than plastic screen protectors.
It fits nicely with official Google bumper case.

Without a case?
Hey guys, I personally want to buy this Spigen protector (.tr version) because I hate cases on my mobile phone. I'm not going to waste €36 (yes, its the Netherlands) if I also have to apply a case on it. So is this screenprotector drop-proof? If I drop this phone from 1 meter from the surface, would it be able to save the ORIGINAL glass?
Thanks,
Viresh

VireshRamcharan said:
Hey guys, I personally want to buy this Spigen protector (.tr version) because I hate cases on my mobile phone. I'm not going to waste €36 (yes, its the Netherlands) if I also have to apply a case on it. So is this screenprotector drop-proof? If I drop this phone from 1 meter from the surface, would it be able to save the ORIGINAL glass?
Thanks,
Viresh
Click to expand...
Click to collapse
They recommend a case with this product because they say the protector would crack easily without any case over time.

Ano59 said:
They recommend a case with this product because they say the protector would crack easily without any case over time.
Click to expand...
Click to collapse
What do you mean by "over time", considering my usage, I have only dropped my old phone (SGS+) once in the two years of intensive usage. As SGS+ is a smart strong boy, it doesn't break, not even a scratch. Would the Glas.tR, 0.4 mm, survive a 1 meter downfall? Thanks in advance yo

VireshRamcharan said:
What do you mean by "over time", considering my usage, I have only dropped my old phone (SGS+) once in the two years of intensive usage. As SGS+ is a smart strong boy, it doesn't break, not even a scratch. Would the Glas.tR, 0.4 mm, survive a 1 meter downfall? Thanks in advance yo
Click to expand...
Click to collapse
Well, sorry but I have no idea. It's only written that they strongly recommend using a case along with the glass.

VireshRamcharan said:
What do you mean by "over time", considering my usage, I have only dropped my old phone (SGS+) once in the two years of intensive usage. As SGS+ is a smart strong boy, it doesn't break, not even a scratch. Would the Glas.tR, 0.4 mm, survive a 1 meter downfall? Thanks in advance yo
Click to expand...
Click to collapse
It depends on how it falls obviously, but I'd say chances are pretty good that the glass screen protector would be cracked or chipped after a fall, especially onto a hard surface like concrete. I have the GLAS.t on my N5 and like you I prefer no case and am very careful with my phone. But even just casual daily use, the screen protector has chipped, and it's been the case with several others too (spanning a variety of different brands as well).
So I would proceed with caution and really consider if it's worth sinking the money into. That being said, if the screen protector chips or cracks after a fall, it's taking damage that would otherwise be applied to your phone, which is its purpose to begin with.

b.spec said:
It depends on how it falls obviously, but I'd say chances are pretty good that the glass screen protector would be cracked or chipped after a fall, especially onto a hard surface like concrete. I have the GLAS.t on my N5 and like you I prefer no case and am very careful with my phone. But even just casual daily use, the screen protector has chipped, and it's been the case with several others too (spanning a variety of different brands as well).
So I would proceed with caution and really consider if it's worth sinking the money into. That being said, if the screen protector chips or cracks after a fall, it's taking damage that would otherwise be applied to your phone, which is its purpose to begin with.
Click to expand...
Click to collapse
Thanks man

VireshRamcharan said:
So, a fall from 1 meter above on a hard surface, with the glass .tR 0.4mm applied, straight on its front would prevent the ORIGINAL Nexus 5 glass from cracking? (i know the spigen **** will crack)
Click to expand...
Click to collapse
There's no reason to expect any screen protector would save a phone from a drop. Screen protectors are meant for preventing the glass from being scratched. If the drop is sufficient to damage the screen, I strongly feel it would damage the screen through a 0.4mm sheet of glass overlaying your screen.
Cases, however, are what you use to protect phones from drops.

What's the point of a screen protector?

