Related
I did the root and I have the WiMAX setting and Wifi Tethering is working somewhat but I cant figure out how to flash my rom..I dl'd DamageControl 3.2 but i dont know what to really do now...When i try use ROM Manager I get the error..."an error occurred while attempting to run priviledge commands!" I'm just lost as to what i do now to start using a different rom
Bump.....ANYONE?!
So the following questions would need to be answered:
1) What version of stock were you running before you rooted? (i.e. 1.47, 1.32)
2) What root method did you use?
3) What recovery do you have?
4) If you have wireless tether working than you would need to have installed a custom kernel, which one did you install?
I'm sorry that no one else has tried to assist you in this, however, next time please post this in Q&A as this is for development purposes.
~Jasecloud4
nova0387 said:
I did the root and I have the WiMAX setting and Wifi Tethering is working somewhat but I cant figure out how to flash my rom..I dl'd DamageControl 3.2 but i dont know what to really do now...When i try use ROM Manager I get the error..."an error occurred while attempting to run priviledge commands!" I'm just lost as to what i do now to start using a different rom
Click to expand...
Click to collapse
my personal experience sometimes if your using the rom mangager to flash roms it doesnt always wipe it fully so i use amon recovery all the time now
Im honestly not sure which version i was running b4 I just my Evo about 4 days ago...I used the SimpleRoot 1.47 to root my phone...all went fine for rooting...I didnt install any custom kernal...I pretty new at this so bare with me a bit if you could
and thnx for your time for even replying man!
nova0387 said:
Im honestly not sure which version i was running b4 I just my Evo about 4 days ago...I used the SimpleRoot 1.47 to root my phone...all went fine for rooting...I didnt install any custom kernal...I pretty new at this so bare with me a bit if you could
and thnx for your time for even replying man!
Click to expand...
Click to collapse
i honestly dont know anything about that simple root i have heard that it does work though i rooted in the beginning with toast's method. anyway what happens when you try and get to recovery mode IE powering the the phone off, then holding the volume down button while powering the phone on?
danon.brown said:
i honestly dont know anything about that simple root i have heard that it does work though i rooted in the beginning with toast's method. anyway what happens when you try and get to recovery mode IE powering the the phone off, then holding the volume down button while powering the phone on?
Click to expand...
Click to collapse
Well when i try to go into recover mode it first gives me a black screen that shows a cell phone and a triangle with a exclamation point then i hold the volume up keyand press power and it says "e can't open cache recovery command" n then takes me to a screen where it says
Android system recovery <2e>
use d-pad to highlight; center to select.
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
nova0387 said:
I did the root and I have the WiMAX setting and Wifi Tethering is working somewhat but I cant figure out how to flash my rom..I dl'd DamageControl 3.2 but i dont know what to really do now...When i try use ROM Manager I get the error..."an error occurred while attempting to run priviledge commands!" I'm just lost as to what i do now to start using a different rom
Click to expand...
Click to collapse
Okay during the process of rooting my device, ebo 4g, v1.3x
I ran into the same problem, you have to or I'm sure on this forum just do some research,.....
In RA, dalvik wipe, cache wipe and phone wipe. Then I flashed the rom via sd card, using clockwork custom recovery. If you used Simple root 3 click process you should have clock work.Via step 2.
Rename the Rom to update.zip and place in root sdcard.
Adb reboot recovery
Update.zip from SD card
Finnish do full system wipe and dalvik cache.
Make sure you are nand protected before flashing.
Via step 3
I don't know if this mighhelp just some recent stuff I ran into. Rooted my g1 a WHILE back. Hope these noobietips help lol
Sent from my PC36100 using XDA App
Do this! It's the fastest and easiest way.
Once you get 1.47 and singed sigs then do DC ROM again.
http://forum.xda-developers.com/showthread.php?t=715915
elitekernel said:
Okay during the process of rooting my device, ebo 4g, v1.3x
I ran into the same problem, you have to or I'm sure on this forum just do some research,.....
In RA, dalvik wipe, cache wipe and phone wipe. Then I flashed the rom via sd card, using clockwork custom recovery. If you used Simple root 3 click process you should have clock work.Via step 2.
Rename the Rom to update.zip and place in root sdcard.
Adb reboot recovery
Update.zip from SD card
Finnish do full system wipe and dalvik cache.
Make sure you are nand protected before flashing.
Via step 3
I don't know if this mighhelp just some recent stuff I ran into. Rooted my g1 a WHILE back. Hope these noobietips help lol
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Ok when i go to SimpleRoot and i click extras it says flash recovery...then i can select from Clockwork or RA...I've tried both and they just say flashed successful but nothing different happens...I'm not really sure what ADB reboot recovery is?
stewie-droid said:
Do this! It's the fastest and easiest way.
Once you get 1.47 and singed sigs then do DC ROM again.
http://forum.xda-developers.com/showthread.php?t=715915
Click to expand...
