Develop Bugs

Simple Root and Custom Recovery Installation (testers needed)

Read carefully please!
Froyo and Windows users only at this moment, very busy this days, will make it work with linux and mac os!:
For those who flashed the SBF file with RSD Lite.
Im just trying to make it all easier.
Click to expand...
Click to collapse
You dont need adb installed on your PC!
TIPs: pass MOTOBLUR SETUP.
When you are on the begining of motoblur setup after you flashed your phone, (long press menu) to use the keyboard then type: eebluroff.
You must be done now!
Click to expand...
Click to collapse
Download the zip file and unzip it wherever you want.
Enable "USB debugging" on the phone before proceeding.
Settings -> Applications -> Development -> USB debugging.
1 - Connect your phone to PC (wait for your PC to install drivers) and click on "Install Gingerbreak & 2ndInitDefy".
Note: When commands window closes automatically, check if Gingerbreak and Defy 2init are installed on the phone (MOTOROLA SIDELOADER IS INSTALLED TOO to enable non-market apps), if they are everything is going fine.
2 - Unplug the phone from your PC.
3 - Open Gingerbreak installed on your phone and click on "Root device", (it will take a while) later your phone will reboot when completed.
4 - When your phone boots, go to 2ndinitDefy installed on your phone and download a recovery (try lastest version).
5 - Turn off the phone and turn it on, when you see the led light is blue press volume down button.
You are alredy into bootmenu ready to flash!
Click to expand...
Click to collapse
Donwload:
http://www.mediafire.com/?6kbt33kx64xg11e
I tested it on my PC but I need somebody else to test it, I have adb installed on my PC, need somebody who does not have it installed.
You wont need superoneclick anymore to root!
I will make a video later! I installed Ubuntu I will try it in linux to make this work for every OS and why not MAC OS!

josuearisty said:
Froyo users only:
For those who flashed the SBF file with RSD Lite.
Im just trying to make it all easier.
Testers needed
You dont need adb installed on your PC!
Download the file, unzip it wherever you want.
Remember to enable "USB debugging" before proceding.
Settings -> Applications -> Development -> USB debugging.
Then click on "Install Gingerbreak & 2ndInitDefy"
1 - Open Gingerbreak installed on your phone and click on "Root device", your phone will reboot when completed.
2 - Go to 2ndinitDefy installed on your phone and download a recovery (try lastest version).
Donwload:
http://www.mediafire.com/?6kbt33kx64xg11e
I tested it on my PC but I need somebody else to test it, I have adb installed on my PC, need somebody who does not have it installed.
You dont need superoneclick anymore to root!
Click to expand...
Click to collapse
Hola puedes poner las instrucciones en español y para que sirve ...perdon x mi ignoracia es
Es mejor Gingleblur q froyo cuales son las ventajas y las contras...saludos amigo....

Hi there,
May I know if there is a way to switch from CWM recovery to TWRP? I tried to simply flash the zip for TWRP but then my bravo won't start...
Thanks.

mataflakitas said:
Hola puedes poner las instrucciones en español y para que sirve ...perdon x mi ignoracia es
Es mejor Gingleblur q froyo cuales son las ventajas y las contras...saludos amigo....
Click to expand...
Click to collapse
Voy a hacer guias en español para cada thread que he creado
Esto es para si algo te ha salido mal y tu telefono no quiere iniciar quedandose solamente en el logo de moto y tienes que por desgracia FLASHEAR el SBF de Froyo con RSD LITE.
Entonces despues que estes en Froyo, podras seguir estos pasos y no tener que usar superoneclick, en mi opinion esto es mas facil.
Pruebalo cuando puedas!
brucezyc said:
Hi there,
May I know if there is a way to switch from CWM recovery to TWRP? I tried to simply flash the zip for TWRP but then my bravo won't start...
Thanks.
Click to expand...
Click to collapse
I try doing it too but no success, I think you should flash first a custom rom, then you will be able to flash touch recovery and it will for sure work.
I will let know about some test I make!

I'll be honest, I didn't try it, but it will work. That's really not a bad idea and would work with any phone Gingerbreak works on....You should release that in Android General.
I would use it, I'm just too lazy to flash an sbf and then set my phone back up again. I'm happy with my Bravo for the moment...and its my onlyl phone...That really is a simple, yet useful, solution.

