Develop Bugs

[Q] Need Help!! First time EVO Root/CM6 gone bad...

OK....long story short...finally decided to delve into rooting and custom roms. Flashed CM6 yesterday and everything was going great. Then suddenly yesterday evening as I was swiping between home screens on my device everything froze, and I have been trying to recover ever since.
Anything I flash now just freezes, and i have a touch panel-fail so even when i do get a rom to boot i cant actually get into set it to usb mode or anything.
using bootloader i can not get it to connect using the adb driver so that I can push via adb.
about an hour ago I was successfully able to run the latest RUU and it ran successfully, but device is still way laggy (takes 15 minutes to boot) and no touch screen.
Any help would be greatly appreciated!!! don't know where to go from here. From what I have read its not bricked because I can get into Bootloader and Recovery???

Just a shot in the dark here, but it sounds like since you're stock now it's an actual hardware failure.

lil-dice said:
Just a shot in the dark here, but it sounds like since you're stock now it's an actual hardware failure.
Click to expand...
Click to collapse
Is there way I can verify that the RUU did indeed flash *EVERYTHING* back to stock?

It seen like you have a HARDWARE issues, Re-Boot the Stock Rom. Call Sprint and explain what's going on with your phone, please *DO NO'T MENTION YOU ROOTED YOUR PHONE* Tell them you try to wipe your phone and it was really laggy before you wipe, since you gonna Re-Boot the stock rom the phone is going to get UNROOTED, I know this cause I work at Sprint... So good luck...

jalexishg said:
It seen like you have a HARDWARE issues, Re-Boot the Stock Rom. Call Sprint and explain what's going on with your phone, please *DO NO'T MENTION YOU ROOTED YOUR PHONE* Tell them you try to wipe your phone and it was really laggy before you wipe, since you gonna Re-Boot the stock rom the phone is going to get UNROOTED, I know this cause I work at Sprint... So good luck...
Click to expand...
Click to collapse
I definitely wont rule out hardware issues...this is a refurb device i just swapped my original EVO for on Monday. I guess I just want to rule out any software issues for sure.
You mention that re-booting the stock rom will UNROOT the phone...however I hav no way to currently re-boot the rom??

Also looks like i can not get into recovery now, when I select the option in the bootloader it just takes me to the screen with a picture of a device and a red triangle

azkevman said:
I definitely wont rule out hardware issues...this is a refurb device i just swapped my original EVO for on Monday. I guess I just want to rule out any software issues for sure.
You mention that re-booting the stock rom will UNROOT the phone...however I hav no way to currently re-boot the rom??
Click to expand...
Click to collapse
Get a Memory Card adapter for PC or use anything that will let you connect your SD card to your computer... As soon as you put the *ORIGINAL STOCK ROM* in your SD card your phone will do everything by itself...

jalexishg said:
Get a Memory Card adapter for PC or use anything that will let you connect your SD card to your computer... As soon as you put the *ORIGINAL STOCK ROM* in your SD card your phone will do everything by itself...
Click to expand...
Click to collapse
ok, going to try this now...
I assume I need to load it onto my sd card as the pc36IMG.zip so that i can load it from the bootloader?

you got it...just put it on the root of sdcard and good luck.
Sent from my PC36100 using Tapatalk

azkevman said:
ok, going to try this now...
I assume I need to load it onto my sd card as the pc36IMG.zip so that i can load it from the bootloader?
Click to expand...
Click to collapse
Yeah... Good luck... Let me know how everything went..

OK, so I loaded this ROM: http://forum.xda-developers.com/showthread.php?t=874091 onto my sd card as PC36IMG.zip
It loads the zip then says parsing for about 1 second then just reverts back to the HBOOT option ???
Doesn't ask me if i want to install????

Looks like I grabbed only the OTA update rom that was posted on that page. I am going to try the odexed version on this page: http://forum.xda-developers.com/showthread.php?t=874251

azkevman said:
Looks like I grabbed only the OTA update rom that was posted on that page. I am going to try the odexed version on this page: http://forum.xda-developers.com/showthread.php?t=874251
Click to expand...
Click to collapse
I can upload the version I use... Give a sec.(Uploading)

OK here you go !! http://www.megaupload.com/?d=EKDYV9I5 I hope this help you !

jalexishg said:
OK here you go !! http://www.megaupload.com/?d=EKDYV9I5 I hope this help you !
Click to expand...
Click to collapse
Thanks, I will let you know how it goes.

is nand unlocked on the phone?

asafegous said:
is nand unlocked on the phone?
Click to expand...
Click to collapse
I think so, on the bootloader it still shows "S-off" ...doesn't that indicate it is still unlocked?

