[Q] ROM not working after downgrade to 2.3.3 - Verizon Droid Incredible 2

First off, I was going to ask for help in this thread, but I don't have those privileges, yet. But if attn1 is reading this... THANKS FOR ALL YOUR WORK!!
http://forum.xda-developers.com/showthread.php?t=1298990
I'll write out my problems in a list so it's easier to follow.
1. I downgraded my phone with the following the above link. S-OFF, etc.
2. I've tried to install MIUI 1.10 and 1.9 through REVOLUTION, and it says that it has successfully installed.
3. When I try to reboot after the install, it gets bootlooped.
4. I've tried going back to the backup I set up after successful rooting. I've also reinstalled the ROMs many times, each time it just bootloops.
So the question is:
Has anyone had trouble using MIUI after downgrading as well? Have people had success with different ROMs?

I could be mistaken because I haven't used the down grader, but I think that all revolution does is give you s-off and install cloclwork.
I think you have to install miui from clockwork.
Boot into recovery. With phone off, hold down the vol- key and the power button.
Before you install miui, make sure to wipe the data, cache and dalvik.
You have to have miui on your SD card and select it when you use the Install zip from SD card option.
If I've miss understood your post, disregard this one.

T.M.M.L said:
I could be mistaken because I haven't used the down grader, but I think that all revolution does is give you s-off and install cloclwork.
I think you have to install miui from clockwork.
Boot into recovery. With phone off, hold down the vol- key and the power button.
Before you install miui, make sure to wipe the data, cache and dalvik.
You have to have miui on your SD card and select it when you use the Install zip from SD card option.
If I've miss understood your post, disregard this one.
Click to expand...
Click to collapse
I did all of this, except for wipting data, cache, and dalvik. Can anyone else confirm that I should do this?
After I install MIUI and reboot is when I start bootlooping.

You should always when flashing a new ROM.
Sent from my DINC2HD

Oh also...
I cannot install MIUI from clockwork.... since I do not have super user.
From what I understand, I get superuser after i successfully install a ROM from my SD card. After I get 1 ROM, I can start installing through clockwork since superuser will then grant me the access to do so.
EDIT: WOW! I cleared cache and data and reinstalled MIUI and now it works! Thank you both for the great help! Let me know if I can repay you guys by upping your "thanks" meter. I'm still a bit new to the forums :\

sLiniss said:
Oh also...
I cannot install MIUI from clockwork.... since I do not have super user.
From what I understand, I get superuser after i successfully install a ROM from my SD card. After I get 1 ROM, I can start installing through clockwork since superuser will then grant me the access to do so.
EDIT: WOW! I cleared cache and data and reinstalled MIUI and now it works! Thank you both for the great help! Let me know if I can repay you guys by upping your "thanks" meter. I'm still a bit new to the forums :\
Click to expand...
Click to collapse
superuser isnt need for clockwork RECOVERY. if you mean the rom manager, yea u need superuser, but u can isntall the recovery if u have s-off....
and if u have s-off and clockworkmod recovery, u can isntall any rom u want for this phone.. just make sure to wipe before hand...

