Related
So... all of a sudden, everytime i slide the screen up, it shuts the screen off. I slide it back, hit the power button a few times, then it turns back on?
NRG GTX 5/9 release
TMO USA
Is my screen busted?
Power off your phone, remove the battery and then put it back in, making sure it fits in there snuggly.
That has happened to me, and removing/replacing the battery fixed it.
Yes, as Amy noted this behavior is often attributed to the battery not sitting exactly right in the compartment. Sometimes just popping it out and back in is enough, but some people have reported needeing to slip a small piece of paper or something similar under the battery cover as well to help keep it snug. (It seems that the sliding motion can be enough to shake the battery off the contacts if it's not secure enough).
Let us know if that clears it up
okay. what the deuce.
my tp2 just literally started doing the same.
earlier today it was perfectly fine.
but now.
i slide out the keyboard and the screen goes blank.
i tried the remove battery and restart.
didn't help.
i tried the paper between battery and cover.
didn't help either.
the screen only goes blank when completely slid out.
if i hold it open just before completely open the screen is still on.
any suggestions?
thanks.
Yea, none of those things worked. However, keeping the battery snug helped with the issue of not hearing anything through the handset.
It honestly sounds to me like both of you are dealing with a loose connection between the screen and the motherboard somewhere, either power or video feed, can't say for sure which. Unless you're willing to disassemble your rhodium (which isn't impossible, just complex), it sounds like it's time to send it to a service center (for AT&T) or to HTC, since that would be a warranty repair.
I hope that this is just freak coincidence that both of you had this happen just now, and not a sign that we're all at risk of having the same issue eventually
How long have each of you had your phones?
EDIT: One more question for you guys...whatever is on the display on your screen rotates into landscape before the display shuts off right?
sirphunkee said:
It honestly sounds to me like both of you are dealing with a loose connection between the screen and the motherboard somewhere, either power or video feed, can't say for sure which. Unless you're willing to disassemble your rhodium (which isn't impossible, just complex), it sounds like it's time to send it to a service center (for AT&T) or to HTC, since that would be a warranty repair.
I hope that this is just freak coincidence that both of you had this happen just now, and not a sign that we're all at risk of having the same issue eventually
How long have each of you had your phones?
EDIT: One more question for you guys...whatever is on the display on your screen rotates into landscape before the display shuts off right?
Click to expand...
Click to collapse
i have own the phone for about three weeks...
though. bought it used from a friend who had it for four months.
but my friend bought it used from somebody too...
aka. not sure how long it has been used.
the display is rotated. and stays on as long as the right side is held.
before the 'tilt piece' is revealed. as soon as it is. the screen goes blank.
and i believe it would be the video feed...
i can still type with the keyboard. just can't see what i am typing.
unless i hold the screen from sliding completely out on the right.
and about the warranty...
would i have a warranty with htc still?
don't have proof of purchase.
just the phone and original box.
thanks.
My AT&T Tilt 2 has been exhibiting this behavior for some weeks now. It seems to be centered around the keyboard slide, but the behavior comes and goes. I found that slamming the phone on the desktop would bring it back to life for a little while, but then it would start to clap out again in a few days. What a pile.
Anyway, I have a fresh one from AT&T to swap out. Now all I have to do is get all my applications and stuff transferred over to the new phone before sending the craprod back to them.
sh4d0w86 said:
i have own the phone for about three weeks...
though. bought it used from a friend who had it for four months.
but my friend bought it used from somebody too...
aka. not sure how long it has been used.
and about the warranty...
would i have a warranty with htc still?
don't have proof of purchase.
just the phone and original box.
thanks.
Click to expand...
Click to collapse
Oh boy...yeah I didn't realize you'd gotten it third-hand. Well it has been less than a year since the Rhodium was released, so it's possible that HTC will still honor the 1-year manufacturer's warranty, but I can't guarantee it. My suggestion would be to just contact HTC America's service group (1-888-617-1113) and see what they say.
