Hi everyone,
I have a big problem since yesterday, I am under the version Miui 11 Android 10 rooted under TWRP unofficial and I wanted to install a Rom Custom, I of which wanted to install the official version of TWRP, when I have Flash Recovery Recovery.img after restarting... BLACK SCREEN I could not have returned to FASTBOOT mode and in RECOVERY only the NOTIFICATION which is on, when I stay press POWER + VOLUM UP I have a SOUND on PC like what the PHONE is connected for 5 SECONDS after it DISCONNECTS, so I followed a tutorial to open my phone and disconnect my BATTERY... always the same problem :/
if you can help me please :/
I would like to specify that I never know that when I wanted to put the official version of TWRP my phone was around 30% ... ?
Thanks you.
Test Point
Tiix31Dev said:
Hi everyone,
I have a big problem since yesterday, I am under the version Miui 11 Android 10 rooted under TWRP unofficial and I wanted to install a Rom Custom, I of which wanted to install the official version of TWRP, when I have Flash Recovery Recovery.img after restarting... BLACK SCREEN I could not have returned to FASTBOOT mode and in RECOVERY only the NOTIFICATION which is on, when I stay press POWER + VOLUM UP I have a SOUND on PC like what the PHONE is connected for 5 SECONDS after it DISCONNECTS, so I followed a tutorial to open my phone and disconnect my BATTERY... always the same problem :/
if you can help me please :/
I would like to specify that I never know that when I wanted to put the official version of TWRP my phone was around 30% ... ?
Thanks you.
Click to expand...
Click to collapse
I am writing this for anyone to use at their own risk, it is not complicated.
Once updated from Indonesia Miui 11 Android 9 rom to Android 10 and installed a recovery incorrectly and I have returned to
lock my Redmi Note 8 Pro (Begoña) and this time I have not waited for the battery to drain as in the previous one (post # 196)
I have used the Test Point method.
This is what I have done:
-Copied the folder from the Indonesian rom V10.4.2.0, once the zip is unzipped, in Computer> C
-Installed SP Flash Tool v5. 1924 Win also in C
-Removed the back of the mobile and removed the housing that is above the battery (Photo 1).
-Prepared a piece of fine copper wire, I have connected one end to a screw on the mobile plate making ground (Photo 2) and to
the other end I have connected a nail (Photo 4) .Then I have opened the Flash Tool and I have put the scatter that
*it is in the "images" folder of the rom that I had copied in C, and the DA and the authentication file that is in it
*Flash Tool folder and I have connected the usb cable to the mobile, only to the mobile.
-I pressed "Download Only" and connected the other end of the copper cable, prepared with a nail, in the
*point Kcol0 (Photo 3) and I have connected the usb cable to the computer. The bottom bar of the FlashTool has started to fill in
*color red first and then change color until the "Download Ok" symbol appears
*I have done it with the battery disconnected (others say it is connected) and with all the files marked on the
*Flash Tool (others say that you only have to mark the preolader) and it has worked for me.
*
After a few minutes the mobile has started with MIUI 10 and Android 9, as expected by the rom with which I have done it and
then I have already installed MIUI 11 and then I have updated to Android 10, both with MiFlash20191206 of Xiaomi. To finish
installing the appropriate recovery, this time yes, and doing root
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
Esto lo escribo para que lo use quien quiera siempre bajo su propia responsabilidad, no es complicado.
Una vez actualizado de rom Indonesia Miui 11 Android 9 a Android 10 e instalado un recovery de forma incorrecta y he vuelto a
bloquear mi Redmi Note 8 Pro (Begoña) y esta vez no he esperado a que se agote la batería como en la anterior (post #196)
sino que he usado el método del Test Point.
Esto es lo he hecho:
-Copiado la carpeta de la rom de Indonesia V10.4.2.0, una vez descomprimido el zip, en Equipo > C
-Instalado SP Flash Tool v5. 1924 Win también en C
-Desmontado la trasera del móvil y quitado la carcasa que hay por arriba de la batería (Foto 1).
