Flashing Epic to Boost, quick question before purchasing donor - Epic 4G Q&A, Help & Troubleshooting

I have been in the process of attempting to flash my Epic 4g to boost for about a week now (with very limited time each day). Thanks to the help of some awesome people here on the forum I have made quite a bit of progress. I have however, hit a wall. I am currently attempting to use a Samsung Replenish which I purchased with GB 2.3.6 pre-installed. I have gotten to the point where I need to extract the HA/AAA keys from the donor and it is locked down tighter than (insert random virgin joke here...). I have tried two methods, method 1- reading NV Items 465,466,1192, and 1194, this method gives me four text files, each of which say access denied toward the top and give me nothing but goose eggs. method 2- using QXDM typing password (spc) which works fine, I have the right SPC and it accepts it, but then when I type the requestnvitemread ds_mip_ss_user_prof command (and I have tried prof 1 and prof 0) it says "error recieved from target". I am not familiar with anything more technical than what I explained, I know my way around these phones a bit and am technically savvy, but I do not know any code or anything like that.
I stated in my first post that I dont mind having to spend money to get my epic to boost but I would like to avoid it. With that being said, I would like to know if there is anything that I can try before pulling the trigger on a Sanyo Incognito (which to my understanding is one of the easier phones to use for this process). I have read that flashing back to froyo might help, but I cant find anything on flashing the Replenish back to Froyo as no one seems to want to do it. If anyone has any advice on flashing back to Froyo or anything else that I can try to get those keys I would be eternally grateful (well maybe for a day or two, after that I'd probably forget...anyways...)
thanks in advance for any help!!

Even though you're trying to flash an Epic 4G, this question is more applicable to a Replenish forum (if there is one), where people have experience reading these NV items on that particular model.
Some things to try:
Try first sending "password 01F2030F5F678FF9" in QXDM. (I wouldn't be surprised if this password did not work for the Replenish. Some Samsung devices have unique passwords.)
Try DFS CDMA Tool.
Try reading /nvm/num/ in QPST EFS Explorer.

etirkca said:
Even though you're trying to flash an Epic 4G, this question is more applicable to a Replenish forum (if there is one), where people have experience reading these NV items on that particular model.
Some things to try:
Try first sending "password 01F2030F5F678FF9" in QXDM. (I wouldn't be surprised if this password did not work for the Replenish. Some Samsung devices have unique passwords.)
Try DFS CDMA Tool.
Try reading /nvm/num/ in QPST EFS Explorer.
Click to expand...
Click to collapse
Yeah, unfortunately for me, this phone isn't very popular...especially in the hacking/flashing community so my resources are limited, I did not see a thread dedicated to this phone on here. I tried using the password that you gave me and it did accept it but did not change my result. I also tried using efs explorer and each file that I save/view says secret and nothing else....

Usually reading EFS is blocked until you send the 16 digit password, but it sounds like you did that already. Sorry, I've never used a Replenish, so I'm not sure what else to do.

etirkca said:
Usually reading EFS is blocked until you send the 16 digit password, but it sounds like you did that already. Sorry, I've never used a Replenish, so I'm not sure what else to do.
Click to expand...
Click to collapse
NP thanks anyway, I went ahead and bought an Incognito. I got a deal on ebay, for a nonfunctional unit with guaranteed ESN as well as USB capabilities for $35, the dealer sells them specifically for the purpose of donor/flashing. Guess I'll have to wait a few more days for an almost fully functional Epic...At least now I get to play around with some roms and fine tune that sucker to my exact liking

One more quick question though, When I get the phone, should I transfer my boost account to it BEFORE I flash the epic? or can I just flash it, call from the epic and transfer it all that way?

You need to have the incognito on boost first. When you transfer the account to incognito they will program the phone for you. I would suggest you to talk to a live person at boost when you activate the incognito. Write down the spc code and mdn number. This will save you some time. After that everything else should be easy. Program the epic with the information from incognito.
bugzy3188 said:
One more quick question though, When I get the phone, should I transfer my boost account to it BEFORE I flash the epic? or can I just flash it, call from the epic and transfer it all that way?
Click to expand...
Click to collapse
Sent from my PC36100 using XDA Premium App