Related

rooted....now lost! Please help

I did the root and I have the WiMAX setting and Wifi Tethering is working somewhat but I cant figure out how to flash my rom..I dl'd DamageControl 3.2 but i dont know what to really do now...When i try use ROM Manager I get the error..."an error occurred while attempting to run priviledge commands!" I'm just lost as to what i do now to start using a different rom
Bump.....ANYONE?!
So the following questions would need to be answered:
1) What version of stock were you running before you rooted? (i.e. 1.47, 1.32)
2) What root method did you use?
3) What recovery do you have?
4) If you have wireless tether working than you would need to have installed a custom kernel, which one did you install?
I'm sorry that no one else has tried to assist you in this, however, next time please post this in Q&A as this is for development purposes.
~Jasecloud4
nova0387 said:
I did the root and I have the WiMAX setting and Wifi Tethering is working somewhat but I cant figure out how to flash my rom..I dl'd DamageControl 3.2 but i dont know what to really do now...When i try use ROM Manager I get the error..."an error occurred while attempting to run priviledge commands!" I'm just lost as to what i do now to start using a different rom
Click to expand...
Click to collapse
my personal experience sometimes if your using the rom mangager to flash roms it doesnt always wipe it fully so i use amon recovery all the time now
Im honestly not sure which version i was running b4 I just my Evo about 4 days ago...I used the SimpleRoot 1.47 to root my phone...all went fine for rooting...I didnt install any custom kernal...I pretty new at this so bare with me a bit if you could
and thnx for your time for even replying man!
nova0387 said:
Im honestly not sure which version i was running b4 I just my Evo about 4 days ago...I used the SimpleRoot 1.47 to root my phone...all went fine for rooting...I didnt install any custom kernal...I pretty new at this so bare with me a bit if you could
and thnx for your time for even replying man!
Click to expand...
Click to collapse
i honestly dont know anything about that simple root i have heard that it does work though i rooted in the beginning with toast's method. anyway what happens when you try and get to recovery mode IE powering the the phone off, then holding the volume down button while powering the phone on?
danon.brown said:
i honestly dont know anything about that simple root i have heard that it does work though i rooted in the beginning with toast's method. anyway what happens when you try and get to recovery mode IE powering the the phone off, then holding the volume down button while powering the phone on?
Click to expand...
Click to collapse
Well when i try to go into recover mode it first gives me a black screen that shows a cell phone and a triangle with a exclamation point then i hold the volume up keyand press power and it says "e can't open cache recovery command" n then takes me to a screen where it says
Android system recovery <2e>
use d-pad to highlight; center to select.
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
nova0387 said:
I did the root and I have the WiMAX setting and Wifi Tethering is working somewhat but I cant figure out how to flash my rom..I dl'd DamageControl 3.2 but i dont know what to really do now...When i try use ROM Manager I get the error..."an error occurred while attempting to run priviledge commands!" I'm just lost as to what i do now to start using a different rom
Click to expand...
Click to collapse
Okay during the process of rooting my device, ebo 4g, v1.3x
I ran into the same problem, you have to or I'm sure on this forum just do some research,.....
In RA, dalvik wipe, cache wipe and phone wipe. Then I flashed the rom via sd card, using clockwork custom recovery. If you used Simple root 3 click process you should have clock work.Via step 2.
Rename the Rom to update.zip and place in root sdcard.
Adb reboot recovery
Update.zip from SD card
Finnish do full system wipe and dalvik cache.
Make sure you are nand protected before flashing.
Via step 3
I don't know if this mighhelp just some recent stuff I ran into. Rooted my g1 a WHILE back. Hope these noobietips help lol
Sent from my PC36100 using XDA App
Do this! It's the fastest and easiest way.
Once you get 1.47 and singed sigs then do DC ROM again.
http://forum.xda-developers.com/showthread.php?t=715915
elitekernel said:
Okay during the process of rooting my device, ebo 4g, v1.3x
I ran into the same problem, you have to or I'm sure on this forum just do some research,.....
In RA, dalvik wipe, cache wipe and phone wipe. Then I flashed the rom via sd card, using clockwork custom recovery. If you used Simple root 3 click process you should have clock work.Via step 2.
Rename the Rom to update.zip and place in root sdcard.
Adb reboot recovery
Update.zip from SD card
Finnish do full system wipe and dalvik cache.
Make sure you are nand protected before flashing.
Via step 3
I don't know if this mighhelp just some recent stuff I ran into. Rooted my g1 a WHILE back. Hope these noobietips help lol
