How I flashed my Evo OFF Boost and fixed the MEID - EVO 4G Q&A, Help & Troubleshooting

EDIT: found out that though the method I wrote up here works fine, there is a simpler way. I'm leaving the original post because I learned a lot about my phone in the process and maybe someone else would want to as well.
EASY WAY:
unroot your phone and return to stock: http://forum.xda-developers.com/showthread.php?t=780141
hard reset (from hboot) and it resets everything to stock
when you call in to sprint to activate they will have you do this: ##yourmslcode# and enter your MDN and MSID
BAM!!! you're all done
I bought an Evo on craigslist cheap. The MEID on the phone was good. The one stored IN the phone was not a Sprint MEID. Also, all the settings for MMS, data, etc were changed and unusable on Sprint. The Sprint store told me I was screwed and the local cell store wanted to charge me $100.00 to fix it. I spent close to 20 hours on forums trying to figure out how to fix it. The answers I got were conflicting, and people were generally not helpful with comments like RTFM and accusations of doing illegal stuff. So, I decided I would share what worked for me to save the next guy from the same anguish.
This tutorial will probably suck so don't ***** at me if it does, at least I'm trying to help. Also don't look to me for help or blame me if you break something I AM NOT AN EXPERT. That said here you go:
#1. Download needed software:
HTCDiagDrivers
QPST_2_7_Build355
QXDM31136
#2. Root Phone
Follow this post: http://forum.xda-developers.com/showthread.php?t=838448
(make sure you use a Sense based rom not AOSP)
#3. Get MSL Code
Connect phone to internet via WiFi
Go to Market on your phone
Install "MSL Reader"
Run it and write down the code
#4 Install and Setup Downloaded Software
Install QPST
Open QPST Configuration from start menu
Click on "Ports" tab
Click on "Add New Port"
In the field "Port" enter "COM4" (THE PORT ON YOUR COMPUTER MAY BE DIFFERENT. COM5, COM6, ETC)
In the field "Port Label" name it. I called it "Evo"
Click "OK" and exit
Install QXDM
****My computer (Win7) had issues installing these automatically. This is what I had to do to get it installed:
-extract zip
-Put Evo in Diag mode ##3424#
-plug in Evo
-go to "Device Manager"
-find the Evo (you should see it with a "!" by it)
-right click it and select "Update Drivers"
-click "Browse my computer for driver software"
-click "Let me pick from a list of device drivers on my computer"
-click "Have Disk"
-browse to the location of the extracted "HTCDiagDrivers" folder and select the driver
-click "OK" and let it install
#5 Make your MEID writable:
Follow this tutorial Steps 1-5:
***The following thread doesn't explain Step 1 (flashing the radio) so I will tell you how
(1)RADIO
-download radio 2.05.00.06.10
-(DO NOT EXTRACT) copy to your phone's micro SD card
-reboot into recovery
-select "flash zip from sd card"
-choose the radio you copied to your card
-reboot
http://cdmagurus.com/forum/showthre...id-on-the-Evo/page7?highlight=clone+evo+boost
Immediately follow on to the next step
#6 Write Your MEID
(I initially tried another command found in this and then in a different post and could not get the MEID to stick after a reboot so this is what I did)
Copy the MEID(hex) from the back of your Evo underneath the battery
Put Evo I Daig mode ##3424#
Plug Evo into computer via USB
Open QXDM from start menu
Go to "Options" > "Communications"
Click the drop down menu next to "Target Port"
Select "COM4" (or 5,6,etc)
Click "OK"
In the field "Command" enter: "RequestNVItemWrite meid 0x&&&&&&&&&&&" replacing the "&"s with MEID from the back of your phone
Exit QXDM
Reboot Evo
#7 Restore provider settings for data, mms, and such:
***Call Sprint to activate your new phone. Probably best you don't tell them your issues. I didn't do the programming as they had told me but I said I had. This may or may not be important, but is what worked for me. Write down your MSID when they tell you it.
Enter EPST from the dialer ##3282#
Select "Edit"
Enter you MSL code
Select "Advanced"
Select "MSID"
Enter the MSID Sprint gave you
Hit menu
Select "Commit Modifications"
Let phone reboot
Enter EPST from dialer: ##3282#
Select "Edit"
Enter your MSL code
Select "Data Profile"
Press menu button
Select "Restore"
Phone will reboot and run a bunch of stuff. Let it run until it gets to "Checking for Firmware Update" press cancel (might not be important but it's what I did just because I didn't know if it would mess up my "rooted" ROM)
#8 Flash back to stock or the ROM of your choosing and enjoy your Evo!
If this How-To was unclear or I left something out let me know. I know there are many methods and I don't suggest this is the best, only what worked for me.
Here is a link to a similar thread: http://forum.xda-developers.com/showthread.php?t=937652
It doesn't deal with anything having to do with MEID but might be helpful

