Hey guys, I think I screwed up here and I'm wondering if anyone else has had this problem:
Basically, I had a rooted E4G Touch with a custom ROM installed. I went to install ANOTHER custom ROM THROUGH ODIN, as this previous ROM (I believe it was a Calkulin variant) did NOT have CWM recovery. During the ODIN process, something went wrong, and my computer/ODIN...basically, everything froze up while doing the MODEM portion. NOW I can't do anything.
- CWM was able to install on the thing...but it does not recognize my external SD card now. Every time I try to mount it, I get a "Error mounting /emmc".
- I'm still able to get into download mode on the phone, however the phone is not recognized on any computer I've tried. I've attempted multiple computers/USB cords and nothing picks it up.
I'm running out of ideas here. I picked up a USB jig that should be here soon, so I'm going to try that and reset the counter....which leads me to my next question: If I use that, can I take the thing back to Sprint and get a replacement? I have the insurance plan and everything, so if they won't take it back because of the custom software I guess I could always smash it or something...
Any help would be appreciated!
munson11 said:
Hey guys, I think I screwed up here and I'm wondering if anyone else has had this problem:
Basically, I had a rooted E4G Touch with a custom ROM installed. I went to install ANOTHER custom ROM THROUGH ODIN, as this previous ROM (I believe it was a Calkulin variant) did NOT have CWM recovery. During the ODIN process, something went wrong, and my computer/ODIN...basically, everything froze up while doing the MODEM portion. NOW I can't do anything.
- CWM was able to install on the thing...but it does not recognize my external SD card now. Every time I try to mount it, I get a "Error mounting /emmc".
- I'm still able to get into download mode on the phone, however the phone is not recognized on any computer I've tried. I've attempted multiple computers/USB cords and nothing picks it up.
I'm running out of ideas here. I picked up a USB jig that should be here soon, so I'm going to try that and reset the counter....which leads me to my next question: If I use that, can I take the thing back to Sprint and get a replacement? I have the insurance plan and everything, so if they won't take it back because of the custom software I guess I could always smash it or something...
Any help would be appreciated!
Click to expand...
Click to collapse
The ROM you flashed through ODIN was for this phone, right?
What custom ROM are you referring to that was available through ODIN?
assuming you flashed the right ROM, start with the basics..if you can get into download mode then try a simple reboot of your computer. Sometimes Odin won't recognize after it has been run
Sent from my SPH-D710 using xda premium
barnacles10 said:
The ROM you flashed through ODIN was for this phone, right?
What custom ROM are you referring to that was available through ODIN?
Click to expand...
Click to collapse
It was the CyanogenMod 9 rom that is out there right now. IN the post (I'm having trouble finding it as I'm not at that computer right now) they had an ODIN variation for people such as myself, where you were to flash that and then go back through to update it to the latest version.
JohnCorleone said:
assuming you flashed the right ROM, start with the basics..if you can get into download mode then try a simple reboot of your computer. Sometimes Odin won't recognize after it has been run
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I attempted this as well Went through and rebooted the computer with the phone plugged in. Rebooted with it not plugged in. Plugged the phone in with ODIN on the screen and started it up. Started it up unplugged, went into download mode on the phone, and then plugged it in. Still nothing.
And I just realized I posted this in General and not Q&A...and chance I could get this moved since I am clearly out of my mind right now?
munson11 said:
It was the CyanogenMod 9 rom that is out there right now. IN the post (I'm having trouble finding it as I'm not at that computer right now) they had an ODIN variation for people such as myself, where you were to flash that and then go back through to update it to the latest version.
Click to expand...
Click to collapse
The only odin component involved with flashing CM9 is flashing a gb kernel with a CWM recovery. I haven't seen a cm9 tar, this is why I'm confused. Finding out exactly what you flashed will help in understanding what the problem is.
To flash cm9 you need to odin a gb cwm kernel and then boot to recovery and install cm9. However, that's not a tar, its an update.zip.
barnacles10 said:
The only odin component involved with flashing CM9 is flashing a gb kernel with a CWM recovery. I haven't seen a cm9 tar, this is why I'm confused. Finding out exactly what you flashed will help in understanding what the problem is.
To flash cm9 you need to odin a gb cwm kernel and then boot to recovery and install cm9. However, that's not a tar, its an update.zip.
Click to expand...
Click to collapse
Yeah it was definitely a tar.md5 file, which leads me to believe I was incredibly dumb and possibly flashed a ROM for a different model phone. I'm having difficulty finding the post now which is very strange. This could be one of those moments where I take a good hard look in the mirror and figure out just what the heck I was thinking.
I'll keep looking for what exactly I did wrong, but in the mean time is there anything else I could attempt or look for short of attempting that USB jig and making a trip to Sprint? I'm feeling like a huge idiot right now. I've done this how many times now and when I finally make a mistake, it turns out to be huge.
munson11 said:
It was the CyanogenMod 9 rom that is out there right now. IN the post (I'm having trouble finding it as I'm not at that computer right now) they had an ODIN variation for people such as myself, where you were to flash that and then go back through to update it to the latest version.
I attempted this as well Went through and rebooted the computer with the phone plugged in. Rebooted with it not plugged in. Plugged the phone in with ODIN on the screen and started it up. Started it up unplugged, went into download mode on the phone, and then plugged it in. Still nothing.
And I just realized I posted this in General and not Q&A...and chance I could get this moved since I am clearly out of my mind right now?
Click to expand...
Click to collapse
Maybe you should post the link to exactly what you were flashing...
http://www.addictivetips.com/mobile/cyanogenmod-9-galaxy-s-ii-download/
Please tell me this isnt what you flashed.
