[Q] com.android.phone AceS v3 - Desire Q&A, Help & Troubleshooting

Hi,
I've search on this forum but i didn't find the same problem i have.
My device is a HTC Desire S-Off CM7r2
My SdCard is formatting like this : 1024Mo Ext4 /// 2976 Mo Fat32
I wanted to try the AceS v3 (ginger 2.3.5 + sense 3.0) so i cleaned my SD card, then i made a full wipe in the recovery (AmonRA) and then i flashed the Rom.
When i rebooted my device, i was on the parameter screen (the first screen after flashing a rom) and i had a pop-up who said 'the process com.android.phone has stop...' i push on 'Ok' and the message came back 2 or 3 seconds later, without stoping. I rebooted my device once, nothing changed.
I rebooted into recovery and did the same, full wipe then reflash. Still the same problem.
So i ran my nanbackup and came back on my CyanogenMod7 and i didn't have this problem.
If someone have a solution or an idea about this problem i could be really helpfull to try AceS's rom

Wipe davlik,data,cache.. wipe all! And try to flash the Rom again.

How did you partition your SD card? With gparted or recovery? Did you flash the right version of AceSMod (so the one, which corresponds with your hboot)?

Did u make full wipe? if yes then retry, flash the rom and then just flash the EXT4 alignement script.
good luck, i am using this rom its realy fast and stable.

@droidmeup i've wiped everything
@MatDrOiD I've partitioned my SDcard with GParted and i've flashed the CM7 r2 version of the ROM
@Psykodali When i flash EXT4 alignement script it gives me a boot loop when i restart

Did you created first fat32 partition and then ext4 partition and were both primary?
SwiftKeyed from dGB using Transparent XDA App

Yes, it's what i've done

Kayvel said:
@Psykodali When i flash EXT4 alignement script it gives me a boot loop when i restart
Click to expand...
Click to collapse
Did you flash this before or after flashing the ROM? This is supposed to be flashed before the rom is flashed.

Related

[Q] error in flashing RCMixHD v3.6.1 D2EXT Rom

Before I used CM7 stable rom.
As I want to use data2ext, thus i flashed to RCMixHD v3.6.1 D2EXT Rom. But i got a problem after reboot the system. I have had wipe all cache, why still got an error ?? many apps are forced to close.......what happens??
Be more specific.
What kind of error? Boot error?
Application error?
It helps to know "exactly" what happened.
after flashed Rom, I rebooted system.
It can be entered the first screen of HTC sense. But when i unlock the screen, it is looped to load setting.
I also cannot used the home button and cannot go to any apps. It will be forced to close.
WIPE everything... not just cache, but system/cache/sdext/dalvik cahce (factory reset).
Then flash the ROM.
And make sure your SD Card is partitioned as recommended in the RCMixHD thread.
yes....I already wipe everything...
my SD card have also partitioned into FAT32+EXT3+EXT3+SWAP
but it also cannot be normal for my flashing
Recommended partitions are ext4, but i don't think that will be the problem. What Recovery do you have?
the system will auto change ext3 to ext4 for running the script.
Recovery???.....what do you mean that?
BTW, flash the ROM and after flash this fix:
http://rom.tat.tw/desire/Fix/bootHD.zip
Recovery: CWM x.x.x.x or AmonRA x.x.x ?
you mean the ClockworkMod 2.5.0.7 ???
Try downloading again: http://rom.tat.tw/desire/RCMixHD/v3.6/
Check if the size is correct. It MUST work with CWM 2.5.0.7 and your SD Card setup.
If not. Try this : http://www.multiupload.com/C8Y4YPOFC0
i tried..it also cannot be worked........
does anyone know whether there is/will be a A2SD version of 3.6.1?
The latest A2SD is only 3.0 =/.

