Develop Bugs

Screen protect

I looking for the best screen protect for my capy
Sent from my SAMSUNG-SGH-I897 using XDA App

Took three tries and a slight trim of the long edge, but 3 ANTI GLARE Screen LCD for Samsung Captivate Galaxy S off ebay gave me what I want: a bubble free matte screen installation. item #380262378182.

Thanks I going to order from ebay

You don't NEED a screen protector.
The Samsung Galaxy S has Gorilla Glass from Corning.
Check a torture test here (on a Dell Streak, which I also have - but it has the same glass) and tell me if you really need a lousy plastic sheet on your beautiful screen.

Check out the gorilla glass website. The got a pictireo of a gorilla with its arse up in the air kissing a pane of glass LOLS
Sent from my SAMSUNG-SGH-I897 using XDA App

FWIW, My phone hangs out in my pocket all day, every day, with keys and loose change etc. I have zero scratches on the glass and the naked glass feels much better than any screen protector IMHO.

Don't get yourself all worked up over choosing the "right" screen protector. Just buy the 3 pack from at&t and call it good
Sent from my SAMSUNG-SGH-I897 using XDA App

Steinheil protectors are fantastic -- only ones I've found that don't leave smudges and fingerprints all over. (They do dull the screen a bit, but since the amoled screen is too bright to begin with, that's not a problem IMO.)

ninjuh said:
Don't get yourself all worked up over choosing the "right" screen protector. Just buy the 3 pack from at&t and call it good
+1
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I897 using XDA App

itsjustaphone said:
FWIW, My phone hangs out in my pocket all day, every day, with keys and loose change etc. I have zero scratches on the glass and the naked glass feels much better than any screen protector IMHO.
Click to expand...
Click to collapse
Look at it in the sun at an angle so it reflects the sun off the screen, you will see lots of micro scratches. This is on both our captivates. Sure, they're not "SCRATCHES" like the usually unsightly ones, they are just micro, or super thin.

Just because it can handle an impact doesn't mean it's scratch resistant. Personally have used the Phantom Skinz protector in the past and am currently using the Realook protector now. If you like the slight rubbery feel of the "skinz" type of protector you have plenty of options. I used the Phantom Skinz because it seemed to have the least orange peel look. After exchanging my captivate for another one (I had the random shut down issue) I used the Realooks static style screen protector. I prefer this one since it's almost nake glass feeling and I can totally say it can take a decent scratch. I got a nice dent from a fall off my desk onto a barbell that dented my chasis and also nicked the screen protector but no scratches. Best thing is you get 2 so if one gets farked you still have a spare. Best screen protector is one you will use and be happy with.

It still scratches even with the Gorilla Glass. Not big scratches, but they are visible at certain angles - it may or may not bother you.
I've used two types, SGP and Realook. Both are highly regarded, and from my experience SGP doesn't have any rainbow effect like Realook, but Realook has a much more natural feel. Both are excellent.

i took off my screen protector a couple months ago and i sometimes regret it. theres a few scratches on the screen but you cant really see them unless you hold the phone at a specific angle in the light. it doesnt really bother me that much. it is kind of annoying having to clean the fingerprints though.

I have invisishield its great only paid twenty for it with a lifetime warranty you I've had mine for about 4 months and it has yet to get a scratch and I even took a knife and scraped it across the screen surely no scratches but in the end I guess it is all up preference
Sent from my Samsung captivate running 2.3b4

Dont mean to hi jack the thread but is there a way to clean a screen protector? I was installing mine and it slipped out of my hand. I have tried using scotch tape to the debris off of it but I cant get all of it. Any ideas????

Invisishield
I've had the Invisishield on my phone since late August. I just recently had to exchange that under warranty and the Invisishield removed easily and installed easily on the new phone, no air pockets at all. Still looks like the day I bought it.

jfuq20 said:
I have invisishield its great only paid twenty for it with a lifetime warranty you I've had mine for about 4 months and it has yet to get a scratch and I even took a knife and scraped it across the screen surely no scratches but in the end I guess it is all up preference
Sent from my Samsung captivate running 2.3b4
Click to expand...
Click to collapse
possible one of the WORST things to put on a phone's screen. Especially a touch screen phone with one of the best glass and screens.
The invisishield and all others LIKE IT offer nothing but horrible viewing and use. The cover often resists your fingers movements, your fingers often drag on it and the smoothness of glass is all gone and replaced by a crappy rubbery and not to mention GRAINY protector.
Surprisingly, the only thing close to being clear, and smooth is the cheap stuff on ebay. I've used them and they offer great protection and are cheap enough to change out every month. I no longer use one.