Click to collapse
I ttried that and it works fine until i get to the part about the su file...it doesnt let me go into recovery mode it shows me the black screen with a cell phone and a triangle with an exclamtion point
nova0387 said:
Ok when i go to SimpleRoot and i click extras it says flash recovery...then i can select from Clockwork or RA...I've tried both and they just say flashed successful but nothing different happens...I'm not really sure what ADB reboot recovery is?
Click to expand...
Click to collapse
adb reboot recovery just reboots your phone into recovery mode. once your in that do all the wipes i think its 3 dlvk, data and something else. power off the phone once more then boot to recovery again. now one of the options is flash from zip go there and you should find whatever rom your trying to flash. also you should be putting your zipped rom files in the root directory of your sdcard. on a side not if your on a mac dont download them with safari use firefox or something else
nova0387 said:
Ok when i go to SimpleRoot and i click extras it says flash recovery...then i can select from Clockwork or RA...I've tried both and they just say flashed successful but nothing different happens...I'm not really sure what ADB reboot recovery is?
Click to expand...
Click to collapse
also clockwork and ra are 2 different types of recovery you wont notice anything until u actually reboot the phone into recovery mode
Ok i clicked flash rom on the simple root again and this time it brought up a black and green screen and more options...I selected apply zip from sd card and went down and selected the Damagecontrol zip...it said it installed successfully but now when i go to reboot my phone it keeps reloading the sprint 4g screen and wont boot all the way up!?
nova0387 said:
Ok i clicked flash rom on the simple root again and this time it brought up a black and green screen and more options...I selected apply zip from sd card and went down and selected the Damagecontrol zip...it said it installed successfully but now when i go to reboot my phone it keeps reloading the sprint 4g screen and wont boot all the way up!?
Click to expand...
Click to collapse
you forgot to wipe something common problem.. reboot to recovery again.. go to the wipes part and do all of them.. reboot one last time to recovery then flash DC it should work then
wipe the first 3 if your on RA 1.7.0.1 data/factory, cache, and dalvik.. then reboot into recovery again and flash
nova0387 said:
Ok i clicked flash rom on the simple root again and this time it brought up a black and green screen and more options...I selected apply zip from sd card and went down and selected the Damagecontrol zip...it said it installed successfully but now when i go to reboot my phone it keeps reloading the sprint 4g screen and wont boot all the way up!?
Click to expand...
Click to collapse
nova,
I had the same boot loop issue. My thread for it here:
http://forum.xda-developers.com/showthread.php?t=728955
The issue was that I wasn't totally 100% rooted. By carefully following these directions, I was able to resolve my issue:
http://forum.xda-developers.com/showthread.php?t=721055
I hope this helps also, I did it using the "PC" method. If you have questions regarding those instructions I'd be happy to share my personal experience.
Ok Ok Ok!!! I think I jsut got it my dood! How do i know tho? It booted up and everything just fine and i have wayy more apps including like Dconfig ad superuser permission...is that kinda how i kno?
nova0387 said:
Ok Ok Ok!!! I think I jsut got it my dood! How do i know tho? It booted up and everything just fine and i have wayy more apps including like Dconfig ad superuser permission...is that kinda how i kno?
Click to expand...
Click to collapse
Errr... maybe? Superuser permission, etc. certainly doesn't come with stock. It depends on the ROM you installed. Here's one way to find out...
Go to Settings -> About Phone -> Software Information and check the "Build Number". AFAIK it's impossible to install DamageControl without full root (I tried to myself before fixing my root and going to Fresh 1.0.1) so if that's what you have I'd say you're good.
There may be a better way but that's all I know.
aikeru said:
Errr... maybe? Superuser permission, etc. certainly doesn't come with stock. It depends on the ROM you installed. Here's one way to find out...
Go to Settings -> About Phone -> Software Information and check the "Build Number". AFAIK it's impossible to install DamageControl without full root (I tried to myself before fixing my root and going to Fresh 1.0.1) so if that's what you have I'd say you're good.
There may be a better way but that's all I know.
Click to expand...
Click to collapse
Yep my Build Number says DamageControl v3.2.3! Thnx again everyone who tried to help me and def a special thnx to Danon.Brown! Hollllllla
Everytime I try to flash an update.zip file using Rom Manager, it just reboots into clockwork recovery and does nothing. I've been having to manually flash in recovery. I've tried reflashing recovery, reinstalling Rom Manager, and even flashed stock image and rooted again, nothing fixes it. Any ideas?
Delete sry wrong post
go to rom manager and re download clockworkmod at top that worked for me. btw rom manager is having issues with some roms
Upstreammiami said:
go to rom manager and re download clockworkmod at top that worked for me. btw rom manager is having issues with some roms
Click to expand...
Click to collapse
Worked for me to. Takes just a few seconds.