Related

A "Pro" Flashing my Epic 4G to Metro

Bought an Epic 4G Touch and found a local guy on craigslist who's going to do a full flash to MetroPCS. I'm wondering if anybody has any suggestions as to what questions I should ask the guy. I'm new to this whole thing, this is my first smart phone, but I'm a quick learner.
From what I understand from my research, he's going to have to flash a custom rom on it in order for the phone's features to be fully operational. Is it important I find out which rom so I can perform my own updates, or is it going to be obvious what he did simply by looking in the settings?
Am I going to have to avoid OTA updates? Or do I just install Rootkeeper to get the updates?
I also assume that by doing this I will be stuck using the custom rom, right? Or as long as my ESN is added to the Metro system I can change it to any rom I can find that is fully operational with Metro?
Is there any other vital information I should make sure to ask for in case I need to configure anything in the future?
Would it be smarter for me to just ask him to add my ESN to metro and then flash it myself? (If I can find a guide online-- links, anybody?)
Feel free to add any information that you think might help!
Thanks in advance.
its pretty much about manually programming in your data settings 100% correctly. anyone can add an meid/esn into their database and program in your phone number(##SPC#). if you research online you can find the exact settings. i dont believe metro uses wap anymore so that certainly makes things easier.
you should be able to use ANY rom and be able to call/text/use data. the only issue you will run into(maybe.. i dont use metro) would be mms. mms sometimes is custom built for a specific phone/carrier. when you see metro/cricket custom roms.. thats generally the big modification.. the mms. you may get some little edits here and there.. changing the word sprint to metro etc... but otherwise thats pretty much it. as is.. the epic 4g touch can be manually programmed with any cdma carriers data profiles for 3g.
if you dont care about mms.. its a 100% no brainer.. take the time and do it yourself. if mms is a must.. do a little research to see if others on metro got mms working.. there will be people talking about it somewhere on the internet.
and just to add.. if u do use a custom rom for metro.. you will be stuck with that rom(unless its a freely available custom rom.. but those are rare these days.. most are sold on cdma forums for lots of $$$).
I will preface this with I've never done this before so I don't know the outcome. That said, at least in my area, the 4g is not compatible with lte, metro doesn't have 3g but 2g rttx1 should work. I don't know about you but if it were me, I wouldn't do it. That's like putting a restricting device on a Porsche so that its top speed is 30mph. 2g is practically dial up speeds. Do what you will though...
autoprime said:
its pretty much about manually programming in your data settings 100% correctly. anyone can add an meid/esn into their database and program in your phone number(##SPC#). if you research online you can find the exact settings. i dont believe metro uses wap anymore so that certainly makes things easier.
Click to expand...
Click to collapse
Thanks so much, great information. Question- Do you mean I can add my own ESN into the Metro Database myself? I thought only Metro reps could do that (independent ones for under the table).
As for the rest of the data settings, when searching for this information online, do I need to look specifically for Epic 4g Touch, or the data settings will be the same no matter what phone?
autoprime said:
if you dont care about mms.. its a 100% no brainer.. take the time and do it yourself. if mms is a must.. do a little research to see if others on metro got mms working.. there will be people talking about it somewhere on the internet.
Click to expand...
Click to collapse
Actually I don't care about mms, as long as I can do regular text messages (sms). Does this mean that if I don't care for MMS I can actually get the Epic Touch fully operational on the stock rom?
autoprime said:
and just to add.. if u do use a custom rom for metro.. you will be stuck with that rom(unless its a freely available custom rom.. but those are rare these days.. most are sold on cdma forums for lots of $$$).
Click to expand...
Click to collapse
So I couldn't re-flash it to a different rom? It's not "reversible"? (If it is possible- would I lose all the Metro data if I changed the rom?)
Thanks for the help, I've been Googling around like crazy trying to find more info, but not finding a lot. I probably should of gotten a more commonly metro flashed phone, lol. I'll keep looking around and see if I can find any guides, if I find one and can do everything myself I'd rather go that route (not to save money, just to be able to troubleshoot any issues that may arise in the future).
Edit: I've found this thread http://forum.xda-developers.com/showpost.php?p=8395950 that looks like it might be exactly what I need to do (up to step 28), and someone on this Epic Touch Forum recommended another member to this thread http://forum.xda-developers.com/showthread.php?t=1303507 but it's for Evo 3D, so not sure if it would work for the Epic. The guide starts off for phones already "flashed to metro with text and talk", though. I think I still need to pay the "Pro" to get my ESN added to the Metro Network? Are they able to add the ESN to the Metro Database and get text/talk working without flashing a custom rom?
Sorry... so many questions. I'll give lots of thanks =(
EDIT #2:
Think I got it now. Looks like I will need to get the phone Metro Flashed through my guy for talk and text (I can ask if his MMS/Web method involves a custom rom, if so I'll pass) then I can activate web (and MMS I guess) myself through these steps: http://forum.xda-developers.com/showthread.php?t=1303507
At this point (correct me if I'm wrong) I won't be locked into any custom roms and I can freely upgrade to any freely available rom (ie CM7) without affecting my Metro settings?
