Develop Bugs

Simple Root and Custom Recovery Installation (testers needed)

Read carefully please!
Froyo and Windows users only at this moment, very busy this days, will make it work with linux and mac os!:
For those who flashed the SBF file with RSD Lite.
Im just trying to make it all easier.
Click to expand...
Click to collapse
You dont need adb installed on your PC!
TIPs: pass MOTOBLUR SETUP.
When you are on the begining of motoblur setup after you flashed your phone, (long press menu) to use the keyboard then type: eebluroff.
You must be done now!
Click to expand...
Click to collapse
Download the zip file and unzip it wherever you want.
Enable "USB debugging" on the phone before proceeding.
Settings -> Applications -> Development -> USB debugging.
1 - Connect your phone to PC (wait for your PC to install drivers) and click on "Install Gingerbreak & 2ndInitDefy".
Note: When commands window closes automatically, check if Gingerbreak and Defy 2init are installed on the phone (MOTOROLA SIDELOADER IS INSTALLED TOO to enable non-market apps), if they are everything is going fine.
2 - Unplug the phone from your PC.
3 - Open Gingerbreak installed on your phone and click on "Root device", (it will take a while) later your phone will reboot when completed.
4 - When your phone boots, go to 2ndinitDefy installed on your phone and download a recovery (try lastest version).
5 - Turn off the phone and turn it on, when you see the led light is blue press volume down button.
You are alredy into bootmenu ready to flash!
Click to expand...
Click to collapse
Donwload:
http://www.mediafire.com/?6kbt33kx64xg11e
I tested it on my PC but I need somebody else to test it, I have adb installed on my PC, need somebody who does not have it installed.
You wont need superoneclick anymore to root!
I will make a video later! I installed Ubuntu I will try it in linux to make this work for every OS and why not MAC OS!

josuearisty said:
Froyo users only:
For those who flashed the SBF file with RSD Lite.
Im just trying to make it all easier.
Testers needed
You dont need adb installed on your PC!
Download the file, unzip it wherever you want.
Remember to enable "USB debugging" before proceding.
Settings -> Applications -> Development -> USB debugging.
Then click on "Install Gingerbreak & 2ndInitDefy"
1 - Open Gingerbreak installed on your phone and click on "Root device", your phone will reboot when completed.
2 - Go to 2ndinitDefy installed on your phone and download a recovery (try lastest version).
Donwload:
http://www.mediafire.com/?6kbt33kx64xg11e
I tested it on my PC but I need somebody else to test it, I have adb installed on my PC, need somebody who does not have it installed.
You dont need superoneclick anymore to root!
Click to expand...
Click to collapse
Hola puedes poner las instrucciones en español y para que sirve ...perdon x mi ignoracia es
Es mejor Gingleblur q froyo cuales son las ventajas y las contras...saludos amigo....

Hi there,
May I know if there is a way to switch from CWM recovery to TWRP? I tried to simply flash the zip for TWRP but then my bravo won't start...
Thanks.

mataflakitas said:
Hola puedes poner las instrucciones en español y para que sirve ...perdon x mi ignoracia es
Es mejor Gingleblur q froyo cuales son las ventajas y las contras...saludos amigo....
Click to expand...
Click to collapse
Voy a hacer guias en español para cada thread que he creado
Esto es para si algo te ha salido mal y tu telefono no quiere iniciar quedandose solamente en el logo de moto y tienes que por desgracia FLASHEAR el SBF de Froyo con RSD LITE.
Entonces despues que estes en Froyo, podras seguir estos pasos y no tener que usar superoneclick, en mi opinion esto es mas facil.
Pruebalo cuando puedas!
brucezyc said:
Hi there,
May I know if there is a way to switch from CWM recovery to TWRP? I tried to simply flash the zip for TWRP but then my bravo won't start...
Thanks.
Click to expand...
Click to collapse
I try doing it too but no success, I think you should flash first a custom rom, then you will be able to flash touch recovery and it will for sure work.
I will let know about some test I make!

