[SOLVED]USB BRICKED+SDCARDnot Recognize+Heavy Battery Drain - Desire General

To all Who are experiencing the problem I faced...Illustrated HERE..
And this is What I've Triedhttp://forum.xda-developers.com/showpost.php?p=19562122&postcount=8 to solve until got a FIX
I am writing this because I am getting PMs for help..and For the future Problems..
A Big Thanks to ckpv5... He helped me through out the days...
The Phone must be S-OFF and must got ROOT access to use this
Here is the Solution .. ..
After this you will have SD-CARD RECOGNIZED+NO BATTERY DRAIN..EVEN BETTER BATTERY BACKUP See my screen Shots
STILL GOT PROBLEM UNSOLVED ..PM me I'll TRY TO SOLVE
SOLUTION
1. First of ALL..do install ADB in you PC and on your Device(If it is bricked.. don’t worry it has adb shel on this already) see help from here http://forum.xda-developers.com/showthread.php?t=690362
Note these commands carefully ..and save these as txt in PC for further help
adb devices
fastboot flash recovery recovery.img
fastboot reboot-bootloader
fastboot erase cache
2. Download these(http://www.multiupload.com/5ZAPJTFXMM) and put them into C drive after UNZIPING by 7ZIP...
3. Put a recovery.img named file of AMON RA recovery.. download from here(http://files.androidspin.com/downloads.php?dir=amon_ra/RECOVERY/&file=recovery-RA-desire-v2.0.0.img)
4. Reboot your phone in BOOTLOADER ...Power on by pressing FIRST BACK BUTTON and than POWER simultaneously..
5. Open Command Prompt in PC.. for Windows7 type cmd in search at START button... for XP type run at START search..
6. Go to the directory in cmd prompt....as...
“cd C:\android sdk\tools”
7. Type
“adb devices” Let it load
“adb shel” Let it load
“fastboot erase cache”
“fastboot reboot-bootloader”
“fastbooot oem enableqxdm 0”
“fastbooot oem eraseconfig”
“fastboot erase cache”
“fastboot reboot-bootloader”
NOTE: Do remember to do all above command together and by sequence only...
8. Now it is time to flash the recovery..
9. Rename the download recovery image as “recovery”
10. Put this img file in to “C\android sdk\tools” folder
11. Open command prompt again..
12. Type
“adb devices” Let it load
“adb shel” Let it load
“fastboot erase cache”
“fastboot reboot-bootloader”
“fastboot flash recovery recovery.img”
“fastboot erase cache”
“fastboot reboot-bootloader”
13. Now remove the SD card from the phone and connect it to PC via card reader or anything by which u can easily connect..
14. Put the ROM.zip in the SD card
15. Put the SD card back in the Phone..
16. PowerOn the phone in fastboot mode by pressing VOLUMEDOWN first and than POWER simultaneously..
17. Use volume keys to go up and down..and power to select
18. Go to recovey and press power button..
19. In recovery just go to the WIPE.. and do WIPE of cache..dalvik cache..boot..system...sd-ext...Battery Stats..
20. Now reboot recovery..
21. Now after coming back to recovery in Phone choose INSTALL ZIP FROM SD CARD..
22. Simply choose the ROM.zip file...
23. Let it Flash
24. Wait
25. And
26. ENJOY!!!!!
The PROBLEM IS NO MORE..
Your phone will RECOGNIZE the SD card..
The Battery Drain (Usually having 1% under a minute) Will be Gone
You can use FAstBoot Commander or Android Flasher also to Flash Recoveries or hboots and Bootloaders
SEE SCREENSHOTS HERE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hey, Think I have the battery drain problem with runnymede AIO Rom, was it flashing AMON RA recovery that solved it? or the whole process? I don't have an SD problem.

jacksonliam said:
Hey, Think I have the battery drain problem with runnymede AIO Rom, was it flashing AMON RA recovery that solved it? or the whole process? I don't have an SD problem.
Click to expand...
Click to collapse
for the battery Drain problem.. you can do following things..
1. Wipe Battery stats
2. Install snq kernel
3. If above two doesn't work than only... try the two "oem commands" as I writtten in the procedure..
Actually every time you flash a ROm or everytime deleting and using the phone.. a extra data related to everything as cache configuration is stored in the MEMORY which acually u can not see but it eats battery...
The oem commandsd erases that thing and after this..it is like a new memory having completely blank..
BUT AFTER DOING THIS YOU WILL NOT BE ABLE TO RECOVER ANY DATA ON PHONE MEMORY IF ACCIDENTLY DELETED..
you will need to flash a new Inatall of same ROM..or whichever you want...

YES! You saved my sanity AND my phone! many many thanks!

