Develop Bugs

Need help flashing recovery.

Hi people.
I got some problems and some questions.
Until now I was perfectly happy with CWM 2.5.0.1 Recovery, BUT, I found out about newer recoveryes, so I decided to flash one.
NOW!
I'm VERY pissed off because I can't flash it.
I tried unrEVOked method, won't work, it pushes recovery but gets stuck on WAITING FOR BOOTLOADER; MAKE SURE ALL DRIVERS ARE INSTALLED. And yes, I have all drivers installed (ones that came with HTC Sync and Android 1.0 usb driver) and I tried with unrEVOked 3.14 and with the latest unrEVOked. So, thats all about that method and we can see it DOESN'T work.
Off to the next one:
I tried flashing the image with terminal emulator. Once again I did all the steps good: Copied the recovery.img to the root of SD card, entered t.e. and wrote the command (su to get superuser access and then flash_image recovery /sdcard/recovery.img).
Once again, NOTHING.
Then I tried using ROM manager from CWM. It flashes a recovery but I can only access that recovery through ROM manager but not through bootloader, that one gets me back to 2.5.0.1.
So I would REALLY appreciate if I can get some help.
Thanks in advance.
Regards from pissed off and unhappy me.

1st of buddy , your Question should be posted in the Q|A Section
2nd , did you try to re-install your phone drivers ?

k0sh,
1) whatever, mod can transfer it there, i just want some help.
2) yes.

smokzye said:
k0sh,
1) whatever, mod can transfer it there, i just want some help.
2) yes.
Click to expand...
Click to collapse
buddy , though you are my friend , but maybe you need to re-write your last comment specially number 1) .. its really not good though
regarding 2) what you wrote exactly in terminal ?
only 1 line ?

Seriously mate, just install Android SDK, and use the Fastboot option. Easy as pie and no issues at all.
Install Android SDK, then, get the Recovery.IMG file of the Clockworkmod version you want to flash. Place this in the SDK's Tools folder. Then, reboot your Wildfire in the bootloader mode, Enter Fastboot mode (Press Power button on Fastboot).
Then, open Command Prompt on Windows, cd (browse) to the SDK's tools folder and type the following command:
fastboot flash recovery recovery.img
Done.
Screenshot here (My SDK is installed in D:\Android)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AFAIK, You dont even need SDK installed. Just the Fastboot and binary will do, which can be obtained here: (Still, not very sure of this process, as I had the SDK installed a long time back)
http://forum.xda-developers.com/showthread.php?p=14693680

enough of number 1. :S
now
first line
su (ENTER)
by that i get superuser access
then in second line
flash_image recovery /sdcard/recovery.img (ENTER)
so now i get
operation done in next line
but phone should first: freeze for a bit
then get an empty line
nothing happens to me tho, and i tried to reboot in recovery coz i thought maybe it was a success, nope. same old stuff

3xeno said:
Seriously mate, just install Android SDK, and use the Fastboot option. Easy as pie and no issues at all.
Install Android SDK, then, get the Recovery.IMG file of the Clockworkmod version you want to flash. Place this in the SDK's Tools folder. Then, reboot your Wildfire in the bootloader mode, Enter Fastboot mode (Press Power button on Fastboot).
Then, open Command Prompt on Windows, cd (browse) to the SDK's tools folder and type the following command:
fastboot flash recovery recovery.img
Done.
Screenshot here (My SDK is installed in D:\Android)
AFAIK, You dont even need SDK installed. Just the Fastboot and binary will do, which can be obtained here: (Still, not very sure of this process, as I had the SDK installed a long time back)
http://forum.xda-developers.com/showthread.php?p=14693680
Click to expand...
Click to collapse
Thanks 3xeno. ^^