Sent from my SPH-D710 using xda premium
munson11 said:
Yeah it was definitely a tar.md5 file, which leads me to believe I was incredibly dumb and possibly flashed a ROM for a different model phone. I'm having difficulty finding the post now which is very strange. This could be one of those moments where I take a good hard look in the mirror and figure out just what the heck I was thinking.
I'll keep looking for what exactly I did wrong, but in the mean time is there anything else I could attempt or look for short of attempting that USB jig and making a trip to Sprint? I'm feeling like a huge idiot right now. I've done this how many times now and when I finally make a mistake, it turns out to be huge.
Click to expand...
Click to collapse
Well ultimately you can try uninstalling / reinstalling drivers. But you say this issue exists across multiple pcs so that likely isn't it.
You can try another cable and see if you have any success with that.
Other then that, it kinda really depends what is in that tar you flashed. Once you find it, post the link, and that will help troubleshoot your issue.
playya said:
Maybe you should post the link to exactly what you were flashing...
Click to expand...
Click to collapse
lballer69 said:
http://www.addictivetips.com/mobile/cyanogenmod-9-galaxy-s-ii-download/
Please tell me this isnt what you flashed.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Haha I am a freaking idiot. How in the heck did I manage to do this...I definitely flashed this: http://forum.xda-developers.com/showthread.php?t=1419102
I do not know what was going through my head last night...but it was not any sort of smart thoughts. A rope and a sturdy tree are what I require at this point, correct?
Whatever insults you guys would like to throw at me, I will take. I clearly deserve them :'(
munson11 said:
Haha I am a freaking idiot. How in the heck did I manage to do this...I definitely flashed this: http://forum.xda-developers.com/showthread.php?t=1419102
I do not know what was going through my head last night...but it was not any sort of smart thoughts. A rope and a sturdy tree are what I require at this point, correct?
Whatever insults you guys would like to throw at me, I will take. I clearly deserve them :'(
Click to expand...
Click to collapse
Did you flash the bootloader from that device? ie did your steps include this? \/
Make sure you're running ICS bootloaders lower than LPH: Download (flash as PDA with odin or extract and $ sudo heimdall flash --primary-boot boot.bin --secondary-boot Sbl.bin)
Click to expand...
Click to collapse
barnacles10 said:
Did you flash the bootloader from that device? ie did your steps include this? \/
Click to expand...
Click to collapse
Negative, I started right at the "Using the noob-proof ODIN method:". It said noob-proof and I decided that would be the easiest. It turns out it is very easy...if you're flashing to the correct phone Plus, I'd used ODIN before and felt comfortable with it.
Ha ha that's the first one for this method......look up jtag they may fix it for u if u don't have USB .... About 60 with shipping
Sent from my SPH-D710 using Tapatalk 2 Beta-5
munson11 said:
Negative, I started right at the "Using the noob-proof ODIN method:". It said noob-proof and I decided that would be the easiest. It turns out it is very easy...if you're flashing to the correct phone Plus, I'd used ODIN before and felt comfortable with it.
Click to expand...
Click to collapse
I just downloaded the tar to have a look at whats included.
After flashing this you'll have a bootloader for the intl. sgs2. This is a problem many ran into when original SGS2 leaked tars started surfacing as well.
JTAG might be able to fix it, I'm not sure whether people with this issue were successful or not with JTAG repair as the intl gs2 flashing boat seems to have sailed now. However, a jig will likely do nothing, unfortunately.
barnacles10 said:
I just downloaded the tar to have a look at whats included.
After flashing this you'll have a bootloader for the intl. sgs2. This is a problem many ran into when original SGS2 leaked tars started surfacing as well.
JTAG might be able to fix it, I'm not sure whether people with this issue were successful or not with JTAG repair as the intl gs2 flashing boat seems to have sailed now. However, a jig will likely do nothing, unfortunately.
Click to expand...
Click to collapse
Ok thank you for your help on this. You don't think a jig will reset the counter or anything so that I can take it back to Sprint? If not, I'm not above "dropping" it on the ground and using the insurance I have on it for a replacement.
munson11 said:
Ok thank you for your help on this. You don't think a jig will reset the counter or anything so that I can take it back to Sprint? If not, I'm not above "dropping" it on the ground and using the insurance I have on it for a replacement.
Click to expand...
Click to collapse
I don't foresee it working only because your phone isn't recognized by your pc and the problem doesnt lie on the pc side.
The problem is instead with the port on the phone which leads me to believe it won't recognize a jig either.
A jtag if successful will leave you with more money in your pocket and a non-returb. Something to consider if you've got a backup phone you can use for a few days.
barnacles10 said:
I don't foresee it working only because your phone isn't recognized by your pc and the problem doesnt lie on the pc side.
The problem is instead with the port on the phone which leads me to believe it won't recognize a jig either.
A jtag if successful will leave you with more money in your pocket and a non-returb. Something to consider if you've got a backup phone you can use for a few days.
Click to expand...
Click to collapse
I don't see sprint replacing it with cm9 On it .... And u will need mobile Odin to get back to stock but with it not mounting the Emmc probably can't do that .... That is your hope to get back to stock using mobile Odin someway .... Triangle away app will reset Odin count but with no radio you need to get apps to do it and no sd from what u said ...maybe tell insurance u lost it and get it replaced
Jtag should work also since there is no emmc failure like the blue light of death bricks ...