This will work with all evo's or only ones with older Hboots and older partitions?
Thanks
Oh, and I do believe you but your name makes it a bit harder to, LOL.

cordell12 said:
This will work with all evo's or only ones with older Hboots and older partitions?
Thanks
Oh, and I do believe you but your name makes it a bit harder to, LOL.
Click to expand...
Click to collapse
I don't know what it will work on.
The Evo I did says hw v 0003 in settings > about phone
When I vol down + power on it says:
supersonic evt2-3 ship s-off
hboot-2.10.0001
radio-2.05.00.06.10
Before doing this I had updated everything hoping it would somehow fix it. (radio/nv/etc except) and had flashed CM7RC2, myn's warm, and several others just to play with it. I read some that someone with hwv4 having issues downgrading radio but that might have been user error. Also, from what I understand you can zero out the MEID to make it writable (Step#5) using other methods without having to downgrade the radio. This is simply what worked for me.

nice write up

untruestory said:
The answers I got were conflicting, and people were generally not helpful with comments like RTFM and accusations of doing illegal stuff..
Click to expand...
Click to collapse
Because it is illegal what you're doing.

To the OP, in step #5, you mention about changing the radio. What is the purpose of this? What if the device has a more recent radio? Thanks!
=============
(1)RADIO
-download radio 2.05.00.06.10
=============

mbg19 said:
Because it is illegal what you're doing.
Click to expand...
Click to collapse
no... the person who ported it OFF of sprint was the one breaking the law. he was doing the right thing and porting the phone BACK to sprint.

heldunder said:
no... the person who ported it OFF of sprint was the one breaking the law. he was doing the right thing and porting the phone BACK to sprint.
Click to expand...
Click to collapse
Cloning an esn either way is wrong, if you break into security of a bank to return stolen money, you still broke into a bank just with good intentions, may be a bad metaphor but you should get the point, cloning both ways is illegal

gpz1100 said:
To the OP, in step #5, you mention about changing the radio. What is the purpose of this? What if the device has a more recent radio? Thanks!
=============
(1)RADIO
-download radio 2.05.00.06.10
=============
Click to expand...
Click to collapse
From what I understand from reading the refrenced thread it has something to do with the trick used to make the MEID writable or it will not work.
mbg19 said:
Because it is illegal what you're doing.
Click to expand...
Click to collapse
I think you misread something somewhere.
iitreatedii said:
Cloning an esn either way is wrong, if you break into security of a bank to return stolen money, you still broke into a bank just with good intentions, may be a bad metaphor but you should get the point, cloning both ways is illegal
Click to expand...
Click to collapse
I'm not going to get into this ridiculously played out debate and really it's off topic. If you can link to an actual government site that clearly states editing the MEID for such purposes is illegal or cases of actual criminal prosecution please post links.
Repairing the MEID is not like breaking into a bank to return money. That's absurd. It's like restoring the VIN on a car or ID# on a car stereo (which btw if have a car stereo you bought from some guy in the state of WI and it doesn't have a serial number it's a $500 fine just for having it in your possession even if there's no evidence it was ever stolen) If I had repaired the serial # on the stereo do you think I would have gotten a fine for fixing it? Don't be silly