3xeno said:
Seriously mate, just install Android SDK, and use the Fastboot option. Easy as pie and no issues at all.
Install Android SDK, then, get the Recovery.IMG file of the Clockworkmod version you want to flash. Place this in the SDK's Tools folder. Then, reboot your Wildfire in the bootloader mode, Enter Fastboot mode (Press Power button on Fastboot).
Then, open Command Prompt on Windows, cd (browse) to the SDK's tools folder and type the following command:
fastboot flash recovery recovery.img
Done.
Screenshot here (My SDK is installed in D:\Android)
AFAIK, You dont even need SDK installed. Just the Fastboot and binary will do, which can be obtained here: (Still, not very sure of this process, as I had the SDK installed a long time back)
http://forum.xda-developers.com/showthread.php?p=14693680
Click to expand...
Click to collapse
please help!!! android SDK says (waiting for device) when my tattoo is in fastboot usb mode. it finds my device when my tattoo is on.

I've the same problem... If you have another way to flash recovery depends on S-ON/S-OFF stuff. Take a look at this thread the part 6: Custom Recoveries
If your buzz is S-ON (like mine) there isn't any other way but unrevoked but it doesn't seem to work, at least if your phone is already rooted

u do have all your windows drivers setup, do u?

glida said:
please help!!! android SDK says (waiting for device) when my tattoo is in fastboot usb mode. it finds my device when my tattoo is on.
Click to expand...
Click to collapse
Don't flash a buzz recovery for a tattoo... you will brick your phone

Bricked or not?

http://imageshack.us/photo/my-images/717/img0102045900.jpg/ like this photo
can't recovery mode
;'(

details please.

rootSU said:
details please.
Click to expand...
Click to collapse
can't get into recovery mode.
when switch on the power button or power+vol down
it goes like this.
send to HTC service???

These are the details we need:
1) Rooted / s-off?
2) What was the last thing that happened before it stopped working?
3) What android version / ROM is being used?
4) Does Hboot (Vol down+power) or fastboot (Back+power) Work when your phone is off?

rootSU said:
These are the details we need:
1) Rooted / s-off?
2) What was the last thing that happened before it stopped working?
3) What android version / ROM is being used?
4) Does Hboot (Vol down+power) or fastboot (Back+power) Work when your phone is off?
Click to expand...
Click to collapse
-Rooted(yes) / S-off(yes)
-the last thing is i wanna flash radio (i think i do it wrong way)
-AlphaRev CM7 r2
Bravo pvt1 Ship S-off
Hboot-6.93.1002
mrcrop-031d
touch panel-synw0101
radio-5.09.05.30_2
-Hboot and fastboot can't!

Did you actually flash a radio? If so, which one? How did you do it? Fastboot?
Can you hboot / fastboot after battery pull? Remove battery 5 minutes then try again?

rootSU said:
Did you actually flash a radio? If so, which one? How did you do it? Fastboot?
Can you hboot / fastboot after battery pull? Remove battery 5 minutes then try again?
Click to expand...
Click to collapse
i tried the latest with fastboot.
removed but can't

Does it go straight to the HTC screen when you try to get into fastboot?
If so, when you try to get into fastboot and HTC screen comes up, please connect to PC and run
Code:
fastboot devices
And let me know if your device is picked up...

now if i plug the usb it shows the same black screen with HTC logo
but if i unplug it shows
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
like this
a orange hilight "RUU"
what i gonna do next??
ps. now i change to CWM recovery v2.5.1.3 because 4EXTrecovery is not working.
and when i jsut install zip from sdcard,it shows E:can't mount /dev/block/mmcblk0p1 (or/dev/block/mmcblk0)
(No such file or directory)
E:can't mount/sdcard

I need the output from "fastboot devices" please.
...and please stop doing stuff or you will break it further

rootSU said:
I need the output from "fastboot devices" please.
...and please stop doing stuff or you will break it further
Click to expand...
Click to collapse
my phone can't connect to fastboot and hboot.
when i run cmd. it shows
"C:\AndroidSDK\tools>fastboot devices
'fastboot' is not recognized as an internal or external command,
operable program or batch file.
sorry if i don't know anythings i'm new.
C:\AndroidSDK\tools>"

read the adb and fastboot FAQ in my signature. It will tell you how to set up. Download my files from there and do what it says in the read me file to set up.
Do not bother reading adb stuff, not relevant

rootSU said:
read the adb and fastboot FAQ in my signature. It will tell you how to set up. Download my files from there and do what it says in the read me file to set up.
Do not bother reading adb stuff, not relevant
Click to expand...
Click to collapse
i'm reading &trying
thanks and i'll tell the result.