OK, so I was able to flash the file in the bootloader. It looks like it won't load past the 'HTC EVO 4g' splash screen.
ARGGGGGGGGGGGGGG!!!!!!!!!!!!

But the Installation finish without problems ?

jalexishg said:
But the Installation finish without problems ?
Click to expand...
Click to collapse
yeah, as far as i can tell. It said it completed and gave me the option to press the power button to reboot.
It did finally load up...after about 15 minutes, but touchscreen is still erroring out and not funtional.

[Q] Possible brick? Any ideas?

Hey guys, I think I screwed up here and I'm wondering if anyone else has had this problem:
Basically, I had a rooted E4G Touch with a custom ROM installed. I went to install ANOTHER custom ROM THROUGH ODIN, as this previous ROM (I believe it was a Calkulin variant) did NOT have CWM recovery. During the ODIN process, something went wrong, and my computer/ODIN...basically, everything froze up while doing the MODEM portion. NOW I can't do anything.
- CWM was able to install on the thing...but it does not recognize my external SD card now. Every time I try to mount it, I get a "Error mounting /emmc".
- I'm still able to get into download mode on the phone, however the phone is not recognized on any computer I've tried. I've attempted multiple computers/USB cords and nothing picks it up.
I'm running out of ideas here. I picked up a USB jig that should be here soon, so I'm going to try that and reset the counter....which leads me to my next question: If I use that, can I take the thing back to Sprint and get a replacement? I have the insurance plan and everything, so if they won't take it back because of the custom software I guess I could always smash it or something...
Any help would be appreciated!

munson11 said:
Hey guys, I think I screwed up here and I'm wondering if anyone else has had this problem:
Basically, I had a rooted E4G Touch with a custom ROM installed. I went to install ANOTHER custom ROM THROUGH ODIN, as this previous ROM (I believe it was a Calkulin variant) did NOT have CWM recovery. During the ODIN process, something went wrong, and my computer/ODIN...basically, everything froze up while doing the MODEM portion. NOW I can't do anything.
- CWM was able to install on the thing...but it does not recognize my external SD card now. Every time I try to mount it, I get a "Error mounting /emmc".
- I'm still able to get into download mode on the phone, however the phone is not recognized on any computer I've tried. I've attempted multiple computers/USB cords and nothing picks it up.
I'm running out of ideas here. I picked up a USB jig that should be here soon, so I'm going to try that and reset the counter....which leads me to my next question: If I use that, can I take the thing back to Sprint and get a replacement? I have the insurance plan and everything, so if they won't take it back because of the custom software I guess I could always smash it or something...
Any help would be appreciated!
Click to expand...
Click to collapse
The ROM you flashed through ODIN was for this phone, right?
What custom ROM are you referring to that was available through ODIN?

assuming you flashed the right ROM, start with the basics..if you can get into download mode then try a simple reboot of your computer. Sometimes Odin won't recognize after it has been run
Sent from my SPH-D710 using xda premium

barnacles10 said:
The ROM you flashed through ODIN was for this phone, right?
What custom ROM are you referring to that was available through ODIN?
Click to expand...
Click to collapse
It was the CyanogenMod 9 rom that is out there right now. IN the post (I'm having trouble finding it as I'm not at that computer right now) they had an ODIN variation for people such as myself, where you were to flash that and then go back through to update it to the latest version.
JohnCorleone said:
assuming you flashed the right ROM, start with the basics..if you can get into download mode then try a simple reboot of your computer. Sometimes Odin won't recognize after it has been run
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I attempted this as well Went through and rebooted the computer with the phone plugged in. Rebooted with it not plugged in. Plugged the phone in with ODIN on the screen and started it up. Started it up unplugged, went into download mode on the phone, and then plugged it in. Still nothing.
And I just realized I posted this in General and not Q&A...and chance I could get this moved since I am clearly out of my mind right now?

munson11 said:
It was the CyanogenMod 9 rom that is out there right now. IN the post (I'm having trouble finding it as I'm not at that computer right now) they had an ODIN variation for people such as myself, where you were to flash that and then go back through to update it to the latest version.
Click to expand...
Click to collapse
The only odin component involved with flashing CM9 is flashing a gb kernel with a CWM recovery. I haven't seen a cm9 tar, this is why I'm confused. Finding out exactly what you flashed will help in understanding what the problem is.
To flash cm9 you need to odin a gb cwm kernel and then boot to recovery and install cm9. However, that's not a tar, its an update.zip.