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Ok when i go to SimpleRoot and i click extras it says flash recovery...then i can select from Clockwork or RA...I've tried both and they just say flashed successful but nothing different happens...I'm not really sure what ADB reboot recovery is?
stewie-droid said:
Do this! It's the fastest and easiest way.
Once you get 1.47 and singed sigs then do DC ROM again.
http://forum.xda-developers.com/showthread.php?t=715915
Click to expand...
Click to collapse
I ttried that and it works fine until i get to the part about the su file...it doesnt let me go into recovery mode it shows me the black screen with a cell phone and a triangle with an exclamtion point
nova0387 said:
Ok when i go to SimpleRoot and i click extras it says flash recovery...then i can select from Clockwork or RA...I've tried both and they just say flashed successful but nothing different happens...I'm not really sure what ADB reboot recovery is?
Click to expand...
Click to collapse
adb reboot recovery just reboots your phone into recovery mode. once your in that do all the wipes i think its 3 dlvk, data and something else. power off the phone once more then boot to recovery again. now one of the options is flash from zip go there and you should find whatever rom your trying to flash. also you should be putting your zipped rom files in the root directory of your sdcard. on a side not if your on a mac dont download them with safari use firefox or something else
nova0387 said:
Ok when i go to SimpleRoot and i click extras it says flash recovery...then i can select from Clockwork or RA...I've tried both and they just say flashed successful but nothing different happens...I'm not really sure what ADB reboot recovery is?
Click to expand...
Click to collapse
also clockwork and ra are 2 different types of recovery you wont notice anything until u actually reboot the phone into recovery mode
Ok i clicked flash rom on the simple root again and this time it brought up a black and green screen and more options...I selected apply zip from sd card and went down and selected the Damagecontrol zip...it said it installed successfully but now when i go to reboot my phone it keeps reloading the sprint 4g screen and wont boot all the way up!?
nova0387 said:
Ok i clicked flash rom on the simple root again and this time it brought up a black and green screen and more options...I selected apply zip from sd card and went down and selected the Damagecontrol zip...it said it installed successfully but now when i go to reboot my phone it keeps reloading the sprint 4g screen and wont boot all the way up!?
Click to expand...
Click to collapse
you forgot to wipe something common problem.. reboot to recovery again.. go to the wipes part and do all of them.. reboot one last time to recovery then flash DC it should work then
wipe the first 3 if your on RA 1.7.0.1 data/factory, cache, and dalvik.. then reboot into recovery again and flash
nova0387 said:
Ok i clicked flash rom on the simple root again and this time it brought up a black and green screen and more options...I selected apply zip from sd card and went down and selected the Damagecontrol zip...it said it installed successfully but now when i go to reboot my phone it keeps reloading the sprint 4g screen and wont boot all the way up!?
Click to expand...
Click to collapse
nova,
I had the same boot loop issue. My thread for it here:
http://forum.xda-developers.com/showthread.php?t=728955
The issue was that I wasn't totally 100% rooted. By carefully following these directions, I was able to resolve my issue:
http://forum.xda-developers.com/showthread.php?t=721055
I hope this helps also, I did it using the "PC" method. If you have questions regarding those instructions I'd be happy to share my personal experience.
Ok Ok Ok!!! I think I jsut got it my dood! How do i know tho? It booted up and everything just fine and i have wayy more apps including like Dconfig ad superuser permission...is that kinda how i kno?
nova0387 said:
Ok Ok Ok!!! I think I jsut got it my dood! How do i know tho? It booted up and everything just fine and i have wayy more apps including like Dconfig ad superuser permission...is that kinda how i kno?
Click to expand...
Click to collapse
Errr... maybe? Superuser permission, etc. certainly doesn't come with stock. It depends on the ROM you installed. Here's one way to find out...
Go to Settings -> About Phone -> Software Information and check the "Build Number". AFAIK it's impossible to install DamageControl without full root (I tried to myself before fixing my root and going to Fresh 1.0.1) so if that's what you have I'd say you're good.
There may be a better way but that's all I know.
aikeru said:
Errr... maybe? Superuser permission, etc. certainly doesn't come with stock. It depends on the ROM you installed. Here's one way to find out...
Go to Settings -> About Phone -> Software Information and check the "Build Number". AFAIK it's impossible to install DamageControl without full root (I tried to myself before fixing my root and going to Fresh 1.0.1) so if that's what you have I'd say you're good.
There may be a better way but that's all I know.
Click to expand...
Click to collapse
Yep my Build Number says DamageControl v3.2.3! Thnx again everyone who tried to help me and def a special thnx to Danon.Brown! Hollllllla

