Related
Read carefully please!
Froyo and Windows users only at this moment, very busy this days, will make it work with linux and mac os!:
For those who flashed the SBF file with RSD Lite.
Im just trying to make it all easier.
Click to expand...
Click to collapse
You dont need adb installed on your PC!
TIPs: pass MOTOBLUR SETUP.
When you are on the begining of motoblur setup after you flashed your phone, (long press menu) to use the keyboard then type: eebluroff.
You must be done now!
Click to expand...
Click to collapse
Download the zip file and unzip it wherever you want.
Enable "USB debugging" on the phone before proceeding.
Settings -> Applications -> Development -> USB debugging.
1 - Connect your phone to PC (wait for your PC to install drivers) and click on "Install Gingerbreak & 2ndInitDefy".
Note: When commands window closes automatically, check if Gingerbreak and Defy 2init are installed on the phone (MOTOROLA SIDELOADER IS INSTALLED TOO to enable non-market apps), if they are everything is going fine.
2 - Unplug the phone from your PC.
3 - Open Gingerbreak installed on your phone and click on "Root device", (it will take a while) later your phone will reboot when completed.
4 - When your phone boots, go to 2ndinitDefy installed on your phone and download a recovery (try lastest version).
5 - Turn off the phone and turn it on, when you see the led light is blue press volume down button.
You are alredy into bootmenu ready to flash!
Click to expand...
Click to collapse
Donwload:
http://www.mediafire.com/?6kbt33kx64xg11e
I tested it on my PC but I need somebody else to test it, I have adb installed on my PC, need somebody who does not have it installed.
You wont need superoneclick anymore to root!
I will make a video later! I installed Ubuntu I will try it in linux to make this work for every OS and why not MAC OS!
josuearisty said:
Froyo users only:
For those who flashed the SBF file with RSD Lite.
Im just trying to make it all easier.
Testers needed
You dont need adb installed on your PC!
Download the file, unzip it wherever you want.
Remember to enable "USB debugging" before proceding.
Settings -> Applications -> Development -> USB debugging.
Then click on "Install Gingerbreak & 2ndInitDefy"
1 - Open Gingerbreak installed on your phone and click on "Root device", your phone will reboot when completed.
2 - Go to 2ndinitDefy installed on your phone and download a recovery (try lastest version).
Donwload:
http://www.mediafire.com/?6kbt33kx64xg11e
I tested it on my PC but I need somebody else to test it, I have adb installed on my PC, need somebody who does not have it installed.
You dont need superoneclick anymore to root!
Click to expand...
Click to collapse
Hola puedes poner las instrucciones en español y para que sirve ...perdon x mi ignoracia es
Es mejor Gingleblur q froyo cuales son las ventajas y las contras...saludos amigo....
Hi there,
May I know if there is a way to switch from CWM recovery to TWRP? I tried to simply flash the zip for TWRP but then my bravo won't start...
Thanks.
mataflakitas said:
Hola puedes poner las instrucciones en español y para que sirve ...perdon x mi ignoracia es
Es mejor Gingleblur q froyo cuales son las ventajas y las contras...saludos amigo....
Click to expand...
Click to collapse
Voy a hacer guias en español para cada thread que he creado
Esto es para si algo te ha salido mal y tu telefono no quiere iniciar quedandose solamente en el logo de moto y tienes que por desgracia FLASHEAR el SBF de Froyo con RSD LITE.
Entonces despues que estes en Froyo, podras seguir estos pasos y no tener que usar superoneclick, en mi opinion esto es mas facil.
Pruebalo cuando puedas!
brucezyc said:
Hi there,
May I know if there is a way to switch from CWM recovery to TWRP? I tried to simply flash the zip for TWRP but then my bravo won't start...
Thanks.
Click to expand...
Click to collapse
I try doing it too but no success, I think you should flash first a custom rom, then you will be able to flash touch recovery and it will for sure work.
I will let know about some test I make!
I'll be honest, I didn't try it, but it will work. That's really not a bad idea and would work with any phone Gingerbreak works on....You should release that in Android General.
I would use it, I'm just too lazy to flash an sbf and then set my phone back up again. I'm happy with my Bravo for the moment...and its my onlyl phone...That really is a simple, yet useful, solution.
gracias
josuearisty said:
Voy a hacer guias en español para cada thread que he creado
Esto es para si algo te ha salido mal y tu telefono no quiere iniciar quedandose solamente en el logo de moto y tienes que por desgracia FLASHEAR el SBF de Froyo con RSD LITE.
Entonces despues que estes en Froyo, podras seguir estos pasos y no tener que usar superoneclick, en mi opinion esto es mas facil.
Pruebalo cuando puedas!
I try doing it too but no success, I think you should flash first a custom rom, then you will be able to flash touch recovery and it will for sure work.
I will let know about some test I make!
Click to expand...
Click to collapse
Oooo muchas gracias amigo voy a probar que suerte q hablas español estoy aprendiendo muchas cosas contigo amigo josuearisty... saludos
oh no, i'm not unglug my phone after install Install Gingerbreak & 2ndInitDefy, then i click Gingerbreak to root
and now it's not on (, just have logo motorola
help me
now i'm ok, i wipe data, cache and do it again
but i dont click root on Gingerbreak , but on my phone still have superuser icon ? it success or not
i used superoneclick to root, but not success after i installed Gingerbreak & 2ndInitDefy
skeevy420 said:
I'll be honest, I didn't try it, but it will work. That's really not a bad idea and would work with any phone Gingerbreak works on....You should release that in Android General.