for what its worth I got the BodyGuardz protectors when they were on thanks giving sale.
It does not feel like the glass, given, but i almost feel like i like that it gives just a little resistance to my touch. it does have the slightest orange peel effect but you can only see it if its off and at an angle.
Its not perfect, but I like it especially since I have a bit of OCD and it would drive me crazy if i got the smallest scratch on the screen. This gives me piece of mind.

ccdoggy said:
for what its worth I got the BodyGuardz protectors when they were on thanks giving sale.
It does not feel like the glass, given, but i almost feel like i like that it gives just a little resistance to my touch. it does have the slightest orange peel effect but you can only see it if its off and at an angle.
Its not perfect, but I like it especially since I have a bit of OCD and it would drive me crazy if i got the smallest scratch on the screen. This gives me piece of mind.
Click to expand...
Click to collapse
http://cgi.ebay.com/3pcs-Clear-LCD-...218142?pt=PDA_Accessories&hash=item5add8f621e
you're better of with these. They're clear and dont have the resistance you feel with other rubbery protectors. I'd use the ebays ones before anything else, especially if you are OCD.
At $1.57 for 3, you can change it every month if you want, but I've had good luck with them in the past.

I got gadgetshieldz they cost around $6 for full body protection. Worked for me, they are quite nice easy to install and quite good in performance. A word of caution though the it took 20 days for it to get to me in Canada.
Sent from my SAMSUNG-SGH-I897 using XDA App

Nexus 5 Screen Protector Warning

I just thought I should share a valuable lesson: DON'T BUY CHEAP SCREEN PROTECTORS!
I have been fine in the past with cheap screen protectors from eBay. They got the job done, and they were only a dollar or two. And you got six of them.
Anticipating the arrival of my N5, I bought a Spigen Neo-Hybrid case (Which is excellent), and some cheap screen protectors for $2. (12 to be exact)
http://www.ebay.com/itm/231089059032?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I bought a bunch because that gives ample headroom if you mess up a few times.
I try to install the first one, and it ends up with bubbles near the cutouts for the speaker and camera. Okay, I'll just try another one.
I've gone through six of them, and they all have the same bubble problem near the cutouts.
I ended up buying higher-end screen protectors: http://www.amazon.com/gp/product/B00EV97UD6/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I'll be sure to report on those when they arrive.
But the lesson is to be cautious with cheap screen protectors.

The xtremeguard screen protectors are really good, and they can be found for under $2.

mprasolov said:
I just thought I should share a valuable lesson: DON'T BUY CHEAP SCREEN PROTECTORS!
I have been fine in the past with cheap screen protectors from eBay. They got the job done, and they were only a dollar or two. And you got six of them.
Anticipating the arrival of my N5, I bought a Spigen Neo-Hybrid case (Which is excellent), and some cheap screen protectors for $2. (12 to be exact)
http://www.ebay.com/itm/231089059032?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I bought a bunch because that gives ample headroom if you mess up a few times.
I try to install the first one, and it ends up with bubbles near the cutouts for the speaker and camera. Okay, I'll just try another one.
I've gone through six of them, and they all have the same bubble problem near the cutouts.
I ended up buying higher-end screen protectors: http://www.amazon.com/gp/product/B00EV97UD6/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I'll be sure to report on those when they arrive.
But the lesson is to be cautious with cheap screen protectors.
Click to expand...
Click to collapse
I've got some of the iSmooth protectors and they are quite good...once I properly installed them. Dry apply are a little tricky but there are enough tutorials and videos to help. I also have the Neo Hybrid and I'm quite happy with it.

BigOkie said:
I've got some of the iSmooth protectors and they are quite good...once I properly installed them. Dry apply are a little tricky but there are enough tutorials and videos to help. I also have the Neo Hybrid and I'm quite happy with it.
Click to expand...
Click to collapse
I guess I lucked out with my choice of screen protector!

Not necessarily. I bought these SAMAR crystal clear screen protectors, managed to apply one without getting any dust or air bubbles. It has all the cutouts, the fit is good, and it is quite smooth when swiping, very happy with it so far. To top it all off it is dirt cheap and you get 6 protectors all with cleaning cloths! I've read others on here who have been happy with this brand too. Would definitely recommend.

use a drop of water when u install. it'll help take out bubbles.
also you can reapply these, just rinse in soap water then water, then shake off excess and apply. squeegee out the water - should be next to nothing.

ktamondo said:
The xtremeguard screen protectors are really good, and they can be found for under $2.
Click to expand...
Click to collapse
True. And even with that. I got one first and tested before I got backups.

I use an IQshield screen protector and it's nothing short of pure awesome. No bubbles at all, and it's so smooth and dried hard. It feels like glass.

You get what you pay for. I bought the spiegen Crystal for 10 bucks and they went on perfect and looked perfect and felt pretty good to you cant even tell its on unless you look at the earpiece closely. But there's always better! I just recently bought a Nillkin Glass screen protector with 9h hardness and olephobic with rounded edges and its gonna be getting here in a week or so and that should be way better than a cheap or high quality screen protector!