[Q] help flashing new rom!! CM7?

I got a tmobile g2 off craigslist today and its already rooted with s-off. i want to flash cyanogenmod 7 have no idea how to go about it because my phone is already has a htc sence rom. can anyone help me out plz??? im asking questions cuz i dont wanna brick my phone like an idiot.
does the phone have clockwork revocery? if not download rom manager from the market and click flash recovery. if you have a rom installed you most likely have the recovery. still flash recovery to get the latest version which is required by cyanogenmod. download the rom you want with the gapps and put it on your sd card. boot into recovery and pick " wipe data/factory reset' after that choose "wipe cache partition". then "install zip from sd card" followed by "choose zip from sd card". then look around for the cyanogenmod and click on it. after it's flashed go to the gapps the same way you found the rom and flash them. reboot and you'll have your new rom.
any questions don't bother to ask.
ok thanks ill try it
anything you don't understand ask cuz we don't want anything to go wrong.
ok so i flashed a new rom and all went well. now when i try connecting to wifi (no dataplan) i cant for some reason. wifi starts but doesnt find my router. i try scanning and wifi turns off. i think its the new rom.. wifi worked fine before. what should i do??????? maybe find another rom??
btw i flashed android 2.3.1 gingervillain 1.4
Please just go read read read the guides and stickies. You'll be glad you did later when you dont have to keep asking questions to simple answers. And you'll be able to troubleshoot for yourself.
Things to think about:
1) Use ROM manager to make backups before you change anything significant
2) When switching roms, do a full data/cache/dalvik cache wipe before flashing
3) Don't do anything that you're not sure on. Research before you brick your phone.
Afterlife1991 said:
ok so i flashed a new rom and all went well. now when i try connecting to wifi (no dataplan) i cant for some reason. wifi starts but doesnt find my router. i try scanning and wifi turns off. i think its the new rom.. wifi worked fine before. what should i do??????? maybe find another rom??
btw i flashed android 2.3.1 gingervillain 1.4
Click to expand...
Click to collapse
Do a reboot (Usually these 2.3 builds require a reboot to fix WiFi). Did you wipe data and cache before flashing? You can also try a fix permissions.
i made a backup so its ok. and yea i did a data cache wipe.. ill try a reboot thx guys
martonikaj said:
Do a reboot (Usually these 2.3 builds require a reboot to fix WiFi). Did you wipe data and cache before flashing? You can also try a fix permissions.
Click to expand...
Click to collapse
thanks alot marton.. reboot fixed it. feel like a total newb lol. should have tried that earlier
Afterlife1991 said:
thanks alot marton.. reboot fixed it. feel like a total newb lol. should have tried that earlier
Click to expand...
Click to collapse
No worries. Glad I could help.

[Q] How to wipe via ClockworkMod Recovery?

