Related
Hello all
Rsd Lite can't detect my motorola (tried with 4.7 and 4.9 with the moto drivers)
I've already installed the root and 2nd init 2.51 (newest one)
When booting to clockworkmod recovery v2.5.1.8 if I try to flash from zip it says E: can't mount /sdcard and if rsd lite is not working.. how can I get to flash custom roms? what's the solution? due to the fact that I cant flash rsd lite I wasn't able to do the step flash on the guide, thats why it doesn't recognise my sdcard in clockworkmod?
thank you
mariosanoguera said:
Hello all
Rsd Lite can't detect my motorola (tried with 4.7 and 4.9 with the moto drivers)
I've already installed the root and 2nd init 2.51 (newest one)
When booting to clockworkmod recovery v2.5.1.8 if I try to flash from zip it says E: can't mount /sdcard and if rsd lite is not working.. how can I get to flash custom roms? what's the solution? due to the fact that I cant flash rsd lite I wasn't able to do the step flash on the guide, thats why it doesn't recognise my sdcard in clockworkmod?
thank you
Click to expand...
Click to collapse
Que raro, xq si rsdlite te lo detecto una vez ya te lo detecta siempre... alguna vez usaste rsdlite antes de que tu defy te quede asi?'
anda! jeje pues si es raro si solo me lo detecto una vez (estaba en la pantalla de inicio) y no me dejaba darle al boton "start" lei por ahi que tiene que estar en boot mode o algo asi, como tengo que dejar el movil para que pueda hacer el flasheo? en el bootloader? alomejor es la razon por la que no me lo detecta puedes darme instrucciones paso por paso? gracias agregame al msn [email protected] y charramos jeje
sorry for the spanish, Its wierd 'cause when it was detected the status said "connected" and it was in the "desktop" of android (couldn't click the button start), I've read around there that it has to be in boot mode to do the flash but I have no idea what is that boot mode (I've tried in bootloader option but it doesnt detect it)
can someone give me any tips or any guide that has been useful to you? thanks again
nuevas noticias soy idiota, para mi el boot mode era power + vol abajo cuando era power + vol arriba ahora si que me lo reconoze pero eligo el archivo y no me deja darle al boton "start" alguien sabe porque?
new news I was doing the boot mode wrong, instead of power + up down I was doing power + vol down, rsd lite recognise my moto device but.... after selecting the file I can't press the "start" button anyone knows why?
problem solved, "thx" xd
the issue was that the file to flash from cm7 didn't let me, I've tried with the froyo Europe Orange deblurred and it worked.
RSD Lite Not detecting
I am having the same problem. I have installed RSD Lite and I have a AT&T Motorola flipside (Eclair). I am attempting to install SPRecovery because I want to upgrade to Froyo.
I was able to install RSD Lite 4.5 and it detected my phone, but the sync failed. I found an article that said the flipside required version 4.9 of RSD Lite. I upgraded RSD lite and now it doesn't detect. I have updated the most updated drivers from Motorola (I know this, because I have the ADB dev kit and can connect to my device via the command line - which is how I rooted my phone).
Any thoughts?
Sorry... Additional note: I updated the pst_flash.ini and tried changing the device detection settings, but both of those options failed as well.
Read carefully please!
Froyo and Windows users only at this moment, very busy this days, will make it work with linux and mac os!:
For those who flashed the SBF file with RSD Lite.
Im just trying to make it all easier.
Click to expand...
Click to collapse
You dont need adb installed on your PC!
TIPs: pass MOTOBLUR SETUP.
When you are on the begining of motoblur setup after you flashed your phone, (long press menu) to use the keyboard then type: eebluroff.
You must be done now!
Click to expand...
Click to collapse
Download the zip file and unzip it wherever you want.
Enable "USB debugging" on the phone before proceeding.
Settings -> Applications -> Development -> USB debugging.
1 - Connect your phone to PC (wait for your PC to install drivers) and click on "Install Gingerbreak & 2ndInitDefy".