I would use it, I'm just too lazy to flash an sbf and then set my phone back up again. I'm happy with my Bravo for the moment...and its my onlyl phone...That really is a simple, yet useful, solution.
Click to expand...
Click to collapse
I think it is still not that simple, I will post some tips and be more specif.
mataflakitas said:
Oooo muchas gracias amigo voy a probar que suerte q hablas español estoy aprendiendo muchas cosas contigo amigo josuearisty... saludos
Click to expand...
Click to collapse
Siempre mi amigo, cualquier cosa estamos aqui.
kevins547 said:
oh no, i'm not unglug my phone after install Install Gingerbreak & 2ndInitDefy, then i click Gingerbreak to root
and now it's not on (, just have logo motorola
help me
now i'm ok, i wipe data, cache and do it again
but i dont click root on Gingerbreak , but on my phone still have superuser icon ? it success or not
i used superoneclick to root, but not success after i installed Gingerbreak & 2ndInitDefy
Click to expand...
Click to collapse
Maybe you did not follow steps as you should, I think I have to make steps easier to understand, so that noobs and advanced users can do it all.
Thanks for trying!
when unglug the phone from Pc, the box USB debugging is tick in or not ?
kevins547 said:
when unglug the phone from Pc, the box USB debugging is tick in or not ?
Click to expand...
Click to collapse
Of course it has to be enable.
Else it is not going to work.
gracias
josuearisty said:
Of course it has to be enable.
Else it is not going to work.
Click to expand...
Click to collapse
amigo podra subir un video para saber con mayor facilida como se hace y las instrucciones en español bueno tambien para ingles claro... creo que novatos como yo ...avemos muchos en este foro y estariamos muy agradecicdo con usted amigo josuearisty ...
oye amigo otra duda que pasa si mi pc tiene adb instalado.... puede ocacionar un error en mi motorola bravo ...?
otra duda por que cuando baje su archivo mi pc me lo detecto como un virus...
mataflakitas said:
amigo podra subir un video para saber con mayor facilida como se hace y las instrucciones en español bueno tambien para ingles claro... creo que novatos como yo ...avemos muchos en este foro y estariamos muy agradecicdo con usted amigo josuearisty ...
oye amigo otra duda que pasa si mi pc tiene adb instalado.... puede ocacionar un error en mi motorola bravo ...?
otra duda por que cuando baje su archivo mi pc me lo detecto como un virus...
Click to expand...
Click to collapse
Esta semana estare algo ocupado, el video creo que lo hare la semana que viene.
Usar el adb del archivo no te va a ocasionar ningun problema, ni a tu telefono ni a la computadora.
La aplicacion gingerbreak tiene un exploit dentro y los antivirus lo identifican como un virus, solo desactivalo si lo vas a usar.
--------------------------------------------------------
If you have adb installed on your pc, using this one will cause no problem to the phone or your pc.
Your antivirus detects gingerbreak as a virus because of an exploit command inside the apk file, you can deactivate your antivirus and use it with no problem, no risk with it.
I'll add, s1c/rage against the cage/gingerbreak all show up as viruses because they are. Not kill you PC virus, but virus none the less. Technically they're exploits, but still get picked up by scanners.
Gonna need some testers for LINUX and MAC, when its ready I will you know people!
Working great!. Will flash a Rom right now . Thnx to make our life easier!.
Took a few flashes, but I got there in the end! Great stuff, thanks!!
Worked like a charm. Thanks!!
Root the Motorola XT389 with Android 2.3.6
Dear friends this mobile users who were already giving up rooting your device ...
your problems are over!
After long research, I could find a forum that I am associated with the root of the XT389!
Tested and approved! 100% approved without any error!
Follow below correctly questions, please ask!
Making:
1) Download drivers for motorola XT390 and XT389 on the following link: HERE!
2) Install the drivers you downloaded in step 1, make sure your phone is unplugged during installation.
3) After installing the drivers enable USB Debugging in Settings> Applications> Development> USB Debugging
4) After step 3 connect the usb cable in the phone and the computer, the computer will recognize your phone and install drivers, wait until your computer recognizes all drivers.
The following software is Chinese and obviously is all in Chinese, to run it you will need to install a software called microsoft AppLocale (link here) How to install AppLocale on windows vista, 7 or 8: http://www.youtube.com/watch?v=9t9iZJBwNA0&feature=youtu.be
In Windows XP before running the Chinese application will need to install the East Asian languages: Control Panel -> Regional and Language Options.
5) Now we will download and install the software which will make root: HERE!
6) Installation is easy although it was in Chinese, giving just go next, the only option you have is to uncheck that option is checked at the end of the installation (it will start the program after installation and we do not want that because will give error.) Now that the program is installed, note that he created two icons on the desktop, an all blue and other colors of blue, green and orange.
7) Rename the icon for all bluish Romaster
8) Open AppLocale you installed just now, when you open click next.