I'll be honest, I didn't try it, but it will work. That's really not a bad idea and would work with any phone Gingerbreak works on....You should release that in Android General.
I would use it, I'm just too lazy to flash an sbf and then set my phone back up again. I'm happy with my Bravo for the moment...and its my onlyl phone...That really is a simple, yet useful, solution.

gracias
josuearisty said:
Voy a hacer guias en español para cada thread que he creado
Esto es para si algo te ha salido mal y tu telefono no quiere iniciar quedandose solamente en el logo de moto y tienes que por desgracia FLASHEAR el SBF de Froyo con RSD LITE.
Entonces despues que estes en Froyo, podras seguir estos pasos y no tener que usar superoneclick, en mi opinion esto es mas facil.
Pruebalo cuando puedas!
I try doing it too but no success, I think you should flash first a custom rom, then you will be able to flash touch recovery and it will for sure work.
I will let know about some test I make!
Click to expand...
Click to collapse
Oooo muchas gracias amigo voy a probar que suerte q hablas español estoy aprendiendo muchas cosas contigo amigo josuearisty... saludos

oh no, i'm not unglug my phone after install Install Gingerbreak & 2ndInitDefy, then i click Gingerbreak to root
and now it's not on (, just have logo motorola
help me
now i'm ok, i wipe data, cache and do it again
but i dont click root on Gingerbreak , but on my phone still have superuser icon ? it success or not
i used superoneclick to root, but not success after i installed Gingerbreak & 2ndInitDefy

skeevy420 said:
I'll be honest, I didn't try it, but it will work. That's really not a bad idea and would work with any phone Gingerbreak works on....You should release that in Android General.
I would use it, I'm just too lazy to flash an sbf and then set my phone back up again. I'm happy with my Bravo for the moment...and its my onlyl phone...That really is a simple, yet useful, solution.
Click to expand...
Click to collapse
I think it is still not that simple, I will post some tips and be more specif.
mataflakitas said:
Oooo muchas gracias amigo voy a probar que suerte q hablas español estoy aprendiendo muchas cosas contigo amigo josuearisty... saludos
Click to expand...
Click to collapse
Siempre mi amigo, cualquier cosa estamos aqui.
kevins547 said:
oh no, i'm not unglug my phone after install Install Gingerbreak & 2ndInitDefy, then i click Gingerbreak to root
and now it's not on (, just have logo motorola
help me
now i'm ok, i wipe data, cache and do it again
but i dont click root on Gingerbreak , but on my phone still have superuser icon ? it success or not
i used superoneclick to root, but not success after i installed Gingerbreak & 2ndInitDefy
Click to expand...
Click to collapse
Maybe you did not follow steps as you should, I think I have to make steps easier to understand, so that noobs and advanced users can do it all.
Thanks for trying!

when unglug the phone from Pc, the box USB debugging is tick in or not ?

kevins547 said:
when unglug the phone from Pc, the box USB debugging is tick in or not ?
Click to expand...
Click to collapse
Of course it has to be enable.
Else it is not going to work.

gracias
josuearisty said:
Of course it has to be enable.
Else it is not going to work.
Click to expand...
Click to collapse
amigo podra subir un video para saber con mayor facilida como se hace y las instrucciones en español bueno tambien para ingles claro... creo que novatos como yo ...avemos muchos en este foro y estariamos muy agradecicdo con usted amigo josuearisty ...
oye amigo otra duda que pasa si mi pc tiene adb instalado.... puede ocacionar un error en mi motorola bravo ...?
otra duda por que cuando baje su archivo mi pc me lo detecto como un virus...