Best case: they agree to cover the repair
Worst case: an example of one of the risks you take when you buy something through "unofficial" channels
Yea luckily for me, I bought it second hand, but it was purchased from a retail store, meaning I got a warranty exchange. I just sent it back.
having same issue
im having same issue, when the phone is slid open, goes black, nothing gets it back on, the buttons light up, display dead
however, if i place it in stand by via power button in regular mode, then slide it open, it works, ive rattled and shook the phone, never goes back off, im typing this with it open and tilted....
any ideas?
prob leaving the htc community, samsung captivate, blackberry torch, or htc aria are my choices from at
Last night I was out and during the night I pulled my desire z out of my pocket to find that the screen was dead, the soft touch buttons were still lit up and working but no display. I pulled the battery and tried to reboot and no luck, you can hear it booting and even unlock/receive calls and txts etc once it has booted up just the screen stays blank the whole time so have to do everything on feel.
Essentially does this just mean my screen has a hardware fault? is it worth trying to fix? I assume the only option would be to purchase a replacement screen and dissemble and reassemble it?
(warranty is not worth it as I live in New Zealand and would have to send my phone back to the UK where I bought it from, also I have dropped it quite a few times so probably voided anyway...)
Thanks in advance for any input
Does it never display anything? So not even a flash during boot or something?
Because then it is probably a hardware problem.
Since the soft touch buttons do still work I think there might be a little crack or something in the flat cable that connects the bottom half with the top.
Maybe you could check whether you can see if the cable is broken or not?
The best thing to do then is to look for a replacement and try to fix it yourself or bring it to a shop where they can do it for you.
No it never displays anything, completely dead the whole time. The touch input is still working though as I answered a phone call this morning on it by making the usual gesture just without being able to see anything. Doesnt seem to be anything wrong with the cable itself as far as I can see. Yea might have to get someone to have a look at it.
My phone is acting the same. I dropped my phone in the pond before, but pulled battery out on time and had it in rice for a day. My phone was still working for about two weeks after that incident. I dropped it and had one little crack at the top of the screen and about a week after that it died when I had a water balloon fight with the phone in my pocket. D;
Do any of you know if the replacement lcd screen/digitizer for the Desire Z would work for the G2?
I had the same thing happening to my G2 screen, only it was intermittently working for a little while, then just completely died and wouldn't work. It was doing this crazy flickering thing then the back light wouldn't go on at all. If I held the phone at a certain angle in the sun, I could see that the pixels were indeed working on the display, but there was no backlight to make them normally visible.
So I purchased a replacement screen from ebay and carefully followed the directions on a youtube video for a G2 take apart. Its not a hard task to take apart and get down to the screen itself. It was rather easy. After putting it back together the screen still didn't work! Sounds work, i can also receive calls etc. But the screen still doesn't work!
Is there any way that this could be a software issue?
Oh and PS, I believe the LCD replacement would work for both the desire Z and the G2. They are identical phones after all right? I'd say its a safe bet. The screen I bought was only 35 bucks. Didn't think that was a bad deal.
Another dead screen or something else?
Few days ago my phone fell of the couch onto a rug - no big deal, so far it has survived much worse, but when I picked it up, the colors were all messed up - overly green and red. Tried restarting - no luck. Everything worked fine, except the colors, but then the screen turned of completely. I could hear notifications, phonecalls, but the screen was dead. After some tapping on the screen, it turned on again - with ****ed up colors. Then started flickering and was gone again. Few more times I could turn it on by tapping before it was dead for good.
Figured, after all these drops it survived, maybe the screen connector is a bit loose. I mean, I could sometime get a contact when tapping it, so I dissasambled it completely, secured all the connection, put it all back tougether and fired up - same thing: dead screen, phone working.
Has anyone had such problem before? Is it screen that is dead, or connector or... I have no clue... I would like try to fix it on my own, with some replacement parts I could get on ebay - but, what gave?
Hello Nexans,
Long story short:
I was applying SGP's flex to my phone yesterday. Too much water maybe, my phone started acting weird after installation, really dimmed display, touch screen not registering touch, and etc.
So I opened up the phone per ifixit's instruction, attempting to see if there's really any water in there so I can dry the components up.
At the time of opening it up, didn't notice any water at all, while the screen still remains not responding. At the end, the phone finally failed to boot (white Google screen looping). So I put everything back on, and finally leave it looping on my desk while I went out trying to have some fun in order to blow away this Saturday night sadness.