Note: When commands window closes automatically, check if Gingerbreak and Defy 2init are installed on the phone (MOTOROLA SIDELOADER IS INSTALLED TOO to enable non-market apps), if they are everything is going fine.
2 - Unplug the phone from your PC.
3 - Open Gingerbreak installed on your phone and click on "Root device", (it will take a while) later your phone will reboot when completed.
4 - When your phone boots, go to 2ndinitDefy installed on your phone and download a recovery (try lastest version).
5 - Turn off the phone and turn it on, when you see the led light is blue press volume down button.
You are alredy into bootmenu ready to flash!
Click to expand...
Click to collapse
Donwload:
http://www.mediafire.com/?6kbt33kx64xg11e
I tested it on my PC but I need somebody else to test it, I have adb installed on my PC, need somebody who does not have it installed.
You wont need superoneclick anymore to root!
I will make a video later! I installed Ubuntu I will try it in linux to make this work for every OS and why not MAC OS!
josuearisty said:
Froyo users only:
For those who flashed the SBF file with RSD Lite.
Im just trying to make it all easier.
Testers needed
You dont need adb installed on your PC!
Download the file, unzip it wherever you want.
Remember to enable "USB debugging" before proceding.
Settings -> Applications -> Development -> USB debugging.
Then click on "Install Gingerbreak & 2ndInitDefy"
1 - Open Gingerbreak installed on your phone and click on "Root device", your phone will reboot when completed.
2 - Go to 2ndinitDefy installed on your phone and download a recovery (try lastest version).
Donwload:
http://www.mediafire.com/?6kbt33kx64xg11e
I tested it on my PC but I need somebody else to test it, I have adb installed on my PC, need somebody who does not have it installed.
You dont need superoneclick anymore to root!
Click to expand...
Click to collapse
Hola puedes poner las instrucciones en español y para que sirve ...perdon x mi ignoracia es
Es mejor Gingleblur q froyo cuales son las ventajas y las contras...saludos amigo....
Hi there,
May I know if there is a way to switch from CWM recovery to TWRP? I tried to simply flash the zip for TWRP but then my bravo won't start...
Thanks.
mataflakitas said:
Hola puedes poner las instrucciones en español y para que sirve ...perdon x mi ignoracia es
Es mejor Gingleblur q froyo cuales son las ventajas y las contras...saludos amigo....
Click to expand...
Click to collapse
Voy a hacer guias en español para cada thread que he creado
Esto es para si algo te ha salido mal y tu telefono no quiere iniciar quedandose solamente en el logo de moto y tienes que por desgracia FLASHEAR el SBF de Froyo con RSD LITE.
Entonces despues que estes en Froyo, podras seguir estos pasos y no tener que usar superoneclick, en mi opinion esto es mas facil.
Pruebalo cuando puedas!
brucezyc said:
Hi there,
May I know if there is a way to switch from CWM recovery to TWRP? I tried to simply flash the zip for TWRP but then my bravo won't start...
Thanks.
Click to expand...
Click to collapse
I try doing it too but no success, I think you should flash first a custom rom, then you will be able to flash touch recovery and it will for sure work.
I will let know about some test I make!
I'll be honest, I didn't try it, but it will work. That's really not a bad idea and would work with any phone Gingerbreak works on....You should release that in Android General.
I would use it, I'm just too lazy to flash an sbf and then set my phone back up again. I'm happy with my Bravo for the moment...and its my onlyl phone...That really is a simple, yet useful, solution.
gracias
josuearisty said:
Voy a hacer guias en español para cada thread que he creado
Esto es para si algo te ha salido mal y tu telefono no quiere iniciar quedandose solamente en el logo de moto y tienes que por desgracia FLASHEAR el SBF de Froyo con RSD LITE.
Entonces despues que estes en Froyo, podras seguir estos pasos y no tener que usar superoneclick, en mi opinion esto es mas facil.
Pruebalo cuando puedas!
I try doing it too but no success, I think you should flash first a custom rom, then you will be able to flash touch recovery and it will for sure work.