Redemption 2.0.3. king kernel oc-uv #5. incredible revolution theme, rosie removed. Launcher pro. Prepare for glory splash. Various boot animations.
motempo said:
Everytime I try to flash an update.zip file using Rom Manager, it just reboots into clockwork recovery and does nothing. I've been having to manually flash in recovery. I've tried reflashing recovery, reinstalling Rom Manager, and even flashed stock image and rooted again, nothing fixes it. Any ideas?
Click to expand...
Click to collapse
Koush switched ROM Manager from fakeflash to real flash yesterday; maybe this is why you're having issues? Do you have S-OFF?
larsrya8 said:
Koush switched ROM Manager from fakeflash to real flash yesterday; maybe this is why you're having issues? Do you have S-OFF?
Click to expand...
Click to collapse
I've been having this issue for about a month or longer. I've tried on basically every rom, s-off. I've tried downloading clockwork again, no fix.
motempo said:
I've been having this issue for about a month or longer. I've tried on basically every rom, s-off. I've tried downloading clockwork again, no fix.
Click to expand...
Click to collapse
I've have the same problem, and it's been about the same amount of time, a little more than a month... I'm not sure what has happened to cause this, but I cannot get it fixed for the life of me.
Jim
Its a corrupted cache partition. I can post instructions later, you need to know how to use adb.
1.reboot to recovery and adb shell
2. mount /system (you can do this in clockworkmod under mounts and storage)
3.unmount cache(same as above mounts and storage)
3./system/bin/e2fsck -p /dev/block/mmcblk0p2
reboot
then 'Flash Recovery" from Rom Manager
Try to Backup with Rom Manager and it should work now
nevermind, fixed it, thanks luniz7
It seems like every time I mount my phone to Ubuntu on Oracle Virtual Box, my cache seems to get corrupted and I have to repair it all over again. Anyone have any ideas why that is?
luniz7 said:
Its a corrupted cache partition. I can post instructions later, you need to know how to use adb.
1.reboot to recovery and adb shell
2. mount /system (you can do this in clockworkmod under mounts and storage)
3.unmount cache(same as above mounts and storage)
3./system/bin/e2fsck -p /dev/block/mmcblk0p2
reboot
then 'Flash Recovery" from Rom Manager
Try to Backup with Rom Manager and it should work now
Click to expand...
Click to collapse
Bookmarked!
You are a lifesaver (or at least a significant time saver and stress reducer) luniz7!
Thanks
got my evo about a month ago. rooted lastnight since unrevoked finally pushed out their 3.3 version which is updated for my version of hboot (2.02). the root went very smoothly. i installed the latest cyanogenmod rom, only to discover there was no market or gmail app with the rom! wish i had known that before. after doing some research online, i found out i needed to flash or install a "gapps" apk. so, looked around for that for a couple hours and couldn't find it. i downloaded what i thought would be the right .zip file to get the market on my phone (a vending.apk that was listed in another thread having to do with this same issue). so anyway... downloaded that, moved it to the root of my sd card, flashed it through clockworkmod recovery (by the way, everything up until this point was perfect) and finally rebooted my phone... only it never rebooted. the white htc EVO 4G screen was there. then, black screen, as if it was about to begin the cyanogenmod boot screen and fully boot. but, no. it went from white evo screen to black screen... to OFF. after this, i couldn't even turn it on to get it into hboot or access recovery. tried to do that for two hours. and finally i was able to get in... so i tried doing a factory/data reset through recovery, then a cache clear, then reboot. nothing. same thing. went back into recovery, tried reflashing cyanogenmod rom again. nothing. tried flashing myn's rom. nothing. all i get is installation aborted.
i am pretty sure that this is not a complete brick since i am now able to access hboot and recovery. but if i can't flash anything... and i'm stuck in hboot and recovery and cant boot my phone... what the hell do i do now? please help me figure this out!! anybody have any good advice or a known fix...??
Boot into recovery. Do a factory reset. then wipe cache and dalvik catch. Re flash cynagon and let it boot. You then need to find gapps.zip. Boot into recovery flashing gapps.zip.
i did all that. step by step. and when i reflashed the rom, that is when it wouldn't install, saying installation aborted. but, i'm gonna do it again. let's see if my phone wants to play nice now...
brtnygrey said:
i did all that. step by step. and when i reflashed the rom, that is when it wouldn't install, saying installation aborted. but, i'm gonna do it again. let's see if my phone wants to play nice now...
Click to expand...
Click to collapse
If that does not work! you are going to have to update with sprint lovers rom, that is in a PCM36IMG.ZIP. Install it by holding the _vol and th power button, boot into boot loader, than it will search for the zip file and ask you if you want to update, say yes ans just weigh for it to be done. Its going to take few minutes first boot! just hold on. I hope this helps in anyway.
evolishesh said:
If that does not work! you are going to have to update with sprint lovers rom, that is in a PCM36IMG.ZIP. Install it by holding the _vol and th power button, boot into boot loader, than it will search for the zip file and ask you if you want to update, say yes ans just weigh for it to be done. Its going to take few minutes first boot! just hold on. I hope this helps in anyway.