Matty Matt said:
YES! You saved my sanity AND my phone! many many thanks!
Click to expand...
Click to collapse
.. Happy to help

I am a bit lost...
ADB cannot be used when the phone is in bootloader. So after the instruction to put the phone in to bootloader the proceeding instructions which say:
type adb devices [enter]
type adb shel [enter]
won't achieve anything. In other words, adb devices (whilst the device is in bootloader) will not find any attached devices.
adb "shel" isn't a valid command. Do you mean adb "shell" ? If so, this too isn't going to work while the device is in bootloader, adb will simply reply with "error: device not found".
So I guess what I'm trying to ask is - what is the point of those typing those two commands? In this instance, they don't serve any purpose and can be omitted?

sachin.02 said:
The oem commandsd erases that thing and after this..it is like a new memory having completely blank..
BUT AFTER DOING THIS YOU WILL NOT BE ABLE TO RECOVER ANY DATA ON PHONE MEMORY IF ACCIDENTLY DELETED..
you will need to flash a new Inatall of same ROM..or whichever you want...
Click to expand...
Click to collapse
I just can't understand what do you mean....
How am i supposed to recover any accidently deleted files if i didn't run those commands??????

dlotters said:
I am a bit lost...
ADB cannot be used when the phone is in bootloader. So after the instruction to put the phone in to bootloader the proceeding instructions which say:
type adb devices [enter]
type adb shel [enter]
won't achieve anything. In other words, adb devices (whilst the device is in bootloader) will not find any attached devices.
adb "shel" isn't a valid command. Do you mean adb "shell" ? If so, this too isn't going to work while the device is in bootloader, adb will simply reply with "error: device not found".
So I guess what I'm trying to ask is - what is the point of those typing those two commands? In this instance, they don't serve any purpose and can be omitted?
Click to expand...
Click to collapse
everything is written clearly...
these two commands repairs the USB brick also improves battery life and gives exact information about battery uses.. you will see this after flashing a ROM..
adb shel is correct command..it open the list of commands and details of phone...
Tell me what you need.. than i may solve the problem..

spitjo said:
I just can't understand what do you mean....
How am i supposed to recover any accidently deleted files if i didn't run those commands??????
Click to expand...
Click to collapse
by saying not able to recover any data is just.. if you are using any recover data application from market to recover anything which have been lost by mistake.. than you won't be able to..
BTW this Problem rarely occurs...

I' ve done this as you said in your 1st post but still Display uses more than 60% of battery use (i set brightness to minimum, all is set up to minimum and power saving)
I'm running AIO 3.0.5. CM7r2 hboot, XD2SDX, desire is s-lcd version

kciko said:
I' ve done this as you said in your 1st post but still Display uses more than 60% of battery use (i set brightness to minimum, all is set up to minimum and power saving)
I'm running AIO 3.0.5. CM7r2 hboot, XD2SDX, desire is s-lcd version
Click to expand...
Click to collapse
Calibrate tour battery... It happens that the software doesn't shows exact informations...
The problem is also with guys at cynogen too...
It is normal...
The thing is..after doing this tutorial you must be getting 16 hours battery life as normal use....
Don't worry about display...
Sent from my HTC Runnymede using Tapatalk

is it just me? having problem make adb detect my phone.

napalm.potter said:
is it just me? having problem make adb detect my phone.
Click to expand...
Click to collapse
Have you Downloaded the Tools from the link I've provided

If you have 4ext recovery boot into it and go to tools - usb unbrick. It works for me fine.
Sent from my HTC Desire using XDA App

Related

[Q] htc desire stuck on bootloader.

