my ba was working great with D-TWO MULTI RC5 and one day it just went crazy !
When i press Power Button it soft resets ?
Related
how do u hard reset WM 2005 on xda II?? i tried search...cudnt find nething
hard reset WM2005
you have to make sure to follow the sequence correctly and keep all of them pressed fo 5-10 secs
Believe me this works!!
Press power putton
Then press Record Button
Then Press Camera Button
Then with Stylus press Reset Button
Use the recorder button and the camera butoon to scroll and change values.
After this you will see 3 options.
1 Kit = YES ------------------ change this to NO
2 Register Hive= No --------------- should remain NO
3 Storage = No --------------------- change this to YES
after this press the big round button b/w the call and call end buttons
the device reboots.
*this is taken from another post somewhere
My Qtek 2020 only hard reset if I press Power/ Recorder/ Notes/ Reset Button IN THE SAME TIME for only 1 sec.
Hi all !
I have a problem with h2200
If I press the power button that occurs nothing.
but if I press reset button , one time blink screen and turn on 2 leds blue and yellow. After hard reset (press 3 button) leds off.
And if i press reset problem repeat again .
Can be it is required reload memory through JTAG?
pls. help !!
hi
my xda orbit keeps rebooting and i cant hard reset it. any ideas guys.
kevin
What happens when you take away the battery and plug it again.
Then You try to boot, it works ?
Then if not you try to hard reset, It works ?
Just to know...
startup bug
hi
when i take the battery out and put it back in the same thing happens i have tried to press in the two buttons and pressing the stylus in the hole but it wont hard reset.
kevin
Did you tried bootloader mode and then flash again the rom ?
how do i do that. i took the memory card out and it rebooted.
kevin
Taken from : http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
To do a hard reset.
Press both soft keys and insert stylus into soft reset button and press.
Release the soft reset button and keep pressing the soft keys.
When the "This operation will delete all your personal data, to manufacturer default" appears on screen.
Press Green call button to restore manufacturer default, or press other keys to cancel.
The bootloader is invoked by pressing down the Power and Voicedialer buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears.
startup bug
hi
thanks for your sugestions i took the memory card out and deleted some stuff from it and it works now. this seems to be a problem with the orbit as i have seen a few people mention it on various posts.
kevin
How to hard reset I-Mate JAMA? It's stuck on second boot screen.
oqaab said:
How to hard reset I-Mate JAMA? It's stuck on second boot screen.
Click to expand...
Click to collapse
There are 3 way:
1) Start->Settings->System tab->Master Clerar->1234->ok
2)Press soft-reset for 15sec.
3)Remove the battery, Simultaneously hold volume(-) button and red hangup button, while still holding those keys, insert the battery and wait for the led to go out, release keys and device will hard reset.
here is the video just take a look
http://mygsmtube.com/videos/198-imate-jama-hard-reset-howto.html
stuck on startup i- mate jama 100% solve with hard reset,
remove battery, and hold press volume down(-) and power on button siment...
and insert battery, when led goes on, realese button fast. wait few mins. 100% solve..
hi guys,
I recently did something slightly different on my T700 that I've owned for almost 3 yrs now.... I enabled the finger print reader. After that, I noticed some odd behavior over the next few days, but nothing too out of the ordinary.
Anyway a few days later, the touchscreen stopped working. I have a feeling that enabling the fingerprint reader, had something to do with this. The home button works, so does the power and vol +/-. But swiping my fingerprint over the home button does not spark any response, and I cannot enter my backup password at all.
1) I have tried powering off using the power button - this does not work. The power menu appears on the touchscreen and I cannot select it.
2) I've tried holding down the power button for 10+ seconds - this does nothing, which seems odd. Normally this will restart any device after a few seconds.
3) I've tried "power + vol up + vol -" all simultaneously. This forces the device to restart, but the problem is still present.
4) Tried running the battery down, then charging up and turning on... but it's the same outcome as (3).
5) tried wipe data/wipe cache/factory reset... it has gone back to the start-up screen, in Korean.... but the touchscreen still does not work!!!
Please... help me..!!!! lol
Bueller...Bueller.... Anyone...