I thought gorilla glass was supposed to be so strong?
Unless you're keying your screen, why need one? It makes it look dimmer, and they look ugly.
Sent from my SGH-M919 using XDA Free mobile app

Yeah, I never understand it either. You buy a phone with a nice-ass screen and cover it up with some cheap plastic. Almost 2 years, my S4 is still looking good without any screen protectors.

av911 said:
Yeah, I never understand it either. You buy a phone with a nice-ass screen and cover it up with some cheap plastic. Almost 2 years, my S4 is still looking good without any screen protectors.
Click to expand...
Click to collapse
Not to mention air bubbles, they get discolored after a while, you can't enjoy the screen quality, and I looked it up. Apprarently Gorilla glass can get scratched by a steel file, but nothing less.
Basically, unless you're carryimg around an iron file in your pockets, and putting your phone with it, you're good.
And yes, knives, and keys can scratch your screen, but you have to go out of your way to scratch it. It won't scratch if in contact like your pockets or something.
The only real risk of screen damage (realistically I'm real life settings) is dropping it. A screen protector isn't saving that. And if you work construction, a screen protector ain't saving your screen from what ever a gonna damage it on the site.
Sent from my SGH-M919 using XDA Free mobile app

I must admit there is a small scratch on the screen, visible at a certain angle with the screen off, but I don't look at my phone at that angle or with the screen off.

I've had a screen protector and Commuter series Otterbox case on mine since day one. I've only had to change the screen protector like 3 times in almost two years, and that's only because they started losing their resistance to fingerprints. I've never had any problems with air bubbles or screen dimming because I didn't buy el cheapo screen protectors, but they weren't expensive either.
After all this time, I can take off the case and screen protector and my S4 still looks like it did the day I bought it.
It's a small price to pay for keeping your phone in great condition. No doubt the next owner will appreciate it when I decide to upgrade.

tikay00 said:
I thought gorilla glass was supposed to be so strong?
Unless you're keying your screen, why need one? It makes it look dimmer, and they look ugly.
Sent from my SGH-M919 using XDA Free mobile app
Click to expand...
Click to collapse
Strong and scratch resistant...not scratch-proof...big difference.
A good case can protect the screen from taking a skid across concrete just as well though.

I hear spider web makes a great screen protector.
Pp. Lol

KennyG123 said:
Strong and scratch resistant...not scratch-proof...big difference.
A good case can protect the screen from taking a skid across concrete just as well though.
Click to expand...
Click to collapse
This.
Scratching can be done with less than a steel file.
I keep my phone in my front pocket and the only other thing that is ever in that pocket is paper money. Nothing else ever goes in that pocket.
I have 2 small scratches after 18 months. Neither visible when the screen is on...but there none the less. Best I can figure is they are from the metal rivets in my jeans.
A screen protector would have prevented that. But would have also lowered the quality of the screen in the mean time. Its a trade off. And each person has to decide which is more important to them.

Skipjacks said:
This.
Scratching can be done with less than a steel file.
I keep my phone in my front pocket and the only other thing that is ever in that pocket is paper money. Nothing else ever goes in that pocket.
I have 2 small scratches after 18 months. Neither visible when the screen is on...but there none the less. Best I can figure is they are from the metal rivets in my jeans.
A screen protector would have prevented that. But would have also lowered the quality of the screen in the mean time. Its a trade off. And each person has to decide which is more important to them.
Click to expand...
Click to collapse
Been putting my phone in various pockets for the longest time, and absolutely no scratches. I don't know what you guys are doing to your phones. That sucks.
Sent from my SGH-M919 using XDA Free mobile app

Phone case is a different story. Need one. Screen protector, I don't get. I got one with my case, and I don't even use it. These screens do not scratch unless you're very reckless.
Sent from my SGH-M919 using XDA Free mobile app

tikay00 said:
I thought gorilla glass was supposed to be so strong?
Unless you're keying your screen, why need one? It makes it look dimmer, and they look ugly.
Sent from my SGH-M919 using XDA Free mobile app
Click to expand...
Click to collapse
ive thought the same thing. so i didnt use them.
but i only buy flagships and the keep good resale value to put towards my next one.
so in that case, i use them to get the scratches on the plastic and the real screen is still fresh.
i also feel the same about cases! they make your phone look like tupperware!
resale resale resale! plus i dont like ugly beat up looking stuff.

tikay00 said:
Phone case is a different story. Need one. Screen protector, I don't get. I got one with my case, and I don't even use it. These screens do not scratch unless you're very reckless.
Sent from my SGH-M919 using XDA Free mobile app
Click to expand...
Click to collapse
Had 3 deep scratches on my S3. Near as I can tell it was from sharing the pocket with tools every now and then. So not sure about "very" reckless...but maybe only a "little" reckless.

