How to make O2 XDA II can be used to connect to a BT HEADSET with
handfree function??
any software can used to upgrade my O2 XDA II ot use with
BT handfree function...
NOW after i update the A2dp Patch...then i can listen mp3 music
however, i still cant use the BT headset to dail......
anyone can help me to solve this problem........thx~~
I recently purchased an AT&T Tilt (TYTN II phone) with Windows 6.1 Dutty Series... since my motorola KRZR took a dump on me....Quite an upgrade...I am trying to use the Motorola H700 Headset from my KRZR on to my HTC, I can get the headset located in the device menu but I cant get the HTC to pair up with the headset on a continual basis. I am also having an issue connecting to a Bluetooth GPS Antenna. I can locate it it just the same as the headset but it wont pair to the HTC nor ask an authorization code.
Is this a bluetooth glitch? Can I somehow reload the driver for the bluetooth? Perhaps I am doing something wrong but I never had a problem linking bluetooth devices before.....
On a separate note....I tried doing an activesync via bluetooth on my Dell Laptop and it again can be located on both ends but I can get any services to work on either side...
Help?
I have just received a new HTC TyTN II on Orange that has the same problem. My old one (windows mobile 6.0) had no problem with my Motorola H12, but the new one (Windows Mobile 6.1) can't keep the pairing, and I have to turn Bluetooth on an off to get the connection. Always have to enter the passcode.
Version data is:
CE OS 5.2.19212 (Build 19212.1.0.3)
Processor: MSM7200-400MHz
ROM version 1.65.16.25
G 25.83.40.02H
D 3.28.00.00
Any help /advice much appreciated!
O.
Pyper,
i don't know how it is on the H700, but on the BlueAnt Z9, you have to hold down the power switch until the LED on the headset blinks red very rapidly, when it does this, the headset is in pairing mode. then you can pair the phone with the headset. try something like this with the H700. if you can, find out how to get the H700 into pairing mode before you try to pair it up.
hope that helps!
Pyper70 said:
I recently purchased an AT&T Tilt (TYTN II phone) with Windows 6.1 Dutty Series... since my motorola KRZR took a dump on me....Quite an upgrade...I am trying to use the Motorola H700 Headset from my KRZR on to my HTC, I can get the headset located in the device menu but I cant get the HTC to pair up with the headset on a continual basis. I am also having an issue connecting to a Bluetooth GPS Antenna. I can locate it it just the same as the headset but it wont pair to the HTC nor ask an authorization code.
Is this a bluetooth glitch? Can I somehow reload the driver for the bluetooth? Perhaps I am doing something wrong but I never had a problem linking bluetooth devices before.....
On a separate note....I tried doing an activesync via bluetooth on my Dell Laptop and it again can be located on both ends but I can get any services to work on either side...
Help?
Click to expand...
Click to collapse
I've been having issues with my HTC TyTNII with the official 6.1 ROM and the Jabra BT500V headset. The pairing is automatic in WM6.1. The bluetooth causes the phone to be sluggish and causes call drops if the call's picked up within 3 rings or the call's picked up before it rings on the phone (Yes, Jabra rings first before the phone does). I've escalated this issue to HTC SEA Support and they've advised me to disable Bluetooth and test which I did for the past 3 months :|
I have 3 Jabra headsets (BT250, BT500, BT500V) and all are having the same issue with this ROM. I'm quite skeptical to buy another brand just for testing purposes. Do anyone else face the same issue? HTC SEA has fixes available specific for Jabra / Samsung headsets on Touch Cruise but strangely not on TyTN II
Finds BlueAnt S3 but won't pair
My BlueAnt ST3 pairs fast with a Motorola Razr V3xx but the HTC with WM6 Professional, finds the ST3, prompts for the password (0000) but always fails. On the Razr, I touched the enter key but on the HTC it only beeps. I tried the O.K. key too. The message I am getting after touching "Next" says invalid password or connection. Yes, Bluetooth is turned on and the ST3 as well.
Any ideas anyone?