I will let know about some test I make!
Click to expand...
Click to collapse
Oooo muchas gracias amigo voy a probar que suerte q hablas español estoy aprendiendo muchas cosas contigo amigo josuearisty... saludos
oh no, i'm not unglug my phone after install Install Gingerbreak & 2ndInitDefy, then i click Gingerbreak to root
and now it's not on (, just have logo motorola
help me
now i'm ok, i wipe data, cache and do it again
but i dont click root on Gingerbreak , but on my phone still have superuser icon ? it success or not
i used superoneclick to root, but not success after i installed Gingerbreak & 2ndInitDefy
skeevy420 said:
I'll be honest, I didn't try it, but it will work. That's really not a bad idea and would work with any phone Gingerbreak works on....You should release that in Android General.
I would use it, I'm just too lazy to flash an sbf and then set my phone back up again. I'm happy with my Bravo for the moment...and its my onlyl phone...That really is a simple, yet useful, solution.
Click to expand...
Click to collapse
I think it is still not that simple, I will post some tips and be more specif.
mataflakitas said:
Oooo muchas gracias amigo voy a probar que suerte q hablas español estoy aprendiendo muchas cosas contigo amigo josuearisty... saludos
Click to expand...
Click to collapse
Siempre mi amigo, cualquier cosa estamos aqui.
kevins547 said:
oh no, i'm not unglug my phone after install Install Gingerbreak & 2ndInitDefy, then i click Gingerbreak to root
and now it's not on (, just have logo motorola
help me
now i'm ok, i wipe data, cache and do it again
but i dont click root on Gingerbreak , but on my phone still have superuser icon ? it success or not
i used superoneclick to root, but not success after i installed Gingerbreak & 2ndInitDefy
Click to expand...
Click to collapse
Maybe you did not follow steps as you should, I think I have to make steps easier to understand, so that noobs and advanced users can do it all.
Thanks for trying!
when unglug the phone from Pc, the box USB debugging is tick in or not ?
kevins547 said:
when unglug the phone from Pc, the box USB debugging is tick in or not ?
Click to expand...
Click to collapse
Of course it has to be enable.
Else it is not going to work.
gracias
josuearisty said:
Of course it has to be enable.
Else it is not going to work.
Click to expand...
Click to collapse
amigo podra subir un video para saber con mayor facilida como se hace y las instrucciones en español bueno tambien para ingles claro... creo que novatos como yo ...avemos muchos en este foro y estariamos muy agradecicdo con usted amigo josuearisty ...
oye amigo otra duda que pasa si mi pc tiene adb instalado.... puede ocacionar un error en mi motorola bravo ...?
otra duda por que cuando baje su archivo mi pc me lo detecto como un virus...
mataflakitas said:
amigo podra subir un video para saber con mayor facilida como se hace y las instrucciones en español bueno tambien para ingles claro... creo que novatos como yo ...avemos muchos en este foro y estariamos muy agradecicdo con usted amigo josuearisty ...
oye amigo otra duda que pasa si mi pc tiene adb instalado.... puede ocacionar un error en mi motorola bravo ...?
otra duda por que cuando baje su archivo mi pc me lo detecto como un virus...
Click to expand...
Click to collapse
Esta semana estare algo ocupado, el video creo que lo hare la semana que viene.
Usar el adb del archivo no te va a ocasionar ningun problema, ni a tu telefono ni a la computadora.
La aplicacion gingerbreak tiene un exploit dentro y los antivirus lo identifican como un virus, solo desactivalo si lo vas a usar.
--------------------------------------------------------
If you have adb installed on your pc, using this one will cause no problem to the phone or your pc.
Your antivirus detects gingerbreak as a virus because of an exploit command inside the apk file, you can deactivate your antivirus and use it with no problem, no risk with it.
I'll add, s1c/rage against the cage/gingerbreak all show up as viruses because they are. Not kill you PC virus, but virus none the less. Technically they're exploits, but still get picked up by scanners.
