Need help flashing recovery. - Wildfire Q&A, Help & Troubleshooting

Hi people.
I got some problems and some questions.
Until now I was perfectly happy with CWM 2.5.0.1 Recovery, BUT, I found out about newer recoveryes, so I decided to flash one.
NOW!
I'm VERY pissed off because I can't flash it.
I tried unrEVOked method, won't work, it pushes recovery but gets stuck on WAITING FOR BOOTLOADER; MAKE SURE ALL DRIVERS ARE INSTALLED. And yes, I have all drivers installed (ones that came with HTC Sync and Android 1.0 usb driver) and I tried with unrEVOked 3.14 and with the latest unrEVOked. So, thats all about that method and we can see it DOESN'T work.
Off to the next one:
I tried flashing the image with terminal emulator. Once again I did all the steps good: Copied the recovery.img to the root of SD card, entered t.e. and wrote the command (su to get superuser access and then flash_image recovery /sdcard/recovery.img).
Once again, NOTHING.
Then I tried using ROM manager from CWM. It flashes a recovery but I can only access that recovery through ROM manager but not through bootloader, that one gets me back to 2.5.0.1.
So I would REALLY appreciate if I can get some help.
Thanks in advance.
Regards from pissed off and unhappy me.

1st of buddy , your Question should be posted in the Q|A Section
2nd , did you try to re-install your phone drivers ?

k0sh,
1) whatever, mod can transfer it there, i just want some help.
2) yes.

smokzye said:
k0sh,
1) whatever, mod can transfer it there, i just want some help.
2) yes.
Click to expand...
Click to collapse
buddy , though you are my friend , but maybe you need to re-write your last comment specially number 1) .. its really not good though
regarding 2) what you wrote exactly in terminal ?
only 1 line ?

Seriously mate, just install Android SDK, and use the Fastboot option. Easy as pie and no issues at all.
Install Android SDK, then, get the Recovery.IMG file of the Clockworkmod version you want to flash. Place this in the SDK's Tools folder. Then, reboot your Wildfire in the bootloader mode, Enter Fastboot mode (Press Power button on Fastboot).
Then, open Command Prompt on Windows, cd (browse) to the SDK's tools folder and type the following command:
fastboot flash recovery recovery.img
Done.
Screenshot here (My SDK is installed in D:\Android)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AFAIK, You dont even need SDK installed. Just the Fastboot and binary will do, which can be obtained here: (Still, not very sure of this process, as I had the SDK installed a long time back)
http://forum.xda-developers.com/showthread.php?p=14693680

enough of number 1. :S
now
first line
su (ENTER)
by that i get superuser access
then in second line
flash_image recovery /sdcard/recovery.img (ENTER)
so now i get
operation done in next line
but phone should first: freeze for a bit
then get an empty line
nothing happens to me tho, and i tried to reboot in recovery coz i thought maybe it was a success, nope. same old stuff

3xeno said:
Seriously mate, just install Android SDK, and use the Fastboot option. Easy as pie and no issues at all.
Install Android SDK, then, get the Recovery.IMG file of the Clockworkmod version you want to flash. Place this in the SDK's Tools folder. Then, reboot your Wildfire in the bootloader mode, Enter Fastboot mode (Press Power button on Fastboot).
Then, open Command Prompt on Windows, cd (browse) to the SDK's tools folder and type the following command:
fastboot flash recovery recovery.img
Done.
Screenshot here (My SDK is installed in D:\Android)
AFAIK, You dont even need SDK installed. Just the Fastboot and binary will do, which can be obtained here: (Still, not very sure of this process, as I had the SDK installed a long time back)
http://forum.xda-developers.com/showthread.php?p=14693680
Click to expand...
Click to collapse
Thanks 3xeno. ^^

3xeno said:
Seriously mate, just install Android SDK, and use the Fastboot option. Easy as pie and no issues at all.
Install Android SDK, then, get the Recovery.IMG file of the Clockworkmod version you want to flash. Place this in the SDK's Tools folder. Then, reboot your Wildfire in the bootloader mode, Enter Fastboot mode (Press Power button on Fastboot).
Then, open Command Prompt on Windows, cd (browse) to the SDK's tools folder and type the following command:
fastboot flash recovery recovery.img
Done.
Screenshot here (My SDK is installed in D:\Android)
AFAIK, You dont even need SDK installed. Just the Fastboot and binary will do, which can be obtained here: (Still, not very sure of this process, as I had the SDK installed a long time back)
http://forum.xda-developers.com/showthread.php?p=14693680
Click to expand...
Click to collapse
please help!!! android SDK says (waiting for device) when my tattoo is in fastboot usb mode. it finds my device when my tattoo is on.

