Related
Hello all,
I followed the guide to root my phone that was titled "Idiot proof root quide" that can be found on the androidforums. I then installed fresh 0.3 and I've been running that for a while and had no desire to flash the new fresh roms. Well, now that fresh has released a ROM with froyo at its base I've decided to make the jump.
Yesterday I downloaded and installed the latest rom from fresh (3.1.0.1) but I was unaware that there were new radio updates and kernals to install. This is where I'm running into trouble. For some reason when I have 3.1.0.1 installed my phone wont stay connected to the computer. Once I plug the USB cord in it will ask me if I wan't to charge, disk drive, etc but then 2 seconds later it will disconnect. I've gone back to fresh 0.3 and it works fine.
SO, my questions are:
1. How do I install the latest radio for fresh (please help me with links, I've looked but have become easily frustrated)
2. How do I install the latest kernal with Amon Ra flash (it is my understanding that you need this to install the newest radio/kernal). I understand I need fastbook and the android SDK but I don't think I'm setting these two applications up correctly when I download them.
If you can direct me to any threads that will assist me I will greatly appreciate it.
Thanks!
another way you can try is putting the radios on before you flash the rom to fresh3. I would flash using AMon Ra just because there have been reports of clockwork not fully clearing cache/dalvik. The best way to do this in my opinion is if you have rom manager installed at the bottom you will find flash alternate recovery, use that then try clearing wiping everything and reflashing. If you put the radios on your sd card first jsut boot into froyo once then power down flash radio boot, power down flash wimax. boot.
then try and see if you usb is still having problems. If it is let us know.
Download the radios and kernels you want with your phone, then reboot into recovery. All of them flash like ROMs, just select the zip you want and flash it. Just don't wipe first.
I think the order would be kernel first, then radio, then WiMax if necessary. Always reboot at least between radio and WiMax, maybe after kernel as well.
RyboCollier said:
Hello all,
I followed the guide to root my phone that was titled "Idiot proof root quide" that can be found on the androidforums. I then installed fresh 0.3 and I've been running that for a while and had no desire to flash the new fresh roms. Well, now that fresh has released a ROM with froyo at its base I've decided to make the jump.
Yesterday I downloaded and installed the latest rom from fresh (3.1.0.1) but I was unaware that there were new radio updates and kernals to install. This is where I'm running into trouble. For some reason when I have 3.1.0.1 installed my phone wont stay connected to the computer. Once I plug the USB cord in it will ask me if I wan't to charge, disk drive, etc but then 2 seconds later it will disconnect so I went back to fresh 0.3 and it works fine.
SO, my questions are:
1. How do I install the latest radio for fresh (please help me with links, I've looked but have become easily frustrated)
2. How do I install the latest kernal with Amon Ra flash (it is my understanding that you need this to install the newest radio/kernal).
If you can direct me to any threads that will assist me I will greatly appreciate it.
Thanks!
Click to expand...
Click to collapse
New Radio: http://geekfor.me/evo/radio/baseband-215000728/
New Wimax Radio: http://geekfor.me/evo/radio/wimax-26023r01/
No need a custom Kernel for now, the ROM has its own, if you want a Kernel anyways you can flash Netarchy's Revision 3.7.6c - Froyoized but it has a side effects with the camera pixels!
SilverZero said:
Download the radios and kernels you want with your phone, then reboot into recovery. All of them flash like ROMs, just select the zip you want and flash it. Just don't wipe first.
I think the order would be kernel first, then radio, then WiMax if necessary. Always reboot at least between radio and WiMax, maybe after kernel as well.
Click to expand...
Click to collapse
3 out of 5? lol
Wow, thank you for the quick responses guys/gals! So it seems that I was making this more difficult than it needs to be.
Summary of what I need to do:
1. Flash new kernel if I choose to but each ROM comes with a custom kernel.
2. Flash new radio update.
3. Flash Wimax update.
4. Flash fresh 3.1.0.1
Now, I hope this also solves my USB issue that I'm having which only occurs when I have 3.1.0.1 flashed. I'm going to take omegasun18's advice and see if that will correct my issue.
RyboCollier said:
Wow, thank you for the quick responses guys/gals! So it seems that I was making this more difficult than it needs to be.
Summary of what I need to do:
1. Flash new kernel if I choose to but each ROM comes with a custom kernel.
2. Flash new radio update.
3. Flash Wimax update.
4. Flash fresh 3.1.0.1
Now, I hope this also solves my USB issue that I'm having which only occurs when I have 3.1.0.1 flashed. I'm going to take omegasun18's advice and see if that will correct my issue.