Click to expand...
Click to collapse
do you think that sprintlovers rom will install even if no other rom will install? because... i was able to install Gapps.zip file just fine. but every rom i install is unsuccessful.
brtnygrey said:
do you think that sprintlovers rom will install even if no other rom will install? because... i was able to install Gapps.zip file just fine. but every rom i install is unsuccessful.
Click to expand...
Click to collapse
The springlovers rom gets flashed the same way sprint flashes there upgrades so it should
Sent from my SPH-D700 using Tapatalk
mysteryemotionz said:
The springlovers rom gets flashed the same way sprint flashes there upgrades so it should
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
ok is the install through recovery supposed to be almost instantaneous? it didn't take a minute like every other rom. and after reboot (10 minutes ago) i'm still sitting on the white htc EVO 4G screen. i don't think this is working either. but i really do appreciate your help. any other suggestions? is there anything else through recovery that I can do (since i cant make it past that) that might fix my system? anything in partition? i'm so stuck!
mysteryemotionz said:
The springlovers rom gets flashed the same way sprint flashes there upgrades so it should
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
and also... when i go into hboot, and it runs through the "checking sd" thing before i can select options... it says "no image or wrong image". what?
Nothing is working!!
Did you try a rooted RUU yet?
http://forum.xda-developers.com/wiki/index.php?title=HTC_Supersonic/ROMs
Wipe everything twice first (just to be safe). Are you using Amon RA or Clockwork, by the way? The only other thing I can think of would be that your SD card isn't formatted properly, but that would have to mean you intentionally formatted it or put in a new one that didn't have the right files on it.
SilverZero said:
Did you try a rooted RUU yet?
http://forum.xda-developers.com/wiki/index.php?title=HTC_Supersonic/ROMs
Wipe everything twice first (just to be safe). Are you using Amon RA or Clockwork, by the way? The only other thing I can think of would be that your SD card isn't formatted properly, but that would have to mean you intentionally formatted it or put in a new one that didn't have the right files on it.
Click to expand...
Click to collapse
i am using clockwork. i've wiped so many times... but i can't make anything happen. and, i did format the sd card eventually, but not until a couple of hours ago... and only as a last resort because nothing else worked and i've been trying to fix this since last night, so i figured it couldn't hurt. but if that is part of the problem... how can i fix it? thanks for your response. i don't know what else to do other than take it in for a switch.l but if i can get into hboot... then sprint can too... and they will see that i'm rooted and void warranty. so am i completely screwed?
I had same issue.
I just reflashed the sprintlover rom (PC36IMG.ZIP) which came with Amon_RA recovery.
Then i installed the CM6 with Amon_RA recovery and everything works fine now.
Good that i did Titanium backup few days before
This is happening to me too. Almost everything he's describing is the same. Except I installed a gapps.zip and then it wouldn't boot after that. No matter what I flash, it either gives me a status 7 error and aborts the install or it may "install successfully" but it never boots. Also tried the pc36img.zip as well. I had a nandroid backup and tried to restore that, but that aborts saying cannot flash boot image. Tried a rooted and also an unrooted stock ruu, they won't work and the .exe version on a pc can't find my phone when I plug it in and power it on. Anyone have any Ideas for me. I can get more specific error messages and hboot numbers, etc. if needed.
I think you should get Amon recovery PCIMG zip file and change recovries and try everything again... IMO
Edit: I posted the Amon file and all you have to do is rename it to PCIMG.zip. Also I think the gapps you were looking for you can find on the cm site itself or within that thread. Sorry if it sounds like I a being negative but I see alot of people get on noob and I wondered why but unfortunately its because things like this happen. In the OP for CM6 it says to use Amon and backup your keys. Now if you get your phone backup you got to first check and make sure your RSA keys are in tact unless you backed them up already.
Joeykrim has a app on the market to check or there are numerous threads on what to do. Sorry and hope it works out for you if not INS is your friend
View attachment PC36IMG-Amon-V2.2.1.zip
playya said:
I think you should get Amon recovery PCIMG zip file and change recovries and try everything again... IMO
Click to expand...
Click to collapse
some people dont like clockwork with the evo's...thats just the general feeling im getting from the boards. i just got my evo rooted and what not. i use clockwork and it has worked well for what i need.
op, try amon like has been suggested.
tailsthecat3 said:
some people dont like clockwork with the evo's...thats just the general feeling im getting from the boards. i just got my evo rooted and what not. i use clockwork and it has worked well for what i need.
op, try amon like has been suggested.
Click to expand...
Click to collapse
Yea but have you tried Amon and from what I read and this is from developers Amon has a much better handle on things as far as backing stuff up, partitions and protection of keys.
I ran Clockwork on my wifes phone because to me its simple and works with Rom manager but after a while I just said F it and switched since it was messing up my backups. Hey to each his own..
Ok, I don't believe that your device is bricked. You may have flash the wrong gapps or something, but is should be easy to fix.