barnacles10 said:
The only odin component involved with flashing CM9 is flashing a gb kernel with a CWM recovery. I haven't seen a cm9 tar, this is why I'm confused. Finding out exactly what you flashed will help in understanding what the problem is.
To flash cm9 you need to odin a gb cwm kernel and then boot to recovery and install cm9. However, that's not a tar, its an update.zip.
Click to expand...
Click to collapse
Yeah it was definitely a tar.md5 file, which leads me to believe I was incredibly dumb and possibly flashed a ROM for a different model phone. I'm having difficulty finding the post now which is very strange. This could be one of those moments where I take a good hard look in the mirror and figure out just what the heck I was thinking.
I'll keep looking for what exactly I did wrong, but in the mean time is there anything else I could attempt or look for short of attempting that USB jig and making a trip to Sprint? I'm feeling like a huge idiot right now. I've done this how many times now and when I finally make a mistake, it turns out to be huge.

munson11 said:
It was the CyanogenMod 9 rom that is out there right now. IN the post (I'm having trouble finding it as I'm not at that computer right now) they had an ODIN variation for people such as myself, where you were to flash that and then go back through to update it to the latest version.
I attempted this as well Went through and rebooted the computer with the phone plugged in. Rebooted with it not plugged in. Plugged the phone in with ODIN on the screen and started it up. Started it up unplugged, went into download mode on the phone, and then plugged it in. Still nothing.
And I just realized I posted this in General and not Q&A...and chance I could get this moved since I am clearly out of my mind right now?
Click to expand...
Click to collapse
Maybe you should post the link to exactly what you were flashing...

http://www.addictivetips.com/mobile/cyanogenmod-9-galaxy-s-ii-download/
Please tell me this isnt what you flashed.
Sent from my SPH-D710 using xda premium

munson11 said:
Yeah it was definitely a tar.md5 file, which leads me to believe I was incredibly dumb and possibly flashed a ROM for a different model phone. I'm having difficulty finding the post now which is very strange. This could be one of those moments where I take a good hard look in the mirror and figure out just what the heck I was thinking.
I'll keep looking for what exactly I did wrong, but in the mean time is there anything else I could attempt or look for short of attempting that USB jig and making a trip to Sprint? I'm feeling like a huge idiot right now. I've done this how many times now and when I finally make a mistake, it turns out to be huge.
Click to expand...
Click to collapse
Well ultimately you can try uninstalling / reinstalling drivers. But you say this issue exists across multiple pcs so that likely isn't it.
You can try another cable and see if you have any success with that.
Other then that, it kinda really depends what is in that tar you flashed. Once you find it, post the link, and that will help troubleshoot your issue.

playya said:
Maybe you should post the link to exactly what you were flashing...
Click to expand...
Click to collapse
lballer69 said:
http://www.addictivetips.com/mobile/cyanogenmod-9-galaxy-s-ii-download/
Please tell me this isnt what you flashed.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Haha I am a freaking idiot. How in the heck did I manage to do this...I definitely flashed this: http://forum.xda-developers.com/showthread.php?t=1419102
I do not know what was going through my head last night...but it was not any sort of smart thoughts. A rope and a sturdy tree are what I require at this point, correct?
Whatever insults you guys would like to throw at me, I will take. I clearly deserve them :'(

munson11 said:
Haha I am a freaking idiot. How in the heck did I manage to do this...I definitely flashed this: http://forum.xda-developers.com/showthread.php?t=1419102
I do not know what was going through my head last night...but it was not any sort of smart thoughts. A rope and a sturdy tree are what I require at this point, correct?
Whatever insults you guys would like to throw at me, I will take. I clearly deserve them :'(
Click to expand...
Click to collapse
Did you flash the bootloader from that device? ie did your steps include this? \/
Make sure you're running ICS bootloaders lower than LPH: Download (flash as PDA with odin or extract and $ sudo heimdall flash --primary-boot boot.bin --secondary-boot Sbl.bin)
Click to expand...
Click to collapse

barnacles10 said:
Did you flash the bootloader from that device? ie did your steps include this? \/
Click to expand...
Click to collapse
Negative, I started right at the "Using the noob-proof ODIN method:". It said noob-proof and I decided that would be the easiest. It turns out it is very easy...if you're flashing to the correct phone Plus, I'd used ODIN before and felt comfortable with it.

