Related
why my SGW keep restarting & shown battery again and again....i already flash follow each step given( more than 10 times )...but still got same problem...is aother way than sent it back to service center...PLEASE HELP ME!
Have you already pass the Samsung Logo and then restart or
Never pass the Samsung logo or restart and event shown charging icon but you are not charge it
Is your answer is no. 2
Then go to SCS
krulelina said:
why my SGW keep restarting & shown battery again and again....i already flash follow each step given( more than 10 times )...but still got same problem...is aother way than sent it back to service center...PLEASE HELP ME!
Click to expand...
Click to collapse
What did u flash? Can u enter recovery mode? else try going to download mode and use Odin to flash again.
thank for reply
i already try both of them...doest work at all, odin & recovery mod...both of them i already try....weird doh!!! bcoz b4 this my ace when i had problem i just flas with odin...it work...but now....worse!!! by the way thanksss man!!!
samsung logo
hi rio,my unser is no1......thanks...
Did you wipe dalvik cache, do factory reset.
Sent from my GT-S5830 using XDA
krulelina said:
doest work at all
Click to expand...
Click to collapse
DOES or DOES NOT ?
If possible, than try(AT YOUR OWN RISK!!!) to flash CWM(ClockWorkMod) via ODIN and than (do a backup before that!!!) do a full wipe. After that is done, enter Download mode and flash again.
greets
THE-E
how???
i already flash with odin...it not working, same as recovery mode not working too, coz i already flash cwm but nothing happen it came out with samsung logo & battery...
yeah i know the only way is by that both step...but this is weird...i cant do anything with that steps guys...
krulelina said:
i already flash with odin...it not working, same as recovery mode not working too, coz i already flash cwm but nothing happen it came out with samsung logo & battery...
yeah i know the only way is by that both step...but this is weird...i cant do anything with that steps guys...
Click to expand...
Click to collapse
As already suspected, this is probably a defect of mainboard. You will have to send it to Samsung Service Point. This could still be a warranty case, but from here on only Samsung can help you.
greets
THE-E
Can you enter into cwm recovery mode. If you can then I don't think there s way. Coz it'll show you tat you've rooted ur phone. If you can't then go to service center and pretend to them that you haven't even heard the word root in your whole life. Tel them that you just tried to update thru kies nd it got bricked. No other way my friend.
Sent from my GT-S5830 using XDA
Note- your phone shd be within warranty period. Then it'll be replaced. I haven't done tis. But, heard from guys who did it.
Sent from my GT-S5830 using XDA
thanks all...
yeah i guess i'll go scs...that the only ways...thanks a lot xda & xda friends.
Rio Saputro said:
Have you already pass the Samsung Logo and then restart or
Never pass the Samsung logo or restart and event shown charging icon but you are not charge it
Is your answer is no. 2
Then go to SCS
Click to expand...
Click to collapse
krulelina said:
hi rio,my unser is no1......thanks...
Click to expand...
Click to collapse
Just for Rio.....please
Is there some other reason, as answer was No.1
Have you already pass the Samsung Logo and then restart
Click to expand...
Click to collapse
Just for clarity, does krulelina need to return his Wonder to SCS??
If not, what is the solution?
Thanks a million!!
irishpancake said:
Just for Rio.....please
Is there some other reason, as answer was No.1
Just for clarity, does krulelina need to return his Wonder to SCS??
If not, what is the solution?
Thanks a million!!
Click to expand...
Click to collapse
What I see is that she's not having problem with bricking phone, so.. no need imo..
She just need to reflash... I believe she got wrong package when flashing? Like broken package.
Try checking http://www.samfirmware.com/
get a stock rom of your country / other, and reflash it with correct settings...
That should do it
I8150olbkl1...
i download the firmware from samfirmware, its impossible its if the firmware broken or something, and i already do a correct steps, and i know how to flash guys , just dont understand why this still could happend, maybe mainboard problem or the battery?
but im planning to sent it scs tommorow! thanks a lot
krulelina said:
i download the firmware from samfirmware, its impossible its if the firmware broken or something, and i already do a correct steps, and i know how to flash guys , just dont understand why this still could happend, maybe mainboard problem or the battery?
but im planning to sent it scs tommorow! thanks a lot
Click to expand...
Click to collapse
Aahh... maybe it is your device's destiny...
