i am using windows 7 64 bit
whan i turn of my arc and hold down the menu button and connect the usb cable its show me the sonyericsson notification and start to charge the phone
and not connect with blue led notification so i cannot flash it or cant do any thing
please tell me where i an wrong
To flash, hold down the back button when inserting the usb(on the left)
Sent from my LT15i using XDA App
zohaib0001 said:
i am using windows 7 64 bit
whan i turn of my arc and hold down the menu button and connect the usb cable its show me the sonyericsson notification and start to charge the phone
and not connect with blue led notification so i cannot flash it or cant do any thing
please tell me where i an wrong
Click to expand...
Click to collapse
menu button (on the right) + USB = blue led = it does'n work for every type of phones
http://unlockbootloader.sonyericsson.com/instructions
You will now be asked for drivers. Point to the usb_driver-folder where you placed the android_winusb.inf-file, and select the Android Bootloader Interface-file. If you are not asked for drivers, and your phone starts to boot as usual, it is not possible to unlock the boot loader on your phone.
Related
I've tried to flash "LT15_LT18_70_Baseband.ftf" on Arc phone using flashtool 8.0.0 x64, flashtoox64.exe.
I pressed flash button and check flashmod and OK, select "LT15_LT18_70_Baseband.ftf" and selected all sins and ok. Then I got usb connection guide screen and I plugged usb in arc as described at usb connection guide screen.
But the "usb connection guide screen" didn't disappear and I got these logs at flashtool application.
Please connect your device into flashmode.
- Device connected in fastboot mode
INFO - List of connected devices (Device Id) :
INFO - - USB\VID_0FCE&PID_0DDE\CB5A1FWGV2&ZLP Driver installed : true
INFO - List of ADB devices :
INFO - - none
INFO - List of fastboot devices :
INFO - - none
INFO - Device disconnected
And I tried usb connection with "flash.exe", then I got this attached picture, and still the "usb connection guide screen" didn't disappear as shown in the attached picture.
Please let me know how to connect my arc phone into flashmode.
Thanks in advance.
Have you put it in flash mode? I.e. Turn off the phone hold the menu button then connect the USB?
Sent from my LT18i using XDA
No, I pressed "Back" button as described at flashtool.
comocandle said:
No, I pressed "Back" button as described at flashtool.
Click to expand...
Click to collapse
Press and hold.
Yes, I pressed and holding "Back" button I plugged usb.
But still flashtool shows "INFO - Device connected in fastboot mode".
Phone should be in Mass Storage Mode (MSC) and you need to switch off your phone. Press and hold Back when flashtool tells you to do so, plug in the USB and release Back only when instructed.
xtacy!/ Yes, I checked MSC, and pressed and hold "Back" button when the guide picture appear.
I also tried at safe with networking, but same result.
" INFO - Device connected in fastboot mode "
This log was loaded.
Try using Media Transfer mode.. To be honest, i never used MSC mode in my lifetime while flashing with FT and has always been in MT mode..
Sent from my LT15i using XDA
Same here. I've never really used MSC mode. I prefer MTP. But the instructions say to use the former. Oh well.
Swyped from my SE Xperia arc (LT15i) using Tapatalk 2
gire.prasad/ Thanks.
I changed twice, then it works.
If it tells you you're on Fastboot mode, then it's not the correct key you're holding. If it needs flashmode, your led should turn green, if it turns blue, it's on Fastboot mode.
You can try this by powering off your phone and trying holding down keys until the green led is on. (Dunno which one is for Arc, I have a Pro).
I just got a Sony XPeria Play from Ebay, and it doesnt turn on, ive charged it, but it doesnt vibrate or anything. But it does charge perfectly fine. Please could I have some tips? PC Companion won't help and I have taken the battery out and put it back in countless times.I also need some help with fast booting my phone
How can you tell it's charging?
Are you using USB to computer or USB to wall?
I can tell its charging because the screen goes to the charging icon, and I'm using usb to computer.