I've the same problem... If you have another way to flash recovery depends on S-ON/S-OFF stuff. Take a look at this thread the part 6: Custom Recoveries
If your buzz is S-ON (like mine) there isn't any other way but unrevoked but it doesn't seem to work, at least if your phone is already rooted

u do have all your windows drivers setup, do u?

glida said:
please help!!! android SDK says (waiting for device) when my tattoo is in fastboot usb mode. it finds my device when my tattoo is on.
Click to expand...
Click to collapse
Don't flash a buzz recovery for a tattoo... you will brick your phone

Related

[Q] htc desire stuck on bootloader.

well i have my htc desire with s-off from alphaRev C7 a weak ago i try to install a custom rom and they say i have TO INSTALL some radio bla bla..to install the radio i have to do it by ADB i try that but is not show me any serial number is just list of devices.
i have a gold card already done,i buy my device from o2 locked but i unlocked after one year by o2 customers etc. program.i try to run unrevoked last one/old one 3.21 no way to work (firmware to new).
then i try to unroot my device by use the stock RUU RUU_Bravo_Froy2_UK_2.14.207.1_Radio_32.44.00.32U_5.09.05.30_2_release_144166_signed.
my ruu is RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed
at the end of the day i`m stuck on the black screen htc logo and 4 warning triangle in every corner of device.no hboot no recovery nothing.
when i connet my phone to my pc it detect (my htc )this is all.
no ADB no RECOVERY..
i will appreciate any help from u guys i`m so..sad..i can believe i broke my device.
thanks and hope to solve my problem.
i have htc sync installed..
try using RUU manually:
extract rom.zip from the RUU* and stick it in your C:\
boot into fastboot mode, plug your phone in and open command prompt and type
Code:
fastboot erase cache
fastboot flashzip C:\rom.zip
fastboot reboot
*to extract the rom.zip run the RUU (but do not proceed with the process, just open it, do NOT click next, don't even plug in your phone for that matter lol), select "run" from the start menu, then type in %temp%, This will opened a folder with a bunch of files and folders, use the "sort by date" feature, and select "today". there should only be 2 folders left, search inside them and the rom.zip should be in one of them, amongst many other androidy files
bortak said:
try using RUU manually:
extract rom.zip from the RUU* and stick it in your C:\
boot into fastboot mode, plug your phone in and open command prompt and type
Code:
fastboot erase cache
fastboot flashzip C:\rom.zip
fastboot reboot
*to extract the rom.zip run the RUU (but do not proceed with the process, just open it, do NOT click next, don't even plug in your phone for that matter lol), select "run" from the start menu, then type in %temp%, This will opened a folder with a bunch of files and folders, use the "sort by date" feature, and select "today". there should only be 2 folders left, search inside them and the rom.zip should be in one of them, amongst many other androidy files
Click to expand...
Click to collapse
can u say to me step by step please?..because i`m not to sure how to do it.
if u have a msn or yahoo account add me please [email protected]
gabon3zu said:
can u say to me step by step please?..because i`m not to sure how to do it.
if u have a msn or yahoo account add me please [email protected]
Click to expand...
Click to collapse
i did what u say to me but at the end i get:
BRAVO PVT4 SHIP S-ON
HBOOT-0.93.0001
MI CROP-051D
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
Aug 10 2010,17:52:18
RUU=ORANGE COLOUR .....THIS IS ALL I GET.
***************************************************
EDIT: NEVER MIND THAT WON'T WORK JUST SAW YOU'RE S-ON
***************************************************
don't use yahoo.. or msn lol...
alright I'll try walk you through it.
0. download the file I attached, and unzip it into your c:\
1. Run the RUU (do not click next)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. go to start menu and click "run" (or press the WINDOWS key and R as a shortcut)
3. type %temp% This opens up a window with a bunch of files/ folders