This sounds silly, but whenever I install a cheap screen protector, I do two things: first, i make sure the side that's going to be applied to the screen is FACE DOWN. Never face it up, under any circumstances. if I do, its before removing from packaging. I even remove the adhesive that protects the protector itself, with the screen protector face down. this doesn't give a chance for dust to sit on the bottom of the screen when facing up. Yes im sure any dust flying around will still find a way to stick, but this reduces the chances. Plus, you make sure you are applying in a clean environment anyway. I usually vaccum the house (or area at least) prior to applying, and give the dust time to settle afterwards.
second, and heres the silly part: I make sure the screen is completely wiped, and blow on the screen itself with DRY LIPS as im applying the screen protector face down. This blows off any dust that may settle between the time you apply the screen, and make sure lips are dry as to not blow moisture onto the screen.
There really isn't any fool proof method for applying screen protectors without dust, but without some sort of clean box with a built in HEPA filtration system, this seems to work well for me 80-90% of the time, versus just applying like normal.

unvaluablespace said:
This sounds silly, but whenever I install a cheap screen protector, I do two things: first, i make sure the side that's going to be applied to the screen is FACE DOWN. Never face it up, under any circumstances. if I do, its before removing from packaging. I even remove the adhesive that protects the protector itself, with the screen protector face down. this doesn't give a chance for dust to sit on the bottom of the screen when facing up. Yes im sure any dust flying around will still find a way to stick, but this reduces the chances. Plus, you make sure you are applying in a clean environment anyway. I usually vaccum the house (or area at least) prior to applying, and give the dust time to settle afterwards.
.
Click to expand...
Click to collapse
You can skip all the surgical-precision vacuuming if you do the application in the bathroom. Turn on the shower, hot as it'll go. Leave it run for 5-10 minutes til the bathroom is steamy. That knocks all the dust out of the air.
Then you can apply your screen protector in peace.

Caelrie said:
You can skip all the surgical-precision vacuuming if you do the application in the bathroom. Turn on the shower, hot as it'll go. Leave it run for 5-10 minutes til the bathroom is steamy. That knocks all the dust out of the air.
Then you can apply your screen protector in peace.
Click to expand...
Click to collapse
but wouldn't that cause moisture in the air? I could see that getting in between the screen during application. I bought a ton of screen protectors like OP though, so I'll have to give this idea a shot lol

The moisture will get out over time. Its just like having windows tinted
Sent from my Nexus 5 using Tapatalk

unvaluablespace said:
but wouldn't that cause moisture in the air? I could see that getting in between the screen during application. I bought a ton of screen protectors like OP though, so I'll have to give this idea a shot lol
Click to expand...
Click to collapse
It doesn't matter. Even dry-applied screen protectors go on better this way, and any moisture completely dries out quickly anyway.

Spend a few hundred dollars on a phone and then buy the cheapest cases and screen protectors you can? Doesn't make sense.
I'll pay the extra $8 for a Spigen screen protector and a quality case that match the quality of my Nexus.
Sent from my Nexus 5 using Tapatalk

Spigen could've tried a bit harder and made all the cutouts. Even the temporary screen protector that comes with the phone has those. I think most screen protectors will be similar at the $1+ range but you can't expect much from ones that cost $0.25.

xtremeguards didn't have bubbles for me. Buying 6 of the same screen protectors and then saying all of them have problems doesn't make sense.

I'm assuming the OP means the bubbles are from the edge of the cutouts not sticking down which is a common issue with cheap screen protectors.
the cutouts are not made well so the screen protector itself is warped at the cutouts for the speakers etc so its not flat and does not stick down creating bubbles there.

Just install in steamy bathroom. The steam prevents dust from floating in the air.
Sent from my Nexus 7 using XDA Premium HD app

I got this Nillkin one: http://dx.com/p/277084. I only had one. Applied by using the "hinge" method. Went perfectly. Cutouts are perfect and bubbles are removed very easy (easier than other screen protectors I've had).
I used a little wet cloth to make my screen wet and to remove dust. At first it feels very rubbery, but after using it for a day or even less, it feels just like the glass!