Click to expand...
Click to collapse
well i would do it ......
Fresh rom + radio, the reboot, wimax, then reboot again, then kernel, that's waht i did and have everything working no 30fps cap, wi fi tether and all the stuff (remember about the camera issue)
*edit* remember something, you have to left the custom kernel to the end, because as i told you before the rom has its own kernel and will overwrite any other you installed previously
So leave the kernel to the end? Does that kernel you recommended remove the 30fps cap?
yep make sure if you do a kernal you do it AFTER the rom. the radios shouldnt matteer since msot roms dont acctually change the radios when flashed. but i normaly start with the rom and work my way up but otherwise you have it.
RyboCollier said:
So leave the kernel to the end? Does that kernel you recommended remove the 30fps cap?
Click to expand...
Click to collapse
Well..................
I keep running into an issue where my contacts keep crashing when I open the people application or try to send a text message. Any idea as to why this might be happening?
RyboCollier said:
I keep running into an issue where my contacts keep crashing when I open the people application or try to send a text message. Any idea as to why this might be happening?
Click to expand...
Click to collapse
What rom? did you wipe?
So i am new to Samsung (coming from a launch evo) and watched the QBKING77 videos and rooted and flashed Calkulins rom pretty easily. So far pretty simple but I have a question.
I am on stock EL29, What confuses me is the list of all the different modem .zip/.tar that are listed in the Caulkins thread. I couldn't really find a thread or video explaining what the difference is between the many different modems, or what the heck a modem is even. or if i should even worry about those at all. Should i just stick to the stock kernel that came with the rom? If i do decide to change the modem do i just flash/odin and im all set? or do i have to re flash the rom?
From what i learned so far, the kernel and phone radios are one in the same right?
Modem = radio. Also known as baseband under your settings - about phone. Modems are flashed independent of a ROM or kernel.
You can mix and match anytime you'd like. If you have solid service on EL29, no need to switch.
You can use any modem on any gingerbread or ics rom. If using a GB rom, you can't use an ics kernel and vice versa.
Hope that helps
.zip is for flashing via Clockwork Recovery. .tar/.bin is for flashing via ODIN. Most importantly it's vital to read and reread everything and also ask any questions before flashing, like you're doing now. I make Nandroid backups anytime I'm about to make ANY changes. Good luck.
Also keep in mind that anything with F in the version (ex FC07) is an unofficial leak. The latest official is EL29, which you are already on.
As a good practice when I switch modems, is to update PRL and profile then reboot.
Components come in the following packages. These packages will come either in .zip or .tar/.bin form.
1. Modem (Always separate, can use any Modem with any rom)
2. ROM (With Kernel or Without Kernel)
3. Kernel (With CWM or Without CWM, use ICS kernel for ICS rom. Use GB kernel for GB rom)
CWM = Flash .zip and make Nandroid backup
Odin = Download Mode flashing tool that can flash .tar/.bin. It can be used
Don't go around flashing your radio all the time. It can be dangerous and very brick easy.
Thank you guys! This is the info I needed. I'm sticking with EL29 for now since I'm having zero issues on the radio side. And I wasn't going to flash ANYTHING via Odin until I learned more about how it all worked.
Do I need to manually update the kernel when installing Calkulin's 2.9.2 ROM?
I installed Calkulins 2.9.2 ROM quite a while back and have been happy with it. I believe I am on the stock EL29 modem (my baseband version says S710.10 S.EL29).
I am confused about the kernel. When installing Calkulin's ROM, did I also install the "Rogue" kernel? Or did the kernel not change from the stock kernel that was on the phone from before.
From what I have read I believe that if I am still on the stock kernel then I would not be gaining the battery life benefits of the ROM because the scripts installed by Calkulin's ROM would not be running.
Currently my "kernel version" says "2.6.35.7-SPH-D710.EL29-CL852097". I believe that this is the stock kernel from Sprint. If I need to install the "Rogue" kernel, (1) where do I get it from and (2) how do I know I am using the right one for Calkulin's version 2.9.2 (and not V 3.0)?
Thanks for any assistance you can provide,
Kevin
You can find kernels in the wiki in the stickies in dev section. If you turn your phone off completely( no light on the buttons at them bottom). Then you push and hold volume up and power at the same time. Wait for it to go into recovery. Does it say e3 with blue letters or is there a green backround?
Sent from my SPH-D710 using Tapatalk 2
When I go into recovery on the top it says "Rogue ET Recover 1.1.2 (CWM v5.0.2.7)" and the background image says "Team Rogue". I wasn't able to find something that told me what kernel I was on.