Ha ha that's the first one for this method......look up jtag they may fix it for u if u don't have USB .... About 60 with shipping
Sent from my SPH-D710 using Tapatalk 2 Beta-5

munson11 said:
Negative, I started right at the "Using the noob-proof ODIN method:". It said noob-proof and I decided that would be the easiest. It turns out it is very easy...if you're flashing to the correct phone Plus, I'd used ODIN before and felt comfortable with it.
Click to expand...
Click to collapse
I just downloaded the tar to have a look at whats included.
After flashing this you'll have a bootloader for the intl. sgs2. This is a problem many ran into when original SGS2 leaked tars started surfacing as well.
JTAG might be able to fix it, I'm not sure whether people with this issue were successful or not with JTAG repair as the intl gs2 flashing boat seems to have sailed now. However, a jig will likely do nothing, unfortunately.

barnacles10 said:
I just downloaded the tar to have a look at whats included.
After flashing this you'll have a bootloader for the intl. sgs2. This is a problem many ran into when original SGS2 leaked tars started surfacing as well.
JTAG might be able to fix it, I'm not sure whether people with this issue were successful or not with JTAG repair as the intl gs2 flashing boat seems to have sailed now. However, a jig will likely do nothing, unfortunately.
Click to expand...
Click to collapse
Ok thank you for your help on this. You don't think a jig will reset the counter or anything so that I can take it back to Sprint? If not, I'm not above "dropping" it on the ground and using the insurance I have on it for a replacement.

munson11 said:
Ok thank you for your help on this. You don't think a jig will reset the counter or anything so that I can take it back to Sprint? If not, I'm not above "dropping" it on the ground and using the insurance I have on it for a replacement.
Click to expand...
Click to collapse
I don't foresee it working only because your phone isn't recognized by your pc and the problem doesnt lie on the pc side.
The problem is instead with the port on the phone which leads me to believe it won't recognize a jig either.
A jtag if successful will leave you with more money in your pocket and a non-returb. Something to consider if you've got a backup phone you can use for a few days.

barnacles10 said:
I don't foresee it working only because your phone isn't recognized by your pc and the problem doesnt lie on the pc side.
The problem is instead with the port on the phone which leads me to believe it won't recognize a jig either.
A jtag if successful will leave you with more money in your pocket and a non-returb. Something to consider if you've got a backup phone you can use for a few days.
Click to expand...
Click to collapse
I don't see sprint replacing it with cm9 On it .... And u will need mobile Odin to get back to stock but with it not mounting the Emmc probably can't do that .... That is your hope to get back to stock using mobile Odin someway .... Triangle away app will reset Odin count but with no radio you need to get apps to do it and no sd from what u said ...maybe tell insurance u lost it and get it replaced
Jtag should work also since there is no emmc failure like the blue light of death bricks ...
Sent from my SPH-D710 using Tapatalk 2 Beta-5

[Q] Sprint Galaxy S III Rooted/Installed ROM... Now won't power on. Help!

Hi everyone. I'm new to the forum and I'm looking for a little help today.
I rooted my new Sprint Galaxy S III using Odin3-v3.04, and CWM_SuperUser_v3.0.7. Afterwards I rebooted and all was good.
I then downloaded I9300_Omega_v6.0_XXALF6 ROM and loaded on my phone and rebooted into recovery to install the ROM. I went through the install process, selected remove bloatware and installed. When finished I checked the reboot phone and clicked finish. The phone turned off and didn't ever turn back on.
I have pulled the battery and tried to power on using recovery, download mode and just power but nothing works.
Anyone have any idea what I can do?
Thank you for your time and help.

alexanderd said:
Hi everyone. I'm new to the forum and I'm looking for a little help today.
I rooted my new Sprint Galaxy S III using Odin3-v3.04, and CWM_SuperUser_v3.0.7. Afterwards I rebooted and all was good.
I then downloaded I9300_Omega_v6.0_XXALF6 ROM and loaded on my phone and rebooted into recovery to install the ROM. I went through the install process, selected remove bloatware and installed. When finished I checked the reboot phone and clicked finish. The phone turned off and didn't ever turn back on.
I have pulled the battery and tried to power on using recovery, download mode and just power but nothing works.
Anyone have any idea what I can do?
Thank you for your time and help.
Click to expand...
Click to collapse
development area has a thread for that:
http://forum.xda-developers.com/showthread.php?t=1727171
ONLY use ROMs that you'll find here in these threads not the I9300; that s a different phone from ours.

