Related
Ok I've flashed close to a dozen times using various great ROMS everyone has provided and never had a problem. Today I realized that ATT/HTC released their official ROM yesterday and I thought I would give it a try. I followed their instructions but it did not work.
My phone looked as though it was updating and it got stuck at 11%. Followed the instructions to recover and it still did not work. Now my phone is stuck at the Triple Color Bar screen and I cannot do anything.
Did I brick my phone?
Can I use some of the options to try to unbrick in the xda wiki?
Thank you in advance.
- Monty
Have you tried flashing a different rom or using a different pc to flash with?
i managed to revive mine from that state the key is getting the usb to let you update again dont plug in the cable until after the ruu is looking for the connection might take a couple tries but that worked for me.
Hi
Try this:
1) Turn your phone off completely
2) Hold the side OK button and the power button, at the same time push the reset button at the bottom with your stylus.
3) this should get you into the bootloader (the three colour screen)(dont be lazy and just let it load into the bootloader, actually run the key sequence ive just mentioned!)
4) on your PC run the update, i would reccomend the latest official update for your handset, BUT, do the following:
a) Make sure you have WinRAR installed
b) Right click on the update file you have just downloaded
c) 'Extract' the update file to the folder it makes
d) within that folder should be ANOTHER executable file that has the same icon as the original update
e) Extract this file again
f) open the folder it makes and within that there should be a RUUSIGNED.NBH and also the RUU utility itself
5) Run the update utility in the second folder
6) once the utility has loaded, plug your phone in (the text will change from 'SERIAL' to 'USB')
7) proceed with the update and see what happens
hope that helps
good luck.
MontyV77 said:
Ok I've flashed close to a dozen times using various great ROMS everyone has provided and never had a problem. Today I realized that ATT/HTC released their official ROM yesterday and I thought I would give it a try. I followed their instructions but it did not work.
My phone looked as though it was updating and it got stuck at 11%. Followed the instructions to recover and it still did not work. Now my phone is stuck at the Triple Color Bar screen and I cannot do anything.
Did I brick my phone?
Can I use some of the options to try to unbrick in the xda wiki?
Thank you in advance.
- Monty
Click to expand...
Click to collapse
You should not update using the Oficial ROM release Update because you put in the boot loader from here (Hard-SPL-V7) and it will try over righting the entire rom if you do and is probably what messed up your update attempt. Use Dutty's NBH tool and just decompile the NBH of the official rom, then recompile the windows, splash screens and radio into a new NBH then flash using the RUUwrapper from this site to flash the phone.
TooSharp said:
Have you tried flashing a different rom or using a different pc to flash with?
Click to expand...
Click to collapse
Yes I've tried two different Official ATT ROMs and on different computers but same problem. Actually the only one that will attempt to start loading are the ATT ROMs and none of the cooked ROMs here are loading. Maybe that has something to do with the way they are packaged.
Jefem24 said:
i managed to revive mine from that state the key is getting the usb to let you update again dont plug in the cable until after the ruu is looking for the connection might take a couple tries but that worked for me.
Click to expand...
Click to collapse
Yeah I've done this now over a dozen times since yesterday and still no luck.
duke_stix said:
Hi
Try this:
1) Turn your phone off completely
2) Hold the side OK button and the power button, at the same time push the reset button at the bottom with your stylus.
3) this should get you into the bootloader (the three colour screen)(dont be lazy and just let it load into the bootloader, actually run the key sequence ive just mentioned!)
4) on your PC run the update, i would reccomend the latest official update for your handset, BUT, do the following:
a) Make sure you have WinRAR installed
b) Right click on the update file you have just downloaded
c) 'Extract' the update file to the folder it makes
d) within that folder should be ANOTHER executable file that has the same icon as the original update
e) Extract this file again
f) open the folder it makes and within that there should be a RUUSIGNED.NBH and also the RUU utility itself
5) Run the update utility in the second folder
6) once the utility has loaded, plug your phone in (the text will change from 'SERIAL' to 'USB')
7) proceed with the update and see what happens
hope that helps
good luck.
Click to expand...
Click to collapse
This looked the most promising maybe because it felt like I was doing something and I was using the ATT ROM again to update, and it actually started updating again. But it stopped at 11% again and gave me the 262 error.
Below pulled from readme.txt file.
"ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode."
Click to expand...
Click to collapse
Tried to soft-reset and reinstall but same problem.