Sent from my SPH-D710 using Tapatalk 2 Beta-5
Related
Hello all,
This is my first post to XDA and I'm having some serious issues. I have searched eveywhere to try and find an answer but with no luck. I was trying to install chris41 odin efo2plus rom/kernel, and odin froze at modem.bin. I didn't know what to do. I unplugged the usb cable, pulled the battery and tried again. However, this time it froze at factory.fs being installed. I am using the new ODIN (1.82). I have tried running as admin, running in xp sp2 compatibility mode with admin, I've changed USB ports, and even changed USB cables, although I've never had a problem with ODIN and the Palm Pre cable that I've been using. I'm stuck. My phone won't boot, and I can't get it to ODIN anything. Even tried to ODIN DI18 stock, and still freezes at factory.fs. I was on Bonsai with EXT4, and chris41's rom is RFS. Don't know if that has anything to do with it? I am completely confused. Any help is GREATLY appreciated.
Just keep trying bro... if it worked before it'll work again Odin is just fussy...
GrStead123 said:
Hello all,
This is my first post to XDA and I'm having some serious issues. I have searched eveywhere to try and find an answer but with no luck. I was trying to install chris41 odin efo2plus rom/kernel, and odin froze at modem.bin. I didn't know what to do. I unplugged the usb cable, pulled the battery and tried again. However, this time it froze at factory.fs being installed. I am using the new ODIN (1.82). I have tried running as admin, running in xp sp2 compatibility mode with admin, I've changed USB ports, and even changed USB cables, although I've never had a problem with ODIN and the Palm Pre cable that I've been using. I'm stuck. My phone won't boot, and I can't get it to ODIN anything. Even tried to ODIN DI18 stock, and still freezes at factory.fs. I was on Bonsai with EXT4, and chris41's rom is RFS. Don't know if that has anything to do with it? I am completely confused. Any help is GREATLY appreciated.
Click to expand...
Click to collapse
Try running it without the battery in the phone. Open Odin plug phone in without battery and then go into download mode. Put your files in appropriate place and run Odin with only auto reboot checked. I have three epics and one of them will actually not work at all in Odin unless I have the battery out. Worth a try.
Sent from my SPH-D700 using XDA Premium App
Try using qbking77's video on youtube
http://www.youtube.com/watch?v=YLMlYuwTj6w&feature=youtube_gdata_player
Sent from my Evo Killer using XDA Premium App
Ok, well, lets start at where the files are supposed to go. Every rom I've ODIN'd before, I just put the tar in the phone section. Never put a pit or anything else with it. Is this correct? Second, usually when I ODIN a rom, it comes up with a little progress bar on the phone showing how far along the process is. I've tried now about 20 times after the first ODIN, and I haven't gotten a progress bar yet. Should I be worried about that?
GrStead123 said:
Ok, well, lets start at where the files are supposed to go. Every rom I've ODIN'd before, I just put the tar in the phone section. Never put a pit or anything else with it. Is this correct? Second, usually when I ODIN a rom, it comes up with a little progress bar on the phone showing how far along the process is. I've tried now about 20 times after the first ODIN, and I haven't gotten a progress bar yet. Should I be worried about that?
Click to expand...
Click to collapse
After reading this ... use the advice of the post above yours...
My phone did the same thing until I saw this video then it clicked.... you gotta flash the kernel in the bootloader area and the rom in the pda area at the same time.....DOH
Sent from my Evo Killer using XDA Premium App
theduce102 said:
My phone did the same thing until I saw this video then it clicked.... you gotta flash the kernel in the bootloader area and the rom in the pda area at the same time.....DOH
Sent from my Evo Killer using XDA Premium App
Click to expand...
Click to collapse
Do NOT flash the debug kernal!
LunaticWolf said:
Do NOT flash the debug kernal!
Click to expand...
Click to collapse
Why not.... I flashed it and I didn't have any problems.....
Sent from my Evo Killer using XDA Premium App
If you don't wanna use odin then I recommend odin'ing back to ec05 and root get cwm3.1.0.1 and flashing the ef02 zip that we recently got....
Sent from my Evo Killer using XDA Premium App
After following qbking's video and putting the tar in pda instead of phone, and putting the pit in, it now fails even earlier in the process. The status bar comes up on my phone, but as soon as it goes to write cache.fs, it fails. ODIN either comes up and says FAIL in the red box, or ODIN completely crashes. And, same thing as before, I've tried diff USB, rebooted computer, in xp mode, with admin, without admin. I'm starting to think my phone is a brick.
theduce102 said:
Why not.... I flashed it and I didn't have any problems.....
Sent from my Evo Killer using XDA Premium App
Click to expand...
Click to collapse
HAHA it says dont use it in video in annotations i mean come on already as well as in noobs thread its for debugging purposes and will eat your battery alive.
Please read things this is why people have issues and wonder why and then complain its so simple to read by using your eyes
Not being angry but just trying to point out that, this is why noobs either brick or get terrible results.
I got it. I don't know why, but for some reason I had to have Re-Partition, Auto-Reboot, and F. Reset Time all checked, as opposed to only Auto-Reboot. I'm now on EC05. Thanks all for your input. I really do appreciate it.
it may be your usb cable. Are you using the factory samsung cable? if so that was the reason why most of my odin's were failing. Try a generic usb cable from monoprice or something and it may help you the same way it helped me!
Edit: forget it
Sent from my Evo Killer using XDA Premium App
theduce102 said:
It didn't kill my battery at all and flashing the kernel was the only way that the original ef02 leak flashed through odin for me.... so you might wanna wait before you troll on someone which I see you do in every thread I see you post in..... Im not a noob and read these forums word for word everyday and try to help where no one else will.... shove it...
Sent from my Evo Killer using XDA Premium App
Click to expand...
Click to collapse
IF YOU READ WORD FOR WORD read this then
http://forum.xda-developers.com/showpost.php?p=14813947&postcount=1
DO NOT FLASH DEBUG KERNEL
EVEN IN VIDEO it says do not flash.