-Preparado un trozo de cable fino de cobre, un estremo lo he conectado a un tornillo en la placa del móvil haciendo masa(Foto 2)
y al otro extremo le he conectado un clavo (Foto 4).luego he abierto el Flash Tool y he puesto el scatter que
hay en la carpeta "images" de la rom que que había copiado en C, y el DA y archivo de autentificación que hay en la propia
carpeta del Flash Tool y he conectado el cable usb al móvil, solo al móvil.
-He pulsado "Download Only" y he conectado el otro extremo del cable de cobre, preparado con un clavo, en el
punto Kcol0 (Foto 3) y he conectado el cable usb al ordenador. La barra de abajo del FlashTool ha empezado a rellenarse en
color rojo primero y luego cambia de color hasta que aparece el simbolo "Download Ok"
Lo he hecho con la batería desconectada (otros dicen que conectada) y con todo los archivos marcados en el
Flash Tool (otros dicen que sólo hay que marcar el preolader) y me ha funcionado.
Después de unos minutos se ha iniciado el móvil con MIUI 10 y Android 9, como era de esperar por la rom con la que lo he hecho y luego ya le he instalado
MIUI 11 y después he actualizado a Android 10, los dos con MiFlash20191206 de Xiaomi. Para terminar instalando el recovery
apropiado, esta vez sí, y haciendo root
javizeta said:
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
The first time it crashed I revived it waiting for the battery to drain (post # 196) and now I have it back
to briquet when flashing wrong twrp and I have not waited for it to be exhausted again but I have done it
with a test point.
In photos two and three I show you where you have to connect the cable and privately I send you a link to an explanatory video
because I don't know if I can put links to youtube here.
It worked perfectly for me on the first try.
Click to expand...
Click to collapse
hey how to do me a favor pass the tutorial because I have the same problem:fingers-crossed:
maikiller said:
hey how to do me a favor pass the tutorial because I have the same problem:fingers-crossed:
Click to expand...
Click to collapse
I used the google search engine: tutorial to unbrick Chinese MTK phone and in the results I chose the Azlan Laion video.
Utilicé el buscador de google: tutorial desbrickear telefono MTK chino y en los resultados elegí el video de Azlan Laion.
Updated post # 2
Read please
Actualizado post #2
Leer, por favor
I definitely would appreciate anything that would get this flash to go through... I already have mine apart and have been trying everything to get it unbricked with no success as of yet...
Sent from my Redmi Note 8 Pro using XDA-Developers Legacy app
javizeta said:
I am writing this for anyone to use at their own risk, it is not complicated.
Once updated from Indonesia Miui 11 Android 9 rom to Android 10 and installed a recovery incorrectly and I have returned to
lock my Redmi Note 8 Pro (Begoña) and this time I have not waited for the battery to drain as in the previous one (post # 196)
I have used the Test Point method.
This is what I have done:
-Copied the folder from the Indonesian rom V10.4.2.0, once the zip is unzipped, in Computer> C
-Installed SP Flash Tool v5. 1924 Win also in C
-Removed the back of the mobile and removed the housing that is above the battery (Photo 1).
-Prepared a piece of fine copper wire, I have connected one end to a screw on the mobile plate making ground (Photo 2) and to
the other end I have connected a nail (Photo 4) .Then I have opened the Flash Tool and I have put the scatter that
*it is in the "images" folder of the rom that I had copied in C, and the DA and the authentication file that is in it
*Flash Tool folder and I have connected the usb cable to the mobile, only to the mobile.
-I pressed "Download Only" and connected the other end of the copper cable, prepared with a nail, in the
*point Kcol0 (Photo 3) and I have connected the usb cable to the computer. The bottom bar of the FlashTool has started to fill in
*color red first and then change color until the "Download Ok" symbol appears
*I have done it with the battery disconnected (others say it is connected) and with all the files marked on the
*Flash Tool (others say that you only have to mark the preolader) and it has worked for me.
*
After a few minutes the mobile has started with MIUI 10 and Android 9, as expected by the rom with which I have done it and
then I have already installed MIUI 11 and then I have updated to Android 10, both with MiFlash20191206 of Xiaomi. To finish
installing the appropriate recovery, this time yes, and doing root
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
Esto lo escribo para que lo use quien quiera siempre bajo su propia responsabilidad, no es complicado.
