[Q] Syndicate Frozen 1.1.1 unable to connect USB Storage - Epic 4G Q&A, Help & Troubleshooting

I saw in the notes that this might be a problem, and to reboot. Tried rebooting phone, power off phone, reboot pc, power off pc. When I click Connect USB Storage nothing happens. Any thoughts? Thanks

Try to re-flash the ROM. I just did the 1.1.1 update from 1.1.0 and i tested my usb mass storage works.

Or go to settings, applications, development, and check usb debugging
Sent from my SPH-D700 using XDA App

vapur said:
I saw in the notes that this might be a problem, and to reboot. Tried rebooting phone, power off phone, reboot pc, power off pc. When I click Connect USB Storage nothing happens. Any thoughts? Thanks
Click to expand...
Click to collapse
This is a known problem when usb debugging is not checked. If you check usb debugging you can then successfully mount the sd card for usb transferring.
To do that go to settings > applications > development
Then check the box next to "USB debugging"

Qb is right very odd I always had to turn off debug to get into the sdcard
Sent from my SPH-D700 using XDA App

Airplane mode enabled/disabled
after installing this ROM correctly I might add, no service is available due to airplane mode disabling and re-enabling itself over and over again. I'v re flashed, reinstalled, re downloaded, and used oden to recover back to factory multiple times and this problem keeps coming back. I'm using the original stock factory ROM atm, and would really like to fix this problem since i'v been a dedicated Syndicate fan for over a year now (new member to xda due to this problem)

I have this issue after ~5 flashes of v1.1.1. Ranging from data wiping all the way to odin to EC05 and back, but still have the issue. I've given up trying to fix it and just enabled debugging.
You can try enabling usb debugging, or try bluetooth file transfer or the app Samba filesharing.

Related

flashed ICS rom now phone cant be recognized by computer

ok basically phone wont go into mass storage mode when connected to computer and it isnt recognized by odin or the the computer at all and let me get all these out of the way before im asked
ok first yes driver are installed properly i even installed kies twice and just the drivers from the samsung website to make sure i wasnt messing up somewhere
and then...
i also tried doing a nandroid of blazer rom and getting back to the gingerbread just so my phone would be recognized that also did not work
and then..
i just now bought the mobile odin app and tried flashing the stock eko2 kernel this did not work either
and then...
ive used the original USB cord and the one i bought to day as well as several different computers just to see if the pop up as recognized with show but nothing happens my phone seems like its no longer capable of going into mass storage mode
and then...
moved this here hoping someone has has this issue hopefully you guys can help ill be up all night so feel free to resond whenever thanks guys
make sure your phone is disconnected from the computer and then try going into the settings and in the top section that is wireless and networks press more, then USB utilities, and press connect storage to PC and then plug your phone into the computer. had about the same problem and came across that.
You can also try going into your device settings on your pc (samsung/modem) and resetting the driver it seems to get "stuck" sometimes.
RigorousNinja said:
make sure your phone is disconnected from the computer and then try going into the settings and in the top section that is wireless and networks press more, then USB utilities, and press connect storage to PC and then plug your phone into the computer. had about the same problem and came across that.
Click to expand...
Click to collapse
yea this same method works for me too when the pc doesnt recognize it
I tried the USB utilities but it only popped up with MTP initialization and then MTP connected but when I click connect it tells me remove USB chord
Sent from my SPH-D710 using XDA App
ross4747 said:
I tried the USB utilities but it only popped up with MTP initialization and then MTP connected but when I click connect it tells me remove USB chord
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
mine told me to remove it too. so i had to click connect *before* plugging in the usb cable
ejbmvp said:
mine told me to remove it too. so i had to click connect *before* plugging in the usb cable
Click to expand...
Click to collapse
yea thats what i did and thats when i got the MTP initialization and connected messages but no response from my PC
RigorousNinja said:
make sure your phone is disconnected from the computer and then try going into the settings and in the top section that is wireless and networks press more, then USB utilities, and press connect storage to PC and then plug your phone into the computer. had about the same problem and came across that.
Click to expand...
Click to collapse
+1 to this... its the new way to connect
I put this on my sd card (by taking the card out of the phone) and putting it in a card reader. I flashed the file from the stock recovery and this gave me custom recovery. Then I restored my previous backup. I was having the same issue and FB21 has too many bugs. I went back to gingerbread but kept fb21 modem.
You can actually get MTP working quite simply...
ssconceptz said:
To use USB MTP you have to unmount SD Card first then plug in.
Click to expand...
Click to collapse
Credit goes to ssconceptz for the workaround
neatchee said:
You can actually get MTP working quite simply...
Did this and that got my computer to acknowledge I had connected my phone but not it says unrecognized, so I'm going to uninstall kies and then reinstall again and see if that helps
Credit goes to ssconceptz for the workaround
Click to expand...
Click to collapse
Sent from my SPH-D710 using XDA App
OK that also didn't work I have mobile Odin on my.phone is it possible to use it to go back to stock?
Sent from my SPH-D710 using XDA App
OK I've gotten my PC to know when my phone is connected but no matter how many times install the drivers or uninstall and install kies or use the MTP method you guys talked about it still comes up unrecognized device I tried going into device manager and updating them myself unfortunately that didn't help it kept giving me the code. 10 device is unable to start any ideas?
Sent from my SPH-D710 using XDA App