You think you have a good battery but it would be better if you didn't flash it
Dont call someone a troll if you don't wanna read 100%
Im simply trying to explain and help you out. Several people told you don't flash the debug kernel were all just trying to help each other out.
One more thought!
I realize this thread is long dead but i found it using google looking for a solution to this exact issue, so i will add some input from my own personal experience.
Make sure you are using a fully charged battery. Also if you have multiple batteries try swapping between them. I have 2 counterfeit and one authentic battery, using the counterfeits causes problems in odin for me.
Also you may need to repartition if you are coming from a newer rom that is not BML
Hello all! I've been trying to fix my phone for a few days, and can't seem to do it, so I thought I'd make a post regarding it.
I believe the beginning of this originated after trying to go back to gingerbread from fc15 ICS. To learn from my mistakes, this is NOT good, right? lol. probably because fc15 wasn't made for gingerbread?
I was able to get into CWM, but I couldn't perform a recovery or install a new ROM. At this time (after trying a whole bunch of things to fix my device), I may or may not be rooted, but I'm almost certain I am not because I can't get into CWM. If I have to lose all of my data, I guess I will (I didn't have an SD card at the time - just got one), but if there's any way I would like to keep my data. Also, at this point, I'm at the "formware upgrade encountered an issue. please select revoery mode in kies and try again". I have been able to get rid of this screen in the past, but I'd like to know the best rout to go from here.
I have read about bricked devices for awhile now, but to attempt to link the hazy definition I have with experience, is my device bricked?
Please help me!
Thank you.
tf201
I'm sorry, just now seeing the sticky regarding bricked device prevention. But I'd like to know how to identify a bricked device (besides not being able to do anything at all - which isn't my case), and if I have any option at this point.
tf201
andddlay said:
I'm sorry, just now seeing the sticky regarding bricked device prevention. But I'd like to know how to identify a bricked device (besides not being able to do anything at all - which isn't my case), and if I have any option at this point.
tf201
Click to expand...
Click to collapse
If you can get into download mode then Odin back to el26 like most instructions say to. Once you have a working GB then you can make a decision on where to go from there. Others might have better advice as that's gonna kill all you're data.
Swyped from my E4GT running Blazer 4.1 using xda premium
CyberpodS2 said:
If you can get into download mode then Odin back to el26 like most instructions say to. Once you have a working GB then you can make a decision on where to go from there. Others might have better advice as that's gonna kill all you're data.
Swyped from my E4GT running Blazer 4.1 using xda premium
Click to expand...
Click to collapse
thanks for the reply! after flashing stockcwm-el26, i was able to get back into cwm. however, from there i'm still having trouble. it will not boo. i'm still going to try a whole bunch of stuff lol
tf201
Hopefully someone will comment on my suggestion... If you can get into cwm then I would use calc's format all zip then flash a ROM that has a great record of smooth install.I personally have never had a problem with Blazer so that's what I would flash. Like I said, hopefully someone will either agree or have a better solution before you go with my idea. Good luck and make sure if you get it going you share your leanings!
Swyped from my E4GT running Blazer 4.1 using xda premium
Best bet is to download one of sfhub's one click root methods since your phone can still get into download mode. Doesn't matter what u already have on ur phone as his method will wipe all and replace all as long as you can get into download mode with your computer recognizing ur phone.
Sent from my SPH-D710 using XDA
dante32278 said:
Best bet is to download one of sfhub's one click root methods since your phone can still get into download mode. Doesn't matter what u already have on ur phone as his method will wipe all and replace all as long as you can get into download mode with your computer recognizing ur phone.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Yea what he said... Much easier than screwing around with flashing stuff like I suggested.
Swyped from my E4GT running Blazer 4.1 using xda premium
sorry for responding so late!
thank you both very much. i tried the program, and was still unable to recover the device - it always hung right at the end, unfortunately. a replacement device is in the mail, and i should get it very soon (thankfully for free).
another question i suppose i would like to ask...on cwm, it says i can mount internal storage as a mass-storage-device. when i try to do this, nothing pops up. is there a way to do this and, potentially, recovering my data?
tf201
Hi everyone. I'm new to the forum and I'm looking for a little help today.
I rooted my new Sprint Galaxy S III using Odin3-v3.04, and CWM_SuperUser_v3.0.7. Afterwards I rebooted and all was good.
I then downloaded I9300_Omega_v6.0_XXALF6 ROM and loaded on my phone and rebooted into recovery to install the ROM. I went through the install process, selected remove bloatware and installed. When finished I checked the reboot phone and clicked finish. The phone turned off and didn't ever turn back on.
I have pulled the battery and tried to power on using recovery, download mode and just power but nothing works.
Anyone have any idea what I can do?
Thank you for your time and help.
alexanderd said:
Hi everyone. I'm new to the forum and I'm looking for a little help today.
I rooted my new Sprint Galaxy S III using Odin3-v3.04, and CWM_SuperUser_v3.0.7. Afterwards I rebooted and all was good.
I then downloaded I9300_Omega_v6.0_XXALF6 ROM and loaded on my phone and rebooted into recovery to install the ROM. I went through the install process, selected remove bloatware and installed. When finished I checked the reboot phone and clicked finish. The phone turned off and didn't ever turn back on.
I have pulled the battery and tried to power on using recovery, download mode and just power but nothing works.
Anyone have any idea what I can do?
Thank you for your time and help.
Click to expand...
Click to collapse
development area has a thread for that:
http://forum.xda-developers.com/showthread.php?t=1727171
ONLY use ROMs that you'll find here in these threads not the I9300; that s a different phone from ours.