[Q] Boot Loop after flashing ROM

Hi guys,
I know that there are many threads about this topic, but no one of them helped me to find a solution for my problem. I hope somebody of you can give me the right advise how i can fix my phone.
These are the steps I did:
- Unrevoked Root
- AlphaRev S-OFF
- Installed Bravo CM7 r2 (by doing wipes in recovery-mode and install PB99IMG_cm7r2.zip)
Now I wanted to install one of these ROMs:
[ROM] Aurora v02
[ROM]Cool3D Sense 3.0
I proceeded like it is described everywhere. I choosed "Wipe data/factory reset" and "Wipe Davik" and then clicked on "Flash zip from sdcard" and choosed the zip.
However, my phone will stuck in a "quietly brilliant" loop. I proceeded a few times without success.
What did i do wrong?
You need 1gb ext4 partition on SD Card.
Repartition your SD, wipe everything and reflash again.
Sent from my HTC Desire using XDA App
What Hboot you have?
Usually roms have two versions - stock and alternative hboot version
If you have stock hboot table use stock rom
Yes all you need is to download the right version of the rom cool3d CM7 r2, partition your sd with first FAT32 and the second EXT4 partition. 1gb EXT4 is enough. then wipe everything and flash your rom. then boot the rom set it up, restart it and flash app2sd (stockusers.zip from coolexe), don't flash a2sd right after the rom!!
iga2iga said:
Yes all you need is to download the right version of the rom cool3d CM7 r2, partition your sd with first FAT32 and the second EXT4 partition. 1gb EXT4 is enough. then wipe everything and flash your rom. then boot the rom set it up, restart it and flash app2sd (stockusers.zip from coolexe), don't flash a2sd right after the rom!!
Click to expand...
Click to collapse
Do what he says and it will work...
If you want even more space, then flash Bravo CM r2 hboot from alpharev...
Remember to update your radio also...
There is some small bugs in the ROM, but they are easy to fix
Sorry, just to add if you are on cm r2, you may flash the rom, run it, set it up, and then reboot and flash a2sd.kd.zip it will move dalvik cache to sd-ext, as i understand his roms for cm r2 contain a2sd from the start. so you get all aps on sd-ext and also dalvik on sd-ext.

