Develop Bugs

Connection to Bluetooth Stereo Headset is always lost

I am using 2 Bluetooth Stereo Headsets:
- HAMA Headset
- Jabra BT 620s.
Everything is working fine - stereo sound - alle functions on the headset buttons - although with different ROMs.
But there is always one small problem - when i have closed the BT conncetion and i try to reconnect automaticly the sound is on the speaker of the pda and not on my headset. Only when i manually reconnect the stereo headset, i get the sound over the headset.
Is there anywhone who solves this problem?

Ringtone only in headset,driving me nuts!

in my tp2 i noticed that when i have a wired or bluethooth headset conected and someone calls me it only rings in the headphones! this made me lose several phone calls.
in other devices i had , i used a reg hack for it to ring in the device speaker and headphone,so i tried in my tp2 but it does not work as the reg hack is related to the microsoft bluethooth stack.
therefore i m asking for help and also if other tp2 users can confirm this issue.
my bt heaset is a jabra bt3030.
thanks

I am having the same problem with my TP2, the headset becomes useless for this reason.
I use a Sennheiser MM-200 headset, bought this headset not to have earphones plugged in ears all time but only when i have incoming call.

Not sure what to tell you about the wired headset, but is your BT using the normal headset BT profile or is it connecting also with A2DP/Stero BT? That could be part of the problem.

In the Bluetooth menu it is connected with: "Stereo Audio" and "Hands-free"

you can switch off the stereo audio function and stay with the hans-free function only. it works fine, but you have to do it manually.
wolfgang

I made a soft reset and now the phone rings even with stereo audio enabled - whats good for me, but i do not understand why

Hi Faria,
There is a setting in the BT config to transfer "ALL" system sounds to the connected audio device, this may be your issue. I don't use a wired but my Rhodium rings in the headset and on the device after removing this option.
Cheers,
Beasty

I really hate this feature too. I am used to listening to music on my BT hedset. So when I get home I would just take them off, put the phone on my desk and go about my business. But if I don't disconnect the headset now I won't notice it ringing... which can lose in lost phone calls.
Hopefully someone will find a workaround.

Start>Settings>Connections>Bluetooth
First tab (gears)>Advanced>Audio
"Play system sounds on remote hands-free device" = uncheck
Just tested and works for me.
I get the normal ringtone from the phone and the regular "beep" from the stereo headset.
FYI, this is basically the same information as listed two posts up...

On my old phone if my headset was in and my phone rang it would say call from and state the persons name through my headset. The ringer itself wouldn't play through my headset nor the phone. And now I can't remember but I know it beeps in my ear but I think the phone plays the actual ringer also at the same time. But if I checkmark what you guys are unchecking will the actual ringer play through my plantronics bt headset and not on the phone.. I kind of would like that for if I am out and dont' want my phone to ring all loud I would rather the ringer play in my ear and was wondering if that's what happens when I check that. Mine was unchecked when I got the phone.. I don't havea bt headset I use for music just talking mostly when driving..

Fault with build in bluetooth audio router

I done a cold reset as thought this was my software build problem but the problem still remains so must be the bluetooth driver with the HTC touch pro 2/Rhodium
1) connect any mono bluetooth headset
2) under settings, you will see headset option to allow system sounds to go through bluetooth headset, tick this.
3) Now when the headset is in range any system sound will be routed to the bluetooth headset.
3) Run any app that uses the mic (Skype/VOIP/sound recorder)
4) The sound from the device will will be routed fine but you will notice that the mic from the bluetooth headset to device will not sound ok - the speed will be very fast like a robot.
If the bluetooth is making a standard phone call via the phone, it is perfect.
Anyone tried this and discovered this problem - is there a fix?

Anyone confirm this fault on their phone?

Fault when routing bluetooth system sounds
Hello,
I have this same problem again with my HTC Touch Pro 2 (and my bosses 10 months ago)
Anyone has a fix?
Thanks

[Q] Bluetooth audio question

Thanks to help from one of the members on here my bluetooth is now working fine for making/receiving calls.
However why does the audio from youtube app or tunein radio app not also come through my bluetooth device when paired and connected but instead through my HTC Desire loudspeaker?

Any one got any idea?

I'll try rephrasing the question.
Why doesnt a standard bluetooth in ear headset carry the full audio of my HTC Desire the way a pair of bluetooth headphones probably do and not just phone calls?

Either noone knows or the ones that do aren't seeing this thread.

I have Nokia BH-503 headset and I had the same problem. The calls would go through my headset, but everything else would play on the speaker. I noticed when I went to settings/Wireless & Networks/Bluetooth settings that my headset connects to phone audio, but not media audio.
I did some research and found a solution that works for me. I turn on the headset first, then bluetooth on my phone. Wait for a few seconds and that's that. My headset works perfectly and plays all audio from the device. When I go to settings, it says that the headset is connected to phone and media audio.
Try that and see if it works for you.

I'm only getting the option to use phone audio for some reason. I even tried switching my headset on first as you suggested.
My headset is a Nokia BH-102.
Any other ideas on how to get the media audio connected?

I think my bluetooth headset is just too crap to play media audio.

[Q] bluetooth mic not working

Hello, I just bought a bluetooth headset that supports both headset and a2dp mods.
I can listen to music fine.
And when i receive a call it switches to headset profile fine..
I can hear the call from earphones but..mic does not work.
I downloaded and tested with an application bluetooth mic tester and it was working fine in this application.
So no hardware problems with it.
What i suspect is, this headset doesnt have any pin code to pair devices..
You just discover the device and pair without any pins..
So, can it be a security issue not to enable microphone on calls?
And if so,
is there a way to change this behaviour, modiying a file etc on audio settings??
Thanks?