gracias
josuearisty said:
Voy a hacer guias en español para cada thread que he creado
Esto es para si algo te ha salido mal y tu telefono no quiere iniciar quedandose solamente en el logo de moto y tienes que por desgracia FLASHEAR el SBF de Froyo con RSD LITE.
Entonces despues que estes en Froyo, podras seguir estos pasos y no tener que usar superoneclick, en mi opinion esto es mas facil.
Pruebalo cuando puedas!
I try doing it too but no success, I think you should flash first a custom rom, then you will be able to flash touch recovery and it will for sure work.
I will let know about some test I make!
Click to expand...
Click to collapse
Oooo muchas gracias amigo voy a probar que suerte q hablas español estoy aprendiendo muchas cosas contigo amigo josuearisty... saludos

oh no, i'm not unglug my phone after install Install Gingerbreak & 2ndInitDefy, then i click Gingerbreak to root
and now it's not on (, just have logo motorola
help me
now i'm ok, i wipe data, cache and do it again
but i dont click root on Gingerbreak , but on my phone still have superuser icon ? it success or not
i used superoneclick to root, but not success after i installed Gingerbreak & 2ndInitDefy

skeevy420 said:
I'll be honest, I didn't try it, but it will work. That's really not a bad idea and would work with any phone Gingerbreak works on....You should release that in Android General.
I would use it, I'm just too lazy to flash an sbf and then set my phone back up again. I'm happy with my Bravo for the moment...and its my onlyl phone...That really is a simple, yet useful, solution.
Click to expand...
Click to collapse
I think it is still not that simple, I will post some tips and be more specif.
mataflakitas said:
Oooo muchas gracias amigo voy a probar que suerte q hablas español estoy aprendiendo muchas cosas contigo amigo josuearisty... saludos
Click to expand...
Click to collapse
Siempre mi amigo, cualquier cosa estamos aqui.
kevins547 said:
oh no, i'm not unglug my phone after install Install Gingerbreak & 2ndInitDefy, then i click Gingerbreak to root
and now it's not on (, just have logo motorola
help me
now i'm ok, i wipe data, cache and do it again
but i dont click root on Gingerbreak , but on my phone still have superuser icon ? it success or not
i used superoneclick to root, but not success after i installed Gingerbreak & 2ndInitDefy
Click to expand...
Click to collapse
Maybe you did not follow steps as you should, I think I have to make steps easier to understand, so that noobs and advanced users can do it all.
Thanks for trying!

when unglug the phone from Pc, the box USB debugging is tick in or not ?

kevins547 said:
when unglug the phone from Pc, the box USB debugging is tick in or not ?
Click to expand...
Click to collapse
Of course it has to be enable.
Else it is not going to work.

gracias
josuearisty said:
Of course it has to be enable.
Else it is not going to work.
Click to expand...
Click to collapse
amigo podra subir un video para saber con mayor facilida como se hace y las instrucciones en español bueno tambien para ingles claro... creo que novatos como yo ...avemos muchos en este foro y estariamos muy agradecicdo con usted amigo josuearisty ...
oye amigo otra duda que pasa si mi pc tiene adb instalado.... puede ocacionar un error en mi motorola bravo ...?
otra duda por que cuando baje su archivo mi pc me lo detecto como un virus...

mataflakitas said:
amigo podra subir un video para saber con mayor facilida como se hace y las instrucciones en español bueno tambien para ingles claro... creo que novatos como yo ...avemos muchos en este foro y estariamos muy agradecicdo con usted amigo josuearisty ...
oye amigo otra duda que pasa si mi pc tiene adb instalado.... puede ocacionar un error en mi motorola bravo ...?
otra duda por que cuando baje su archivo mi pc me lo detecto como un virus...
Click to expand...
Click to collapse
Esta semana estare algo ocupado, el video creo que lo hare la semana que viene.
Usar el adb del archivo no te va a ocasionar ningun problema, ni a tu telefono ni a la computadora.
La aplicacion gingerbreak tiene un exploit dentro y los antivirus lo identifican como un virus, solo desactivalo si lo vas a usar.
--------------------------------------------------------
If you have adb installed on your pc, using this one will cause no problem to the phone or your pc.
Your antivirus detects gingerbreak as a virus because of an exploit command inside the apk file, you can deactivate your antivirus and use it with no problem, no risk with it.

I'll add, s1c/rage against the cage/gingerbreak all show up as viruses because they are. Not kill you PC virus, but virus none the less. Technically they're exploits, but still get picked up by scanners.

Gonna need some testers for LINUX and MAC, when its ready I will you know people!

Working great!. Will flash a Rom right now . Thnx to make our life easier!.

Took a few flashes, but I got there in the end! Great stuff, thanks!!

Worked like a charm. Thanks!!

[MOD][TUT] Change LCD Density Permanently (Survive ROM Flashing)

You must be rooted to do this!
This should work in any device and any ROM but I am not supporting any device except Nexus 4.
First, Create a notepad with notepad++ or with app like Root Explorer or similar app.
Put this script inside it,
Code:
qemu.sf.lcd_density="put whatever you want (e.g. 240)" (without quote)
Save file and rename it to "local.prop" (without quote),
Then copy the file to /data , reboot.
This save me some time after updating my ROM, so I don't need to change it every single update. Unless you wipe your data or do factory reset the lcd density will be the same.
If you already have local.prop file inside your /data just add the script inside it, you don't need to create a new file.
This is my local.prop file with lcd density set to 240 dpi (tested on CM10.2 and works great), just change it to whatever you want if you want to use it.
https://mega.co.nz/#!UdZmwCqb!0av_z4RHgAsSv3wekw7DZkAUqdoV8qvwKKhBaPUKL84
Note this! Changing your LCD Density may causing incompatibilities with some app. I am using 240 dpi on CM10.2 and never had any issue with any app.
I AM NOT RESPONSIBLE IF YOU BRICK YOUR DEVICE, PUT IT INTO BOOTLOOP, OR CAUSING THERMONUCLEAR WAR, MAKE A NANDROID BEFORE YOU DO THIS!