Gonna need some testers for LINUX and MAC, when its ready I will you know people!
Working great!. Will flash a Rom right now . Thnx to make our life easier!.
Took a few flashes, but I got there in the end! Great stuff, thanks!!
Worked like a charm. Thanks!!
Anyone, how to change our boot logo not boot animation? My p6 is from is locked from a local network here in the Philippines and I manage to find a person on ebay that can network unlock so it is unlocked now. Now I want to change the boot logo. I used MIUI rom now. TIA
vncrlsoriano said:
Anyone, how to change our boot logo not boot animation? My p6 is from is locked from a local network here in the Philippines and I manage to find a person on ebay that can network unlock so it is unlocked now. Now I want to change the boot logo. I used MIUI rom now. TIA
Click to expand...
Click to collapse
You may change boot logo only if you will change a location of your phone. replaced oeminfo on fastboot.
I may help you.
Sorry for my bad English...
there is boot animation app in google play ..
SVikFromOrel said:
You may change boot logo only if you will change a location of your phone. replaced oeminfo on fastboot.
I may help you.
Sorry for my bad English...
Click to expand...
Click to collapse
Can you teach me how? I am using MIUI v5 rom and its b116sp01.
TIA!
GalaxySIIII said:
there is boot animation app in google play ..
Click to expand...
Click to collapse
Yeah I tried that but the OEM logo wont change. just boot animation.
vncrlsoriano said:
Can you teach me how? I am using MIUI v5 rom and its b116sp01.
TIA!
Click to expand...
Click to collapse
Go to \data folder with Root Explorer and find custom.bin file, open it by text and write me containt this file.
Attantion!! After change location your phone will have wiped all your data
SVikFromOrel said:
Go to \data folder with Root Explorer and find custom.bin file, open it by text and write me containt this file.
Attantion!! After change location your phone will have wiped all your data
Click to expand...
Click to collapse
can find custom.bin. sorry bout that. Is there a way to have an update.zip file just to flash it or install from sd card using cm recovery? I really want the huawei ascend stock boot logo. Thanks again.
vncrlsoriano said:
can find custom.bin. sorry bout that. Is there a way to have an update.zip file just to flash it or install from sd card using cm recovery? I really want the huawei ascend stock boot logo. Thanks again.
Click to expand...
Click to collapse
Download attached file. unzip and put update.app file in to DLOAD folder in your external SD Card.
back up your data.
hold the volume button up + down + power button.
After flashing go to stock recovery (not CWM) and do Wipe data and Wipe cache.
View attachment Vendor+channel_neeurope.rar
vncrlsoriano said:
Anyone, how to change our boot logo not boot animation? My p6 is from is locked from a local network here in the Philippines and I manage to find a person on ebay that can network unlock so it is unlocked now. Now I want to change the boot logo. I used MIUI rom now. TIA
Click to expand...
Click to collapse
The bootlogo can be changed but u need a rooted device, here are the steps:
1. Root your device
2. Install rootbrowser from the playstore
3. Start rootbrowser and navigate to "data" than locate "custom.bin"
4. Inside "custom.bin" there will be a line of text in my "dt/mk", which shows the default cust profile
5. Now go back from the "folder" and locate "cust" and inside locate the folder which was specified in "custom.bin"
6. Two levels inside that folder there will be a "boot" folder, inside it will be the boot animation
7. Just delete the boot animation file and add your custom one
8. Do a Factory reset
SVikFromOrel said:
Download attached file. unzip and put update.app file in to DLOAD folder in your external SD Card.
back up your data.
hold the volume button up + down + power button.
After flashing go to stock recovery (not CWM) and do Wipe data and Wipe cache.
View attachment 2341528
Click to expand...
Click to collapse
Ok I already did that but still Im getting the globe carrier boot logo. Is the attach file is just to see my custom.bin? or this is to changed the boot logo?
vncrlsoriano said:
Ok I already did that but still Im getting the globe carrier boot logo. Is the attach file is just to see my custom.bin? or this is to changed the boot logo?