Thanks I'll check there.
Honestly I was waiting for this to happen gid luck restoring it phone
Sent from my SPH-L710 using XDA
But seriously I hope you learned your lesson and will read and hope you get your phone fixed or replaced
Sent from my Sprint Galaxy Nexus CDMA using Xparent ICS Blue Tapatalk 2
Epix4G said:
But seriously I hope you learned your lesson and will read and hope you get your phone fixed or replaced
Sent from my Sprint Galaxy Nexus CDMA using Xparent ICS Blue Tapatalk 2
Click to expand...
Click to collapse
Hopefully this fail helps us all back from a potential brick. We live, flash and learn.
Sent from my SPH-D700 using xda premium
New phone on the way!
I was able to get a replacement sent from Sprint. Had to go to a corporate store and have a tech look at the phone and they agreed it was toast...
Luckily they didn't know it was due to my failed attempt to load an unsupported ROM.
Lesson learned... new phone should be in by the end of the week.
I'll be waiting for a supported ROM this time.
alexanderd said:
I was able to get a replacement sent from Sprint. Had to go to a corporate store and have a tech look at the phone and they agreed it was toast...
Luckily they didn't know it was due to my failed attempt to load an unsupported ROM.
Lesson learned... new phone should be in by the end of the week.
I'll be waiting for a supported ROM this time.
Click to expand...
Click to collapse
No wonder our insurance deductibles keep going up...
bizdady said:
No wonder our insurance deductibles keep going up...
Click to expand...
Click to collapse
+1
Still sucks for op
Sent from my SPH-L710 using Tapatalk 2
matrixzone5 said:
Honestly I was waiting for this to happen gid luck restoring it phone
Sent from my SPH-L710 using XDA
Click to expand...
Click to collapse
Oh man tell me about it, I almost stupidly went on to the CM9 nightlies and downloaded the I9300 version before I thought to myself, "well wait a minute, that's not my model number!"
Duh, shoulda had a V8.
I didnt install a GSM rom but still managed to brick somehow. Didnt touch any system files or do anything to where i should be bricked either. Any idea when a full stock Odin package will be made? My phone has been bricked for almost 2 days now
Edit: i started a tread here a few days ago -> http://forum.xda-developers.com/showthread.php?t=1731416 if anyone cares to look or has any advice for me
Thanks
pizzlewizzle said:
I didnt install a GSM rom but still managed to brick somehow. Didnt touch any system files or do anything to where i should be bricked either. Any idea when a full stock Odin package will be made? My phone has been bricked for almost 2 days now
Edit: i started a tread here a few days ago -> http://forum.xda-developers.com/showthread.php?t=1731416 if anyone cares to look or has any advice for me
Thanks
Click to expand...
Click to collapse
What have you tried so far? Have you tried reflashing cwm recovery in Odin?
I did the same thing that the OP said, flashed that omega rom and now my phone wont turn on either.
I was going to try the jig method
taygutta said:
I did the same thing that the OP said, flashed that omega rom and now my phone wont turn on either.
I was going to try the jig method
Click to expand...
Click to collapse
Have you tried mskip's fix??
http://forum.xda-developers.com/showthread.php?t=1727171
bizdady said:
Have you tried mskip's fix??
http://forum.xda-developers.com/showthread.php?t=1727171
Click to expand...
Click to collapse
I want to do this but I somehow need to get the phone on. The buttons dont work.
Any luck?
My phone got stuck booting, so I tried to install the omega rom. The install worked well, and I clicked "reboot." Now the phone won't turn on. I can't get to ODIN or recovery anymore.
Did you guys find any fixes?
brickeds3 said:
My phone got stuck booting, so I tried to install the omega rom. The install worked well, and I clicked "reboot." Now the phone won't turn on. I can't get to ODIN or recovery anymore.
Did you guys find any fixes?
Click to expand...
Click to collapse
What happened is that you flashed a rom that was meant for the international version of the S3 and your on the US version. The only fix I have found is to send it to mobiletechvideos.com. I did and they say they can fix it and maybe save my data I have on it ( I just sent it in)
My fingers are crossed for the data recovery but as far as the phone I am going to send it for a exchange anyway.
Welp, I'm sad to say I just did the same thing too. Should have read. I'm a stinkin noob at this. I installed the I9300 version on a US version phone. Has there been any more development on this? Is the hardware fried, or is there a fix through that mobiletechvideos.com that was mentioned? What was the outcome of that, Taygutta, if you don't mind me re-bringing back up a potentially painful topic?? This thread made me a little sick, since it's my brother's new phone (someone else that knew what they were doing rooted it for him but he didn't like the rom, so I thought I would help him find a few other options to try flashing.)
Anyway, any confirmation that I'm buying my brother a new phone (so I can emotionally prepare for the purchase) or are there some other options?
There's one more thing you can try. There's a little device called a USB Jig. It was made for SGS-2 to clear the yellow triangle and reset flash counts in ODIN mode. It also puts your phone in ODIN mode by simply plugging it into the USB port of a powered down phone. Once in ODIN mode, you can reflash a stock ROM, recovery, etc. You can buy these for around $20 or less on the web.
If this does not work, I'm afraid nothing will.
Good luck.
6uPMAH said:
There's one more thing you can try. There's a little device called a USB Jig. It was made for SGS-2 to clear the yellow triangle and reset flash counts in ODIN mode. It also puts your phone in ODIN mode by simply plugging it into the USB port of a powered down phone. Once in ODIN mode, you can reflash a stock ROM, recovery, etc. You can buy these for around $20 or less on the web.
If this does not work, I'm afraid nothing will.
Good luck.
Click to expand...