The way connecting USB storages to PC on Stock FC22

The issue in here is resolved. So, if you wonder how to connect phone's USB storages into PC, please check the update 3 section in below.
If you are a user of USB utilities, stay away from FC22.
I'm not sure if this is an intended directional change from Samsung or if this function is missed by mistakes, but on FC22, I do not see the Settings > More... > USB utilities. I saw it until FC18 and it's not in FC22.
So, if you use your internal or external sdcard thru this tool, this would be a reason why you stay away from this rom until it's fixed -> Not valid any more
Now I moved back to FC18 from FC22 because I'm a kind of heavy user of this tool because it's really faster than any other method whenever I transfer the data between sdcards and my pc.
Maybe my eyes are wrong but I tried to find this function from everywhere in the settings but couldn't find. If someone find this function, please direct me to the right place.
Tweaked Calk's FC18 Rom is working fine (almost no defects) except the way entering the ##debug# mode. I'm still don't know how I can get the 'lock code' on ICS version (not MSL code).
(attached screenshots: first - from fc22, second - from fc18)
Now I'm sitting back and waiting for next build....
[Update1]
I've applied Fc22 Kernel and modem upon Calk's Tweaked FC18. - USB Utilities is still there.
Next update would be - factory reset and clean install FC22. Will follow up shortly
[Update 2]
Because I factory-reset my phone, it's taking longer than before to update. I'll post the screen shot in few minutes but Samsung replaced the USB utilities to Kies via Wi-Fi.
I've seen that Samsung in Korea, they are upgrading customer's phone thru visiting customer center or via 'Kies via Wi-Fi'. Are they following the same steps in here?
Because I installed Stock FC22, I ran Calk's Bare Rom Converter and it includes the scripts removing Kies APKs. I think that's the reason why it's not showing Kies via Wi-Fi (default in Stock FC22 instead of USB Utilities).
[Update 3]
Thanks to Dchibro, mdsevol and kali323
I don't need to test it any more. On FC22, the way phone communicate with PC has been changed a little. Usb utilities on the settings is removed and replaced with Kies via Wi-Fi.
So, to make the PC recognize the phone's usb storages, go to Settings > {} Developer options > turn off USB debugging > connect your USB cable
Another way connecting USB storages to PC (big thanks to elliwigy)
I pull status bar down and click the USB notification then turn USB mode on and it connects to PC for file transfer..
Once USB cable is connected, PC will recognize your internal and external sdcard.
I think this way is better than before and it would be one of the reason why I'm moving forward.
I'm on codename and flashed the fc22 kernel and modem.. no issues but I always plug it into PC to transfer stuff.. it loads right up..
Sent from my SPH-D710 using XDA
elliwigy said:
I'm on codename and flashed the fc22 kernel and modem.. no issues but I always plug it into PC to transfer stuff.. it loads right up..
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Ok. Let me try to load fc22 kernel and modem on my current fc18 rom and check if it's still there. If it's there, then it's not the kernel or modem issue. I need to factory reset and reinstall the fc22 rom (I've already did that) and check again.
Anyone else?
All is well here
Sent from my SPH-D710 using XDA
kobridge said:
Ok. Let me try to load fc22 kernel and modem on my current fc18 rom and check if it's still there. If it's there, then it's not the kernel or modem issue. I need to factory reset and reinstall the fc22 rom (I've already did that) and check again.
Anyone else?
Click to expand...
Click to collapse
Le me clarify.. I am on code name rom.. not the stock fc22.. I have the kernel from code name.. USB settings aren't in the same spot lol
Sent from my SPH-D710 using XDA
elliwigy said:
Le me clarify.. I am on code name rom.. not the stock fc22.. I have the kernel from code name.. USB settings aren't in the same spot lol
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
I'm updating my interim results at first post.
Does enabling USB debugging turn off MTP and make USB mass the default like it does on the GB ROM? I'm guessing no but I thought I'd ask.
Sent from my SPH-D710 using Tapatalk
The option isnt there on mine either, I am running stock FC22 with modem and kernal although when I connect my phone via usb it still gives me the option to connect mass usb storage. Is that what you are talking about?
Dchibro said:
Does enabling USB debugging turn off MTP and make USB mass the default like it does on the GB ROM? I'm guessing no but I thought I'd ask.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
it does on FC22
kali323 said:
it does on FC22
Click to expand...
Click to collapse
I'm not sure I see what the problem is then, other than Samsung already handling MTP vs Mass USB horribly on their ROM.
Sent from my SPH-D710 using Tapatalk
Problem solved. It's working like a charm and better than using USB Utilities.
I'll update my thread with this information.
Thank you guys!
Dchibro said:
Does enabling USB debugging turn off MTP and make USB mass the default like it does on the GB ROM? I'm guessing no but I thought I'd ask.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
On codename I just plug it in and it has USB debugging and mass storage mode like on gb.. I pull status bar down and click the USB notification then turn USB mode on and it connects to PC for file transfer.. there is another option too..
Sent from my SPH-D710 using XDA
kobridge said:
Problem solved. It's working like a charm and better than using USB Utilities.
I'll update my thread with this information.
Thank you guys!
Click to expand...
Click to collapse
get codename.. problem solved lol.. has way more options than stock.. me I just plug it in! Didn't even need to install any d rivers and it just worked
Sent from my SPH-D710 using XDA
kobridge said:
[Update 3]
Thanks to Dchibro, mdsevol and kali323
I don't need to test it any more. On FC22, the way phone communicate with PC has been changed a little. Usb utilities on the settings is removed and replaced with Kies via Wi-Fi.
So, to make the PC recognize the phone's usb storages, go to Settings > {} Developer options > turn off USB debugging > connect your USB cable
Another way connecting USB storages to PC (big thanks to elliwigy)
I pull status bar down and click the USB notification then turn USB mode on and it connects to PC for file transfer..
Once USB cable is connected, PC will recognize your internal and external sdcard.
I think this way is better than before and it would be one of the reason why I'm moving forward.
Click to expand...
Click to collapse
Actually, by default, the way USB storage works in FC22 hasn't changed, it still defaults to MTP mode and is as annoying as ever, plus they removed the USB Utilities option in menu->settings->more so you can't manually enable it anymore.
The reason you got the impression it changed is because Calk modified a property in /default.prop (in the kernel he bundles with FC22) which controls how the USB storage is configured, so if you used his modified kernel to install FC22, the USB mode will be changed from MTP mode to Mass Storage mode. Once you have USB Mass Storage mode configured, it will be stored persistently in your Android User Data, so should you change kernels in the future, to one which doesn't have the change Calk made, USB Mass Storage mode will remain. The only ways it would get reset if if you wiped your Android User Data AND switched to a kernel which didn't have USB Mass Storage mode enabled in /default.prop
I have added a solution to the ICS USB Mass Storage annoyance to the Auto Root package. This will allow you to manually choose USB Mass Storage Mode (ie GB USB Storage behavior) for theoretically any ICS release, though I only tested it for FC22. Use Option E (Extra Options) followed by "Enable ICS USB Mass Storage Mode". This option will be stored persistently in your Android User Data, so it only needs to be done once (or whenever you reset your Android User Data)
Full writeup is here (and also in the FAQ of the Auto Root sticky)
What happened to USB Storage in ICS, how do I get the old GB behavior back?
Dchibro said:
I'm not sure I see what the problem is then, other than Samsung already handling MTP vs Mass USB horribly on their ROM.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
The problem is that we are seeing lots of build every daily basis but there's no additional information about the new build. Only the way we would know the changes is through our own test. In here, we are being used as kind of testers even we are donating our own time for free. If someone who provide the source to our forum, if they have any kind of basic ettiquette, please provide the basic information regarding the change also. That will save lots of our time and prevent us from misleading and posting wrong information. But that would be one of their intention though.
Personally I want to add my thanks to sfhub for his kind explanation about what's going on and what's happening.
Sent from my SPH-D710 using xda premium