This is nj, if you need more you can look yourself, close thread, http://www.romingerlegal.com/new_jersey/appellate/a4869-96.opn.html
untruestory said:
From what I understand from reading the refrenced thread it has something to do with the trick used to make the MEID writable or it will not work.
I think you misread something somewhere.
I'm not going to get into this ridiculously played out debate and really it's off topic. If you can link to an actual government site that clearly states editing the MEID for such purposes is illegal or cases of actual criminal prosecution please post links.
Repairing the MEID is not like breaking into a bank to return money. That's absurd. It's like restoring the VIN on a car or ID# on a car stereo (which btw if have a car stereo you bought from some guy in the state of WI and it doesn't have a serial number it's a $500 fine just for having it in your possession even if there's no evidence it was ever stolen) If I had repaired the serial # on the stereo do you think I would have gotten a fine for fixing it? Don't be silly
Click to expand...
Click to collapse

iitreatedii said:
This is nj, if you need more you can look yourself, close thread, http://www.romingerlegal.com/new_jersey/appellate/a4869-96.opn.html
Click to expand...
Click to collapse
From the link:
The end-result of this process is the creation of two telephones, the original and a "clone," that carry the same telephone number and serial number.
That is not what is going on here. The OP is not cloning, there are not two phones with the same number. I don't see anything wrong (morally or legally) with this.
OP = Good write up, and while it does not apply to me, I see how this can be useful to the Evo community.

Thanks iitreatedii for the link it was very informative but I think you missed the point.
Thank you rugedraw for clarifying.

oh lord no please no more talk of all this illegal esn business im going to throw gasoline on my computer and burn it down i have to hide all the evidence and claw my own eyes out for seeing this. i have a htc hero a epic 4g touch pro 2 and lg optimus all on boost with the same number if you catch my drift

LOL...that's too funny! I think people on here sometimes get carried away with what's illegal and what isn't. I know I might be going off topic but I remember when I had an iPhone back in the day and I mentioned to someone that I jailbroke it and they were like OMFG, that's illegal....you'll go to jail!!....I seriously doubt that the government is going to waste time and money going after ONE SINGLE person that jailbroke/cloned an esn or whatever......in these cases you read about how someone got locked up for doing such a thing it was because A. they were stealing someone's information/money or B. they got greedy and started running a craigslist/ebay business out of their mom's basement........SO LIKE jay said....let's cool it on the whole illegal/legal deal......no one has to burn a computer down or burn their fingerprints or change their names and move to mexico....ALRIGHT?!..lol...All the OP was trying to do was save someone the headache of researching the damn info themselves!
You either let the kid post it on here or it gets posted on some other forum....either way, the information WILL BE OUT THERE!

There are plenty of threads about the legalities out there. I'll say this and lets let it go:
1) although prosecution is extremely rare and most references to laws about it are out-dated altering an esn IS illegal.
2) people that get off telling other people that everything is illegal are probably just acting out because their parents didn't hug them enough growing up.
3) it is against forum rules because the forum can get in trouble because it is illegal.
4) REPAIRING the esn is not illegal and not against forum rules.
5) the topic of this thread involves REPAIRING the esn, not altering it.
Sent from my PC36100 using Tapatalk

i think the main issue here is that by showing someone how to "undo" it that person can easily figure out how to "do" it. it is a PITA to find all this info but by posting it here people who steal phones...(bastards) can have easy access by searching a few keywords.
i don't think it's wrong but this info could fall into the wrong hands and that would make my evo a target.

it's just like when I had my 88 VW GTI there is a easy way to break into one just jab a screwdriver through the door right below the handle and jiggle it. well I read about this on a website selling reinforced steel plates that you weld inside the door to prevent this.
the point is, you are empowering people by giving them the tools they need to change or clone an esn/meid. for good or for evil
Sent from my PC36100 using XDA Premium App

thedudejdog said:
i think the main issue here is that by showing someone how to "undo" it that person can easily figure out how to "do" it. it is a PITA to find all this info but by posting it here people who steal phones...(bastards) can have easy access by searching a few keywords.
i don't think it's wrong but this info could fall into the wrong hands and that would make my evo a target.
Click to expand...
Click to collapse
Keep in mind that this write up is somewhat advanced, not every thief out there has any idea of what to do with the phone in order to make it 'usable'... all they want is cash. Note that there is high risk of bricking the device as well (since the procedure requires to mess up with the weakness of the EVO: its radio)
Also, this information has to have been available somewhere else thus the risk you run getting your phone stolen for this purpose is the same as it was before this was written.