Thanks I'll check there.

Honestly I was waiting for this to happen gid luck restoring it phone
Sent from my SPH-L710 using XDA

But seriously I hope you learned your lesson and will read and hope you get your phone fixed or replaced
Sent from my Sprint Galaxy Nexus CDMA using Xparent ICS Blue Tapatalk 2

Epix4G said:
But seriously I hope you learned your lesson and will read and hope you get your phone fixed or replaced
Sent from my Sprint Galaxy Nexus CDMA using Xparent ICS Blue Tapatalk 2
Click to expand...
Click to collapse
Hopefully this fail helps us all back from a potential brick. We live, flash and learn.
Sent from my SPH-D700 using xda premium

New phone on the way!
I was able to get a replacement sent from Sprint. Had to go to a corporate store and have a tech look at the phone and they agreed it was toast...
Luckily they didn't know it was due to my failed attempt to load an unsupported ROM.
Lesson learned... new phone should be in by the end of the week.
I'll be waiting for a supported ROM this time.

alexanderd said:
I was able to get a replacement sent from Sprint. Had to go to a corporate store and have a tech look at the phone and they agreed it was toast...
Luckily they didn't know it was due to my failed attempt to load an unsupported ROM.
Lesson learned... new phone should be in by the end of the week.
I'll be waiting for a supported ROM this time.
Click to expand...
Click to collapse
No wonder our insurance deductibles keep going up...

bizdady said:
No wonder our insurance deductibles keep going up...
Click to expand...
Click to collapse
+1
Still sucks for op
Sent from my SPH-L710 using Tapatalk 2

matrixzone5 said:
Honestly I was waiting for this to happen gid luck restoring it phone
Sent from my SPH-L710 using XDA
Click to expand...
Click to collapse
Oh man tell me about it, I almost stupidly went on to the CM9 nightlies and downloaded the I9300 version before I thought to myself, "well wait a minute, that's not my model number!"
Duh, shoulda had a V8.

I didnt install a GSM rom but still managed to brick somehow. Didnt touch any system files or do anything to where i should be bricked either. Any idea when a full stock Odin package will be made? My phone has been bricked for almost 2 days now
Edit: i started a tread here a few days ago -> http://forum.xda-developers.com/showthread.php?t=1731416 if anyone cares to look or has any advice for me
Thanks

pizzlewizzle said:
I didnt install a GSM rom but still managed to brick somehow. Didnt touch any system files or do anything to where i should be bricked either. Any idea when a full stock Odin package will be made? My phone has been bricked for almost 2 days now
Edit: i started a tread here a few days ago -> http://forum.xda-developers.com/showthread.php?t=1731416 if anyone cares to look or has any advice for me
Thanks
Click to expand...
Click to collapse
What have you tried so far? Have you tried reflashing cwm recovery in Odin?

I did the same thing that the OP said, flashed that omega rom and now my phone wont turn on either.
I was going to try the jig method

taygutta said:
I did the same thing that the OP said, flashed that omega rom and now my phone wont turn on either.
I was going to try the jig method
Click to expand...
Click to collapse
Have you tried mskip's fix??
http://forum.xda-developers.com/showthread.php?t=1727171

bizdady said:
Have you tried mskip's fix??
http://forum.xda-developers.com/showthread.php?t=1727171
Click to expand...
Click to collapse
I want to do this but I somehow need to get the phone on. The buttons dont work.

Any luck?
My phone got stuck booting, so I tried to install the omega rom. The install worked well, and I clicked "reboot." Now the phone won't turn on. I can't get to ODIN or recovery anymore.
Did you guys find any fixes?

brickeds3 said:
My phone got stuck booting, so I tried to install the omega rom. The install worked well, and I clicked "reboot." Now the phone won't turn on. I can't get to ODIN or recovery anymore.
Did you guys find any fixes?
Click to expand...
Click to collapse
What happened is that you flashed a rom that was meant for the international version of the S3 and your on the US version. The only fix I have found is to send it to mobiletechvideos.com. I did and they say they can fix it and maybe save my data I have on it ( I just sent it in)
My fingers are crossed for the data recovery but as far as the phone I am going to send it for a exchange anyway.