Correct me if I'm wrong, but I believe you're on what's called a repacked stock kernel...its the stock el29 kernel with the cwm recovery added to it.
Sent from my SPH-D710 using XDA
Johnny - thats the thing I dont know; I am unsure how to tell what kernel I am on. I have always been under the impression that when I installed Calkulin's 2.9.2 ROM, that it also installed the "Rogue" kernel. But I am now under the impression that I may be on a "stock" kernel.
From what I understand about the ROM, the battery saver tweaks do not work for "stock" kernel. I never quite understood what a "repacked" kernel is.
specialkb01 said:
Johnny - thats the thing I dont know; I am unsure how to tell what kernel I am on. I have always been under the impression that when I installed Calkulin's 2.9.2 ROM, that it also installed the "Rogue" kernel. But I am now under the impression that I may be on a "stock" kernel.
From what I understand about the ROM, the battery saver tweaks do not work for "stock" kernel. I never quite understood what a "repacked" kernel is.
Click to expand...
Click to collapse
K. So there's a couple of things going on here. Let's get you some definitions.
Kernel: Essentially the backbone of the operating system. There are different stock kernels for different versions of Android (one for GB and another for ICS). A stock kernel comes with stock recovery. It is not a good idea to flash anything using this recovery (in some cases it is actually blocked so you can't).
CWM: Clock Work Mod. The original version from Chris. It is considered a "repacked" kernel. It stands apart from a regular kernel because it has a custom recovery built in. There are a few other things packed into it but the main difference is the custom recovery. The EL26 CWM is commonly referred to as stock CWM (not a stock kernel though).
Rogue: Team Rogue is the most common one you'll see for our phones. They took CWM and customized it further. They also developed custom recoveries based if the leaked ICS kernels. There was something causing bricks in the kernels they created, unfortunately we can't quite figure out why until we have source.
If you are seeing Team Rogue when opening recovery you currently have a "customized custom recovery kernel".
If you are flashing anything GB you're ok with what you have. If you're flashing ICS you'll need to use the EL26 CWM.
How this clears things up a bit.
I have been looking around for about an hour or two trying to find a solid tutorial on how to install a custom recovery to install new Roms. I flashed my phone onto Virgin Mobile on FH13. It seems to me that there is more than meets the eye to installing a recovery on this phone. I really don't want to mess anything up at all. Could anyone guide me the right way as to how I can get CWM on my phone? I appreciate any help you can give me. Thanks!
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
RainMotorsports said:
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
Click to expand...
Click to collapse
Also new to the e4gt, im currently rooted on fh13.
say i want to flash paranoidandroid, which kernel (which includes recovery?) would you recommend?
also this is either flashed from odin (pc) or can be done through mobile odin?
then once kernel is flashed, i can then reboot into recovery, wipe and flash rom/gapps?
sorry for all the questions, just want to make sure!
bongzilla said:
Also new to the e4gt, im currently rooted on fh13.
say i want to flash paranoidandroid, which kernel (which includes recovery?) would you recommend?
also this is either flashed from odin (pc) or can be done through mobile odin?
then once kernel is flashed, i can then reboot into recovery, wipe and flash rom/gapps?
sorry for all the questions, just want to make sure!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1953783
RainMotorsports said:
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
Click to expand...
Click to collapse
My phone already has root. Everything else is stock. 4.0.4, build FH13, with no custom recoveries.
I don't understand what you mean in your second paragraph with "repacked stock" or "custom tw kernel".
I am completely lost as to where I should be going. My plan is to install this rom: http://goo.im/devs/Shabbypenguin/E4GT-Nightlies
How would I go around to getting this on my phone?
Also, what about this rom: http://forum.xda-developers.com/showthread.php?t=1810315
I am not sure which rom runs the fastest and most efficient. There are so many kernels for so many things, I have absolutely no idea which kernel to flash and how to flash it.
EDIT: So I have done some more reading up and I THINK I can starting to understand some of it. I assume the steps are to:
1. Install Mobile Odin Lite on my phone.
2. Flash the EL26 kernel on Odin Lite. Link to kernel: http://forum.xda-developers.com/showthread.php?t=1662295 (first kernel on the page)
3. This part I am kinda lost. Not sure if that kernel installed a new recovery or not. I assume I just reboot and go into recovery.
4. Nandroid a backup of my ICS stock that is on now? Can I even go back to this stock backup after putting on a new Rom? Which kernel would I need to install backup of stock?
