Nokia BH-503 vs. Samsung SBH500 - General Accessories

anybody with personal exp with both headsets?

Samsung SBH500 BT Wireless Headphone
i have a windows mobile jasjar which i have update it from WS 5.0 to WM 6.0 an di have purchased a Samsung SBH500 BT Wireless Headphone now though i am able to pair the headset with my device, when i play the music, it skits, means it will cut in and out and i am unable to hear the complete music with my headphones. i have also tried pairing this device with diffrent phones ( nokia, samsung)as well but no sucess.
any help on this will be apreciated.
thank you.

Related

New BT apps allowing streaming HighQ MP3 towards BT headsets

I own a Bluetooth Motorola headset HS810.
I also own:
- a MDA compact
- a MDA III and
- a XDA II
I see that recently someone was able to USE BLUETOOTH NOT ONLY for receiving phone calls, but also for listening to MP3 and other sounds or musics (via Windows Media Player).
My GOAL IS TO USE my BT headset and HAVE THE SAME QUALITY THAT I CURRENTLY HAVE USING STANDARD HEADPHONES.
Now what about quality? I heard about ADSP, a new bluetooth stack which allow much higher sound quality, quasi-stereo quality.
My questions are:
1. can somebody please summarize what is the current development status? Can somebody clarify this subject to unprofessional and amateur users like me who are eager to use BT headsets and listen to MP3 (not only pick up phone calls)?
2. If this new BT stack (widcomm or toshiba or microsoft ?) is already available, then in which units can be implemented? MDA compact? XDA II? MDA III?
3. Supposing this new BT stack already exists and it enables Windows Media (or similar applications) to stream sound for BT heeadsets, THEN can I get “quasi Hi-Fi” sound quality with my current Bluetooth Motorola headset HS810 or shall I need a replacement, a better BT headset a new generation one?
Thanks for your kind suggestions
Saulo866
Wrong post

Bluetooth wireless stereo?

Hi!
I have bought a new wireless headset (JABRA BT320s) and it works nice.
but with windows 2003 I can't use it as a stereo headset. I can just recieve calls and i can't listen musics and...
I tried it with WM5 (HELMI AKU 3.5-1.4) the first problem solved and I could listen music but the sound was not so good and it was cutting off.
is there a solution for this problems so I could listen music and recieve call with WM2003?
Bluetooth wireless stereo
try using bluesoleil software fir windows ce to hear your music on blue tooth stereo head phone
their site address is "www.bluesoleil.com"
download the file but cant seem to install to my pda need help
check out this link:
http://www.pdagold.com/forums/view_topic.asp?t=5012
yes but am bought jabra bt 620s need comment
ok after so much forum searching how do i install a2dp to my pda my version is wm2003se i think???

Motorola S9 and Asus P525

Hello there!
I've bought a Motorola S9 headset to my Asus P525. It works fine but my only problem is that the Headset profile doesn't works
I connected it, and I choose High Quality Audio profile. It connects, but when I get a phone call, the phone rings on the PDA but not on the S9.
When I choose the Discover option in the BT manager, it offers only the HQ Audio profile.
I've tested it with a HTC Wizard, and with Nokia phones too and it worked fine so the problem maybe is not with the S9. So I think the problem is the Broadcomm/Widcomm BT stack because Wizard has MS stack. Is there any way to activate the original MS BT stack? Or is there some other BT stack?
Thanks for the help
Cheers