Hi, Am I supposed to create a folder named reboot or do I have to reboot after copying the file to /data, also any particular permissions? Thanks.
Sent using Nexus 4 Telcel 4G LTE Mexico

Carlosmadiam said:
Hi, Am I supposed to create a folder named reboot or do I have to reboot after copying the file to /data, also any particular permissions? Thanks.
Sent using Nexus 4 Telcel 4G LTE Mexico
Click to expand...
Click to collapse
Hola, como veo en tú firma me imagino que hablas español, te explico fácil
Descarga por ejemplo la aplicacion Root Explorer, una vez instalada abrela y crea un archivo al archivo renombralo "local.prop" sin las comillas
Una vez creado abrelo con el editor de texto de la misma App e insertas el siguiente codigo sin comillas
qemu.sf.lcd_density="240" asi como se ve con comillas al final en el 240
Guardas el archivo, reinicias el teléfono y listo
I hope to be helpfull
---------- Post added at 02:49 PM ---------- Previous post was at 02:28 PM ----------
aimcr7 said:
You must be rooted to do this!
This should work in any device and any ROM but I am not supporting any device except Nexus 4.
First, Create a notepad with notepad++ or with app like Root Explorer or similar app.
Put this script inside it,
Code:
qemu.sf.lcd_density="put whatever you want (e.g. 240)" (without quote)
Save file and rename it to "local.prop" (without quote),
Then copy the file to /data , reboot.
This save me some time after updating my ROM, so I don't need to change it every single update. Unless you wipe your data or do factory reset the lcd density will be the same.
If you already have local.prop file inside your /data just add the script inside it, you don't need to create a new file.
This is my local.prop file with lcd density set to 240 dpi (tested on CM10.2 and works great), just change it to whatever you want if you want to use it.
https://mega.co.nz/#!UdZmwCqb!0av_z4RHgAsSv3wekw7DZkAUqdoV8qvwKKhBaPUKL84
Note this! Changing your LCD Density may causing incompatibilities with some app. I am using 240 dpi on CM10.2 and never had any issue with any app.
I AM NOT RESPONSIBLE IF YOU BRICK YOUR DEVICE, PUT IT INTO BOOTLOOP, OR CAUSING THERMONUCLEAR WAR, MAKE A NANDROID BEFORE YOU DO THIS!
Click to expand...
Click to collapse
What is the goal of this MOD? what's supposed to be the change?

neoriix said:
Hola, como veo en tú firma me imagino que hablas español, te explico fácil
Descarga por ejemplo la aplicacion Root Explorer, una vez instalada abrela y crea un archivo al archivo renombralo "local.prop" sin las comillas
Una vez creado abrelo con el editor de texto de la misma App e insertas el siguiente codigo sin comillas
qemu.sf.lcd_density="240" asi como se ve con comillas al final en el 240
Guardas el archivo, reinicias el teléfono y listo
I hope to be helpful
Yes I do speak Spanish, I guess you didn't get my question, I need to know what permissions to set on the file and also if it just goes on "/data"
I have it on that folder but it does not survive a new Rom flash, thanks.
Sent using Nexus 4 Telcel 4G LTE Mexico
Click to expand...
Click to collapse

Carlosmadiam said:
Hi, Am I supposed to create a folder named reboot or do I have to reboot after copying the file to /data, also any particular permissions? Thanks.
Sent using Nexus 4 Telcel 4G LTE Mexico
Click to expand...
Click to collapse
I use rw- r-- r--
No, just reboot. Sorry for late answer.
Sent from my Nexus 4 using Tapatalk 4

neoriix said:
Hola, como veo en tú firma me imagino que hablas español, te explico fácil
Descarga por ejemplo la aplicacion Root Explorer, una vez instalada abrela y crea un archivo al archivo renombralo "local.prop" sin las comillas
Una vez creado abrelo con el editor de texto de la misma App e insertas el siguiente codigo sin comillas
qemu.sf.lcd_density="240" asi como se ve con comillas al final en el 240
Guardas el archivo, reinicias el teléfono y listo
I hope to be helpfull
---------- Post added at 02:49 PM ---------- Previous post was at 02:28 PM ----------
What is the goal of this MOD? what's supposed to be the change?
Click to expand...
Click to collapse
It just change your lcd density and to save you some time after updating ROM, so you dont have to change lcd density from build.prop in every update.
Sent from my Nexus 4 using Tapatalk 4