9) an option will appear for you to select a file, select the shortcut to Romaster (all blue icon) that is on the desktop and click next
10) It will detect the language of the program automatically, just press next and then finish.
finish Clicking the following program must be open:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you've done steps 1, 2, 3 and 4 correctly it will automatically recognize your device and it will sync with your handset right away. sync with the handset it will automatically install the control software on your USB device, wait until the program becomes as follows:
NOTE: The program will install a root or two apps necessary for root on your phone, you'll need at least 20MB free on internal memory.
11) At first tab in the program click on the link that is inside the red rectangle:
It will ask if you really want to start the process of root, just confirm by clicking on the esqueda.
During the root the following message will appear:
The root process will take a while and the phone will reboot several times (do not be alarmed), NEVER remove or disconnect the phone during the root process.
Wait for your phone to restart it stop start the system again.
12) After your phone have started normally, close the Romaster disconnect the USB cable from your phone
13) [Optional] Uninstall the app Chinese USB integration that was installed by Romaster Ready your Motorola XT389 is rooted. At the end of the install root checker to verify your phone is really rooted.
Note: After the unit is rooted not in any way disable the USB debugging or root will stop working and the system is unstable.
Original Link : http://xt389android.blogspot.com/20...howComment=1365888785078#c1860513348790449516
Hope this helps.
How to hard reset.
I want to know how to how to hard reset motorola xt389.
As i have forgoten screen patteren and gmail account is not working.
Thanks in advance.
It Works!
Just completed this tutorial. It worked perfectly.
I only sugest that you try using the tutorial available in the original link at the bottom of the page, even if it's in portuguese. (Use google page translation)
Thank you for this tutorial!
This method works. :thumbup:
Sent from my XT389 using Tapatalk 2
what to push when in the chinese program?
^ Check the screenshots in original image
Help
Hi,
I have followed the instructions to the letter but when I open Applocale and then open Romaster shortcut I get a box with chinese writing (I dont know what it says) with a yellow triangle next to it with the only option to close the box.
It simply not opening or connecting to phone?
I have tried uninstalling everything and reinstalling going back to very start and its still doing it.
Any suggestions?
I would add a screenshot if this thread would let me!!!
how do you change the language on the program?
It works! ROOT XT389 Funciona (pero no como lo pone este tuto)
I have one XT389 and the program (the link download one updated version...and different) root it!!! Unfortunately the tutorial dont refers to this new version. For that reason I had to walk blindly. Only need to translate from chinese the words "permit" "Ok" "afirmative" and "yes" to guess the actions.
En español: Vamos, un coñazo, pero al final después de un par de intentos pulsando iconos en chino el movil se reseteó. Esto ocurrió después de que se me instalara la aplicación china en el mismo. Imposible recordar los pasos que hice, pero si es importante que el movil se quede con la pantalla de esta aplicación arrancada (una pantalla azul el movil con textos en chino y el simbolo de que esta conectado por USB.....) y después en uno de los menus pone algo de ROOTXXXX y ROOTXXX? (las xxx son simbolos chinos). Toque por ahí y zas! se reseteó y ya estaba, pero aun tuve que activar el ROOT en el propio movil. Se arranca la aplicación y sale un botón que aparece con el logo de android y root con una x roja, si le das al botón se te pone el verde y ....violá!
Eso si, también he liberado el ZTE Blade de mi novia con este jodido programa!!! que lástima que no se pueda traducir, dan ganas de ir palabra x palabra haciendolo, porque me da que esto libera hasta el plus!
Newsecs declare
I need to find some custom roms for the motorola xt389 and how to get clockwork recovery
Fantastic!!
Eddie_West said:
I have one XT389 and the program (the link download one updated version...and different) root it!!! Unfortunately the tutorial dont refers to this new version. For that reason I had to walk blindly. Only need to translate from chinese the words "permit" "Ok" "afirmative" and "yes" to guess the actions.
En español: Vamos, un coñazo, pero al final después de un par de intentos pulsando iconos en chino el movil se reseteó. Esto ocurrió después de que se me instalara la aplicación china en el mismo. Imposible recordar los pasos que hice, pero si es importante que el movil se quede con la pantalla de esta aplicación arrancada (una pantalla azul el movil con textos en chino y el simbolo de que esta conectado por USB.....) y después en uno de los menus pone algo de ROOTXXXX y ROOTXXX? (las xxx son simbolos chinos). Toque por ahí y zas! se reseteó y ya estaba, pero aun tuve que activar el ROOT en el propio movil. Se arranca la aplicación y sale un botón que aparece con el logo de android y root con una x roja, si le das al botón se te pone el verde y ....violá!
Eso si, también he liberado el ZTE Blade de mi novia con este jodido programa!!! que lástima que no se pueda traducir, dan ganas de ir palabra x palabra haciendolo, porque me da que esto libera hasta el plus!
Click to expand...
Click to collapse
De puta madre mi hermano!! si no me decías lo de la pantalla celeste y buscar el botón ROOTXXXX y ROOTXXX no la hacía!
Muchas gracias mi bro!
We must to say this tutorial has changed. We need make 1 step more inside of the chinese program. We just to search a tab called "RootXXX / ROOTXXX" and click first button. That's all! :good:
Again something changed
so what you need is still driver and new program. it`s much easyer. just install program, open it....wait for update...put phone to cable, wait untill program find phone, press root, wait till phone restart, ready
Step two is flash TWRP Customrecovery 100% working touch recovery.
just press XT303.bat. Device need root before
u.bilal said:
I want to know how to how to hard reset motorola xt389.