rugedraw said:
From the link:
The end-result of this process is the creation of two telephones, the original and a "clone," that carry the same telephone number and serial number.
That is not what is going on here. The OP is not cloning, there are not two phones with the same number. I don't see anything wrong (morally or legally) with this.
OP = Good write up, and while it does not apply to me, I see how this can be useful to the Evo community.
Click to expand...
Click to collapse
I agree...I'm so sick of this cloning illegal/isn't illegal. Good piece

good write up, I hope someday I can use it.
Sent from my PC36100 using XDA Premium App

Related

##DATA# Menu

Edited due to objections by other members.
MikeBrWade said:
Is there a manual or an explanation of what each of the settings does?
Sent from my Evo using XDA App
Click to expand...
Click to collapse
dude.....why would you put this in development...really
post in qa
Edited due to objections by other members.
MikeBrWade said:
Is there a manual or an explanation of what each of the settings does?
Sent from my Evo using XDA App
Click to expand...
Click to collapse
I hate useing this cop out, but if you need a user guide for editing these functions then you really don't need to be messing with stuff in there. If you're told to change something.. make that one change and get out of that menu.. other than that you can google each setting to find out what they do if you REALLY must know.
This is one of the only places on a phone that if you screw mess with stuff you can brick your phone
... well maybe brick isn't the correct term... you'll go from smartphone to pda if you change the wrong thing, and it is very easy to change the wrong thing.
an RUU will not fix what you **** with in there. just an FYI.
can someone do me a favor, some else in another forum told me to change some settings, which i believe fck my phone can you guys check if under wimax, your guys NAI adress is the same as your Wimax MAC adress plz thank you
jonathaflores said:
can someone do me a favor, some else in another forum told me to change some settings, which i believe fck my phone can you guys check if under wimax, your guys NAI adress is the same as your Wimax MAC adress plz thank you
Click to expand...
Click to collapse
Yes, it is the same.
Always be prudent in knowing "what" you're changing and "why". May prevent / lessen future problems.
johnsongrantr said:
I hate useing this cop out, but if you need a user guide for editing these functions then you really don't need to be messing with stuff in there. If you're told to change something.. make that one change and get out of that menu.. other than that you can google each setting to find out what they do if you REALLY must know.
This is one of the only places on a phone that if you screw mess with stuff you can brick your phone
... well maybe brick isn't the correct term... you'll go from smartphone to pda if you change the wrong thing, and it is very easy to change the wrong thing.
an RUU will not fix what you **** with in there. just an FYI.
Click to expand...
Click to collapse
Is that legitimately true? I don't think that it is. If you bork something inside the Data menu, as long as you can get back to the phone (pda since it is supposedly bricked), wouldn't all you have to do is type in ##786# (##RTN#), hit menu, and hit reset with your MSL? I believe that would fix all of the items you screw with in the data menu. I could be incorrect though.
bpdamas said:
Is that legitimately true? I don't think that it is. If you bork something inside the Data menu, as long as you can get back to the phone (pda since it is supposedly bricked), wouldn't all you have to do is type in ##786# (##RTN#), hit menu, and hit reset with your MSL? I believe that would fix all of the items you screw with in the data menu. I could be incorrect though.
Click to expand...
Click to collapse
That will useally work, but I've even seen forced provisioning on your ESN to fail in the past.
I'm sure there is stuff in there that will fix, but I doubt it will fix everything.
As a rule of thumb though, I'd suggest not even going in there unless you know what you know what you're doing.
johnsongrantr said:
That will useally work, but I've even seen forced provisioning on your ESN to fail in the past.
I'm sure there is stuff in there that will fix, but I doubt it will fix everything.
As a rule of thumb though, I'd suggest not even going in there unless you know what you know what you're doing.
Click to expand...
Click to collapse
I would agree to that. You should never attempt anything unless you know what you're doing. Unless of course you are fully prepared to face the consequences.
Edited due to objections by other members.
Edited due to objections by other members.
Nice thank you for posting that info.
Sent from my PC36100 using XDA App
Edited due to objections by other members.
........
Edited due to objections by other members.