Hopefully your device recovers fast soon..
irishpancake said:
Just for Rio.....please
Is there some other reason, as answer was No.1
Just for clarity, does krulelina need to return his Wonder to SCS??
If not, what is the solution?
Thanks a million!!
Click to expand...
Click to collapse
Hi Irish..
Sorry for late response
I'm not going to get everybody afraid but want to make them AWARE
Basically i wanna explain more about the "BRICKING"
There are soft brick and hard brick
SOFT BRICK
Soft brick cause by bad installation :
Corrupted file
Bad flashing way
Power off while flashing
Soft brick will cause the phone wont load the OS, the characteristic are
After booting, couldn't load OS after the logo shown and keep the screen blank
After booting and get into OS, suddenly system crash and reboot
You can go thru reboot mode and download mode
This issue can be fixed by re-flashing your phone
Click to expand...
Click to collapse
HARD BRICK
Hard brick cause by:
Broken Hardware
Very-very wrong way of flashing
What really cause this ?
It's the damaged "ADB Interference Driver" that caused the device cannot give any command to system. In example your device wont reboot after flashing although ODIN has sent reboot command
Click to expand...
Click to collapse
The characteristic are:
If your hardware damaged, your system will crash all over the time meanwhile you already re-flash but it cannot fixed
Your device have a boot loop and unable to go to recovery mode
Hah.. very wrong way flashing ?
Some device (Galaxy Ace & Galaxy 3 Apollo) have firmware that included with automatically system/data/cache format. They will not experience* this hard brick because the firmware doing cleaning before flashing
Sometime user not aware of this
They just go right away then flashing, this can cause hard brick
Click to expand...
Click to collapse
How about Wonder ?
No, wonder firmware not included this command so you must clean data/system/cache first
Click to expand...
Click to collapse
How to fix this hard brick ?
Until now i didn't get any way to fix it, because it linked to damaged "ADB Interference Driver" so you cannot use any command in your device
It this happen you should go to Samsung Service Center
How to Flash Correctly (Custom ROM)
Make a full back up of your device & apps
Do full wipe on data/system/cache
Flash your latest stock ROM
Get Root access & CWM Recovery
Download your ROM correctly make sure not get corrupted
Make sure to copy it to primary SD card (no need to swap)
Make sure you have 85-100 battery or in charged with 85-100 power available
Click to expand...
Click to collapse
I hope it help
Download your ROM correctly make sure not get corrupted
Rio, is there any way to check it?
yewsiong said:
Download your ROM correctly make sure not get corrupted
Rio, is there any way to check it?
Click to expand...
Click to collapse
Yes, if the uploader publises a MD5 checksum. Than you, as downloader, will be able to check the MD5 checksum of the downloaded file.
If not available I think all you can do to minimize the chance of not getting a corrupted file is by checking the size of the downloaded files and the one which is displayed at the filehoster. Other option would be to download the file twice and compare the MD5 checksum of the both files. if they are same everything is fine, if not ...
greets
THE-E
THE-E said:
Yes, if the uploader publises a MD5 checksum. Than you, as downloader, will be able to check the MD5 checksum of the downloaded file.
If not available I think all you can do to minimize the chance of not getting a corrupted file is by checking the size of the downloaded files and the one which is displayed at the filehoster. Other option would be to download the file twice and compare the MD5 checksum of the both files. if they are same everything is fine, if not ...
greets
THE-E
Click to expand...
Click to collapse
I learned Cryptography System before. I know the function of Md5 check sum. It is a "digest" of host file. BUT it can only check the integrity of the file. If the original file has already corrupted before making its md5, u won't know anyway.
Ok this kind of problem i haven't seen. I've searched the whole interweb for someone with problem like this.
So. I had restored my phone and setting back to factory settings. Then i downloaded a file manager (ASTRO). The application was running and i locked the phone. I tried to unlock but it did not recognize. Then i tried different buttons everything worked, i just couldnt see anything from the screen.So i removed the battery and tried to reboot. it vibrated normally but nothing on the screen. I waited for couple of hours and THERE! it booted. But little later it did it again. When it does it i press the power button to lock it and the screen flashes. it can only be seen in the dark. It did that many times. I've used update service and i have updated the phone like ten times but still the same. I found out the bootloop by booting it and then plugging it to computer. The computer recognizes it but then i hear the usb removing sound. THE PHONE DOESN'T EVEN BOOT TO THE "Sony Ericsson" SCREEN. I've flashed 4.0.2.A.0.58_EnhancedV2.ftf but it has the same problem. then i flashed 4.0.2.A.0.42_Generic_UK.ftf (4.0.2.A.0.42 is stock) but no. phone is rooted and has custom recovery and bootloader unlocked. This is strange.. never seen this kind of problem. I thought it was some application that causes this but flashing wipes all data, right?