Carlosmadiam said:
neoriix said:
Hola, como veo en tú firma me imagino que hablas español, te explico fácil
Descarga por ejemplo la aplicacion Root Explorer, una vez instalada abrela y crea un archivo al archivo renombralo "local.prop" sin las comillas
Una vez creado abrelo con el editor de texto de la misma App e insertas el siguiente codigo sin comillas
qemu.sf.lcd_density="240" asi como se ve con comillas al final en el 240
Guardas el archivo, reinicias el teléfono y listo
I hope to be helpful
Yes I do speak Spanish, I guess you didn't get my question, I need to know what permissions to set on the file and also if it just goes on "/data"
I have it on that folder but it does not survive a new Rom flash, thanks.
Sent using Nexus 4 Telcel 4G LTE Mexico
Click to expand...
Click to collapse
Its /data partition not sdcard/data.
Change its permission to rw- r-- r--.
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse

hmm. not working for me on my oneplus one.. any ideas? I put it in /data. created the file usiing root exploter.

Thanks so much for this!!!! I've been having issues with lcd density in the latest CM11 M9 (and nightlies), causing weird performance with the Google Cardboard app, for example. This totally solved the problem!
Thanks again

thanks
working on HTC cahcha

Redmi Note 8 Pro Hard Brick & Black Screen

Hi everyone,
I have a big problem since yesterday, I am under the version Miui 11 Android 10 rooted under TWRP unofficial and I wanted to install a Rom Custom, I of which wanted to install the official version of TWRP, when I have Flash Recovery Recovery.img after restarting... BLACK SCREEN I could not have returned to FASTBOOT mode and in RECOVERY only the NOTIFICATION which is on, when I stay press POWER + VOLUM UP I have a SOUND on PC like what the PHONE is connected for 5 SECONDS after it DISCONNECTS, so I followed a tutorial to open my phone and disconnect my BATTERY... always the same problem :/
if you can help me please :/
I would like to specify that I never know that when I wanted to put the official version of TWRP my phone was around 30% ... ?
Thanks you.

Test Point
Tiix31Dev said:
Hi everyone,
I have a big problem since yesterday, I am under the version Miui 11 Android 10 rooted under TWRP unofficial and I wanted to install a Rom Custom, I of which wanted to install the official version of TWRP, when I have Flash Recovery Recovery.img after restarting... BLACK SCREEN I could not have returned to FASTBOOT mode and in RECOVERY only the NOTIFICATION which is on, when I stay press POWER + VOLUM UP I have a SOUND on PC like what the PHONE is connected for 5 SECONDS after it DISCONNECTS, so I followed a tutorial to open my phone and disconnect my BATTERY... always the same problem :/
if you can help me please :/
I would like to specify that I never know that when I wanted to put the official version of TWRP my phone was around 30% ... ?
Thanks you.
Click to expand...
Click to collapse
I am writing this for anyone to use at their own risk, it is not complicated.
Once updated from Indonesia Miui 11 Android 9 rom to Android 10 and installed a recovery incorrectly and I have returned to
lock my Redmi Note 8 Pro (Begoña) and this time I have not waited for the battery to drain as in the previous one (post # 196)
I have used the Test Point method.
This is what I have done:
-Copied the folder from the Indonesian rom V10.4.2.0, once the zip is unzipped, in Computer> C
-Installed SP Flash Tool v5. 1924 Win also in C
-Removed the back of the mobile and removed the housing that is above the battery (Photo 1).
-Prepared a piece of fine copper wire, I have connected one end to a screw on the mobile plate making ground (Photo 2) and to
the other end I have connected a nail (Photo 4) .Then I have opened the Flash Tool and I have put the scatter that
*it is in the "images" folder of the rom that I had copied in C, and the DA and the authentication file that is in it
*Flash Tool folder and I have connected the usb cable to the mobile, only to the mobile.
-I pressed "Download Only" and connected the other end of the copper cable, prepared with a nail, in the
*point Kcol0 (Photo 3) and I have connected the usb cable to the computer. The bottom bar of the FlashTool has started to fill in
*color red first and then change color until the "Download Ok" symbol appears
*I have done it with the battery disconnected (others say it is connected) and with all the files marked on the
*Flash Tool (others say that you only have to mark the preolader) and it has worked for me.
*
After a few minutes the mobile has started with MIUI 10 and Android 9, as expected by the rom with which I have done it and
then I have already installed MIUI 11 and then I have updated to Android 10, both with MiFlash20191206 of Xiaomi. To finish
installing the appropriate recovery, this time yes, and doing root
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
Esto lo escribo para que lo use quien quiera siempre bajo su propia responsabilidad, no es complicado.
Una vez actualizado de rom Indonesia Miui 11 Android 9 a Android 10 e instalado un recovery de forma incorrecta y he vuelto a
bloquear mi Redmi Note 8 Pro (Begoña) y esta vez no he esperado a que se agote la batería como en la anterior (post #196)
sino que he usado el método del Test Point.
Esto es lo he hecho:
-Copiado la carpeta de la rom de Indonesia V10.4.2.0, una vez descomprimido el zip, en Equipo > C
-Instalado SP Flash Tool v5. 1924 Win también en C
-Desmontado la trasera del móvil y quitado la carcasa que hay por arriba de la batería (Foto 1).
-Preparado un trozo de cable fino de cobre, un estremo lo he conectado a un tornillo en la placa del móvil haciendo masa(Foto 2)
y al otro extremo le he conectado un clavo (Foto 4).luego he abierto el Flash Tool y he puesto el scatter que
hay en la carpeta "images" de la rom que que había copiado en C, y el DA y archivo de autentificación que hay en la propia
carpeta del Flash Tool y he conectado el cable usb al móvil, solo al móvil.
-He pulsado "Download Only" y he conectado el otro extremo del cable de cobre, preparado con un clavo, en el
punto Kcol0 (Foto 3) y he conectado el cable usb al ordenador. La barra de abajo del FlashTool ha empezado a rellenarse en
color rojo primero y luego cambia de color hasta que aparece el simbolo "Download Ok"
Lo he hecho con la batería desconectada (otros dicen que conectada) y con todo los archivos marcados en el
Flash Tool (otros dicen que sólo hay que marcar el preolader) y me ha funcionado.
Después de unos minutos se ha iniciado el móvil con MIUI 10 y Android 9, como era de esperar por la rom con la que lo he hecho y luego ya le he instalado
MIUI 11 y después he actualizado a Android 10, los dos con MiFlash20191206 de Xiaomi. Para terminar instalando el recovery
apropiado, esta vez sí, y haciendo root