Click to collapse
Somewhere in the thread an answer exists. You are not the first to do this.
I think the jig is the best way.
Sent from my SPH-L710 using Tapatalk 2
I am at my wits end right now. I can see my phone on com3 when it is booted up all the way, but it will not see it when in download mode. I erroneously flashed this file earlier, forgetting I did not have a regular GSII: I9100_APBOOT_I9100XXKP2_CL17109_REV02_eng_mid_ship.tar.md5
What other information would help diagnose this problem?
I currently have stock EL26 installed.
Alternatively, is it safe to install CM9 from this recovery? Seems to me I should resolve this first..
edit: I do not have an unrecognized device, I have tried more than one usb cable and port
Try this:
Redownload the drivers for the phone, install them and let your cpu reset. See if Odin sees your phone then.
I know with my GT10.1 it takes a few seconds more for Odin to see it so... But my ET4G pops up pretty fast.
The EL26/CWM is the kernel/recovery that you want to use when your flashing CM9 Alfa 5 and below.
But like you said... You may want to figure out why Odin isn't seeing your phone when it's in download mode.
Also... Do you have Kies installed on your cpu??? It'll cause problems with Odin to.
Have you tried Mobile Odin for what you want to do. I do almost everything involving CM and flashing with it. Works like a charm.
Sent From My Galaxy Class Star Fighter...
How in the hell do you forget you don't have a international version?! Smh
Sent from my SPH-D710 using xda premium
fryingpan0613 said:
How in the hell do you forget you don't have a international version?! Smh
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
WoW... He just edited his post as I was replying... Doesn't flashing an international tar mess up the bootloader??? I'm really not to sure where you go next.
If his phone still boots up okay couldn't help still use Mobile Odin and flash the right setup.
What was that old school Saturday morning psa... "Reading is fundamental" or something like that.
Sent From My Galaxy Class Star Fighter...
What is the right setup to use? A fresh GB rom install? I am at a loss at this point.
Yeah I ****ed up, I have not messed with my phone in many months.
Edit: driver reinstall did not work, do not have kies installed. mobile odin works on GB then? I can use the e4gt-autofix if that makes a difference. Updating from the stock recovery does not seem to work, it will start, then give me the ! triangle with sad android.
hilo4321 said:
What is the right setup to use? A fresh GB rom install? I am at a loss at this point.
Yeah I ****ed up, I have not messed with my phone in many months.
Edit: driver reinstall did not work, do not have kies installed. mobile odin works on GB then? I can use the e4gt-autofix if that makes a difference. Updating from the stock recovery does not seem to work, it will start, then give me the ! triangle with sad android.
Click to expand...
Click to collapse
Unfortunately my friend, I think you are hosed. The international PIT file is exceptionally different from the one we use for our phone. I don't remember the specifics but basically it remaps your partitions and causes USB to not work correctly. Your best bet is to try a JTAG service. I've heard MobileTechVideos.com is pretty well rated.
Sorry!
My phone is currently functioning properly when booted up. What are the implications of this beyond not being able to change roms (and not having a notification bar..wtf)?
Edit: ok I take it back, mass storage is not working either. also, I am definitely willing to buy Mobile Odin if anyone has any ideas.
hilo4321 said:
What is the right setup to use? A fresh GB rom install? I am at a loss at this point.
Yeah I ****ed up, I have not messed with my phone in many months.
Click to expand...
Click to collapse
Not getting on you m8 but... Flashing a rom for another device even if it's the same model is really really bad. Like rwilco said, yes the International GS2 and our ET4G's are the same devices but there software is very different.
hilo4321 said:
My phone is currently functioning properly when booted up. What are the implications of this beyond not being able to change roms (and not having a notification bar..wtf)?
Click to expand...
Click to collapse
Well... Like you said, most likely you will not be able to make any changes as in roms, kernels or things like that. And if you have any hardware issue you won't be able to get any support from Sprint. And you sure as hell won't be able to receive any OTA's from Sprint or Samsung.
Can you do something for use... Go to "Settings" then "About Phone" and under "Model Number" & "Baseband Version" and tell us what it says there.
I'm not really sure this would/can help you but if your phone still boots and runs you maybe able to Odin the right tar file and see if that fixes it. I mean it could work but I really doubt it. And what's the worst that could happen... It could brick it, then you could file an insurance claim... Just saying...
Where did you get the file from that you flashed??? Most likely not from this (ET4G) forum, should have read up a bit more before you started messing around with flashing roms again. Some things aren't easily fixable.
Sent From My Galaxy10.1 Class Starship....
I am a lucky SOB. I was able to use e4gtauto-sfx to put el29/CWM back on to my phone, and as a result I restored my nandroid backup. I have full function back, except, of course, no odin in download mode.
My baseband is S710.10 S.EK02 with standard model number sph d710.
I believe it came from the android forums, but like i said it was in the SGII area.
What tar file would I be looking for?
Doing some research m8... Give me a few mins....
Make sure you have Mobile Odin installed.
Sent From My Galaxy Class Star Fighter...
hilo4321 said:
I am a lucky SOB. I was able to use e4gtauto-sfx to put el29/CWM back on to my phone, and as a result I restored my nandroid backup. I have full function back, except, of course, no odin in download mode.
Click to expand...
Click to collapse
Ok... Yes you are my friend!!!! But I fear we are not completely out of the woods as of yet. You still have the "no Odin in download" thing still. And that could still be an issue, but at least your back up and running.
hilo4321 said:
My baseband is S710.10 S.EK02 with standard model number sph d710.
Click to expand...
