how do u hard reset WM 2005 on xda II?? i tried search...cudnt find nething
hard reset WM2005
you have to make sure to follow the sequence correctly and keep all of them pressed fo 5-10 secs
Believe me this works!!
Press power putton
Then press Record Button
Then Press Camera Button
Then with Stylus press Reset Button
Use the recorder button and the camera butoon to scroll and change values.
After this you will see 3 options.
1 Kit = YES ------------------ change this to NO
2 Register Hive= No --------------- should remain NO
3 Storage = No --------------------- change this to YES
after this press the big round button b/w the call and call end buttons
the device reboots.
*this is taken from another post somewhere
My Qtek 2020 only hard reset if I press Power/ Recorder/ Notes/ Reset Button IN THE SAME TIME for only 1 sec.
Related
hi
my xda orbit keeps rebooting and i cant hard reset it. any ideas guys.
kevin
What happens when you take away the battery and plug it again.
Then You try to boot, it works ?
Then if not you try to hard reset, It works ?
Just to know...
startup bug
hi
when i take the battery out and put it back in the same thing happens i have tried to press in the two buttons and pressing the stylus in the hole but it wont hard reset.
kevin
Did you tried bootloader mode and then flash again the rom ?
how do i do that. i took the memory card out and it rebooted.
kevin
Taken from : http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
To do a hard reset.
Press both soft keys and insert stylus into soft reset button and press.
Release the soft reset button and keep pressing the soft keys.
When the "This operation will delete all your personal data, to manufacturer default" appears on screen.
Press Green call button to restore manufacturer default, or press other keys to cancel.
The bootloader is invoked by pressing down the Power and Voicedialer buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears.
startup bug
hi
thanks for your sugestions i took the memory card out and deleted some stuff from it and it works now. this seems to be a problem with the orbit as i have seen a few people mention it on various posts.
kevin
I was playing with my phone and lock it with a password...
I can't remenber what I put there...
Any way to revert this??...
it's a HTC621 and I'm using the htc rom...
found on net...
---- start crtl+<c> / crtl+<v>
This can be tricky, So I know from trial and error, Since there are not many guides out there that explain in detail on how to do this, with this particular device, I have decided to go ahead and make one up for you guys.
Here are the steps:
Step One:
Preform power down *Hold the power button* Till the phone is 100% powered down and all you see is a black screen
*keep in mind if your device is plugged into a power source or computer link this will not work!*
Step Two:
(Use both hands while doing this it will be much easier!)
Place 1 finger on each of the Soft keys.
http://i82.photobucket.com/albums/j271/thesr5_2006/dash.gif
Step Three:
Press the power Button and hold for no more than 2 sec well holding the two soft keys (do not hold the power button till the phone turns on) ONLY PRESS THE POWER BUTTON DO NOT TURN THE PHONE ON. After pressing the power key keep your fingers on the Two Soft keys until you see a the phone turn on and a black screen come up with white writing. Once you see this screen Press the Green Send key and there you go you have just performed a hard reset on the T-Mobile dash without using the settings screen on the phone. 8)
---- end crtl+<c> / crtl+<v>
holpe it helps some one with similar problems...
pls someone make it sticky...
BV
How to hardware reset Touch Pro2?
RHOD100 MFG 32M SS-BC 0.74.1000
I recive answer from HTC:
The way you do a hard reset on a touch Pro 2 is :
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
3. Release the VOLUME UP and VOLUME DOWN buttons, press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset
Thank you once again for your continued patronage.
Best regards, Europe customer support team HTC Corp. Global Service Division
But, this instruction not work.
Try holding the Vol Up and Down together and Reseting with the Stylus. (Just a guess BTW )
P.S. Did you get my PM ?
Thanks
Dave
DaveShaw said:
Try holding the Vol Up and Down together and Reseting with the Stylus. (Just a guess BTW )
P.S. Did you get my PM ?
Thanks
Dave
Click to expand...
Click to collapse
Not Work
Does it get to the point where it shows you a reset message on screen?
This is screen
Goran Anicic said:
This is screen
Click to expand...
Click to collapse
From what I've read about the Topaz:
Hold Vol UP and Vol DOWN together (keep them pressed down and do not release). Then press the reset button with the Stylus and hold it for a few seconds, then remove the stylus keeping vol up and down pressed.
Or if the device is off hold down Vol Up and Vol Down (keep them both pressed until you see the message) and then Power On.
A Hard Reset is usually a two button combo whilst the device is powering on (either from a reset or from a cold boot).
Dave
That screen reads like the software is dead due to it being a beta test.
Jacina said:
That screen reads like the software is dead due to it being a beta test.
Click to expand...
Click to collapse
Yep, but you can still Hard Reset and change the date.