If you hold the search button while its off and conect the USB to your PC does the power button light turn blue? If so you can try flashing back to stock rom.
Or if you hold the back button and connect does it turn green?
Sent from my R800i using XDA
Yeah it does turn blue, but the power button doesn't respond to me pressing it...
remove the usb and make sure everthing is off, now remove the lid of the phone and press the power button. Remember you have to leave it press a couple of seconds
I've got a feeling the power button is stuffed... It still won't do anything when I hold the power button
i would also think is the power button, cause if you hold the search button and plug the phone while it of and the led on the power button turns blue, and if you hold the back button instead and it goes green, i would say that the power button is definitively the problem
Ok..don't press the power button if you're trying to put it into flash or fastboot mode. It sounds like it's one of two things: 1. the button itself is not making contact OR part of the board is busted. Either way, if you have flashtool then hold back and plug it in the usb, flash the stock ftf and flashtool will boot your phone for you.
I hope its the former! Also when I turn on flashtool, it says I need drivers, where do I get them from? Sorry for my nooby questions.
EDIT: Found the driver installation file, now I just need a stock ftf
Quarterflip said:
I hope its the former! Also when I turn on flashtool, it says I need drivers, where do I get them from? Sorry for my nooby questions.
Click to expand...
Click to collapse
It's ok mate don't worry, it's not being nooby
Here is the link for those drivers:
https://rapidshare.com/files/1146432065/Flashtool-drivers.exe
Install it fully, so once you open it click next and tick all the boxes. I know some are useless but just incase select all. Thats what I did It will take a bit of time I know and messages keep poping up and just go along with and it will eventually finnish. I had this problem too.
You can find this driver installation file in the directory of flashtool aswell.
It should be in -> C:\Flashtool\drivers or something like that.
Good luck
Ok so I need a stock ftf file...
Quarterflip said:
Ok so I need a stock ftf file...
Click to expand...
Click to collapse
Mybe u should jst try reboot using command prompt 1st. Jst to be sure that is related to the power button or not. Install all driver. Mke sure the phne is off, hold the search button n connect to the pc n see light turn blue. After that open command prompt n type "fastboot reboot". If it reboot then u'll know its the power button related.
Thanks vokal1992
Do this:
1.- Open flashtool
2.- Hold the search button on your phone
3.- Connect usb cable while holding the search button
4.- In flash tool press the lightning icon
5.- Select fastboot mode
6.- Select Reboot in system
7.- Enojoy
Hmm, now I'm thinking it's a broken battery, because it gives up on me as soon as I unplug...
Quarterflip said:
Hmm, now I'm thinking it's a broken battery, because it gives up on me as soon as I unplug...
Click to expand...
Click to collapse
if you are trying this
elnacho said:
Do this:
1.- Open flashtool
2.- Hold the search button on your phone
3.- Connect usb cable while holding the search button
4.- In flash tool press the lightning icon
5.- Select fastboot mode
6.- Select Reboot in system
7.- Enojoy
Click to expand...
Click to collapse
Unplug it after it reboots
It reboots into the charging thing and when I unplug it, it dies.
in flash tool, does it say connected in fastboot mode?
U need to enable the usb debugging to be able to reboot using flashtool. Mybe the easiest way is to flash another stock .ftf.
Thanks vokal1992
well, if you need to flash ftf heres a list of them:
http://forum.xda-developers.com/showthread.php?t=1589399
Hello sorry my english is bad. I got problem with my phone. Phone dont turn on, when i connect to wall charger or pc only red led turn on. Pc see phone as semc usb device. When a try to flash with flashtool only this show device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode how i can turn on debugging usb when i cant run the phone. Seus dont see phone. Please help.:crying:
Try this method
If it helps you then thank me
First off everything remove the SIM card and let the phone rest for five minutes and put the SIM and
Press the power button and volume up button at the same time for little long time your phone wil start as normal
Some times **** happens bro
Sent from my LT26i using xda app-developers app
Dont work for me
lukasz8504 said:
Hello sorry my english is bad. I got problem with my phone. Phone dont turn on, when i connect to wall charger or pc only red led turn on. Pc see phone as semc usb device. When a try to flash with flashtool only this show device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode how i can turn on debugging usb when i cant run the phone. Seus dont see phone. Please help.:crying:
Click to expand...