Thanks already. You are better with these than me.
what kind of kernel did u used ?
try flash kernel using stock kernel.
jiprudy said:
what kind of kernel did u used ?
try flash kernel using stock kernel.
Click to expand...
Click to collapse
4.0.2.A.0.58_EnhancedV2.ftf. It was the first one i flashed. Is there a link for stock (4.0.2.A.0.42)?
nomad- said:
4.0.2.A.0.58_EnhancedV2.ftf. It was the first one i flashed. Is there a link for stock (4.0.2.A.0.42)?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=24610138&postcount=1:good:
Fifth fw going. well see...
I've tried these:
R800i_4.0.2.A.0.42_Generic
R800i_4.0.2.A.0.42_Generic_UK
R800i_4.0.2.A.0.58_EnhancedV2
R800i_4.0.2.A.0.58_Generic Hong Kong Trade
R800a_4.0.2.A.0.42_North America flashing
nomad- said:
4.0.2.A.0.58_EnhancedV2.ftf. It was the first one i flashed. Is there a link for stock (4.0.2.A.0.42)?
Click to expand...
Click to collapse
Try this link http://forum.xda-developers.com/showthread.php?t=1589399 for stock rom
You misunderstand, i asked about kernel not rom....what kind of kernel did you used now.
jiprudy said:
Try this link http://forum.xda-developers.com/showthread.php?t=1589399 for stock rom
You misunderstand, i asked about kernel not rom....what kind of kernel did you used now.
Click to expand...
Click to collapse
Please read the post! I already posted him the same link above plus he as been flashing stock roms the kernel's are included in the ftf filesAny custom kernel he had will be lost on flashing ftf!
Ok even my friend has tried to deal with the phone but without a result.
I think it is the bootloader. It may be damaged. Any ideas how can I repair it? I found this Medusa thing. doesn't seem to work.
Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, After successfully rooting my new tablet I decided to make a back up of my stock system, I used TWRP recovery to do so, after booting successfully on TWRP, I wanted to make sure I will have a clean image, I manually erased every possible thing on my table by selecting every option on TWRP, once done and on my way to reboot, before quitting TWRP warn me that there wasnt any system, and even with this warning I quit. Result I bricked my tablet hopefully "soft", to get even better I remembered that I didnt had a micro sd card on my tablet and by consequence I must have erase TWRP and every possible restore solution, the table get stuck with the Boot logo and thats it... I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use or what to install or what to do. And I don't get it why my program seems so buggy and I can´t select any of those options.
at least I could root my phone easily.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seriously cant thank you enough I googled around and did search a lot on the XDA forums, I'm now more scared to tweak around and make things worst , and maybe if not to late permanently dammage it.
lleresche said:
Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, I mannaged to root my device before usb debugging was on all good tablet was perfect etc... And than I did the stupidest thing ever... I installed TWRP Recovery and in order to make a clean back up of my system I selected Wipe out everything.... So the big problem is that after I manually selected every option System etc... can´t remenber but I do know I did wipe out EVERY SINGLE THING, And I did exit even receiving a WARNING you dont have a SYSTEM.... and I did yes quit.... Than to find myself stuck on the samsung logo and being totally blocked since than, I discovered with regret that I actually DIDNT had a Micro SD card and I did wipe out everything including the Restore program if Im getting it right.... I dont know if its already to late and I can go cry on a corner for waisting 500$ in 2 days or is there anything I could do ???, I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use my Zip unofficial downloaded rom and install. And I dont get it why my programm sems so buggy and I can´t select any of those options.
at least I could root my phone easyly.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seryouslly cant thank you enough I googled around and did search a lot on the XDA forums, Im now more scared to go depeer and maybe if not to late permanently dammage it.
Click to expand...
Click to collapse
Hi have you read this thread. http://forum.xda-developers.com/galaxy-tab-s/help/to-event-soft-brick-disaster-t2838473
maxal said:
Hi have you read this thread.
Click to expand...
Click to collapse
Hey maxal, thx for replying, my English is really not the best, if you think its not understandable I will re edit and try again.
