i tried to use the spn-conf.xml from this thread, but unfortunately without success...
has anyone tried this or got it working on the defy and has some useful hints for me?
btw. my defy is running on Android 2.2.2 Froyo 3.4.2 179.2 CE Retail DeBlur
thx
has no one any idea????
is someone out there who tried it on the defy?
The same for me
I'm thinking about an update to 2.3 ...
is this problem fixed in the beta 2.3 from moto? or do you mean cm7?
does a 2.3 of moto already exist?
no, i'm thinking about cm7
where can I find the original moto v2.3 version?
I've a red cam version, so i don't have to care about the green cam
what about my inital post?
Related
Hi..
Defy is going to be launched here in India most probably w/o MOTOBLUR.
It's going to be on 2.1 Eclair.
Can anyone tell me if (and how) can it be upgraded to a higher firmware?
Here's no 100% working 2.2 for defy, but as i see, the work is still in progress.
Thank You Friend.
Hi
How can i return to the froyo 2.2 my Defy came with? Which sbf do i need for Germany? Or ist this working over a *.zip?
Wanna be able to return to stock in case i want to sell it..
Plz help or guide me to the right thread...cant find it
EDIT: Ok found the info here on XDA...
have you tried browsing through the official SBFs page? There is a list of FULL SBFs (I think) that you may flash on your phone.
But you have to remember what particular CG version you had prior to installation of CM7. Check the thread about the Beginner's Guide to Motorola Defy. It's a very informative guide.
downgrade
is it possible to downgrade from defy 2.3.4 gingerbread?
tom11 said:
is it possible to downgrade from defy 2.3.4 gingerbread?
Click to expand...
Click to collapse
I think so. I'm assuming that Gingerbread 2.3.4 and 2.3.5 are under the same CG versions (that's from how I understood the All-in-One guide).
But you haven't flashed any FULL SBFs yet, right? You just installed the CM7?
NEWS!
Today ,ME525 system will be upgraded to 2.3.4，This time is the official upgrade，By MFUN BBS. com Forum released the first time，Welcome to the forum for the exchange。
1 can downgrade after the upgrade?
A: The brush can be downgraded to a specific version of the ROM Android 2.2, this version will be released in the near future.
2 green lens is normal?
A: The domestic market DEFY are red lens, solid MOTO China, the upgrade package only for the state line to do the hardware adapter.
Please look outside the parallel version of the update or wait for the magic green lens interesting forum solution.
3. This version is the official version?
A: This version is the official version, compared to the previous version is more stable transplant leak.
4 How to Brush?
A: Brush through a dedicated Motorola RSD Lite software can be a key Brush
5 data storage problem?
A: The major version number upgrade will clear the phone, please make a backup job in advance
6 Brush whether the warranty
A: The State Bank brush this upgrade package users can enjoy the same warranty
7 Brush Pack in what ways exist?
A: SBF firmware form
8 parallel red-head is available?
A: In theory there is no pressure.
OMG!!!!!!!!!!!
wonder other country or area will update defy or not!!!
and it is "flash" instead of "brush"?
Yes brush after being directly translated to from Chinese means flash.
This is a terribly translated pile of text, does this mean green lens will work or red lens will work???
Official, so can you update it with motorola's update software? Or how does one know it is official?
Congratulation！But mine is smuggleg.
I have updated my ME525 using the image file made by VID190, thanks him
你花这么多时间来翻译，真是有耐心啊，呵呵
I've one question, can we (mb525) to flash signed sbf. I want official 2.3 cause, poorly powermangement of custom roms (battery is like countdownter when display is used)?
Arrow DEFY for China(ME525)Upgrade 2.3
someone who can say that such testing is and what improvements have
I make the install
defy
will the defy be updated for the rest of the world?
^ officially no. Motorola makes stupid ...
So this is an official 2.3 but only in China?
Now, is it better than builds we got already? Is kernel fixed? I read bright buttons issue seems to be present... And if we get SBF, which cg versions it will have (Chinese Froyo got version 2, not 4)?
Officially only China ME525 will get Android 2.3.4, this is discrimination, but Motorola makes 2 time, when update Motoroi 702 in Chaina to 2.2, when even xt720 not get official 2.2 in rest world. Chaina are about 1 billions
cool but brush
If it does work on the MB525 its gonna be a lot more stable and battery efficient than the Defy+ rom's that we use as they aren't optimized for the smaller battery on the Defy.
Sent from my ME525+ using Tapatalk
So, what's the news on this it?
Is the update available over the air in China or not?
Anyone from China has done the "brushing" yet? - lol
I could give it a shot, but I don't want to mess with my 'downgradability' to Froyo and CM7...
And from that official GB, would a Froyo nand restore and fixed.sbf flashing bring me back OK - 100% safe?
Where the devs at !?
Sent from my ME525+ using Tapatalk
Could someone take the liberty to post it in the Development forum. Please.