[Q] 4G on Boost Mobile via CLEAR

Before I ask my question let me address the trolls that might mess up this thread and end up getting it locked.....
1. I'm not trying to ask for a guide
2. I'm not trying to debate whether is illegal or legal to have a flash evo on boost
3. I'm just asking a question, nothing more...nothing less
OK with that said, I wanted to know if anyone on Boost Mobile using the original EVO has successfully got 4G to work using Clear and if you did, how are your speeds?
The reason I'm asking is because I saw this video about a week or two ago and was like "OK, this is a joke and the guy is just full of it" BUT as I started to do my own research on it, I found that it might be possible. NOT as easy as the guy below makes it seem BUT it MIGHT be possible....
mazdarider23 said:
3. I'm just asking a question, nothing more...nothing less
OK with that said, I wanted to know if anyone on Boost Mobile using the original EVO has successfully got 4G to work using Clear and if you did, how are your speeds?
Click to expand...
Click to collapse
K, I'm not sure about Boost Mobile as I am not on their network, BUT, as I am on a different network myself. In my case, MobiPCS, which is basically the same type of carrier anyway. However, I'm guessing that it should apply with ye too.
I'm in the process of tying my 4G to Clear too. In fact, I've already made the modifications on my e4g to enable clearwire service on it and I've already confirmed that it works. I've as yet to actually activate my service (meaning unrestricted access to the internet) on it tho.
The reason why I think it should apply to you is that all the modifications are in the basic settings of the phone which has nothing to do with what rom you are using.
Before I start, I should mention that to cover xda and mine ass:
"You are responsible for any modifications done to your phone, the information provided are for educational and informational purposes. Any modifications done to your phone may result in an unuseable (bricked) phone which will be your responsibility to deal with. Under no circumstances will xda nor I will be held responsible for any damages or problems arising from any modifications done by you on your phone."
Ok, now that the legalese are out of the way...
Go to Phone and enter "##3282#" on the dial pad.
The phone will then initialize the EPST (don't ask me what epst means, I dunno ...yet).
It will then ask you which Mode you want to be in. I suggest View first to familiarize yourself without chance of screwing up something in there. Be aware a incorrect setting could result in a bricked phone, so be careful. When you are ready, select Edit Mode. Then phone will ask you for the MSL code. There are ways of finding out that code, but I won't get into that now, you can find that information by searching the forums.
Hit WiMAX > Realm
It probably will still be the default "sprintpcs.com." Change that string to "clearwire-wmx.net"
Hit the menu button and select "Commit Modifications." Be patient, it can take up to a few minutes for the phone to do the modifications.
You will know if the modifications took if the NAI string changes from
"[email protected]" to "[email protected]" Remember, "device_MAC_address" is the actual 12-digit MAC address of your phone. This is important: make SURE your listed mac address MATCHES the actual mac address printed on the back of the phone under the battery. If it's incorrect, I'm sure you can fix that, but you'll have to search these forums for that information as I did'nt have that problem with my e4g, but I DO have that problem with my e3D, but haven't gotten around to dealing with that (have other problems on my e3D that requires more immediate attention).
Back out of EPST and go to Setting > Wireless & networks > 4G settings. Click on 4G to turn on the antenna. It should then start saying it's connecting to network. Once connected it probably will say "Connected to Sprint" when you're actually connected to clearwire. I understand you can change the above string to "Connected to Clearwire" but I don't know how ...yet. I wanna do this myself too. Probably have to use Root Explorer (or similar software and edit something).
Go to your favorite browser and try connect to a website. Instead it should be automatically redirected to clear.com's page. This is normal when you don't have an account/service associated with the connecting device mac address. It should ask you somewhere whether you want to add this device. Click on it and it should then go to a page where it will ask you whether you want to use the connecting device. Check the bottom and make sure the mac address given there matches your device. If it is the same, you're good to go and activate service or associate that device to an existing service. Be aware that you can only have up to 3 devices associated to a given service, pending on the plan you choose. I currently have the Pick-2 plan and will soon upgrade to the Pick-3 plan which allows 3 different devices on the same account.
Once you activate new or associate an existing service to your device, Clearwire will add your mac address to it's server's list of devices authorized to connect to the clear service. And voila! your online with clear!
Hope this helps. I don't see any reason why you shouldn't be cleared to connect your boosted e4g (sorry, couldnt resist the pun).
-Lance
Thanks dude!!
Unfortunately, I called Clear today before doing all this editing and stuff AND found out that service isn't provided in the Pensacola area
I WILL keep this mind for when I'm in Jacksonville, FL which service is provided and try it out....THANKS again Lanaka!
cloning_is_illegal said:
Sent from my PC36100 using xda premium from my PC36100 using xda premium
Click to expand...
Click to collapse
Dude, chill. If you READ before posting, you MAY note that there is no phone cloning nor any subscriber fraud involved here. All we are doing is to tell the phone where to go connect for 4G service. No fraud involved when youre hooking up YOUR own phone to YOUR own phone and/or 4G service.
Oh another thing, ...lay off on the excessive abuse of red text. That is as tasteless as writing an entire post in ALL-CAPS.
Jeez, the immaturity of peoples nowdays....
---------- Post added at 03:04 AM ---------- Previous post was at 02:25 AM ----------
mazdarider23 said:
Unfortunately, I called Clear today before doing all this editing and stuff AND found out that service isn't provided in the Pensacola area
I WILL keep this mind for when I'm in Jacksonville, FL which service is provided and try it out....THANKS again Lanaka!
Click to expand...
Click to collapse
Ahh, thats a bummers! I know the feeling bro! I dont have clear Clear coverage (pardon the pun, its NOT intentional, hehe) at home. However i have pretty good signal at most of the other places where i'd connect. I already have both mobpcs and clear services, separately tho, and generally hapy with both.
-Lance
P.S.: before any other jacks start flaming away, please note the above is MY opinion only. If you aint got nothing to contribute but negativity, id rather you NOT post a reply AND keep it to yerself. Thank you very much!
For some reason when i did this. i put the clear-wmx.net in EPST and commited. after that i turned 4g on and it didnt connect to clears website it just started working but its slow and btw i dont have any type of clear account
Alienx15 said:
For some reason when i did this. i put the clear-wmx.net in EPST and commited. after that i turned 4g on and it didnt connect to clears website it just started working but its slow and btw i dont have any type of clear account
Click to expand...
Click to collapse
Aloha Alienx.
Based on what you wrote it appears that you re not actually connecting to Clear's 4G service. You first must make sure that you are actually in the service coverage area. You can check by hitting their coverage map page:
http://www.clear.com/coverage
Next, check your notification bar, which service icon is on? 4G, 3G, 2X or 1X? Or is wifi on (the rainbow-like symbol)? I suspect you are either not in a service area and using 3G/2X/1X or using a slow wifi.
The reason why I think so is because if you try access Clear, their servers will first check your connecting device's mac address against their list of authorized devices. If it is not on their list your connection will auto directed to their web pages to be given an opportunity to sign up to their services. At this point you can then let them save your device's mac addy to the server's list of authorized accessing devices (assuming you signed up and paid for their services).
-Lance
PS: a final thing, make sure the EPST has the correct mac addy as your device's id. It has been know to happen where the phone's id number in the software side did NOT match what was in the hardware.
clear 4g
i have hit their home page (home dot clear dot com) on 4g using epic 4g going to add my device to my account ill let you know
set my realm to clearwire-wmx.com