also fix is on my guide. It's nothing major

finished your step: adb, hboot(Android Bootlaoder Interface)
but when i typed "adb shell" it shows "error device not found".
Is it because i'm not in Hboot screen? (when pluged usb my phone screen shows black screen with HTC logo.
need more advise please
now can use fastboot!!!!!
what to do next!

chavab said:
finished your step: adb, hboot(Android Bootlaoder Interface)
but when i typed "adb shell" it shows "error device not found".
Is it because i'm not in Hboot screen? (when pluged usb my phone screen shows black screen with HTC logo.
need more advise please
Click to expand...
Click to collapse
Errr......................
rootSU said:
Do not bother reading adb stuff, not relevant
Click to expand...
Click to collapse

rootSU said:
Errr......................
Click to expand...
Click to collapse
now it can read sdcard , also fastboot can use

Ok so now you need to fastboot flash hboot downgrade.img from alpharev website. Then in fastboot again, you can RUU
Sent from my HTC Desire using xda premium

rootSU said:
Ok so now you need to fastboot flash hboot downgrade.img from alpharev website. Then in fastboot again, you can RUU
Sent from my HTC Desire using xda premium
Click to expand...
Click to collapse
after i downgrade so can i flash this rom? (sebastian15)
i don't know what's RUU?
ps. when i run fastboot my phone isn't in fastboot screen it's on black screen with HTC logo.

hey, yesterday i had same problem. just wanted to go to stock rom and i stucked on same screen. and windows didn't see my sd card. so what i did:
booted to linux ubuntu, somehow linux saw my sd card, with gparted i deleted all partitions and reformated sd card. when i downloaded android flasher 2.2 i gues and flashed original bootloader from alpharev.nl, and flashed rocovery img. when i started official ruu 2.3 and everything went fine. now i am on original rom and have working phone . but i think that main problem was cm7r2 hboot. so i think you just need to flash original hboot and run ruu rom. ruu rom you can get from second or third thread in development section. good luck.