logikism said:
ive thought the same thing. so i didnt use them.
but i only buy flagships and the keep good resale value to put towards my next one.
so in that case, i use them to get the scratches on the plastic and the real screen is still fresh.
i also feel the same about cases! they make your phone look like tupperware!
resale resale resale! plus i dont like ugly beat up looking stuff.
Click to expand...
Click to collapse
Yep only need a phone case. Screen protector is useless unless you're dumb.
Sent from my SGH-M919 using XDA Free mobile app

KennyG123 said:
Had 3 deep scratches on my S3. Near as I can tell it was from sharing the pocket with tools every now and then. So not sure about "very" reckless...but maybe only a "little" reckless.
Click to expand...
Click to collapse
Gotcha
Sent from my SGH-M919 using XDA Free mobile app

Lol, lemme get this straight...
You guys agree that screen protectors are "dumb" and "useless" while at the same time admitting that your screens have scratches on them...
Makes total sense. [/sarcasm]
I'll take the hardly noticeable decrease in screen clarity over scratches any days. You can always change the screen protector for something better, but even minor scratches are permanent. No thank you.

It depends on what screen protector you get, if you get the Chinese protectors 3 in a pack that look and feel like seran wrap you could windup with lose of clarity and a tacky rubbery feel.
Last year I got a Spigen thin air clear case and it came with a screen protector that looked like a rigid piece of plastic and kind of thick, I figured it's included with the case so I gave it a try. Well I was pleasantly surprised at the feel quality and clarity of the protector, you cannot tell that there is a screen protector on the screen, very hard and slick feel on screen and the same sharpness and vivid color of the original plain screen.
It was a ***** putting it on, had to wet the edges to get it on right, in the end it was well worth it.
Spigen screen protectors are considered premium screen protection.
Who knew.
Pp.

The only screen protectors I've ever used was a three pack from Tmo when I bought my S4 and the one that came with my Otterbox. I don't remember the brand of the three pack, but they worked just fine with no noticeable loss in clarity. The Otterbox screen protector has some weird wavy pattern when tilted while the screen is off, but it's otherwise fine. No noticeable loss of clarity with it either. I'm in no rush to get a new 3 pack.
Honestly, I don't know how anyone in this thread can seriously argue against using a screen protector especially considering the cost of the phone they protect. IMO it's right up there with purchasing the phone without insurance.

I grabbed the Otterbox Defender, popped the screen protector that comes with the OB out (because I got tired of little bits of dust getting behind that screen protector from either the charging port, speaker holes, or the headphone jack) and just put a Zagg Invisible Shield on it. On top of the dust getting behind the OB screen protector, it also seemed to add a type of haze to the screen which I didn't like. It obviously detracted from the 1080p HD look. I haven't changed the Zagg shield since I got the device and only very recently have I noticed very small lines appearing at the part of the screen where I swipe to unlock and the keyboard area.

The tempered glass screen protector I have used for the past two years has saved the screen glass two times now. One when a hammer fell out of my hand a couple feet from the floor and hit my phone by my feet. Glass protector cracked but the screen underneath was unscathed. The replacement survived multiple drops face first on concrete over the next year and only gained a couple micro fractures. Replaced that one last week and the screen underneath was still as good as new. Tempered glass protectors don't degrade image quality or hinder finger movement either. I know mine was extreme cases of abuse but they really are beneficial unless you feel like replacing the whole front glass of the phone after a mishap happens.