cant get old phone number off flashed htc evo 4g to boost mobile

Hey everyone i need your help.
so i bought an htc evo 4g from craigslist already flashed to boost mobile the phone worked fine on the guy who i bought it from he gave me his boostmobile account info to transfer his phone to my acc. so i got home with the phone i transfered his account info to my boost account and now i cant get calls or anything no interenet nothing!! i look at the phone identity and it still has his number under it i called boost and they walked me through a procedure even did ##(some numbers)# to bring up a screen to put in my new number i did tht ut still nothing. it shows his number still in the phone identity im lost please help i spent 170$ and i want my phone to work some1 help me
do you know your Evo's MSL or SPC? If so, try pushing ##123456# (123456 should be your MSL) then on the pop up menu that comes up select "Edit Mode" then you need to change your MDN to your new number and you need to change the MSID to the new one too. If you already talked to Boost then hopefully you wrote these 2 numbers down. If not, call them again and tell them you switched numbers/phones and need to re-enter that info. Just tell them you need the new MDN and MSID so you do not have to sit and have them try and walk you through steps to that are not for the Evo. DO NOT tell them it is an Evo obviously. If you do not know your Evo's MSL then it is pretty easy to get through CDMA WS, pm me and I can help you with that part if necessary. Hope this helps, if you need anything else feel free to ask!
*If I have helped, please take a second to hit my thank you button*
thanks man now i need help with the internet its not working and i have no idea wat to do
Push ##33284# then select EVDO Engineering. Scroll all the way to the bottom an tell me what it says next to AN/AAA
Did you try going to settings, system updates, update profile yet? Also it can take up to 48 hours for everything to work IF it says 1- authenticated after AN/AAA
Sent from my PC36100 using xda premium
it says to 2=failed authentication
ive also tried up dating profile it would let me
If it says authentication failed then your AAA and HA keys are wrong. Did you get the donor phone from the guy you bought the Evo from???? If you did then it will be pretty simple to pull the correct AAA and HA keys from it.
If you do not have the donor, you might try ##786#, then hit menu then hit reset. Be warned, it will reset everything back to factory so make sure you back up anything worth saving first. When the phone resets itself, it will try to perform an OTA activation. I am wanting to say it should provision the AAA keys on its own after that (If I am wrong on this part, please feel free to step in and correct me guys)
what do i need to save to be backed up and i dont have doner phone
Dont think you can do that, tell you what I did. I bought an Evo also off ebay fixed the glass and found someone to flash it to boost. after 2 months with phone the 3g went out, tried to get help from flasher but no go, I found a guide myself and started testing, first flash success, so wanted to reflash my phone and only way to get it done was to buy a donor phone, attach it to your boost account, hook it up pull the info, reflash EVO and all done. You cant just take a phone and move it to your account, wont work.
You should have just left it the way it was, now you'll need to get a donor phone and start over, I did and doing fine now.
If you need help let me know.
Yep, I agree. If you do not have the donor, I would suggest buying a new one. Even if you do manage to fix data this time, you will have more problems later. The fact that you did not get the donor might mean the Guy is activating more than one evo with it and that means you might start getting the error 16 in the future. I have always given the donor back to the person I flashed for because I do not need it and more importantly I have no legitimate reason for keeping it.
Sent from my PC36100 using xda premium
Would this be the same steps if i call Boost and change my old number, im giving my EVO to my daughter but she doesnt want my number.
It will be the same steps as to changing the numbers in the setting once i enter the MLS???

Flashing Epic to Boost, quick question before purchasing donor