well i have my htc desire with s-off from alphaRev C7 a weak ago i try to install a custom rom and they say i have TO INSTALL some radio bla bla..to install the radio i have to do it by ADB i try that but is not show me any serial number is just list of devices.
i have a gold card already done,i buy my device from o2 locked but i unlocked after one year by o2 customers etc. program.i try to run unrevoked last one/old one 3.21 no way to work (firmware to new).
then i try to unroot my device by use the stock RUU RUU_Bravo_Froy2_UK_2.14.207.1_Radio_32.44.00.32U_5.09.05.30_2_release_144166_signed.
my ruu is RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed
at the end of the day i`m stuck on the black screen htc logo and 4 warning triangle in every corner of device.no hboot no recovery nothing.
when i connet my phone to my pc it detect (my htc )this is all.
no ADB no RECOVERY..
i will appreciate any help from u guys i`m so..sad..i can believe i broke my device.
thanks and hope to solve my problem.
i have htc sync installed..
try using RUU manually:
extract rom.zip from the RUU* and stick it in your C:\
boot into fastboot mode, plug your phone in and open command prompt and type
Code:
fastboot erase cache
fastboot flashzip C:\rom.zip
fastboot reboot
*to extract the rom.zip run the RUU (but do not proceed with the process, just open it, do NOT click next, don't even plug in your phone for that matter lol), select "run" from the start menu, then type in %temp%, This will opened a folder with a bunch of files and folders, use the "sort by date" feature, and select "today". there should only be 2 folders left, search inside them and the rom.zip should be in one of them, amongst many other androidy files
bortak said:
try using RUU manually:
extract rom.zip from the RUU* and stick it in your C:\
boot into fastboot mode, plug your phone in and open command prompt and type
Code:
fastboot erase cache
fastboot flashzip C:\rom.zip
fastboot reboot
*to extract the rom.zip run the RUU (but do not proceed with the process, just open it, do NOT click next, don't even plug in your phone for that matter lol), select "run" from the start menu, then type in %temp%, This will opened a folder with a bunch of files and folders, use the "sort by date" feature, and select "today". there should only be 2 folders left, search inside them and the rom.zip should be in one of them, amongst many other androidy files
Click to expand...
Click to collapse
can u say to me step by step please?..because i`m not to sure how to do it.
if u have a msn or yahoo account add me please [email protected]
gabon3zu said:
can u say to me step by step please?..because i`m not to sure how to do it.
if u have a msn or yahoo account add me please [email protected]
Click to expand...
Click to collapse
i did what u say to me but at the end i get:
BRAVO PVT4 SHIP S-ON
HBOOT-0.93.0001
MI CROP-051D
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
Aug 10 2010,17:52:18
RUU=ORANGE COLOUR .....THIS IS ALL I GET.
***************************************************
EDIT: NEVER MIND THAT WON'T WORK JUST SAW YOU'RE S-ON
***************************************************
don't use yahoo.. or msn lol...
alright I'll try walk you through it.
0. download the file I attached, and unzip it into your c:\
1. Run the RUU (do not click next)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. go to start menu and click "run" (or press the WINDOWS key and R as a shortcut)
3. type %temp% This opens up a window with a bunch of files/ folders
4. Use the sort by date function, and select today, there should only be about 2 folders, for me, the first one contains another folder, which contains the contents of the RUU
5. Select rom.zip and put it in your c:\
Once you've done that, turn your phone off, boot into fastboot (press the RETURN button and POWER simultaneously)
Plug the phone in via USB, your Phone should show FASTBOOT USB
Then start Command prompt (start menu, accessories, command prompt)
Type the following commands
Code:
cd\
fastboot erase cache
fastboot flashzip C:\rom.zip
fastboot reboot
***************************************************
EDIT: NEVER MIND THAT WON'T WORK JUST SAW YOU'RE S-ON
***************************************************
Sorry gotta bump you on this
do you get an error after you run the RUU? If so what error?
not worked at all..
i did what u say but when i use cmd and tipe fastboot .. is say adbdll missing so i copy your file in tools folder i tipe it again and work like that..but still no got.i`m still getting htc logo with all warning triangles on corners..
if i run RUU normally i get a Error [170]: USB Connection error.
wait.... you're S-ON and fastboot commands worked for you??
eerrmmm okay.. try
put fastboot.exe in c:\android-sdk\platform-tools
Code:
cd c:\android-sdk\platform-tools\
fastboot erase cache
fastboot flashzip C:\rom.zip
fastboot reboot
bortak said:
wait.... you're S-ON and fastboot commands worked for you??
eerrmmm okay.. try
put fastboot.exe in c:\android-sdk\platform-tools
Code:
cd c:\android-sdk\platform-tools\
fastboot erase cache
fastboot flashzip C:\rom.zip
fastboot reboot
Click to expand...
Click to collapse
not working..but i remember i have a alpharev 1.80 img disc..i will try with this and see what i do...thank u very much for your help..i really need it.
gabon3zu said:
not working..but i remember i have a alpharev 1.80 img disc..i will try with this and see what i do...thank u very much for your help..i really need it.
Click to expand...
Click to collapse
AFAIK you need to be booted up for that to work.. eerrmm search google for RUU error 170 you might get some answers, I browsed briefly and found a thing or two related but no clear answers
hello all,
opps! Im in exactly the same position.
I followed a non XDA guide and im stuck in bootloop with leedroid hd.
s-on btw. (i dont have access to a cd so cant use alpha rev. and cannot/will not be able to get access to one either....long story.)
Ive followed the above directions to no avail and with same results.
Anyideas? Im used to flashing RUU's on me winmob devices but got out of me depth on this one.
Can one not put the rom.zip on the sd card and install from recovery?
rgds
LoK
orlok said:
hello all,
opps! Im in exactly the same position.
I followed a non XDA guide and im stuck in bootloop with leedroid hd.
s-on btw. (i dont have access to a cd so cant use alpha rev. and cannot/will not be able to get access to one either....long story.)
Ive followed the above directions to no avail and with same results.
Anyideas? Im used to flashing RUU's on me winmob devices but got out of me depth on this one.
Can one not put the rom.zip on the sd card and install from recovery?
rgds
LoK
Click to expand...
Click to collapse
u will not believe this..i don`t know how i did but....i did it...i`m now
android v = 2.2
baseband version = 32.49.00.32U_5.11.05.27
kernel =2.6.32.15-gf5a401c [email protected] #1
build number = 2.29.405.5 CL293415 release-keys
software number = 2.29.405.5
browser version webkit = 3.1
i have to go at work in a bit...i don`t have time for this now but i will let u know more tomorrow.
Hello all,
a quick update,
as i could get into cwm I flashed CM7 (and the required radio first) and i seem to be up and running, albeit without sense (ui or common ).
does anyone think i got stuck in the loop because i was s-on with leedroid?
rgds
LoK
--UPDATE--
After much faffing around, i used the revolution beta one click s-off, and have now managed to get back too Standard Tmobile RUU.
Being the sucker that I am, I retried the Leedroid HD rom with no luck (hang on logo)
Using correct recommended radio, ext3 partitioned sd. cwm 2.7.0.5 (or is it 2.5.0.7?) rooted s-off.
Its a shame, I really wanted Sense 3
rgds
LoK

[Q] How do I ROOT Build 4.1.B.0.587!?