[Q] USB not recognised

Hi all,
I've read a lot of forums on what seems to be a pretty common issue, however, with each attempt at a fix the answer is still elusive.
the problem i'm experiencing is that when I connect my (unrooted) Galaxy S2 to my pc (running windows 7) the USB device is not recognised. The phone says that it is connected (USB Connect MTP-Connected), however, when I try to access my phone via Kies or explorer it is not there. I also get an error message saying that the 'device is not recognised'.
I've taken the following actions:
- Reinstalled a fresh version of Kies
- Reinstalled samsung drivers (once prompted by Kies)
- Tried at least 3 USB cables including the original Samsung cable
- As per one of the blogs i read, i switched to USB debugging on and then off as there was no effect
- I've tried turning on bluetooth, then connecting the USB device (also a 'fix' i've seen on another forum)
- I've restarted my phone a number of times
- Connected via different USB ports
- Restarted my PC
Could anyone please help me.
Thanks,
Rob
Get a new one
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Uninstall all drivers, and Kies.
Restart the computer.
No go to device Manager under Human Interface Device/Universal Serial Bus controllers and see if there is that little yellow triangle there. If so click and uninstall any device with the aforementioned icon.
Now reset again.
Go to the Samsung website and download the drivers for the phone. Restart the computer yet again. Almost done.
Now attach your phone and it should be identified.
Go ahead and install Samsung Kies and you should be ok. I hope all this works.
I had a very similar issue with my last SII. One day it just simply would not be recognized by many computers using various USB cords including the OEM one. Windows always said something along the lines of " USB device not recognized, a device connected to this computer has malfunctioned." The computer would pick it up bit was listed as an unknown device in the device manager. Turns out it was a hardware failure so I had so get a warranty replacement
Sent from my Galaxy Nexus using Tapatalk 2
r0b0_0 said:
Hi all,
I've read a lot of forums on what seems to be a pretty common issue, however, with each attempt at a fix the answer is still elusive.
the problem i'm experiencing is that when I connect my (unrooted) Galaxy S2 to my pc (running windows 7) the USB device is not recognised. The phone says that it is connected (USB Connect MTP-Connected), however, when I try to access my phone via Kies or explorer it is not there. I also get an error message saying that the 'device is not recognised'.
I've taken the following actions:
- Reinstalled a fresh version of Kies
- Reinstalled samsung drivers (once prompted by Kies)
- Tried at least 3 USB cables including the original Samsung cable
- As per one of the blogs i read, i switched to USB debugging on and then off as there was no effect
- I've tried turning on bluetooth, then connecting the USB device (also a 'fix' i've seen on another forum)
- I've restarted my phone a number of times
- Connected via different USB ports
- Restarted my PC
Could anyone please help me.
Thanks,
Rob
Click to expand...
Click to collapse
That happened to me one day....
All I did was reboot my phone and tried a new cable and it worked
Sent from my SGH-T989 using xda premium
Not very helpful answers... you may have sorted this out already but...
One solution found on other threads that worked for me was this:
uninstall Kies
key in the dialer *#7284#
it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
Only change the USB setting.
Select PDA, if it already selected, select MODEM, don't hit "back", try reconnect, wait for windows to respond.
Unplug, then select PDA, try reconnect.
usb device not recognised
pardus said:
Not very helpful answers... you may have sorted this out already but...
One solution found on other threads that worked for me was this:
uninstall Kies
key in the dialer *#7284#
it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
Only change the USB setting.
Select PDA, if it already selected, select MODEM, don't hit "back", try reconnect, wait for windows to respond.
Unplug, then select PDA, try reconnect.
Click to expand...
Click to collapse
Dear all, I have same problem. I have official ICS 4.0.3 on mz Smasung S2 adn when I connect phone on mz computer i receiving information "USB Device not recognised" I tried all mentioned stuff:
reinstaling driver
cleaning micro stick on phone
hard reset
*#7284#
wipe clear data and cache
but i dont have connection Please help if someone have solution for this. Thanks in advance
srdjan_trisic said:
Dear all, I have same problem. I have official ICS 4.0.3 on mz Smasung S2 adn when I connect phone on mz computer i receiving information "USB Device not recognised" I tried all mentioned stuff:
reinstaling driver
cleaning micro stick on phone
hard reset
*#7284#
wipe clear data and cache
but i dont have connection Please help if someone have solution for this. Thanks in advance
Click to expand...
Click to collapse
Try changing your usb cable. If that still doesnt help, try it on another pc. If still not, then send it to samsung for repair.
Sent from my SGH-T989 using xda app-developers app
PC not recognizing Android USB connectio
romny19 said:
That happened to me one day....
All I did was reboot my phone and tried a new cable and it worked
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Romny 19, you are dead on. I had thesame problem, read your posting and good to go.
Anyone trying this must remember to power down phone completely (Reboot),