really not sure what the best procedure is for getting your esn added to the DB.. i would think any 3rd party metro store would be able to add it into system... as well as some people on craigslist. just look for the cheapest option.
once your esn ins in the system.. you pick a plan.. program in your phone number and msid (##SPC#) as well as write a metro PRL to the phone... and thats it for working talk/text. thats the "basic flash" most people do. only thing you cant do yourself is add meid.
and then you will eventually program data. the steps for evo 3d should be very similar to epic. other than how to get the phones into DIAG mode.. what to manually add is the same across the board... tho your username/password will be unique to you. (ppp password is based off esn.. username will be based on phonenumber).
i believe metro has recently added 3G in SOME areas.. so theres a small chance youll have that. and as for 4G... see my epic 4g touch thread on how to edit wimax settings...
ive said enough.. you should be able to take it from here.
edit: as for being "stuck" with a custom metro rom.. youd have the option to reflash anything youd like.. but the custom metro settings would probably no longer work. it would suck to pay for a custom rom that you end up wanted to switch out anyway(since it wouldnt be updated like he rest of the roms). i say pay the $10.. 15..20.. whatever it is to have esn added to the system.. then do the rest yourself.
If you search on ebay. There is a guy that can add your esn to metro for $25. Then you can flash your own custom rom, but you would have to setup your own data. If you search around, there are threads about how to setup data for metropcs around the web.
Ran outta thanks, I'll get you tomorrow
I looked it up on ebay and there's only a couple up atm and they end up being a lot, ie the cheapest is $20 but then they charge $25 shipping lol <.<
Luckily, the local guy I found on Craigslist (there are actually a lot independent metro stores in the area advertising actually) will add ESN and get talk & text working for $35. So it's not a bad deal. From there I'll get the rest working myself.
Although I'm gonna ask him about his MMS method, if it involves a custom rom I have been contemplating getting it. I been researching and it looks like all I have to do is backup the custom rom with nandroid, and I can flash to whatever rom I want, then I can always revert to the custom rom if I really want MMS working again-- if I'm unable to get it working myself.
My used Epic 4G Touch arrives in a few hours!
First thing I plan on doing is a full restore and then installing EL13+CWM. After this I'll get take it to the independent Metro store to get it flashed over to Metro. Then I'll make my first nandroid backup.
Question- By making the nandroid backup I can always revert back to the Metro data settings my guy configured, right? (In the case they get deleted through rom flashing).
Can I see all the settings he configured by reading the values set through CDMA Workshop? Would this include everything needed to make the phone fully functional on Metro again (outside of the possible custom rom to make MMS work)?
Thanks in advance.
Godswrath said:
My used Epic 4G Touch arrives in a few hours!
First thing I plan on doing is a full restore and then installing EL13+CWM. After this I'll get take it to the independent Metro store to get it flashed over to Metro. Then I'll make my first nandroid backup.
Question- By making the nandroid backup I can always revert back to the Metro data settings my guy configured, right? (In the case they get deleted through rom flashing).
Can I see all the settings he configured by reading the values set through CDMA Workshop? Would this include everything needed to make the phone fully functional on Metro again (outside of the possible custom rom to make MMS work)?
Thanks in advance.
Click to expand...
Click to collapse
nandroid wont restore data settings... but you wont need to as 3g data profiles(as well as talk/text) stick after new roms. only a ##786# full reset will wipe those settings.
you should be able to see most if not all settings with cdma ws/qpst service programming.
1. Phone number/msid has to be programmed.
2. Metro PRL Flashed
3. after step two you now have talk/text.
4. Program in 3G Profile 0/1.
5. Program PPP data profile.
6. Done. Only thing I skipped is MMS.. which will most likely be covered by a custom metro rom.. tho maybe you could take the mms ap out of the custom rom to use... but im just guessing at this point.
autoprime said:
really not sure what the best procedure is for getting your esn added to the DB.. i would think any 3rd party metro store would be able to add it into system... as well as some people on craigslist. just look for the cheapest option.
once your esn ins in the system.. you pick a plan.. program in your phone number and msid (##SPC#) as well as write a metro PRL to the phone... and thats it for working talk/text. thats the "basic flash" most people do. only thing you cant do yourself is add meid.
and then you will eventually program data. the steps for evo 3d should be very similar to epic. other than how to get the phones into DIAG mode.. what to manually add is the same across the board... tho your username/password will be unique to you. (ppp password is based off esn.. username will be based on phonenumber).
i believe metro has recently added 3G in SOME areas.. so theres a small chance youll have that. and as for 4G... see my epic 4g touch thread on how to edit wimax settings...
ive said enough.. you should be able to take it from here.
edit: as for being "stuck" with a custom metro rom.. youd have the option to reflash anything youd like.. but the custom metro settings would probably no longer work. it would suck to pay for a custom rom that you end up wanted to switch out anyway(since it wouldnt be updated like he rest of the roms). i say pay the $10.. 15..20.. whatever it is to have esn added to the system.. then do the rest yourself.
