Hi.
Since I (idiot that I am^^) installed another kernel to my "supernova" Rom on my Desire, I can't overclock it anymore with SetCPU.
So I'd like to reinstall the stock kernel but I can't find a zip anywhere.. Anyone can help?
Try the kernels from the downloads section of the homepage of the rom...
Sorry, seems that I cannot yet post full urls...
supernova.
droidzone.in
/?page_id=24
the problem is, that there are only "non Overclocked" Kernels on this page. No matter which of them I install, i can't choose an overclocked setting in setcpu (i could do so after installing the rom)
EDIT: THats the one that is in the rom itself: Kernel: O2.6.35.10-g3f43272 based [v06-snq-is-still-#01]- snq kernel based on [email protected] #1
I really dont know what of this line is the "type" of kernel i'm looking for ^^
Maybe you could flash the ROM again to get the original kernel, shouldn't delete anything on the phone.
Like this i would screw up the "clean" install I have^^. I think I'm going to install ALL new after a wipe .)
Just download the Rom zip file again. It contains a boot.img which you can just flash using fastboot if you are s-off or using recovery if you know how to make the zip file.
You could also just flash the Rom, if you haven't made changes to the system, it should not change anything else than the kernel
I wiped everything and flashed the rom again.
But in case i need to do it again^^:
Do I need to make a "special" Zip File? Does it need to contain anything but the boot.img?
I know how to zip files / folders with windows, just want to know if there is anything special?
Related
Hi guys. Thinking of installing the Leedroid ROM on my phone. Currently have Android Revolution HD and as you might know a few hours ago I went through some troubleshooting that had me praying to God Almighty because I'm a bit of a noob and I got really worried. Lol
Anyway, I know how to flash ROM's and Radios but how do I flash kernels and ROM "Extras"?
It was flashing an "Extra" that got me in the problem into the mess in the first place so I just wanted to confirm how to do it properly. Also, is flashing the kernel as simple as flashing a ROM? ie:
-Boot into CWM
-Nandroid Backup
-Wipe All
-Install new ROM
-Make sure it all works
-Back into CWM
-Install kernel zip from SD card
?
Thanks very much guys.
When I installed leedroid I installed rom then straight after the kernal without even rebooting. Worked fine for me.
I'll give it a shot later. But still how do I flash extras? Like a Sense 3.0 lockscreen for Leedroid?
Put it on your ssd and open it up in a file explorer (think leedroid has astro) and just run it and it will install.
If that doesn't work for an extra then boot into CMW and install it via zip, but if I recall correctly that won't work for the lock screen and has to be done via opening it up in a file explorer.
If the addon or kernel you've downloaded is a zip file, the easiest way to be sure it's flashable in CWM is to open it up in 7zip, WinRar, etc. and see what's inside. If there is a folder called "META-INF" then you know it can be flashed by CWM.
Most zips are CWM flashable, but some won't be, especially fonts, bootanimations or splash screens. There are usually instructions in the threads for these, though.
Kernels are often built in to the ROM zip, but if you want to change your kernel I recommend jkoljo's tool:
http://forum.xda-developers.com/showthread.php?t=852357
I'd also suggest doing a nandroid backup after flashing the ROM and making sure it all works, before flashing anything else, especially with some of the addons that are still in development. It just gives you a bit more security if you need to roll back.
In flashing roms, I notice that devs are including kernels in the .zip. It appears each dev has their favorites. Without debating which kernel is the "best", my question is can I switch a Zimage (which I assume is the kernel) with another of my liking? Or, if I'm running a particular kernel of my liking, can I flash the Rom without the included Zimage?
.....
Vegasden said:
In flashing roms, I notice that devs are including kernels in the .zip. It appears each dev has their favorites. Without debating which kernel is the "best", my question is can I switch a Zimage (which I assume is the kernel) with another of my liking? Or, if I'm running a particular kernel of my liking, can I flash the Rom without the included Zimage?
.....
Click to expand...
Click to collapse
You should be able to flash a kernel, either through CWM or ODIN without problem.
sk63 said:
You should be able to flash a kernel, either through CWM or ODIN without problem.
Click to expand...
Click to collapse
I realize that. My question was in reference to flashing a rom (which all have a kernel included). Can you switch the Zimage inside the rom .zip prior to flashing...or can I just delete the Zimage inside the rom and flash it without one? I'm trying to avoid the two steps of flashing a rom, then flashing a kernel I prefer.
Ah, I've always just flashed the ROM, then flashed the kernel then rebooted out of CWM. Be nice if there was a utility where you give it kernel and rom and tell it to go, might be a nice feature for ROM Manager to add.
So im planning to go back to 2.1 or 2.2 and sense, so how im going to do this? ( I have #203 Nightly)
After that, will i need to root again, and is it possible to overclock stock wildfire ROM and how? (Install new kernel??)
If youre asking why go back to sense, I just happen to need stableness for next 4 weeks and want to see how much I can tweak Sense. Going back to cm7 in november probably
Mipe
Just install like a new ROM. One such stock rooted Froyo can be found here:
http://forum.xda-developers.com/showthread.php?t=877977
The only different thing is that this will have to be flashed in Clockworkmod 2.x. (I guess you must know how to flash Radio's in CM7, so its not a big issue)
And yes, to OC, you will have to install a custom kernel like this one:
http://forum.xda-developers.com/showthread.php?t=995301
3xeno said:
Just install like a new ROM. One such stock rooted Froyo can be found here:
http://forum.xda-developers.com/showthread.php?t=877977
The only different thing is that this will have to be flashed in Clockworkmod 2.x. (I guess you must know how to flash Radio's in CM7, so its not a big issue)
And yes, to OC, you will have to install a custom kernel like this one:
http://forum.xda-developers.com/showthread.php?t=995301
Click to expand...