5. Wipe data, dalvic, and install new Rom using instruction it came with. My problem is I want to run this Rom: http://goo.im/devs/Shabbypenguin/E4GT-Nightlies and it has no instructions. I assume you just wipe data and dalvic?
6. flash Rom, then flash Gapp? It doesn't have a link for any of the Gapps, so either I have to find a link to download Gapp or that rom already comes with it? Not sure.
7. Reboot into new Rom? Not sure if I missed a step or not.
Another question I have is with the kernels. Can I just leave it on the EL26 kernel for daily use of the phone? Say I want to install maybe cm10 next, do I just keep it on EL26?
Sorry for the spam of questions. I like to be 100% certain.
Best bet if your trying to install CM9 is to go to the EL26 CWM kernel as all of the AOSP rom instructions dictate. Using the EL26 kernel means your phone will only boot to Download and Recovery as it will only boot gingerbread roms.
Download the nightly you want to the device and then flash the EL26 CWM kernel in Mobile ODIN. After its all over with you might need to battery pull if you messed up booting into recovery and then boot into recovery (power + vol up). Install the rom. Install gapps. Wipe cache/dalvik but as I will recommend below you should just backup everything and a full wipe.
You can nandroid if you want but it will be making a copy of the ICS rom you have with the EL26 kernel on it so it is literally a restore to the point your starting from not where you were just before that. Its still a good idea if your afraid of losing things. I would use Super Backup from the market to backup your Contacts, Call Logs and MMS. Wipe cache and dalvik and all that. But realisticly you should backup your apps and data if you have Titanium Backup and start fresh just factory reset after your on CM9. Restore your apps with data (no system data) after that. A clean install will present the least of issues, even the Samsung updates from one rom to another are not without issues.
You can not boot anything but gingerbread with EL26 and once you install a rom you will be on the kernel with that rom. So you will have a Linux 3 android kernel with cwm 6 if you go with a CM9 nightly. From there you can flash the next nightly or the next beta etc. Older stuff will not flash from your new setup as AOSP roms have switched to a new device name in the build.prop.
As far as gapps here it is - http://goo.im/gapps/gapps-ics-20120429-signed.zip and don't forget to put this on the device ahead of time or you will have to mount usb and transfer using the pc in recovery.
RainMotorsports said:
Best bet if your trying to install CM9 is to go to the EL26 CWM kernel as all of the AOSP rom instructions dictate. Using the EL26 kernel means your phone will only boot to Download and Recovery as it will only boot gingerbread roms.
Download the nightly you want to the device and then flash the EL26 CWM kernel in Mobile ODIN. After its all over with you might need to battery pull if you messed up booting into recovery and then boot into recovery (power + vol up). Install the rom. Install gapps. Wipe cache/dalvik but as I will recommend below you should just backup everything and a full wipe.
You can nandroid if you want but it will be making a copy of the ICS rom you have with the EL26 kernel on it so it is literally a restore to the point your starting from not where you were just before that. Its still a good idea if your afraid of losing things. I would use Super Backup from the market to backup your Contacts, Call Logs and MMS. Wipe cache and dalvik and all that. But realisticly you should backup your apps and data if you have Titanium Backup and start fresh just factory reset after your on CM9. Restore your apps with data (no system data) after that. A clean install will present the least of issues, even the Samsung updates from one rom to another are not without issues.
You can not boot anything but gingerbread with EL26 and once you install a rom you will be on the kernel with that rom. So you will have a Linux 3 android kernel with cwm 6 if you go with a CM9 nightly. From there you can flash the next nightly or the next beta etc. Older stuff will not flash from your new setup as AOSP roms have switched to a new device name in the build.prop.
As far as gapps here it is - http://goo.im/gapps/gapps-ics-20120429-signed.zip and don't forget to put this on the device ahead of time or you will have to mount usb and transfer using the pc in recovery.
Click to expand...
Click to collapse
Ah, I read it twice and now it makes more sense. I have a pretty good idea of what to do now.
Put rom and gapp on phone, install EL26, backup, full wipe, flash rom and gapp, rom will install new kernel for me, then just reboot.
Last question, I just want to make sure. What exactly is a full wipe on this phone. I have done plenty of full wipes on the evo 4g. I am just asking because I hear some people have problems when they do a full wipe.
I really appreciate your help. Thank you!
Sorry if I jumbled everything together in my post by the I was running out the door. But this Hurricanne has stopped that and I regret not taking my time.
Well what I mean is a factory reset which formats /Cache and /Data. When you install the rom its going to format /System prior to writing the new firmware/rom. /Data has all your user apps, their data and your information etc. This does not wipe the Internal SD or the External SD though at times a line saying it was does come up in CWM.