javizeta said:
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
The first time it crashed I revived it waiting for the battery to drain (post # 196) and now I have it back
to briquet when flashing wrong twrp and I have not waited for it to be exhausted again but I have done it
with a test point.
In photos two and three I show you where you have to connect the cable and privately I send you a link to an explanatory video
because I don't know if I can put links to youtube here.
It worked perfectly for me on the first try.
Click to expand...
Click to collapse
hey how to do me a favor pass the tutorial because I have the same problem:fingers-crossed:

maikiller said:
hey how to do me a favor pass the tutorial because I have the same problem:fingers-crossed:
Click to expand...
Click to collapse
I used the google search engine: tutorial to unbrick Chinese MTK phone and in the results I chose the Azlan Laion video.
Utilicé el buscador de google: tutorial desbrickear telefono MTK chino y en los resultados elegí el video de Azlan Laion.
Updated post # 2
Read please
Actualizado post #2
Leer, por favor

I definitely would appreciate anything that would get this flash to go through... I already have mine apart and have been trying everything to get it unbricked with no success as of yet...
Sent from my Redmi Note 8 Pro using XDA-Developers Legacy app

javizeta said:
I am writing this for anyone to use at their own risk, it is not complicated.
Once updated from Indonesia Miui 11 Android 9 rom to Android 10 and installed a recovery incorrectly and I have returned to
lock my Redmi Note 8 Pro (Begoña) and this time I have not waited for the battery to drain as in the previous one (post # 196)
I have used the Test Point method.
This is what I have done:
-Copied the folder from the Indonesian rom V10.4.2.0, once the zip is unzipped, in Computer> C
-Installed SP Flash Tool v5. 1924 Win also in C
-Removed the back of the mobile and removed the housing that is above the battery (Photo 1).
-Prepared a piece of fine copper wire, I have connected one end to a screw on the mobile plate making ground (Photo 2) and to
the other end I have connected a nail (Photo 4) .Then I have opened the Flash Tool and I have put the scatter that
*it is in the "images" folder of the rom that I had copied in C, and the DA and the authentication file that is in it
*Flash Tool folder and I have connected the usb cable to the mobile, only to the mobile.
-I pressed "Download Only" and connected the other end of the copper cable, prepared with a nail, in the
*point Kcol0 (Photo 3) and I have connected the usb cable to the computer. The bottom bar of the FlashTool has started to fill in
*color red first and then change color until the "Download Ok" symbol appears
*I have done it with the battery disconnected (others say it is connected) and with all the files marked on the
*Flash Tool (others say that you only have to mark the preolader) and it has worked for me.
*
After a few minutes the mobile has started with MIUI 10 and Android 9, as expected by the rom with which I have done it and
then I have already installed MIUI 11 and then I have updated to Android 10, both with MiFlash20191206 of Xiaomi. To finish
installing the appropriate recovery, this time yes, and doing root
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
Esto lo escribo para que lo use quien quiera siempre bajo su propia responsabilidad, no es complicado.
Una vez actualizado de rom Indonesia Miui 11 Android 9 a Android 10 e instalado un recovery de forma incorrecta y he vuelto a
bloquear mi Redmi Note 8 Pro (Begoña) y esta vez no he esperado a que se agote la batería como en la anterior (post #196)
sino que he usado el método del Test Point.
Esto es lo he hecho:
-Copiado la carpeta de la rom de Indonesia V10.4.2.0, una vez descomprimido el zip, en Equipo > C
-Instalado SP Flash Tool v5. 1924 Win también en C
-Desmontado la trasera del móvil y quitado la carcasa que hay por arriba de la batería (Foto 1).
-Preparado un trozo de cable fino de cobre, un estremo lo he conectado a un tornillo en la placa del móvil haciendo masa(Foto 2)
y al otro extremo le he conectado un clavo (Foto 4).luego he abierto el Flash Tool y he puesto el scatter que
hay en la carpeta "images" de la rom que que había copiado en C, y el DA y archivo de autentificación que hay en la propia
carpeta del Flash Tool y he conectado el cable usb al móvil, solo al móvil.
-He pulsado "Download Only" y he conectado el otro extremo del cable de cobre, preparado con un clavo, en el
punto Kcol0 (Foto 3) y he conectado el cable usb al ordenador. La barra de abajo del FlashTool ha empezado a rellenarse en
color rojo primero y luego cambia de color hasta que aparece el simbolo "Download Ok"
Lo he hecho con la batería desconectada (otros dicen que conectada) y con todo los archivos marcados en el
Flash Tool (otros dicen que sólo hay que marcar el preolader) y me ha funcionado.
Después de unos minutos se ha iniciado el móvil con MIUI 10 y Android 9, como era de esperar por la rom con la que lo he hecho y luego ya le he instalado
MIUI 11 y después he actualizado a Android 10, los dos con MiFlash20191206 de Xiaomi. Para terminar instalando el recovery
apropiado, esta vez sí, y haciendo root
Click to expand...
Click to collapse
----------
Your method does not work because it depends on the motherboard you are using, for example the Mediatek uses another type of test point and they are blocked, I think that is why Xiaomi does not want to give more support to the Xiaomi Redmi Note 8 Pro (Begonia) as devices!