mataflakitas said:
amigo podra subir un video para saber con mayor facilida como se hace y las instrucciones en español bueno tambien para ingles claro... creo que novatos como yo ...avemos muchos en este foro y estariamos muy agradecicdo con usted amigo josuearisty ...
oye amigo otra duda que pasa si mi pc tiene adb instalado.... puede ocacionar un error en mi motorola bravo ...?
otra duda por que cuando baje su archivo mi pc me lo detecto como un virus...
Click to expand...
Click to collapse
Esta semana estare algo ocupado, el video creo que lo hare la semana que viene.
Usar el adb del archivo no te va a ocasionar ningun problema, ni a tu telefono ni a la computadora.
La aplicacion gingerbreak tiene un exploit dentro y los antivirus lo identifican como un virus, solo desactivalo si lo vas a usar.
--------------------------------------------------------
If you have adb installed on your pc, using this one will cause no problem to the phone or your pc.
Your antivirus detects gingerbreak as a virus because of an exploit command inside the apk file, you can deactivate your antivirus and use it with no problem, no risk with it.

I'll add, s1c/rage against the cage/gingerbreak all show up as viruses because they are. Not kill you PC virus, but virus none the less. Technically they're exploits, but still get picked up by scanners.

Gonna need some testers for LINUX and MAC, when its ready I will you know people!

Working great!. Will flash a Rom right now . Thnx to make our life easier!.

Took a few flashes, but I got there in the end! Great stuff, thanks!!

Worked like a charm. Thanks!!

[Q] How to change boot logo?

Anyone, how to change our boot logo not boot animation? My p6 is from is locked from a local network here in the Philippines and I manage to find a person on ebay that can network unlock so it is unlocked now. Now I want to change the boot logo. I used MIUI rom now. TIA

vncrlsoriano said:
Anyone, how to change our boot logo not boot animation? My p6 is from is locked from a local network here in the Philippines and I manage to find a person on ebay that can network unlock so it is unlocked now. Now I want to change the boot logo. I used MIUI rom now. TIA
Click to expand...
Click to collapse
You may change boot logo only if you will change a location of your phone. replaced oeminfo on fastboot.
I may help you.
Sorry for my bad English...

there is boot animation app in google play ..

SVikFromOrel said:
You may change boot logo only if you will change a location of your phone. replaced oeminfo on fastboot.
I may help you.
Sorry for my bad English...
Click to expand...
Click to collapse
Can you teach me how? I am using MIUI v5 rom and its b116sp01.
TIA!

GalaxySIIII said:
there is boot animation app in google play ..
Click to expand...
Click to collapse
Yeah I tried that but the OEM logo wont change. just boot animation.

vncrlsoriano said:
Can you teach me how? I am using MIUI v5 rom and its b116sp01.
TIA!
Click to expand...
Click to collapse
Go to \data folder with Root Explorer and find custom.bin file, open it by text and write me containt this file.
Attantion!! After change location your phone will have wiped all your data

SVikFromOrel said:
Go to \data folder with Root Explorer and find custom.bin file, open it by text and write me containt this file.
Attantion!! After change location your phone will have wiped all your data
Click to expand...
Click to collapse
can find custom.bin. sorry bout that. Is there a way to have an update.zip file just to flash it or install from sd card using cm recovery? I really want the huawei ascend stock boot logo. Thanks again.

vncrlsoriano said:
can find custom.bin. sorry bout that. Is there a way to have an update.zip file just to flash it or install from sd card using cm recovery? I really want the huawei ascend stock boot logo. Thanks again.
Click to expand...
Click to collapse
Download attached file. unzip and put update.app file in to DLOAD folder in your external SD Card.
back up your data.
hold the volume button up + down + power button.
After flashing go to stock recovery (not CWM) and do Wipe data and Wipe cache.
View attachment Vendor+channel_neeurope.rar

vncrlsoriano said:
Anyone, how to change our boot logo not boot animation? My p6 is from is locked from a local network here in the Philippines and I manage to find a person on ebay that can network unlock so it is unlocked now. Now I want to change the boot logo. I used MIUI rom now. TIA
Click to expand...
Click to collapse
The bootlogo can be changed but u need a rooted device, here are the steps:
1. Root your device
2. Install rootbrowser from the playstore
3. Start rootbrowser and navigate to "data" than locate "custom.bin"
4. Inside "custom.bin" there will be a line of text in my "dt/mk", which shows the default cust profile
5. Now go back from the "folder" and locate "cust" and inside locate the folder which was specified in "custom.bin"
6. Two levels inside that folder there will be a "boot" folder, inside it will be the boot animation
7. Just delete the boot animation file and add your custom one
8. Do a Factory reset