Click to collapse
I also found that i have cwm backup from original rom that I can restore. Does this also restore previous radio or kernel or do I have to do it manually?
it will not touch the radio, but it will restore the stock kernel. (Or whichever kernel you had installed when you took that backup)
3xeno said:
it will not touch the radio, but it will restore the stock kernel. (Or whichever kernel you had installed when you took that backup)
Click to expand...
Click to collapse
I got a problem. I want to get original Sense by restoring backup from CWM. Mine works, but has a pattern that i dont remember and a email wich i dont remember either. Does anyone happen to have a backup of a wildfire without password or could someone advice something else? I tried RUU but my win7 x64 is causing trouble, or the drivers.
Just flash the stock froyo ROM I listed in the first post I made in this thread (http://forum.xda-developers.com/showthread.php?t=877977). If you don't know how to get Clockworkmod 2.5.0.x, then:
- Download this attachment, place on your SDCard:
http://forum.xda-developers.com/attachment.php?attachmentid=662193&d=1311319218
- Flash the zip (update1.zip) using your existing Clockworkmod 5.0.2.0
- Device will reboot and will start Clockworkmod 2.5.0.7
- Perform Data Wipe and Choose Install Zip from SDCard, select the ROM Zip file, and let it install.
3xeno said:
Just flash the stock froyo ROM I listed in the first post I made in this thread (http://forum.xda-developers.com/showthread.php?t=877977). If you don't know how to get Clockworkmod 2.5.0.x, then:
- Download this attachment, place on your SDCard:
http://forum.xda-developers.com/attachment.php?attachmentid=662193&d=1311319218
- Flash the zip (update1.zip) using your existing Clockworkmod 5.0.2.0
- Device will reboot and will start Clockworkmod 2.5.0.7
- Perform Data Wipe and Choose Install Zip from SDCard, select the ROM Zip file, and let it install.
Click to expand...
Click to collapse
For the rooted ROM it says No Hboot | No Radio, what does that mean?
jediknight111 said:
For the rooted ROM it says No Hboot | No Radio, what does that mean?
Click to expand...
Click to collapse
Just what is says. It does not include the Bootloader (HBoot), and it does not include the baseband (Radio). So, for these two components, what you are having on your device at this moment will remain. (ie - They will not be updated when you flash the ROM)
3xeno said:
Just what is says. It does not include the Bootloader (HBoot), and it does not include the baseband (Radio). So, for these two components, what you are having on your device at this moment will remain. (ie - They will not be updated when you flash the ROM)
Click to expand...
Click to collapse
I Installed the Rom from recovery, but all I get is the HTC logo and the startup tone then it switches off and I get the same thing again. Help please!
Edit: It's working now but I cannot force move apps like I could do before. Why is that?
jediknight111 said:
I Installed the Rom from recovery, but all I get is the HTC logo and the startup tone then it switches off and I get the same thing again. Help please!
Edit: It's working now but I cannot force move apps like I could do before. Why is that?
Click to expand...
Click to collapse
Because it is a Completely Stock HTC Factory ROM with no support for it.
Hi, sory for newb posts. But this all got a bit more complicated since my HTC days!
I managed to get cmod7 working (remove apk to stop looping on boot!).
But what can I flash now with the CM kernel I have?
Or how/what kernel to flash and what ROM for best/stable device?
I see and have the Mooded rom, but do i need to flash kernel first? And baseband etc.?
All gone strange since i last flashed devices!!
Thanks !
there should be a list of suitable kernels in any rom thread. download the ROM zip to your SD card, use fastboot to boot the kernel, enter cwm and wipe data(if necessary), and flash the zip and any modules if required.
sinkster©
I am gonna try to flash wild for the night rom. I do have a few questions before I start. Right now I believe I am on stock rom, rooted. These are the details under about phone, android version 4.1.2, baseband version S710.10.S.GB08, kernal version 3.0.3+, build number JZ054K.SPH-D710.GC01, software version GB08. With the credentials I have now, I booted into recovery and I'm on a agat 0.3.2 recovery. When I go into my file explorer, I don't see the file for this recovery, it should be a zip, right?? I have a file named agat 0.6.8 that I used when I was rooted on the stock rom, would this recovery work with my current credentials in case I try to flash wild for the night and something goes wrong and I have to restore a backup. I am confused when it comes to this stuff, I just want to make sure I have all my basis covered.
Do I need a different recovery for this wild for the night rom, if so, which one?? Can I do a full wipe data with the credentials I have now> I thought I read somewhere where full wipe creates bootloops. Also, what modem do you recommend and when do I install that, there are many choices of modems, after the rom?? On the wild for the night xda thread, it says something about changing the governor and changing back?? what do I change it to? Also, I heard that the current version has echo issues, is this true? Thanks in advance.
Also, recovery and kernal are in the same package, right?? If I have to flash another recovery, when do I flash that, before the rom??
One last question, what is the order I will flash, kernal, then rom, then gapps, then modem??