Click to collapse
This is telling me that your on an older baseband... I'm running CM9 and my baseband reads "EL29" which I think is the most resent/updated baseband. I don't want to scare you but I really wish a dev would jump in here and shed some of there wisdom. (I'm almost to the point where I'm winging it.) But I feel we need to get your baseband to EL29.
hilo4321 said:
I believe it came from the android forums, but like i said it was in the SGII area.
Click to expand...
Click to collapse
From now on promise us you'll just use this site and forum for all of your download needs.... Please.
hilo4321 said:
What tar file would I be looking for?
Click to expand...
Click to collapse
Try this post... http://forum.xda-developers.com/showthread.php?t=1433101
Follow the instructions for the Android Install, about halfway down in the first post.
Sent From My Galaxy10.1 Class Starship....
Oh sweet Jesus, I promise.
Now when I do this will this wipe everything? I'm not terribly clear on that. Seems to me that it will.
I really appreciate the help man.
There are 2 different versions... One will wipe everything and one will leave all of your user data intact.
And like I said, I'm not a 100% sure this will fix it but I think we are moving in the right direction.
And not a problem... It's helping me learn more about what goes on inside our devices.
I am still a little worried about your bootloader though. If that was jacked up by flashing the wrong rom I don't know if this will fix it.
Question, when you hook up your device to your cpu when it's booted up are you still able to do things like transfer files and such???
Sent From My Galaxy10.1 Class Starship....
I can use mass USB now. I wont be able to test the el29 now though as I'm away now. I will report back when I can.
hilo4321 said:
I can use mass USB now. I wont be able to test the el29 now though as I'm away now. I will report back when I can.
Click to expand...
Click to collapse
That's great brother.... I'm really glad I could help ya get up and running to the point where you can a least have a use able device.
Sent From My Galaxy10.1 Class Starship....
EL29 was the last version of Gingerbread put out. You'll be able to use mobile Odin to flash stuff but you'll never get the USB to recognize in DL mode. I think jtag might be the only way to restore complete functionality.
---------- Post added at 11:42 PM ---------- Previous post was at 11:36 PM ----------
For now you'll be alright as long as you can get into recovery mode fine then you can flash modems in there(since mobile Odin can't flash them for our phone).
Your baseband (modem) should not matter and changing it won't have any affect on your problem. Good luck and let us know how out turns out.
Solved
I am posting now in case someone comes upon this post down the road.
I am now running cyanogen 9 on my e4gt. This thread saved me, as I was finally able to get odin to work. With that, I was able to flash a new recovery onto my phone (I used StockCWM-EL26). Then once I got that on there I flashed over to the Beta 1 build of Cyanogenmod for e4gt.
I'm sorry I can't be more clear or provide links, it took me a lot of crawling around the forums to figure this out. Perhaps someone more knowledgeable than I can clean up/expand my post. Let me tell you though, it feels really good to get this thing running smoothly again.
If you have any questions I'll try to help.
Good luck, idiot!
That's awesome dude. Remember stay in this forum :beer::thumbup:
sent from MY BAD A$$ ET4G
Hi all,
from a big smile to sad face... that is how it's been for the past 24 hours
I rooted the phone then went to back up the stock rom after that wiped data, cache, dalvik then went on trying to instal Omega 4.0 and suddenly i got this message my external sd is unreadable. rebooted the phone and noticed that it takes me directly to the downloader screen. i tried to fix the phone by bringing it back to it's stock condition but no luck. I used Odin and so far it's the only thing the phone responds to but no luck with fixing it... I am trying to download the official stock fw hint this link
http://forum.xda-developers.com/showthread.php?t=2267895
but it stops and never finishes the whole amount of data... this seems the only way for me revive my phone back to life!
any suggestions what should I do now? it stopped showing the downloader screen now since I flashed the kernel drive for the S4 through Odin and now shows the black screen with the "Samsung Galaxy S4" writing.
by the way it keeps telling me that my phone isn't rooted but I did root it! am using twrp recovery.
I just got the phone from t-mobile 2 days ago and am debating on returning the phone back to them as the phone is still bootable to the recovery and that might revoke my warranty "i guess?"
Is it possible just to walk in to t-mobile store and swap the phone with another one since it didn't pass the 2 weeks returning window? I also got the phone insurance for it.
Please help, I sure need my phone back in working condition...
Omega 4 is for the octa core so thats why your phone bricked. If you can grt into download mode odin the stock files. If you can get into recovery try flashing a rom made for the phone. Dont freak out just read read read and youll be fine.
cwalker0906 said:
Omega 4 is for the octa core so thats why your phone bricked. If you can grt into download mode odin the stock files. If you can get into recovery try flashing a rom made for the phone. Dont freak out just read read read and youll be fine.
Click to expand...
Click to collapse
ayeeee ppl trying to reach me over the phone and they can't because of this stupid brick! well stupid me because I didn't know that Omega is for Octa core phone version... Yeah I can get it to download mode and recovery mode but is it possible just flash the stock file from the recovery instead of odin? I am waiting for that stock fw download to finish hint it's on hotfile and going in turtle speed!
your bricked, im pretty sure flashing stock wont help you (hasnt from my past experience) but doesnt hurt to give it a try.
i dont think will just give you another one, even though its in the two week window, because its your fault and not the result of hardware failure. the age old "oh i updated and not it wont turn on" probably wont wort because there are little to none reports of that happening. plus (and this is me assuming, correct me if im wrong) but when in download mode it probably shows custom status, which auto voids any warranty. but once again, doesnt hurt to try.