Magically, when I returned home after ~5 hrs, the phone is in the system and the touch screen works perfectly again. Also, the screen is showing images normally again. I happily went to bed with my phone.
This [sad] morning, volume button won't work. Opened it up, found that the volume switch (which was soldered onto the mobo) was ripped off (probably by careless me). Refer to this pic here. EDIT: sorry I still can't post outside link.
Here's the image: guide-images.ifixit.net/igi/2k6S4vvKPZh2IsB2.huge
Now I'm left alone: the phone is a imported GSM, seemingly not supported by anyone in the U.S. right now. Moreover, since the volume switch is soldered onto the mobo, and I am very sure I will ruin the phone if I try to re-solder the switch onto the mobo (it's some finest soldering on there), not to mention that the Cable Ribbon of the volume switch seems to be ruined as well, I think my only option is to get a totally new mobo that has volume switch soldered onto it.
To summarize:
1.Do I need a new mobo, if I find no one to help me repair the phone?
2.Where can I get a new mobo? (searched on eBay w/o results)
3.Will changing the mobo affect anything? I assume the data and system would be lost, but how about the identity of my phone?
4.If there's one agent in the U.S. that you think would take care of this uncostly (~$100?), who would you refer? Maybe Verizon, Samsung, or someone else?
5.If all of the above attempts fail at the end, I'll be considering selling it at a deep discount to someone who's got his way of restoring this phone, where would you recommend for me to go find such a talented Nexus lover? Will eBay fulfill this purpose the best?
Finally, thanks for you, the fellow members, for your help in advance. I hate myself for opening up the phone, now, thinking that the phone may have recovered for good w/o being opened up by me. Now that it has recovered with a broken volume switch in its body, making this issue much more complicated
Again, thanks...
shoulda turned off the phone right after it started acting funky and put it in a bag a rice
it sounds like you jumped the gun and opened the phone prematurely. How long did you wait to open up the phone after you installed the screen guard?
As far as your situation, I would probably cut my losses, get what I can out of it on eBay and buy another one.
Sent from my GSM Galaxy Nexus using Tapatalk
mush03 said:
shoulda turned off the phone right after it started acting funky and put it in a bag a rice
Click to expand...
Click to collapse
Should have I also shouldve stayed with a dry apply film. Being a perfectionist, I almost knew I would ruin the phone by over spraying the application solution for a easier and better application
Ulver said:
it sounds like you jumped the gun and opened the phone prematurely. How long did you wait to open up the phone after you installed the screen guard?
As far as your situation, I would probably cut my losses, get what I can out of it on eBay and buy another one.
Sent from my GSM Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Actually, immediately. I didn't know the gaps around the glass screen is also the entrance for the water to get into the phone. I thought only headset speaker could let some water into it. After disassembled the phone, I realized that the water can easily get into the phone thru the gap, which leads the water right onto the mobo underneath the glass... Again, I didn't notice any water inside the phone, but i could be just moisture that's playing some nasty game here. I also did some intensive swing and tossing of the phone to get water out, until there's no water coming out.
Anyhow, I just went to Verizon store, and they said they wouldn't touch anything GSM, and said the only option for me seems to contact Samsung. Or as you said, I could sell it on eBay. Don't know how much it's worth though
I had to open up my Gnex last week because i dropped it in a puddle of water while getting out of my car...
If i remember correctly, the vol rocker is glued to the internal part that comes out with the screen and most of the electronics, so i cant imagine how you would have torn it off...
Its connectected to the main pcb via a connector though, sure you didn't just unplug the connector??
You could also try to go without the volume rocker, use some kind of widget for volume control, not ideal but cheaper than a new Gnex
Ooo, I'm sorry for both of us...
Yes, the volume switch is double-side taped, but the other end (the cable ribbon itself) is soldered onto the back of the mobo in my phone. I don't know how or what force ripped it off of the mobo. The cable ribbon is torn pretty harshly... I'll upload a pic when I make past the 10 posts and "unlock all capabilities"..