4. Use the sort by date function, and select today, there should only be about 2 folders, for me, the first one contains another folder, which contains the contents of the RUU
5. Select rom.zip and put it in your c:\
Once you've done that, turn your phone off, boot into fastboot (press the RETURN button and POWER simultaneously)
Plug the phone in via USB, your Phone should show FASTBOOT USB
Then start Command prompt (start menu, accessories, command prompt)
Type the following commands
Code:
cd\
fastboot erase cache
fastboot flashzip C:\rom.zip
fastboot reboot
***************************************************
EDIT: NEVER MIND THAT WON'T WORK JUST SAW YOU'RE S-ON
***************************************************
Sorry gotta bump you on this
do you get an error after you run the RUU? If so what error?
not worked at all..
i did what u say but when i use cmd and tipe fastboot .. is say adbdll missing so i copy your file in tools folder i tipe it again and work like that..but still no got.i`m still getting htc logo with all warning triangles on corners..
if i run RUU normally i get a Error [170]: USB Connection error.
wait.... you're S-ON and fastboot commands worked for you??
eerrmmm okay.. try
put fastboot.exe in c:\android-sdk\platform-tools
Code:
cd c:\android-sdk\platform-tools\
fastboot erase cache
fastboot flashzip C:\rom.zip
fastboot reboot
bortak said:
wait.... you're S-ON and fastboot commands worked for you??
eerrmmm okay.. try
put fastboot.exe in c:\android-sdk\platform-tools
Code:
cd c:\android-sdk\platform-tools\
fastboot erase cache
fastboot flashzip C:\rom.zip
fastboot reboot
Click to expand...
Click to collapse
not working..but i remember i have a alpharev 1.80 img disc..i will try with this and see what i do...thank u very much for your help..i really need it.
gabon3zu said:
not working..but i remember i have a alpharev 1.80 img disc..i will try with this and see what i do...thank u very much for your help..i really need it.
Click to expand...
Click to collapse
AFAIK you need to be booted up for that to work.. eerrmm search google for RUU error 170 you might get some answers, I browsed briefly and found a thing or two related but no clear answers
hello all,
opps! Im in exactly the same position.
I followed a non XDA guide and im stuck in bootloop with leedroid hd.
s-on btw. (i dont have access to a cd so cant use alpha rev. and cannot/will not be able to get access to one either....long story.)
Ive followed the above directions to no avail and with same results.
Anyideas? Im used to flashing RUU's on me winmob devices but got out of me depth on this one.
Can one not put the rom.zip on the sd card and install from recovery?
rgds
LoK
orlok said:
hello all,
opps! Im in exactly the same position.
I followed a non XDA guide and im stuck in bootloop with leedroid hd.
s-on btw. (i dont have access to a cd so cant use alpha rev. and cannot/will not be able to get access to one either....long story.)
Ive followed the above directions to no avail and with same results.
Anyideas? Im used to flashing RUU's on me winmob devices but got out of me depth on this one.
Can one not put the rom.zip on the sd card and install from recovery?
rgds
LoK
Click to expand...
Click to collapse
u will not believe this..i don`t know how i did but....i did it...i`m now
android v = 2.2
baseband version = 32.49.00.32U_5.11.05.27
kernel =2.6.32.15-gf5a401c [email protected] #1
build number = 2.29.405.5 CL293415 release-keys
software number = 2.29.405.5
browser version webkit = 3.1
i have to go at work in a bit...i don`t have time for this now but i will let u know more tomorrow.
Hello all,
a quick update,
as i could get into cwm I flashed CM7 (and the required radio first) and i seem to be up and running, albeit without sense (ui or common ).
does anyone think i got stuck in the loop because i was s-on with leedroid?
rgds
LoK
--UPDATE--
After much faffing around, i used the revolution beta one click s-off, and have now managed to get back too Standard Tmobile RUU.
Being the sucker that I am, I retried the Leedroid HD rom with no luck (hang on logo)
Using correct recommended radio, ext3 partitioned sd. cwm 2.7.0.5 (or is it 2.5.0.7?) rooted s-off.
Its a shame, I really wanted Sense 3
rgds
LoK