Stuck at restoring sd-ext after flashing CM7 Nightly

Hello,
I wanted to try CM7 nightly.
I had rooted stock rom 2.29.405.5 with a2sd+ from this thread.
Before flashing cm7 nightly 225 I wiped data/factory reset and wiped cache partition.
Flashed rom and booted normaly.
After that I wanted to restore my nandroid backup..
I wiped cache and data/factory reset.
Then I got an error while restoring /sd-ext!
Tried again by doing the same and wiping dalvik cache.
When the process reached the point when it restores the sd-ext the progress bar got stuck.
(s-off and clockworkmod recovery (CM v.5)
After that I removed the battery and powered the device.
All my apps are not there. Not even the superuser app.
Please what can I do?
I'm having the same issue with my nexus one. any ideas?
What happens if you use advanced restore and restore the,sd ext on its own?
You may need to reformat your ext
Sent from my HTC Desire using XDA App
The recovery would freeze
After a lot of retries I gave up trying to restore it.
I came to the conclusion the sd got corrupted. (Transcend 8GB class 6)
After that a lot of "bad" things happened, such as couldn't mount sd card, had to reflash partition table and a randomly occured USB brick...hopefully with the help of a friend we(mostly he) managed to fix it..I am at a stock rooted rom with s-off now and want to buy a new sd card..
Is there any way to verify that my old microSD has really been corrupted?
I have continued (kind of) the thread here!
With more info and questions.
Thank you for your reply!
I have exact the same problem, but the disadvantage that I can not install any Rom as it freezes when installing. So I'm not able to start the phone as it sticks on "quietly brilliant" screen.
What I have:
- Amoled grooted
- S-OFF mit Alpharev CM7 r2
- HBoot 0.93.1000
- Recovery: CWM 5.0.2.6
- Last Rom: Runny Mede v3
What I tried:
- Restore Nandroid: Freezes on restoring SDEXT (after factory and dalvik wipe)
- Install ROM: Freezes at writing SDEXT or says that it finished but the bar sticks
- Format SD Card, deleted EXT4 partition and remade it with Gparted. Checked it with windows chkdsk and Gparted and it gave me no errors
- Rewrote the partition table to CM7 r2 with a PB99img.zip
- Made a EXT4 partition with CWM
- Changed the SD card with another one (always making a EXT4 partition and formatted in FAT32)
I don't know what else I should do. Please help restoring my Desire!
Could it be a issue of the CWM? As I can not go back to another one, because Fastboot flash doesn't work, I can not test it by myself!
What do you mean fastboot flash doesn't work? Tell me everything
Sent from my HTC Desire using XDA App
In Fastboot menu I can choose only from Bootloader, Reboot, Reboot Bootloader and Power Down. I don't have anything else to choose from.
Klewe said:
In Fastboot menu I can choose only from Bootloader, Reboot, Reboot Bootloader and Power Down. I don't have anything else to choose from.
Click to expand...
Click to collapse
Thats not how fastboot works. Read the adb and fastboot faq in my signature (ignore all adb things, and start at "what is fastboot?")
oh ok, seen it. So I'm gonna try Android Flasher to flash recovery.
To sort out recorvery as source of the issues, which one should I flash? Which one is the most stable?
Personally I am a cwm 2.5.0.7 man.
Got it running again!
Flashed the CWM 5.0.2.0 and everything worked fine again.
It seems that the Clockwork mod 5.0.2.6.111007 of zyonee has a problem with SD-EXT (so it was on mine, don't know if it works on other devices too).

[Q] stuck at htc logo boot screen

hi guys i recently flash the ext3 alignment.zip from leedroid and after that i got stuck at whith screen with htc logo. when i try to boot up with my sdcard removed, its able to boot up. Also when i plug in another sd card it can boot up too normally. does it mean my sd card is the problem. because when i insert the sdcard to my card reader its able to read the card.
Its a known issue with flashing that zip. How did you partition it in the first place?
You now have to reformat the ext. Best bet, gparted.
rootSU said:
Its a known issue with flashing that zip. How did you partition it in the first place?
You now have to reformat the ext. Best bet, gparted.
Click to expand...
Click to collapse
thanks you for your advice rootSU. i will try to format my sdcard to see if that works. Just in case if it doesnt, i just have to get a new sdcard then??
Just to confirm, even if i'm on Cool3D Runnymede v3 now and used ext4 alignment tool: i got stuck too 1st time, then from Recovery i formatted all parts, wiped dalvik and reinstalled.
I guess issue was the ext4 formatting, which i skipped 1st time.
I just tried to get runnymede running and also I am stuck at the white loading screen. Do i have to format my sd card now? or just try a reinstall?
Daley026,
assuming root + S-OFF, here is what i did:
1. loaded CM7r2 HBOOT (i used Android Flasher from Windows)
2. updated Clockworkmod Recovery 5.0.2.0 (again with AF)
3. from Recovery run the ext4 alignment tool zip
4. formatted all partitions
5. reinstalled RM v3
6. updated kernel to Gingersense dfs havc 0.8c.
Hope it'll work for ya too,
Schar