Also, did you notice any "sequela" after the incident? Does your phone function good now? There's time that on my phone the touch screen does not respond/register touch anymore suddenly. I usually just leave it standby with screen off. Usually, after 1+ hr, when I turn the screen back on, the touchscreen works fine...
Driving me crazy, this bad luck.
Guys,
Here's another issue... How do I get into fastboot mode if my volume rockers don't work..?
Tried Toolkit V4.1 and it keeps saying waiting for device..
cswithxda said:
Guys,
Here's another issue... How do I get into fastboot mode if my volume rockers don't work..?
Tried Toolkit V4.1 and it keeps saying waiting for device..
Click to expand...
Click to collapse
Install the app called quickboot, it lets u go direcrly into recovery or bootloader without holding volume keys.
Thank you sir, I'll give it a try!
OOPS.. I'm not rooted...so it's a no-go
Hey cswithxda, have you found a way to fix it without replacing the mobo?
I live in Brazil, a friend of mine brought one bought at Negri electronics at US for me. It suffered an accident (part of it involves someone pushing down a window over it) and the screen cracked.
I've sent it back to Negri for RMA Repair to fix the screen and they did it, but before shipping back, found that the volume buttons weren't working. They canceled the shipment and found out that the volume cable was broken (the screen crack was near to the volume buttons, so I guess it wasn't them that broke it while fixing the screen).
Well, I've actually paid for the screen repair and ship back, but they claim that their repair facility was unable to fix the volume... any light over this?
cswithxda said:
Guys,
Here's another issue... How do I get into fastboot mode if my volume rockers don't work..?
Tried Toolkit V4.1 and it keeps saying waiting for device..
Click to expand...
Click to collapse
If you have all the drivers type 'fastboot reboot bootloader' in the command prompt
Sent from my Galaxy Nexus using xda premium
tinsukE said:
Hey cswithxda, have you found a way to fix it without replacing the mobo?
I live in Brazil, a friend of mine brought one bought at Negri electronics at US for me. It suffered an accident (part of it involves someone pushing down a window over it) and the screen cracked.
I've sent it back to Negri for RMA Repair to fix the screen and they did it, but before shipping back, found that the volume buttons weren't working. They canceled the shipment and found out that the volume cable was broken (the screen crack was near to the volume buttons, so I guess it wasn't them that broke it while fixing the screen).
Well, I've actually paid for the screen repair and ship back, but they claim that their repair facility was unable to fix the volume... any light over this?
Click to expand...
Click to collapse
Sorry I can't help buddy, at the time I owned the device, it was still pretty new, so I couldn't find a source that actually sells GNex motherboard. I think the only way to fix a ripped rocker button is to replace mobo if you don't find anywhere to solder it for you.
Important part is this, for whoever got the chance, buy it from Amazon! The rep was kind enough to issue me an RMA after knowing my ripped volume rocker is my own fault, and while I was actually trying to ask him about where to send it to fix. They just gave me an RMA and let me send it back and get anything else I want. Amazon customer service another miracle!
nbeebe24 said:
If you have all the drivers type 'fastboot reboot bootloader' in the command prompt
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thanks for the help! altho i returned the device
ok so... the store broke my lcd while they were trying to remove the digitizer... and now i am looking at ebay on which lcd+touch assemlby to buy and i have a question. are the sony, acer and sharp lcd versions compatible with all one x mobos? i did some research and found that the sony version is the best (so they say)
and313 said:
ok so... the store broke my lcd while they were trying to remove the digitizer... and now i am looking at ebay on which lcd+touch assemlby to buy and i have a question. are the sony, acer and sharp lcd versions compatible with all one x mobos? i did some research and found that the sony version is the best (so they say)
Click to expand...
Click to collapse
Hi,
The Sony and Sharp are not compatible with each other( I've tried to replace one with the other), I've never come across the Acer LCD in Australia so I'm not sure. If you don't know how to tell the Sharp and Sony apart, the Sharp has Green backing on the flex cable, while the Sony is sort of orange with a few yellowish stripeson the back of the LCD flex cable. Sorry I couldn't find any of my photos which show the difference. I would recommend buying the LCD/digitizer combo and a separate midframe to mount it on, as it comes with new 3M adhesive, but you may also have to add a few TINY drops of instant adhesive, I say tiny as too much will press out under the digitizer and will show up, but I have found that without it the digitizer will lift from the frame eventually due to the tight fit of the frame in the rear shell of the HOX.