SVikFromOrel said:
Download attached file. unzip and put update.app file in to DLOAD folder in your external SD Card.
back up your data.
hold the volume button up + down + power button.
After flashing go to stock recovery (not CWM) and do Wipe data and Wipe cache.
View attachment 2341528
Click to expand...
Click to collapse
Ok I already did that but still Im getting the globe carrier boot logo. Is the attach file is just to see my custom.bin? or this is to changed the boot logo?

vncrlsoriano said:
Ok I already did that but still Im getting the globe carrier boot logo. Is the attach file is just to see my custom.bin? or this is to changed the boot logo?
Click to expand...
Click to collapse
This attach file change your location in file custom.bin, but after wipes will be changed your bootlogo too.
This patch only for P6-U06.
---------- Post added at 06:19 PM ---------- Previous post was at 06:12 PM ----------
btodorce said:
The bootlogo can be changed but u need a rooted device, here are the steps:
1. Root your device
2. Install rootbrowser from the playstore
3. Start rootbrowser and navigate to "data" than locate "custom.bin"
4. Inside "custom.bin" there will be a line of text in my "dt/mk", which shows the default cust profile
5. Now go back from the "folder" and locate "cust" and inside locate the folder which was specified in "custom.bin"
6. Two levels inside that folder there will be a "boot" folder, inside it will be the boot animation
7. Just delete the boot animation file and add your custom one
8. Do a Factory reset
Click to expand...
Click to collapse
boot animation is not boot logo. when you turn on your phone, at first you see boot logo, then go bootanimation.

Ok, I am doing a wipe data now using android recovery. note that I am using MIUI as rom. is it alright?

vncrlsoriano said:
Ok, I am doing a wipe data now using android recovery. note that I am using MIUI as rom. is it alright?
Click to expand...
Click to collapse
I don't know how it will be with MIUI... I do this only on official ROM.

ok .. bootanimation change is not problem .. now bootlogo - oemlogo ... I will try later the way I change my bootlogo on G300 - create oemlogo.zip and flash it in TWRP

I am also interested on chnging boot logo (not bootanimation, this one is easy) every time i turn on phone i see logo of my phone carrier and that sucks.
If someone achieve it please tell me how!

You need to do a debranding

ZuperStyler said:
You need to do a debranding
Click to expand...
Click to collapse
and how we can do that on P6? some tool?

same here on my huawei g526 L11.
vncrlsoriano said:
Ok I already did that but still Im getting the globe carrier boot logo. Is the attach file is just to see my custom.bin? or this is to changed the boot logo?
Click to expand...
Click to collapse
Still globe oem logo appears. but bootanimation has changed, no matter how hard I tried still cant delete globe logo
---------- Post added at 10:19 AM ---------- Previous post was at 10:14 AM ----------
hi we have same problemI want to delete or change my splash screen and want to change it to huawei logo, but sad thing no matter how I tried applied procedures from other site like modacco still globe is booting in my scree, I tried to flash oemlogo still no luck. I locate the cust.bin so it was stated there the folder of globe/ph bootanimation is changed not globe logo:crying:

Cambiar Boot logo con exito P6
Source: h t t p:// bbs. aijikong.com / thread-142774-1-1. html "Sin espacios"
Edit (DDanielGT)
Después de buscar y casi rendirme finalmente encontré en el foro chino con la solución para poner el logo inicial de Huawei en mi P6 , Espero les funcione a ustedes también.
Herramientas:
1, Root
2, Terminal Emulator (o similar)
3 Es File explore con permisos root (o similar pero que sea explorador con permisos root)
Pasos:
En file explore:
1, / cust / hw / / oemlogo.mbn, este documento es la primera pantalla de archivo nativo de Huawei, copiarlo y pegarlo en el folder de su operadora directorio normal: dispositvo / logo cust / su compañía / cn / logo
Por ejemplo, / cust / CMCC / cn / logo / (((adentro de la carpeta logo pegar el archivo oemlogo.mbn)))
2, y luego, con un editor de texto modificar /data/custom.bin, el interior del archivo agregar una letra más al final para cambiar la línea de texto.
Por ejemplo, el original es CMCC / cn, convirtiéndolo en CMCC / cnx, a continuación, guardar.
3 y, a continuación, iniciar HyperTerminal
Ingrese antes introduce su para obtener privilegios de root;
A continuación, introducir load_oemlogo (luego presionar enter), con esto se modificara el logo inicial por el de huawei.
Si no ha cambiado el custom.bin paso 2, al introducir load_oemlogo se ejecutara al instante y la sustitución no tendra exito .
Si al ingresar load_oemlogo funciona por un tiempo y pareciera el el terminal emulator no responde esperar hasta el final, y finalmente ejecutara el comando, lo que indica el éxito. pero continuar el paso 4 (si lo omiten se puede reiniciar de fabrica el teléfono y es molesto )
4, Repetir el paso dos quitando las letras adicionales que se colocaron y guardar nuevamente el archivo.
5, reinicie el teléfono
Este método me funciono y ahora ya tengo el logo original del ASCEND P6!!
Espero les funione.

DDanielGT said:
Source: h t t p:// bbs. aijikong.com / thread-142774-1-1. html "Sin espacios"
Edit (DDanielGT)
Después de buscar y casi rendirme finalmente encontré en el foro chino con la solución para poner el logo inicial de Huawei en mi P6 , Espero les funcione a ustedes también.
Herramientas:
1, Root
2, Terminal Emulator (o similar)
3 Es File explore con permisos root (o similar pero que sea explorador con permisos root)
Pasos:
En file explore:
1, / cust / hw / / oemlogo.mbn, este documento es la primera pantalla de archivo nativo de Huawei, copiarlo y pegarlo en el folder de su operadora directorio normal: dispositvo / logo cust / su compañía / cn / logo
Por ejemplo, / cust / CMCC / cn / logo / (((adentro de la carpeta logo pegar el archivo oemlogo.mbn)))
2, y luego, con un editor de texto modificar /data/custom.bin, el interior del archivo agregar una letra más al final para cambiar la línea de texto.
Por ejemplo, el original es CMCC / cn, convirtiéndolo en CMCC / cnx, a continuación, guardar.
3 y, a continuación, iniciar HyperTerminal
Ingrese antes introduce su para obtener privilegios de root;
A continuación, introducir load_oemlogo (luego presionar enter), con esto se modificara el logo inicial por el de huawei.
Si no ha cambiado el custom.bin paso 2, al introducir load_oemlogo se ejecutara al instante y la sustitución no tendra exito .
Si al ingresar load_oemlogo funciona por un tiempo y pareciera el el terminal emulator no responde esperar hasta el final, y finalmente ejecutara el comando, lo que indica el éxito. pero continuar el paso 4 (si lo omiten se puede reiniciar de fabrica el teléfono y es molesto )
4, Repetir el paso dos quitando las letras adicionales que se colocaron y guardar nuevamente el archivo.
5, reinicie el teléfono
Este método me funciono y ahora ya tengo el logo original del ASCEND P6!!
Espero les funione.
Click to expand...
Click to collapse
tks m8! for sharing, but would appreciate if anybody could translate it in understandable english as i tried on google translate and after translation it gets even harder to understand!
WBR

Problem with preinstalled Spotify app

Hey
My friend has bought a new phone xa1 ultra. He has preinstalled Spotify in his software. Is it possible to flash some stock firmware without is preinstalled? Where can i get such a software and how to flash it - by flashtool?