As i have forgoten screen patteren and gmail account is not working.
Thanks in advance.
Click to expand...
Click to collapse
Dude If you want To Hard reset Its Easy Just Follow these Steps 1.. Turn Your Phone Completely Off and Remove the Battery 2.. Put the Battery Back In And While you Turn The Phone On Hold the Power Button and The Volume down Button
3.. Then Use the Volume Keys To Naigate Through The Menu and The Power Button to select Enjoy
phone-company said:
Step two is flash TWRP Customrecovery 100% working touch recovery.
just press XT303.bat. Device need root before
Click to expand...
Click to collapse
Has anyone else tested this? Is it 100% safe for the xt389? (Considering it's called XT303.bat, I'm a little worried to try it on my phone.)
phone-company said:
Again something changed
so what you need is still driver and new program. it`s much easyer. just install program, open it....wait for update...put phone to cable, wait untill program find phone, press root, wait till phone restart, ready
Click to expand...
Click to collapse
is it working?
guyton100 said:
is it working?
Click to expand...
Click to collapse
its wotking !!!!
how to enter recovery, none of the key combinations are working?
---------- Post added at 01:36 PM ---------- Previous post was at 01:29 PM ----------
guyton100 said:
its wotking !!!!
how to enter recovery, none of the key combinations are working?
Click to expand...
Click to collapse
i can still enter recovery by using terminal emulator!
su
reboot recovery
but please tell me key combination if someone knows, i tried everything i known and that i came across internet
to disable button backlight use
https://play.google.com/store/apps/details?id=com.deskangel.kblight&hl=en
How to enter CustomRecovery
switch of phone and wait a while. Press Power Button and after display switch on press Volume down for a second..leave it and agin press volume down and so on
phone-company said:
How to enter CustomRecovery
switch of phone and wait a while. Press Power Button and after display switch on press Volume down for a second..leave it and agin press volume down and so on
Click to expand...
Click to collapse
Actually you just need to press Volume down when you see the tactile buttons flash, before the boot animation.
Hi, everyone
I have the galaxy a50 505g and I would like to know if it is possible to install TWRP by Termux, since I have tried to install it by Odin without positive result (the device restarts again and again and I can not get it into recovery mode) and also with the Magisk patch (to which I have my device rooted with this tool). I have also tried with ADB, however it does not recognize my device in download mode
If any of you can help me I would greatly appreciate it.
In advance, thank you all for reading.
Original text
Tengo el galaxy a50 505g y me gustaría saber si es posible instalar TWRP por Termux, ya que he instentado instalarlo por Odin sin resultado positivo ( el dispotitivo se reinicia una y otra vez y no logro hacer que entre a modo recovery) y también con el parche de Magisk (a que tengo mi dispositivo rooteado con esta herramienta). También lo he intentado con ADB, sin embargo no reconoce mi dispositivo en modo descarga
Si alguno de ustedes me puede ayudar se los agradecería mucho.
De antemano, gracias a todos por leer.
Nope, when the device is in download mode only Odin can detect it not ADB. Install it through Odin only
RandomAJL said:
Nope, when the device is in download mode only Odin can detect it not ADB. Install it through Odin only
Click to expand...
Click to collapse
Oh, OK. Thanks for your feedback.
I will have to keep trying
Hi everyone,
I have a big problem since yesterday, I am under the version Miui 11 Android 10 rooted under TWRP unofficial and I wanted to install a Rom Custom, I of which wanted to install the official version of TWRP, when I have Flash Recovery Recovery.img after restarting... BLACK SCREEN I could not have returned to FASTBOOT mode and in RECOVERY only the NOTIFICATION which is on, when I stay press POWER + VOLUM UP I have a SOUND on PC like what the PHONE is connected for 5 SECONDS after it DISCONNECTS, so I followed a tutorial to open my phone and disconnect my BATTERY... always the same problem :/
if you can help me please :/
I would like to specify that I never know that when I wanted to put the official version of TWRP my phone was around 30% ... ?
Thanks you.
Test Point
Tiix31Dev said:
Hi everyone,
I have a big problem since yesterday, I am under the version Miui 11 Android 10 rooted under TWRP unofficial and I wanted to install a Rom Custom, I of which wanted to install the official version of TWRP, when I have Flash Recovery Recovery.img after restarting... BLACK SCREEN I could not have returned to FASTBOOT mode and in RECOVERY only the NOTIFICATION which is on, when I stay press POWER + VOLUM UP I have a SOUND on PC like what the PHONE is connected for 5 SECONDS after it DISCONNECTS, so I followed a tutorial to open my phone and disconnect my BATTERY... always the same problem :/
if you can help me please :/
I would like to specify that I never know that when I wanted to put the official version of TWRP my phone was around 30% ... ?
Thanks you.
Click to expand...
Click to collapse
I am writing this for anyone to use at their own risk, it is not complicated.
Once updated from Indonesia Miui 11 Android 9 rom to Android 10 and installed a recovery incorrectly and I have returned to
lock my Redmi Note 8 Pro (Begoña) and this time I have not waited for the battery to drain as in the previous one (post # 196)
I have used the Test Point method.