Bluetooth issues with the HTC TYTN II

I recently purchased an AT&T Tilt (TYTN II phone) with Windows 6.1 Dutty Series... since my motorola KRZR took a dump on me....Quite an upgrade...I am trying to use the Motorola H700 Headset from my KRZR on to my HTC, I can get the headset located in the device menu but I cant get the HTC to pair up with the headset on a continual basis. I am also having an issue connecting to a Bluetooth GPS Antenna. I can locate it it just the same as the headset but it wont pair to the HTC nor ask an authorization code.
Is this a bluetooth glitch? Can I somehow reload the driver for the bluetooth? Perhaps I am doing something wrong but I never had a problem linking bluetooth devices before.....
On a separate note....I tried doing an activesync via bluetooth on my Dell Laptop and it again can be located on both ends but I can get any services to work on either side...
Help?
I have just received a new HTC TyTN II on Orange that has the same problem. My old one (windows mobile 6.0) had no problem with my Motorola H12, but the new one (Windows Mobile 6.1) can't keep the pairing, and I have to turn Bluetooth on an off to get the connection. Always have to enter the passcode.
Version data is:
CE OS 5.2.19212 (Build 19212.1.0.3)
Processor: MSM7200-400MHz
ROM version 1.65.16.25
G 25.83.40.02H
D 3.28.00.00
Any help /advice much appreciated!
O.
Pyper,
i don't know how it is on the H700, but on the BlueAnt Z9, you have to hold down the power switch until the LED on the headset blinks red very rapidly, when it does this, the headset is in pairing mode. then you can pair the phone with the headset. try something like this with the H700. if you can, find out how to get the H700 into pairing mode before you try to pair it up.
hope that helps!
Pyper70 said:
I recently purchased an AT&T Tilt (TYTN II phone) with Windows 6.1 Dutty Series... since my motorola KRZR took a dump on me....Quite an upgrade...I am trying to use the Motorola H700 Headset from my KRZR on to my HTC, I can get the headset located in the device menu but I cant get the HTC to pair up with the headset on a continual basis. I am also having an issue connecting to a Bluetooth GPS Antenna. I can locate it it just the same as the headset but it wont pair to the HTC nor ask an authorization code.
Is this a bluetooth glitch? Can I somehow reload the driver for the bluetooth? Perhaps I am doing something wrong but I never had a problem linking bluetooth devices before.....
On a separate note....I tried doing an activesync via bluetooth on my Dell Laptop and it again can be located on both ends but I can get any services to work on either side...
Help?
Click to expand...
Click to collapse
I've been having issues with my HTC TyTNII with the official 6.1 ROM and the Jabra BT500V headset. The pairing is automatic in WM6.1. The bluetooth causes the phone to be sluggish and causes call drops if the call's picked up within 3 rings or the call's picked up before it rings on the phone (Yes, Jabra rings first before the phone does). I've escalated this issue to HTC SEA Support and they've advised me to disable Bluetooth and test which I did for the past 3 months :|
I have 3 Jabra headsets (BT250, BT500, BT500V) and all are having the same issue with this ROM. I'm quite skeptical to buy another brand just for testing purposes. Do anyone else face the same issue? HTC SEA has fixes available specific for Jabra / Samsung headsets on Touch Cruise but strangely not on TyTN II
Finds BlueAnt S3 but won't pair
My BlueAnt ST3 pairs fast with a Motorola Razr V3xx but the HTC with WM6 Professional, finds the ST3, prompts for the password (0000) but always fails. On the Razr, I touched the enter key but on the HTC it only beeps. I tried the O.K. key too. The message I am getting after touching "Next" says invalid password or connection. Yes, Bluetooth is turned on and the ST3 as well.
Any ideas anyone?
Hello:
Some time ago I bought an unbranded HTC KAISER with WM6.1:
rom version: 3.29.422.1 WWE
rom date: 05/20/08
radio version: 1.65.20.29
protocal version: 25.88.40.04H
BT VERSION: 2.0/2.0+EDR
BT ADDRESS: 00:17:E8:2E:9F:A1
Anyway, I'm still having bluetooth issues with the unit. The BT works great with BlueAnt Z5i on streaming and music listening but I can't get it to work on phone calls, incoming or outgoing. No sound in the headset nor out of the Mic. Same problem with new Jawbone on calls and a Motorola HS860. Before I waste any more money I thought I'd ask about possile regedits etc. to correct this problem? Or perhaps I should consider new Roms?
Ben lurking here and reading and re-reading and getting more confused..anyone have suggestions or can point me to a probable solution?
Thanks for Listening
I finally got it to pair with BlueAnt ST3 and Motorola T305
BlueAnt ST3: I had to delete the ST3 connection, and get the ST3 in "pairing mode" then have the phone search for bluetooth devices. Doing this I got the password screen and entered the 0000. Driving around testing this, it was not as good as the Motorola Razr V3xx. Not always answering, dropped calls ect.
Motorola BT Speaker: I just received a Motorola T305 BT speaker, same process to get it paired. No voice activated call function yet. Just the two beeps, one indicating it is ready for a command and then it beeps again, and clicks out. The ST3 would talk to you and ask for confirmation.
What I have learned so far, the trick is to get the speaker phone in the pairing mode, so the Kaiser phone will prompt for password.
I am going to sell the Kaiser and buy the HTC touch HD and hope for better bluetooth functionality and reliability.
Hmmm... Actually I have no problem pairing any of the BT items I mentioned, just the handsfree doesn't work in all. Thanks for the reply...

Bluetooth headset pairing problem

I don't know if this is the correct board, but here it goes..
I just bought Nokia BH-111 (http://nokia.ly/ACiqj6) bluetooth stereo headset and I can't pair it with my Omnia 7. Works fine with Nokia 5230 phone, so it's not a problem with the headset. The phone does not even detect the headset, it keeps showing "searching" and nothing happens.
This is what nokia product page says about compatibility:
"All phones, music players and other devices that support Bluetooth v. 2.1 + EDR, Handsfree Profile 1.5 and Headset Profile 1.0"
This microsoft support article ( http://support.microsoft.com/kb/2449475 ) has this to say abozt supported profiles:
Advanced Audio Distribution Profile (A2DP 1.2)
Audio/Video Remote Control Profile (AVRCP 1.3)
Hands Free Profile (HFP 1.5)
Headset Profile (HSP 1.1)
Phone Book Access Profile (PBAP 1.1)
+ v2.1 with EDR
So as you can see, WP supports EVERY one of those profiles and standards. What's the problem than?
Does your Omnia find other devices?
Omnias are notoriously bad for having faulty Bluetooth. My first one stopped working properly. Replacement is fine.
In the Omnia 7 section there are quite a few people who've reported it.
Thanks for the reply.
It seems that the issue is with WIFI and Bluetooth working together. After i turned wifi off, Omnia was able to find the headset. The playback is a little patchy, and rewind/fast forward does not work. Is this a reason enough to ask for a replacement? Does the warranty cover it?
EDIT: sorry i posted here, i thought it was WP software related, plus Omnia boards are almost empty.

Categories

Resources