Welp, I'm sad to say I just did the same thing too. Should have read. I'm a stinkin noob at this. I installed the I9300 version on a US version phone. Has there been any more development on this? Is the hardware fried, or is there a fix through that mobiletechvideos.com that was mentioned? What was the outcome of that, Taygutta, if you don't mind me re-bringing back up a potentially painful topic?? This thread made me a little sick, since it's my brother's new phone (someone else that knew what they were doing rooted it for him but he didn't like the rom, so I thought I would help him find a few other options to try flashing.)
Anyway, any confirmation that I'm buying my brother a new phone (so I can emotionally prepare for the purchase) or are there some other options?

There's one more thing you can try. There's a little device called a USB Jig. It was made for SGS-2 to clear the yellow triangle and reset flash counts in ODIN mode. It also puts your phone in ODIN mode by simply plugging it into the USB port of a powered down phone. Once in ODIN mode, you can reflash a stock ROM, recovery, etc. You can buy these for around $20 or less on the web.
If this does not work, I'm afraid nothing will.
Good luck.

6uPMAH said:
There's one more thing you can try. There's a little device called a USB Jig. It was made for SGS-2 to clear the yellow triangle and reset flash counts in ODIN mode. It also puts your phone in ODIN mode by simply plugging it into the USB port of a powered down phone. Once in ODIN mode, you can reflash a stock ROM, recovery, etc. You can buy these for around $20 or less on the web.
If this does not work, I'm afraid nothing will.
Good luck.
Click to expand...
Click to collapse
Somewhere in the thread an answer exists. You are not the first to do this.
I think the jig is the best way.
Sent from my SPH-L710 using Tapatalk 2

[Q] Bricked with out custon rom??

So I think my phone is hard bricked. I was on G+ ealier today, clicked on a link that opened Chrome. got through a third of the web page and my phone freezes then the screen goes black... I have tried every troubleshoot trick provided by tmobile and samsung and the phone wont respond in any way. Just a black screen. Is it possible to brick your phone with out trying to flash a custom ROM??? The only thing new I have done in the past week was install "graph ti89" and "aviate." I dont know if this has anything to do with it but tmobile has being try to get me to install the kitkat OTA for the last week and I keep ignoring it.

just update
jcampana28 said:
So I think my phone is hard bricked. I was on G+ ealier today, clicked on a link that opened Chrome. got through a third of the web page and my phone freezes then the screen goes black... I have tried every troubleshoot trick provided by tmobile and samsung and the phone wont respond in any way. Just a black screen. Is it possible to brick your phone with out trying to flash a custom ROM??? The only thing new I have done in the past week was install "graph ti89" and "aviate." I dont know if this has anything to do with it but tmobile has being try to get me to install the kitkat OTA for the last week and I keep ignoring it.
Click to expand...
Click to collapse
Hi,
Do the update or factory reset your phone. You can always use KIES also.
Ms. K

Ms. K said:
Hi,
Do the update or factory reset your phone. You can always use KIES also.
Ms. K
Click to expand...
Click to collapse
Thanks for your input but the phone won't turn on at all. Can'T turn it on to update. Won't go into safe mode by pressing vol. up&home&power. When I plug it into the computer it says it needs drivers for "QHSUSB_BULK." Kies doesn't see it as a connected device...

If you haven't done anything to the phone why not call Tmobile and get a replacement..
Sent from my bad ass Kryon infused Note 3

deeznutz1977 said:
If you haven't done anything to the phone why not call Tmobile and get a replacement..
Sent from my bad ass Kryon infused Note 3
Click to expand...
Click to collapse
because i'd like to recover the data that is on the phone.

jcampana28 said:
because i'd like to recover the data that is on the phone.
Click to expand...
Click to collapse
A few threads down you would have found this... http://forum.xda-developers.com/showthread.php?p=47555043
My recovery image is here: http://www.mediafire.com/view/?6nu61z43y51v3k4
You need a 32 GB sd card and some luck. Also reading is a requirement.
Yours may be a special case though, as you claim nothing was going on besides you clicked a link. Should have absolutely nothing to do with ota, and everyone else who had done this was messing with their phone. This definitely works for 4.3, but no one had reported working on 4.4 (you were on 4.3 anyways). Good luck.
Sent from my SM-G900T using Tapatalk

noobtoob said:
A few threads down you would have found this... http://forum.xda-developers.com/showthread.php?p=47555043
My recovery image is here: http://www.mediafire.com/view/?6nu61z43y51v3k4
You need a 32 GB sd card and some luck. Also reading is a requirement.
Yours may be a special case though, as you claim nothing was going on besides you clicked a link. Should have absolutely nothing to do with ota, and everyone else who had done this was messing with their phone. This definitely works for 4.3, but no one had reported working on 4.4 (you were on 4.3 anyways). Good luck.
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Mr Noobtoob, has anyone reported un-bricking a N900t running 4.4.2 (1st release, believe it ends in N94 or similar, NOT NE6)?
If so, did they do anything different?
Be well.