[SOLVED]USB BRICKED+SDCARDnot Recognize+Heavy Battery Drain

To all Who are experiencing the problem I faced...Illustrated HERE..
And this is What I've Triedhttp://forum.xda-developers.com/showpost.php?p=19562122&postcount=8 to solve until got a FIX
I am writing this because I am getting PMs for help..and For the future Problems..
A Big Thanks to ckpv5... He helped me through out the days...
The Phone must be S-OFF and must got ROOT access to use this
Here is the Solution .. ..
After this you will have SD-CARD RECOGNIZED+NO BATTERY DRAIN..EVEN BETTER BATTERY BACKUP See my screen Shots
STILL GOT PROBLEM UNSOLVED ..PM me I'll TRY TO SOLVE
SOLUTION
1. First of ALL..do install ADB in you PC and on your Device(If it is bricked.. don’t worry it has adb shel on this already) see help from here http://forum.xda-developers.com/showthread.php?t=690362
Note these commands carefully ..and save these as txt in PC for further help
adb devices
fastboot flash recovery recovery.img
fastboot reboot-bootloader
fastboot erase cache
2. Download these(http://www.multiupload.com/5ZAPJTFXMM) and put them into C drive after UNZIPING by 7ZIP...
3. Put a recovery.img named file of AMON RA recovery.. download from here(http://files.androidspin.com/downloads.php?dir=amon_ra/RECOVERY/&file=recovery-RA-desire-v2.0.0.img)
4. Reboot your phone in BOOTLOADER ...Power on by pressing FIRST BACK BUTTON and than POWER simultaneously..
5. Open Command Prompt in PC.. for Windows7 type cmd in search at START button... for XP type run at START search..
6. Go to the directory in cmd prompt....as...
“cd C:\android sdk\tools”
7. Type
“adb devices” Let it load
“adb shel” Let it load
“fastboot erase cache”
“fastboot reboot-bootloader”
“fastbooot oem enableqxdm 0”
“fastbooot oem eraseconfig”
“fastboot erase cache”
“fastboot reboot-bootloader”
NOTE: Do remember to do all above command together and by sequence only...
8. Now it is time to flash the recovery..
9. Rename the download recovery image as “recovery”
10. Put this img file in to “C\android sdk\tools” folder
11. Open command prompt again..
12. Type
“adb devices” Let it load
“adb shel” Let it load
“fastboot erase cache”
“fastboot reboot-bootloader”
“fastboot flash recovery recovery.img”
“fastboot erase cache”
“fastboot reboot-bootloader”
13. Now remove the SD card from the phone and connect it to PC via card reader or anything by which u can easily connect..
14. Put the ROM.zip in the SD card
15. Put the SD card back in the Phone..
16. PowerOn the phone in fastboot mode by pressing VOLUMEDOWN first and than POWER simultaneously..
17. Use volume keys to go up and down..and power to select
18. Go to recovey and press power button..
19. In recovery just go to the WIPE.. and do WIPE of cache..dalvik cache..boot..system...sd-ext...Battery Stats..
20. Now reboot recovery..
21. Now after coming back to recovery in Phone choose INSTALL ZIP FROM SD CARD..
22. Simply choose the ROM.zip file...
23. Let it Flash
24. Wait
25. And
26. ENJOY!!!!!
The PROBLEM IS NO MORE..
Your phone will RECOGNIZE the SD card..
The Battery Drain (Usually having 1% under a minute) Will be Gone
You can use FAstBoot Commander or Android Flasher also to Flash Recoveries or hboots and Bootloaders
SEE SCREENSHOTS HERE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hey, Think I have the battery drain problem with runnymede AIO Rom, was it flashing AMON RA recovery that solved it? or the whole process? I don't have an SD problem.

jacksonliam said:
Hey, Think I have the battery drain problem with runnymede AIO Rom, was it flashing AMON RA recovery that solved it? or the whole process? I don't have an SD problem.
Click to expand...
Click to collapse
for the battery Drain problem.. you can do following things..
1. Wipe Battery stats
2. Install snq kernel
3. If above two doesn't work than only... try the two "oem commands" as I writtten in the procedure..
Actually every time you flash a ROm or everytime deleting and using the phone.. a extra data related to everything as cache configuration is stored in the MEMORY which acually u can not see but it eats battery...
The oem commandsd erases that thing and after this..it is like a new memory having completely blank..
BUT AFTER DOING THIS YOU WILL NOT BE ABLE TO RECOVER ANY DATA ON PHONE MEMORY IF ACCIDENTLY DELETED..
you will need to flash a new Inatall of same ROM..or whichever you want...

YES! You saved my sanity AND my phone! many many thanks!

Matty Matt said:
YES! You saved my sanity AND my phone! many many thanks!
Click to expand...
Click to collapse
.. Happy to help

I am a bit lost...
ADB cannot be used when the phone is in bootloader. So after the instruction to put the phone in to bootloader the proceeding instructions which say:
type adb devices [enter]
type adb shel [enter]
won't achieve anything. In other words, adb devices (whilst the device is in bootloader) will not find any attached devices.
adb "shel" isn't a valid command. Do you mean adb "shell" ? If so, this too isn't going to work while the device is in bootloader, adb will simply reply with "error: device not found".
So I guess what I'm trying to ask is - what is the point of those typing those two commands? In this instance, they don't serve any purpose and can be omitted?

sachin.02 said:
The oem commandsd erases that thing and after this..it is like a new memory having completely blank..
BUT AFTER DOING THIS YOU WILL NOT BE ABLE TO RECOVER ANY DATA ON PHONE MEMORY IF ACCIDENTLY DELETED..
you will need to flash a new Inatall of same ROM..or whichever you want...
Click to expand...
Click to collapse
I just can't understand what do you mean....
How am i supposed to recover any accidently deleted files if i didn't run those commands??????