This is what I have done:
-Copied the folder from the Indonesian rom V10.4.2.0, once the zip is unzipped, in Computer> C
-Installed SP Flash Tool v5. 1924 Win also in C
-Removed the back of the mobile and removed the housing that is above the battery (Photo 1).
-Prepared a piece of fine copper wire, I have connected one end to a screw on the mobile plate making ground (Photo 2) and to
the other end I have connected a nail (Photo 4) .Then I have opened the Flash Tool and I have put the scatter that
*it is in the "images" folder of the rom that I had copied in C, and the DA and the authentication file that is in it
*Flash Tool folder and I have connected the usb cable to the mobile, only to the mobile.
-I pressed "Download Only" and connected the other end of the copper cable, prepared with a nail, in the
*point Kcol0 (Photo 3) and I have connected the usb cable to the computer. The bottom bar of the FlashTool has started to fill in
*color red first and then change color until the "Download Ok" symbol appears
*I have done it with the battery disconnected (others say it is connected) and with all the files marked on the
*Flash Tool (others say that you only have to mark the preolader) and it has worked for me.
*
After a few minutes the mobile has started with MIUI 10 and Android 9, as expected by the rom with which I have done it and
then I have already installed MIUI 11 and then I have updated to Android 10, both with MiFlash20191206 of Xiaomi. To finish
installing the appropriate recovery, this time yes, and doing root
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
Esto lo escribo para que lo use quien quiera siempre bajo su propia responsabilidad, no es complicado.
Una vez actualizado de rom Indonesia Miui 11 Android 9 a Android 10 e instalado un recovery de forma incorrecta y he vuelto a
bloquear mi Redmi Note 8 Pro (Begoña) y esta vez no he esperado a que se agote la batería como en la anterior (post #196)
sino que he usado el método del Test Point.
Esto es lo he hecho:
-Copiado la carpeta de la rom de Indonesia V10.4.2.0, una vez descomprimido el zip, en Equipo > C
-Instalado SP Flash Tool v5. 1924 Win también en C
-Desmontado la trasera del móvil y quitado la carcasa que hay por arriba de la batería (Foto 1).
-Preparado un trozo de cable fino de cobre, un estremo lo he conectado a un tornillo en la placa del móvil haciendo masa(Foto 2)
y al otro extremo le he conectado un clavo (Foto 4).luego he abierto el Flash Tool y he puesto el scatter que
hay en la carpeta "images" de la rom que que había copiado en C, y el DA y archivo de autentificación que hay en la propia
carpeta del Flash Tool y he conectado el cable usb al móvil, solo al móvil.
-He pulsado "Download Only" y he conectado el otro extremo del cable de cobre, preparado con un clavo, en el
punto Kcol0 (Foto 3) y he conectado el cable usb al ordenador. La barra de abajo del FlashTool ha empezado a rellenarse en
color rojo primero y luego cambia de color hasta que aparece el simbolo "Download Ok"
Lo he hecho con la batería desconectada (otros dicen que conectada) y con todo los archivos marcados en el
Flash Tool (otros dicen que sólo hay que marcar el preolader) y me ha funcionado.
Después de unos minutos se ha iniciado el móvil con MIUI 10 y Android 9, como era de esperar por la rom con la que lo he hecho y luego ya le he instalado
MIUI 11 y después he actualizado a Android 10, los dos con MiFlash20191206 de Xiaomi. Para terminar instalando el recovery
apropiado, esta vez sí, y haciendo root
javizeta said:
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
The first time it crashed I revived it waiting for the battery to drain (post # 196) and now I have it back
to briquet when flashing wrong twrp and I have not waited for it to be exhausted again but I have done it
with a test point.
In photos two and three I show you where you have to connect the cable and privately I send you a link to an explanatory video
because I don't know if I can put links to youtube here.
It worked perfectly for me on the first try.
Click to expand...
Click to collapse
hey how to do me a favor pass the tutorial because I have the same problem:fingers-crossed:
maikiller said:
hey how to do me a favor pass the tutorial because I have the same problem:fingers-crossed:
Click to expand...
Click to collapse
I used the google search engine: tutorial to unbrick Chinese MTK phone and in the results I chose the Azlan Laion video.
Utilicé el buscador de google: tutorial desbrickear telefono MTK chino y en los resultados elegí el video de Azlan Laion.
Updated post # 2
Read please
Actualizado post #2
Leer, por favor
I definitely would appreciate anything that would get this flash to go through... I already have mine apart and have been trying everything to get it unbricked with no success as of yet...
Sent from my Redmi Note 8 Pro using XDA-Developers Legacy app
javizeta said:
I am writing this for anyone to use at their own risk, it is not complicated.
Once updated from Indonesia Miui 11 Android 9 rom to Android 10 and installed a recovery incorrectly and I have returned to
lock my Redmi Note 8 Pro (Begoña) and this time I have not waited for the battery to drain as in the previous one (post # 196)
I have used the Test Point method.
This is what I have done:
-Copied the folder from the Indonesian rom V10.4.2.0, once the zip is unzipped, in Computer> C
-Installed SP Flash Tool v5. 1924 Win also in C
-Removed the back of the mobile and removed the housing that is above the battery (Photo 1).