golfcartguy said:
Mr Noobtoob, has anyone reported un-bricking a N900t running 4.4.2 (1st release, believe it ends in N94 or similar, NOT NE6)?
If so, did they do anything different?
Be well.
Click to expand...
Click to collapse
I have not seen a successful report back of the nb4 firmware. Doesn't mean it doesn't work, just don't have confirmation.
Fusionized tweaking tapatalker here...

Thanks for the quick response!
Going to try, and will report back.
To clarify, it must be a Class 10 microsd card, and must be the same size (32gb), 1st formatted to exfat, correct?
Sent using XDA Free mobile app

golfcartguy said:
To clarify, it must be a Class 10 microsd card, and must be the same size (32gb), 1st formatted to exfat, correct?
Click to expand...
Click to collapse
Those are the magic ingredients!
Frank

Frank Westlake said:
Those are the magic ingredients!
Frank
Click to expand...
Click to collapse
Got it! So, to be clear;
1st - Format class 10 card to Exfat file system or structure
2nd - Using Win32Diskmapper, just point to the file (in my case kk900tunbrick image) and write to card. *Nothing special, should I verify Md5 sum, or just leave it as default settings?
3rd, Proceed to attempt to Unbrick (Battery at 100%, Put Sd card in slot, Then Add Battery, Connect cable - some say, some say doesn't matter, to computer, then attempt to boot with button sequence to download mode, or may boot by itself?)
Also, if the 1st image I downloaded does not work, can I reformat or wipe the sd card and start again with the other file (I believe a Pit file??)

[Q] Can someone create a debrick.img for me (D851)?

Hey guys, I have everything that I need except the files to boot my phone. My phone has been hard bricked for 2 days already and attempting to clean the partition and the hardware bug on my phone. The phone is however unresponsive and cannot go into download mode. So if someone is kind enough and have/created a debrick.img, can you kindly put the img files so I can fix this phone.

I'll hook you up when I get a chance if nobody beats me to it. Having a debrick file on hand is a great idea. Just so other readers know its going to be late tonight when I get time so if you know how you should do it.

ThePagel said:
I'll hook you up when I get a chance if nobody beats me to it. Having a debrick file on hand is a great idea. Just so other readers know its going to be late tonight when I get time so if you know how you should do it.
Click to expand...
Click to collapse
i def want it. dont hold out.

ThePagel said:
I'll hook you up when I get a chance if nobody beats me to it. Having a debrick file on hand is a great idea. Just so other readers know its going to be late tonight when I get time so if you know how you should do it.
Click to expand...
Click to collapse
YES YES YES!
(Breathing Intensifies)

xmagiicsx said:
YES YES YES!
(Breathing Intensifies)
Click to expand...
Click to collapse
can you create one for me too and once I get it how can I put it back to my recovery because right now my phone keeps going to twrp

xmagiicsx said:
YES YES YES!
(Breathing Intensifies)
Click to expand...
Click to collapse
Here you go! Tell me if this works I will have more time tomorrow to trouble shoot the dump if it doesn't work. I trust since you asked for it you know how to properly use it. https://www.androidfilehost.com/?fid=23622183712470742
BACARDILIMON said:
i def want it. dont hold out.
Click to expand...
Click to collapse
Hold off on downloading it until after it is verified as working
jameslee2 said:
can you create one for me too and once I get it how can I put it back to my recovery because right now my phone keeps going to twrp
Click to expand...
Click to collapse
This is not for you, this is for recovering from a bad brick your problem is you tried to update to 10m via ota with twrp installed. You have a couple solutions to fix just not this.