Glass Screen Protector Experiences

I just got my Nexus 5, my first Nexus phone, and I'm pretty excited about it. Naturally I want to add some protection to it especially since I will likely be going sans-case (at least for use, though I've ordered a leather/wool felt sleeve for it to take refuge in while not in the protection of my hands, which will work well with my Pebble as I don't need to constantly check the phone for notifications). A friend of mine that I talked into impulse buying the N5 ordered the Mime Feather Glass protector after his research. Looking through the threads I could find it looks like a lot of people have had issues with chipping edges on that model, and it sounds like a slew of other issues from other manufacturers like Spigen, and I don't like the extra cutouts on the Nillkin protector (just seems like an extra space for dust to collect and takes away from the sleekness a bit IMO). Anyway it looked like most of those posts originated closer to the launch time of the N5 so I'm wondering if any glass protectors have stood out for quality above the rest over the past couple months?
I know the tempered glass protectors are more expensive, but the feel, look, scratch resistance, and apparently debatable shatter protection of the underlying screen seem to be the best option. I saw the post about the Rhino Shield but the much lower scratch resistance and similar price coupled with the article claiming a ziploc bag offered similar protection deterred me slightly :silly:
tl:dr- looking for a sweet tempered glass screen protector to use without a case, what's the best option (overall/value)
Thanks!

TheBeardedAx said:
I just got my Nexus 5, my first Nexus phone, and I'm pretty excited about it. Naturally I want to add some protection to it especially since I will likely be going sans-case (at least for use, though I've ordered a leather/wool felt sleeve for it to take refuge in while not in the protection of my hands, which will work well with my Pebble as I don't need to constantly check the phone for notifications). A friend of mine that I talked into impulse buying the N5 ordered the Mime Feather Glass protector after his research. Looking through the threads I could find it looks like a lot of people have had issues with chipping edges on that model, and it sounds like a slew of other issues from other manufacturers like Spigen, and I don't like the extra cutouts on the Nillkin protector (just seems like an extra space for dust to collect and takes away from the sleekness a bit IMO). Anyway it looked like most of those posts originated closer to the launch time of the N5 so I'm wondering if any glass protectors have stood out for quality above the rest over the past couple months?
I know the tempered glass protectors are more expensive, but the feel, look, scratch resistance, and apparently debatable shatter protection of the underlying screen seem to be the best option. I saw the post about the Rhino Shield but the much lower scratch resistance and similar price coupled with the article claiming a ziploc bag offered similar protection deterred me slightly :silly:
tl:dr- looking for a sweet tempered glass screen protector to use without a case, what's the best option (overall/value)
Thanks!
Click to expand...
Click to collapse
The Mime feather is my first experience with extremely thin glass protectors. My experience at first was great, but it is starting to fall apart and I'm regretting my purchase. It started with the corners for some reason even though I have the heavy duty ballistic case on the phone. Now I'm getting whole cracks from one side to the other... Not even originating from the corners where it started. I am clueless as to how it happens because I have never dropped my phone.
If you're going to get a glass protector I strongly encourage you to get the non-thin versions. It's not a whole lot thicker and it is less likely to be brittle. I have used several normal thickness glass protectors in the past (Spigen) and was never disappointed in those. So far my experience with MIME is poor, but Spigen has been excellent and that includes their cases.

Thanks. I was tempted buy Iloome's flex glass cause it's on sale right now for $17 but I was thinking the thicker protector might be the way to go.

TheBeardedAx said:
I just got my Nexus 5, my first Nexus phone, and I'm pretty excited about it. Naturally I want to add some protection to it especially since I will likely be going sans-case (at least for use, though I've ordered a leather/wool felt sleeve for it to take refuge in while not in the protection of my hands, which will work well with my Pebble as I don't need to constantly check the phone for notifications). A friend of mine that I talked into impulse buying the N5 ordered the Mime Feather Glass protector after his research. Looking through the threads I could find it looks like a lot of people have had issues with chipping edges on that model, and it sounds like a slew of other issues from other manufacturers like Spigen, and I don't like the extra cutouts on the Nillkin protector (just seems like an extra space for dust to collect and takes away from the sleekness a bit IMO). Anyway it looked like most of those posts originated closer to the launch time of the N5 so I'm wondering if any glass protectors have stood out for quality above the rest over the past couple months?
I know the tempered glass protectors are more expensive, but the feel, look, scratch resistance, and apparently debatable shatter protection of the underlying screen seem to be the best option. I saw the post about the Rhino Shield but the much lower scratch resistance and similar price coupled with the article claiming a ziploc bag offered similar protection deterred me slightly :silly:
tl:dr- looking for a sweet tempered glass screen protector to use without a case, what's the best option (overall/value)
Thanks!
Click to expand...
Click to collapse
I am using MIME Ghost glass protector. It is excellent. I am using my N5 without a case.

psy_spy said:
I am using MIME Ghost glass protector. It is excellent. I am using my N5 without a case.
Click to expand...
Click to collapse
How long have you been using the Ghost? Any issues with peeling/chipping/bubbles?

I enjoy the spigen glastr nano slim. I haven't had any issues since i put it on week ago. I wrote a thread about it.
Sent from my Nexus 5 using Tapatalk

TheBeardedAx said:
How long have you been using the Ghost? Any issues with peeling/chipping/bubbles?
Click to expand...
Click to collapse
I have been using it for 2 weeks. No peeling/chipping issues since it is a bit thicker compared to feather. When I applied it on the phone, I got a very small bubble near the upper left corner. It disappeared after a day. Please read reviews from other mime ghost owners to get a fair idea. I remember seeing a separate thread for mime in the n5 forum.