Ahoy! I apologize in advance if this question has been asked and answered before (I'm sure it has - but I couldn't find exactly what I'm looking for via search.)
I currently have the Android Revolution HD v2.0.13 ROM installed.
I'm now looking to install Version 3.0. A 'full wipe' is suggested when flashing 3.0. I remember doing this via ClockworkMod recovery when I changed from my Stock ROM to ARHD, but I've forgotten exactly how to do it.
I see there are a lot of wipe/format options in ClockworkMod Recovery, but I just don't know exactly which one to use.
Any help would be much appreciated!
Bonus Question!: I've only had my phone for three weeks or so. The SD card has gotten /extremely/ messy due to faults of my own, mainly just lazyness. I'd like to just wipe the SD card of all data and start again fresh and clean. Is this possible? If so, how do I do it and will it mess up my ROM or anything? I'm OK with losing ALL my data and just having a freshly-installed ROM and nothing else.
Just go into clockword mod and choose install rom off sd or second option is to power off device and then hold down volume down key and power on...this will enable recovery console and there you can do a full wipe and then flash new rom ....make sure new rom is already on sd card.
As for sd card im not entirely sure but think you should be ok if you really wanted to wipe it....but probably be better off just trying to tidy it up .....up to you though
hope this helped
Yeah, I know how to get into Clockworkmod Recovery and all, but to actually perform a 'full wipe', I don't know what option to choose specifically.
Thanks though!
......wipe data/factory reset is the one to choose.
Hi,
You can either format your SD via ROM-Manager or CWM there's definitely an option for doing that but I can't remember where exactly!
Rgds
menov321 said:
......wipe data/factory reset is the one to choose.
Click to expand...
Click to collapse
Also wipe /cache and /dalvik-cache, these are actually the most important as this is where files reside that may cause you problems as it's not overwritten by flashing a new ROM.
As for clearing out the SD card, go ahead and format it if you want, the ROM will install all required folders on boot up so don't worry about losing anything important
safestrap is uninstalled
guys , i have motorola razr xt910 and i have just installed an aokp rom through the safestrap and then i have just uninstall the safestrap with the boot manager also now i just cant have any rom as safestrap is uninstalled .after the reboot of the phone it simply shows motorola logo .
krishna4741 said:
guys , i have motorola razr xt910 and i have just installed an aokp rom through the safestrap and then i have just uninstall the safestrap with the boot manager also now i just cant have any rom as safestrap is uninstalled .after the reboot of the phone it simply shows motorola logo .
Click to expand...
Click to collapse
You won't get very much help in the desire HD forum.
Sent from my GT-I9505 using xda app-developers app

[Q] E: Can't open CACHE:recovery/log

I'm pretty new to rooting and flashing, but did flash several ROMs over the period of a few months. Recently, I wanted to clean my phone up so I thought I'd start from scratch. I unrooted which which went well and then rooted again last night via Unrevoked (3.70). I used bootloader for AmonRa's 2.3 recovery which went well, made a nand, and flashed Miks 4.5 ROM. Since then, when booting into recovery, I see 'E: Can't open CACHE:recovery/log' and it worries me as I have no clue what it means. Also, and I'm unsure if it's even related, but my Market worn't download anything anymore.
Any thoughts/solutions?
Thanks in advance!
cdadams1223 said:
I'm pretty new to rooting and flashing, but did flash several ROMs over the period of a few months. Recently, I wanted to clean my phone up so I thought I'd start from scratch. I unrooted which which went well and then rooted again last night via Unrevoked (3.70). I used bootloader for AmonRa's 2.3 recovery which went well, made a nand, and flashed Miks 4.5 ROM. Since then, when booting into recovery, I see 'E: Can't open CACHE:recovery/log' and it worries me as I have no clue what it means. Also, and I'm unsure if it's even related, but my Market worn't download anything anymore.
Any thoughts/solutions?
Thanks in advance!
Click to expand...
Click to collapse
try booting into recovery and wiping your cache
I thought I tried that already per a suggestion I read somewhere, but it didn't work. Lemme try it again and I'll post back in a few.
Thanks!
if it doesnt work try downloading terminal emulator from the market (free) and run this command:
su
cd /cache
rm -rf *
do you have rom manager, believe rom manager lets you flash amon ra recovery, its an option at the bottom of the menu, if it lets you flash and you are able to go into recovery i would wipe cache, dalvik and data and the reflash the rom(you should probably download it again and put it in the root of your sd card, i say re-download just to make sure you didn't get a corrupted download the first time)
cdadams1223 said:
... Recently, I wanted to clean my phone up so I thought I'd start from scratch....
Click to expand...
Click to collapse
Next time just wipe EVERYTHING twice and flash THIS, then you will be stock and clean BUT still rooted
@blakeboys - Well, your suggestion worked. Apparently I tried wiping my Dalvik-cache and not just cache. This time I did both and voila...it worked. I'm now able to download apps from the market again. I haven't returned to recovery to see if I get that same error so I'm not sure about that.
@emcp422 - I do have ROM Manager, but I do not use it. It is not set-up yet to flash the latest AmonRA which is 2.3. I never had a problem of accessing my recovery. If it happens again, I will do as you suggested and re-download it and install it again.
Thanks for yall's help!
no problem, glad we could help ya
blakeboys said:
Next time just wipe EVERYTHING twice and flash THIS, then you will be stock and clean BUT still rooted
Click to expand...
Click to collapse
Will do...thanks man!
cdadams1223 said:
@blakeboys - Well, your suggestion worked. Apparently I tried wiping my Dalvik-cache and not just cache. This time I did both and voila...it worked. I'm now able to download apps from the market again. I haven't returned to recovery to see if I get that same error so I'm not sure about that.
@emcp422 - I do have ROM Manager, but I do not use it. It is not set-up yet to flash the latest AmonRA which is 2.3. I never had a problem of accessing my recovery. If it happens again, I will do as you suggested and re-download it and install it again.
Thanks for yall's help!
Click to expand...
Click to collapse
Actually ROM manager does flash Amon Ra 2.3 for some reason the app shows 2.2.2 or whatever but if you boot into recovery its actually 2.3
RileyGrant said:
Actually ROM manager does flash Amon Ra 2.3 for some reason the app shows 2.2.2 or whatever but if you boot into recovery its actually 2.3
Click to expand...
Click to collapse
That's good to know! Thanks!

