[Q] error in flashing RCMixHD v3.6.1 D2EXT Rom - Desire Q&A, Help & Troubleshooting

Before I used CM7 stable rom.
As I want to use data2ext, thus i flashed to RCMixHD v3.6.1 D2EXT Rom. But i got a problem after reboot the system. I have had wipe all cache, why still got an error ?? many apps are forced to close.......what happens??

Be more specific.
What kind of error? Boot error?
Application error?
It helps to know "exactly" what happened.

after flashed Rom, I rebooted system.
It can be entered the first screen of HTC sense. But when i unlock the screen, it is looped to load setting.
I also cannot used the home button and cannot go to any apps. It will be forced to close.

WIPE everything... not just cache, but system/cache/sdext/dalvik cahce (factory reset).
Then flash the ROM.
And make sure your SD Card is partitioned as recommended in the RCMixHD thread.

yes....I already wipe everything...
my SD card have also partitioned into FAT32+EXT3+EXT3+SWAP
but it also cannot be normal for my flashing

Recommended partitions are ext4, but i don't think that will be the problem. What Recovery do you have?

the system will auto change ext3 to ext4 for running the script.
Recovery???.....what do you mean that?

BTW, flash the ROM and after flash this fix:
http://rom.tat.tw/desire/Fix/bootHD.zip
Recovery: CWM x.x.x.x or AmonRA x.x.x ?

you mean the ClockworkMod 2.5.0.7 ???

Try downloading again: http://rom.tat.tw/desire/RCMixHD/v3.6/
Check if the size is correct. It MUST work with CWM 2.5.0.7 and your SD Card setup.
If not. Try this : http://www.multiupload.com/C8Y4YPOFC0

i tried..it also cannot be worked........

does anyone know whether there is/will be a A2SD version of 3.6.1?
The latest A2SD is only 3.0 =/.