I just updated my phone, and I lost the root! I don't know how to get it back, can someone help me out!? Thanks!
Follow this thread mate: http://forum.xda-developers.com/showthread.php?t=1683957
check this
explain more easiest
http://forum.xda-developers.com/showpost.php?p=30902720&postcount=680
I have the LT15a, and my bootloader is locked.
I can't use LT18i kernel, can I?
mitulexander said:
I have the LT15a, and my bootloader is locked.
I can't use LT18i kernel, can I?
Click to expand...
Click to collapse
I dont suggest the kernel flash, i nearly bricked.
Download root.zip from superuser site. Put it in sd.
Just testpoint your mobile. Download fastboot.
Go to dev selection and download a kernel with cwm
Put it in fastboot folder
Shift + right click on the window background and choose open command box
Enter in the box
Fastboot boot "img name you downlaoded "
Example if the img is named arc.img
Fastboot boot arc.img
When fastboot completes, unplug phone. It will automaticly boot. Press volume down when you see blue led.
Go to install zip option
Choose install zip
Find zip in sd and install it.
Reboot.
Thats all. Brick-safe. Still stock with root. DRM keys keept
---------------------------------------------------------------------------------------------------------------------------------------
If you wait till tomorow i can upload all stuff you need
---------------------------------------------------------------------------------------------------------------------------------------
Here is the files (included the kernel with CWM, named ARC.img):
http://sdrv.ms/NLHiJC
Click to expand...
Click to collapse
when connecting to fastboot install drivers manuallt and browse to the friver map in the pack and install
Typed down from the sky with sexy LT15i
TheHaso said:
I dont suggest the kernel flash, i nearly bricked.
Download root.zip from superuser site. Put it in sd.
Just testpoint your mobile. Download fastboot.
Go to dev selection and download a kernel with cwm
Put it in fastboot folder
Shift + right click on the window background and choose open command box
Enter in the box
Fastboot boot "img name you downlaoded "
Example if the img is named arc.img
Fastboot boot arc.img
When fastboot completes, unplug phone. It will automaticly boot. Press volume down when you see blue led.
Go to install zip option
Choose install zip
Find zip in sd and install it.
Reboot.
Thats all. Brick-safe. Still stock with root. DRM keys keept
---------------------------------------------------------------------------------------------------------------------------------------
If you wait till tomorow i can upload all stuff you need
---------------------------------------------------------------------------------------------------------------------------------------
Here is the files (included the kernel with CWM, named ARC.img):
when connecting to fastboot install drivers manuallt and browse to the friver map in the pack and install
Typed down from the sky with sexy LT15i
Click to expand...
Click to collapse
Thank you for the above files and guide.
I'm following them, I hope correctly, but when I complete the "Fastboot boot arc.img" at using command prompt the box just displays "waiting for device"
I have USB debugging activated on the Arc
I have tried running this from my C: on my pc and my SD card I: via my pc
What am I doing wrong?
Cheers in advance
billdooruk said:
Thank you for the above files and guide.
I'm following them, I hope correctly, but when I complete the "Fastboot boot arc.img" at using command prompt the box just displays "waiting for device"
I have USB debugging activated on the Arc
I have tried running this from my C: on my pc and my SD card I: via my pc
What am I doing wrong?
Cheers in advance
Click to expand...
Click to collapse
Have you testpointed your phone ?
http://forum.xda-developers.com/showthread.php?t=1551494
If yes.
Did you turn off the phone and holded menu button while conncting, the button right to home button ?
Typed down from the sky with sexy LT15i
TheHaso said:
Have you testpointed your phone ?
http://forum.xda-developers.com/showthread.php?t=1551494
If yes.
Did you turn off the phone and holded menu button while conncting, the button right to home button ?
Typed down from the sky with sexy LT15i
Click to expand...
Click to collapse
No I have not testpointed the phone...I missed that line somehow!
I will try it as soon as I get some more time.
Thank you