Click to collapse
Connect in flashtool, relock bootloader. Use seus to install fresh fw.
lukasz8504 said:
Dont work for me
Click to expand...
Click to collapse
Ok i find this tread http://forum.xda-developers.com/showthread.php?t=1527159 but when i try to enter flashmode i see this message device conected with usb debugging off for 2011 devices line be sure you are not in mtp mode
Try to use a different charger. I got the same bug with a sola . It worked with a samsung wallcharger. The sola was not loading with the sony charger when i turned it of. Other's reported this bug when phone turns off because of empty battery.
I try charger from se x10, xperia s, iphone 3gs and zte blade and nothing change still red led and after few minute red turn off and then pc see phone but in flashtool only this message device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode
lukasz8504 said:
I try charger from se x10, xperia s, iphone 3gs and zte blade and nothing change still red led and after few minute red turn off and then pc see phone but in flashtool only this message device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode
Click to expand...
Click to collapse
I think your phone hard bricked !
In this situation if you couldn't reset your phone by holding power+volume up till it 3 times vibrate , try power+volume down when you connected to pc sometimes it reset your phone.
try power+volume up when you plugged in wall charger till 3 times vibrate ( in some situations it happens after 30 second you hold both.
If none on this reset your phone , its only way that you send it to repare service of sony to re write your bootloader by JTAG box. I had the same problem when I install an improper kernel and I search all of net and try all thing I found but after 2 week I can't solve the problem and only way to back your phone to work is, re writing your bootloader by JTAG box
Anybody can help? maybe trim area problem??
that happened to me once. I removed the battery, connected the wall charger, and then put the battery back. It was the last thing I tried and it worked.
(Yes, I had to open the phone, so I don't have warranty)
waiflih said:
that happened to me once. I removed the battery, connected the wall charger, and then put the battery back. It was the last thing I tried and it worked.
(Yes, I had to open the phone, so I don't have warranty)
Click to expand...
Click to collapse
I try this and red led blink now
Can you now plug in to pc holding volume down to get flash mode though?
Sent from my LT26i using Tapatalk 2
When i connect to pc with volume down in flashtool see for devices 2011... mtp mode, device manager show semc flash device and somthing new sony ericsson seehcri control device
Does the led stop going red then?
Sent from my LT26i using Tapatalk 2
Yes when connect to pc red led turn off, flashtool see phono but not in flashmode
Did you repaired it bro
No my phone is in second service and i must wait. I find possible solution but cant try it. http://forum.xda-developers.com/showthread.php?t=1910029
Are you sure you're connecting.phone to PC in flashmode? (holding down the volume button while plugging in the phone)
Good luck there then
lukasz8504 said:
Hello sorry my english is bad. I got problem with my phone. Phone dont turn on, when i connect to wall charger or pc only red led turn on. Pc see phone as semc usb device. When a try to flash with flashtool only this show device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode how i can turn on debugging usb when i cant run the phone. Seus dont see phone. Please help.:crying:
Click to expand...
Click to collapse
I had this pr0blem but s0lved it ..!!"
Jxt remove y0ur sim card wait f0r 10 sec0ndz Then v0lume up + P0wer f0r 5 sec0ndz and the ph0ne will vibrate 3 times after that release butt0nz n p0wer 0n the device d0nt plug in the charger then it will turn 0n and say shutting d0wn and after when it shut down plug it ........ Pr0b s0lved
i want to unlock bootloader of xperia ion LT28h(6.1.E0.233) android version 4.0.4 . i got my key from http://unlockbootloader.sonymobile.com
but when i try to put my ion in fastboot by holding the volum up key and connect it with pc the blue led shine for some second and then red led shine and phone is charging...
viral316 said:
i want to unlock bootloader of xperia ion LT28h(6.1.E0.233) android version 4.0.4 . i got my key from http://unlockbootloader.sonymobile.com
but when i try to put my ion in fastboot by holding the volum up key and connect it with pc the blue led shine for some second and then red led shine and phone is charging...