Related

[Q] Rom installation problems

I'm hoping someone can help me with rom installation problems, I have reached a stalling
point and have not found a similar problem in the forums.
My phone is an SCLD Desire, pvt3, rooted and s-offed, cwm 3.0.0.5, radio
32.49.00.32U_5.11.05.27. The SD card is a transcend 8Gb class 6 with a 1.5Gb ext4
partition, formatted with gparted. Stock hboot.
I have so far tried to load both RcMix InsertCoin A2SD versions with no success.
I am following the instructions for both Roms to the letter;
1. Wipe data
2. wipe cache partition
3. wipe dalvik cache
4. reboot recovery
5. install rom from sd card
Both roms tell me that they have loaded successfully from zip, then I reboot the system.
Both start to load, show their respective logos and then do the following:
InsertCoin will get me to the sim unlock screen, I unlock the sim and screen says loading,
then I get to a screen with wallpaper, notification bar and sense bar, but no icons or widgets.
When the screen times out and I wake it, I get wallpaper and notification bar only.
The phone will not even power down.
RcMix starts to load, shows the rcmix animated logo for a while, then the logo ceases
its animation. If the screen dims and I wake it, it shows the static rcmix logo only.
I have left the phone alone for over a half an hour on each attempt to see if the roms
would load successfully.
I use Ubuntu and have found that I cannot transfer files to and from the ext4 partition. I get a permission denied every time I try. I'm not sure if this is normal or not.
Can anyone please help , this is driving me nutz.
Thank you.
I see the problem. Your radio is too old, flash the latest one
merizim said:
(...)
1. Wipe data
2. wipe cache partition
3. wipe dalvik cache
4. reboot recovery
5. install rom from sd card
(...)
Can anyone please help , this is driving me nutz.
Thank you.
Click to expand...
Click to collapse
I think it has nothing to do with the radio. You just forgot to wipe /system, too. Do this and try to flash again.
MatDrOiD said:
I think it has nothing to do with the radio. You just forgot to wipe /system, too. Do this and try to flash again.
Click to expand...
Click to collapse
I had same radio+ same problem
Not saying it without reason, but if you wipe ALL USERDATA? it's the same right? and i forgot to see that one But anyway if that doesn't work it's most likely the radio
Yes you are right. It's the same. We'll see what helps.
Swyped from my HTC Desire using XDA App
Updated Radio
I've upgraded to the latest radio version 5.17.05.23 and tried again, making sure everything was wiped. The installation gets further than last time and after a couple of reboots I get the setup screen but there is no keyboard to input the details, and sense constantly force closes. There was also no sim unlock screen. When I tried to shut down the phone it went into a bootloop.
I will try another install to verify.
Tried fresh install again but am getting partially loaded rom: sense ui is working but force closes on any interaction, when I tried to go to settings it says "the linked program is no longer on your phone", no sim unlock screen, no keyboard. Bootlooped again on powering down.
I read some where in XDA forum that the CWM 3.0xxx is buggy.
Try to use CWM 2.5.0.7 and see.
Sent from my HTC Desire
It seems like a silly question, do you have an ext partition? If not make one with gparted, or use AmonRa recovery(that is able to partition you sd), i find it much better than CWM
If you already have an ext partition is it 1GB?
merizim said:
I'm hoping someone can help me with rom installation problems, I have reached a stalling
point and have not found a similar problem in the forums.
My phone is an SCLD Desire, pvt3, rooted and s-offed, cwm 3.0.0.5, radio
32.49.00.32U_5.11.05.27. The SD card is a transcend 8Gb class 6 with a 1.5Gb ext4
partition, formatted with gparted. Stock hboot.
I have so far tried to load both RcMix InsertCoin A2SD versions with no success.
I am following the instructions for both Roms to the letter;
1. Wipe data
2. wipe cache partition
3. wipe dalvik cache
4. reboot recovery
5. install rom from sd card
Both roms tell me that they have loaded successfully from zip, then I reboot the system.
Both start to load, show their respective logos and then do the following:
InsertCoin will get me to the sim unlock screen, I unlock the sim and screen says loading,
then I get to a screen with wallpaper, notification bar and sense bar, but no icons or widgets.
When the screen times out and I wake it, I get wallpaper and notification bar only.
The phone will not even power down.
RcMix starts to load, shows the rcmix animated logo for a while, then the logo ceases
its animation. If the screen dims and I wake it, it shows the static rcmix logo only.
I have left the phone alone for over a half an hour on each attempt to see if the roms
would load successfully.
I use Ubuntu and have found that I cannot transfer files to and from the ext4 partition. I get a permission denied every time I try. I'm not sure if this is normal or not.
Can anyone please help , this is driving me nutz.
Thank you.
Click to expand...
Click to collapse
Flash RaRecovery. Do full wipe, reinstall rom. I use RCMix for months and don't have any issues.
It gets stranger???
In reply to previous posts:
Firstly thank you all for your suggestions.
Genie4all:
There is a post which says that cwm 2.5.?? does not handle ext4 and recommends cwm 3.0.0.5, I was previously on 2.5.?? and was getting the same problem.
TopGear63z:
Yes I have a 1.5Gb ext3, previously ext4 partition
I thought I would see if changing from ext4 to ext3 would make any difference, also ran melethron's alignment script before reinstalling RcMix again. It made no difference.
However I also decided to try LeeDroid 3.0.8 and it loaded and ran perfectly.
This is making so sense (no pun intended) now, after all there should be no difference in the way a rom is loaded on a stock hboot. Could it be that LeeDroid is Sense 1 and the others are 1.9/2.1/30 hybrids?
Would AmonRa recovery really make a difference?
Any other suggestion would be greatly appreciated as I really want to experience those new sense 3.0 goodies.
Thanks.
Resize your ext partition to 1GB with gparted see if that work.and also try to flash it with amonra i read it somewhere on rcmix thread that this rom works great with amonRa though i flashed this rom on both cmw and amonra without any issue.
which rom version did you tried bravo or cm7?
I had the partition at 1Gb previously but in linux it reported only 974Mb free, journalling took the rest so then I decided to resize to 1.5Gb to ensure that at leat 1Gb was free.
I've been trying the Bravo versions of both Roms. Now I think it's time to try Ra recovery and see if that works, I'll report back on the results.
Thanks
if that don't work then change your partition to cm7r2 and flash the cm-7 version and Rcmix cm7 version is fast and smoother than bravo.
You know that 1GB is not the least, it's recommended maximum, you should at least have 512mb to let the rom work. I have 1.1GB ext and no problems but i had when i used 1.8GB, so i actually think that's the problem. Only if it still doesn't work after using AmonRa's recovery ofcourse
I'm on RcMix with ext4 and CWM 2.5 and it works like charm.
Try formatting your card to FAT32 and use gparted to create a 1gb ext portion at the end and try.
Also do a full wipe.
Sent from my HTC Desire
1.5 gb ext3 is really good and will make no problem.. it might be caused by bad mounting the ext3 partition... go to applications then Manage Applications and see if any grey applications there...
Solved
Changed my recovery to AmonRa 2.0.1 as suggested and am now running RcMix successfully.
Thank you all for your help and suggestions.