billdooruk said:
Thank you for the above files and guide.
I'm following them, I hope correctly, but when I complete the "Fastboot boot arc.img" at using command prompt the box just displays "waiting for device"
I have USB debugging activated on the Arc
I have tried running this from my C: on my pc and my SD card I: via my pc
What am I doing wrong?
Cheers in advance
Click to expand...
Click to collapse
The instructions you are referring to were not crystal clear to me either, so I have written down my own experiences to get the fastboot work.
I suppose the necessary USB drivers are needed to be installed as a prerequisite - but I guess you already have them installed.
Otherwhise, I would recommend you to get them from Sony Mobile or use those from the s1tool. (Remember the testpoint method to unlock the bootloader?).
Enough said about drivers, here are the steps that is needed to make things work.
First of all you have to make sure of getting a response back from your phone when using the fastboot command.
If not, then you might have to look for answers somewhere else.
Turn off your phone.
Disconnect the USB cable if this is connected.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enter the following in the command window:
Code:
C:\>fastboot -i 0x0fce
You will get the response:
Code:
< waiting for device >
.
Hold down the menu button (the right one) and connect the USB cable at the same time.
A correct response from your phone would look similar to this:
Code:
finished. total time: 1346879044.955s
If this is working, then repeat step 1-4, but replace step 4 with the following text:
Code:
C:\>fastboot -i 0x0fce boot <name of your boot image>
A typical response would look like this:
Code:
C:\>fastboot -i 0x0fce boot arc.img
< waiting for device >
downloading 'boot.img'... INFOUSB download speed was 5752kB/s
OKAY [ 0.900s]
booting... INFODownload buffer format: boot IMG
OKAY [ 0.010s]
finished. total time: 0.910s
After the boot image is loaded into the phone, it will unpack the kernel image and ramdisk image follwed by the init scripts.
This will take some time, so have patience.
Good luck!
N.B. The 0x0fce value origins from the unique manufacturer USB identity, where Sony Ericsson was assigned the (hexadecimal) value 0x0fce.
Sorry friend, but on mobile device i dont have patience to write clearly
Typed down from the sky with sexy LT15i
Ok
I tried again tonight.
I completed the testpoint and all seemed to follow the information...although...My PC did not ask for the driver install - it did something automatically without any prompts - How do I change the driver (and which one) to the one provided in the s1tool download?
As when I try to follow the guides you have both provided, thank you again, fastboot still sits at the waiting for device prompt.
When I hold "menu" and connect the USB lead the phone boots into Charging screen ???
Any ideas?
Cheers again
There is a simple way to find out if you were successful in unlocking your device, if this could be the problem?
Remove the USB cable from your Arc.
Turn your phone off.
Start it again by pressing the power button. You will see the Sony logo after a few seconds.
Wait for a couple of more seconds.
The backlight of the screen will power up and the LED next to the Micro-USB connector will turn blue, if you succeeded.
Did it work for you?
If yes, I suggest you to remove the USB drivers related to Android and Sony (Ericsson) an reinstall them again.
billdooruk said:
Ok
I tried again tonight.
I completed the testpoint and all seemed to follow the information...although...My PC did not ask for the driver install - it did something automatically without any prompts - How do I change the driver (and which one) to the one provided in the s1tool download?
As when I try to follow the guides you have both provided, thank you again, fastboot still sits at the waiting for device prompt.
When I hold "menu" and connect the USB lead the phone boots into Charging screen ???
Any ideas?
Cheers again
Click to expand...
Click to collapse
Yes, turn of phone hold menu button, connect. Youll see blue led.
Now go to device manager find adb interface or s1boot. Right click and update drivers manually. Dirrect driver folder to the drivers map in that pack i sendt you. Click ok. Windows will install them. If it says it can harm your pc, just ignore it and thoose install anyway.
After its complete, try again.
Typed down from the sky with sexy LT15i