Hope you go ok!
---------- Post added at 06:45 PM ---------- Previous post was at 06:41 PM ----------
Sorry, just a bit of additional info, have also come across posts saying the colours of the LCD look washed out with the wrong LCD.
okhughes said:
Hi,
The Sony and Sharp are not compatible with each other( I've tried to replace one with the other), I've never come across the Acer LCD in Australia so I'm not sure. If you don't know how to tell the Sharp and Sony apart, the Sharp has Green backing on the flex cable, while the Sony is sort of orange with a few yellowish stripeson the back of the LCD flex cable. Sorry I couldn't find any of my photos which show the difference. I would recommend buying the LCD/digitizer combo and a separate midframe to mount it on, as it comes with new 3M adhesive, but you may also have to add a few TINY drops of instant adhesive, I say tiny as too much will press out under the digitizer and will show up, but I have found that without it the digitizer will lift from the frame eventually due to the tight fit of the frame in the rear shell of the HOX.
Hope you go ok!
---------- Post added at 06:45 PM ---------- Previous post was at 06:41 PM ----------
Sorry, just a bit of additional info, have also come across posts saying the colours of the LCD look washed out with the wrong LCD.
Click to expand...
Click to collapse
ok tnx for the info... and i was thinking i can just order whatever. i checked the panel_type in the last_kmsg and i found that i have the replacement screen for which nobody knows who makes it. but it is a warm panel so it probably is sony... but i have to rip it apart to be certain
Sent from my One X using Tapatalk
and313 said:
ok tnx for the info... and i was thinking i can just order whatever. i checked the panel_type in the last_kmsg and i found that i have the replacement screen for which nobody knows who makes it. but it is a warm panel so it probably is sony... but i have to rip it apart to be certain
Sent from my One X using Tapatalk
Click to expand...
Click to collapse
That's the only downside - having to pull phone apart to check which one you have. Also another tip, phone need to be on to change LCD's, boot phone up with it apart, then wake up with power button on old screen, then sleep with power button, change screens then wake up again. There are plenty of vids on youtube to help, if new screen doesn't activate, check flex cable is in square and all the way - have had this problem before also.
okhughes said:
That's the only downside - having to pull phone apart to check which one you have. Also another tip, phone need to be on to change LCD's, boot phone up with it apart, then wake up with power button on old screen, then sleep with power button, change screens then wake up again. There are plenty of vids on youtube to help, if new screen doesn't activate, check flex cable is in square and all the way - have had this problem before also.
Click to expand...
Click to collapse
tnx... you answered all i was wondering about really appreciated
edit: ok so i riped it apart again and its a sony. for anyone who is wondering what might happen if the wrong screen is attached to the mobo watch this
https://www.youtube.com/watch?v=DHdtgu4rbxI
and the store said: why you dont just buy the "original" for 40€.... god i hate such people
Sent from my One X using Tapatalk
okhughes said:
That's the only downside - having to pull phone apart to check which one you have. Also another tip, phone need to be on to change LCD's, boot phone up with it apart, then wake up with power button on old screen, then sleep with power button, change screens then wake up again. There are plenty of vids on youtube to help, if new screen doesn't activate, check flex cable is in square and all the way - have had this problem before also.
Click to expand...
Click to collapse
I replaced my screen, but I powered down when removing the screen, and putting the replacement in. Now neither will light up. How do you solve this?
There are no guarantees with this, but try pulling the battery out for a minute or two. then with the original screen in, boot up and let it get to the lock screen wait for the screen to sleep then press power button to wake up then again to sleep. when the screen is sleeping try changing over the screens and then press power button to wake again. this is assuming that the screen displays on startup, but even if it doesn't try this process anyway. if it doesn't work, try doing with the new screen back to the old screen after pulling the battery. I have only ever come across this once, but it wasn't from powering down during a screen change, but pulling the battery seemed to fix it.
okhughes said:
There are no guarantees with this, but try pulling the battery out for a minute or two. then with the original screen in, boot up and let it get to the lock screen wait for the screen to sleep then press power button to wake up then again to sleep. when the screen is sleeping try changing over the screens and then press power button to wake again. this is assuming that the screen displays on startup, but even if it doesn't try this process anyway. if it doesn't work, try doing with the new screen back to the old screen after pulling the battery. I have only ever come across this once, but it wasn't from powering down during a screen change, but pulling the battery seemed to fix it.