I've got the spigen glass nano.tr slim (the one with rounded corners) coming the mail. Any tips on applying it? I REALLY get OCD (ADHD) if there's ANY dust or bubbles under the screen, so I have to do it perfectly, since it costs nearly £30.
Any advice on how to do it flawlessly?
I read somewhere about running the shower on hot for 30 mins, then doing it in the bathroom, because the hot air causes the dust to all fall to the ground and isn't flying around - but won't that cause condensation etc to build up on the screen in the seconds before you apply the protector?
Any tips would be greatly appreciated.

paradoxiumwind said:
I've got the spigen glass nano.tr slim (the one with rounded corners) coming the mail. Any tips on applying it? I REALLY get OCD (ADHD) if there's ANY dust or bubbles under the screen, so I have to do it perfectly, since it costs nearly £30.
Any advice on how to do it flawlessly?
I read somewhere about running the shower on hot for 30 mins, then doing it in the bathroom, because the hot air causes the dust to all fall to the ground and isn't flying around - but won't that cause condensation etc to build up on the screen in the seconds before you apply the protector?
Any tips would be greatly appreciated.
Click to expand...
Click to collapse
See my thread. Use the hinge method. I didn't do it in a steamy room, but it went on near flawless. (No dust, but only very slightly off center)
Sent from my Nexus 5 using Tapatalk

I got the xgear glass for nexus 4 and it was great. It save me phone, I drop it on is screen and nothing happens only the tempered glass was broken.
Sent from my Nexus 5 using XDA Premium 4 mobile app

KTT16 said:
See my thread. Use the hinge method. I didn't do it in a steamy room, but it went on near flawless. (No dust, but only very slightly off center)
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Regarding the hinge method, make sure when you close the hinge it falls smack dab center. No having to pull it to slightly center it, etc. The tape itself has some bit of tension so it will pull the screen protector back. I'm like 0.2mm off center and I'm very annoyed. So maybe when you tape the screen protector down, start slightly to the left (assuming you tape the right).
Also if you have access to a clean room, do it there. I regret doing it at home and not staying late at work to use the CDA and cleanroom to properly dust off my screen. A stupid eyelash fell off in the middle of the procedure and I have a freaking eyelash underneath my screen protector. LOL. Good thing it's at the bezel though.

The most effective method imo is the steamed washroom method which gives you lots of chances to get it right and you'll never get any dust or any other particles on your screen.

The cruzerlite glass screen protector is amazing. I need to write up a review on it now and take some pics as I've had it over a week. It honestly feels better than the real n5 screen.
>^.^< Sent From Meow nexus 5

I have the Mime Feather Glass and it works great. I did have to shave the corners of my Ringke case to prevent the screen protector from peeling up on the edges. See post #30 here: http://forum.xda-developers.com/showthread.php?t=2540471
On a side note., the screen protector did crack, from something I did, and Mime sent me a coupon for 50% off a new one.
Sent from my Nexus 5 using Tapatalk

I have a Nillkin protector, looks and feels great. Just wondering how a tempered glass protector fares against drops compared to those shatter proof polyurethane (non glass) screen protectors like Rhino Shield and Zagg Extreme. I know Tempered glass protectors can shatter but those others won't, I’m not worried about that, I’m more concerned about the level of protection they offer. Are glass protectors as good as those other ones at dispersing and dampening impact forces? I've seen a couple of videos on Rhino Shield and they look amazing.

I received the first gen of Spigen's SLIM.t screen protectors in mid-November and have been using it since. Initially, the product was great albeit it still attracted fingerprints. I was highly satisfied and the tempered glass looked and felt amazing (plus I managed to avoid any of the bubbles the majority of early buyers experienced).
But a month after normal use (I don't use a case either, but I'm very careful with my phone) it started chipping on the edges. I never dropped my phone or do anything that would cause damage, but magically out of no where the screen protector started chipping.
Currently today, I have 6 chips around my screen protector (2 at the top, 1 on the right, 3 on the left), and two clear cracks across my phone as well (both stemming from separate chips on the side). I'm not sure how the SPIM.tR Nano performs, but I can tell you that paying over $30 for a screen protector that chips this easily is not a worthwhile investment. Something to be aware of.

Zagg HD shield has no problems
Sent from my Nexus 5 using Tapatalk

KTT16 said:
I enjoy the spigen glastr nano slim. I haven't had any issues since i put it on week ago. I wrote a thread about it.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
This. Best screen protector I've ever had, a little pricey but I'm glad I bought it.
Sent from my Nexus 5 using Tapatalk

When do you buy a new glass protector?