I know what you want to do, I resolved with a cloning app. Now I don't remember the name... Like appcloner or something like that, try to find on Google play

SPLT said:
I know what you want to do, I resolved with a cloning app. Now I don't remember the name... Like appcloner or something like that, try to find on Google play
Click to expand...
Click to collapse
puedes ocultar las aplicaciones que quieras incluso del sistema por comandos ADB o para mas facil instalar una app mod de spotify que no interfiere con la original.

Necesito ayuda para cambiarle la rom a mi telefono MotoG7 Play/I need help changing the rom on my MotoG7 Play phone

Hola, quiero cambiarle la rom a mi telefono por una mas mejor, pero no encuentro la version de twrp para el telefono, ademas eh intentado aplicarle root pero no he tenido exito, cualquier ayuda o sugerencia es bienvenida.
Hello, I want to change the rom on my phone for a better one, but I can't find the twrp version for the phone, also I've tried to apply root but I haven't been successful, any help or suggestion is welcome.

Mystery Mx said:
Hola, quiero cambiarle la rom a mi telefono por una mas mejor, pero no encuentro la version de twrp para el telefono, ademas eh intentado aplicarle root pero no he tenido exito, cualquier ayuda o sugerencia es bienvenida.
Hello, I want to change the rom on my phone for a better one, but I can't find the twrp version for the phone, also I've tried to apply root but I haven't been successful, any help or suggestion is welcome.
Click to expand...
Click to collapse
Install DevCheck
https://play.google.com/store/apps/details?id=flar2.devcheck
DevCheck/system/
What is listed as Device and Product?

sd_shadow said:
Install DevCheck
https://play.google.com/store/apps/details?id=flar2.devcheck
DevCheck/system/
What is listed as Device and Product?
Click to expand...
Click to collapse
Esto es lo que me aparece
This is what appears to me

sd_shadow said:
Install DevCheck
https://play.google.com/store/apps/details?id=flar2.devcheck
DevCheck/system/
What is listed as Device and Product?
Click to expand...
Click to collapse
Esto es lo que me aparece
This is what appears to me

Mystery Mx said:
Esto es lo que me aparece
This is what appears to me
Click to expand...
Click to collapse
Yes so you are looking for TWRP for "channel" which is you device's codename

sd_shadow said:
Yes so you are looking for TWRP for "channel" which is you device's codename
Click to expand...
Click to collapse
¿Descargo la version channel de TWRP?
Me aparecio la version TWRP river para el G7 normal, ¿me puede servir esa?
Did you download the channel version of TWRP?
The TWRP river version appeared for the normal G7, can that help me?

Mystery Mx said:
¿Descargo la version channel de TWRP?
Me aparecio la version TWRP river para el G7 normal, ¿me puede servir esa?
Did you download the channel version of TWRP?
The TWRP river version appeared for the normal G7, can that help me?
Click to expand...
Click to collapse
Ya di con la versión correcta de twrp, es esa la que dijiste, pense que era un error en la traduccion ya que uso el traductor de google, no se ingles
I already found the correct version of twrp, is that the one you said, I thought it was an error in the translation since I use the google translator, I don't know English

Mystery Mx said:
Ya di con la versión correcta de twrp, es esa la que dijiste, pense que era un error en la traduccion ya que uso el traductor de google, no se ingles
I already found the correct version of twrp, is that the one you said, I thought it was an error in the translation since I use the google translator, I don't know English
Click to expand...
Click to collapse
Surgio un problema, instale el twrp channel pero cuando intento acceder desde el telefono, este hace bootloop, despues de 3 reinicios vuelve a iniciar normal, tengo que iniciarlo desde el pc ya que no puedo desde el telefono
A problem arose, I installed the twrp channel but when I try to access from the phone, it does bootloop, after 3 reboots it starts again normally, I have to start it from the pc since I can't from the phone