Hello:
Some time ago I bought an unbranded HTC KAISER with WM6.1:
rom version: 3.29.422.1 WWE
rom date: 05/20/08
radio version: 1.65.20.29
protocal version: 25.88.40.04H
BT VERSION: 2.0/2.0+EDR
BT ADDRESS: 00:17:E8:2E:9F:A1
Anyway, I'm still having bluetooth issues with the unit. The BT works great with BlueAnt Z5i on streaming and music listening but I can't get it to work on phone calls, incoming or outgoing. No sound in the headset nor out of the Mic. Same problem with new Jawbone on calls and a Motorola HS860. Before I waste any more money I thought I'd ask about possile regedits etc. to correct this problem? Or perhaps I should consider new Roms?
Ben lurking here and reading and re-reading and getting more confused..anyone have suggestions or can point me to a probable solution?
Thanks for Listening
I finally got it to pair with BlueAnt ST3 and Motorola T305
BlueAnt ST3: I had to delete the ST3 connection, and get the ST3 in "pairing mode" then have the phone search for bluetooth devices. Doing this I got the password screen and entered the 0000. Driving around testing this, it was not as good as the Motorola Razr V3xx. Not always answering, dropped calls ect.
Motorola BT Speaker: I just received a Motorola T305 BT speaker, same process to get it paired. No voice activated call function yet. Just the two beeps, one indicating it is ready for a command and then it beeps again, and clicks out. The ST3 would talk to you and ask for confirmation.
What I have learned so far, the trick is to get the speaker phone in the pairing mode, so the Kaiser phone will prompt for password.
I am going to sell the Kaiser and buy the HTC touch HD and hope for better bluetooth functionality and reliability.
Hmmm... Actually I have no problem pairing any of the BT items I mentioned, just the handsfree doesn't work in all. Thanks for the reply...
anybody with personal exp with both headsets?
Samsung SBH500 BT Wireless Headphone
i have a windows mobile jasjar which i have update it from WS 5.0 to WM 6.0 an di have purchased a Samsung SBH500 BT Wireless Headphone now though i am able to pair the headset with my device, when i play the music, it skits, means it will cut in and out and i am unable to hear the complete music with my headphones. i have also tried pairing this device with diffrent phones ( nokia, samsung)as well but no sucess.
any help on this will be apreciated.
thank you.
Hello
I have got a problem with this BT headset.
http://www.dealextreme.com/details.dx/sku.8422
On symbian works fine, but on wm i cannot make persistent pairing with HTC TOUCH PRO device.
Respective, after turn of device i have to connect BT headset again manual.
That's very boring
Does anybody same problem with windows mobile?
Thanks for any reply
blacksymmetry said:
Hello
I have got a problem with this BT headset.
http://www.dealextreme.com/details.dx/sku.8422
On symbian works fine, but on wm i cannot make persistent pairing with HTC TOUCH PRO device.
Respective, after turn of device i have to connect BT headset again manual.
That's very boring
Does anybody same problem with windows mobile?
Thanks for any reply
Click to expand...
Click to collapse
Same here.... i have Samsung WEP200, it worked with symbian OS, but it does not work with my HTC Touch Pro.. it always said "pair failed because incorrect pin"
have you figure this thing out??
Hello
I have the Desire Z and bluetooth headset Plantronics Voyager 520
Desire unfortunately Android did not see this headset (i tried many roms) - if anyone knows how to make Desire (android) work with this voyager 520?
This bluetooth headset work with the HTC TyTN II correctly.
I can still pair it with him.
greetings
Sorry for my bad English....
Are you turning blutooth on your desire first and then turning on your plantronics after blutooth on phone is fully up? Might help, I know I have to do that when connecting to my motorola T505 hands free adapter
Sent from my HTC Vision using XDA Premium App
yes.. i turn on bluetooth device in android (desire) first.. waiting when devices start and after that i turn on headset. (My bluetooth is in scan mode and visible, but I've done a lot of combinations of scanning and wisible mode) in that moment (theoretically) headset send packages via bluetooth to phone (pairing packages)... but unfortunately my desire dont see this headset...
I read on a website, that desire is another version of bluetooth
than in the headset.
but I can not find the patch for (bluetooth) desire Z.