You will need to find and download your firmware from Sammobile http://www.sammobile.com/firmwares/database/SM-T800/BTU/
and use odin to reflash your stock firmware.
Read this too. http://theunlockr.com/2014/08/09/how-to-unroot-the-samsung-galaxy-tab-s-10-5-wifi/
TURNING THE DARNED THING OFF:
Here's the problem. If you are at the Samsung splash screen or boot looping Recovery, you cannot turn your tablet off by just pressing the power button and you can't pull the battery. This prevents you from getting back into Recovery or download mode to restore your nandroid backup or use Odin
So here is what you do:
1) Plug your tablet into your computer (this is important!).
2) Hold down the home, volume down and power buttons until you boot into download mode. Once you are prompted, push the volume up button to enter download mode completely.
3) Now, once in download mode, hold down the power and volume down buttons (not the home button this time) until you screen goes blank (your tablet MUST be plugged into your computer for this to work!). Release the buttons and you will see the battery symbol on your screen. Your tablet is now off - thank god.
4) To enter Recovery mode, hold the home, volume up and power buttons down until Recovery loads.
5) Restore your nandroid backup if you have one.
maxal said:
You will need to find and download your firmware from Sammobile http://www.sammobile.com/firmwares/database/SM-T800/BTU/
and use odin to reflash your stock firmware.
Click to expand...
Click to collapse
Thank you so much Maxal I will do it so, indeed the text was terribly written I tried to make it better and more understandable, I read that actually Kies was the way to go for flashing back a bricked device, and odin was actually a risky thing, is that right ?
lleresche said:
Thank you so much Maxal I will do it so, indeed the text was terribly written I tried to make it better and more understandable, I read that actually Kies was the way to go for flashing back a bricked device, and odin was actually a risky thing, is that right ?
Click to expand...
Click to collapse
I believe kIes is for stock unrooted devices and Odin is for rooted devices, I may be wrong. I did get my self in a mess and I was stuck on the Samsung logo and with the help of the forum and what I have told you I managed to get my Tab S to turn off, I then boot in to download mode and used Odin to flash stock firmware again
all right almost done downloading the firmware, could you give me the tutorial you followed for bringing your tablet back to life ? or any good tutorial, Helping me to get out
thx again
lleresche said:
all right almost done downloading the firmware, could you give me the tutorial you followed for bringing your tablet back to life ? or any good tutorial, Helping me to get out
thx again
Click to expand...
Click to collapse
Ok, read my second post I have added a second link for you, follow the unroot instructions.
maxal said:
Ok, read my second post I have added a second link for you, follow the unroot instructions.
Click to expand...
Click to collapse
Got it super cool, wish me luck going for it. I write later if I succeed
Good luck :good:
maxal said:
Good luck :good:
Click to expand...
Click to collapse
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
lleresche said:
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
Click to expand...
Click to collapse
I don't know which firmware you should have as I don't know where you are from, but I don't think it should make much difference, the firmware I gave the link for is the UK one.
Maybe someone else can help with a link for the correct firmware for you.
lleresche said:
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
Click to expand...
Click to collapse
Is your model the galaxy tab s 10.5 wifi? Also what country did you get yours tab s
DUHAsianSKILLZ said:
Is your model the galaxy tab s 10.5 wifi? Also what country did you get yours tab s
Click to expand...
Click to collapse
I got from Germany I downloaded the newest from Germany, I flashed with Odin, and my tablet IS BAACK TO LIFE!!!!. I will now root again and install a custom rom properly. thank you very much everybody, for a second I really tough I trowed 500$ on the bin :laugh:
lleresche said:
I got from Germany I downloaded the newest from Germany, I flashed with Odin, and my tablet IS BAACK TO LIFE!!!!. I will now root again and install a custom rom properly. thank you very much everybody, for a second I really tough I trowed 500$ on the bin :laugh:
Click to expand...
Click to collapse
Well done, and now that you have a copy of your firmware should you have any problems in the future
lleresche said:
Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, After successfully rooting my new tablet I decided to make a back up of my stock system, I used TWRP recovery to do so, after booting successfully on TWRP, I wanted to make sure I will have a clean image, I manually erased every possible thing on my table by selecting every option on TWRP, once done and on my way to reboot, before quitting TWRP warn me that there wasnt any system, and even with this warning I quit. Result I bricked my tablet hopefully "soft", to get even better I remembered that I didnt had a micro sd card on my tablet and by consequence I must have erase TWRP and every possible restore solution, the table get stuck with the Boot logo and thats it... I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use or what to install or what to do. And I don't get it why my program seems so buggy and I can´t select any of those options.
at least I could root my phone easily.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seriously cant thank you enough I googled around and did search a lot on the XDA forums, I'm now more scared to tweak around and make things worst , and maybe if not to late permanently dammage it.