Just don't do a Factory reset on the stock kernel you are on now, its fine on EL26 its fine on the kernels that come with the CM9 nightlies. Super Backup apparently does app's now too. I have never used it since I have Titanium Backup Pro but figured its also worth mentioning.
A note on turning back. As I said before if you flash the EL26 CWM kernel you wont be able to boot the ICS rom installed on the phone. At that point to go back instead of forward you can flash the FH13 kernel in desktop ODIN or the zip in CWM and you will have the FH13 kernel instead of EL26 and be back where you were. But once you flash the EL26 CWM kernel your goal at that point is flashing your rom of choice in CWM and not things like booting the phone.
You should be "okay" coming from a dirty install just wiping cache. But you may never know if a problem your having is the rom or some left over data unless you go clean and factory reset. Its a choice and its also a choice you can make later as you can always reset later. I would back up anything important first before doing any of this. Not so much a worry about bricking, as just about any normal situation will be recoverable, but more so to the point of if you have to wipe the phone and start from scratch.
RainMotorsports said:
Sorry if I jumbled everything together in my post by the I was running out the door. But this Hurricanne has stopped that and I regret not taking my time.
Well what I mean is a factory reset which formats /Cache and /Data. When you install the rom its going to format /System prior to writing the new firmware/rom. /Data has all your user apps, their data and your information etc. This does not wipe the Internal SD or the External SD though at times a line saying it was does come up in CWM.
Just don't do a Factory reset on the stock kernel you are on now, its fine on EL26 its fine on the kernels that come with the CM9 nightlies. Super Backup apparently does app's now too. I have never used it since I have Titanium Backup Pro but figured its also worth mentioning.
A note on turning back. As I said before if you flash the EL26 CWM kernel you wont be able to boot the ICS rom installed on the phone. At that point to go back instead of forward you can flash the FH13 kernel in desktop ODIN or the zip in CWM and you will have the FH13 kernel instead of EL26 and be back where you were. But once you flash the EL26 CWM kernel your goal at that point is flashing your rom of choice in CWM and not things like booting the phone.
You should be "okay" coming from a dirty install just wiping cache. But you may never know if a problem your having is the rom or some left over data unless you go clean and factory reset. Its a choice and its also a choice you can make later as you can always reset later. I would back up anything important first before doing any of this. Not so much a worry about bricking, as just about any normal situation will be recoverable, but more so to the point of if you have to wipe the phone and start from scratch.
Click to expand...
Click to collapse
That clarified a lot, thanks.
So I did it all. I did a factory reset from the new kernel. did dalvic also. I installed the new rom and gapp. Problem is that once I reboot, it shows the Galaxy SII screen, then goes into a black screen. I can't turn it back on again, so I remove the battery and it can restart. Does the same thing though. I followed your instruction and http://e4gtcm.blogspot.com/p/cm9-install-guide.html
What did I do wrong? I am worried I messed up my phone completely.
EDIT: So I went back into recovery and it was now a new version of CWM. I did everything over again; factory reset, cache, dalvic, and it is doing the same thing. Boots up "Galaxy SII" screen, then a black screen. It seems to still be on in the black screen seeing that it doesn't "turn" on again. I can hold if for 15 second or so for it to reset and does the same thing. Why is there a black screen?
Sorry for not checking back. Your probably freaking right now lol but relax your at a good point everything is fine.
Either a bad download or the nightly you went with happens to be a baddy. I am still on 10/20 I was gonna flash 10/28 today but the weather is screwing with me. goo.im seems pretty slow today.
Download another, battery pull and hold vol up + power until it hits recovery then go into mounts and mount usb storage hook a usb cable to the pc and copy over another build. I would say try 10/20 just because it works pretty good but that won't stop another bad download in which case you have to try try again.
Worst case from here we can just odin you back to stock rooted FH13 or your choice of other. Your phone is fine from what you have told me so far. I can upload one of the builds I have if you think ti would help any.
RainMotorsports said:
Sorry for not checking back. Your probably freaking right now lol but relax your at a good point everything is fine.
Either a bad download or the nightly you went with happens to be a baddy. I am still on 10/20 I was gonna flash 10/28 today but the weather is screwing with me.
Download another, battery pull and hold vol up + power until it hits recovery then go into mounts and mount usb storage hook a usb cable to the pc and copy over another build. I would say try 10/20 just because it works pretty good but that won't stop another bad download in which case you have to try try again.
Worst case from here we can just odin you back to stock rooted FH13 or your choice of other. Your phone is fine from what you have told me so far.
Click to expand...