Click to expand...
Click to collapse
You can change your meid. ##YOURMSL#
Sent from my SPH-D710 using xda premium
locoboi187 said:
You can change your meid. ##YOURMSL#
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
yes it is possible to change an meid... but i'm not sure why ##MSL# is mentioned... the two are not related.
Hmmm... I'm stuck on this step :
USB Storage Mode is OFF - [Drag down the notification bar and tap on "USB Connected" - should be off by default]
When I click on USB Connected it just sends me back to Home. Any ideas?
(Step 1 from http://forum.xda-developers.com/showthread.php?t=1342728)
EDIT: figured it out, had to re-install drivers and change the default location to 32-bit
Nope, still no go... Hmm Maybe I'll uninstall drivers and reinstall them. Problem is my PC isn't recognizing phone as a drive, just a device.
Yeah I dunno, gonna give up installing EL13+CWM for now and go get it flashed.
I think the problem is, when I connect the device I get "Samsung Mobile MTP Device Failed"
I downloaded the Samsung USB/Android drivers [USB/Android] and have Kies installed (Kies can't even recognize it though).
autoprime said:
yes it is possible to change an meid... but i'm not sure why ##MSL# is mentioned... the two are not related.
Click to expand...
Click to collapse
Your MSL code entered at the dialer with the "#" brings up a menu in which you can edit. I used this with a sprint tech when trying to fix my gps
Sent from my SPH-D710 using xda premium
Godswrath said:
Hmmm... I'm stuck on this step :
USB Storage Mode is OFF - [Drag down the notification bar and tap on "USB Connected" - should be off by default]
When I click on USB Connected it just sends me back to Home. Any ideas?
(Step 1 from http://forum.xda-developers.com/showthread.php?t=1342728)
EDIT: figured it out, had to re-install drivers and change the default location to 32-bit
Nope, still no go... Hmm Maybe I'll uninstall drivers and reinstall them. Problem is my PC isn't recognizing phone as a drive, just a device.
Yeah I dunno, gonna give up installing EL13+CWM for now and go get it flashed.
I think the problem is, when I connect the device I get "Samsung Mobile MTP Device Failed"
I downloaded the Samsung USB/Android drivers [USB/Android] and have Kies installed (Kies can't even recognize it though).
Click to expand...
Click to collapse
Maybe you need USB debugging enabled by going to Settings > Applications > Development
Sent from my SPH-D710 using xda premium
Thanks, but no go. Have debugging checked. (I followed the tutorials to the letter)
youre trying to root?
I successfully rooted with the full restore, what I tried to do next was install EL13+CWM and I noticed 2 things:
1st) I can't get past this step: USB Storage Mode is OFF - [Drag down the notification bar and tap on "USB Connected" - should be off by default - pic] (ie when I tap on "USB Connected" it just takes me back to the home screen.
2nd) I continued with the tutorial since it says it should be set correctly as default, but then when the E4GT automated rooting package (not to root, but to install EL13+CWM) it hangs saying "Waiting for device to be connected"
When looking for an answer I discovered this:Why is the install stuck waiting for device to be connected? which gave me some ideas to try, although I've tried all of them to no avail.
I should note that when I go to start->run->devmgmt.msc this:
Code:
Android Phone
SAMSUNG Android ADB Interface
Modem
SAMSUNG Mobile USB Modem
isn't listed there, like it says it should here.
I think I'm going to try to reinstall all the drivers again... Should I do this before or after connected the phone? (The first time I installed the USB/Android drivers from the tutorial before connecting my phone, but I notice after connecting the phone windows goes through the automated process of installing drivers)
<face palm>
http://androidadvices.com/enable-usb-storage-android-devices/
It was so simple, lol... To my own defense this wasn't anywhere in the tutorials
Thanks again for the help guys
EDIT: Well, looks like my problem is still here, the E4GT automated rooting package still hangs searching for device to be connected.
EDIT #2: Omg... Finally figured it out. I thought debugging was enabled (it shows a freakin' check mark) but it has to be a green check mark apparently...
Weee installed CWM, now to create a nandroid and start flashing! Think I'm going for Calkulin's rom with the ICS Theme
Another question!
Hey guys, question:
I got 2 E4GT's flashed over to MetroPCS, both are working fine, but one of them gives me this error on bootup:
Code:
Error 67: Registration failure. Your Sprint data service username
and/or password may be incorrect. Please try again.
Any ideas? Aside from the nuisance, it hasn't seemed to cause any hindrance to the features. The other phone has never given this error, though. Both are running on Calk's rom. Thx guys.
Godswrath said:
Hey guys, question:
I got 2 E4GT's flashed over to MetroPCS, both are working fine, but one of them gives me this error on bootup:
Code:
Error 67: Registration failure. Your Sprint data service username
and/or password may be incorrect. Please try again.
Any ideas? Aside from the nuisance, it hasn't seemed to cause any hindrance to the features. The other phone has never given this error, though. Both are running on Calk's rom. Thx guys.
Click to expand...
Click to collapse
if its only at bootup i wouldnt worry too much. its just the firmware trying to get a sprint connection and it failing.. since youre connected to metro. i would check ##data# > view > data profile/username.. compare whats listed for the one thats working to the one thats giving the error. are they both the same? if not, make them the same and perhaps you can avoid the error. if they are the same... its probably some little data setting somewhere that the phone doesnt like and likely not worth the hassle of poking at it more. like i first said.. the error at boot really isnt a huge deal. if it was a constant error that kept popping up then its something to look at.