I scratched my icarez glass protector this afternoon, I knew it was a bad ides to just throw my phone in my bag but that's why I got a protector. Now I have about a 1 inch scratch down the middle and it annoys me almost as much as if my actual screen was scratched.
Am I crazy for wanting to buy a new one now? 10$ isn't crazy but I should probably try and pace myself.

randyspants said:
I scratched my icarez glass protector this afternoon, I knew it was a bad ides to just throw my phone in my bag but that's why I got a protector. Now I have about a 1 inch scratch down the middle and it annoys me almost as much as if my actual screen was scratched.
Am I crazy for wanting to buy a new one now? 10$ isn't crazy but I should probably try and pace myself.
Click to expand...
Click to collapse
I wonder what was in the bag. As all protector companies use terms like 9H hardness usually everything except sand will make such a scratch. So either they are all lying (which of course they are) or something special was in the bag (which I doubt).
Marketing BS sucks

Haha ya nothing special, some plastic headphones and some paperwork. Maybe it was a staple from that or just the zipper on the way in/out. Either way not mad one bit just amused at myself for wanting to replace the protector for doing its job and taking a scratch

I would replace it. Depending on how deep the scratch is it still turn into a crack which isn't fun.

Same i got the Nillkin 9H one, i got a small scratch on it...
Sent from from my LG-D855

My Spigen randomly cracked on my D850, I don't think there was a scratch. Also don't forget its still glass and it will eventually break depending on how deep of a scratch it is.

The only thing I could get to scratch the protector was a serrated kitchen knife. A screwdriver, scissors, keys, etc. couldn't do it.

My Nillkin one scratched in under a week.
I was on a morning flight one day and had the phone resting on my belly/lap whilst taking a nap, when I woke up I found it scratched an inch down the centre, I think it may be from the seat belt buckle.
I ordered a bepak one as that had moulded holes around speaker grille and sensor rather than a big cutout, during the time the bepak arrived a crack formed across the top separate from the original scratch.
Never again Nillkin.

MrDerrickC said:
My Nillkin one scratched in under a week.
I was on a morning flight one day and had the phone resting on my belly/lap whilst taking a nap, when I woke up I found it scratched an inch down the centre, I think it may be from the seat belt buckle.
I ordered a bepak one as that had moulded holes around speaker grille and sensor rather than a big cutout, during the time the bepak arrived a crack formed across the top separate from the original scratch.
Never again Nillkin.
Click to expand...
Click to collapse
I've ordered a Bepak one today as well... read good reviews about it till now. Lets see how it holds out. I have a tendency to keep my phone in my bag while gymming & stuff so hopefully it holds a little longer that the normal ones do.
On the main topic though, just be glad you had a screen protector on atleast! That scratch directly on the screen and it would've costed far more than 10$! Then again, you're not crazy about wanting to replace it right away.. the G3 is a piece of beauty and a scratch makes it really annoying everytime you see it.

if4ct0r said:
I've ordered a Bepak one today as well... read good reviews about it till now. Lets see how it holds out. I have a tendency to keep my phone in my bag while gymming & stuff so hopefully it holds a little longer that the normal ones do.
On the main topic though, just be glad you had a screen protector on atleast! That scratch directly on the screen and it would've costed far more than 10$! Then again, you're not crazy about wanting to replace it right away.. the G3 is a piece of beauty and a scratch makes it really annoying everytime you see it.
Click to expand...
Click to collapse
In my opinion, the nillkin is probably softer then the screen itself. It scratched up too easily.
The bepak feels "harder"
Sent from my LG-D855 using Tapatalk

MrDerrickC said:
In my opinion, the nillkin is probably softer then the screen itself. It scratched up too easily.
The bepak feels "harder"
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
Strange isn't it. Both mention 9H hardness. Yet one feels softer and scratches easily. I guess you cant't really trust what these guys mention on their product description.

I wouldn't worry about it as long as actual screen us not damaged. I would wait until the protector screen actually damaged or cracked.

I had my nexus 4 for over a year without a screen protector and still don't see a scratch on it.
This lg has the same glass I believe. Gorilla glass 3 I think. I don't think a screen protector is needed though maybe it would help with keeping the glass from shattering. I'm not sure though. I would get one if that is the case.
Sent from my LG-D851 using XDA Free mobile app

I might take some hate for saying this, but I've always been an advocate of the plastic screen protectors. I've tried the glass, and encountered the same problems that you states, OP. I find that the plastic ones work better for me.
There was a ton of marketing and advertising for the glass stuff, but I think that it was a little over the top. The plastic is better in my opinion.

dianestory2 said:
The plastic is better in my opinion.
Click to expand...
Click to collapse
How is that?
It's considerably more difficult to put on without getting bubbles.
It's considerably less panel-breaking protective.
It's considerably less scratch resistant.
It's considerably less smooth.
These, by the way, are not personal judgments but facts

Plastic screen protectors attract a crap load more finger prints and are harder to clean off compared to glass.