Click to expand...
Click to collapse
This attach file change your location in file custom.bin, but after wipes will be changed your bootlogo too.
This patch only for P6-U06.
---------- Post added at 06:19 PM ---------- Previous post was at 06:12 PM ----------
btodorce said:
The bootlogo can be changed but u need a rooted device, here are the steps:
1. Root your device
2. Install rootbrowser from the playstore
3. Start rootbrowser and navigate to "data" than locate "custom.bin"
4. Inside "custom.bin" there will be a line of text in my "dt/mk", which shows the default cust profile
5. Now go back from the "folder" and locate "cust" and inside locate the folder which was specified in "custom.bin"
6. Two levels inside that folder there will be a "boot" folder, inside it will be the boot animation
7. Just delete the boot animation file and add your custom one
8. Do a Factory reset
Click to expand...
Click to collapse
boot animation is not boot logo. when you turn on your phone, at first you see boot logo, then go bootanimation.
Ok, I am doing a wipe data now using android recovery. note that I am using MIUI as rom. is it alright?
vncrlsoriano said:
Ok, I am doing a wipe data now using android recovery. note that I am using MIUI as rom. is it alright?
Click to expand...
Click to collapse
I don't know how it will be with MIUI... I do this only on official ROM.
ok .. bootanimation change is not problem .. now bootlogo - oemlogo ... I will try later the way I change my bootlogo on G300 - create oemlogo.zip and flash it in TWRP
I am also interested on chnging boot logo (not bootanimation, this one is easy) every time i turn on phone i see logo of my phone carrier and that sucks.
If someone achieve it please tell me how!
You need to do a debranding
ZuperStyler said:
You need to do a debranding
Click to expand...
Click to collapse
and how we can do that on P6? some tool?
same here on my huawei g526 L11.
vncrlsoriano said:
Ok I already did that but still Im getting the globe carrier boot logo. Is the attach file is just to see my custom.bin? or this is to changed the boot logo?
Click to expand...
Click to collapse
Still globe oem logo appears. but bootanimation has changed, no matter how hard I tried still cant delete globe logo
---------- Post added at 10:19 AM ---------- Previous post was at 10:14 AM ----------
hi we have same problemI want to delete or change my splash screen and want to change it to huawei logo, but sad thing no matter how I tried applied procedures from other site like modacco still globe is booting in my scree, I tried to flash oemlogo still no luck. I locate the cust.bin so it was stated there the folder of globe/ph bootanimation is changed not globe logo:crying:
Cambiar Boot logo con exito P6
Source: h t t p:// bbs. aijikong.com / thread-142774-1-1. html "Sin espacios"
Edit (DDanielGT)
Después de buscar y casi rendirme finalmente encontré en el foro chino con la solución para poner el logo inicial de Huawei en mi P6 , Espero les funcione a ustedes también.
Herramientas:
1, Root
2, Terminal Emulator (o similar)
3 Es File explore con permisos root (o similar pero que sea explorador con permisos root)
Pasos:
En file explore:
1, / cust / hw / / oemlogo.mbn, este documento es la primera pantalla de archivo nativo de Huawei, copiarlo y pegarlo en el folder de su operadora directorio normal: dispositvo / logo cust / su compañía / cn / logo
Por ejemplo, / cust / CMCC / cn / logo / (((adentro de la carpeta logo pegar el archivo oemlogo.mbn)))
2, y luego, con un editor de texto modificar /data/custom.bin, el interior del archivo agregar una letra más al final para cambiar la línea de texto.
Por ejemplo, el original es CMCC / cn, convirtiéndolo en CMCC / cnx, a continuación, guardar.
3 y, a continuación, iniciar HyperTerminal
Ingrese antes introduce su para obtener privilegios de root;
A continuación, introducir load_oemlogo (luego presionar enter), con esto se modificara el logo inicial por el de huawei.
Si no ha cambiado el custom.bin paso 2, al introducir load_oemlogo se ejecutara al instante y la sustitución no tendra exito .