Click to collapse
Phew! I was pretty positive that I could still get back to something working, just my paranoid self was getting tense. I got 10/28. I guess I will do 10/20. Do you know what the other updates have? I would hate to install something that isn't working its most efficient.
Again, thank you so much. You were of great help! Good luck with the weather issue. Hope you're safe!
I stopped following chris's experimentals so i am not sure what the most recent focuses have been. The Nightlies have whatever code was commited. They are built automatically and can range from very stable to not booting at all. I dont have any of the links on me but someone can get it to you. Reading commits is not exactly 100% user friendly especially if your not a developer. But they often have clues. I would follow the CM9 Beta thread and the CM9 User Support Threads - http://forum.xda-developers.com/showthread.php?t=1874374 and http://forum.xda-developers.com/showthread.php?t=1720771
I used to DL nightlies from work over 3g or 4g all the time and would get a bad dl and end up in situations where even my experienced self felt like I couldn't fix it till I got home and always got the phone running within an hour without the assistance of a near by pc.
I am uploading 10/20 to my server just in case its in Chicago so if your away from the weather it should be unaffected for the most part. Glad its not in NY anymore.
EDIT - http://android.rainmotorsports.net/10-20-CM9-d710-KANG.zip the md5 hash as I have it is 66246125ACDBEF2EBF2144E0CBFEBB7B and it matches the md5 listed on goo.im
RainMotorsports said:
I stopped following chris's experimentals so i am not sure what the most recent focuses have been. The Nightlies have whatever code was commited. They are built automatically and can range from very stable to not booting at all. I dont have any of the links on me but someone can get it to you. Reading commits is not exactly 100% user friendly especially if your not a developer. But they often have clues. I would follow the CM9 Beta thread and the CM9 User Support Threads - http://forum.xda-developers.com/showthread.php?t=1874374 and http://forum.xda-developers.com/showthread.php?t=1720771
I used to DL nightlies from work over 3g or 4g all the time and would get a bad dl and end up in situations where even my experienced self felt like I couldn't fix it till I got home and always got the phone running within an hour without the assistance of a near by pc.
I am uploading 10/20 to my server just in case its in Chicago so if your away from the weather it should be unaffected for the most part. Glad its not in NY anymore.
EDIT - http://android.rainmotorsports.net/10-20-CM9-d710-KANG.zip the md5 hash as I have it is 66246125ACDBEF2EBF2144E0CBFEBB7B and it matches the md5 listed on goo.im
Click to expand...
Click to collapse
I just got it downloaded. It is now up and running perfectly. I appreciate all your help man, thanks a bunch. I live in Washington state. So the weather wont affect me.
Good evening all. I hope this is the right forum to post my question about recovery for my e4g touch. I recently rooted my phone and my phone is currently on the fi27 build. Is there a recovery i can put on there now to go ahead and start flashing ruins, or will i have to wait for qbkng77 to post his video on you tube on putting cwm recovery on fi27 rooted e4g touch? Thanks in advance for the help!
Sent from my SPH-D710 using xda app-developers app
n1stunna84 said:
Good evening all. I hope this is the right forum to post my question about recovery for my e4g touch. I recently rooted my phone and my phone is currently on the fi27 build. Is there a recovery i can put on there now to go ahead and start flashing ruins, or will i have to wait for qbkng77 to post his video on you tube on putting cwm recovery on fi27 rooted e4g touch? Thanks in advance for the help!
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I assume you do the same thing as I did. Get the EL26 kernel and flash it with Mobile Odin. I would wait on someone else to confirm that though.
Another really quick question. I want to overclock my phone. I tried using setcpu and the overclocker it came with. It only goes to a max of 1200 but I know it can go higher. I am guessing I need another kernel. What kernel can I use?
joshlete said:
Another really quick question. I want to overclock my phone. I tried using setcpu and the overclocker it came with. It only goes to a max of 1200 but I know it can go higher. I am guessing I need another kernel. What kernel can I use?
Click to expand...
Click to collapse
You either need a kernel with built in over clock support(you'd see the CPU slider go up to 1400-1600 automatically if it was). Or a kernel that supports over locking in tegrak, which you "load over clock module" with in tegrak.