no hardware keys, how to get in to recovery

Hello, how can i boot in recovery without hardware buttons they are broken? and another thing i dont have any rom instaled, the phone i s-off with 4ext touch recovery. please help. THX:crying:
turn on the phone (u should just get stuck at white htc splash screen) then plug in to pc and open command window and type
adb devices
if ur device shows up then type
adb reboot recovery
it doesn¨t work when i turn on the phone i get to fastboot or hboot...?
capone5 said:
it doesn¨t work when i turn on the phone i get to fastboot or hboot...?
Click to expand...
Click to collapse
oh rite, thats a balls. Dont think theres any other way. Try taking the phone apart and cleaning the buttons. ul be surprised at the dust there. Hopefully that will work. If it dont then the only other way is to flash an ruu via bootloader. What does ur phone say in bootloader?
capone5 said:
it doesn¨t work when i turn on the phone i get to fastboot or hboot...?
Click to expand...
Click to collapse
Did you try running the adb commands that jmcclue listed above while in hboot?
Maybe try running fastboot commands such as "fastboot devices" to see if its recognized.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Try "fastboot devices"
capone5 said:
http://img40.imageshack.us/img40/3765/desireintrouble.jpg[/IMG ]i have install adb and when start the process i cant find device as you can see from the picture...i get in fastboot and hboot menu but i cant navigate any futher, is there a way to flash rom threw windows beyond recovery? because i do a full wipe and i dont have any rom instaled on my precious desire :(...[/QUOTE]
Hi Capone5,
One way to do it, is by downloading a recovery img ([url]http://forum.xda-developers.com/showthread.php?t=1791371[/url] or [url]http://forum.xda-developers.com/showthread.php?t=1474327[/url]) unzip and put it in the fasboot folder, plug phone in fastboot mode and type 'fastboot boot [filename].img'
Hope this helps
Click to expand...
Click to collapse
here are the pictures...when i turn on the phone it immediately go on this screen http://img708.imageshack.us/img708/9121/img20130602212615.jpg and when i try fastboot devices in cmd
capone5 said:
here are the pictures...when i turn on the phone it immediately go on this screen http://img708.imageshack.us/img708/9121/img20130602212615.jpg and when i try fastboot devices in cmd
Click to expand...
Click to collapse
You dont do "adb fastboot devices". You do "fastboot devices"
adb only works when phone is booted or stuck at boot animation, thats why i said try turning on phone then try adb while it bootloops r stuck at splash screen but his phone boots straight into bootloader. Also there is no command for fastboot to reboot recovery. Personally i would take phone apart and clean buttons, worth a shot.
@ op what boes it say in ur bootloader ?
jmcclue said:
adb only works when phone is booted or stuck at boot animation, thats why i said try turning on phone then try adb while it bootloops r stuck at splash screen but his phone boots straight into bootloader. Also there is no command for fastboot to reboot recovery. Personally i would take phone apart and clean buttons, worth a shot.
@ op what boes it say in ur bootloader ?
Click to expand...
Click to collapse
Would fastboot work without selecting it in hboot? If fastboot is able to detect the phone, then he can use "fastboot boot recovery.img" to boot into a touch based recovery like 4ext (without actually flashing it).
Heres his bootloader:
this i get when just trying fastboot devices
jmcclue said:
adb only works when phone is booted or stuck at boot animation, thats why i said try turning on phone then try adb while it bootloops r stuck at splash screen but his phone boots straight into bootloader. Also there is no command for fastboot to reboot recovery. Personally i would take phone apart and clean buttons, worth a shot.
@ op what boes it say in ur bootloader ?
Click to expand...
Click to collapse
the buttons of volume are broken and i try everything to just press - and nothing hapened...how can i load a new recovery threw fastboot?
Check your android-sdk/platform-tools/ directory to make sure the fastboot.exe is there.
If its not there, redownload the sdk and setup adb/fastboot using this guide. Also make sure you install these fastboot drivers
Then try "fastboot devices" again and hope that the phone shows up. If it does you can boot a recovery by doing this:
-Download the 4ext recovery img from here
-Extract the zip and put the recovery img in your android-sdk/platform-tools/ directory
-Run "fastboot boot recovery.img"
If its not showing up in fastboot im not really sure that you have any options, other than to do what jmcclue suggested.
capone5 said:
this i get when just trying fastboot devices
Click to expand...
Click to collapse
have u got the fastboot drivers installed on ur computer?
follow this guide to install them. u cant use fastboot unless u do.
ADB & Fastboot
chromium96 said:
Check your android-sdk/platform-tools/ directory to make sure the fastboot.exe is there.
If its not there, redownload the sdk and setup adb/fastboot using this guide. Also make sure you install these fastboot drivers
Then try "fastboot devices" again and hope that the phone shows up. If it does you can boot a recovery by doing this:
-Download the 4ext recovery img from here
-Extract the zip and put the recovery img in your android-sdk/platform-tools/ directory
-Run "fastboot boot recovery.img"
If its not showing up in fastboot im not really sure that you have any options, other than to do what jmcclue suggested.
Click to expand...
Click to collapse
i just put recovery.img in android sdk/tools folder then ran the command fastboot boot recovery.img
and guess what? im in recovery. Nice 1 chromium, it works
heres a pic
jmcclue said:
i just put recovery.img in android sdk/tools folder then ran the command fastboot boot recovery.img
and guess what? im in recovery. Nice 1 chromium, it works
Click to expand...
Click to collapse
Yep it works. Im trying to compile TWRP for the desire, so i use that command to temporarily test it rather than actually flashing it.
chromium96 said:
Yep it works. Im trying to compile TWRP for the desire, so i use that command to temporarily test it rather than actually flashing it.
Click to expand...
Click to collapse
its handy to know coz im pretty sure hardly anyone knows that and i bet u cant find it on the old interweb lol