Una vez actualizado de rom Indonesia Miui 11 Android 9 a Android 10 e instalado un recovery de forma incorrecta y he vuelto a
bloquear mi Redmi Note 8 Pro (Begoña) y esta vez no he esperado a que se agote la batería como en la anterior (post #196)
sino que he usado el método del Test Point.
Esto es lo he hecho:
-Copiado la carpeta de la rom de Indonesia V10.4.2.0, una vez descomprimido el zip, en Equipo > C
-Instalado SP Flash Tool v5. 1924 Win también en C
-Desmontado la trasera del móvil y quitado la carcasa que hay por arriba de la batería (Foto 1).
-Preparado un trozo de cable fino de cobre, un estremo lo he conectado a un tornillo en la placa del móvil haciendo masa(Foto 2)
y al otro extremo le he conectado un clavo (Foto 4).luego he abierto el Flash Tool y he puesto el scatter que
hay en la carpeta "images" de la rom que que había copiado en C, y el DA y archivo de autentificación que hay en la propia
carpeta del Flash Tool y he conectado el cable usb al móvil, solo al móvil.
-He pulsado "Download Only" y he conectado el otro extremo del cable de cobre, preparado con un clavo, en el
punto Kcol0 (Foto 3) y he conectado el cable usb al ordenador. La barra de abajo del FlashTool ha empezado a rellenarse en
color rojo primero y luego cambia de color hasta que aparece el simbolo "Download Ok"
Lo he hecho con la batería desconectada (otros dicen que conectada) y con todo los archivos marcados en el
Flash Tool (otros dicen que sólo hay que marcar el preolader) y me ha funcionado.
Después de unos minutos se ha iniciado el móvil con MIUI 10 y Android 9, como era de esperar por la rom con la que lo he hecho y luego ya le he instalado
MIUI 11 y después he actualizado a Android 10, los dos con MiFlash20191206 de Xiaomi. Para terminar instalando el recovery
apropiado, esta vez sí, y haciendo root
Click to expand...
Click to collapse
----------
Your method does not work because it depends on the motherboard you are using, for example the Mediatek uses another type of test point and they are blocked, I think that is why Xiaomi does not want to give more support to the Xiaomi Redmi Note 8 Pro (Begonia) as devices!
I have tried it several times and it does not work, the only thing is a working method is: Having the volume up pressed until the Mode Flash mode is activated and with the SP Flash Tool. The problem is that it asks for an Authorized Account and it is what I am looking for (of course to payment)
The Procedure
0. Unzip your device's firmware.
1. Install MiFlashPro.
2. Navigate to (installation_directory)/MiFlashPro/SP_Flash_Tool/mi and run "account_auth.exe" (Run as administrator). In the window that opens, log in with an authorized Xiaomi Account.
3. Navigate to (installation_directory)/MiFlashPro/SP_Flash_Tool nad run "flash_tool.exe". The SP_Flash_Tool interface opens. Now you have to select the 3 files:
Download-Agent: (installation_directory)/MiFlashPro/SP_Flash_Tool/MTK_AllInOne_DA_mt6765_mt6785.bin
Scatter-loading File: You will find this one on your stock rom folder, especially on the folder called "images".
Authentication File: (installation_directory)/MiFlashPro/SP_Flash_Tool/auth_sv5.auth
4. Press the "Download" button.
5. Connect the USB cable to your PC but NOT YET to your phone.
6. Hold the vol+ button on your phone pressed and NOW connect the cable to it.
7. The program should now react and start the flashing process without giving an error.
8. Wait for the flashing process to end and enjoy!
javizeta said:
I am writing this for anyone to use at their own risk, it is not complicated.
Once updated from Indonesia Miui 11 Android 9 rom to Android 10 and installed a recovery incorrectly and I have returned to
lock my Redmi Note 8 Pro (Begoña) and this time I have not waited for the battery to drain as in the previous one (post # 196)
I have used the Test Point method.
This is what I have done:
-Copied the folder from the Indonesian rom V10.4.2.0, once the zip is unzipped, in Computer> C
-Installed SP Flash Tool v5. 1924 Win also in C
-Removed the back of the mobile and removed the housing that is above the battery (Photo 1).