Sent from my MB525 using Tapatalk
When will be yours update to 2.3, in October, we want try your rom on our devices...
Upgrade the china rom to downgrade later to froyo ?
Hi i want to change my gingerbread rom..
My Phone parameter:
System: 45.0.1320.MB526.Retail.en.DE
Android: 2.3.6
Baseband: EPU93_U_00.60.00
Kernel: [email protected] #1
Build: 4.5.1-134_DPF-132
My Problem:
After flashing a another rom, the defy don´t boot only the White LED is on...
Battery is full...
thx...
Is there any android 4.0 rom for defy?
I've got a Motorola Defy+ which was running on 2.2 when i purchased it.
In modding my defy+ i managed to update it to 2.3.6 with a full sbf file before being aware of the whole "no downgrade" option.
I really like the look of wajkiui rom. However upon reading the details of it; it seems that its only available to 2.2? http://forum.xda-developers.com/showthread.php?t=1161110
Is there any possible way at all that I can downgrade 2.3.6 to 2.2? I'd then just do a fixed sbf + nandroid backup.
or
Is there a version of the wajkiui rom that is made available for 2.3.6 that i'm not aware of?
I've done a lot of searching on xda and havent been able to find an answer.. so thought id make a thread
Thanks
Please help me as i am new to xda developer forum and as i have already install miui rom in my previous motorola defy (MB525 Red Lens). But due to some hardware prblm i have gone to motorola service center and solved my hardware prblm. But main prblm comes after these when i recieved my phone they update my motorola defy to 2.3.6 kernel version which i have lots of agrument with the company and services center representative. As i like to use miui because it is best custom rom i have used please help or give some solution to solve these problm
Mazhar.sas said:
Please help me as i am new to xda developer forum and as i have already install miui rom in my previous motorola defy (MB525 Red Lens). But due to some hardware prblm i have gone to motorola service center and solved my hardware prblm. But main prblm comes after these when i recieved my phone they update my motorola defy to 2.3.6 kernel version which i have lots of agrument with the company and services center representative. As i like to use miui because it is best custom rom i have used please help or give some solution to solve these problm
Click to expand...
Click to collapse
hi, maybe the service center just had flashed your rom to 2.3.6, but your defy is no difference from before, you can flash miui as usuall, but you bootloader may be 5or6, be careful of it.
Sent from my ME525+ using XDA
Thanks for the comment as I have today when to motorola service center they have changed my motherboard to MB526 (i.e Defy +) instead of giving me motorola defy (i.e MB525) they are giving me Defy +. Now in that case what should i do. Help me as i m big fan miui and i would like to install in motorola defy plus also.
I have the same problem like you and cant wait for the miui for Defy + Oo
I think you need to flash the froyo bl6 ROM first as I thought that you couldn't flash a froyo kernel on the new gingerbread bootloaders. Could be off tho.
Sent from my MB525 using XDA
I have used both WIUI and MIUI Pikachu Edition on my DEFY+. WIUI problem was that it didn't have the battery fix, so it charge to ~82% max, but, nevermind, it was slower than Pikachu, anyway!
To use Pikachu you need to flash Froyo BL6 - download link
If you need step-by-step guide, let me know, as I have done that on both mine and brother's defy+!
Cheers!
defy+ and miui install
Hello.
How can I use miui on my defy+?
I have cyanogen rom now, my stock is 2.3.5 (I don't upgrade to 2.3.6) and i make root and recovery menu.
I try install pikachu, but I get just boot error, wiui too.
A like miui, before defy+ I had a nexus one and I love the miui system
Thx
KozGab
niksy+ said:
I have used both WIUI and MIUI Pikachu Edition on my DEFY+. WIUI problem was that it didn't have the battery fix, so it charge to ~82% max, but, nevermind, it was slower than Pikachu, anyway!
To use Pikachu you need to flash Froyo BL6 -
If you need step-by-step guide, let me know, as I have done that on both mine and brother's defy+!
Cheers!
Click to expand...
Click to collapse
Indeed I need info on MIUI and Defu Plus
niksy+ said:
I have used both WIUI and MIUI Pikachu Edition on my DEFY+. WIUI problem was that it didn't have the battery fix, so it charge to ~82% max, but, nevermind, it was slower than Pikachu, anyway!
To use Pikachu you need to flash Froyo BL6 - download link
If you need step-by-step guide, let me know, as I have done that on both mine and brother's defy+!
Cheers!
Click to expand...
Click to collapse
Hello niksy.
Do you have any new info or suggestion on installing MIUI on MB526?
For example:
1. Is il possible to flash a MIUI 2.4.20 (the final edition) full configured from my old MB525 with clockworkmod?
2. Is there a solution for the Po-Li battery charging level?
3. Is there a better kernel to use berore installing ROMs and wich MIUI distro do uoi suggest on MB526?
Thanks in advance for your kind help.