Click to expand...
Click to collapse
I tried that, didn't work. I think I know the problem now. after searching on multiple forums, I think it's the 220 coil. A lot of people have had a similar issue, and they say they've solved it by replacing the coil. What I want to know is, how I managed to short the coil in the span of a few minutes, despite having used the same screen as the cracked one.
It is possible to do, although they can go for no reason, I recommend taking it somewhere to get coil replaced, it is a very fiddly job and you need to have a steady hand and the right tools (hot air gun) although my father managed to do one with a standard soldering iron, although it wasn't the best job. you risk damaging other components also if they blow off the mainboard (if you can find them), worst case scenario is the display ic has gone - that one will have to be done by a professional.
what a sh!t phone
we tried to repare it 2 years ago.
but failed.
so i just the pieces to gether wanted to see if i can fix it.
still not lcd just touchscreen (and now im not sure if i even have touchscreen lol maybe i broke that to now not sure
anyway sucks i have a brand new lcd touchscreen with frame we bought back then. and its even the right screen a green flex cable like the original one and still noting so i guess i broke the 220 chip thing how dont know. but not sure if i can replace it sucks it was a good phone
is there any help a easy fix? or do i really need to soldern that chip i cant sell the phone since there is personal data on it contacts and pictures (i guess dont remembrer)
It may still be replaceable, if it's been sitting for 2 headed is the phone taking a charge? It needs to be on to change the screen. If it is charging and booting up, and the screen still won't work when being changed try doing a hard reset by holding the power and volume down button until it restarts - have had advice by someone who repairs phones for a living that this should reset what the phone is looking at for hardware and you should be able to do screen replacement. Failing that chances are it's going to be dead. Not much point in selling it these days as they aren't worth much these days. If the phone won't start the battery may be dead flat. The phone needs some voltage to run its charging firmware, you can try to get it charging by leaving on charge for 10 min or more, even if no charge light, then hold power/vol up/vol down at the same time to recalibrate the charge circuit, it may start to charge after this.
Let me know how it goes, I wouldn't spend too much time on it, unless it's now a project..
okhughes said:
It may still be replaceable, if it's been sitting for 2 headed is the phone taking a charge? It needs to be on to change the screen. If it is charging and booting up, and the screen still won't work when being changed try doing a hard reset by holding the power and volume down button until it restarts - have had advice by someone who repairs phones for a living that this should reset what the phone is looking at for hardware and you should be able to do screen replacement. Failing that chances are it's going to be dead. Not much point in selling it these days as they aren't worth much these days. If the phone won't start the battery may be dead flat. The phone needs some voltage to run its charging firmware, you can try to get it charging by leaving on charge for 10 min or more, even if no charge light, then hold power/vol up/vol down at the same time to recalibrate the charge circuit, it may start to charge after this.
Let me know how it goes, I wouldn't spend too much time on it, unless it's now a project..
Click to expand...
Click to collapse
ow volum down? okay will try that. but i think i killed it lol cause the charging light wont come on anymore lol
it was just a idea that poped up in my head, that maybe i can save it so i friend can use it but i think i will just trow it away lol or something will give it a shot and see. will report back
nvm it's dead it wont even boot lol. i think i burned sometime lol that little cable that onder the battery thats conects the botem part with the other fliped out 2 time and 3time it smeled burned lol nvm
Sounds like it may have shorted, a replacement is fairly cheap , just depends on how serious you are about spending money on it.
I forgot to mention that when calibrating charge circuit with power/vol up/vol down all held down at the same time, they need to be held down for at least 2 minutes.
okhughes said:
Sounds like it may have shorted, a replacement is fairly cheap , just depends on how serious you are about spending money on it.