no hardware keys, how to get in to recovery

Hello, how can i boot in recovery without hardware buttons they are broken? and another thing i dont have any rom instaled, the phone i s-off with 4ext touch recovery. please help. THX:crying:
turn on the phone (u should just get stuck at white htc splash screen) then plug in to pc and open command window and type
adb devices
if ur device shows up then type
adb reboot recovery
it doesn¨t work when i turn on the phone i get to fastboot or hboot...?
capone5 said:
it doesn¨t work when i turn on the phone i get to fastboot or hboot...?
Click to expand...
Click to collapse
oh rite, thats a balls. Dont think theres any other way. Try taking the phone apart and cleaning the buttons. ul be surprised at the dust there. Hopefully that will work. If it dont then the only other way is to flash an ruu via bootloader. What does ur phone say in bootloader?
capone5 said:
it doesn¨t work when i turn on the phone i get to fastboot or hboot...?
Click to expand...
Click to collapse
Did you try running the adb commands that jmcclue listed above while in hboot?
Maybe try running fastboot commands such as "fastboot devices" to see if its recognized.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Try "fastboot devices"
capone5 said:
http://img40.imageshack.us/img40/3765/desireintrouble.jpg[/IMG ]i have install adb and when start the process i cant find device as you can see from the picture...i get in fastboot and hboot menu but i cant navigate any futher, is there a way to flash rom threw windows beyond recovery? because i do a full wipe and i dont have any rom instaled on my precious desire :(...[/QUOTE]
Hi Capone5,
One way to do it, is by downloading a recovery img ([url]http://forum.xda-developers.com/showthread.php?t=1791371[/url] or [url]http://forum.xda-developers.com/showthread.php?t=1474327[/url]) unzip and put it in the fasboot folder, plug phone in fastboot mode and type 'fastboot boot [filename].img'
Hope this helps
Click to expand...
Click to collapse
here are the pictures...when i turn on the phone it immediately go on this screen http://img708.imageshack.us/img708/9121/img20130602212615.jpg and when i try fastboot devices in cmd
capone5 said:
here are the pictures...when i turn on the phone it immediately go on this screen http://img708.imageshack.us/img708/9121/img20130602212615.jpg and when i try fastboot devices in cmd
Click to expand...
Click to collapse
You dont do "adb fastboot devices". You do "fastboot devices"
adb only works when phone is booted or stuck at boot animation, thats why i said try turning on phone then try adb while it bootloops r stuck at splash screen but his phone boots straight into bootloader. Also there is no command for fastboot to reboot recovery. Personally i would take phone apart and clean buttons, worth a shot.
@ op what boes it say in ur bootloader ?
jmcclue said:
adb only works when phone is booted or stuck at boot animation, thats why i said try turning on phone then try adb while it bootloops r stuck at splash screen but his phone boots straight into bootloader. Also there is no command for fastboot to reboot recovery. Personally i would take phone apart and clean buttons, worth a shot.
@ op what boes it say in ur bootloader ?
Click to expand...
Click to collapse
Would fastboot work without selecting it in hboot? If fastboot is able to detect the phone, then he can use "fastboot boot recovery.img" to boot into a touch based recovery like 4ext (without actually flashing it).
Heres his bootloader:
this i get when just trying fastboot devices
jmcclue said:
adb only works when phone is booted or stuck at boot animation, thats why i said try turning on phone then try adb while it bootloops r stuck at splash screen but his phone boots straight into bootloader. Also there is no command for fastboot to reboot recovery. Personally i would take phone apart and clean buttons, worth a shot.
@ op what boes it say in ur bootloader ?
Click to expand...
Click to collapse
the buttons of volume are broken and i try everything to just press - and nothing hapened...how can i load a new recovery threw fastboot?
Check your android-sdk/platform-tools/ directory to make sure the fastboot.exe is there.
If its not there, redownload the sdk and setup adb/fastboot using this guide. Also make sure you install these fastboot drivers
Then try "fastboot devices" again and hope that the phone shows up. If it does you can boot a recovery by doing this:
-Download the 4ext recovery img from here
-Extract the zip and put the recovery img in your android-sdk/platform-tools/ directory
-Run "fastboot boot recovery.img"
If its not showing up in fastboot im not really sure that you have any options, other than to do what jmcclue suggested.
capone5 said:
this i get when just trying fastboot devices
Click to expand...
Click to collapse
have u got the fastboot drivers installed on ur computer?
follow this guide to install them. u cant use fastboot unless u do.
ADB & Fastboot
chromium96 said:
Check your android-sdk/platform-tools/ directory to make sure the fastboot.exe is there.
If its not there, redownload the sdk and setup adb/fastboot using this guide. Also make sure you install these fastboot drivers
Then try "fastboot devices" again and hope that the phone shows up. If it does you can boot a recovery by doing this:
-Download the 4ext recovery img from here
-Extract the zip and put the recovery img in your android-sdk/platform-tools/ directory
-Run "fastboot boot recovery.img"
If its not showing up in fastboot im not really sure that you have any options, other than to do what jmcclue suggested.
Click to expand...
Click to collapse
i just put recovery.img in android sdk/tools folder then ran the command fastboot boot recovery.img
and guess what? im in recovery. Nice 1 chromium, it works
heres a pic
jmcclue said:
i just put recovery.img in android sdk/tools folder then ran the command fastboot boot recovery.img
and guess what? im in recovery. Nice 1 chromium, it works
Click to expand...
Click to collapse
Yep it works. Im trying to compile TWRP for the desire, so i use that command to temporarily test it rather than actually flashing it.
chromium96 said:
Yep it works. Im trying to compile TWRP for the desire, so i use that command to temporarily test it rather than actually flashing it.
Click to expand...
Click to collapse
its handy to know coz im pretty sure hardly anyone knows that and i bet u cant find it on the old interweb lol

[Q] Stuck..but where? Showing HBOOT, S-OFF information, etc.