First, download these 3 files and put them on the root of your SD card:
Cyanogen 6 stable for evo
Latest gapps for HDPI
Calkulin's format all
Red through first, then follow my instructions EXACTLY:
1.) Boot into recovery.
2.) Flash Calkulin's all format. This will wipe everything that needs wiping. (everything but the SD card)
3.) Without exiting recovery immediately flash the CM6 .zip. Do not flash the gapps yet.
4.) Reboot the device now. It will boot into cyanogen, but will not have market or anything. Once fully booted, reboot to recovery.
5.) Do not wipe or anything, just flash the gapps HDPI.
6.) Boot the phone and enjoy.
Evo won't load any roms, can only get into clockwork recovery
Okay, so if I try your steps, just like before The install gets almost to the end, then I get:
"assert failed: write_raw_image ("/tmp/boot.img","boot")
E:Error in /sdcard/update-cm-6.1.2-supersonic-signed.zip
(Status 7)
Installation aborted.
Sorry Playya, I wanted to try this one more time first. I'm going to try loading Amon Ra now. do I need to rename it to pcimg.zip or should i just flash the current file name?
In case it helps anyone, I have
ClockworkMod Recovery v2.5.0.1
my boot loader screen shows
SUPERSONIC EVT3 SHIP S-OFF
HBOOT-2.10.0001
MICROP-041f
TOUBH PANEL-ATMELC03_16ac
RADIO-2.15.00.11.19
Oct 15 2010
Awesome, Amon Ra Worked, and now i'm up and running on cyanogen mod with google apps as well. My only problem now, is I can't backup, when I try it says oops... something went wrong! Please check the recovery log!
hcavlnch said:
Awesome, Amon Ra Worked, and now i'm up and running on cyanogen mod with google apps as well. My only problem now, is I can't backup, when I try it says oops... something went wrong! Please check the recovery log!
Click to expand...
Click to collapse
it may say oops if you battery level is low... I think Amon is so much better its just that Unrevoked puts Clockwork in with their root so people get lazy and leave it in... Amon - its the way to go.
1. Charge your battery and try again
2. Backup your wimax keys - then check how big the file is and hopefully its like 12 megs... If so keys may be ok
hello all, noob here. searched the forums already, not quite the same problem here.
I just rooted my phone with unrevoked 3.32, had zero problems. I confirmed that i had nand unlocked in hboot (says S-OFF). I started up my phone without problems after rooting, checked and I had superuser permissions in the app drawer. i then proceeded to download busybox, rom manager, my backup for root, and titanium backup from the market, but I did NOT open any of them. I thought I would do a nandroid backup first.
I rebooted into hboot, went to recovery. this started up clockworkmod (that came with unrevoked 3.32), went to backup and restore, and hit nandroid backup. It completed, said done, then i selected "go back" and selected the first option, reboot system now.
I then tried to turn my phone on, just regular power on not into hboot, and i get stuck at the white htc evo 4g screen, it then reboots, and continues to cycle up to that point.
I have NOT flashed anything other than rooting my phone. i haven't wiped anything, done anything else than what i have there.
Hboot version is 2.10
radio version says 2.15.00.11.19
clockworkmod version is 2.6.0.1
EVO is from June 2010, not a new evo.
I can get into hboot and recovery, no problems, but i can't startup the phone.
Please help! i just want to start up the phone, don't want to flash anything yet. Thanks in advance.
Maybe its the busybox that you downloaded. You should hit up recovery and do a full wipe! The start up again. What rom are you running, most roms have busybox included so when you download it I've seen phones get the white screen of death. Grab a rom and reflash it. Since you put busybox that nandroid you made probably is no good. Reason I'm telling you all this is because has happened to me before. Good luck
Sent from my PC36100 using XDA Premium App
ravissimo said:
hello all, noob here. searched the forums already, not quite the same problem here.
I just rooted my phone with unrevoked 3.32, had zero problems. I confirmed that i had nand unlocked in hboot (says S-OFF). I started up my phone without problems after rooting, checked and I had superuser permissions in the app drawer. i then proceeded to download busybox, rom manager, my backup for root, and titanium backup from the market, but I did NOT open any of them. I thought I would do a nandroid backup first.
I rebooted into hboot, went to recovery. this started up clockworkmod (that came with unrevoked 3.32), went to backup and restore, and hit nandroid backup. It completed, said done, then i selected "go back" and selected the first option, reboot system now.
I then tried to turn my phone on, just regular power on not into hboot, and i get stuck at the white htc evo 4g screen, it then reboots, and continues to cycle up to that point.
I have NOT flashed anything other than rooting my phone. i haven't wiped anything, done anything else than what i have there.
Hboot version is 2.10
radio version says 2.15.00.11.19
clockworkmod version is 2.6.0.1
EVO is from June 2010, not a new evo.
I can get into hboot and recovery, no problems, but i can't startup the phone.
Please help! i just want to start up the phone, don't want to flash anything yet. Thanks in advance.