-Prepared a piece of fine copper wire, I have connected one end to a screw on the mobile plate making ground (Photo 2) and to
the other end I have connected a nail (Photo 4) .Then I have opened the Flash Tool and I have put the scatter that
*it is in the "images" folder of the rom that I had copied in C, and the DA and the authentication file that is in it
*Flash Tool folder and I have connected the usb cable to the mobile, only to the mobile.
-I pressed "Download Only" and connected the other end of the copper cable, prepared with a nail, in the
*point Kcol0 (Photo 3) and I have connected the usb cable to the computer. The bottom bar of the FlashTool has started to fill in
*color red first and then change color until the "Download Ok" symbol appears
*I have done it with the battery disconnected (others say it is connected) and with all the files marked on the
*Flash Tool (others say that you only have to mark the preolader) and it has worked for me.
*
After a few minutes the mobile has started with MIUI 10 and Android 9, as expected by the rom with which I have done it and
then I have already installed MIUI 11 and then I have updated to Android 10, both with MiFlash20191206 of Xiaomi. To finish
installing the appropriate recovery, this time yes, and doing root
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
Esto lo escribo para que lo use quien quiera siempre bajo su propia responsabilidad, no es complicado.
Una vez actualizado de rom Indonesia Miui 11 Android 9 a Android 10 e instalado un recovery de forma incorrecta y he vuelto a
bloquear mi Redmi Note 8 Pro (Begoña) y esta vez no he esperado a que se agote la batería como en la anterior (post #196)
sino que he usado el método del Test Point.
Esto es lo he hecho:
-Copiado la carpeta de la rom de Indonesia V10.4.2.0, una vez descomprimido el zip, en Equipo > C
-Instalado SP Flash Tool v5. 1924 Win también en C
-Desmontado la trasera del móvil y quitado la carcasa que hay por arriba de la batería (Foto 1).
-Preparado un trozo de cable fino de cobre, un estremo lo he conectado a un tornillo en la placa del móvil haciendo masa(Foto 2)
y al otro extremo le he conectado un clavo (Foto 4).luego he abierto el Flash Tool y he puesto el scatter que
hay en la carpeta "images" de la rom que que había copiado en C, y el DA y archivo de autentificación que hay en la propia
carpeta del Flash Tool y he conectado el cable usb al móvil, solo al móvil.
-He pulsado "Download Only" y he conectado el otro extremo del cable de cobre, preparado con un clavo, en el
punto Kcol0 (Foto 3) y he conectado el cable usb al ordenador. La barra de abajo del FlashTool ha empezado a rellenarse en
color rojo primero y luego cambia de color hasta que aparece el simbolo "Download Ok"
Lo he hecho con la batería desconectada (otros dicen que conectada) y con todo los archivos marcados en el
Flash Tool (otros dicen que sólo hay que marcar el preolader) y me ha funcionado.
Después de unos minutos se ha iniciado el móvil con MIUI 10 y Android 9, como era de esperar por la rom con la que lo he hecho y luego ya le he instalado
MIUI 11 y después he actualizado a Android 10, los dos con MiFlash20191206 de Xiaomi. Para terminar instalando el recovery
apropiado, esta vez sí, y haciendo root
Click to expand...
Click to collapse
excuse me , could u wirte in english on these pictures , i can not read ur Lang, please,:highfive::highfive: please
gadmei.tw said:
excuse me , could u wirte in english on these pictures , i can not read ur Lang, please,:highfive::highfive: please
Click to expand...
Click to collapse
These are the texts included in the photos translated into English using the google translator
Photo 2: It is to this screw that I have attached one end of the cable
Photo 3: Upper label: To this round contact you have to connect the other end of the cable
Bottom epigraph: It is just above the battery connector. Battery disconnected.
javizeta said:
These are the texts included in the photos translated into English using the google translator
Photo 2: It is to this screw that I have attached one end of the cable
Photo 3: Upper label: To this round contact you have to connect the other end of the cable
Bottom epigraph: It is just above the battery connector. Battery disconnected.
Click to expand...