Flappyraccoon said:
The tempered glass screen protector I have used for the past two years has saved the screen glass two times now. One when a hammer fell out of my hand a couple feet from the floor and hit my phone by my feet. Glass protector cracked but the screen underneath was unscathed. The replacement survived multiple drops face first on concrete over the next year and only gained a couple micro fractures. Replaced that one last week and the screen underneath was still as good as new. Tempered glass protectors don't degrade image quality or hinder finger movement either. I know mine was extreme cases of abuse but they really are beneficial unless you feel like replacing the whole front glass of the phone after a mishap happens.
Click to expand...
Click to collapse
Why would your phone ever be near your feet, or on the ground in general?
Sent from my SGH-M919 using XDA Free mobile app

Found a great film protector

Not many post on XDA but I promise you I do not work for this company lol. I've been searching forever for a good screen protector and glass is off the table. Whitestone is too expensive and I know I'd mess it up! I've gone through several brands of films on Amazon that have good/moderate reviews but they have all had poor coverage or just didn't stick down on the edges, and I consider myself a pro at installing films. Found a new one that claimed it used new technology to create a tpu type film and took a gamble on it as there where no reviews/ratings. I am pleased to announce that with proper care putting it on its flawless, adheres 100% to the sides and is almost unnoticeable by touch or look. (Except for that it's film and not glass) I will note however that be careful installing as the adhesive is very strong, and getting dust out after installing is near if not impossible. I'll post pics tomorrow of the product and a pic of my phone with it installed!
amazon.com/gp/aw/d/B071NY2RXP/ref=yo_ii_img?ie=UTF8&psc=1
... Can't post links yet. It's the JOLOJO film for the Galaxy S8/+ on Amazon. Make sure you get the film not glass protector.

First time post...you are this isn't you selling it?
Sent from my SM-G955U1 using XDA-Developers Legacy app

SEVENEDGE said:
First time post...you are this isn't you selling it?
Click to expand...
Click to collapse
Honestly I just got tired of looking for screen protectors. I made this account on XDA forever ago and decided that since I'd finally found one I'd just like to share my experience to maybe save some others frustration. I always lurk around here, have since the Moto a855 days, just never get on and post.
If someone does decide to try one of these protectors and chimes in that'd be great as I know my low post count doesn't make me look very believable lol

ha. yeah, I suspected some time ago, that an employee or more were making accounts promoting their asian battery, with low post counts.
Sent from my SM-G935V using XDA-Developers Legacy app

Don't know about this one, but I just received a similar TPU-type screen protector. Haven't installed it yet, will reply back after I have.
This is the one I bought: https://www.amazon.com/gp/product/B07121XQWT/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

ChuckL123 said:
Not many post on XDA but I promise you I do not work for this company lol.
[Snip]
amazon.com/gp/aw/d/B071NY2RXP/ref=yo_ii_img?ie=UTF8&psc=1
... Can't post links yet. It's the JOLOJO film for the Galaxy S8/+ on Amazon. Make sure you get the film not glass protector.
Click to expand...
Click to collapse
monkey39 said:
Don't know about this one, but I just received a similar TPU-type screen protector. Haven't installed it yet, will reply back after I have.
This is the one I bought: https://www.amazon.com/gp/product/B07121XQWT/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I would be curious to know how these work with a case.

Mr. Orange 645 said:
I would be curious to know how these work with a case.
Click to expand...
Click to collapse
Well, can't tell you that as I screwed up the install and had to trash it [emoji17]. Couldn't get the bubbles out of it. Very likely my ineptness - been a while since I used anything besides tempered glass.
Sent from my SM-G955U1 using Tapatalk

monkey39 said:
Well, can't tell you that as I screwed up the install and had to trash it [emoji17]. Couldn't get the bubbles out of it. Very likely my ineptness - been a while since I used anything besides tempered glass.
Sent from my SM-G955U1 using Tapatalk
Click to expand...
Click to collapse
Dammit, man!! Now I'll never know!

Mr. Orange 645 said:
Dammit, man!! Now I'll never know!
Click to expand...
Click to collapse
Sorry man, had high hopes for it based on the case problems with tempered glass I've been reading about. Anyway, just ordered a tempered glass one [emoji9] that purports to be "case friendly". We'll see.
Sent from my SM-G955U1 using Tapatalk

I got mine on without bubbles, but I learned very quickly the adhesive is extremely strong on these screen protectors and getting tiny bubbles out is very hard. You have to choose a large one and push it around through all the smaller ones. As far case usage goes, they fit snug and the only case I own is a OtterBox Symmetry which I have no problems with.
In the description and picture it states these have a 9H rating, and while I've had mine on since Friday without any scratches I have to call BS on that claim. They are a tpu film, feel like film, definitely don't feel like glass but are 100% crystal clear. They seems fairly durable compared to some other PET films I've used, and they are much thicker/heavy duty. (Can't tell once applied however)

