[Q] bluetooth mic not working - Samsung Galaxy W I8150

Hello, I just bought a bluetooth headset that supports both headset and a2dp mods.
I can listen to music fine.
And when i receive a call it switches to headset profile fine..
I can hear the call from earphones but..mic does not work.
I downloaded and tested with an application bluetooth mic tester and it was working fine in this application.
So no hardware problems with it.
What i suspect is, this headset doesnt have any pin code to pair devices..
You just discover the device and pair without any pins..
So, can it be a security issue not to enable microphone on calls?
And if so,
is there a way to change this behaviour, modiying a file etc on audio settings??
Thanks?

Related

An enigma...

I have a Helmi Broadcaom BT stac on my Universal. A day ago I 've bought a BT stereo headphones type Siemens HHB-750. It has function both HF and Hi-FI stereo ouput. The enigma is that the headphones works gerat as a stereo wireess, but I cannot put it to work as HF. When a call comes or when I dail a number I can hear from headphones a gently noise, but voice is still heard form Universal's speaker. I 've tried with another BT HF and I've got the same result, eg. Universal can detect the device, can connect itself with it, but during a call it cannot switch sound form bulid-in speaker to a BT headset working as HF. What to do?
Hi there, have you verified that you BT headphones have all their functions enabled in their profile?
Open the comm manager, Bluetooth settings, look for your phones (with the phones on, update the available services if needed), tap on all the services they suppose to have.
Hope it helps.
Alas not... I've activated all the function of my BT hHeadset ie. high quality stereo output and HF. The first function works great, the second one is still dead :-(((

Ringtone only in headset,driving me nuts!

in my tp2 i noticed that when i have a wired or bluethooth headset conected and someone calls me it only rings in the headphones! this made me lose several phone calls.
in other devices i had , i used a reg hack for it to ring in the device speaker and headphone,so i tried in my tp2 but it does not work as the reg hack is related to the microsoft bluethooth stack.
therefore i m asking for help and also if other tp2 users can confirm this issue.
my bt heaset is a jabra bt3030.
thanks
I am having the same problem with my TP2, the headset becomes useless for this reason.
I use a Sennheiser MM-200 headset, bought this headset not to have earphones plugged in ears all time but only when i have incoming call.
Not sure what to tell you about the wired headset, but is your BT using the normal headset BT profile or is it connecting also with A2DP/Stero BT? That could be part of the problem.
In the Bluetooth menu it is connected with: "Stereo Audio" and "Hands-free"
you can switch off the stereo audio function and stay with the hans-free function only. it works fine, but you have to do it manually.
wolfgang
I made a soft reset and now the phone rings even with stereo audio enabled - whats good for me, but i do not understand why
Hi Faria,
There is a setting in the BT config to transfer "ALL" system sounds to the connected audio device, this may be your issue. I don't use a wired but my Rhodium rings in the headset and on the device after removing this option.
Cheers,
Beasty
I really hate this feature too. I am used to listening to music on my BT hedset. So when I get home I would just take them off, put the phone on my desk and go about my business. But if I don't disconnect the headset now I won't notice it ringing... which can lose in lost phone calls.
Hopefully someone will find a workaround.
Start>Settings>Connections>Bluetooth
First tab (gears)>Advanced>Audio
"Play system sounds on remote hands-free device" = uncheck
Just tested and works for me.
I get the normal ringtone from the phone and the regular "beep" from the stereo headset.
FYI, this is basically the same information as listed two posts up...
On my old phone if my headset was in and my phone rang it would say call from and state the persons name through my headset. The ringer itself wouldn't play through my headset nor the phone. And now I can't remember but I know it beeps in my ear but I think the phone plays the actual ringer also at the same time. But if I checkmark what you guys are unchecking will the actual ringer play through my plantronics bt headset and not on the phone.. I kind of would like that for if I am out and dont' want my phone to ring all loud I would rather the ringer play in my ear and was wondering if that's what happens when I check that. Mine was unchecked when I got the phone.. I don't havea bt headset I use for music just talking mostly when driving..

[Q] Bluetooth audio question

Thanks to help from one of the members on here my bluetooth is now working fine for making/receiving calls.
However why does the audio from youtube app or tunein radio app not also come through my bluetooth device when paired and connected but instead through my HTC Desire loudspeaker?
Any one got any idea?
I'll try rephrasing the question.
Why doesnt a standard bluetooth in ear headset carry the full audio of my HTC Desire the way a pair of bluetooth headphones probably do and not just phone calls?
Either noone knows or the ones that do aren't seeing this thread.
I have Nokia BH-503 headset and I had the same problem. The calls would go through my headset, but everything else would play on the speaker. I noticed when I went to settings/Wireless & Networks/Bluetooth settings that my headset connects to phone audio, but not media audio.
I did some research and found a solution that works for me. I turn on the headset first, then bluetooth on my phone. Wait for a few seconds and that's that. My headset works perfectly and plays all audio from the device. When I go to settings, it says that the headset is connected to phone and media audio.
Try that and see if it works for you.
I'm only getting the option to use phone audio for some reason. I even tried switching my headset on first as you suggested.
My headset is a Nokia BH-102.
Any other ideas on how to get the media audio connected?
I think my bluetooth headset is just too crap to play media audio.

[Q] Headphones and Bluetooh Headset

I am sure this is not specific to the SGS3, but I swear this used to work with my S2.
My 2006 VW doesn't have an AUX input so I use one of the FM Transcievers. It works well.
But...I also use a bluetooth headset while driving.
What I want to happen is to be able to answer calls with my bluetooth headset. Right now while the FM thing is plugged into the headphone jack, the callers voice is sent over the headphone jack and on the stereo. It is as if my bluetooth headset is disabled while the headphone jack is used.
Is there any way to use the headphones to listen to music, but use the bluetooth headset for calls?
BTW, I am using PowerAmp.
Have you tried changing the order in which you connect the 2 devices. Try making sure you connect the transmitter before connecting the bluetooth headset. You may also need to edit the properties of the bluetooth headset and disable a2dp to prevent music from going to the headset. If all else fails, there should be a button during a call that you can use to switch between bluetooth, speakerphone, handset. Not ideal while driving, though.
One thing Android needs is a proper mixer control panel...
tmagritte said:
Have you tried changing the order in which you connect the 2 devices. Try making sure you connect the transmitter before connecting the bluetooth headset. You may also need to edit the properties of the bluetooth headset and disable a2dp to prevent music from going to the headset. If all else fails, there should be a button during a call that you can use to switch between bluetooth, speakerphone, handset. Not ideal while driving, though.
One thing Android needs is a proper mixer control panel...
Click to expand...
Click to collapse
Actually the Headset button is lit up on the in call screen, as if the bluetooth headset is connected for the call. Unfortunately it is still routing through the headset/handset mic.

[Q] SGH-I927 Bluetooth A2DP not working ?

So I just purchased my second Jabra Wave thinking I had a problem with the first one. I can connect my Captivate Glide with Android 4.0.4 version I927UCLJ3. It pairs and does work with a phone call however, the "A2DP" doesn't seam to work or I cannot find the correct place for settings. I want to stream my audio out to my mono Jabra Wave Bluetooth from music and things like my Pandora. I know both of the Jabra Wave headsets now do support it by using my wifes phone, pairing them and they play audio just fine and they both listed and both Jabra Wave part numbers I have say they support A2DP but no where in the phones menu settings can I find how to send the "music" audio to the bluetooth. I was also hoping the bluetooth mic would be able to be used for my voice to text engine. Has anyone gotten their audio routed to a mono bluetooth and if so, how did you send the audio to it?

Categories

Resources