Click to collapse
thank u!
i will try through these point
need video please/necesito el video por favor
hi budy, how could you send me the video?, i got the same problem with my redmi note 8 pro
Hola amigo, espero que te encuentres bien, ¿Como podrías enviarme el video?, tengo el mismo problema con mi redmi note 8 pro, se apagó y no ha encendido
leandro iván said:
hi budy, how could you send me the video?, i got the same problem with my redmi note 8 pro
Hola amigo, espero que te encuentres bien, ¿Como podrías enviarme el video?, tengo el mismo problema con mi redmi note 8 pro, se apagó y no ha encendido
Click to expand...
Click to collapse
What video are you referring to?
Related
Hi first of all sorry for my English, I speak Spanish and use the google translator. Thanks.
Well, as the title says, my PDA does not run.
XDAndroid was running, was discharged and went out. Did not catch more.
I put a load, did not catch, I thought (Very downloaded) and I left an hour later I returned and was completely cold, I try to ignite anything (scared me).
After many attempts, definitely not given the desire to light. (I panicked thinking that the processor was so cold that I found the phone after 1 hour charge.)
I got home and I kept fighting (disappointed) and Bang! Lit!, left the HTC logo, then the boot HTC Sonidito and boom again, went off!.
I am excited and I kept giving and re-turn, removed the magazine and came to the screen that says "windows" and left the 4 balls of "hourglass" of multiple colors and said: He lit!, but he gave warning super battery low (just rang) and went out.
At this point I do not think (and I do not want most of all) that may be the processor, I guess you have to "process"to get there.
The PC no longer recognizes that "USB Composite Device" is not to do, I despair!
Thanks in advance!.
Click to expand...
Click to collapse
In Spanish:
Bueno, como dice el titulo, mi PDA no prende.
Estaba corriendo XDAndroid, se descargó y se apagó. No prendió más.
Lo puse a cargar, no prendió, pensé (Muy descargado) y lo dejé, una hora después regresé y estaba totalmente frío, lo intente prender y nada (me asusté).
Luego de muchos intentos, Definitivamente, no se le dió la gana de prender. (Me aterré pensando que fuera el procesador por lo frío que encontré el teléfono luego de 1 hora de carga.)
Llegué a casa y seguí luchando (decepcionadamente) y Pum! Prendió!, salió el logo de HTC, luego el sonidito de HTC de arranque y pum de nuevo, se apagó!.
Me he emocionado y seguí dandole y volvió a prender, quité el cargador y llegó a la pantalla que dice "windows" y salieron las 4 bolitas de "reloj de arena" de multiples colores y dije: Prendió!!, pero no, dió alerta de batería super baja (solo sonó) y se apagó.
A esas alturas no creo (y no quiero mas que todo) que pueda ser el procesador, supongo hay que "procesar" para llegar hasta allá.
La PC no reconoce más que "Dispositivo compuesto USB", no se que hacer, me desespero !
Gracias de antemano!.
Click to expand...
Click to collapse
i think your battery is dead. try to replace the battery with a new one.
Intenta el reset estando conectado al cargador, si es la batería estando conectado debieras de poder arrancar sin problema de otra forma puede ser que ya no carga y seria la fuente.
recien compre un htc m9 y desboque bootloader y lo hice root, instale TWRP recovery y instale lineage 15 para probar
despues trate de instalar lineagen 14 y nada y probe con otras y todas me da error 7, ya probe TWRP diferentes verciones y nada
incluso he tratado de instalar la stock y no me deja hacer nada la RUU no inicia bien en windows(tengo windows 10) solo carga y llega a la parte de las politicas y ya
la unica que me funciono fue la lineagen 15 pero no sirve ni el audio ni la camara (asi lo tengo funcionando por ahora) tengo bootloader desbloqueado, TWRP 3.0.0.0, S-ON y algo raro en modo dawnload sale como esa vercion himaulatt
ya no se que hacer, solo quiero una rom que funcione estable o regresar a stock, ayuda por favor
English translation:
just bought an m9 htc and bootloader and I did it root, install TWRP recovery and install lineage 15 to test
then try to install lineagen 14 and nothing and try with others and all I get error 7, and probe TWRP different views and nothing
I have even tried to install the stock and it does not let me do anything the UUU does not start well in windows (I have windows 10) only loads and arrives at the part of the policies and already
the only one that worked was the line 15 but it does not work either the audio or the camera (so I have it running for now) I have bootloader unlocked, TWRP 3.0.0.0, S-ON and something weird in dawnload mode comes out as that himaulatt
I do not know what to do, I just want a rom that works stable or return to stock, help please
sethyael said:
just bought an m9 htc and bootloader and I did it root, install TWRP recovery and install lineage 15 to test
then try to install lineagen 14 and nothing and try with others and all I get error 7, and probe TWRP different views and nothing
I have even tried to install the stock and it does not let me do anything the UUU does not start well in windows (I have windows 10) only loads and arrives at the part of the policies and already
the only one that worked was the line 15 but it does not work either the audio or the camera (so I have it running for now) I have bootloader unlocked, TWRP 3.0.0.0, S-ON and something weird in dawnload mode comes out as that himaulatt
I do not know what to do, I just want a rom that works stable or return to stock, help please
Click to expand...