Scrambler001 said:
You should not update using the Oficial ROM release Update because you put in the boot loader from here (Hard-SPL-V7) and it will try over righting the entire rom if you do and is probably what messed up your update attempt. Use Dutty's NBH tool and just decompile the NBH of the official rom, then recompile the windows, splash screens and radio into a new NBH then flash using the RUUwrapper from this site to flash the phone.
Click to expand...
Click to collapse
Haven't yet tried this because I am having a hard time getting details on this. I've been searching looking for "duttythroy nbh tool", "nbh tool", "dutty nbh tool", and "dutty's nbh tool" and I can't find it.
If this helps anyone this is what I have on my tri-color screen:
HERM100
IPL - 1.04
HERM100
SPL - 2.03
Click to expand...
Click to collapse
You can also try to flash from the SD card:
- format a SD card with FAT32
- extract the .NBH file from the rom image you like (for your device of course)
- rename the .NBH to HERMIMG.NBH and copy it to your SD card
- put SD card in phone and start it in bootloader (hold OK button on left side and POWER button at same time and stick with stylus in RESET on bottom)
- confirm flashing on screen
- flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes.
This also works for normal (non preproduction) devices but keep in mind that if the CID does not match the flashing might not work. - this was taken from one old thread
- notes - you should backup everything on your SD card to your PC (because except for HERMIMG.NBH it should be blank)
- you can not get USB related error because it loads from a card
- if you flash official ROM you flash it with everything - radio ROM, Windows and bootloader
I am not really sure about bootloader you should have but for official upgrade official bootloader should be ok (it is first thing to be flashed - so I think you have bootloader from ATT ROM already.
Hope it can help somehow...
hey, what is your spl version?
it should say on your bootloader mode
and then read this http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
that really helps a lot, it has the solution and stuff. hope you unbrick your phone! all i did was download the update and it reloaded to wm5 update on my 8525 then after that, i went for olipro's 2.10 so i dont unbrick it anymore =) then flash all you want!
oh yea the factory update for my 8525 that unbricked my phone was this http://www.htcamerica.net/support/8525/software-downloads.html
try loading that in your phone =)
Ok that was the oddest thing but it worked. I've been trying to possibly unzip some of the packages by way of what duke_stix instructed. My last ROM was Schaps most recent 4.0. I unzipped what he had and ran the RUU file. What was funny though is that it started updating up to 3% then gave me the 260 error but this time my phone restarted and booted back up. I don't know what happen but it works now. If this is suppose to go in as a fix I don't know what happen.
Thank you everyone for all your help. I want to reflash my ROM but I will wait until I see this working for a while.
- Monty
asianr0cker said:
...i went for olipro's 2.10 so i dont unbrick it anymore =) then flash all you want!
Click to expand...
Click to collapse
How do I change my SPL to 2.10 now?
Here is nice tutorial how to flash HardSPL v7 (a.k.a. bootloader 2.10 Olipro). Glad to see you are out of brickland
KarhU said:
Here is nice tutorial how to flash HardSPL v7 (a.k.a. bootloader 2.10 Olipro). Glad to see you are out of brickland
Click to expand...
Click to collapse
Thank you just finished flashing it. Thanks again to all that helped.
MontyV77 said:
How do I change my SPL to 2.10 now?
Click to expand...
Click to collapse
See mrvanx.org
... Edit: That's what you get for waiting 10 minutes before posting. Doh!
Thank You So Much !
I did all pricedures and it worked perfectly. You are the best dude!
duke_stix said:
Hi
Try this:
1) Turn your phone off completely
2) Hold the side OK button and the power button, at the same time push the reset button at the bottom with your stylus.
3) this should get you into the bootloader (the three colour screen)(dont be lazy and just let it load into the bootloader, actually run the key sequence ive just mentioned!)
4) on your PC run the update, i would reccomend the latest official update for your handset, BUT, do the following:
a) Make sure you have WinRAR installed
b) Right click on the update file you have just downloaded
c) 'Extract' the update file to the folder it makes
d) within that folder should be ANOTHER executable file that has the same icon as the original update
e) Extract this file again
f) open the folder it makes and within that there should be a RUUSIGNED.NBH and also the RUU utility itself
5) Run the update utility in the second folder
6) once the utility has loaded, plug your phone in (the text will change from 'SERIAL' to 'USB')
7) proceed with the update and see what happens
hope that helps
good luck.
Click to expand...