Si al ingresar load_oemlogo funciona por un tiempo y pareciera el el terminal emulator no responde esperar hasta el final, y finalmente ejecutara el comando, lo que indica el éxito. pero continuar el paso 4 (si lo omiten se puede reiniciar de fabrica el teléfono y es molesto )
4, Repetir el paso dos quitando las letras adicionales que se colocaron y guardar nuevamente el archivo.
5, reinicie el teléfono
Este método me funciono y ahora ya tengo el logo original del ASCEND P6!!
Espero les funione.
DDanielGT said:
Source: h t t p:// bbs. aijikong.com / thread-142774-1-1. html "Sin espacios"
Edit (DDanielGT)
Después de buscar y casi rendirme finalmente encontré en el foro chino con la solución para poner el logo inicial de Huawei en mi P6 , Espero les funcione a ustedes también.
Herramientas:
1, Root
2, Terminal Emulator (o similar)
3 Es File explore con permisos root (o similar pero que sea explorador con permisos root)
Pasos:
En file explore:
1, / cust / hw / / oemlogo.mbn, este documento es la primera pantalla de archivo nativo de Huawei, copiarlo y pegarlo en el folder de su operadora directorio normal: dispositvo / logo cust / su compañía / cn / logo
Por ejemplo, / cust / CMCC / cn / logo / (((adentro de la carpeta logo pegar el archivo oemlogo.mbn)))
2, y luego, con un editor de texto modificar /data/custom.bin, el interior del archivo agregar una letra más al final para cambiar la línea de texto.
Por ejemplo, el original es CMCC / cn, convirtiéndolo en CMCC / cnx, a continuación, guardar.
3 y, a continuación, iniciar HyperTerminal
Ingrese antes introduce su para obtener privilegios de root;
A continuación, introducir load_oemlogo (luego presionar enter), con esto se modificara el logo inicial por el de huawei.
Si no ha cambiado el custom.bin paso 2, al introducir load_oemlogo se ejecutara al instante y la sustitución no tendra exito .
Si al ingresar load_oemlogo funciona por un tiempo y pareciera el el terminal emulator no responde esperar hasta el final, y finalmente ejecutara el comando, lo que indica el éxito. pero continuar el paso 4 (si lo omiten se puede reiniciar de fabrica el teléfono y es molesto )
4, Repetir el paso dos quitando las letras adicionales que se colocaron y guardar nuevamente el archivo.
5, reinicie el teléfono
Este método me funciono y ahora ya tengo el logo original del ASCEND P6!!
Espero les funione.
Click to expand...
Click to collapse
tks m8! for sharing, but would appreciate if anybody could translate it in understandable english as i tried on google translate and after translation it gets even harder to understand!
WBR
Hi, everyone
I have the galaxy a50 505g and I would like to know if it is possible to install TWRP by Termux, since I have tried to install it by Odin without positive result (the device restarts again and again and I can not get it into recovery mode) and also with the Magisk patch (to which I have my device rooted with this tool). I have also tried with ADB, however it does not recognize my device in download mode
If any of you can help me I would greatly appreciate it.
In advance, thank you all for reading.
Original text
Tengo el galaxy a50 505g y me gustaría saber si es posible instalar TWRP por Termux, ya que he instentado instalarlo por Odin sin resultado positivo ( el dispotitivo se reinicia una y otra vez y no logro hacer que entre a modo recovery) y también con el parche de Magisk (a que tengo mi dispositivo rooteado con esta herramienta). También lo he intentado con ADB, sin embargo no reconoce mi dispositivo en modo descarga
Si alguno de ustedes me puede ayudar se los agradecería mucho.
De antemano, gracias a todos por leer.
Nope, when the device is in download mode only Odin can detect it not ADB. Install it through Odin only
RandomAJL said:
Nope, when the device is in download mode only Odin can detect it not ADB. Install it through Odin only
Click to expand...
Click to collapse
Oh, OK. Thanks for your feedback.
I will have to keep trying
Guide to Rooting using a BOOT.IMG patched with Magisk.