dlotters said:
I am a bit lost...
ADB cannot be used when the phone is in bootloader. So after the instruction to put the phone in to bootloader the proceeding instructions which say:
type adb devices [enter]
type adb shel [enter]
won't achieve anything. In other words, adb devices (whilst the device is in bootloader) will not find any attached devices.
adb "shel" isn't a valid command. Do you mean adb "shell" ? If so, this too isn't going to work while the device is in bootloader, adb will simply reply with "error: device not found".
So I guess what I'm trying to ask is - what is the point of those typing those two commands? In this instance, they don't serve any purpose and can be omitted?
Click to expand...
Click to collapse
everything is written clearly...
these two commands repairs the USB brick also improves battery life and gives exact information about battery uses.. you will see this after flashing a ROM..
adb shel is correct command..it open the list of commands and details of phone...
Tell me what you need.. than i may solve the problem..

spitjo said:
I just can't understand what do you mean....
How am i supposed to recover any accidently deleted files if i didn't run those commands??????
Click to expand...
Click to collapse
by saying not able to recover any data is just.. if you are using any recover data application from market to recover anything which have been lost by mistake.. than you won't be able to..
BTW this Problem rarely occurs...

I' ve done this as you said in your 1st post but still Display uses more than 60% of battery use (i set brightness to minimum, all is set up to minimum and power saving)
I'm running AIO 3.0.5. CM7r2 hboot, XD2SDX, desire is s-lcd version

kciko said:
I' ve done this as you said in your 1st post but still Display uses more than 60% of battery use (i set brightness to minimum, all is set up to minimum and power saving)
I'm running AIO 3.0.5. CM7r2 hboot, XD2SDX, desire is s-lcd version
Click to expand...
Click to collapse
Calibrate tour battery... It happens that the software doesn't shows exact informations...
The problem is also with guys at cynogen too...
It is normal...
The thing is..after doing this tutorial you must be getting 16 hours battery life as normal use....
Don't worry about display...
Sent from my HTC Runnymede using Tapatalk

is it just me? having problem make adb detect my phone.

napalm.potter said:
is it just me? having problem make adb detect my phone.
Click to expand...
Click to collapse
Have you Downloaded the Tools from the link I've provided

If you have 4ext recovery boot into it and go to tools - usb unbrick. It works for me fine.
Sent from my HTC Desire using XDA App

HTC one x stock in bootloop

First of all I did some research on Xda regarding my issue, the issue is my phone keeps on bootlooping it did this first time during the night while the phone was sleeping and then it did it today while I was on Xda developer it just froze. I don't know anything about if my bootloader is locked but it isn't rooted with s-on and fully stock. I can go to the recovery using power and vol down, but it doesn't have any affect I tried erasing the data but it just goes back in to a bootloop. I have been reading this threat http://forum.xda-developers.com/showthread.php?t=2020931
"Relock your bootloader using the commend 'fastboot oem lock'.
Go into fastboot mode and type 'fastboot oem rebootRUU'.
Flash the new firmware using the commend 'fastboot flash zip firmware.zip'.
On first time running the commend you will see FAILED, don't panic and just run the commend again.
Reunlock your bootloader via HTCDev.
Flash custom recovery using the commend 'fastboot flash recovery recovery.img'.
Download boot.img and flash it using the commend ‘fastboot flash boot boot.img’.
Use the commend 'fastboot erase cache' to avoid boot issues.
Go into recovery and install the ROM.
Reboot your device and enjoy from JB!"
I have some questions regarding this threat one of the members mentioned some steps like locking the bootloader then unlocking it. I have visited the HTC dev website and I'm finding it hard to figure how to use command prop. If I save the files to the c drive how do I locate it using cammand prop C:// (is this right?). If I connect my phone to the computer and I download the content that the member had mentioned (boot img and new firmware) where do I place these files, on the root of the sd on the phone? I can't possibly do that because after jb hox it cannot go to usb mount without root. I have two hox's one updated fine and is stock the other has been behaving funny. The phone did go into a bootloop previously but after the battery died I tired the phone on and it was working fine till one day later. The first issue I had was it was stuck on HTC boot screen then I turned it of and now it's stuck in bootloop. The only thing that I can figure out is keep it in recovery and allow the battery to die recharge it and factory reset it if it boots successfully.
Any help will be very appriciated
Sent from my HTC One X using xda app-developers app