Unfortunately, from my past experience, your SOL
If the phone turns on and has download and recovery you are not bricked....only soft brick and the odin file should work. Just be patient and wait for it to finish
TheAtheistOtaku said:
your bricked, im pretty sure flashing stock wont help you (hasnt from my past experience) but doesnt hurt to give it a try.
i dont think will just give you another one, even though its in the two week window, because its your fault and not the result of hardware failure. the age old "oh i updated and not it wont turn on" probably wont wort because there are little to none reports of that happening. plus (and this is me assuming, correct me if im wrong) but when in download mode it probably shows custom status, which auto voids any warranty. but once again, doesnt hurt to try.
Unfortunately, from my past experience, your SOL
Click to expand...
Click to collapse
yeah i have that feeling but again nothing hurts trying... i hope something will work out
thanks for the cheer up though :good: lol
You can get to download mode so don't worry a bit.just flash stock with odin(is odin available for s4?)
Sent from my LT30p using xda premium
cwalker0906 said:
If the phone turns on and has download and recovery you are not bricked....only soft brick and the odin file should work. Just be patient and wait for it to finish
Click to expand...
Click to collapse
fingers crossed!
josephnero said:
You can get to download mode so don't worry a bit.just flash stock with odin(is odin available for s4?)
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
I used odin for the flashing in the beginning i think i have odin v307
I am waiting right now for the download to finish, been waiting for the past 2 hours even though it's slow transfer but steady 250kbps, i failed doing that with the fast link and tried it over 15 times! no luck
theatheistotaku said:
your bricked, im pretty sure flashing stock wont help you (hasnt from my past experience) but doesnt hurt to give it a try.
I dont think will just give you another one, even though its in the two week window, because its your fault and not the result of hardware failure. The age old "oh i updated and not it wont turn on" probably wont wort because there are little to none reports of that happening. Plus (and this is me assuming, correct me if im wrong) but when in download mode it probably shows custom status, which auto voids any warranty. But once again, doesnt hurt to try.
Unfortunately, from my past experience, your sol
Click to expand...
Click to collapse
yes unbricked!!!
Should I proceed with the rooting again and recover the rom then instal CM rom?
Glad you got your phone back....knew you would like I said only a soft brick....if you do continue and please read always so you know what you are doing before you do it afterall these phones are expensive
redshark80 said:
Should I proceed with the rooting again and recover the rom then instal CM rom?
Click to expand...
Click to collapse
Yeah go ahead and root again just be careful with the rom you flash make sure its for m919. I stayed with stock because no rom has the options that came with the phone such as motions and gestures and the camera.
Sent from my SGH-M919 using xda premium
cwalker0906 said:
Glad you got your phone back....knew you would like I said only a soft brick....if you do continue and please read always so you know what you are doing before you do it afterall these phones are expensive
Click to expand...
Click to collapse
Thanks! indeed they are expensive
atlprettygirl2145 said:
Yeah go ahead and root again just be careful with the rom you flash make sure its for m919. I stayed with stock because no rom has the options that came with the phone such as motions and gestures and the camera.
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
I just did the motochopper method and as I am reading now about the possibility of loosing your root access by future OTAs so am planning to flash that file that keeps your root safe even from future updates "SetUID Restriction" I will prolly keep my basic rom and wait for something better in future.
Thanks
atlprettygirl2145 said:
Yeah go ahead and root again just be careful with the rom you flash make sure its for m919. I stayed with stock because no rom has the options that came with the phone such as motions and gestures and the camera.
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
Ummm all TW ROMS on the development forum have the exact same features that come with the phone except they're tweaked....
whytechapel_x said:
Ummm all TW ROMS on the development forum have the exact same features that come with the phone except they're tweaked....
Click to expand...
Click to collapse
would you suggest me instal the CM? I am debating over here and for sure I will make a good use with the space that can free if I do... hint I have a 64gb msd installed on the phone
the motochopper root didn't go through by the way so I used odin and patched twrp plus did the SetUID restriction thing.
thnx
redshark80 said:
would you suggest me instal the CM? I am debating over here and for sure I will make a good use with the space that can free if I do... hint I have a 64gb msd installed on the phone
the motochopper root didn't go through by the way so I used odin and patched twrp plus did the SetUID restriction thing.
thnx
Click to expand...
Click to collapse
Well if you want to flash CyanogenMod, make sure its for the m919. I'm kinda lost though, did you still want all the features that Touchwiz has like air gesture, motions etc? Or you don't care for those?
whytechapel_x said:
Well if you want to flash CyanogenMod, make sure its for the m919. I'm kinda lost though, did you still want all the features that Touchwiz has like air gesture, motions etc? Or you don't care for those?
Click to expand...
Click to collapse
am not really decided about that, does it really matter? all i care about is the blazing speed, low battery consumption and for sure the freedom of moving all the apps to the extSD ... I think all these new features are gimmick and it may take another generation for it to get the best of it. I picked S4 over the HTC one just because the 1080p feature and the funny thing is that I missed on there is no HDMI port on this phone! lol no biggie
tell me more about the touchwiz kernel, is it worth it? I don't see many CRs out there at the moment
redshark80 said:
am not really decided about that, does it really matter? all i care about is the blazing speed, low battery consumption and for sure the freedom of moving all the apps to the extSD ... I think all these new features are gimmick and it may take another generation for it to get the best of it. I picked S4 over the HTC one just because the 1080p feature and the funny thing is that I missed on there is no HDMI port on this phone! lol no biggie
tell me more about the touchwiz kernel, is it worth it? I don't see many CRs out there at the moment
Click to expand...
Click to collapse
Well right now I don't think CM is as stable compared to a TW ROM. FYI there are a lot or ROMS as of now. You have Wicked, Infamous, Darth Stalker, Deathstar. There is also faux and ktoonez kernal available for TW. As for the extsd, you will need to format the card to fat32 for the phone to read it properly.