Click to collapse
if its an official rom you may need to hard sol it first as i had the same problem updating to original after a chefs special
blowfeld said:
if its an official rom you may need to hard sol it first as i had the same problem updating to original after a chefs special
Click to expand...
Click to collapse
what is a hard sol and how do I do it? I wanna go back to the OEM Official ROM to see if it fixes my no service phone problems.
Ok, I've tried everything that was posted in this thread and nothing worked so far.
My last setup before trying to reinstall the Radio is:
AT&T 8525 (location - Hawaii)
Black Majik's WM6
Herm Radio 1.43.00.00
Hard SPL-V7
The OS has been working great until this previous Monday. Also just in case if this is any relevant, Hawaii has just recently upgraded and turned on it's 3G network just a couple of weeks ago. They are still tweaking the whole thing to make sure all is well. Unfortunately it seems that something they did this past Monday seemed to really screw up the 8525's.
The reason I'm trying to reinstall my radio is because I happened to go to the phone settings, and saw that there was no Radio version on the screen. Thought this might also add to the problem.
Well where I'm at now is that I'm stuck at the Tri-Color loader screen. I've read the Wiki regarding fixing a bricked phone. Doesn't seem to help.
So I'm now stuck and need expertise of more knowledgeable members who might have been in the same situation as me.
Please, really need help as this is a company phone and I've got to get it working cause I don't wanna have to pay for it.
Hello. Hopefully, my title was just interesting enough to draw the eye of someone who know much more than I about his custom ROM stuff. Please understand that I am sure that this issue and probably exact question has been asked countless times by the same dummy, like myself, with just enough knowledge to be dangerous. SO...forgive me...I've spent countless hours reading and trying to find an answer on my own but everyone seems to have a slightly different problem, or, have utilized different methods of creating their issue.I'll be brief and ask for someone to please spare a little time to help me resolve this. THank you
Bottom line is that I tried to flash 4.4.2 to my NoteII(sgh-t889). I booted into recovery and did something stupid. I think I loaded the .zip files from the SD card instead of through my PC. Anywho, the phone is now bootlooped with the Cyanogen logo and I can only access ODIN to try and flash a new and proper firmware version. I wiped dalvik and did a factory reset before flashing the new ROM bu I don't think that is relevant because I am quite sure that I didn't install properly.
0
I have looked EVERYWHERE for a downloadable .TAR file to flash with the stock firmware(4.1.2) ...even here(hotfile.com has apparently shut down and all links are a bust) and I am not even sure if that will fix the problem
If anyone is willing to take the time to guide me through the steps to reinstall the stock firmware, point me to alid links for necessary files, and get this thing up and running again, i'll promise to give up on mod'ing my device and just enjoy the hotspot use that I got from rooting the phone in the first place.
BTW...I made a backup using clockwork but I cannot access it.
THanks Again for reading and the anticipated responses. I am sure this is a breeze for most of you but for those of us trying for the first time and learning by internet, this can be a little confusing due to so many differing methods/software. Thanks again.
you can get stock firmwares for ALL samsung devices at sammobile. Search google to access the site. The directions on the webpage to download is pretty straightforward. After you have the appropriate file on your computer, go into odin( give administrator permision) and select the PDA( says CP in some versions) button and select the file you just downloaded. Now with your phone, go into download mode( power home voldown) and when you see an big android and a screen that says downloading , connect your phone to your computer running odin and click start. Wait about 5to10 mins and you will have a resetted phone with stock firmware. If youre stuck in a bootloop just do this again until it works.
Sent from my GT-I9300 using XDA Free mobile app
PodGom said:
you can get stock firmwares for ALL samsung devices at sammobile. Search google to access the site. The directions on the webpage to download is pretty straightforward. After you have the appropriate file on your computer, go into odin( give administrator permision) and select the PDA( says CP in some versions) button and select the file you just downloaded. Now with your phone, go into download mode( power home voldown) and when you see an big android and a screen that says downloading , connect your phone to your computer running odin and click start. Wait about 5to10 mins and you will have a resetted phone with stock firmware. If youre stuck in a bootloop just do this again until it works.
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Hello. Thank you so much for responding ad so quickly. I can't tell you how much it is appreciated. I probably dont have to explain how lost I feel without my phone.
I tried all instructions provided but I believe that I must have missing something. The file downloaded is a .zip file and I cannot flash a .zip file through ODIN...or can I???? I did not see any .TAR files or others that can be flashed. If there is a simple solution, please respond with what I am doing wrong or where a >tar file can be located that can be flashed through odin to reinstall the stock firmware. I am willing to try any method that will solve the problem. THank you all again for reading and the assistance.