wrong hboot flashed!!! (blackrose nexuse one)

hey guys,
i flashed blackrose (nexuse one hboot) and after it, i can't flash another hboot. say "only blackrose can be flashed"
so i run ruu GB 2.3.3 , that's failed
and now stuck in ruu mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
what can i do to solve this problem???
help me step by step
LOL I did this too.
If your desire loads an OS
http://forum.xda-developers.com/showthread.php?t=1460035
Connect to your PC with debugging
Run nexus blackrose on your PC
run from command prompt with command 'blackrose skip'
you should get menu
select disable hboot protection
- You should get message about be careful and phone restarts to fastboot
Flash alpharevs bravo_alphaspl.img and you should be good to go
You MAY be able to flash bravo_alphaspl.img over the blackrose hboot without running the PC end of blackrose - but I ended up disabling blackrose hboot protection using the nexus PC blackrose frontend
You MAY find its partly trashed your recovery - so you may need to re-install whatever you have for recovery.
I believe to run ruu you need to have full htc sync installed (and probably goldcard) the opposite of everything else.
no os installed!
Robcr said:
LOL I did this too.
If your desire loads an OS
http://forum.xda-developers.com/showthread.php?t=1460035
Connect to your PC with debugging
Run nexus blackrose on your PC
run from command prompt with command 'blackrose skip'
you should get menu
select disable hboot protection
- You should get message about be careful and phone restarts to fastboot
Flash alpharevs bravo_alphaspl.img and you should be good to go
You MAY be able to flash bravo_alphaspl.img over the blackrose hboot without running the PC end of blackrose - but I ended up disabling blackrose hboot protection using the nexus PC blackrose frontend
You MAY find its partly trashed your recovery - so you may need to re-install whatever you have for recovery.
I believe to run ruu you need to have full htc sync installed (and probably goldcard) the opposite of everything else.
Click to expand...
Click to collapse
no os installed !! just stuck in ruu mode.
"Run nexus blackrose on your PC" where is link download blackrose files???
Then i doubt you can do anything about changing your hboot until you have
Just concentrate on getting a working rom installed, i would suggest cm-7.2.0.1-bravo
To do that you may need to get a working recovery I couldn't get fastboot to install pretty much anything in that state.
See my recent posts on this including an older 'working' but faulty 4ext via PB99IMG.zip (dont clear any sd partitions with this - just use it to load a rom then update via 4ext app)
First step try the 'clear storage' (with no sd-card in) option from bootloader
If after that still nothing, and you have no recovery,
try the following which ended up the omly way I could get a working recovery installed:
http://forum.xda-developers.com/showpost.php?p=29427407&postcount=17
to get a working recoverr installed but DONT clear the ext partitions using this, just use it to load a rom then update the 4ext version using the 4ext updater apk
View attachment 4024581
Robcr said:
Then i doubt you can do anything about changing your hboot until you have
Just concentrate on getting a working rom installed, i would suggest cm-7.2.0.1-bravo
To do that you may need to get a working recovery I couldn't get fastboot to install pretty much anything in that state.
See my recent posts on this including an older 'working' but faulty 4ext via PB99IMG.zip (dont clear any sd partitions with this - just use it to load a rom then update via 4ext app)
First step try the 'clear storage' (with no sd-card in) option from bootloader
If after that still nothing, and you have no recovery,
try the following which ended up the omly way I could get a working recovery installed:
http://forum.xda-developers.com/showpost.php?p=29427407&postcount=17
to get a working recoverr installed but DONT clear the ext partitions using this, just use it to load a rom then update the 4ext version using the 4ext updater apk
Click to expand...
Click to collapse
I couldn't do anything. So i research in xda and learn some fastboot command. I used this command to go to the recovery:
"fastboot boot recovery.img"
And then i flashed cm-7.2.0.1-bravo. After flashed, i rebooted to system but i faced ruu mode stuck again!!!!
So i type this command:
"fastboot boot boot.img"
Device Loads system and now:
When i try to open blackrose.exe, i face with this error: (Attached screenshot)
"Failed to check device model"
What should i do now????
glassofwiskey said:
View attachment 4024581
I couldn't do anything. So i research in xda and learn some fastboot command. I used this command to go to the recovery:
"fastboot boot recovery.img"
And then i flashed cm-7.2.0.1-bravo. After flashed, i rebooted to system but i faced ruu mode stuck again!!!!
So i type this command:
"fastboot boot boot.img"
Device Loads system and now:
When i try to open blackrose.exe, i face with this error: (Attached screenshot)
"Failed to check device model"
What should i do now????
Click to expand...
Click to collapse
Anyone??? Help