Both Kuban kernel and some of Agats kernels have built in support, mine you need to use tegrak as I have not added built in yet
You can get them all in rwilco's (awesome) kernel repository stickied in development
Sent from my SPH-D710 using xda premium
Hey guys/gals,
I recently bought a Koodo Galaxy s2x. After a few weeks I looked online and saw that there were some JB Roms for my phone. I couldn't resist and tried to flash one after rooting. I didn't have many problems with it, but there were some glitches that started to bug me, so I decided to see about going back to stock (I should have done this first I know). So then after hours(many) of searching, the best I could find was a T-Mobile stock Rom I decided to try and flash it (both times via odin). I also read somewhere that I should use darkside superwipe to clear my cache, so I tried that, but ever since that CWM stopped working on my phone. anytime I tried to do any back up or anything it just froze, and I had to hard boot. Finally I just tried flashing T-Mobile stock ICS, and Odin said "Failed". I decided to just unplug my phone, as I thought I already screwed it up, but after rebooting, the T-mobile Rom worked. I don't understand why it works fine if the Flash Failed. Now, I can no longer connect to kies (I'm hoping official JB will be shipped soon!), and I am wondering if I can somehow return to a stock Koodo Rom, and if it will connect to Kies again, as it previously had. I have looked a lot and have not found anything that I fully understand. I'm not overly experienced, which is why I should not have flashed to begin with. This is the closest thread I have found to help me, but I don't fully understand what all I need to do:
"Haven't seen anyone shared this yet.
Here's the KOODO ICS 4.0.4 stock ROM I used CWM to flash to stock after I tried the custom ROM.
h t t p s : / / sourceforge.net/projects/koo...d.zip/download
I also flashed DARKSIDE.SUPER.WIDE before I flashed this or you can used CWM Recovery 6.0.1.2 to wipe system and cache."
Is it possible for me to get back to stock phone? and still connect to Kies? and then possibly upgrade to JB through Kies if Hercules ends up receiving it?
Thanks for any help you can give me. Here is all my current phone info incase this helps:
Model:
SGH-T989
Android Version:
4.0.3
Baseband version:
T989DTLLG2
Kernel version:
3.0.8-perf-T989UVLE1 -CL508451
[email protected] #1
SMP PREEMPT Sun May 6 15:07:07 KST 2012
Build number:
IML74K.UVLE1
Thanks.
If your ultimate goal is to get Jellybean on your phone, check the development section of this subforum. There are numerous stable and wonderful JB roms (AOKP Milestone 6, Liquid Smooth, CM10).
To get back to your stock ROM, download it from here: https://sourceforge.net/projects/koo...d.zip/download
Then, go into recovery (NOT odin), and flash the rom.
arcsine said:
If your ultimate goal is to get Jellybean on your phone, check the development section of this subforum. There are numerous stable and wonderful JB roms (AOKP Milestone 6, Liquid Smooth, CM10).
To get back to your stock ROM, download it from here: h t t p s ://sourceforge.net/projects/koo...d.zip/download
Then, go into recovery (NOT odin), and flash the rom.
Click to expand...
Click to collapse
That link doesn't work, it says cannot find page. Also, my phone is currently not rooted, does it have to be rooted to flash from recovery? if not what do I do to flash from recovery? I know how to get into recovery, but after that do I use 'apply update from external storage'? Do I have to wipe the cache first?
Thanks.
PS: I just want to be able to get back to stock for now. At least until I learn more about flashing Roms. There is still lots for me to learn, like kernels, radios, Nightly's for official Roms, or even how to properly flash a rom without feeling lost. If I know a way to get back to stock comfortably, It will give me more reason to try some other Roms (once I learn how).
Here is a working link to the stock Koodo ROM: http://sourceforge.net/projects/koodostock/files/KOODO_SGH-T989D_Stock_Signed.zip/download
Are you running a custom ROM right now or your stock ROM? If you're running a custom ROM, it should come with root privileges. If you are running the stock ROM, you can just back it up instead of needing to download the zip from sourceforge. This guide will help you get rooted: http://galaxys2root.com/t-mobile-galaxy-s2/how-to-root-icsgb-on-t-mobile-galaxy-s2-sgh-t989/. After rooting, get into recovery mode (if you can't get the button combinations to work, there is an app. called quick boot which reboots you into recovery/bootloader/etc). If you don't have a recovery or it's corrupt, download ROM manager from google play, and choose the 'install clockwork recovery'. Reboot to recovery to make sure it works, then uninstall rom manager (it's been known to cause bugs if you use it for other things - and I'd recommend other recoveries such as TWRP but it's a bit more advanced). From your recovery's screen, there should be a backup option. Make a complete backup and name it something appropriate. To flash a ROM, download it and put it on your storage drive. Reboot to recovery, and go to wipe. Wipe your data (factory reset), and system (only really need to wipe data in most cases, but be safe). To flash the custom ROM now (or flash the default ROM I just linked), there should be an option to 'install zip from sd card' or something similar. Choose that, browse to your ROM and install it. After installing, go to wipe and wipe your cache+dalvik cache, then reboot. There are several beginner guides sticked in the development forum, along with explanation of terms like radio/kernel/nightly/etc.