I forgot to mention that when calibrating charge circuit with power/vol up/vol down all held down at the same time, they need to be held down for at least 2 minutes.
Click to expand...
Click to collapse
nvm i think i fried the cpu or something lol it wont turn on anymore.
i trew it in the bin
Probably the best result, it's probably cheaper to to buy a second hand one and also cause less aggravation when you can't work out why it won't work. You could always sell the replacement screen.
okhughes said:
Probably the best result, it's probably cheaper to to buy a second hand one and also cause less aggravation when you can't work out why it won't work. You could always sell the replacement screen.
Click to expand...
Click to collapse
dont think i will sell it i mean who would buy it? lol but guess i could try for like 20euro or 10 lol.
and have 2 batteries for 10 or 5 euro lol
have 3 backcovers also 2 white and 1 black.
we bought every thing to repaire it but yeah.
could maybe sell some **** but pff dont knopw. (its my oncles old phone will ask him (maybe sell every thing exept de motherboard)
That's what I'd do, try and sell it for parts minus the mainboard. If that doesn't work, put it away somewhere and if you come across a dead one cheap, swap the mainboards out (providing it has the same screen - that's a given). Good luck with whatever you decide to do. :good:
Guys, I need help.
My One M8 finally gave in-or so i thought. After the volume rocker failing and falling off, and both cameras failing I started looking for a new phone.
Then the power button died.
So now, the phone semi-functions, at least it is usable for a backup for the time being. But, since i dont have any buttons, i cant get the phone to open.
Does the phone automatically boot itself when charge reaches 100%? If not, is there a way i can get this phone to open, I will get it repaired but i doubt it'll be done without the repairs formattiong the phone, which wont make sense...
Thanks!
barkinos98 said:
Does the phone automatically boot itself when charge reaches 100%?
Click to expand...
Click to collapse
No, why would it do that? Some folks like to charge it overnight, with the phone powered off; and not want it coming on for no reason in the middle of the night.
I don't think there is a way to power on, without the power button.
nice!
i just realized my sd cart got bent too-i think i have to say goodbye to all the stuff on that phone :I
the S7 seems like a nice phone
barkinos98 said:
Guys, I need help.
My One M8 finally gave in-or so i thought. After the volume rocker failing and falling off, and both cameras failing I started looking for a new phone.
Then the power button died.
So now, the phone semi-functions, at least it is usable for a backup for the time being. But, since i dont have any buttons, i cant get the phone to open.
Does the phone automatically boot itself when charge reaches 100%? If not, is there a way i can get this phone to open, I will get it repaired but i doubt it'll be done without the repairs formattiong the phone, which wont make sense...
Thanks!
Click to expand...
Click to collapse
That poor phone...
What did you do to it!?
I dont treat my phones well after a certain point, with that point being a single scratch or dent or something.
I was doing an experiment, and i spilled motor oil (castrol edge 5W-40 if anyones interested) and it stained my case, and from that day on I didnt use the phone with a case. i forgot the phone on the table during a flash summer rain-front camera destroyed, rear camera i have no clue how it went out lol
it was like new for a year and a half though... ;P
barkinos98 said:
I dont treat my phones well after a certain point, with that point being a single scratch or dent or something.
I was doing an experiment, and i spilled motor oil (castrol edge 5W-40 if anyones interested) and it stained my case, and from that day on I didnt use the phone with a case. i forgot the phone on the table during a flash summer rain-front camera destroyed, rear camera i have no clue how it went out lol
it was like new for a year and a half though... ;P
Click to expand...
Click to collapse
That's a bit ridiculous.
barkinos98 said:
I dont treat my phones well after a certain point
Click to expand...
Click to collapse
You should be regularly backing up your data then (many good solutions around). Really, everyone should. Wondering how to get data after the phone after its broken, is too late.
I never store anything important on internal storage. One day it will be inaccessible.
I feel sorry for your abused phone.
eh, its nothing too "important" just pictures that i received on whatsapp. rest were on my dropbox.
i got a silver S7, so i guess this thread can be closed.
I also looked into what I could do, turns out the power button is built in to the daughterboard. thankfully, i found and ordered one for $38, hope it'll at least work enough for me to get the data off it!