I have been in the process of attempting to flash my Epic 4g to boost for about a week now (with very limited time each day). Thanks to the help of some awesome people here on the forum I have made quite a bit of progress. I have however, hit a wall. I am currently attempting to use a Samsung Replenish which I purchased with GB 2.3.6 pre-installed. I have gotten to the point where I need to extract the HA/AAA keys from the donor and it is locked down tighter than (insert random virgin joke here...). I have tried two methods, method 1- reading NV Items 465,466,1192, and 1194, this method gives me four text files, each of which say access denied toward the top and give me nothing but goose eggs. method 2- using QXDM typing password (spc) which works fine, I have the right SPC and it accepts it, but then when I type the requestnvitemread ds_mip_ss_user_prof command (and I have tried prof 1 and prof 0) it says "error recieved from target". I am not familiar with anything more technical than what I explained, I know my way around these phones a bit and am technically savvy, but I do not know any code or anything like that.
I stated in my first post that I dont mind having to spend money to get my epic to boost but I would like to avoid it. With that being said, I would like to know if there is anything that I can try before pulling the trigger on a Sanyo Incognito (which to my understanding is one of the easier phones to use for this process). I have read that flashing back to froyo might help, but I cant find anything on flashing the Replenish back to Froyo as no one seems to want to do it. If anyone has any advice on flashing back to Froyo or anything else that I can try to get those keys I would be eternally grateful (well maybe for a day or two, after that I'd probably forget...anyways...)
thanks in advance for any help!!
Even though you're trying to flash an Epic 4G, this question is more applicable to a Replenish forum (if there is one), where people have experience reading these NV items on that particular model.
Some things to try:
Try first sending "password 01F2030F5F678FF9" in QXDM. (I wouldn't be surprised if this password did not work for the Replenish. Some Samsung devices have unique passwords.)
Try DFS CDMA Tool.
Try reading /nvm/num/ in QPST EFS Explorer.
etirkca said:
Even though you're trying to flash an Epic 4G, this question is more applicable to a Replenish forum (if there is one), where people have experience reading these NV items on that particular model.
Some things to try:
Try first sending "password 01F2030F5F678FF9" in QXDM. (I wouldn't be surprised if this password did not work for the Replenish. Some Samsung devices have unique passwords.)
Try DFS CDMA Tool.
Try reading /nvm/num/ in QPST EFS Explorer.
Click to expand...
Click to collapse
Yeah, unfortunately for me, this phone isn't very popular...especially in the hacking/flashing community so my resources are limited, I did not see a thread dedicated to this phone on here. I tried using the password that you gave me and it did accept it but did not change my result. I also tried using efs explorer and each file that I save/view says secret and nothing else....
Usually reading EFS is blocked until you send the 16 digit password, but it sounds like you did that already. Sorry, I've never used a Replenish, so I'm not sure what else to do.
etirkca said:
Usually reading EFS is blocked until you send the 16 digit password, but it sounds like you did that already. Sorry, I've never used a Replenish, so I'm not sure what else to do.
Click to expand...
Click to collapse
NP thanks anyway, I went ahead and bought an Incognito. I got a deal on ebay, for a nonfunctional unit with guaranteed ESN as well as USB capabilities for $35, the dealer sells them specifically for the purpose of donor/flashing. Guess I'll have to wait a few more days for an almost fully functional Epic...At least now I get to play around with some roms and fine tune that sucker to my exact liking
One more quick question though, When I get the phone, should I transfer my boost account to it BEFORE I flash the epic? or can I just flash it, call from the epic and transfer it all that way?
You need to have the incognito on boost first. When you transfer the account to incognito they will program the phone for you. I would suggest you to talk to a live person at boost when you activate the incognito. Write down the spc code and mdn number. This will save you some time. After that everything else should be easy. Program the epic with the information from incognito.
bugzy3188 said:
One more quick question though, When I get the phone, should I transfer my boost account to it BEFORE I flash the epic? or can I just flash it, call from the epic and transfer it all that way?
Click to expand...
Click to collapse
Sent from my PC36100 using XDA Premium App