Why not try to get a rom that is 4.3? Maybe you have firmware for 4.3. Otherwise the only thing I could think is that your firmware and rom version isn't matching. I've had it boot loop before and it was usually because mismatch in firmware and rom
Sent from my SGH-T889 using XDA Free mobile app
ShawnVin said:
Hello. Thank you so much for responding ad so quickly. I can't tell you how much it is appreciated. I probably dont have to explain how lost I feel without my phone.
I tried all instructions provided but I believe that I must have missing something. The file downloaded is a .zip file and I cannot flash a .zip file through ODIN...or can I???? I did not see any .TAR files or others that can be flashed. If there is a simple solution, please respond with what I am doing wrong or where a >tar file can be located that can be flashed through odin to reinstall the stock firmware. I am willing to try any method that will solve the problem. THank you all again for reading and the assistance.
Click to expand...
Click to collapse
ok. I think you downloaded the wrong file. here are the elaborated assistance you might need.
1. go into this link : http://www.sammobile.com/firmwares/1/
2. register or log in to the sammobile website.
3. you should have a black box that says <select your firmware> with a bunch of words in it. on the top right of that box, you'll see a box that says <Search device here...> enter you device name(SGH-T889) in that box and you will see your device firmware there. download the software version(android version) you want and press download. you'll have a zip file. you need to extract the zip file, and there'll be an odin flashable file.
*note: download is probably reeeeaaallly slow, so go have a cup of coffee. good luck!
after you've got the file on your computer, follow these instructions:
1. Extract (unzip) the firmware file
2.Open Odin
3.Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
4.Connect phone and wait until you get a blue sign in Odin
5.Add the firmware file to AP / PDA
6.Make sure re-partition is NOT ticked
7.Click the start button, sit back and wait a few minutes
hi guys, i wrote here because all links are expired. i have a very big problem with my ace 2 because it is in loop at the logo screen. it's happen when i tried to root the phone with odin. i tried and tried with the same file and with other files: rom, kernel etc.. but the result is the same.
someone can help me?
Desmojack said:
hi guys, i wrote here because all links are expired. i have a very big problem with my ace 2 because it is in loop at the logo screen. it's happen when i tried to root the phone with odin. i tried and tried with the same file and with other files: rom, kernel etc.. but the result is the same.
someone can help me?
Click to expand...
Click to collapse
Is it the Android boot screen (i.e. Samsung/Cyanogenmod) or the Bootloader screen, that shows up first thing no matter which ROM you have?
-Bhavesh
bhaveshparajapat said:
Is it the Android boot screen (i.e. Samsung/Cyanogenmod) or the Bootloader screen, that shows up first thing no matter which ROM you have?
-Bhavesh
Click to expand...
Click to collapse
I started with the stock rom, and i didn't be able to install new roms because at the first flash for root permission with odin, my phone restart with the loop. and the new files i flashed with odin gave me the same loop.
now, i think that the only solution is reset all. where is the right link? active link!
Yup
Desmojack said:
now, i think that the only solution is reset all. where is the right link? active link!
Click to expand...
Click to collapse
I think so too. Try using a three part firmware, I can't just provide the .pit because you'll need the modem file too.
Try using a three part firmware if a single file one doesn't work
Odin Single File = i8160XXXXX.tar.md5 which goes in PDA
Odin Three part = Modem, PDA and PIT (This repartitions your device back to factory so you'll lose all data and partition changes you've made!!))
--Bhavesh
yes,this is a good idea..but where i can find the three files for back to factory ?
Desmojack said:
yes,this is a good idea..but where i can find the three files for back to factory ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2340849
The XXMF1 firmwares might have all three files. I don't know but from what I can collect it seems to be the most likely. The test XXMC8 and MB4 firmwares also contain three files, but, they're test firmwares, so I wouldn't recommend it - and you should flash stable firmware afterwards (after the phone reboots and you see the 'PASS' message on the computer and the phone has started to boot)
Good luck!
i'm very stupid... the only problem was battery low.. tnx anyway!
Desmojack said:
i'm very stupid... the only problem was battery low.. tnx anyway!
Click to expand...