[Q] Semi-Bricked I think? 100% NOOB

So awhile back i have rooted my phone with unrevoked then, now i was like i wanna full root, so i put the pc36img and follow instructions, i try to "update" one thing was bypassed another failed tryed to reboot phone and here i am.
S-OFF
No clockworkmod i had it and since i tryed to install this new thing its gone, how do i fix this? PLEASE HELP
0odama said:
So awhile back i have rooted my phone with unrevoked then, now i was like i wanna full root, so i put the pc36img and follow instructions, i try to "update" one thing was bypassed another failed tryed to reboot phone and here i am.
S-OFF
No clockworkmod i had it and since i tryed to install this new thing its gone, how do i fix this? PLEASE HELP
Click to expand...
Click to collapse
I'm really not sure what exactly you were trying to accomplish, as unrevoked provides full root. What root method were you trying to follow?
Anyways, now you need to flash a PC36IMG of a recovery image,.using the bootloader. I'd link you to one, but I'm on the Xda app. Once you get recovery flashed, you can reflash a rom of your choice.
Sent from my PC36100 using XDA App
k2buckley said:
I'm really not sure what exactly you were trying to accomplish, as unrevoked provides full root. What root method were you trying to follow?
Anyways, now you need to flash a PC36IMG of a recovery image,.using the bootloader. I'd link you to one, but I'm on the Xda app. Once you get recovery flashed, you can reflash a rom of your choice.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
It was the semi root one, im pretty sure cause my evo wouldnt let me run some FULL root access apps like titanium back up and such, how would i flash a recovery image? my phone is stuck at the htc evo 4g boot screen, i can get to the bootloader and it trys (everytime) to to install the PC36IMG and it doesnt work :/
What was the PC36IMG you tried to flash? And where did you try to flash it - the bootloader or recovery? You're saying that it didn't flash successfully, correct?
If all you need is your recovery back and everything is fine, you just need to flash Clockwork again. You can do this through the bootloader or by downloading Rom Manager and choosing "flash ClockworkMod Recovery".
If you want/need to flash through the bootloader, first delete the PC36IMG on your SD card then download the one of CWM that I'll link you to. Put it on the root of your SD card and power down the phone. Boot into the bootloader by holding the volume down button and power button simultaneously. It should check for the PC36IMG and ask you to update. Choose yes, then no when it asks you to reboot. Choose recovery from the menu and you should boot into ClockworkMod. If you don't need to do anything recovery related, just choose to reboot from there.
PC36IMG here: http://db.tt/9sksyTK
My Evo + xda Premium App = This post.
Sorry, I missed the action. I was typing on my phone and cleaning at the same time
If your phone won't boot, you'll need to wipe cache, dalvik cache and data then flash a new rom. You can try just wiping cache and dalvik then rebooting to see if that will help, but it probably won't.
EDIT: It could've been that you needed busybox and you really were fully rooted. Did the bootloader say s-off before all of this? If it did, you've been nand unlocked all along.
My Evo + xda Premium App = This post.
Ok I have the Clockwordmod working thank you, Phone still wont boot, Im guessing cause it Doesnt have a rom to boot, Idk how to install roms either sadly .