ONLY WORKS WITH "MINIMAL ADB & FASTBOOT" - USING "PLATAFORM TOOLS" DOES NOT INSTALL.
It must be updated to the latest version "RTA31.68-25"
Turn off your phone. After power off, enter FASTBOOT mode, press volume + button and power button.
fastboot flash boot_a Boot_Root.img
Once it is done, type fastboot reboot and when it starts you will have to install magisk.apk.
(BOOT_ROOT.IMG FILE SHARED IN A TELEGRAM GROUP, AN ATTEMPTED TO PATCH THE BOOT.IMG FILE WITH THE MAGISK APPLICATION BUT DOES NOT BOOT. FOR NOW IT IS THE ONLY METHOD THAT WORKS.)
WE CONTINUE INVESTIGATING METHODS TO INSTALL GSI PERMANENTLY.
UNTIL NOW THE GSI ARE INSTALLED ONLY TEMPORARILY USING DSU.
_---------------------------
Guía para Rootear usando un BOOT.IMG parchado con Magisk.
SOLO FUNCIONA CON "MINIMAL ADB & FASTBOOT" - USANDO "PLATAFORM TOOLS" NO INSTALA.
Debe estar actualizado a la última versión "RTA31.68-25"
Apaga tu teléfono. Una vez apagado, ingrese al modo FASTBOOT, presione el botón de volumen + y el botón de encendido.
fastboot flash boot_a Boot_Root.img
Una vez que termine, escriba fastboot reboot y cuando comience, tendrá que instalar magisk.apk.
(ARCHIVO BOOT_ROOT.IMG COMPARTIDO EN UN GRUPO DE TELEGRAM, SE INTENTO PARCHAR EL ARCHIVO BOOT.IMG CON LA APLICACIÓN DE MAGISK PERO NO BOOTEA. POR AHORA ES EL ÚNICO MÉTODO QUE FUNCIONA.)
SEGUIMOS INVESTIGANDO MÉTODOS PARA INSTALAR GSI DE FORMA PERMANENTE.
HASTA AHORA LAS GSI SE INSTALAN SOLO TEMPORALMENTE USANDO DSU.
DOTOS 5.2 Y PIXEL EXPERIENCE A12 SUPER ESTABLES.
Grom9A said:
Guía para Rootear usando un BOOT.IMG parchado con Magisk.
SOLO FUNCIONA CON "MINIMAL ADB & FASTBOOT" - USANDO "PLATAFORM TOOLS" NO INSTALA.
Debe estar actualizado a la última versión "RTA31.68-25"
Apaga tu teléfono. Una vez apagado, ingrese al modo FASTBOOT, presione el botón de volumen + y el botón de encendido.
fastboot flash boot_a Boot_Root.img
Una vez que termine, escriba fastboot reboot y cuando comience, tendrá que instalar magisk.apk.
(ARCHIVO BOOT_ROOT.IMG COMPARTIDO EN UN GRUPO DE TELEGRAM, SE INTENTO PARCHAR EL ARCHIVO BOOT.IMG CON LA APLICACIÓN DE MAGISK PERO NO BOOTEA. POR AHORA ES EL ÚNICO MÉTODO QUE FUNCIONA.)
SEGUIMOS INVESTIGANDO MÉTODOS PARA INSTALAR GSI DE FORMA PERMANENTE.
HASTA AHORA LAS GSI SE INSTALAN SOLO TEMPORALMENTE USANDO DSU.
DOTOS 5.2 Y PIXEL EXPERIENCE A12 SUPER ESTABLES.
Click to expand...
Click to collapse
Spoiler: Please use English on XDA
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
📚 XDA Developers Forum Rules 📚
XDA-Developers FORUM RULES List of Forum Moderators, click HERE Delete Your XDA Account HERE 1. Search before posting. Use one of our search functions before posting or creating a new thread. Whether you have a question or just something new...
forum.xda-developers.com
Google translation below
Guide to Rooting using a BOOT.IMG patched with Magisk.