How to Fascinate your Mesmerize! SCH-i500 USCellular -> PagePlus/Straight Talk

So, this was a severe pain in the ass, but I made it, so I thought I'd share.
If you are like me, you're here because you already pulled the trigger on porting your number to PagePlus, frantically searching for a guide to getting your US Cellular Mesmerize work...with data. Once ported over, if you use Kitty Wireless you get a discount and they will email you with step by step instructions that should supplement this guide beautifully.
I have a US Cellular Mesmerize, and I didn't feel like changing hardware, so I wanted to make it work on PagePlus...little did I know the tangled web of annoyance I had stumbled upon.
First off, grab connectbot on the market. Run it, switch the ssh option to local, choose a name (bob or one letter is fine) hit the return key then type the following, exactly:
getprop ril.MSL
Write down the "magic code" (should spit out the SPC code which is six digits and often 000000, but not mine hence learning to do this) and if that doesn't work, keep digging these forums, though this doesn't even need root to work.
Get: windows drivers for samsung sch-i500
Odin
QPST (demo from their site works fine and is virus free...aside from not saving backups it works great...search for a screenshot guide of using qpst to change a prl file)
Kitty Wireless will email some fairly detailed instructions for setting up and link you to Manual Programming, go there and grab the prl file they offer for download
I believe if you search for it you should find the code (ill try to edit later) for changing your ESN number, which if you've already pressed go is available through email from kitty wireless along with your cell number. If you're coming from US Cellular, this is often your number, but needs to be changed to the number you are setting up with Kitty, though your phone number will remain the same if you're porting it.
Use Odin, Using Verizon Rom package (link edit search fascinate stock rom, swap pit and tar file with odin, make sure partition is checked)
Update with OTA programming, and voila, fascinated mesmerize.
Sent from my FascinatedMesmerize SCH-I500 using Tapatalk 2
Make the leap, save cash!
Many people are interested in this swap...here's a thread I discovered that may help complete the picture.
androidforums.com/samsung-mesmerize/253657-mesmerize-verizone.html#post6388018
Damn newb limits have me thwarted on linking again!
Verizon i500 to page plus?
I installed the stock Verizon rom to a i500 that was through a local company but was reading now page plus won't accept flashed phone's since Oct. Is there a way to get it to work?

Categories

Resources