Sure but this is for hard bricked meaning that the sd partition have failed and the phone wont turn on or go into download mode which cause the G3 to be unresponsive

ThePagel said:
Here you go! Tell me if this works I will have more time tomorrow to trouble shoot the dump if it doesn't work. I trust since you asked for it you know how to properly use it. https://www.androidfilehost.com/?fid=23622183712470742
Hold off on downloading it until after it is verified as working
This is not for you, this is for recovering from a bad brick your problem is you tried to update to 10m via ota with twrp installed. You have a couple solutions to fix just not this.
Click to expand...
Click to collapse
Thanks, man! Ill get to work asap

xmagiicsx said:
Thanks, man! Ill get to work asap
Click to expand...
Click to collapse
This is compressed with 7zip. I bet you already figured this out but I understand why some people get confused Just wanted to make sure

ThePagel said:
Here you go! Tell me if this works I will have more time tomorrow to trouble shoot the dump if it doesn't work. I trust since you asked for it you know how to properly use it. https://www.androidfilehost.com/?fid=23622183712470742
Hold off on downloading it until after it is verified as working
This is not for you, this is for recovering from a bad brick your problem is you tried to update to 10m via ota with twrp installed. You have a couple solutions to fix just not this.
Click to expand...
Click to collapse
Hi ThePagel,
What solutions can you provide that would resolve this problem? Thanks

jameslee2 said:
Hi ThePagel,
What solutions can you provide that would resolve this problem? Thanks
Click to expand...
Click to collapse
best options:
http://forum.xda-developers.com/tmobile-lg-g3/general/fix-recovery-loop-twrp-computer-t2873386 (input everything EXACTLY you will still be on C)
or if that didn't work
http://forum.xda-developers.com/tmobile-lg-g3/general/firmware-t-mobile-lg-g3-t2818667 (read from top to bottom and you will know what your best option is for you)
short term fix:
Factory reset (I think this will work)
or
Install a custom rom via removable sd card or otg cable (If the best options fail at least you have a working phone until you figure it out)

ThePagel said:
Here you go! Tell me if this works I will have more time tomorrow to trouble shoot the dump if it doesn't work. I trust since you asked for it you know how to properly use it. https://www.androidfilehost.com/?fid=23622183712470742
Hold off on downloading it until after it is verified as working
This is not for you, this is for recovering from a bad brick your problem is you tried to update to 10m via ota with twrp installed. You have a couple solutions to fix just not this.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2660566
Using this method. Wish me luck!!!

xmagiicsx said:
http://forum.xda-developers.com/showthread.php?t=2660566
Using this method. Wish me luck!!!
Click to expand...
Click to collapse
Fingers are crossed! if win32diskimager doesn't seem to work try to write it to the card multiple times and if it keeps failing and you have access to linux dd will most definitely work.
If you come to the conclusion the debrick is bad ill make a bigger one and keep doing so until we decide this will work for you or not.

The files aren't working ( I think its me doing something wrong) but I attempt to fix it again in the morning EST. Sorry that I'm a nuisance and wasting your time D:

xmagiicsx said:
The files aren't working ( I think its me doing something wrong) but I attempt to fix it again in the morning EST
Click to expand...
Click to collapse
Did it write to the sdcard? If so I would assume in order to get it to boot you would need to remove the battery and put it back in then hold the volume up + plug it into the computer.

Yea, I'm writing it again and trying to do that method again

xmagiicsx said:
Yea, I'm writing it again and trying to do that method again
Click to expand...
Click to collapse
If it seems to not work ill make a 200,250,300,350,400 mb dumps and send them all your way. If one of them do not work I will dump the entire partition and find out where it is hiding.

ThePagel said:
If it seems to not work ill make a 200,250,300,350,400 mb dumps and send them all your way. If one of them do not work I will dump the entire partition and find out where it is hiding.
Click to expand...
Click to collapse
That seems like a good idea if this method doesn't work. If this method fails, I will start on it tomorrow.

xmagiicsx said:
That seems like a good idea if this method doesn't work. If this method fails, I will start on it tomorrow.
Click to expand...
Click to collapse
Yeah I need to get to bed and have a semi busy day tomorrow. Luckily its all house work and I should find time here and there to take a brake and do some dumps. I cant see it needing to be bigger than 200mb but we will see.

ThePagel said:
Yeah I need to get to bed and have a semi busy day tomorrow. Luckily its all house work and I should find time here and there to take a brake and do some dumps. I cant see it needing to be bigger than 200mb but we will see.
Click to expand...
Click to collapse
Thanks man! This is what it looks like after writing it to disk imager. Don't know if this is correct way or not. Is it possible to create repartition and boot.img into the G3?