Question security test error no root

I have an error in the CTS profile match that gives me an error and I have not rooted the mobile...the support team tells me that it is not your original room...and I changed from room cn to room eu.... the McDonald's app doesn't work for me because of that..any solution to fix it without root?

jaimele said:
I have an error in the CTS profile match that gives me an error and I have not rooted the mobile...the support team tells me that it is not your original room...and I changed from room cn to room eu.... the McDonald's app doesn't work for me because of that..any solution to fix it without root?
Click to expand...
Click to collapse
Root it then..lol

Decrypted data, flashed modified super.img that is r/w with modified fstab, deleted some system apps, flashed 676.22 system drivers, gpu undervolted and slight overclocked to 692 mhz, twrp recovery, magisk and still I pass

Also didn't you flash custom recovery? Maybe because bootloader unlocked.. Not sure As soon as I received my device I unlocked bootloader and rooted.

JWnSC said:
No flasheé nada, solo recibió el terminal con la sala CN y lo cambió a través de la configuración y actualicé el archivo eu original de la sala ... y luego reinicié el móvil con el botón y el botón apagar - y me sale bloqueo del gestor de arranque. ..
Click to expand...
Click to collapse
Así que no sé por qué me sale ese error.

jaimele said:
Así que no sé por qué me sale ese error.
Click to expand...
Click to collapse
Reflash firmware to see if issue persist.

Just root it and bypass safteynet once and for all and free your device from 3rd party handcuffs and this type of nonesense. You own your device, not them.

No quiero rootearlo todavía... es difícil para mí instalar todas mis aplicaciones... incluso si hago una copia de seguridad, no copia todos los datos de todas las aplicaciones si no está rooteado

jaimele said:
No quiero rootearlo todavía... es difícil para mí instalar todas mis aplicaciones... incluso si hago una copia de seguridad, no copia todos los datos de todas las aplicaciones si no está rooteado
Click to expand...
Click to collapse
Hmm.. Well if you find out why it won't pass safety net even though your not rooted please let us know. I don't see how a stock device wouldn't pass it.. Like I say before, I think your bootloader being unlocked is affecting it.

Your bootloader is unlocked, that's why you're getting the error. Either install Magisk and patch the error, or go back to your original ROM and relock your bootloader (of course, without root, otherwise your smartphone won't work anymore).

Mitesoro said:
Su cargador de arranque está desbloqueado, por eso está recibiendo el error. Instale Magisk y corrija el error, o vuelva a su ROM original y vuelva a bloquear su cargador de arranque (por supuesto, sin root, de lo contrario su teléfono inteligente ya no funcionará).
Click to expand...
Click to collapse
It does not have root... Its original rom, I don't even know what it is... Last time I downloaded the one that came from the Red Magic website on 4.28 Europe/Asia and it doesn't work... I even installed a 3.18 version and it It left the phone useless and I had to format data..

As I have also seen, changing the text payload properties, deleting the "_un" file, it is configured to the global room, but of course I don't know if it is clean and it will continue with the error...

jaimele said:
It does not have root... Its original rom, I don't even know what it is... Last time I downloaded the one that came from the Red Magic website on 4.28 Europe/Asia and it doesn't work... I even installed a 3.18 version and it It left the phone useless and I had to format data..
Click to expand...
Click to collapse
Is OEM unlocking enabled on your device and you're unable to turn it off? If so, then your smartphone is unlocked, and you need to lock it; otherwise, the error will persist.
[ fastboot flashing unlock ] for unlocking bootloader
[ fastboot flashing lock ] for locking bootloader