-Prepared a piece of fine copper wire, I have connected one end to a screw on the mobile plate making ground (Photo 2) and to
the other end I have connected a nail (Photo 4) .Then I have opened the Flash Tool and I have put the scatter that
*it is in the "images" folder of the rom that I had copied in C, and the DA and the authentication file that is in it
*Flash Tool folder and I have connected the usb cable to the mobile, only to the mobile.
-I pressed "Download Only" and connected the other end of the copper cable, prepared with a nail, in the
*point Kcol0 (Photo 3) and I have connected the usb cable to the computer. The bottom bar of the FlashTool has started to fill in
*color red first and then change color until the "Download Ok" symbol appears
*I have done it with the battery disconnected (others say it is connected) and with all the files marked on the
*Flash Tool (others say that you only have to mark the preolader) and it has worked for me.
*
After a few minutes the mobile has started with MIUI 10 and Android 9, as expected by the rom with which I have done it and
then I have already installed MIUI 11 and then I have updated to Android 10, both with MiFlash20191206 of Xiaomi. To finish
installing the appropriate recovery, this time yes, and doing root
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
Esto lo escribo para que lo use quien quiera siempre bajo su propia responsabilidad, no es complicado.
Una vez actualizado de rom Indonesia Miui 11 Android 9 a Android 10 e instalado un recovery de forma incorrecta y he vuelto a
bloquear mi Redmi Note 8 Pro (Begoña) y esta vez no he esperado a que se agote la batería como en la anterior (post #196)
sino que he usado el método del Test Point.
Esto es lo he hecho:
-Copiado la carpeta de la rom de Indonesia V10.4.2.0, una vez descomprimido el zip, en Equipo > C
-Instalado SP Flash Tool v5. 1924 Win también en C
-Desmontado la trasera del móvil y quitado la carcasa que hay por arriba de la batería (Foto 1).
-Preparado un trozo de cable fino de cobre, un estremo lo he conectado a un tornillo en la placa del móvil haciendo masa(Foto 2)
y al otro extremo le he conectado un clavo (Foto 4).luego he abierto el Flash Tool y he puesto el scatter que
hay en la carpeta "images" de la rom que que había copiado en C, y el DA y archivo de autentificación que hay en la propia
carpeta del Flash Tool y he conectado el cable usb al móvil, solo al móvil.
-He pulsado "Download Only" y he conectado el otro extremo del cable de cobre, preparado con un clavo, en el
punto Kcol0 (Foto 3) y he conectado el cable usb al ordenador. La barra de abajo del FlashTool ha empezado a rellenarse en
color rojo primero y luego cambia de color hasta que aparece el simbolo "Download Ok"
Lo he hecho con la batería desconectada (otros dicen que conectada) y con todo los archivos marcados en el
Flash Tool (otros dicen que sólo hay que marcar el preolader) y me ha funcionado.
Después de unos minutos se ha iniciado el móvil con MIUI 10 y Android 9, como era de esperar por la rom con la que lo he hecho y luego ya le he instalado
MIUI 11 y después he actualizado a Android 10, los dos con MiFlash20191206 de Xiaomi. Para terminar instalando el recovery
apropiado, esta vez sí, y haciendo root
Click to expand...
Click to collapse
----------
Your method does not work because it depends on the motherboard you are using, for example the Mediatek uses another type of test point and they are blocked, I think that is why Xiaomi does not want to give more support to the Xiaomi Redmi Note 8 Pro (Begonia) as devices!
I have tried it several times and it does not work, the only thing is a working method is: Having the volume up pressed until the Mode Flash mode is activated and with the SP Flash Tool. The problem is that it asks for an Authorized Account and it is what I am looking for (of course to payment)
The Procedure
0. Unzip your device's firmware.
1. Install MiFlashPro.
2. Navigate to (installation_directory)/MiFlashPro/SP_Flash_Tool/mi and run "account_auth.exe" (Run as administrator). In the window that opens, log in with an authorized Xiaomi Account.
3. Navigate to (installation_directory)/MiFlashPro/SP_Flash_Tool nad run "flash_tool.exe". The SP_Flash_Tool interface opens. Now you have to select the 3 files:
Download-Agent: (installation_directory)/MiFlashPro/SP_Flash_Tool/MTK_AllInOne_DA_mt6765_mt6785.bin
Scatter-loading File: You will find this one on your stock rom folder, especially on the folder called "images".
Authentication File: (installation_directory)/MiFlashPro/SP_Flash_Tool/auth_sv5.auth
4. Press the "Download" button.
5. Connect the USB cable to your PC but NOT YET to your phone.
6. Hold the vol+ button on your phone pressed and NOW connect the cable to it.
7. The program should now react and start the flashing process without giving an error.
8. Wait for the flashing process to end and enjoy!
javizeta said:
I am writing this for anyone to use at their own risk, it is not complicated.
Once updated from Indonesia Miui 11 Android 9 rom to Android 10 and installed a recovery incorrectly and I have returned to
lock my Redmi Note 8 Pro (Begoña) and this time I have not waited for the battery to drain as in the previous one (post # 196)
I have used the Test Point method.