Click to expand...
Click to collapse
Did you check if Unlocking bootloader is allowed first in the service menu ?
Karim Kahale said:
Did you check if Unlocking bootloader is allowed first in the service menu ?
Click to expand...
Click to collapse
Yes mate I Check. It say allow unlock bootloader : Yes.
See the screenshot.
Sent from my LT28h using Tapatalk 2
viral316 said:
Yes mate I Check. It say allow unlock bootloader : Yes.
See the screenshot.
Sent from my LT28h using Tapatalk 2
Click to expand...
Click to collapse
Are you sure then that you're holding the right keys, maybe you should try different buttons.
Karim Kahale said:
Are you sure then that you're holding the right keys, maybe you should try different buttons.
Click to expand...
Click to collapse
Yes mate i search a lot and for xperia ion
Volume Up + USB cable connected to PC -> FASTBOOT MODE (BLUE LED will light up)
Volume Down + USB cable connected to PC -> FLASHMODE (GREEN LED will light up)
when i connect it to pc while holding volum up key the blue led light up for around 10 second and then its off and red led light up and phone is charging...
viral316 said:
Yes mate i search a lot and for xperia ion
Volume Up + USB cable connected to PC -> FASTBOOT MODE (BLUE LED will light up)
Volume Down + USB cable connected to PC -> FLASHMODE (GREEN LED will light up)
when i connect it to pc while holding volum up key the blue led light up for around 10 second and then its off and red led light up and phone is charging...
Click to expand...
Click to collapse
1-Download first Android SDK
2- Open device manager in windows
3- Connect usb cable to your phone pushing vol up button
4- Device manager will show you fastboot device for 2-3 sec (before the phone goes to charge mode). Right click on fastboot device and install drivers from C:\Android\sdk\extras\google\usb_driver
4) Reconnect usb cable pushing volup button
Karim Kahale said:
1-Download first Android SDK
2- Open device manager in windows
3- Connect usb cable to your phone pushing vol up button
4- Device manager will show you fastboot device for 2-3 sec (before the phone goes to charge mode). Right click on fastboot device and install drivers from C:\Android\sdk\extras\google\usb_driver
4) Reconnect usb cable pushing volup button
Click to expand...
Click to collapse
it did't work mate...
but i download SE Bootloader_Unlocking_Relocking_1.6 and in this i found Flashtool-drivers and i install this driver and it work...now i can put my ion in fastboot mod...Thanks...
Regards
Viral
Iso I was following the instrucitons in the official sony site on how to unlock the boot loader
and when i get to the step where I have to press the volume up button and plug the usb cable the led light goes blue for 5 sec and then the sony logo come I tried it on another pc still same problem
marwan4449 said:
Iso I was following the instrucitons in the official sony site on how to unlock the boot loader
and when i get to the step where I have to press the volume up button and plug the usb cable the led light goes blue for 5 sec and then the sony logo come I tried it on another pc still same problem
Click to expand...
Click to collapse
Make sure u have installed proper drivers... and the port you r using must be usb 2.0
i have same problem any solutions ?
i have drivers installed and usb 2.0
Google 'flashtool drivers' and install the drivers. This works for me.
marwan4449 said:
Iso I was following the instrucitons in the official sony site on how to unlock the boot loader
and when i get to the step where I have to press the volume up button and plug the usb cable the led light goes blue for 5 sec and then the sony logo come I tried it on another pc still same problem
Click to expand...
Click to collapse
That is another way. You can just navigate into flashtool folder and search for driver setup and install the fastboot driver
Type your command and press enter will show waiting for device
Then connect the phone in fasrboot
The command will be executed
Try this. Hope it works
Sent from my Xperia ion using XDA Premium 4 mobile app