Click to expand...
Click to collapse
Well, I'm not sure what exactly went wrong for ya, but I might suspect it was something to do with some of the apps you downloaded prior to making your backup. The first thing to try, would be to boot to recovery, and wipe cache, and then go to 'advanced' and wipe dalvik cache. Then try to reboot. If that fails, then you're next option (without flashing a new ROM) is to do a data/factory reset. You will however lose all of your apps, settings, contacts, texts, etc. You unfortunately don't really have any other options, unless wiping cache's helps you out. If a factory reset doesn't allow you to boot, then you're most likely going to have to flash a new ROM. And also, I thought that Unrevoked flashed the latest clockwork recovery, which would be 3.0 or somehting like that, no?
Hi k2buckley,
So I tried wiping the cache and the dalvik cache then rebooted, no luck. Does this mean the nandroid backup I made is also corrupt? Restoring that won't do anything will it? So the options are to do a factory reset or flash a new rom? If I lost everything anyway, I might as well try to flash a new rom.
However, to clarify, I didn't "install" busybox. I downloaded the app but I didn't open it up and click install. So even if I flash a new rom, then I install busybox and do a nandroid backup it will work? If so, why didn't it work this time? If I do a factory reset, then do the same thing and install busybox, will the same thing happen? Is busybox incompatible with the sense froyo that comes from the sprint OTA?
ravissimo said:
Hi k2buckley,
So I tried wiping the cache and the dalvik cache then rebooted, no luck. Does this mean the nandroid backup I made is also corrupt? Restoring that won't do anything will it? So the options are to do a factory reset or flash a new rom? If I lost everything anyway, I might as well try to flash a new rom.
However, to clarify, I didn't "install" busybox. I downloaded the app but I didn't open it up and click install. So even if I flash a new rom, then I install busybox and do a nandroid backup it will work? If so, why didn't it work this time? If I do a factory reset, then do the same thing and install busybox, will the same thing happen? Is busybox incompatible with the sense froyo that comes from the sprint OTA?
Click to expand...
Click to collapse
You don't need to download busy box, I would delete that app. If you flash a rooted rom it should already have busybox; if you just rooted your phone and want to download busybox on your current stock rom then it will be ok. I would wipe and flash a new rom just to be safe.
Sent from my PC36100 using XDA Premium App
ravissimo said:
Hi k2buckley,
So I tried wiping the cache and the dalvik cache then rebooted, no luck. Does this mean the nandroid backup I made is also corrupt? Restoring that won't do anything will it? So the options are to do a factory reset or flash a new rom? If I lost everything anyway, I might as well try to flash a new rom.
However, to clarify, I didn't "install" busybox. I downloaded the app but I didn't open it up and click install. So even if I flash a new rom, then I install busybox and do a nandroid backup it will work? If so, why didn't it work this time? If I do a factory reset, then do the same thing and install busybox, will the same thing happen? Is busybox incompatible with the sense froyo that comes from the sprint OTA?
Click to expand...
Click to collapse
Well, I'm not exactly sure why you want to download busy box so badly. Any rom comes with busy box cooked in. I have only once installed busy box. The only time i remember having to do it, was Immediately after I rooted with Unrevoked, i went to use Titanium, and had some error. I hit the problems button and that updated busy box from there. Other than that, I've never messed with it.
And yes, most likely your nandroid backup is not going to be of any value to you. You could try restoring it if you'd like, but I predict it would be a waste of time. And I'm not sure that it matters that you didn't 'open' and click install on busy box. If you downloaded it from the market, wouldn't it just download and install itself automatically? I would just flash a rom, and be done with it. Roll with whatever version of busy box comes with the ROM you flash. As you said, you're only option is a factory reset now, and if you're going to do that, you certainly may as well flash a custom rom at the same time. You just need to download a rom, and put it on your sd card. You can mount the sd card as a disk drive to your computer from within recovery. I use amon ra, and its called USB MS TOGGLE. I'm not sure what it's called in clockwork, but the option is there. So put the rom on your sd card, perform a complete wipe, (i'd flash calkulin's format all.zip as well), flash a rom, reboot, and forget about anything with busy box. It will be installed on the rom already.
If you download busybox from the market and it already has it built in the rom you might bork the rom and get a bootloop. Try it and see for yourself !
Sent from my PC36100 using XDA Premium App
Well, the only reason I download busybox was because I wanted to use titanium backup and it is required. Other than that, I could care less about it. It does not install automatically after downloading. You have to go into the app and choose which version you want to install and I didn't install it. The thing is I didn't want to install any roms in the first place. I wanted to just root the phone for the purpose of wifi tethering. So basically my better option is doing a factory reset.
I won't be able to do this til I get home in a few hours, so if anyone else has any suggestions on how to fix this without losing my data, I would appreciate any tips. Thanks.
If you can get a logcat that should show what is causing it to bootloop. It's 'adb logcat > logcat.txt' to do it, run that and wait for it to loop 3 or 4 times before pushing Ctrl+C to stop it.