I have tried it several times and it does not work, the only thing is a working method is: Having the volume up pressed until the Mode Flash mode is activated and with the SP Flash Tool. The problem is that it asks for an Authorized Account and it is what I am looking for (of course to payment)
The Procedure
0. Unzip your device's firmware.
1. Install MiFlashPro.
2. Navigate to (installation_directory)/MiFlashPro/SP_Flash_Tool/mi and run "account_auth.exe" (Run as administrator). In the window that opens, log in with an authorized Xiaomi Account.
3. Navigate to (installation_directory)/MiFlashPro/SP_Flash_Tool nad run "flash_tool.exe". The SP_Flash_Tool interface opens. Now you have to select the 3 files:
Download-Agent: (installation_directory)/MiFlashPro/SP_Flash_Tool/MTK_AllInOne_DA_mt6765_mt6785.bin
Scatter-loading File: You will find this one on your stock rom folder, especially on the folder called "images".
Authentication File: (installation_directory)/MiFlashPro/SP_Flash_Tool/auth_sv5.auth
4. Press the "Download" button.
5. Connect the USB cable to your PC but NOT YET to your phone.
6. Hold the vol+ button on your phone pressed and NOW connect the cable to it.
7. The program should now react and start the flashing process without giving an error.
8. Wait for the flashing process to end and enjoy!

javizeta said:
I am writing this for anyone to use at their own risk, it is not complicated.
Once updated from Indonesia Miui 11 Android 9 rom to Android 10 and installed a recovery incorrectly and I have returned to
lock my Redmi Note 8 Pro (Begoña) and this time I have not waited for the battery to drain as in the previous one (post # 196)
I have used the Test Point method.
This is what I have done:
-Copied the folder from the Indonesian rom V10.4.2.0, once the zip is unzipped, in Computer> C
-Installed SP Flash Tool v5. 1924 Win also in C
-Removed the back of the mobile and removed the housing that is above the battery (Photo 1).
-Prepared a piece of fine copper wire, I have connected one end to a screw on the mobile plate making ground (Photo 2) and to
the other end I have connected a nail (Photo 4) .Then I have opened the Flash Tool and I have put the scatter that
*it is in the "images" folder of the rom that I had copied in C, and the DA and the authentication file that is in it
*Flash Tool folder and I have connected the usb cable to the mobile, only to the mobile.
-I pressed "Download Only" and connected the other end of the copper cable, prepared with a nail, in the
*point Kcol0 (Photo 3) and I have connected the usb cable to the computer. The bottom bar of the FlashTool has started to fill in
*color red first and then change color until the "Download Ok" symbol appears
*I have done it with the battery disconnected (others say it is connected) and with all the files marked on the
*Flash Tool (others say that you only have to mark the preolader) and it has worked for me.
*
After a few minutes the mobile has started with MIUI 10 and Android 9, as expected by the rom with which I have done it and
then I have already installed MIUI 11 and then I have updated to Android 10, both with MiFlash20191206 of Xiaomi. To finish
installing the appropriate recovery, this time yes, and doing root
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
Esto lo escribo para que lo use quien quiera siempre bajo su propia responsabilidad, no es complicado.
Una vez actualizado de rom Indonesia Miui 11 Android 9 a Android 10 e instalado un recovery de forma incorrecta y he vuelto a
bloquear mi Redmi Note 8 Pro (Begoña) y esta vez no he esperado a que se agote la batería como en la anterior (post #196)
sino que he usado el método del Test Point.
Esto es lo he hecho:
-Copiado la carpeta de la rom de Indonesia V10.4.2.0, una vez descomprimido el zip, en Equipo > C
-Instalado SP Flash Tool v5. 1924 Win también en C
-Desmontado la trasera del móvil y quitado la carcasa que hay por arriba de la batería (Foto 1).
-Preparado un trozo de cable fino de cobre, un estremo lo he conectado a un tornillo en la placa del móvil haciendo masa(Foto 2)
y al otro extremo le he conectado un clavo (Foto 4).luego he abierto el Flash Tool y he puesto el scatter que
hay en la carpeta "images" de la rom que que había copiado en C, y el DA y archivo de autentificación que hay en la propia
carpeta del Flash Tool y he conectado el cable usb al móvil, solo al móvil.
-He pulsado "Download Only" y he conectado el otro extremo del cable de cobre, preparado con un clavo, en el
punto Kcol0 (Foto 3) y he conectado el cable usb al ordenador. La barra de abajo del FlashTool ha empezado a rellenarse en
color rojo primero y luego cambia de color hasta que aparece el simbolo "Download Ok"
Lo he hecho con la batería desconectada (otros dicen que conectada) y con todo los archivos marcados en el
Flash Tool (otros dicen que sólo hay que marcar el preolader) y me ha funcionado.
Después de unos minutos se ha iniciado el móvil con MIUI 10 y Android 9, como era de esperar por la rom con la que lo he hecho y luego ya le he instalado
MIUI 11 y después he actualizado a Android 10, los dos con MiFlash20191206 de Xiaomi. Para terminar instalando el recovery
apropiado, esta vez sí, y haciendo root
Click to expand...
Click to collapse
excuse me , could u wirte in english on these pictures , i can not read ur Lang, please,:highfive::highfive: please