How to root Your MICROMAX IN1B (64GB)

First of all, before i start, I'll make this clear, i have done this procedure and rooted my IN1B successfully BUT if anything goes wrong with your device,
I WILL NOT BE RESPONSIBLE FOR BRICKED DEVICES
PreRequisites (Stuff you will need)
So, Let's get into it.
Before Begining, Here are the things you'll need :-
1. A windows PC with all the necessary drivers.
2. ADB and fastboot which you can get from here.
3. A USB C cable, preferably the original one.
4. Make sure your Device is atleast 60% charged.
5. Backup all your data because the very first step will reset your phone.
NOTE- MICROMAX DOES NOT PROVIDE ANY USB DRIVERS. So i had trouble finding the Drivers too, so i recomend you use "Driver booster" it's free, you can get it from here. After installing the driver booster, let it scan and then update all the drivers related to "Android" and "ADB".
That's it, once you are done with all the above points we are good to start.
These are the PATCHED files you need to flash to root your device.
1. Get the files from Here
After you download the files, copy and paste the files in the folder where ADB & Fastboot is located, if you have not changed the Install location, it should be at this directory- C:\Program Files (x86)\Minimal ADB and Fastboot
After you paste all the 3 downloaded files in the ADB folder, the process will now start.
Unlocking the BootLoader
The first step is to unlock the boot loader.
1. Connect your device with a USB C cable.
2. Enable USB debugging from the developer options-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Now run ADB and run this command- adb devices As you run this, something like this should appear on your mobile-
4. Now allow it and Voila!, you are now connected!
5. Now find "OEM Unlocking" and enable it.
6. Now enter this command- adb reboot bootloader As you run this command your device will reboot and show a black screen with only "fastboot" written on it.
7. Now finally Enter this command- fastboot flashing unlock
8. Now it will ask you to confirm, if you change your mind and dont want to root now, press the "Volume-Down" Button or if you want to root, press the "Volume-Up" button.
NOTE- UNLOCK MAY VOID SOFTARE WARRANTY. FOR DETAILS, CHECK THIS (Read 6e)
9. Awesome! Now you have unlocked your boot loader!!
Flashing the Patched Files
Now remember you need the 3 files i linked above, once you get them, paste them in the ADB folder.
Make sure you DON't change the file names.
Let's Start!
1. Run this command- fastboot flash boot patched_boot.img
2. After that, Run this- fastboot --disable-verification flash vbmeta vbmeta.img
3 And he final command, run this- fastboot flash recovery recovery.img
After all these 3 complete succesfully, Just run- fastboot reboot This will start your device normally, go on and set up your device.
1.As you complete the setup, you should see the magisk app-
2. Now the magisk app will ask you to install the full version, click on confirm and it will install the magisk app, you will have to turn on the "Unknown sources" option.
3. Once it is installed, you can ENJOY YOUR ROOTED IN 1B!!
IF YOU NEED ANY HELP, FEEL FREE TO WRITE IT BELOW, OR DM ME ON TELEGRAM- Âkio or DISCORD- Âkio#7134
Akahat27 said:
First of all, before i start, I'll make this clear, i have done this procedure and rooted my IN1B successfully BUT if anything goes wrong with your device,