ONLY WORKS WITH "MINIMAL ADB & FASTBOOT" - USING "PLATAFORM TOOLS" DOES NOT INSTALL.
It must be updated to the latest version "RTA31.68-25"
Turn off your phone. After power off, enter FASTBOOT mode, press volume + button and power button.
fastboot flash boot_a Boot_Root.img
Once it is done, type fastboot reboot and when it starts you will have to install magisk.apk.
(BOOT_ROOT.IMG FILE SHARED IN A TELEGRAM GROUP, AN ATTEMPTED TO PATCH THE BOOT.IMG FILE WITH THE MAGISK APPLICATION BUT DOES NOT BOOT. FOR NOW IT IS THE ONLY METHOD THAT WORKS.)
WE CONTINUE INVESTIGATING METHODS TO INSTALL GSI PERMANENTLY.
UNTIL NOW THE GSI ARE INSTALLED ONLY TEMPORARILY USING DSU.
DOTOS 5.2 AND PIXEL EXPERIENCE A12 SUPER STABLE.
Click to expand...
Click to collapse
It must be updated to the latest version "RTA31.68-25"
Click to expand...
Click to collapse
Hi, I've upgraded my system but it's only RTA31.68-20 -> I can't upgrade to 25, because there is no such option.
Should it work if I use your Boot_Root.img?
iolk said:
Hi, I've upgraded my system but it's only RTA31.68-20 -> I can't upgrade to 25, because there is no such option.
Should it work if I use your Boot_Root.img?
Click to expand...
Click to collapse
I don't know, now I'm using Android 12 GSI
iolk said:
Hi, I've upgraded my system but it's only RTA31.68-20 -> I can't upgrade to 25, because there is no such option.
Should it work if I use your Boot_Root.img?
Click to expand...
Click to collapse
There's no more updates? Should be one more
Grom9A said:
There's no more updates? Should be one more
Click to expand...
Click to collapse
I think version 25 is available only for Brasil & Latin America - see this link:
MOTO G20 | Firmware Down
www.firmwaredown.com.br
As I have an European version I have only ver 20-2
How was the Boot_Root.img file produced? I could use Magisk to patch my ver-20-2 system but you wrote that it didn't work with Magisk.
iolk said:
I think version 25 is available only for Brasil & Latin America - see this link:
MOTO G20 | Firmware Down
www.firmwaredown.com.br
As I have an European version I have only ver 20-2
How was the Boot_Root.img file produced? I could use Magisk to patch my ver-20-2 system but you wrote that it didn't work with Magisk.
Click to expand...
Click to collapse
Some people try that on the telegram group, and they share the boot_root file
iolk said:
I think version 25 is available only for Brasil & Latin America - see this link:
MOTO G20 | Firmware Down
www.firmwaredown.com.br
As I have an European version I have only ver 20-2
Click to expand...
Click to collapse
I have to revise what I've written: after one day ver 20 changed to 20-2, and then one day later, it offered to upgrade to ver 25. So now I have ver 25. Sorry for misinformation.
Grom9A said:
fastboot flash boot_a Boot_Root.img
Click to expand...
Click to collapse
Hi again, I tried today to flash, but I got this error:
fastboot: error: boot partition is smaller than boot image
I'm on linux and I'm using regular platform tools. Can this be the reason?
You said "ONLY WORKS WITH "MINIMAL ADB & FASTBOOT" - USING "PLATAFORM TOOLS" DOES NOT INSTALL."
Was that the error that you experienced when using platform tools?
-------- EDIT
I found some Windows machine and can confirm that the Grom9A's method works with Minimal Adb & Fastboot.
I couldn't find any alternative for Linux.
I flashed the boot_root.img but when I reboot the phone magisk says its isn't installed, tried to patch boot.img but same thing, also my pc dosend recognize my device when it's on fastboot, have to enter on bootloader
also I have another problem, i cant unlock bootloader, because when i run the get_oem_data comand the numbers don't shown, it dont have any error mensage just the number are missing