[Q] Boot Loop after flashing ROM

Hi guys,
I know that there are many threads about this topic, but no one of them helped me to find a solution for my problem. I hope somebody of you can give me the right advise how i can fix my phone.
These are the steps I did:
- Unrevoked Root
- AlphaRev S-OFF
- Installed Bravo CM7 r2 (by doing wipes in recovery-mode and install PB99IMG_cm7r2.zip)
Now I wanted to install one of these ROMs:
[ROM] Aurora v02
[ROM]Cool3D Sense 3.0
I proceeded like it is described everywhere. I choosed "Wipe data/factory reset" and "Wipe Davik" and then clicked on "Flash zip from sdcard" and choosed the zip.
However, my phone will stuck in a "quietly brilliant" loop. I proceeded a few times without success.
What did i do wrong?
You need 1gb ext4 partition on SD Card.
Repartition your SD, wipe everything and reflash again.
Sent from my HTC Desire using XDA App
What Hboot you have?
Usually roms have two versions - stock and alternative hboot version
If you have stock hboot table use stock rom
Yes all you need is to download the right version of the rom cool3d CM7 r2, partition your sd with first FAT32 and the second EXT4 partition. 1gb EXT4 is enough. then wipe everything and flash your rom. then boot the rom set it up, restart it and flash app2sd (stockusers.zip from coolexe), don't flash a2sd right after the rom!!
iga2iga said:
Yes all you need is to download the right version of the rom cool3d CM7 r2, partition your sd with first FAT32 and the second EXT4 partition. 1gb EXT4 is enough. then wipe everything and flash your rom. then boot the rom set it up, restart it and flash app2sd (stockusers.zip from coolexe), don't flash a2sd right after the rom!!
Click to expand...
Click to collapse
Do what he says and it will work...
If you want even more space, then flash Bravo CM r2 hboot from alpharev...
Remember to update your radio also...
There is some small bugs in the ROM, but they are easy to fix
Sorry, just to add if you are on cm r2, you may flash the rom, run it, set it up, and then reboot and flash a2sd.kd.zip it will move dalvik cache to sd-ext, as i understand his roms for cm r2 contain a2sd from the start. so you get all aps on sd-ext and also dalvik on sd-ext.

[Q] com.android.phone AceS v3

Hi,
I've search on this forum but i didn't find the same problem i have.
My device is a HTC Desire S-Off CM7r2
My SdCard is formatting like this : 1024Mo Ext4 /// 2976 Mo Fat32
I wanted to try the AceS v3 (ginger 2.3.5 + sense 3.0) so i cleaned my SD card, then i made a full wipe in the recovery (AmonRA) and then i flashed the Rom.
When i rebooted my device, i was on the parameter screen (the first screen after flashing a rom) and i had a pop-up who said 'the process com.android.phone has stop...' i push on 'Ok' and the message came back 2 or 3 seconds later, without stoping. I rebooted my device once, nothing changed.
I rebooted into recovery and did the same, full wipe then reflash. Still the same problem.
So i ran my nanbackup and came back on my CyanogenMod7 and i didn't have this problem.
If someone have a solution or an idea about this problem i could be really helpfull to try AceS's rom
Wipe davlik,data,cache.. wipe all! And try to flash the Rom again.
How did you partition your SD card? With gparted or recovery? Did you flash the right version of AceSMod (so the one, which corresponds with your hboot)?
Did u make full wipe? if yes then retry, flash the rom and then just flash the EXT4 alignement script.
good luck, i am using this rom its realy fast and stable.
@droidmeup i've wiped everything
@MatDrOiD I've partitioned my SDcard with GParted and i've flashed the CM7 r2 version of the ROM
@Psykodali When i flash EXT4 alignement script it gives me a boot loop when i restart
Did you created first fat32 partition and then ext4 partition and were both primary?
SwiftKeyed from dGB using Transparent XDA App
Yes, it's what i've done
Kayvel said:
@Psykodali When i flash EXT4 alignement script it gives me a boot loop when i restart
Click to expand...
Click to collapse
Did you flash this before or after flashing the ROM? This is supposed to be flashed before the rom is flashed.