Click to expand...
Click to collapse
Sir please let me know exactly what you can take on your tablet Download mode for use Odin? I do not understand it well from the description of your problem.
PS: Sorry, but my this question was asked late. I see that already it isn't actual.
porcelana said:
Sir please let me know exactly what you can take on your tablet Download mode for use Odin? I do not understand it well from the description of your problem.
Click to expand...
Click to collapse
Hey Porcelana, I basically bricked my new Tablet, I was only able to acces Download mode, (Odin mode) I than Used Odin 3.09 from my computer to flash my device again.
The issue is fully solved and my tablet is back to life. thank you all again
lleresche said:
Hey Porcelana, I basically bricked my new Tablet, I was only able to acces Download mode, (Odin mode) I than Used Odin 3.09 from my computer to flash my device again.
The issue is fully solved and my tablet is back to life. thank you all again
Click to expand...
Click to collapse
OK, Thanks.
But please keep in mind for the future that the load to your Tab better the original firmware that corresponds to its original CSC Region code. This can help you avoid some of the problems in the firmware flashing. How it may be defined, you can read in this thread:
http://forum.xda-developers.com/galaxy-tab-s/help/how-to-select-correct-firmware-tablet-t3016068/post58500430
Regards
porcelana said:
OK, Thanks.
But please keep in mind for the future that the load to your Tab better the original firmware that corresponds to its original CSC Region code. This can help you avoid some of the problems in the firmware flashing. How it may be defined, you can read in this thread:
http://forum.xda-developers.com/galaxy-tab-s/help/how-to-select-correct-firmware-tablet-t3016068/post58500430
Regards
Click to expand...
Click to collapse
Hi Porcelana, Can you tell me can you use Kies to down load firmware if you are on a rooted rom?
maxal said:
Hi Porcelana, Can you tell me can you use Kies to down load firmware if you are on a rooted rom?
Click to expand...
Click to collapse
Hi maxal,
Download via KIES will not check root If you do not connect the tablet to a PC. It only checks the serial number and model type of your Tab for search new updates firmware with determine the correct CSC Region code. You can even download the correct firmware by KIES to your PC without having to connect the tablet and then save the file firmware (this requires some tricks) and flash it via Odin. To do this, you need only enter the serial number and model type of the device in KIES menu Tools -> Firmware Upgrade and Initialisation. More details have here:
http://forum.xda-developers.com/showpost.php?p=58527780&postcount=5
In this case you no need connect the tablet to PC. It also confirms ashyx here:
http://forum.xda-developers.com/showpost.php?p=58535945&postcount=7
Regards
Hi all, I just had a problem yesterday of which my watch not booting to OS. This morning I tried to flash firmwares via NetOdin, all passed but still no working. Only booting to Samsung Galaxy Watch Logo and then black screen. Any suggestions? Thanks
A
Can you post Photo or text from Odin Screen?
https://forum.xda-developers.com/showpost.php?p=73607036&postcount=1
You can leave Download Mode by holding Power Key few Seconds...
B
Is Download Wireless still working?
Or did you tried Recovery option in Reboot Menu?
Best Regards
adfree said:
A
Can you post Photo or text from Odin Screen?
https://forum.xda-developers.com/showpost.php?p=73607036&postcount=1
You can leave Download Mode by holding Power Key few Seconds...
B
Is Download Wireless still working?
Or did you tried Recovery option in Reboot Menu?
Best Regards
Click to expand...
Click to collapse
Download mode and wireless download mode can boot into as normal except recovery. I also can reflash firmware as normal but after completed Watch not boot to OS. Only Samsung Logo. Thanks
Looks good.
SM-R805U :good:
Reactivation Lock OFF :good: :good:
Warranty V. 0 0x0000
Samsung Official :good:
Official :good:
My suggestion.
Flash Combination Firmware.
Check this:
Code:
Serial Number is visible
IMEI is visible
WiFi address visible
BT address visible
Sometimes something to CSA partition could happen...