Hi everybody,
a friend of mine asked me to have a closer look on an HTC Desire having a really strange behavior:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Direktlink
This is where it get's stuck but:
It still reacts on USB connects changing from 'HBOOT' to 'HBOOT_USB_PLUG' but navigating or selecting an option is not possible.
Another thing, making me wonder, is that this screen appears, after just hitting the power button - it's not necessarry to kepp VOL Down pressed...
Hopefully someone can help me out of this,
Thanks in advance,
Dominik
Setup adb/fastboot.
Download the 4ext recovery img:
http://www.4ext.net/ddl/bravo/recovery.zip (extract the zip), and put it in the platform-tools folder of where your android sdk is.
Boot the phone into fastboot (hold power and back), then use this command:
Code:
fastboot boot recovery.img
Once your in recovery do a full wipe and flash a ROM.
chromium96 said:
Setup adb/fastboot.
Download the 4ext recovery img:
http://www.4ext.net/ddl/bravo/recovery.zip (extract the zip), and put it in the platform-tools folder of where your android sdk is.
Boot the phone into fastboot (hold power and back), then use this command:
Code:
fastboot boot recovery.img
Once your in recovery do a full wipe and flash a ROM.
Click to expand...
Click to collapse
Hi,
sorry, I forgot to mention, that the device cannot be found using adb...
yakazaa said:
Hi,
sorry, I forgot to mention, that the device cannot be found using adb...
Click to expand...
Click to collapse
It needs to be recognized by fastboot not adb. Download and install HTC sync then uninstall it leaving only the drivers behind. Also install these: http://downloads.unrevoked.com/HTCDriver3.0.0.007.exe
Then boot the phone into fastboot mode (power and back) and run "fastboot devices" to see if it's recognized. If it is follow the instructions in my first post.
chromium96 said:
It needs to be recognized by fastboot not adb. Download and install HTC sync then uninstall it leaving only the drivers behind. Also install these: http://downloads.unrevoked.com/HTCDriver3.0.0.007.exe
Then boot the phone into fastboot mode (power and back) and run "fastboot devices" to see if it's recognized. If it is follow the instructions in my first post.
Click to expand...
Click to collapse
Yeah, it's working, thanks a lot!
I tried to boot with "back + Power" several times.... but without USB connected...
EDIT: No, it wasn't regarding USB...
This only works from time to time, more less then more.. (hopefully you know what I mean)
Okay, now I have a way to get into the recovery, a big step forward!!
What now?
I'd like to "install" this recovery now, as I did before on my HD2 in the past but this is far long ago, so sorry for this stupid question:
How to replace the actual existing Recovery with the booted 4ext one?
On 4ext.net I found a way with a booted rom, but without...
Later on, I'd like to flash CyanogenMod 7, so I already downloaded the suggested PB99img_cm7r2.zip.
I remember this has s.th. to do regarding partitioning, right? What do I have to do with this file?
Can I flash this with fastboot ?
During usual bootloader startup it says "No image or wrong size"
AS you may see, I know a little, but it's damned long ago...
Sorry for my worse english, but I don't know how to describe this better
Hopefully you can help me anyway,
Thanks a lot in advance!!
yakazaa said:
Yeah, it's working, thanks a lot!
I tried to boot with "back + Power" several times.... but without USB connected...
EDIT: No, it wasn't regarding USB...
This only works from time to time, more less then more.. (hopefully you know what I mean)
Okay, now I have a way to get into the recovery, a big step forward!!
What now?
I'd like to "install" this recovery now, as I did before on my HD2 in the past but this is far long ago, so sorry for this stupid question:
How to replace the actual existing Recovery with the booted 4ext one?
On 4ext.net I found a way with a booted rom, but without...
Later on, I'd like to flash CyanogenMod 7, so I already downloaded the suggested PB99img_cm7r2.zip.
I remember this has s.th. to do regarding partitioning, right? What do I have to do with this file?
Can I flash this with fastboot ?
During usual bootloader startup it says "No image or wrong size"
AS you may see, I know a little, but it's damned long ago...
Sorry for my worse english, but I don't know how to describe this better
Hopefully you can help me anyway,
Thanks a lot in advance!!
Click to expand...
Click to collapse
Use "fastboot flash recovery recovery.img" to fully install the recovery. Rename the hboot(partition) file you downloaded to "PB99IMG.zip" and put it on the root of your SD card. Boot the phone into hboot and it will search for the file. When it finds it select yes to install it then reboot.
Go into recovery and wipe everything except the SD card then flash the ROM.
Sent using xda premium
chromium96 said:
Use "fastboot flash recovery recovery.img" to fully install the recovery. Rename the hboot(partition) file you downloaded to "PB99IMG.zip" and put it on the root of your SD card. Boot the phone into hboot and it will search for the file. When it finds it select yes to install it then reboot.
Go into recovery and wipe everything except the SD card then flash the ROM.
Sent using xda premium
Click to expand...
Click to collapse
Hi,
thanks a lot for these great hints, but sadly I'm unable since yesterday to enter fastboot mode
System always starts into HBOOT - and dies, weather I press any additional keys to the power button or not...
Any alternative way to enter fastboot mode?
yakazaa said:
Hi,
thanks a lot for these great hints, but sadly I'm unable since yesterday to enter fastboot mode
System always starts into HBOOT - and dies, weather I press any additional keys to the power button or not...
Any alternative way to enter fastboot mode?
Click to expand...
Click to collapse
Back + power
Sent using xda premium
chromium96 said:
Back + power
Sent using xda premium
Click to expand...
Click to collapse
I know and this worked yesterday, but it started with problems, as mentioned above.
Today I never had access..