arcsine said:
Here is a working link to the stock Koodo ROM:
Are you running a custom ROM right now or your stock ROM? If you're running a custom ROM, it should come with root privileges. If you are running the stock ROM, you can just back it up instead of needing to download the zip from sourceforge. This guide will help you get rooted:. After rooting, get into recovery mode (if you can't get the button combinations to work, there is an app. called quick boot which reboots you into recovery/bootloader/etc). If you don't have a recovery or it's corrupt, download ROM manager from google play, and choose the 'install clockwork recovery'. Reboot to recovery to make sure it works, then uninstall rom manager (it's been known to cause bugs if you use it for other things - and I'd recommend other recoveries such as TWRP but it's a bit more advanced). From your recovery's screen, there should be a backup option. Make a complete backup and name it something appropriate. To flash a ROM, download it and put it on your storage drive. Reboot to recovery, and go to wipe. Wipe your data (factory reset), and system (only really need to wipe data in most cases, but be safe). To flash the custom ROM now (or flash the default ROM I just linked), there should be an option to 'install zip from sd card' or something similar. Choose that, browse to your ROM and install it. After installing, go to wipe and wipe your cache+dalvik cache, then reboot. There are several beginner guides sticked in the development forum, along with explanation of terms like radio/kernel/nightly/etc.
Click to expand...
Click to collapse
Thanks a ton... Worked perfectly! I'm hoping it will connect to Kies once again.. I'll let you know if it works.
Unfortunately, I still can't connect to Kies.. It just sits at the Loading status (for like 10-15 mins). But At least I don't have all of the T-mobile apps and stuff anymore!
I'm having issues flashing multiple roms of the 4.x.x Roms. The only rom so far I have been able to install and actually run on my phone is TweakWiz V2. I have tried many other roms and they just stay in a boot loop screen. Examples are with the Avatar rom it just stays on the mask an keeps going and going. I have tried CyanogenMod/Cyan Kang an it just stays on the Circle with the bar going around on the inside.
I am running the TWRP Touch Recovery. I also have the latest Radio update and everything else is updated on my phone.
I also let the install itself run for 10+ minutes everytime. But all the roms I try they keep doing the exact same thing and staying in a boot loop.
Can anyone give me any tips or suggestions to maybe something I could do to use another rom or maybe even a suggestion to something I may have overlooked.. Any help is appreciated. Thank you.
An if you need me to give any other information let me know an I will provide.
1. what recovery version not just the name ?? 2.steps you are doing to flash 3. steps you are doing after you flash
krazierokz said:
1. what recovery version not just the name ?? 2.steps you are doing to flash 3. steps you are doing after you flash
Click to expand...
Click to collapse
1.Im using the latest TWRP.
2. Wiping System, Cache, Dvalik or whatever. I wipe everything in the usual instructions. And I make a backup of previous ROM. Flash the ROM then the G-Apps.
3. After I flash I let the ROM run its course an I wait from 15-45 mins for the ROM to load if it doesnt I switch back to TweakWiz or try another.
Sent from my SAMSUNG-SGH-T989 using XDA Premium HD app
try using this recovery since the recovery you are using is the latest one and technically for 4.3 ROMs, give this a shot http://techerrata.com/file/twrp2/hercules/openrecovery-twrp-2.5.0.0-hercules.tar its the same recovery but lower . the steps you clarified seem very proper but your recovery may be at fault crossing fingers try flashing that recovery through odin or download the zip from the same website and report back after trying to flash again
Are you sure you are wiping DATA also?
You will need to do this, if you are flashing a 4.2 or 4.3 ROM, then you will also want to wipe the pre-load. Then flash the rom, and gapps.
Use the newest TWRP 2.6.1.0 to flash anything, don't need an older recovery to flash older ROM's.
idtheftvictim said:
Are you sure you are wiping DATA also?
You will need to do this, if you are flashing a 4.2 or 4.3 ROM, then you will also want to wipe the pre-load. Then flash the rom, and gapps.
Use the newest TWRP 2.6.1.0 to flash anything, don't need an older recovery to flash older ROM's.
Click to expand...
Click to collapse
Is there a option I'm not deleting ?
Because I've been flashing ROMS on different phones an I have never had any issues before. I was using ICS an GB etc before an just recently decided to upgrade an use the JB (I think that's the name.) on my phone.