Click to collapse
In download mode find the main os version and take note of the file name it is asking for at the bottom of the screen. Make a note for later.
Google for and download the corresponding firmware ruu in zip format and DOUBLE CHECK THE MD5 MATCHES THE ORIGINAL WHERE YOU GOT IT FROM!!.
Rename the zip to what it was asking for at the bottom of the screen in download mode and copy it to a micro sd card. MAKE SURE YOY DOUBLE CHECK THE MD5 ON THE SD CARD TOO.
Put the micro sd card in the phone, connect a working charger and boot to download mode, it should prompt you to press vol+ to flash the stock firmware.
Wait a short while until the phone reboots completely.
If you have any errors and you're absolutely sure you have the correct ruu then your phone may have a fault.
Translated by Google
En el modo de descarga, encuentre la versión del sistema operativo principal y tome nota del nombre de archivo que está solicitando en la parte inferior de la pantalla. Haga una nota para más tarde.
Busque y descargue la ruu de firmware correspondiente en formato zip y DOBLE CHEQUEE EL MD5 COINCIDE CON EL ORIGINAL DE DONDE LO OBTENIÓ !!.
Cambie el nombre del archivo zip a lo que estaba pidiendo en la parte inferior de la pantalla en modo de descarga y cópielo en una tarjeta micro sd. ASEGÚRESE DE QUE DOBLE REVISE EL MD5 EN LA TARJETA SD TAMBIÉN.
Coloque la tarjeta micro sd en el teléfono, conecte un cargador que funcione e inicie para descargar, le pedirá que presione vol + para actualizar el firmware.
Espere un momento hasta que el teléfono se reinicie por completo.
Si tiene algún error y está absolutamente seguro de que tiene la ruu correcta, entonces su teléfono puede tener un error.
Traducido por Google
gracias me funciono prefecto, enserio salvaste mi htc :good: you are the best
sethyael said:
recien compre un htc m9 y desboque bootloader y lo hice root, instale TWRP recovery y instale lineage 15 para probar
despues trate de instalar lineagen 14 y nada y probe con otras y todas me da error 7, ya probe TWRP diferentes verciones y nada
incluso he tratado de instalar la stock y no me deja hacer nada la RUU no inicia bien en windows(tengo windows 10) solo carga y llega a la parte de las politicas y ya
la unica que me funciono fue la lineagen 15 pero no sirve ni el audio ni la camara (asi lo tengo funcionando por ahora) tengo bootloader desbloqueado, TWRP 3.0.0.0, S-ON y algo raro en modo dawnload sale como esa vercion himaulatt
ya no se que hacer, solo quiero una rom que funcione estable o regresar a stock, ayuda por favor
English translation:
just bought an m9 htc and bootloader and I did it root, install TWRP recovery and install lineage 15 to test
then try to install lineagen 14 and nothing and try with others and all I get error 7, and probe TWRP different views and nothing
I have even tried to install the stock and it does not let me do anything the UUU does not start well in windows (I have windows 10) only loads and arrives at the part of the policies and already
the only one that worked was the line 15 but it does not work either the audio or the camera (so I have it running for now) I have bootloader unlocked, TWRP 3.0.0.0, S-ON and something weird in dawnload mode comes out as that himaulatt
I do not know what to do, I just want a rom that works stable or return to stock, help please
Click to expand...