Click to collapse
No problem! Try not to flash if you have less than 70% or so battery left as a general rule
Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, After successfully rooting my new tablet I decided to make a back up of my stock system, I used TWRP recovery to do so, after booting successfully on TWRP, I wanted to make sure I will have a clean image, I manually erased every possible thing on my table by selecting every option on TWRP, once done and on my way to reboot, before quitting TWRP warn me that there wasnt any system, and even with this warning I quit. Result I bricked my tablet hopefully "soft", to get even better I remembered that I didnt had a micro sd card on my tablet and by consequence I must have erase TWRP and every possible restore solution, the table get stuck with the Boot logo and thats it... I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use or what to install or what to do. And I don't get it why my program seems so buggy and I can´t select any of those options.
at least I could root my phone easily.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seriously cant thank you enough I googled around and did search a lot on the XDA forums, I'm now more scared to tweak around and make things worst , and maybe if not to late permanently dammage it.
lleresche said:
Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, I mannaged to root my device before usb debugging was on all good tablet was perfect etc... And than I did the stupidest thing ever... I installed TWRP Recovery and in order to make a clean back up of my system I selected Wipe out everything.... So the big problem is that after I manually selected every option System etc... can´t remenber but I do know I did wipe out EVERY SINGLE THING, And I did exit even receiving a WARNING you dont have a SYSTEM.... and I did yes quit.... Than to find myself stuck on the samsung logo and being totally blocked since than, I discovered with regret that I actually DIDNT had a Micro SD card and I did wipe out everything including the Restore program if Im getting it right.... I dont know if its already to late and I can go cry on a corner for waisting 500$ in 2 days or is there anything I could do ???, I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use my Zip unofficial downloaded rom and install. And I dont get it why my programm sems so buggy and I can´t select any of those options.
at least I could root my phone easyly.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seryouslly cant thank you enough I googled around and did search a lot on the XDA forums, Im now more scared to go depeer and maybe if not to late permanently dammage it.
Click to expand...
Click to collapse
Hi have you read this thread. http://forum.xda-developers.com/galaxy-tab-s/help/to-event-soft-brick-disaster-t2838473
maxal said:
Hi have you read this thread.
Click to expand...
Click to collapse
Hey maxal, thx for replying, my English is really not the best, if you think its not understandable I will re edit and try again.
You will need to find and download your firmware from Sammobile http://www.sammobile.com/firmwares/database/SM-T800/BTU/
and use odin to reflash your stock firmware.
Read this too. http://theunlockr.com/2014/08/09/how-to-unroot-the-samsung-galaxy-tab-s-10-5-wifi/
TURNING THE DARNED THING OFF:
Here's the problem. If you are at the Samsung splash screen or boot looping Recovery, you cannot turn your tablet off by just pressing the power button and you can't pull the battery. This prevents you from getting back into Recovery or download mode to restore your nandroid backup or use Odin
So here is what you do:
1) Plug your tablet into your computer (this is important!).
2) Hold down the home, volume down and power buttons until you boot into download mode. Once you are prompted, push the volume up button to enter download mode completely.
3) Now, once in download mode, hold down the power and volume down buttons (not the home button this time) until you screen goes blank (your tablet MUST be plugged into your computer for this to work!). Release the buttons and you will see the battery symbol on your screen. Your tablet is now off - thank god.
4) To enter Recovery mode, hold the home, volume up and power buttons down until Recovery loads.
5) Restore your nandroid backup if you have one.
maxal said:
You will need to find and download your firmware from Sammobile http://www.sammobile.com/firmwares/database/SM-T800/BTU/
and use odin to reflash your stock firmware.
Click to expand...
Click to collapse
Thank you so much Maxal I will do it so, indeed the text was terribly written I tried to make it better and more understandable, I read that actually Kies was the way to go for flashing back a bricked device, and odin was actually a risky thing, is that right ?
lleresche said:
Thank you so much Maxal I will do it so, indeed the text was terribly written I tried to make it better and more understandable, I read that actually Kies was the way to go for flashing back a bricked device, and odin was actually a risky thing, is that right ?
Click to expand...
Click to collapse
I believe kIes is for stock unrooted devices and Odin is for rooted devices, I may be wrong. I did get my self in a mess and I was stuck on the Samsung logo and with the help of the forum and what I have told you I managed to get my Tab S to turn off, I then boot in to download mode and used Odin to flash stock firmware again
all right almost done downloading the firmware, could you give me the tutorial you followed for bringing your tablet back to life ? or any good tutorial, Helping me to get out
thx again
lleresche said:
all right almost done downloading the firmware, could you give me the tutorial you followed for bringing your tablet back to life ? or any good tutorial, Helping me to get out
thx again
Click to expand...