The phone has the oem disabled so the bootloader is not unlocked...it is a super rare case. I understand a lot about this type of thing and it has never happened to me, but I will need a specific file to fix in a non-root way, I don't want to root it. I know that with magisk I fix it, but in this case it's a bug in the original room, the safetynet application detects it as if it was tricked

jaimele said:
The phone has the oem disabled so the bootloader is not unlocked...it is a super rare case. I understand a lot about this type of thing and it has never happened to me, but I will need a specific file to fix in a non-root way, I don't want to root it. I know that with magisk I fix it, but in this case it's a bug in the original room, the safetynet application detects it as if it was tricked
Click to expand...
Click to collapse
"Okay, that's really stupid. I thought maybe it would be the same mistake as mine. Maybe just open BL once and then close it again "

Mitesoro said:
"Okay, that's really stupid. I thought maybe it would be the same mistake as mine. Maybe just open BL once and then close it again "
Click to expand...
Click to collapse
I don't know what your problem is...

jaimele said:
The phone has the oem disabled so the bootloader is not unlocked...it is a super rare case. I understand a lot about this type of thing and it has never happened to me, but I will need a specific file to fix in a non-root way, I don't want to root it. I know that with magisk I fix it, but in this case it's a bug in the original room, the safetynet application detects it as if it was tricked
Click to expand...
Click to collapse
I am confused. Have you installed a new ROM or not?
You said you changed from "cn" to "eu". You said one ROM left the phone unusable. You must have "flashed" a new ROM, several times. Maybe the problem is that the original ROM's identity is somehow known, and anything else will cause this mismatch. Try restoring the "cn" ROM.
Mostly out of curiosity: Have you enabled Developer Options? Do they show any kind of entry for "OEM unlock", even if greyed-out?
Maybe you should install one of the idiot "root checkers", like Momo or TBChecker. You might get a more detailed explanation of what it doesn't like, which *might* be related to what is making "CTS Profile" not pass.

J.Michael said:
Estoy confundido. ¿Has instalado una nueva ROM o no?
Dijiste que cambiaste de "cn" a "eu". Dijiste que una ROM dejó el teléfono inutilizable. Debe haber "flasheado" una nueva ROM, varias veces. Tal vez el problema es que la identidad de la ROM original se conoce de alguna manera, y cualquier otra cosa causará esta falta de coincidencia. Intenta restaurar la ROM "cn".
Principalmente por curiosidad: ¿Ha habilitado las Opciones de desarrollador? ¿Muestran algún tipo de entrada para "Desbloqueo OEM", incluso si están en gris?
Tal vez deberías instalar uno de los tontos "verificadores raíz", como Momo o TBChecker. Es posible que obtenga una explicación más detallada de lo que no le gusta, que *podría* estar relacionado con lo que hace que el "Perfil CTS" no pase.
Click to expand...
Click to collapse
If l change from rom uncommon to eucomon and it works correctly but does not pass the cts profile. The oem is grayed out and the bootloader is locked.

jaimele said:
If l change from rom uncommon to eucomon and it works correctly but does not pass the cts profile. The oem is grayed out and the bootloader is locked.
Click to expand...
Click to collapse
I thought you said that you started with "cn" and changed to "eu". I'm saying maybe that's what's wrong. Maybe the device somehow identifies itself as "naturally cn", so if it is not "cn", and you are not using a Magisk module to "spoof" its properties, it fails CTS Profile.
Even if you don't want to install Magisk, you might gain some insight by reading in the Magisk thread. I'm not sure what affects CTS Profile.

J.Michael said:
Pensé que dijiste que comenzaste con "cn" y cambiaste a "eu". Estoy diciendo que tal vez eso es lo que está mal. Tal vez el dispositivo de alguna manera se identifique como "naturalmente cn", por lo que si no es "cn", y no está utilizando un módulo Magisk para "falsificar" sus propiedades, falla el perfil CTS.
Incluso si no desea instalar Magisk, puede obtener información leyendo el hilo de Magisk. No estoy seguro de qué afecta al perfil CTS.
Click to expand...
Click to collapse
Pero antes recuerdo que funcionaba sin ser cn