gadmei.tw said:
excuse me , could u wirte in english on these pictures , i can not read ur Lang, please,:highfive::highfive: please
Click to expand...
Click to collapse
These are the texts included in the photos translated into English using the google translator
Photo 2: It is to this screw that I have attached one end of the cable
Photo 3: Upper label: To this round contact you have to connect the other end of the cable
Bottom epigraph: It is just above the battery connector. Battery disconnected.

javizeta said:
These are the texts included in the photos translated into English using the google translator
Photo 2: It is to this screw that I have attached one end of the cable
Photo 3: Upper label: To this round contact you have to connect the other end of the cable
Bottom epigraph: It is just above the battery connector. Battery disconnected.
Click to expand...
Click to collapse
thank u!
i will try through these point

need video please/necesito el video por favor
hi budy, how could you send me the video?, i got the same problem with my redmi note 8 pro
Hola amigo, espero que te encuentres bien, ¿Como podrías enviarme el video?, tengo el mismo problema con mi redmi note 8 pro, se apagó y no ha encendido

leandro iván said:
hi budy, how could you send me the video?, i got the same problem with my redmi note 8 pro
Hola amigo, espero que te encuentres bien, ¿Como podrías enviarme el video?, tengo el mismo problema con mi redmi note 8 pro, se apagó y no ha encendido
Click to expand...
Click to collapse
What video are you referring to?

android / data folder appears empty in file manager

Si trato de buscar las carpetas que están dentro de este directorio para, por ejemplo, eliminar los podcasts descargados, ivoox me aparece vacío, pero si entro desde la computadora no está vacío. Ya intenté hacer un reset de fábrica, me pasa desde que tengo android 11, ¿alguna idea de cómo solucionarlo?
Translation: If I try to find the folders that are inside this directory to, for example, delete the downloaded podcasts, ivoox appears empty, but if I enter from the computer it is not empty. I already tried to do a factory reset, it happens to me since I have android 11, any idea how to fix it?

got same issue as its driving me nuts, thought it might have been a setting that needed to be turned on but can't find nothing yet.

Happen to me too. Android 11, for example, I can not delete files in Android folder. Android 10 worked ok.

ckchakack said:
Si trato de buscar las carpetas que están dentro de este directorio para, por ejemplo, eliminar los podcasts descargados, ivoox me aparece vacío, pero si entro desde la computadora no está vacío. Ya intenté hacer un reset de fábrica, me pasa desde que tengo android 11, ¿alguna idea de cómo solucionarlo?
Translation: If I try to find the folders that are inside this directory to, for example, delete the downloaded podcasts, ivoox appears empty, but if I enter from the computer it is not empty. I already tried to do a factory reset, it happens to me since I have android 11, any idea how to fix it?
Click to expand...
Click to collapse
Use mixplorer. I don't have problems viewing that carpet content using that.

it will show up if u can to your pc.