Click to collapse
Ok, read my second post I have added a second link for you, follow the unroot instructions.
maxal said:
Ok, read my second post I have added a second link for you, follow the unroot instructions.
Click to expand...
Click to collapse
Got it super cool, wish me luck going for it. I write later if I succeed
Good luck :good:
maxal said:
Good luck :good:
Click to expand...
Click to collapse
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
lleresche said:
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
Click to expand...
Click to collapse
I don't know which firmware you should have as I don't know where you are from, but I don't think it should make much difference, the firmware I gave the link for is the UK one.
Maybe someone else can help with a link for the correct firmware for you.
lleresche said:
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
Click to expand...
Click to collapse
Is your model the galaxy tab s 10.5 wifi? Also what country did you get yours tab s
DUHAsianSKILLZ said:
Is your model the galaxy tab s 10.5 wifi? Also what country did you get yours tab s
Click to expand...
Click to collapse
I got from Germany I downloaded the newest from Germany, I flashed with Odin, and my tablet IS BAACK TO LIFE!!!!. I will now root again and install a custom rom properly. thank you very much everybody, for a second I really tough I trowed 500$ on the bin :laugh:
lleresche said:
I got from Germany I downloaded the newest from Germany, I flashed with Odin, and my tablet IS BAACK TO LIFE!!!!. I will now root again and install a custom rom properly. thank you very much everybody, for a second I really tough I trowed 500$ on the bin :laugh:
Click to expand...
Click to collapse
Well done, and now that you have a copy of your firmware should you have any problems in the future
lleresche said:
Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, After successfully rooting my new tablet I decided to make a back up of my stock system, I used TWRP recovery to do so, after booting successfully on TWRP, I wanted to make sure I will have a clean image, I manually erased every possible thing on my table by selecting every option on TWRP, once done and on my way to reboot, before quitting TWRP warn me that there wasnt any system, and even with this warning I quit. Result I bricked my tablet hopefully "soft", to get even better I remembered that I didnt had a micro sd card on my tablet and by consequence I must have erase TWRP and every possible restore solution, the table get stuck with the Boot logo and thats it... I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use or what to install or what to do. And I don't get it why my program seems so buggy and I can´t select any of those options.
at least I could root my phone easily.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seriously cant thank you enough I googled around and did search a lot on the XDA forums, I'm now more scared to tweak around and make things worst , and maybe if not to late permanently dammage it.
Click to expand...
Click to collapse
Sir please let me know exactly what you can take on your tablet Download mode for use Odin? I do not understand it well from the description of your problem.
PS: Sorry, but my this question was asked late. I see that already it isn't actual.
porcelana said:
Sir please let me know exactly what you can take on your tablet Download mode for use Odin? I do not understand it well from the description of your problem.
Click to expand...
Click to collapse
Hey Porcelana, I basically bricked my new Tablet, I was only able to acces Download mode, (Odin mode) I than Used Odin 3.09 from my computer to flash my device again.
The issue is fully solved and my tablet is back to life. thank you all again
lleresche said:
Hey Porcelana, I basically bricked my new Tablet, I was only able to acces Download mode, (Odin mode) I than Used Odin 3.09 from my computer to flash my device again.
The issue is fully solved and my tablet is back to life. thank you all again
Click to expand...
Click to collapse
OK, Thanks.
But please keep in mind for the future that the load to your Tab better the original firmware that corresponds to its original CSC Region code. This can help you avoid some of the problems in the firmware flashing. How it may be defined, you can read in this thread:
http://forum.xda-developers.com/galaxy-tab-s/help/how-to-select-correct-firmware-tablet-t3016068/post58500430
Regards
porcelana said:
OK, Thanks.
But please keep in mind for the future that the load to your Tab better the original firmware that corresponds to its original CSC Region code. This can help you avoid some of the problems in the firmware flashing. How it may be defined, you can read in this thread:
http://forum.xda-developers.com/galaxy-tab-s/help/how-to-select-correct-firmware-tablet-t3016068/post58500430
Regards
Click to expand...
Click to collapse
Hi Porcelana, Can you tell me can you use Kies to down load firmware if you are on a rooted rom?
maxal said:
Hi Porcelana, Can you tell me can you use Kies to down load firmware if you are on a rooted rom?
Click to expand...