So I think I need a rom to install from zip, but idk how to get a rom thats worth trying to install, last time i tried to install it cam up with :
"Amend Scripting is no longer supported"
"Please switch to edify scripting"
-Steps into the fray-
1. Place the attached file on your sdcard, then boot into the bootloader [vol+down while phone is booting up] let it scan, the apply update., reboot, reboot into recovery and you'll be on amon_ra 2.3 You got the error cuz CWM 3.0+ doesn't support amend scripting [old], only supports edify [new].
As for a rom, I'd recommend CM7.
> http://mirror.teamdouche.net/?device=supersonic download a version from there
> http://goo-inside.me/gapps/latest/7/universal/ download the gapps here
In recovery, wipe your factory/data, cache, and dalvik. Install rom, select the CM7 you downloaded, go back, wipe cache and dalvik, then flash the gapps, then reboot.
Ok Following the latest post's steps and I'm Installing cm7 now thank you people so much for the help so far, ill let you know if everything goes well.
Never a problem, were you in good hands long before I got here.
Nice Rom, Everythings back to normal and its really cool, Thank you guy's for all the help
Glad we could all help.
Before i end this lol, is there anyway for 4g on cm7?
Settings > CM Settings > Interface > Notification Power widget
scroll down to mobile data [3G], then wimax is 4G, select both [and whatever else you want] and then you can toggle it from the notification.
I mean this in the most non homo-sexual way..i love you
0odama said:
I mean this in the most non homo-sexual way..i love you
Click to expand...
Click to collapse
No need to declare it if you got nuthin to hide.
can i just ask you questions that I have about the phone and certain things if/ or if not even possible?
Yea, feel free to reply here or send me a pm.
Ok 1. Is there anyway to BOOST the audio output on the Evo? Been looking forever,
2. A link to working flashable boot animations for cm7.
3. Anything else thats really cool that im obviously missing out on? lol
0odama said:
Ok 1. Is there anyway to BOOST the audio output on the Evo? Been looking forever,
2. A link to working flashable boot animations for cm7.
3. Anything else thats really cool that im obviously missing out on? lol
Click to expand...
Click to collapse
1. http://dl.dropbox.com/u/19699565/DSP Manager.zip Extract the apk, then install on your phone- dsp manager is an equalizer, so that should help.
2. http://forum.xda-developers.com/showthread.php?t=992015
http://forum.xda-developers.com/showthread.php?t=985251
3. Well, you can check out themes and apps for themes/mods for CM7. I'd look into launcer pro/adw, ect, for a launcher, you can find icon packs along with wallpapers in themes and apps to get your desired look.
teh roxxorz said:
1. http://dl.dropbox.com/u/19699565/DSP Manager.zip Extract the apk, then install on your phone- dsp manager is an equalizer, so that should help.
2. http://forum.xda-developers.com/showthread.php?t=992015
http://forum.xda-developers.com/showthread.php?t=985251
3. Well, you can check out themes and apps for themes/mods for CM7. I'd look into launcer pro/adw, ect, for a launcher, you can find icon packs along with wallpapers in themes and apps to get your desired look.
Click to expand...
Click to collapse
Thank you soooo much, And to flash boot animations you go to recovery and and just flash there right? i had launcher pro before and done the whole theme shiznit already lol but thanks

Categories

Resources