And hang on Logo remembers me on Security reason...
Gone IMEI is 1 Security Reason...
Best Regards
adfree said:
Looks good.
SM-R805U :good:
Reactivation Lock OFF :good: :good:
Warranty V. 0 0x0000
Samsung Official :good:
Official :good:
My suggestion.
Flash Combination Firmware.
Check this:
Sometimes something to CSA partition could happen...
And hang on Logo remembers me on Security reason...
Gone IMEI is 1 Security Reason...
Best Regards
Click to expand...
Click to collapse
Yes I did. I have flashed combination firmwares of 3 different builds. All flashes was successful but still no luck to boot to OS. Thank you very much for trying to help.
Yes I did. I have flashed combination firmwares of 3 different builds. All flashes was successful but still no luck to boot to OS.
Click to expand...
Click to collapse
Are you sure we mean the same?
A
I have forgotten...
Why you only choose 1 file... if you need to flash 4 files.
From your first post... Odin Screenshot
B
With Combination Firmware I mean this:
Code:
[B]COMBINATION[/B]-FT40_R805USQU1ASL2.tar.md5
This time 1 single file... so only 1 file to choose in netOdin
Summary:
Normal Stock Firmware looks like this:
Code:
BL_R805USQU1CSL2_usr.tar.md5
AP_R805USQU1CSL2_usr.tar.md5
CP_R805USQU1CSL2_CL1315275_QB14780771_SIGNED.tar.md5
CSC_OYN_R805UOYN1CSL2_usr.tar.md5
I can count 4 files...
So you need to flash 4 files.
Best Regards
adfree said:
Are you sure we mean the same?
A
I have forgotten...
Why you only choose 1 file... if you need to flash 4 files.
From your first post... Odin Screenshot
B
With Combination Firmware I mean this:
This time 1 single file... so only 1 file to choose in netOdin
Summary:
Normal Stock Firmware looks like this:
I can count 4 files...
So you need to flash 4 files.
Best Regards
Click to expand...
Click to collapse
I did flash with normal stock firmware consisted of 4 files. On screen shot I just tried one file only. Thanks
I will try to collect few Firmware Links to free available Combination Firmware...
Need some time...
I will update this post...
Best Regards
adfree said:
I will try to collect few Firmware Links to free available Combination Firmware...
Need some time...
I will update this post...
Best Regards
Click to expand...
Click to collapse
Thanks tomorrow I will try to flash again more specifically v4.O. Thank you a lot for your kind help!
https://samsungcombinationfile.com/samsung-sm-r805u
Here is for instance:
Code:
COMBINATION-FT40_R805USQU1ASA1.tar.md5
Only try if out of luck with Flashing 4 files from Stock Firmware.
Best Regards
adfree said:
https://samsungcombinationfile.com/samsung-sm-r805u
Here is for instance:
Only try if out of luck with Flashing 4 files from Stock Firmware.
Best Regards
Click to expand...
Click to collapse
I tried but still no luck of working. Thanks
Okay, this is bad... if Combination Firmware not boot...
Last attempt... flash all 4 files with netOdin:
Code:
BL_R805USQU1CSL2_usr.tar.md5
AP_R805USQU1CSL2_usr.tar.md5
CP_R805USQU1CSL2_CL1315275_QB14780771_SIGNED.tar.md5
CSC_OYN_R805UOYN1CSL2_usr.tar.md5
After this, if again out of luck... please post Photo from Download Mode again...
So we can check Warranty Void info... if still:
Code:
0 0x0000
Something bad happens to your GW...
And you can not fix this at home... :crying:
If Warranty still 0 0x0000 try to send to Repair Service...
Best Regards
adfree said:
Okay, this is bad... if Combination Firmware not boot...
Last attempt... flash all 4 files with netOdin:
Code:
BL_R805USQU1CSL2_usr.tar.md5
AP_R805USQU1CSL2_usr.tar.md5
CP_R805USQU1CSL2_CL1315275_QB14780771_SIGNED.tar.md5
CSC_OYN_R805UOYN1CSL2_usr.tar.md5
After this, if again out of luck... please post Photo from Download Mode again...
So we can check Warranty Void info... if still:
Code:
0 0x0000
Something bad happens to your GW...
And you can not fix this at home... :crying:
If Warranty still 0 0x0000 try to send to Repair Service...
Best Regards
Click to expand...