Click to collapse
Hi maxal,
Download via KIES will not check root If you do not connect the tablet to a PC. It only checks the serial number and model type of your Tab for search new updates firmware with determine the correct CSC Region code. You can even download the correct firmware by KIES to your PC without having to connect the tablet and then save the file firmware (this requires some tricks) and flash it via Odin. To do this, you need only enter the serial number and model type of the device in KIES menu Tools -> Firmware Upgrade and Initialisation. More details have here:
http://forum.xda-developers.com/showpost.php?p=58527780&postcount=5
In this case you no need connect the tablet to PC. It also confirms ashyx here:
http://forum.xda-developers.com/showpost.php?p=58535945&postcount=7
Regards
I have a very strange problem with this device (g920p), Backstory: i got it with the screen broked so i replaced it. There was no problem until the sound stopped working. I pressed vol - and power button but it never came to life.
What i did / Result:
Hard Reset (wipe cache and data, cache partition). / Same status Softbricked
Installed custom recovery and wiped out caches dalvik. / Still Bricked
Download and installed stock ROMS: CPD2, CPB6 (6.0.1) / After the odin procedure, it reboots and then it updates system, later says "optimizing apps" and when finish the phone stucks at "Starting Apps" (for hours) and it never starts. If i reboot it, after the samsung logo it just shows blue light blinking but the screen stays black.
I have downgraded to almost all 5.1.1 ROMS / Same result as above.
I have installed almost all ROMS after wipes (with stock recovery and custom) / no sucess.
I have tried to recover it with Smart Swich but i cant get the s/n, barcodes only shows MEID but no serial.
I have left the battery die then i do all the previuos trys with no sucess, i can just get to "Android is Upgrading - starting apps" screen.
I have tried installing custom kernels after rom installs / NO luck.
Safemode does nothing.
Any clues to get my s6 back to life?
If it's the 32gb version, I recommend flashing the pit file found in the general section.
Sent from my SM-G920P using Tapatalk
elesbb said:
If it's the 32gb version, I recommend flashing the pit file found in the general section.
Sent from my SM-G920P using Tapatalk
Click to expand...
Click to collapse
Yep its the 32gb varient, i cant locate the pit file.
elesbb said:
If it's the 32gb version, I recommend flashing the pit file found in the general section.
Sent from my SM-G920P using Tapatalk
Click to expand...
Click to collapse
i found "ZEROFLTE_USA_SPR.pit" and i got the same result, shows the samsung logo then the screen goes black, it stucks at Starting apps screen.
pablitokio said:
i found "ZEROFLTE_USA_SPR.pit" and i got the same result, shows the samsung logo then the screen goes black, it stucks at Starting apps screen.
Click to expand...
Click to collapse
You need to make sure you are flashing the proper stuff. You can't just go throwing random sh*t at it.
This is the proper PIT for your device: https://www.androidfilehost.com/?fid=24499762636008230
If you were to look through the thread, specifically the general section, as I mentioned, you would have found it
Flash the PIT file by selecting "PIT" inside odin and NOTHING else. Then reboot and flash the stock tar.
elesbb said:
You need to make sure you are flashing the proper stuff. You can't just go throwing random sh*t at it.
This is the proper PIT for your device: https://www.androidfilehost.com/?fid=24499762636008230
If you were to look through the thread, specifically the general section, as I mentioned, you would have found it
Flash the PIT file by selecting "PIT" inside odin and NOTHING else. Then reboot and flash the stock tar.
Click to expand...
Click to collapse
Thanks a lot, i did look for it and found the other one. After flashing the PIT i flashed the .tar (CPB6) and the result was the same, blackscreen with blue light dimming intermitent. This time the "optimizing apps screen" didnt show up. i havent touched the device yet, im waiting for the optimization screen to show up. Im waiting 30min if it doesnt works im gonna reboot the device and do the wipes and reboot.
elesbb said:
You need to make sure you are flashing the proper stuff. You can't just go throwing random sh*t at it.
This is the proper PIT for your device: https://www.androidfilehost.com/?fid=24499762636008230
If you were to look through the thread, specifically the general section, as I mentioned, you would have found it
Flash the PIT file by selecting "PIT" inside odin and NOTHING else. Then reboot and flash the stock tar.
Click to expand...
Click to collapse
Didnt work but i realized now it has no IMEI or MEID.
pablitokio said:
Didnt work but i realized now it has no IMEI or MEID.
Click to expand...