Cailifu brand on Amazon claims to carry a 1 year warranty. Came with the exact same inserts and application tools as the icarez
Sent from my LGLS990 using XDA Free mobile app

Does the screen protector just protect from scratches or would it also help with a drop?
Sent from my LG-D851 using XDA Free mobile app

I am using a glass protector for now 1.5 month and not a single scratch yet! It's however significantly thicker than plastic one! Sometimes I feel the touch less responsive.. It also catches fingerprint and dirt like a magnet lol (probably no oleophobic coating) I found the G3 screen itself very very good! your finger just slips fluently across the screen and barely catches any fingerprint! I installed one just for extra protector I'd say worth it if you don't mind cleaning your screen more frequently

Pfeffernuss said:
How is that?
It's considerably more difficult to put on without getting bubbles.
It's considerably less panel-breaking protective.
It's considerably less scratch resistant.
It's considerably less smooth.
These, by the way, are not personal judgments but facts
Click to expand...
Click to collapse
1) not if done the right way
2) agreed
3) I've never ever ever had a scratch on my phone, plastic or glass
4) only a little.
For my personal lifestyle, I don't really care that much about all of that. I'm glad you are so supportive, though

Found a great film protector

Not many post on XDA but I promise you I do not work for this company lol. I've been searching forever for a good screen protector and glass is off the table. Whitestone is too expensive and I know I'd mess it up! I've gone through several brands of films on Amazon that have good/moderate reviews but they have all had poor coverage or just didn't stick down on the edges, and I consider myself a pro at installing films. Found a new one that claimed it used new technology to create a tpu type film and took a gamble on it as there where no reviews/ratings. I am pleased to announce that with proper care putting it on its flawless, adheres 100% to the sides and is almost unnoticeable by touch or look. (Except for that it's film and not glass) I will note however that be careful installing as the adhesive is very strong, and getting dust out after installing is near if not impossible. I'll post pics tomorrow of the product and a pic of my phone with it installed!
amazon.com/gp/aw/d/B071NY2RXP/ref=yo_ii_img?ie=UTF8&psc=1
... Can't post links yet. It's the JOLOJO film for the Galaxy S8/+ on Amazon. Make sure you get the film not glass protector.

First time post...you are this isn't you selling it?
Sent from my SM-G955U1 using XDA-Developers Legacy app

SEVENEDGE said:
First time post...you are this isn't you selling it?
Click to expand...
Click to collapse
Honestly I just got tired of looking for screen protectors. I made this account on XDA forever ago and decided that since I'd finally found one I'd just like to share my experience to maybe save some others frustration. I always lurk around here, have since the Moto a855 days, just never get on and post.
If someone does decide to try one of these protectors and chimes in that'd be great as I know my low post count doesn't make me look very believable lol

ha. yeah, I suspected some time ago, that an employee or more were making accounts promoting their asian battery, with low post counts.
Sent from my SM-G935V using XDA-Developers Legacy app

Don't know about this one, but I just received a similar TPU-type screen protector. Haven't installed it yet, will reply back after I have.
This is the one I bought: https://www.amazon.com/gp/product/B07121XQWT/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

ChuckL123 said:
Not many post on XDA but I promise you I do not work for this company lol.
[Snip]
amazon.com/gp/aw/d/B071NY2RXP/ref=yo_ii_img?ie=UTF8&psc=1
... Can't post links yet. It's the JOLOJO film for the Galaxy S8/+ on Amazon. Make sure you get the film not glass protector.
Click to expand...
Click to collapse
monkey39 said:
Don't know about this one, but I just received a similar TPU-type screen protector. Haven't installed it yet, will reply back after I have.
This is the one I bought: https://www.amazon.com/gp/product/B07121XQWT/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I would be curious to know how these work with a case.

Mr. Orange 645 said:
I would be curious to know how these work with a case.
Click to expand...
Click to collapse
Well, can't tell you that as I screwed up the install and had to trash it [emoji17]. Couldn't get the bubbles out of it. Very likely my ineptness - been a while since I used anything besides tempered glass.
Sent from my SM-G955U1 using Tapatalk

monkey39 said:
Well, can't tell you that as I screwed up the install and had to trash it [emoji17]. Couldn't get the bubbles out of it. Very likely my ineptness - been a while since I used anything besides tempered glass.
Sent from my SM-G955U1 using Tapatalk
Click to expand...
Click to collapse
Dammit, man!! Now I'll never know!