Stuck at restoring sd-ext after flashing CM7 Nightly

Hello,
I wanted to try CM7 nightly.
I had rooted stock rom 2.29.405.5 with a2sd+ from this thread.
Before flashing cm7 nightly 225 I wiped data/factory reset and wiped cache partition.
Flashed rom and booted normaly.
After that I wanted to restore my nandroid backup..
I wiped cache and data/factory reset.
Then I got an error while restoring /sd-ext!
Tried again by doing the same and wiping dalvik cache.
When the process reached the point when it restores the sd-ext the progress bar got stuck.
(s-off and clockworkmod recovery (CM v.5)
After that I removed the battery and powered the device.
All my apps are not there. Not even the superuser app.
Please what can I do?
I'm having the same issue with my nexus one. any ideas?
What happens if you use advanced restore and restore the,sd ext on its own?
You may need to reformat your ext
Sent from my HTC Desire using XDA App
The recovery would freeze
After a lot of retries I gave up trying to restore it.
I came to the conclusion the sd got corrupted. (Transcend 8GB class 6)
After that a lot of "bad" things happened, such as couldn't mount sd card, had to reflash partition table and a randomly occured USB brick...hopefully with the help of a friend we(mostly he) managed to fix it..I am at a stock rooted rom with s-off now and want to buy a new sd card..
Is there any way to verify that my old microSD has really been corrupted?
I have continued (kind of) the thread here!
With more info and questions.
Thank you for your reply!
I have exact the same problem, but the disadvantage that I can not install any Rom as it freezes when installing. So I'm not able to start the phone as it sticks on "quietly brilliant" screen.
What I have:
- Amoled grooted
- S-OFF mit Alpharev CM7 r2
- HBoot 0.93.1000
- Recovery: CWM 5.0.2.6
- Last Rom: Runny Mede v3
What I tried:
- Restore Nandroid: Freezes on restoring SDEXT (after factory and dalvik wipe)
- Install ROM: Freezes at writing SDEXT or says that it finished but the bar sticks
- Format SD Card, deleted EXT4 partition and remade it with Gparted. Checked it with windows chkdsk and Gparted and it gave me no errors
- Rewrote the partition table to CM7 r2 with a PB99img.zip
- Made a EXT4 partition with CWM
- Changed the SD card with another one (always making a EXT4 partition and formatted in FAT32)
I don't know what else I should do. Please help restoring my Desire!
Could it be a issue of the CWM? As I can not go back to another one, because Fastboot flash doesn't work, I can not test it by myself!
What do you mean fastboot flash doesn't work? Tell me everything
Sent from my HTC Desire using XDA App
In Fastboot menu I can choose only from Bootloader, Reboot, Reboot Bootloader and Power Down. I don't have anything else to choose from.
Klewe said:
In Fastboot menu I can choose only from Bootloader, Reboot, Reboot Bootloader and Power Down. I don't have anything else to choose from.
Click to expand...
Click to collapse
Thats not how fastboot works. Read the adb and fastboot faq in my signature (ignore all adb things, and start at "what is fastboot?")
oh ok, seen it. So I'm gonna try Android Flasher to flash recovery.
To sort out recorvery as source of the issues, which one should I flash? Which one is the most stable?
Personally I am a cwm 2.5.0.7 man.
Got it running again!
Flashed the CWM 5.0.2.0 and everything worked fine again.
It seems that the Clockwork mod 5.0.2.6.111007 of zyonee has a problem with SD-EXT (so it was on mine, don't know if it works on other devices too).

[Q] Sandvoids ICS

Love this rom, but having a problem.
I installed the a2sd script and now when I download certain apps it reboots and stays on boot loop.
I have to pull the battery and go into recovery to restore but the zip is no longer there, it is wiping the zip from the SD card so I have to reinstall it !!!!!
I tried installing the rom without the script but then run into low memory problems.
Any ideas please
essexdroid said:
Love this rom, but having a problem.
I installed the a2sd script and now when I download certain apps it reboots and stays on boot loop.
I have to pull the battery and go into recovery to restore but the zip is no longer there, it is wiping the zip from the SD card so I have to reinstall it !!!!!
I tried installing the rom without the script but then run into low memory problems.
Any ideas please
Click to expand...
Click to collapse
What hboot are you on? Which Sandvold did you install 0.7 or 0.8? What install options did you choose?
On stock hboot:
Do a full wipe (not SD), flash again , choose either stock (a2sd (typical install) or amarullz (custom install)). If you chose a2sd then after install open terminal and type:
su
a2sd install
Yes on move Dalvik-cache
No on move App-data
Yes to reboot
The stock a2sd and the amarullz have been tested stable on stock hboot, there seem to be more issues with CM7r2 hboots.
essexdroid said:
Love this rom, but having a problem.
I installed the a2sd script and now when I download certain apps it reboots and stays on boot loop.
I have to pull the battery and go into recovery to restore but the zip is no longer there, it is wiping the zip from the SD card so I have to reinstall it !!!!!
I tried installing the rom without the script but then run into low memory problems.
Any ideas please
Click to expand...
Click to collapse
What is this particular a2sd script? I am assuming your already created a partition FAT32 (Primary) followed by 1/2 gb ext4 partition beforehand.
Also I never seen anything that deletes the rom in the sd card. Perhaps you are formatting the sd card in recovery.
I would advise to change hboot to stock, do full wipe(wipe/factory reset,wipe cache+dalvik, system, data and sd ext). If you choose custom install, and got sd card class 4 or above, then I recommend you don't go for the stock a2sd, you are much better with Amarullz.
Some things to check :
- check your partitions' alignment (from recovery)
- did you reply 'n' when a2sd script asked you about moving data to sd ?
- did you change your governor to conservative (assuming you're on stock or tobby_d's kernel ?)
I met that kind of behavior usually just after a fresh install when I forgot about 2 last steps mentionned above.
Thanks so much guys for your help.
I was on version 0.7, and with Y to app-data to SD. I have installed version 0.8 and followed all your instructions and all seems well.
Thank you again very much

Categories

Resources