I WILL NOT BE RESPONSIBLE FOR BRICKED DEVICES
PreRequisites (Stuff you will need)
So, Let's get into it.
Before Begining, Here are the things you'll need :-
1. A windows PC with all the necessary drivers.
2. ADB and fastboot which you can get from here.
3. A USB C cable, preferably the original one.
4. Make sure your Device is atleast 60% charged.
5. Backup all your data because the very first step will reset your phone.
NOTE- MICROMAX DOES NOT PROVIDE ANY USB DRIVERS. So i had trouble finding the Drivers too, so i recomend you use "Driver booster" it's free, you can get it from here. After installing the driver booster, let it scan and then update all the drivers related to "Android" and "ADB".
That's it, once you are done with all the above points we are good to start.
These are the PATCHED files you need to flash to root your device.
1. Get the files from Here
After you download the files, copy and paste the files in the folder where ADB & Fastboot is located, if you have not changed the Install location, it should be at this directory- C:\Program Files (x86)\Minimal ADB and Fastboot
After you paste all the 3 downloaded files in the ADB folder, the process will now start.
Unlocking the BootLoader
The first step is to unlock the boot loader.
1. Connect your device with a USB C cable.
2. Enable USB debugging from the developer options-
View attachment 5326971
3. Now run ADB and run this command- adb devices As you run this, something like this should appear on your mobile-
View attachment 5326979
4. Now allow it and Voila!, you are now connected!
5. Now find "OEM Unlocking" and enable it.
View attachment 5326983
6. Now enter this command- adb reboot bootloader As you run this command your device will reboot and show a black screen with only "fastboot" written on it.
7. Now finally Enter this command- fastboot flashing unlock
8. Now it will ask you to confirm, if you change your mind and dont want to root now, press the "Volume-Down" Button or if you want to root, press the "Volume-Up" button.
NOTE- UNLOCK MAY VOID SOFTARE WARRANTY. FOR DETAILS, CHECK THIS (Read 6e)
9. Awesome! Now you have unlocked your boot loader!!
Flashing the Patched Files
Now remember you need the 3 files i linked above, once you get them, paste them in the ADB folder.
Make sure you DON't change the file names.
Let's Start!
1. Run this command- fastboot flash boot patched_boot.img
2. After that, Run this- fastboot --disable-verification flash vbmeta vbmeta.img
3 And he final command, run this- fastboot flash recovery recovery.img
After all these 3 complete succesfully, Just run- fastboot reboot This will start your device normally, go on and set up your device.
1.As you complete the setup, you should see the magisk app-
View attachment 5326989
2. Now the magisk app will ask you to install the full version, click on confirm and it will install the magisk app, you will have to turn on the "Unknown sources" option.
3. Once it is installed, you can ENJOY YOUR ROOTED IN 1B!!
IF YOU NEED ANY HELP, FEEL FREE TO WRITE IT BELOW, OR DM ME ON TELEGRAM- Âkio or DISCORD- Âkio#7134
Click to expand...
Click to collapse
ON which android version u have done this given me firmware name
pankspoo said:
ON which android version u have done this given me firmware name
Click to expand...
Click to collapse
I did on the android 10 which it initially came with..