Mr. Orange 645 said:
Dammit, man!! Now I'll never know!
Click to expand...
Click to collapse
Sorry man, had high hopes for it based on the case problems with tempered glass I've been reading about. Anyway, just ordered a tempered glass one [emoji9] that purports to be "case friendly". We'll see.
Sent from my SM-G955U1 using Tapatalk

I got mine on without bubbles, but I learned very quickly the adhesive is extremely strong on these screen protectors and getting tiny bubbles out is very hard. You have to choose a large one and push it around through all the smaller ones. As far case usage goes, they fit snug and the only case I own is a OtterBox Symmetry which I have no problems with.
In the description and picture it states these have a 9H rating, and while I've had mine on since Friday without any scratches I have to call BS on that claim. They are a tpu film, feel like film, definitely don't feel like glass but are 100% crystal clear. They seems fairly durable compared to some other PET films I've used, and they are much thicker/heavy duty. (Can't tell once applied however)

Orange peel? Or completely flat like PET

tofu- said:
Orange peel? Or completely flat like PET
Click to expand...
Click to collapse
No orange peel at all. 100% smooth like PET. I can't stand wet apply protectors because of the orange peel/clarity so I've never used them. Always stuck to cheap PET and this is very similar.
Like I said though, I can't stress enough to be careful putting it on as it has a very strong adhesive. It is still easy to take off and leaves no residue, but getting dust/dirt/hair out after is impossible. It's not like normal PET that uses static.
I did get a short piece of hair on mine when installing, which I'd normally remove or put on a new film after, but with the adhesive and TPU this seems to have just molded around it and it's almost not noticable. Leaves no air as the protector won't push back up. I'm very OCD with my protectors.
EDIT: Also, another note is that where this is a hard TPU film I have noticed it resist scratches very well but will indent like the wet apply protectors when force is applied such as with a finger nail. It does seem to recover after awhile. Funny how it's a TPU that feels like film. Also, 4 days now and no signs of peeling/no scratches. My phone is in and out of my pants pocket all day long.

ChuckL123 said:
No orange peel at all. 100% smooth like PET. I can't stand wet apply protectors because of the orange peel/clarity so I've never used them. Always stuck to cheap PET and this is very similar.
Like I said though, I can't stress enough to be careful putting it on as it has a very strong adhesive. It is still easy to take off and leaves no residue, but getting dust/dirt/hair out after is impossible. It's not like normal PET that uses static.
I did get a short piece of hair on mine when installing, which I'd normally remove or put on a new film after, but with the adhesive and TPU this seems to have just molded around it and it's almost not noticable. Leaves no air as the protector won't push back up. I'm very OCD with my protectors.
EDIT: Also, another note is that where this is a hard TPU film I have noticed it resist scratches very well but will indent like the wet apply protectors when force is applied such as with a finger nail. It does seem to recover after awhile. Funny how it's a TPU that feels like film. Also, 4 days now and no signs of peeling/no scratches. My phone is in and out of my pants pocket all day long.
Click to expand...
Click to collapse
Use a piece of scotch tape to remove any dust the gets behind it. Just peel up your screen protector then use the tape (sticky side to screen protector sticky side) to pull any dust or hair off the inside.

ShrekOpher said:
Use a piece of scotch tape to remove any dust the gets behind it. Just peel up your screen protector then use the tape (sticky side to screen protector sticky side) to pull any dust or hair off the inside.
Click to expand...
Click to collapse
I tried that. Tape stuck to the adhesive on the film and when pulling off left a mark where the tape was on it. Like I said, the screen protector has a strong adhesive and doesn't use static. Usually only static pet protectors can have dust removed with tape. In this case, the adhesive on the film is stronger than tape.

How's it holding up a week later?

great screen protector
thanks OP for recommending this
I installed mine a bit over a week ago and have to say fairly impressed with it. It is stronger than your normal PET protectors (doesn't get micro scratches easily) and has very strong adhesive as the OP mentioned (great for the edges).
I did buy the case friendly version though instead of the full screen one
https://www.amazon.com/JOLOJO-Protector-Anti-Bubble-Strengthened-Application/dp/B071NZKKT1/ref=sr_1_2?ie=UTF8&qid=1501007553&sr=8-2&keywords=jolojo
As far as install is concerned - If you have a rubber squeegee (had one from the armorsuite products) it will help greatly. Combine that with the hinge method and you will get a really good install.
Cons
You have to be pretty damn exact for the borders. There is really no room for error.
Not glass but I am definitely happy with it.

I bought a wet install film screen protector and I am loving it... No touch sensitivity issues, easy to install, and self heals scratches... I have used it on on a few past phones as well as smartwatches and have never had any issues with them.
https://www.amazon.com/ArmorSuit-Pr...ung+galaxy+s8+plus+armorsuit+screen+protector

It’s Supershieldz for me.

Got these today. Chuck is right, they are somewhat a pain to install but the result is great. Recommend.

Does the material of the Jolojo feel rubbery like other films do or is it smoother with less friction?
Sent from my SM-G955U using Tapatalk