Busybox isn't included in the ROM because I didn't flash a ROM! I'm using the sense 2.2 froyo Ron that comes from sprint and HTC. I didn't flash anything as I stated in the title. I just did a nandroid backup and now my phone won't boot.
ravissimo said:
Well, the only reason I download busybox was because I wanted to use titanium backup and it is required. Other than that, I could care less about it. It does not install automatically after downloading. You have to go into the app and choose which version you want to install and I didn't install it. The thing is I didn't want to install any roms in the first place. I wanted to just root the phone for the purpose of wifi tethering. So basically my better option is doing a factory reset.
I won't be able to do this til I get home in a few hours, so if anyone else has any suggestions on how to fix this without losing my data, I would appreciate any tips. Thanks.
Click to expand...
Click to collapse
Right. But unfortunately now, your data seems to be lost. Did a factory reset help anything? If not, you got to wipe and reflash a rom.
Sent from my PC36100 using XDA App
ravissimo said:
Busybox isn't included in the ROM because I didn't flash a ROM! I'm using the sense 2.2 froyo Ron that comes from sprint and HTC. I didn't flash anything as I stated in the title. I just did a nandroid backup and now my phone won't boot.
Click to expand...
Click to collapse
I understand that. As I stated, I'm not sure what's causing your problem. As xhausx said, try getting a logcat
Sent from my PC36100 using XDA App
What method of rooting did you use? What recovery do you have right now? As hausx said you could do a logcat and he'll check it out!
Sent from my PC36100 using XDA Premium App
Hi xHausx,
I will have to wait til I get home to try that, but how do I get into the prompt to type that in dos. Do I need to run anything in hboot or clockworkmod before connecting my Phone and trying that? I am a noob, so even though I've read a lot before rooting, I don't know much. Please assume I need a step by step. Thanks again.
ravissimo said:
Hi xHausx,
I will have to wait til I get home to try that, but how do I get into the prompt to type that in dos. Do I need to run anything in hboot or clockworkmod before connecting my Phone and trying that? I am a noob, so even though I've read a lot before rooting, I don't know much. Please assume I need a step by step. Thanks again.
Click to expand...
Click to collapse
You can use the root tools zip from the link in my sig to get to adb, there is a script in there called OpenShell that will bring up a dos prompt in the right folder. Rooting should have enabled adb during boot so you should be ok on that end.
xHausx said:
You can use the root tools zip from the link in my sig to get to adb, there is a script in there called OpenShell that will bring up a dos prompt in the right folder. Rooting should have enabled adb during boot so you should be ok on that end.
Click to expand...
Click to collapse
OK, so I downloaded and extracted the auto-root tools only zip from your sig, and then ran OpenShell.bat and typed as you said "adb logcat > logcat.txt" with my phone plugged in. said "waiting for device" and then i turned on my phone and let it boot 4-5 times before ctrl+c and pulling the usb. all the logcat.txt says is...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
am i doing something wrong?
my apologies, i've only throughly read on how to root, i hadn't gotten into flashing or anything else yet. just been on xda site for a few days now reading all i could about rooting (which went fine, but now i'm screwed).
dirkyd3rk said:
If you download busybox from the market and it already has it built in the rom you might bork the rom and get a bootloop. Try it and see for yourself !
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
For the hell of it I did just that and it did bork it.... lmao
chefdave12118 said:
For the hell of it I did just that and it did bork it.... lmao
Click to expand...
Click to collapse
Did it really? Lol It did it to me man I was pissed!
chefdave12118 said:
For the hell of it I did just that and it did bork it.... lmao
Click to expand...
Click to collapse
man, for the life of me, i can't believe i didn't do a nandroid before i downloaded the app. for some reason i thought only downloading an app from the market, not flashing anything or whatever, would not screw up my phone.
anyway, since my data is lost, i wanted to try again. can i flash the unrevoked S-ON utility and then the latest Sprint RUU and then re-root? i read somewhere else that it won't remove my wimax/RSA keys or SD card, is that correct? is there a way to backup my RSA keys before I do anything else? should i do that, re-root, then nandroid, then mess with stuff? i basically wanted a stock Sprint EVO but one that's rooted so i can run root-based apps, that's what I want to get to.
Flash the Amon Ra recovery via the AR pc36img.zip file in hboot method, then reboot to recovery, do a full wipe/factory reset and try to boot to system.
I used AlphaRevx to achieve S-OFF and when it asked if I wanted the CWM recovery, I said yes. It installed the recovery properly. I have SU. However, if I try to run Titanium, it says that there is no root access. I have rebooted several times. I tried to flash CM7 and it was stuck in a bootloop. Downloaded from the mirror and it booted up fine. I tried playing around with ROM Manager while I was booted into CM7 and it told me there was no recovery image on the root of the SD card.
Hopefully it's just something simple that I'm overlooking. Any suggestions?