This is a new change in Android 11 ... i just upgraded last night not knowing this ... and now many apps stopped working , the ones where i need to use, modify , add custome files under Android\data\<software>
Unfortunately there is no workaround right now

bogdandumitrescu said:
This is a new change in Android 11 ... i just upgraded last night not knowing this ... and now many apps stopped working , the ones where i need to use, modify , add custome files under Android\data\<software>
Unfortunately there is no workaround right now
Click to expand...
Click to collapse
Can you use MiXplorer to see if it works?

ongxa said:
Can you use MiXplorer to see if it works?
Click to expand...
Click to collapse
Just now tried to access Android/data directory with root access on MiXplorer and it is working.

ckchakack said:
Si trato de buscar las carpetas que están dentro de este directorio para, por ejemplo, eliminar los podcasts descargados, ivoox me aparece vacío, pero si entro desde la computadora no está vacío. Ya intenté hacer un reset de fábrica, me pasa desde que tengo android 11, ¿alguna idea de cómo solucionarlo?
Translation: If I try to find the folders that are inside this directory to, for example, delete the downloaded podcasts, ivoox appears empty, but if I enter from the computer it is not empty. I already tried to do a factory reset, it happens to me since I have android 11, any idea how to fix it?
Click to expand...
Click to collapse
There is only 1 application APPROVED BY GOOGLE that lets you only delete files.... called Files by Marc Apps & Software

There is only 1 application APPROVED BY GOOGLE that lets you only delete files.... called Files by Marc Apps & Software
bogdandumitrescu said:
There is only 1 application APPROVED BY GOOGLE that lets you only delete files.... called Files by Marc Apps & Software
Click to expand...
Click to collapse

guru1001 said:
Just now tried to access Android/data directory with root access on MiXplorer and it is working.
Click to expand...
Click to collapse
I'm not sure about root... But I'm taking about Android 11

Necesito ayuda para cambiarle la rom a mi telefono MotoG7 Play/I need help changing the rom on my MotoG7 Play phone

Hola, quiero cambiarle la rom a mi telefono por una mas mejor, pero no encuentro la version de twrp para el telefono, ademas eh intentado aplicarle root pero no he tenido exito, cualquier ayuda o sugerencia es bienvenida.
Hello, I want to change the rom on my phone for a better one, but I can't find the twrp version for the phone, also I've tried to apply root but I haven't been successful, any help or suggestion is welcome.

Mystery Mx said:
Hola, quiero cambiarle la rom a mi telefono por una mas mejor, pero no encuentro la version de twrp para el telefono, ademas eh intentado aplicarle root pero no he tenido exito, cualquier ayuda o sugerencia es bienvenida.
Hello, I want to change the rom on my phone for a better one, but I can't find the twrp version for the phone, also I've tried to apply root but I haven't been successful, any help or suggestion is welcome.
Click to expand...
Click to collapse
Install DevCheck
https://play.google.com/store/apps/details?id=flar2.devcheck
DevCheck/system/
What is listed as Device and Product?

sd_shadow said:
Install DevCheck
https://play.google.com/store/apps/details?id=flar2.devcheck
DevCheck/system/
What is listed as Device and Product?
Click to expand...
Click to collapse
Esto es lo que me aparece
This is what appears to me

sd_shadow said:
Install DevCheck
https://play.google.com/store/apps/details?id=flar2.devcheck
DevCheck/system/
What is listed as Device and Product?
Click to expand...
Click to collapse
Esto es lo que me aparece
This is what appears to me

Mystery Mx said:
Esto es lo que me aparece
This is what appears to me
Click to expand...
Click to collapse
Yes so you are looking for TWRP for "channel" which is you device's codename

sd_shadow said:
Yes so you are looking for TWRP for "channel" which is you device's codename
Click to expand...
Click to collapse
¿Descargo la version channel de TWRP?
Me aparecio la version TWRP river para el G7 normal, ¿me puede servir esa?
Did you download the channel version of TWRP?
The TWRP river version appeared for the normal G7, can that help me?

Mystery Mx said:
¿Descargo la version channel de TWRP?
Me aparecio la version TWRP river para el G7 normal, ¿me puede servir esa?
Did you download the channel version of TWRP?
The TWRP river version appeared for the normal G7, can that help me?
Click to expand...
Click to collapse
Ya di con la versión correcta de twrp, es esa la que dijiste, pense que era un error en la traduccion ya que uso el traductor de google, no se ingles
I already found the correct version of twrp, is that the one you said, I thought it was an error in the translation since I use the google translator, I don't know English

Mystery Mx said:
Ya di con la versión correcta de twrp, es esa la que dijiste, pense que era un error en la traduccion ya que uso el traductor de google, no se ingles
I already found the correct version of twrp, is that the one you said, I thought it was an error in the translation since I use the google translator, I don't know English
Click to expand...
Click to collapse
Surgio un problema, instale el twrp channel pero cuando intento acceder desde el telefono, este hace bootloop, despues de 3 reinicios vuelve a iniciar normal, tengo que iniciarlo desde el pc ya que no puedo desde el telefono
A problem arose, I installed the twrp channel but when I try to access from the phone, it does bootloop, after 3 reboots it starts again normally, I have to start it from the pc since I can't from the phone