Hold the power Button and the volume down button pressed together and hold them both down until the phone restarted and has entered the bootloader
Info is there ....
If its locked or unlocked, Hboot number...etc etc
Tell us what it says there ?

***LOCKED***
Endeavoru pvt ship s-on rl
Hboot-1.39.0000
Cpld-none
Microp-none
Radio-5.1204.162.29
Emmc-bootmode: disabled
CPU-bootmode: disabled
HW secure path: enabled
Modem path : off
I hope this helped
Sent from my HTC One X using xda app-developers app

I just turned the phone on after I drained the battery leaving it on recovery mode and it has successfully booted but it did this before after the battery died when it went into its first bootloop during two nights ago. I know that this is only a temporary fix I feel there is something wrong with the battery or something related to that although it had more than 30% when I upgraded to jb although it was charging while updating.
Edit: I just put the phone into recovery and selected recovery it went to a screen with a phone and a bar underneath and then it rebooted asking me to go through the beginner tutorial. I don't know if the issue has been fixed yet.
Sent from my HTC One X using xda app-developers app

Don't know for sure, but don't go unlocking the bootloader and flashing stuff. The bootloader is LOCKED. you have full warranty with that

Is the jb ruu available so I can re flash it, also can I not clear the cache using command prop what are my options? I'd the jb ruu os not avalible if I flash the ics ruu can I still recieve the ota of jb.
Sent from my HTC One X using xda app-developers app

No you cant flash the ics ruu because we can not downgrade the hboot. Give me your main version and see if i can hook you up with a ruu !
Fastboot getvar version-main
You tried a factory reset from the bootloader menu ?
And you can enter the recovery when you see that phone with the bar, just press volume down and power button. You see the phone with the bar because its the stock recovery

How do find out the main version? Yes I will try to factory reset through recovery.
Sent from my HTC One X using xda app-developers app

You put the phone in the bootloader and press hboot one time , it should say
Fastboot usb in red text
Then open a command prompt inside the fastboot folder and type
Fastboot getvar version-main

I went to recovery and connected a usb to the phone I clicked fastboot and above the hboot the fastboot usb was highlighted in red I clicked hboot and it went back to the main menu so I did it again without clicking hboot ans I opened command prop and it said C> so I typed fastboot getvar version-main it said fastboot wa not recognised I think I didn't type it properly can you help me.
The phone is now booting up but it keeps on saying sense crash then it freezes. It doesn't bootloop any more it just messes up.
Sent from my HTC One X using xda app-developers app

Install these drivers
http://db.tt/gXVxa3Dp
Put these files in a folder where you can find them, open a command there and perform it again.
And leave the screen on in the bootloader where it says fastboot usb !
http://db.tt/ldx3qOOU

Ok so i had the same issue when i first tried to flash the new firmware on my htc one x
i was in bootloop for hours and didnt know what was going on
what fixed it for me was flashing the boot.img from the rom i had downloaded
try flashing the boot.img included in your rom it should be in the .zip file of the rom
after that i didnt experience any bootloops
Edit: i see you have problems with fastboot you first need to change to the directory where the fastboot files are stored
so you need to use the command cd to change to the directory(folder) of the fastboot files
for example my command would be cd C:\Users\Nimbs\Desktop\HTC ONE X fastboot folder