cm7 and cm7r2 hboot rom won't boot

Hi i am using my desire fir nearly 2 yrs and have flash many roms with all hboot. Now when i'm trying to flash a rom with either cm7 or cm7r2 hboot , the phone won't boot. I have fllow the instruction on this thread http://forum.xda-developers.com/showthread.php?t=1192984 but still the same. can anyone help me to sort it out.
Thanks in advance
What hboot you have now and what is the rom in question?
SwiftKeyed from my HTC Desire using XDA App.
I have the same problem..
I'm trying to use sebastian15's Runnymede 4.8 ROM.
Any ideas?
I flashed the CM7r2 hboot, wiped data, cache, dalvik, rebooted to recovery, flashed ROM, rebooted, now I'm stuck at HTC splash screen.
Yorba said:
I have the same problem..
I'm trying to use sebastian15's Runnymede 4.8 ROM.
Any ideas?
I flashed the CM7r2 hboot, wiped data, cache, dalvik, rebooted to recovery, flashed ROM, rebooted, now I'm stuck at HTC splash screen.
Click to expand...
Click to collapse
I guess you should partition your SD card: the most common is 1gb ext, rest is fat.
I already did that using gparted. 1gb ext4 and rest fat32
Set both partitions primary? Created first FAT and then EXT partition?
SwiftKeyed from dGB with Transparent XDA App
ya both are Set primary partitions . I have created the fat partition first and then ext 4.
rajesh1108 said:
ya both are Set primary partitions . I have created the fat partition first and then ext 4.
Click to expand...
Click to collapse
Same here guys,
CM7r2, 1GB EXT4, 7GBFAT32. Used Aurora 0.41, decided to change to insertacoin as aurora wasn't very stable and looked like partition wasn't working correctly. Pus, EXT4 partition is gone aswell
My sd card isnt readable on Recovery either (recognisable on pc though).
I've tried fastboot oem enable qxdm 0 - Still nothing. Card gives "unable to mount" message. Been at this for 8 hours now....
BUT, when i insert different sd card - seems fine...
vidrom said:
Same here guys,
CM7r2, 1GB EXT4, 7GBFAT32. Used Aurora 0.41, decided to change to insertacoin as aurora wasn't very stable and looked like partition wasn't working correctly. Pus, EXT4 partition is gone aswell
My sd card isnt readable on Recovery either (recognisable on pc though).
I've tried fastboot oem enable qxdm 0 - Still nothing. Card gives "unable to mount" message. Been at this for 8 hours now....
BUT, when i insert different sd card - seems fine...
Click to expand...
Click to collapse
OHHHHHH,
Finally looks like i'm all working.
I had to use my spare sd card to load Oxygen http://forum.xda-developers.com/showthread.php?t=971904
This enabled me to reformat my sd card (that was unrecognisable previously) on my phone - after rebooting the phone twice to recognise the card ( mounting and dismounting).
Card is now back to full capacity of 8GB. I've applied EXT4 1GB again, loaded Insertcoin and it's all GOOD!!!!
In terms of faulty EXT4 - performing fastboot oem enable qxdm 0 seemed to erase all the partitions and bring the card to factory state.
Hope some of you will find it useful.
Good luck to yall and MASSIVE thanks to those posting advice on this forum!!!
The case of vidrom is not the same as mine. see the first post it state clearly that i can't flash rom with cm7 or cm7r2 hboot. nothing to do with card can't recognise. I'm still searching for a solution.
Hey rajesh1108,
Have you tried flashing with Android Flasher ?
http://forum.xda-developers.com/showthread.php?t=794638
I found it to be the easiest way to getting around flashing.
I was once stuck with at boot load and basically redid everything from the beginning using a different guide. Try following this:
http://androidforums.com/desire-all...all-about-rooting-updated-21-july-2011-a.html
Sorry i cant be specific - i'm quite new to all this.
GOOD LUCK!
What rom are you trying to flash?
@vidrom:
Excuse me, but how should your post help the OP?
I solved my problem! Updated my recovery to a new version of Clockwork using ROM Manager.
i'm trying to flash runnymede 4.8.
Yorba which version of recovery are u using. how did u proceed. updated recovery and then flash hboot(cm7r2) and then flash your rom?
I would flash Hboot, recovery and then rom. Are you sure you wiped everything? Created an ext4 partition with at least 512 MB?
ya i have flash the same way you have mention and my ext 4 is 1gb

Categories

Resources