Another thing I though was weird is that I couldn't sync to Gmail while booted into CM7.
To gain root access on the stock rom, you first have to flash thisthrought recovery.
I actually did flash that as well. Still had the same results.
Should I have removed the SU file that was already installed on the sd card and then flashed the patch?
Hmm weird, maybe try flashing one of these 2 roms
this
or
this
Both are based off the stock froyo rom, debloated and rooted.
I'll probably give that a try in a little bit. I suspect that it will not work as I didn't even have root access with CM7 installed.
Maybe before you flash clear all the data at least 2 times, do a factory reset, and clear the dalvik cache. If nothing works try the manual way to flash CWM and reflash it.
I only wiped data/cache once before I flashed each time. I'll try wiping more than once next time.
Do you think I could have flashed a corrupt file for SU?
brocksdad said:
I only wiped data/cache once before I flashed each time. I'll try wiping more than once next time.
Do you think I could have flashed a corrupt file for SU?
Click to expand...
Click to collapse
Make sure you wipe /data, /cache, /system before you flash any rom. If you do this it removes the chances for errors to occur. if you flashed CM7 over the original /system, you might have corrupted the su file.
I don't think that I did, but it is possible. I'll first start by removing the SU file that is on there now and then flashing the patch that you posted up. I'll update after I do that.
I have to wait though, my battery is dead.
Thanks for your help!
No problem. If you didn't format the /system before you flashed CM7, you flashed over the original /system, sometimes it makes no difference, sometimes it messes stuff up. Kinda hit or miss.
Yah normally doing a Factory wipe then a wipe data/cache/dalvik should get her done try rerunning alpharev utility and see what you get
Update: I removed the su-2.3.6.1-ef-signed.zip from the SD card and then flashed the patch. Still having the same issues. I tried to run AlphaRevX again and it came back saying something like "You already have S-OFF with AlphaRev. What do you think you're doing?"
Any other suggestions?
First of all i s-offed and cwmed with alpharev.
Then in cwm i wiped phone + cache + dalvik .
Then flashed this http://forum.xda-developers.com/showthread.php?t=1138274
Then after phone boots and so on i restart in cwm again and flashed this
http://forum.xda-developers.com/showthread.php?t=1160745
After all i got SU in programs and got root for all my apps.
Try this )
The whole point of this is to have Titanium backup installed so I backup all my apps before I flash a ROM.
brocksdad said:
The whole point of this is to have Titanium backup installed so I backup all my apps before I flash a ROM.
Click to expand...
Click to collapse
Hey brocksdad,
Why not give this a shot as this is what I had to do:
-Alpharevx s-off which you've done
-flashed CWM via fastboot adb which seems like you've done: http://forum.xda-developers.com/showthread.php?t=1134520
-flash this patch which will install superuser, busybox, and rooter kernal in the correct places /system/xbin: http://forum.xda-developers.com/showthread.php?t=1134520
-reboot and you should be good to go.
I think you were having the same issues I was in that the SU app would not update the binaries for me, so I had to install the manual patch I found in the development forum.
Let me know if this works for you....
If I wanted to manually put the CWM recovery in there do I just flash OVER what I already have or do I need to remove the recovery that is already installed? If I have to remove it, how do I go about doing that?
brocksdad said:
If I wanted to manually put the CWM recovery in there do I just flash OVER what I already have or do I need to remove the recovery that is already installed? If I have to remove it, how do I go about doing that?
Click to expand...
Click to collapse
You would just reflash over the recovery. I'm hoping you used the recovery that was posted for us and not the one with Rom Manager as that is an older recovery that hasn't been updated for Inc2 support yet.
In any case, it wouldn't hurt to go and do the process over again. You should have fastboot.exe in the same folder as your adb and might as well have the CWM flash .img in that same folder as well to make things easier. once you do that you can flash the SU patch in recovery and you should be good to go.
Update: By the way if you need adb, you can just download the files from the "Temp Root" post in development and download fastboot.exe by searching in google.
I used the recovery that the AlphaRev tool gave me.
I'll give that a try and see how it goes.
Thanks!
brocksdad said:
I used the recovery that the AlphaRev tool gave me.
I'll give that a try and see how it goes.
Thanks!
Click to expand...
Click to collapse
Okay then you should be fine. Go ahead and flash that SU zip in recovery mode. Once you reboot, open up superuser and go to settings. Check the SU binary and make sure it says v2.3.2-efgh (eclair, froyo, gb, honeycomb).
If it does then you should be good to go. Also make sure when there are md5 sums provided by the uploads that you check those to make sure they match so that you don't try flashing corrupted downloads. There's a free app in the market for checking the md5 sums right on your phone, it's called AFV (Android File Verifier)
I just looked at the SU information. It says v2.3.6.3. Underneath it says SU binary voutdated. I tried to update and it comes back with an error saying that su-2.3.1-bin-signed.zip has been placed on the sd card. Please reboot into recovery mode and flash it to update the SU binary.