[Q] Connecting EVo 4g to the computer

Im trying to root my Evo 4g but it wont connect to the computer. When i plug it in it starts charging but i cant find it on 'my computer'. I made sure it was set to disc drive. i have tried different cords and ever different phones with the same cord. the other phone will connect just fine.. i have tried downloading several different drivers but none work. i tried doing a factory reset thinking it was a software problem on the phone. my last theory is that the port on the phone is bad. but the phone still charges so im not 100% sure about that. any ideas on what else i can do to fix this problem?
Go into Menu - Settings - Applications - Development. Make sure USB debugging is checked.
prboy1969 said:
Go into Menu - Settings - Applications - Development. Make sure USB debugging is checked.
Click to expand...
Click to collapse
Also, install HTC Sync, it's on your SD Card by default, and then uninstall it, so the drivers for the Evo are on your computer
Has your phone been rooted and flashed to another rom?
Sometimes the usb port for your phone is broken. Mine is so I have to put the sd card directly into the computer using a adapter
Sent from my PC36100 using xda app-developers app
Have you made sure your phone is not waiting for a verification that you want to turn USB storage on? I turn it on and then forget to hit "OK" on the popup verification at least once a day.

Cant restore phone. MobileGO thinks USB debugging is disabled.

I created a thread on Mobile GO's forums but I probably have a better chance of getting help here.
I need to restore my phone with a backup I took with Wondershare MobileGO application on PC. However I keep getting prompted with the screen telling me to turn on USB debugging. I tried restarting my phone & PC, different USB splots, and toggling USB debugging on and off.
Any ideas?
USB debugging MobileGo fix
gunnerrrrr said:
I created a thread on Mobile GO's forums but I probably have a better chance of getting help here.
I need to restore my phone with a backup I took with Wondershare MobileGO application on PC. However I keep getting prompted with the screen telling me to turn on USB debugging. I tried restarting my phone & PC, different USB splots, and toggling USB debugging on and off.
Any ideas?
Click to expand...
Click to collapse
I had this same problem: couldn't restore because MobileGo kept insisting USB debugging wasn't turned on. However, I found a fix. Instead of using the "Data Recovery" button on the home screen, I went to the "Super Toolkit" tab and selected the "Restore" button under "Essentials" and it worked like a charm!

Categories

Resources