Nimbs said:
Ok so i had the same issue when i first tried to flash the new firmware on my htc one x
i was in bootloop for hours and didnt know what was going on
what fixed it for me was flashing the boot.img from the rom i had downloaded
try flashing the boot.img included in your rom it should be in the .zip file of the rom
after that i didnt experience any bootloops
Edit: i see you have problems with fastboot you first need to change to the directory where the fastboot files are stored
so you need to use the command cd to change to the directory(folder) of the fastboot files
for example my command would be cd C:\Users\Nimbs\Desktop\HTC ONE X fastboot folder
Click to expand...
Click to collapse
You clearly did not read ! He is already on the 1.39 hboot he does NOT have to flash a firmware, the bootloader is LOCKED so he has warranty ! The phone is 100% STOCK !!! He only wants to run a RUU to check if the problems are going away ! And the only option is a RUU because unlocking the bootloader in this case will void the warranty he still has ! .........
And please don't flash just the firmware, its actually non official released stuff !!!
And you also did not read my post, you are giving incorrect advice and posting the same info i already did. Please read the next time

I charged the phone then I connected it to the computer placed in recovery with it saying fastboot usb in red. I placed the four Dropbox files in my documents in a file called HTC driver. Then I opened command prop and it said C> then I typed /My documents/htc driver folder/fastboot getvar version-main and then I selected enter and it said my isn't recognised so I then placed user before it and it said user isn't rocognised so then I placed the user name and it said xyz not recognised. I don't know how to locate the files using command prop I placed all the files I downloaded in one file. I can't seem to understand how to use the directory sorry for being such a beginner at this I'm just not used to this. The last time I messed with a ruu and custom roms was when I had htc desire hd.
Sent from my HTC One X using xda app-developers app

Put the files in a new FOLDER , not in a FILE ....
navigate to that folder in windows and press shift and right click inside that folder ....then you execute the command on the doscommand window that you just opened

Sorry for the mistype I placed it in a folder. So basically I open command then using windows explorer I press shift and right click to exacute the command okay.
Sent from my HTC One X using xda app-developers app

No you use the windows explorer to navigate to the folder then you do the shift + right click and then you type the command in the dos window

First of all I cannot run command the through shift+right click. I did download a add on from Microsoft that allows this functionality but thier was a issue. The only way I can locate the file is through command prop but it almost seems impossible to use. I don't know what to do I think I'm out of luck, all I can do is throw it back at htcs face for replacement. I tried to learn how to use command prop and but I haven't succeeded.
Sent from my HTC One X using xda app-developers app

I THINK I DID IT.
Version main 3.14.401.31
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Check the image is this right? Can you now help me find the right ruu pretty please
I just did some searching and I think it's this ruu since my phone isn't carrier branded and I'm in the UK: RUU_ENDEAVOR_U_ICS_40_HTC_Europe_1.29.401.11_Radio_1.1204.105.14_release_260491_signed.exe
Sent from my HTC One X using xda app-developers app

No you can not use that one, you need the 3.14.401.31 i can't share it at the moment !
Maybe you can still get it here ..... if you are fast enough !!!
http://www.shipped-roms.com/index.php?category=android&model=Endeavor

[Q] [q] Failed RUU - black screen with /!\ issue

Dear All,
I am digging through the forum for couple of hours but after reading number of tutorials and threads I stuck with no answer to my problem.
Here is the issue:
I have HTC Desire (Bravo) PVT3 with S-Off and Alpha Rev CM7 r2.
I Tried to Flash original ROM RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed. The process failed and I have ended up with black screen and /!\ in every corner. I tried to solve the problem with with THIS tutorial (POINT 4) but I did not succeed.
I cannot flash Bravo Stock with Android Flasher (version 2.0.0) as it freezes. Links to newer version of the flasher seems to be dead - so are links to number of other utilities on the forum .
Could anyone help me bring the phone to life, please? I probably (!) even have got a goldcard (it was created long time ago, never used even not sure if it was ever working). I want to flash any rom to make the phone usable, not necessarily stock one.
After unplugging usb from the PC, the phone is in ruu mode and displays following info:
Alpha Rev CM7 r2
Bravo PVT3 Ship S-OFF
HBOOT-6. 93. 1002
Microp-051d
Touch Panel -SYNW0101
Radio-4. 06. 00. 02_2
Date, time
Many thanks for any ideas....

mk400 said:
I cannot flash Bravo Stock with Android Flasher (version 2.0.0) as it freezes.
Click to expand...
Click to collapse
I assume that you're after reading HTC Desire (Bravo) Troubleshooting Guide, Chapter [4]: RUU PROBLEMS.
Try another flasher, e.g. Universal Android Flasher v1.40 b.