[Q] Broken display + data lost

Hi everyone,
I know it's a thread so discussed, but it's a little different for me so I can't find the answer..
The basic problem is that I have a broken display, and I cannot access my phone since it's locked with digit sequence and also I have not enabled usb debugging.
After reading a lot of threads, I managed to do these steps:
- Unlocked the bootloader with fastboot
- Installed Clockwork mod
Now I'm stuck.. Unlocking the bootloader erased all my data, I knew this thing, but I hoped to recover it in some way...
Every single guide is based on adb.
Ok, my device isn't recognized with adb.
Since I haven't the display, I'm doing everything "blind".
To enter in fastboot mode -> vol up + vol down + power. Now the phone is recognized with fastboot command.
By looking at some videos, to enter the recovery mode I have to push vol down 2 times, and then power to confirm.
I've done that procedure, but the phone is not recognized by adb.
I'm not even sure that I have CW installed, even if fastboot procedure was fine...
Any idea? I'd like only to recover my photos, they were important to me.
Thank you
vaka85 said:
Hi everyone,
I know it's a thread so discussed, but it's a little different for me so I can't find the answer..
The basic problem is that I have a broken display, and I cannot access my phone since it's locked with digit sequence and also I have not enabled usb debugging.
After reading a lot of threads, I managed to do these steps:
- Unlocked the bootloader with fastboot
- Installed Clockwork mod
Now I'm stuck.. Unlocking the bootloader erased all my data, I knew this thing, but I hoped to recover it in some way...
Every single guide is based on adb.
Ok, my device isn't recognized with adb.
Since I haven't the display, I'm doing everything "blind".
To enter in fastboot mode -> vol up + vol down + power. Now the phone is recognized with fastboot command.
By looking at some videos, to enter the recovery mode I have to push vol down 2 times, and then power to confirm.
I've done that procedure, but the phone is not recognized by adb.
I'm not even sure that I have CW installed, even if fastboot procedure was fine...
Any idea? I'd like only to recover my photos, they were important to me.
Thank you
Click to expand...
Click to collapse
to be sure of being in recovery, you can reboot into it by using 'fastboot reboot recovery'
CWM should have an option to mount sdcard, its under mounts/storage, but since you dont have a display, you'd have to find a screenshot somewhere and try following that. the TWRP recovery has the option too, but im not sure it can be controlled via volume + power
EDIT: in CWM, once youre in recovery, try VOL UP 4 times, power, then volume up 2 times and power. does that work?
IINexusII said:
to be sure of being in recovery, you can reboot into it by using 'fastboot reboot recovery'
CWM should have an option to mount sdcard, its under mounts/storage, but since you dont have a display, you'd have to find a screenshot somewhere and try following that. the TWRP recovery has the option too, but im not sure it can be controlled via volume + power
Click to expand...
Click to collapse
mount /sdcard will not work as there is no sdcard. this phone has been out almost 2 years and people still swear there's an sdcard. its amazing.
you need to fastboot reboot into recovery and then use adb pull
Zepius said:
mount /sdcard will not work as there is no sdcard. this phone has been out almost 2 years and people still swear there's an sdcard. its amazing.
you need to fastboot reboot into recovery and then use adb pull
Click to expand...
Click to collapse
well youre pretty stupid aint you. Android uses the /sdcard location as data/media
IINexusII said:
well youre pretty stupid aint you. Android uses the /sdcard location as data/media
Click to expand...
Click to collapse
and you still cant mount /sdcard in recovery.
dont call someone stupid unless you're sure you're right.
Zepius said:
and you still cant mount /sdcard in recovery.
dont call someone stupid unless you're sure you're right.
Click to expand...
Click to collapse
"adb pull /sdcard/DCIM/" will work
or "adb pull /data/media/DCIM/"
IINexusII said:
"adb pull /sdcard/DCIM/" will work
or "adb pull /data/media/DCIM/"
Click to expand...
Click to collapse
thats what i said to do... you're claiming you can mount the /sdcard... WHICH YOU CANT.
/data/ is mounted when you go into recovery.
Zepius said:
thats what i said to do... you're claiming you can mount the /sdcard... WHICH YOU CANT.
/data/ is mounted when you go into recovery.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IINexusII said:
Click to expand...
Click to collapse
and it does nothing in CWM. NOTHING. good god you are stubborn and wrong.
this is my last post on this topic,
OP,
reboot into recovery and use adb pull. anything the other guy says about mounting the sdcard cannot be done and he has no idea what he is talking about.
thank you guys for the replies..
I'm sorry for the (maybe) stupid question.. How can I reboot into recovery? There is no such option in fastboot...
edit: ok I've got it. Maybe the CW was not correctly installed.
However now I have to find a way to recover my photos...
Zepius said:
and it does nothing in CWM. NOTHING. good god you are stubborn and wrong.
this is my last post on this topic,
OP,
reboot into recovery and use adb pull. anything the other guy says about mounting the sdcard cannot be done and he has no idea what he is talking about.
Click to expand...
Click to collapse
i never said mounting the /sdcard will bring it up on the pc as a mass storage device. mounting it will give it access through ADB, then he can simply pull the DCIM folder which will contain his camera pictures by using "adb pull /sdcard/DCIM C:/DCIM/"
ok guys stop fighting please
I need your help not your hate
So... I can use adb now.. But how to proceed? data are wiped with the unlocking. So, if i can access to the phone as an external memory, I could use data recovery software.. Otherwise with adb it pulls empty folders...
vaka85 said:
ok guys stop fighting please
I need your help not your hate
So... I can use adb now.. But how to proceed? data are wiped with the unlocking. So, if i can access to the phone as an external memory, I could use data recovery software.. Otherwise with adb it pulls empty folders...
Click to expand...
Click to collapse
oh.... well if you wiped your phone by unlocking the bootloader then everything we said was useless im afraid
sorry
here we are!
Current situation:
I managed to enter in recovery mode.
The only way to recover my data seems to be this procedure:
http://forum.xda-developers.com/showthread.php?t=1994705
but I need to install busybox.
Since I can work only in recovery mode, could I install it via recovery?
The alternative is to install a rom with root and busybox, but I can't put the device in sideload mode, I don't know why...
Once I'm in recovery mode, I push twive vol down, and it should be the "install zip from sideload", but the adb status remains recovery...
I don't know why.. It's very frustrating..
Any help?
Thanks

Categories

Resources