Click to collapse
Let it die completely. Once it dies attempt to boot into download mode until it wont anymore (completely dead), charge to about 15%, reboot. Should be fixed. If not retry. What happened I think is the minute reboot with no signal/baseband/imei etc., except you flashed a rom or something to try to fix it so now it appears to bootloop but really is doing the same minute automatic reboot no signal issue. I had same happen to me when i flashed a rom trying to fix it, it "bootlooped", but being the first boot taking the standard additional time it never made it to the full boot up, until letting it die, then all was good. Nothing else is needed except complete drain of battery
droseofc said:
Let it die completely. Once it dies attempt to boot into download mode until it wont anymore (completely dead), charge to about 15%, reboot. Should be fixed. If not retry. What happened I think is the minute reboot with no signal/baseband/imei etc., except you flashed a rom or something to try to fix it so now it appears to bootloop but really is doing the same minute automatic reboot no signal issue. I had same happen to me when i flashed a rom trying to fix it, it "bootlooped", but being the first boot taking the standard additional time it never made it to the full boot up, until letting it die, then all was good. Nothing else is needed except complete drain of battery
Click to expand...
Click to collapse
Thank you im gonna try this for sure. I have worked all day long with this device. and i am not giving up until it totally die or work.
UPDATE (Battery not drained yet):
I realized about some things when i flash the stock rom, after odin finish the phone shows a screen that says "updating system" a progress bar loads but only reaches to 32% then says Erasing and reboots, then just hangs at "starting apps" screen.
Same result as previous ones. Stucked at "Starting Apps". After the flash .pit file, i flash the .tar, then when finish the devices reboots and the screen shows a progress bar that reads "Installing system update" but it only reaches to 32%.
That is odd. Did the sound ever come back? Maybe it has something to do with the hardware fix. Wherever you got the replacement from were there any reviews that may indicate others having similar issues or contacting whoever u got it from? If the sound stopped working and then you reset it and etc and now its not booting fully up maybe it does some type of hardware check and reboots if and when it fails.. idk truthfully, if it were me Id go back to looking at the screen replacement
i'll try doing all the previous steps but with the original screen. i'll update the post ASAP
My g920p got exactly the same problem. It die for 2 weeks. I try every thing i can but it can't get out of "starting apps". So i place it in my desk until today i boot it up and actually, it start. Still have no sound, but when it check for update and i press update now, the "starting apps" loop show up. Have you fixed your phone yet?
Sorry for my bad English.
It looks like you really did a number on it!
Good Luck!
Help
Does anyone have the same problem???
Samsung S6- G920P impossible to Fix
Had same problems with my G920P and nobody even replied to my cry for help....thanks guys! No really,without help i had to learn the hard way. Anyways, I flashed the Pit file then flashed a boot file, then a modem file, then last but not least the complete Home tar. Let me know if this works for you. According to my G920P it took me 48 days, and very long nights to get it back up and running. Hard bricked a Galaxy S7 in the process........next project i guess!
Samsung S6- G920P impossible to Fix
Had same problems with my G920P and nobody even replied to my cry for help....thanks guys! No really,without help i had to learn the hard way. Anyways, I flashed the Pit file then flashed a boot file, then a modem file, then last but not least the complete Home tar. Let me know if this works for you. According to my G920P it took me 48 days, and very long nights to get it back up and running. Hard bricked a Galaxy S7 in the process........next project i guess! Having trouble uploading those files to you but i will get them out tonight. By the way, theyre PI3 files. i was on PB6 but the only thing that worked was to bump up a couple versions.
Mrm35150 said:
Had same problems with my G920P and nobody even replied to my cry for help....thanks guys! No really,without help i had to learn the hard way. Anyways, I flashed the Pit file then flashed a boot file, then a modem file, then last but not least the complete Home tar. Let me know if this works for you. According to my G920P it took me 48 days, and very long nights to get it back up and running. Hard bricked a Galaxy S7 in the process........next project i guess! Having trouble uploading those files to you but i will get them out tonight. By the way, theyre PI3 files. i was on PB6 but the only thing that worked was to bump up a couple versions.
Click to expand...
Click to collapse
bro, im having the same problem, can u elaborate step by step how you did it?
RadarZgin said:
bro, im having the same problem, can u elaborate step by step how you did it?
Click to expand...
Click to collapse
I will get the files together and get them to you
Mrm35150 said:
I will get the files together and get them to you
Click to expand...
Click to collapse
thanks bro