This is what I have done:
-Copied the folder from the Indonesian rom V10.4.2.0, once the zip is unzipped, in Computer> C
-Installed SP Flash Tool v5. 1924 Win also in C
-Removed the back of the mobile and removed the housing that is above the battery (Photo 1).
-Prepared a piece of fine copper wire, I have connected one end to a screw on the mobile plate making ground (Photo 2) and to
the other end I have connected a nail (Photo 4) .Then I have opened the Flash Tool and I have put the scatter that
*it is in the "images" folder of the rom that I had copied in C, and the DA and the authentication file that is in it
*Flash Tool folder and I have connected the usb cable to the mobile, only to the mobile.
-I pressed "Download Only" and connected the other end of the copper cable, prepared with a nail, in the
*point Kcol0 (Photo 3) and I have connected the usb cable to the computer. The bottom bar of the FlashTool has started to fill in
*color red first and then change color until the "Download Ok" symbol appears
*I have done it with the battery disconnected (others say it is connected) and with all the files marked on the
*Flash Tool (others say that you only have to mark the preolader) and it has worked for me.
*
After a few minutes the mobile has started with MIUI 10 and Android 9, as expected by the rom with which I have done it and
then I have already installed MIUI 11 and then I have updated to Android 10, both with MiFlash20191206 of Xiaomi. To finish
installing the appropriate recovery, this time yes, and doing root
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
Esto lo escribo para que lo use quien quiera siempre bajo su propia responsabilidad, no es complicado.
Una vez actualizado de rom Indonesia Miui 11 Android 9 a Android 10 e instalado un recovery de forma incorrecta y he vuelto a
bloquear mi Redmi Note 8 Pro (Begoña) y esta vez no he esperado a que se agote la batería como en la anterior (post #196)
sino que he usado el método del Test Point.
Esto es lo he hecho:
-Copiado la carpeta de la rom de Indonesia V10.4.2.0, una vez descomprimido el zip, en Equipo > C
-Instalado SP Flash Tool v5. 1924 Win también en C
-Desmontado la trasera del móvil y quitado la carcasa que hay por arriba de la batería (Foto 1).
-Preparado un trozo de cable fino de cobre, un estremo lo he conectado a un tornillo en la placa del móvil haciendo masa(Foto 2)
y al otro extremo le he conectado un clavo (Foto 4).luego he abierto el Flash Tool y he puesto el scatter que
hay en la carpeta "images" de la rom que que había copiado en C, y el DA y archivo de autentificación que hay en la propia
carpeta del Flash Tool y he conectado el cable usb al móvil, solo al móvil.
-He pulsado "Download Only" y he conectado el otro extremo del cable de cobre, preparado con un clavo, en el
punto Kcol0 (Foto 3) y he conectado el cable usb al ordenador. La barra de abajo del FlashTool ha empezado a rellenarse en
color rojo primero y luego cambia de color hasta que aparece el simbolo "Download Ok"
Lo he hecho con la batería desconectada (otros dicen que conectada) y con todo los archivos marcados en el
Flash Tool (otros dicen que sólo hay que marcar el preolader) y me ha funcionado.
Después de unos minutos se ha iniciado el móvil con MIUI 10 y Android 9, como era de esperar por la rom con la que lo he hecho y luego ya le he instalado
MIUI 11 y después he actualizado a Android 10, los dos con MiFlash20191206 de Xiaomi. Para terminar instalando el recovery
apropiado, esta vez sí, y haciendo root
Click to expand...
Click to collapse
excuse me , could u wirte in english on these pictures , i can not read ur Lang, please,:highfive::highfive: please
gadmei.tw said:
excuse me , could u wirte in english on these pictures , i can not read ur Lang, please,:highfive::highfive: please
Click to expand...
Click to collapse
These are the texts included in the photos translated into English using the google translator
Photo 2: It is to this screw that I have attached one end of the cable
Photo 3: Upper label: To this round contact you have to connect the other end of the cable
Bottom epigraph: It is just above the battery connector. Battery disconnected.
javizeta said:
These are the texts included in the photos translated into English using the google translator
Photo 2: It is to this screw that I have attached one end of the cable
Photo 3: Upper label: To this round contact you have to connect the other end of the cable
Bottom epigraph: It is just above the battery connector. Battery disconnected.
Click to expand...
Click to collapse
thank u!
i will try through these point
need video please/necesito el video por favor
hi budy, how could you send me the video?, i got the same problem with my redmi note 8 pro
Hola amigo, espero que te encuentres bien, ¿Como podrías enviarme el video?, tengo el mismo problema con mi redmi note 8 pro, se apagó y no ha encendido
leandro iván said:
hi budy, how could you send me the video?, i got the same problem with my redmi note 8 pro
Hola amigo, espero que te encuentres bien, ¿Como podrías enviarme el video?, tengo el mismo problema con mi redmi note 8 pro, se apagó y no ha encendido
Click to expand...
Click to collapse
What video are you referring to?
Hello, after several days trying to get Lineage with Magisk and NikGapps... I have succeeded.
I know that in this forum many people know much more than me and they will not need this tutorial, I am a newbie and this guide is for newbies. I accept corrections.
With my Xperia 10 I had a lot of problems. So I would like to return the help they have given me, the way is by writing this little guide.