Click to collapse
Per the forum rules:
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
Por las reglas del foro:
4. Usa el idioma inglés.
Entendemos que con todas las diferentes nacionalidades, no todos hablan inglés bien, pero intenten. Si realmente no puede publicar en inglés, use un traductor en línea. Puede incluir su mensaje original en su propio idioma, debajo de la traducción al inglés. (Esta regla cubre sus publicaciones, entradas de perfil y firma).
Cheers,
Magnum_Enforcer
FSM
Hi Guys,
so the EMUI 9 (Pie) update is now rolling out and is telling me to update (OTA)..
currently rooted (magisk) and has twrp installed..
flashed back stock recovery but the OTA did not continue..
am I missing other steps? do I need to uninstall magisk and unroot?
Device = PAR-LX9
P.S. > OTA patch updates before in EMUI 8 continue despite having twrp and magisk installed
(after OTA it just removes root and twrp so I'll just flash them back; but it's not the case now with EMUI 8.2 to 9)
anybody who experiences more or less the same?
thanks
did you pay to get ur BL unlocked>?
HuRUpdater works
I did. HuRUpdater works except when including recovery.img (the phone reports an error with Volume up + Power)
I'll try to flash TWRP via fastboot; The partitions are still the same right? recovery_ramdisk?
Update
Ok, I was able to flash TWRP via fastboot...
(Note: Bootloader should be unlocked)
this guide in the P20 Pro forums works:
forum.xda-developers.com/huawei-p20-pro/how-to/guide-manual-update-p20-pro-hurupdater-t3816283
BUT
do not include twrp renamed to recovery.img (or any image for that matter).. for some reason the phone says it's invalid data when you try to reboot to TWRP when including it in HuRUpdater
to be safe just include update.zip , update_all_hw.zip and update_data_public.zip in HuRUpdater
after the procedure in the P20 forum.. reboot just to check if the firmware is installed.. ***you will lose root and TWRP***
then, reboot to fastboot and flash TWRP as usual..
then you can proceed with rooting (I didn't root for now..)
Cheers,
hi
i have PAR-LX9 and no have update yet to emui 9, need wait a little more.
looking in app finder but recently update.zip, etc was removed from server
PD: am from mexico, huawei nova 3 PAR-LX9/L09 same equal but no have idea we can root this device.
Hola soy del país de México .... También tengo EL HUAWEI NOVA 3 PAR-LX3
Quisiera a alguien de su ayuda... ¡
Por lo menos alguna forma de mandar a pedir los números para desbloquear el bootloader de mi HUAWEI NOVA 3 PAR-LX3... Ya que he buscado páginas desde el año pasado cuando cerró China para lo del código y hasta el día de hoy... No he podido encontrar la forma de obtener...
Alguien que ya aya podido tener el código... O me de algúna liga yo se lo agradeceré mucho... Mi cuestión es la siguiente borre sin querer toda la información de la memoria interna al conectarlo a una lap de hermano y por copiar una película se mando arriba en una notificación en proceso limpieza del teléfono del máster y lo cancele y apague por no habia forma de detenerlo y al iniciarlo ya había perdido todo.
El cual busque en Internet y por días programas paga recuperar pero la mayoría usa acceso root y no lo soy descargue el DR FONE y no me sirve intenta rutearlo primero y luego me dice que tuvo exito
Pido al alguien me apoyo por favor...
EmmanuelVA said:
Quisiera a alguien de su ayuda... ¡
Por lo menos alguna forma de mandar a pedir los números para desbloquear el bootloader de mi HUAWEI NOVA 3 PAR-LX3... Ya que he buscado páginas desde el año pasado cuando cerró China para lo del código y hasta el día de hoy... No he podido encontrar la forma de obtener...
Alguien que ya aya podido tener el código... O me de algúna liga yo se lo agradeceré mucho... Mi cuestión es la siguiente borre sin querer toda la información de la memoria interna al conectarlo a una lap de hermano y por copiar una película se mando arriba en una notificación en proceso limpieza del teléfono del máster y lo cancele y apague por no habia forma de detenerlo y al iniciarlo ya había perdido todo.