Question Can not boot any more

Hello comunity,
I installed TWRP on my Galaxy A72 to install Magisk but now I cant Boot any more. Please help my.
I hope you can help me. Moritz
Did you follow all the steps on the XDA thread?
If yes, it could be possible that you additionally need to flash services disabler
Moritz_pro said:
Hello comunity,
I installed TWRP on my Galaxy A72 to install Magisk but now I cant Boot any more. Please help my.
I hope you can help me. Moritz
Click to expand...
Click to collapse
Probably you flashed TWRP image at "fastboot boot TWRPLOL.img" this happens it . now do this,fastboot flash recovery YourTWRP.img then type fastboot reboot then Get your orginal boot.IMG from your Phone version's firmare folder by 7zip or winrar. then do fastboot flash boot boot.img then type fastboot reboot
hey Idk Who can help me for SPOOF(Change by random TEXT) Any android 5.1 to Android8's BASEBRAND Version and KERNEL Version ? How I can change it ? Phone ROOTED and XPosed module ready(not Virtual xposed) ? Please find it or Create new Xposed APK or SUPERuser(ROOT right) APK for Change BASEBRAND and Kernel Version,You know it writes under settings/about phone,Everything changing exclude these.Please Helpme,or if i can do this manually from which file /system or where ?
ineedstoplaggerwatchers said:
Probably you flashed TWRP image at "fastboot boot TWRPLOL.img" this happens it . now do this,fastboot flash recovery YourTWRP.img then type fastboot reboot then Get your orginal boot.IMG from your Phone version's firmare folder by 7zip or winrar. then do fastboot flash boot boot.img then type fastboot reboot
Click to expand...
Click to collapse
I'm not sure if I am understanding all what you are saying right, so please tell me more detailed so I dont't make it worse.
turn of ur phone by holding power button 15 second then wait and be sure phone will not try reboot,then
Press and hold the Power, Volume Down and Home buttons for seconds;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then the device will be the fastboot mode.
get this file then open it (Try open it by 7zip or winrar then extract it there),then click startCMD then type fastboot commands that i talked about it. but first type "fastboot devices" for be sure if it see your fastboot mode phone....... download this https://dl.twrp.me/a72q/twrp-3.6.2_11-1-a72q.img then rename it recovery(Right click on file then click properties and be sure if it says type of file: img file , so fullfile name must be recovery.img then put it into Adb&FastbootCommnderPrayForMe folder then enter this command "fastboot flash recovery recovery.img" then type fastboot reboot then remove cable quick,try power on ur phone, if it still stuck on boot then Poweroff by holding power button 15 second then 2 second later press power button by Volume Up Button together after 3 second later unpress power then continue holding volume up button,If twrp menu opened,swipe right adn go Wipe menu and ONLY chose Clear Cache , then restart phone . if still stuck then go Adb&FastbootCommnderPrayForMe folder and copy recovery.img file to same place and rename it boot(full file name must be boot.img), then go open command then type "fastboot flash boot boot.img" after enter it,Then type fastboot reboot and enter it. if still do same . then Find ur firmware's actual boot.img from your phone device model's firmare version File(firmware versions around 2GB to 10GB)'s boot.img . u can find it in internet too.Hope all works and i will be happy for u too
when I type Fastboot devices my Phone is not regionized what should I do?

			
				
Normally PC does not find your device as MTP device while you Hold POWER+home+volumeDown button(I mean fastboot mode without phone bootup).Coz it Shows device as MTP device after Phone bootedup(online).Maybe you tried install its driver as MTP by chosing manual install ? first download and install real usb driver(Adb&fastboot driver) of your samsung phone. https://developer.samsung.com/android-usb-driver then install it. then replug ur phone. Then go Device Manager of your PC,then replug your usb cable,and if you see New Device found like "unknow device or fastboot" then click them then click Properties on it, then click Update driver then click browse for Driver then click Let me pick from list then UNCHECK(unclick) "Show compatible hardware" then find your SAMSUNG ADB driver(if u cant see then click PORTS maybe it installed under Ports drivers) then click next to update it as Fastboot driver . but You can change your PC language to English for See same words in your Pc menus for I help you better coz im not German . but if already your secreen opens ? then you need go phone Settings / about phone/ Tap your phone Firm version 10 times and enable developer menu then enable USB ADB debug for install adb driver easily.if your phone screen not showing anything on screen . then you must just do fastboot mode by fastboot mode keys for install fastboot(samsung android usb driver or ADB driver another name)
When I am in the recovery mode then I see the MTP Window. When I am in the Download Mode I see the other window. I don't now waht the fastboot mode is.
Moritz_pro said:
When I am in the recovery mode then I see the MTP Window. When I am in the Download Mode I see the other window. I don't now waht the fastboot mode is.
Click to expand...
Click to collapse
Ignore what the other guy said above, fastboot is not a thing on Samsung phones. You can make it work with some patches however, but by default there is no fastboot.
ok can you tell me in detail so what do you think is the problem and wehre can I find these patches
Simon1511 said:
Did you follow all the steps on the XDA thread?
If yes, it could be possible that you additionally need to flash services disabler
Click to expand...
Click to collapse
There should be no issues if properly following the XDA thread's instructions.
Moritz_pro said:
ok can you tell me in detail so what do you think is the problem and wehre can I find these patches
Click to expand...
Click to collapse
Thank you for remaining me this option I forgot about it, but I installed a custom Rom, but I'd like to run again on the original software can I install it again. If not, it doesn't matter, but it would be better.
The Rom won't start, the start sign appears but doesn't finish loading.
[ROM][12.1][ENCRYPTION][EOL] LineageOS 19.1 for A52 4G and A72
LineageOS is a free, community built, aftermarket firmware distribution of Android 12.1/12L, which is designed to increase performance and reliability over stock Android for your device. LineageOS is based on the Android Open Source Project with...
forum.xda-developers.com

Categories

Resources