Orange peel? Or completely flat like PET

tofu- said:
Orange peel? Or completely flat like PET
Click to expand...
Click to collapse
No orange peel at all. 100% smooth like PET. I can't stand wet apply protectors because of the orange peel/clarity so I've never used them. Always stuck to cheap PET and this is very similar.
Like I said though, I can't stress enough to be careful putting it on as it has a very strong adhesive. It is still easy to take off and leaves no residue, but getting dust/dirt/hair out after is impossible. It's not like normal PET that uses static.
I did get a short piece of hair on mine when installing, which I'd normally remove or put on a new film after, but with the adhesive and TPU this seems to have just molded around it and it's almost not noticable. Leaves no air as the protector won't push back up. I'm very OCD with my protectors.
EDIT: Also, another note is that where this is a hard TPU film I have noticed it resist scratches very well but will indent like the wet apply protectors when force is applied such as with a finger nail. It does seem to recover after awhile. Funny how it's a TPU that feels like film. Also, 4 days now and no signs of peeling/no scratches. My phone is in and out of my pants pocket all day long.

ChuckL123 said:
No orange peel at all. 100% smooth like PET. I can't stand wet apply protectors because of the orange peel/clarity so I've never used them. Always stuck to cheap PET and this is very similar.
Like I said though, I can't stress enough to be careful putting it on as it has a very strong adhesive. It is still easy to take off and leaves no residue, but getting dust/dirt/hair out after is impossible. It's not like normal PET that uses static.
I did get a short piece of hair on mine when installing, which I'd normally remove or put on a new film after, but with the adhesive and TPU this seems to have just molded around it and it's almost not noticable. Leaves no air as the protector won't push back up. I'm very OCD with my protectors.
EDIT: Also, another note is that where this is a hard TPU film I have noticed it resist scratches very well but will indent like the wet apply protectors when force is applied such as with a finger nail. It does seem to recover after awhile. Funny how it's a TPU that feels like film. Also, 4 days now and no signs of peeling/no scratches. My phone is in and out of my pants pocket all day long.
Click to expand...
Click to collapse
Use a piece of scotch tape to remove any dust the gets behind it. Just peel up your screen protector then use the tape (sticky side to screen protector sticky side) to pull any dust or hair off the inside.

ShrekOpher said:
Use a piece of scotch tape to remove any dust the gets behind it. Just peel up your screen protector then use the tape (sticky side to screen protector sticky side) to pull any dust or hair off the inside.
Click to expand...
Click to collapse
I tried that. Tape stuck to the adhesive on the film and when pulling off left a mark where the tape was on it. Like I said, the screen protector has a strong adhesive and doesn't use static. Usually only static pet protectors can have dust removed with tape. In this case, the adhesive on the film is stronger than tape.

How's it holding up a week later?

great screen protector
thanks OP for recommending this
I installed mine a bit over a week ago and have to say fairly impressed with it. It is stronger than your normal PET protectors (doesn't get micro scratches easily) and has very strong adhesive as the OP mentioned (great for the edges).
I did buy the case friendly version though instead of the full screen one
https://www.amazon.com/JOLOJO-Protector-Anti-Bubble-Strengthened-Application/dp/B071NZKKT1/ref=sr_1_2?ie=UTF8&qid=1501007553&sr=8-2&keywords=jolojo
As far as install is concerned - If you have a rubber squeegee (had one from the armorsuite products) it will help greatly. Combine that with the hinge method and you will get a really good install.
Cons
You have to be pretty damn exact for the borders. There is really no room for error.
Not glass but I am definitely happy with it.

I bought a wet install film screen protector and I am loving it... No touch sensitivity issues, easy to install, and self heals scratches... I have used it on on a few past phones as well as smartwatches and have never had any issues with them.
https://www.amazon.com/ArmorSuit-Pr...ung+galaxy+s8+plus+armorsuit+screen+protector

It’s Supershieldz for me.

Got these today. Chuck is right, they are somewhat a pain to install but the result is great. Recommend.

Does the material of the Jolojo feel rubbery like other films do or is it smoother with less friction?
Sent from my SM-G955U using Tapatalk