El cual busque en Internet y por días programas paga recuperar pero la mayoría usa acceso root y no lo soy descargue el DR FONE y no me sirve intenta rutearlo primero y luego me dice que tuvo exito
Pido al alguien me apoyo por favor...
Click to expand...
Click to collapse
hey, ¿pudiste desbloquearlo de alguna manera?
SPANISH VERSION
Hola gente, tengo ese problema hace rato, la mayor recomendacion que recibi fue la de recuperar el celu con la caja z3x para usar el software de Medusa Pro, pero me dieron otra solucion el cual no encuentro la rom de dicho celular para flashearlo con SP Flash Tools, si alguno me podria pasar el *scatter file* del celular se lo agradeceria, yo me encargo de desarmar la rom para poder instalarlo despues, quiero ver si funciona con eso, sino si voy a llevarlo a un tecnico!! Gracias!!
El scatter file se obtiene de alguno que tenga el mismo modelo de celular con misma ROM (16GB) y esté rooteado!! con el software Mtk_Droid_Tool_v2.5.3
Link: Buscan en google "Mtk_Droid_Tool_v2.5.3" y abren el primer link que les aparece!! (no puedo puedo publicar el link por ser nuevo en los foros)
ENGLISH VERSION
Hello people, I have that problem for a while, the biggest recommendation I received was to recover the cell phone with the z3x box to use the Medusa Pro software, but they gave me another solution which I can not find the rom of that cell to flash it with SP Flash Tools, if any I could pass the * scatter file * cell phone would appreciate it, I will disarm the rom to install it later, I want to see if it works with that, if I'm going to take it to a technician !! Thank you!!
The scatter file is obtained from one that has the same cell phone model with the same ROM (16GB) and is rooted !! with the software Mtk_Droid_Tool_v2.5.3
Link: Search "Mtk_Droid_Tool_v2.5.3" in Google and the first link that appears
(I can not post the link because it's new in the forums)
Good morning everyone, I need help with my one plus 5, I am in version 5.1.7, 8.1, from there I have tried by all means, twrp, adb, side load, dirty load, flashing by MsmDownloadTool, to update to android 9.0 or higher, but when the updates finish successfully, the phone starts with the screen on but does not give any image, nor by restarting the screen it loads, it looks illuminated, but nothing else, I think the solution may be in the Information from the Treble Info application that I downloaded and says: 1- Treble and VNDK, your device supports the legacy version of the Treble project using VNDK version 27.0
2- System as Root, Your device does not support System as Root. Use an A-only operating system.
3- Architecture, Your device is ARM64.
4- Background updates, Background updates are not supported. Your device must go into recovery mode to install updates, and there is a high risk of failure compared to devices that support background updates.
What happens is that the previous information is not interpreted to be able to carry out the updates correctly following these parameters, I ask you to please give me a cable step by step to be able to update, thank you very much and excuse me throughout this consultation.
Buenos días a todos, necesito una ayuda con mi one plus 5, estoy en la versión 5.1.7, 8.1, desde allí he intentado por todos los medios, twrp, adb, carga lateral, carga en sucio, flasheando por MsmDownloadTool, para actualizar a android 9.0 o superior, pero cuando las actualizaciones terminan exitosamente, el celular se inicia con la pantalla encendida pero no da ninguna imagen, ni reiniciando la pantalla se carga, se ve iluminada, pero nada más, pienso que la solución puede estar en la información de la aplicación Treble Info que descargué y dice: 1- Treble y VNDK, tu dispositivo soporta la versión de legado del proyecto Treble usando VNDK versión 27.0
2- Sistema como Root, Tu dispositivo no soporta Sistema como Root. Usa un sistema operativo A-only.
3- Arquitectura, Tu dispositivo es ARM64.
4- Actualizaciones en segundo plano, Las actualizaciones en segundo plano no están soportadas. Tu dispositivo debe entrar en el modo de recuperación para instalar actualizaciones y hay un riesgo elevado de fallos, comparado con los dispositivos que soportan las actualizaciones en segundo plano.
Lo que pasa es que no se interpretar la anterior información para poder realizar las actualizaciones correctamente siguiendo estos parámetros, les pido por favor me echen un cable paso a paso para poder actualizar, muchas gracias y disculpen lo largo de esta consulta.