1. First we unlock the bootloader:
2. (Optional) Install a clean Stock ROM with Emma (easier) or Newflasher (you need to download the firmware/ROM from Xperifirm first).
3. We put the mobile in Fastboot mode (Power + Vol-) and connect it to the computer. I had to use Linux on the computer, since Windows did not recognize the fastboot mode of the Xperia 10 (but it did in ADB).
4. The command to install TWRP is normally "fasboot boot twrp.img", but it didn't work for me (nor did others I tried). Only this one worked for me:
fastboot flash boot_a twrp.img
fastboot flash boot_b twrp.img
I used both. What this does is install TWRP on partitions A and B. It may be crazy, but it's the only thing that worked for me.
5. Start TWRP with Power+Vol-.
6. Install Lineage.
7. Reboot the System and check that Lineage loads.
8. From this step I had serious problems, because I was trying to keep TWRP (so I could install Magisk and Nikgapps). However, I couldn't get Lineage to work while having TWRP.
8.1. Start Lineage Recovery with Power+Vol-
8.2. "Apply update"
8.3. "Choose from disk"
8.4. Select Magisk-v21.1.zip
8.5. "Signature verification failed. Install anyway?" AND IT IS
8.6. We restart
9.1. Start Lineage Recovery with Power+Vol-
9.2. "Apply update"
9.3. "Choose from disk"
9.4. Select the Gapps file (in my case: NikGapps-core-arm64-11-20220222-signed.zip)
9.5. "Signature verification failed. Install anyway?" AND IT IS
9.6. We restart
I suppose that steps 8 and 9 can be done at once, but I preferred to do it that way for greater security.
Tutorial made in Spanish and translated into English:
---
Hola, tras varios días intentando conseguir tener Lineage con Magisk y NikGapps... lo he conseguido.
Sé que en este foro mucha gente sabe mucho más que yo y no le hará falta este tutorial, yo soy un novato y esta guía es para novatos. Acepto correcciones.
Con mi Xperia 10 tuve muchos problemas. Así que quisiera devolver la ayuda que me han prestado, la forma es escribiendo esta pequeña guía.
1. Primero desbloqueamos el bootloader:
2. (Opcional) Instalamos una ROM Stock limpia con Emma (más fácil) o Newflasher (hace falta primero descargar el firmware/ROM desde Xperifirm).
3. Ponemos el móvil en modo Fastboot (Power+Vol-) y lo conectamos al ordenador. Yo tuve que usar Linux en el ordenador, ya que Windows no me reconocía el modo fastboot del Xperia 10 (pero sí en ADB).
4. El comando para instalar TWRP normalmente es "fasboot boot twrp.img", pero a mí no me funcionó (tampoco otros que probé). Solamente me funcionó este:
fastboot flash boot_a twrp.img
fastboot flash boot_b twrp.img
Usé los dos. Esto lo que hace es instalar TWRP en las particiones A y B. Quizá sea una locura, pero es lo único que me funcionó.
5. Inicia TWRP con Power+Vol-.
6. Instala Lineage.
7. Reinicia el Sistema y comprueba que se carga Lineage.
8. A partir de este paso tuve serios problemas, porque yo intentaba conservar TWRP (y así poder instalar Magisk y Nikgapps). Sin embargo, no pude conseguir que Lineage funcionara teniendo TWRP.
8.1. Inicia el Recovery de Lineage con Power+Vol-
8.2. "Aplly update"
8.3. "Choose from disk"
8.4. Seleccionar Magisk-v21.1.zip
8.5. "Signature verification failed. Install anyway?" YES
8.6. Reiniciamos
9.1. Inicia el Recovery de Lineage con Power+Vol-
9.2. "Aplly update"
9.3. "Choose from disk"
9.4. Seleccionar el archivo de Gapps (en mi caso: NikGapps-core-arm64-11-20220222-signed.zip)
9.5. "Signature verification failed. Install anyway?" YES
9.6. Reiniciamos
Supongo que los pasos 8 y 9 pueden hacerse de una sola vez, pero yo preferí hacerlo así para mayor seguridad.
born2bkilled said:
has anyone had any luck getting magisk 21.1 to work with this rom and twrp yet?
im going round in circles trying to root after updating. i can install magisk from twrp, but i end up in a bootloop, then installing the bootloop fix from twrp wipes magisk and breaks root.
i know 21.1 is a beta and likely doesnt support sony phones yet, but someone might have a fix.
EDIT: I have root working now. Anyone having trouble, DONT install twrp to ramdisk. just leave the lineageOS recovery in place and use fastboot on a pc to boot twrp when you need it.
I did the following:
1. fresh stock firmware via newflash
2.flash sony software binaries for a11
3. fastboot boot twrp.img
4.swap to partition b
5. power off
6. fastboot boot twrp.img (check you are booted to partition b)
7. flash lineageos 18
8.reboot select partition a and POWER OFF
9. fastboot boot twrp.img
10. check partition is a
11. flash copy partition.zip
12. flash magisk 21.1.zip
13. flash nikGapps basic for a11
14. reboot system
15. install magiskmanager 8.0.3.apk
16. reboot
17. update your apps on playstore.
18. PROFIT.
lineage os18 rooted on my xperia 10.
Click to expand...
Click to collapse
I tried to do it this way, but it didn't work for me (maybe because I'm very new to Xperia).