Just use fastboot commands to flash stock hboot then run the ruu.
The command is -
fastboot flash hboot bravo_alphaspl.img
The reason the ruu failed is because the system partition in the cm7r2 hboot is too small for the ruu.

ze7zez said:
Try another flasher, e.g. Universal Android Flasher v1.40 b.
Click to expand...
Click to collapse
I have read the tutorial. I am trying to flash "bravo_alphaspl.img" with BOOT option of Universal Android Flasher v1.40 but it doesn't work. -FAILED (remote: image error! (BootMagic check fail))
finished. total time: 0.089s
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

jmcclue said:
Just use fastboot commands to flash stock hboot then run the ruu.
The command is -
Click to expand...
Click to collapse
How to do it ???

mk400 said:
How to do it ???
Click to expand...
Click to collapse
In the same way that you read in bortak's quide.
First you need to be sure that you have the IMG for hboot and that through adb you have connection to the device.

ze7zez said:
In the same way that you read in bortak's quide.
First you need to be sure that you have the IMG for hboot and that through adb you have connection to the device.
Click to expand...
Click to collapse
OK, I have downloaded "Bravo Stock" from Alpharev but I cannot boot to fastbood mode (back and power don't work).
How to check adb connection or how to establish it? While trying to flash with adb flasher from the tool you have provided there is error: phone not found

mk400 said:
OK, I have downloaded "Bravo Stock" from Alpharev but I cannot boot to fastbood mode (back and power don't work).
How to check adb connection or how to establish it? While trying to flash with adb flasher from the tool you have provided there is error: phone not found
Click to expand...
Click to collapse
Pull the battery out then put back in, then press and hold back + power Or vol down + power. /!\ in each corner is the same as fastboot mode. So when u get that screen, plug in ur phone and type the fastboot command
fastboot flash hboot bravo_alphaspl.img
Then type
fastboot reboot-bootloader
Then run the ruu.

jmcclue said:
Pull the battery out then put back in, then press and hold back + power Or vol down + power. /!\ in each corner is the same as fastboot mode. So when u get that screen, plug in ur phone and type the fastboot command
fastboot flash hboot bravo_alphaspl.img
Then type
fastboot reboot-bootloader
Then run the ruu.
Click to expand...
Click to collapse
It seems I don't have adb connection.
I installed new Android SDk Tools as is in here [Tutorial] How to install Android SDK tool & HTC's drivers [BEGINNERS FRIENDLY], new HTC drivers "HTCDriver_4.2.0.001.exe" from [DRIVERS] Latest HTC Drivers [4.2.0.001] and Java.
When I type in command line adb devices there is none listed. When I try adb reboot command it says no device connected. Phone is in fastboot mode (black htc screen with /!\ in corners)

mk400 said:
It seems I don't have adb connection.
I installed new Android SDk Tools as is in here [Tutorial] How to install Android SDK tool & HTC's drivers [BEGINNERS FRIENDLY], new HTC drivers "HTCDriver_4.2.0.001.exe" from [DRIVERS] Latest HTC Drivers [4.2.0.001] and Java.
When I type in command line adb devices there is none listed. When I try adb reboot command it says no device connected. Phone is in fastboot mode (black htc screen with /!\ in corners)
Click to expand...
Click to collapse
OK, It works! Sorry. I loaded hboot image. Many thanks for all of you!
Two more questions: in case I load stock RUU will I S-ON the phone? Can I load now any other rom (aplplicabe for stock hboot) using fastboot and how? Or should I better load ruu and than try to load rom from .zip file using bootloader?