Click to collapse
I tried but still not working. Yes my Watch is still this code in 0 0x0000 but I bought with no warranty.
Thank you very much for trying to help me out. Sure, I will seek for repair service at my local place.
I planned to bring my Galaxy Watch for repairing tomorrow's morning. But luckily just about 5 minutes ago I have just pressed turn on unintentionally. And it was booting up and working now. Unbelievable it started working fine. Thanks @adfree for trying to help in last few days.
Hello, I am having a similar issue with my Samsung Galaxy watch SM-R805U, I just downloaded the combination file and I will try to load it tomorrow.
But is there a successful method to get this watch functioning again, without having to repair it?
Leakhanak said:
I planned to bring my Galaxy Watch for repairing tomorrow's morning. But luckily just about 5 minutes ago I have just pressed turn on unintentionally. And it was booting up and working now. Unbelievable it started working fine. Thanks @adfree for trying to help in last few days.
Click to expand...
Click to collapse
What was the last thing you did to get it working? Combo firmware.
sektor1952 said:
What was the last thing you did to get it working? Combo firmware.
Click to expand...
Click to collapse
You may try the Combo firmware. My watch since then is working and have updated to the latest firmware. Good luck!
Leakhanak said:
You may try the Combo firmware. My watch since then is working and have updated to the latest firmware. Good luck!
Click to expand...
Click to collapse
I tried the combo firmware and it was the same result, also is the combo firmware supposed to show some extra text during boot?
And you flashed it on the AP line?
sektor1952 said:
I tried the combo firmware and it was the same result, also is the combo firmware supposed to show some extra text during boot?
And you flashed it on the AP line?
Click to expand...
Click to collapse
Yes on the AP line. At last attempt, please try to flash all 4 files of stock firmware with netOdin. Good luck!
Leakhanak said:
Yes on the AP line. At last attempt, please try to flash all 4 files of stock firmware with netOdin. Good luck!
Click to expand...
Click to collapse
I did that too and wound up with the same result.
10.1 tab pro wifi edition rooted with king root worked good for about a week then I accidentallyheld power button to long and it went to go into Odin mode I think I hit cancel and then it wouldn't come back on was stuck at a gray screen I factory reset 4 times wipe cach..etc etc long story short its annoying any help with this would be coolthanks in advance..
I got a fix firmware file that looked legit and it worked on Odin so its gota be right rite?
I am kinda new to this xda sorry if I am in wrong place or wrong room
Noob/T said:
..... accidentallyheld power button to long and it went to go into Odin mode ..
Click to expand...
Click to collapse
That's peculiar as Odin/download mode is usually achieved by pwr+Vol dwn+home button.
Anyway, as you can get into that mode, I'd use SamFirm_Reborn_0.3.6.3 to download stock ROM from Samsungs servers (checking boxes "binary nature" +decryption) and flash the 4 files contained in the .zip via Odin.
It's P600 isn't it?
Noob/T said:
I got a fix firmware file that looked legit and it worked on Odin so its gota be right rite?
Click to expand...
Click to collapse
Where from?
bmwdroid said:
That's peculiar as Odin/download mode is usually achieved by pwr+Vol dwn+home button.
Anyway, as you can get into that mode, I'd use SamFirm_Reborn_0.3.6.3 to download stock ROM from Samsungs servers (checking boxes "binary nature" +decryption) and flash the 4 files contained in the .zip via Odin.
It's P600 isn't it?
Click to expand...
Click to collapse
No sm_ T520
So can I just look on that site for the right firm cause I think I used the wrong one maybe but not sure
Thanks for the info tho fr
Noob/T said:
So can I just look on that site for the right firm cause I think I used the wrong one maybe but not sure
Click to expand...
Click to collapse
With SamFirm_Reborn_0.3.6.3 you will definitely find the correct stock.
Used it for all 7 devices of mine.
bmwdroid said:
That's peculiar as Odin/download mode is usually achieved by pwr+Vol dwn+home button.
Anyway, as you can get into that mode, I'd use SamFirm_Reborn_0.3.6.3 to download stock ROM from Samsungs servers (checking boxes "binary nature" +decryption) and flash the 4 files contained in the .zip via Odin.
It's P600 isn't it?
Click to expand...
Click to collapse
no its sm-T520
Noob/T said:
no its sm-T520
Click to expand...
Click to collapse
Took you quite some time to find out
Anyway, procedure I've described above is the same.