Ta
Dave
I have the same problem. Can anybody PM me with a solution to this? Tried all I know and nothing works...
Ok, here it is.
To hard reset Touch PRO 2 you have to press power + start call (green) + end call (red) buttons. Hold them all and press reset button. Keep holding them untill you see screen that says to press volume up button to reset .
Ciciban said:
Ok, here it is.
To hard reset Touch PRO 2 you have to press power + start call (green) + end call (red) buttons. Hold them all and press reset button. Keep holding them untill you see screen that says to press volume up button to reset .
Click to expand...
Click to collapse
And what am I supposed to do with my other four arms whilst I'm doing that?
rb14 said:
And what am I supposed to do with my other four arms whilst I'm doing that?
Click to expand...
Click to collapse
LMAO now that just made my morning..( idont have a pro2 just skimming through threads lol but u made my day )
daeshawn said:
LMAO now that just made my morning..( idont have a pro2 just skimming through threads lol but u made my day )
Click to expand...
Click to collapse
Haha, me 2.
Think he meant to say, turn the phone off, hold start call and end call keys and then press power on while holding down the two buttons. Nothing needed with the reset button.
Ciciban said:
Ok, here it is.
To hard reset Touch PRO 2 you have to press power + start call (green) + end call (red) buttons. Hold them all and press reset button. Keep holding them untill you see screen that says to press volume up button to reset .
Click to expand...
Click to collapse
yes this is accurate and just so you guys know, this is in the manual lol.
mallman said:
yes this is accurate and just so you guys know, this is in the manual lol.
Click to expand...
Click to collapse
There is this saying amongst IT guys... RTFM = Read the ****ing Manual
hehe mostly the answer is closer than u think
Wrong post.
DELETE
mallman said:
yes this is accurate and just so you guys know, this is in the manual lol.
Click to expand...
Click to collapse
Manual? Think I threw mine away when I got it Never read the manual
Ciciban said:
Ok, here it is.
To hard reset Touch PRO 2 you have to press power + start call (green) + end call (red) buttons. Hold them all and press reset button. Keep holding them untill you see screen that says to press volume up button to reset .
Click to expand...
Click to collapse
Thanks! That did it! Team effort though!
What is this, some pre-release touch pro 2?
For those of us who get frustrated with the reset button being hidden under the TP2 cover, I'm happy to have just discovered that you don't even need to go there... Just hold down the volume down button and do a soft reset from within the software and hey presto. Same result.
For a hard reset?
Never needed a stylus.
Just navigate to Settings - All Settings - System - Clear storage - 1234 - Done.
Easy enough with my finger.
And where do you find a soft-reset button on you Rhodium??
(I had to install Smaberg's util for a softreset button)
personally I downloaded the "reboot" app from the market place...
ronh said:
And where do you find a soft-reset button on you Rhodium??
(I had to install Smaberg's util for a softreset button)
Click to expand...
Click to collapse
take the cover off, opposite side of the vol. buttons.
Holding down the volume? That doesn't do anything on my Tilt2.
I usually use the HD Soft Reset applet that installs along with HD Tweak (placed it in the TouchFlo Programs tab for quick access). Or else I just hold the power button to shutdown, then power up again. The latter "usually" works when other things on the phone are locking up. But occasionally the phone will be completely frozen, and I need to resort to the stylus button inside the battery cover.
Vol Down? this accesses the boot loader not Hard Reset!
in anycase you don't need the stylus my friend.
Hard Reset : Switch Off the phone, hold call + endcall and power button.
Boot Loader : Switch off the phone, Hold Vol Down + power button.
cheers
^ What he said. I just hard reset the other day using this method, worked like a charm
Any way to reset the phone when it's locked up without taking the cover off?
Is there a way to manually hard reset the TP2 w/o having to go into settings??
Please help!!
Turn off your phone completely. If buttons and touch screen become unresponsive, pull the battery out.
Hold both "send" and "end" button, then press and hold "power" button. Follow the on screen instructions.
for verizon
Hold down the end key till the device powers off, then hold volume down, send
and end till you see blue text on a white background. Follow hard reset prompt
http://forum.ppcgeeks.com/showthread.php?t=85339
I think this is for the At&t version below
1. Turn off the TP2. In my case, I had to pull the battery out since the on-off button didn't work
2. Press and hold the SEND and END keys simultaneously
3. While continuing to hold the SEND and END keys, press the POWER BUTTON (a bit of finger contortion here)
4. Press the VOLUME UP button
amurch said:
Is there a way to manually hard reset the TP2 w/o having to go into settings??
Please help!!
Click to expand...
Click to collapse
Hold the TALK, END, and backlight( on top of the phone) With the phone off till you get the reset screen. or if the phone is on then hold all 3 and use the stylus to hit the reset button till you get to the screen to reset.
Info found here