cant get old phone number off flashed htc evo 4g to boost mobile

Hey everyone i need your help.
so i bought an htc evo 4g from craigslist already flashed to boost mobile the phone worked fine on the guy who i bought it from he gave me his boostmobile account info to transfer his phone to my acc. so i got home with the phone i transfered his account info to my boost account and now i cant get calls or anything no interenet nothing!! i look at the phone identity and it still has his number under it i called boost and they walked me through a procedure even did ##(some numbers)# to bring up a screen to put in my new number i did tht ut still nothing. it shows his number still in the phone identity im lost please help i spent 170$ and i want my phone to work some1 help me
do you know your Evo's MSL or SPC? If so, try pushing ##123456# (123456 should be your MSL) then on the pop up menu that comes up select "Edit Mode" then you need to change your MDN to your new number and you need to change the MSID to the new one too. If you already talked to Boost then hopefully you wrote these 2 numbers down. If not, call them again and tell them you switched numbers/phones and need to re-enter that info. Just tell them you need the new MDN and MSID so you do not have to sit and have them try and walk you through steps to that are not for the Evo. DO NOT tell them it is an Evo obviously. If you do not know your Evo's MSL then it is pretty easy to get through CDMA WS, pm me and I can help you with that part if necessary. Hope this helps, if you need anything else feel free to ask!
*If I have helped, please take a second to hit my thank you button*
thanks man now i need help with the internet its not working and i have no idea wat to do
Push ##33284# then select EVDO Engineering. Scroll all the way to the bottom an tell me what it says next to AN/AAA
Did you try going to settings, system updates, update profile yet? Also it can take up to 48 hours for everything to work IF it says 1- authenticated after AN/AAA
Sent from my PC36100 using xda premium
it says to 2=failed authentication
ive also tried up dating profile it would let me
If it says authentication failed then your AAA and HA keys are wrong. Did you get the donor phone from the guy you bought the Evo from???? If you did then it will be pretty simple to pull the correct AAA and HA keys from it.
If you do not have the donor, you might try ##786#, then hit menu then hit reset. Be warned, it will reset everything back to factory so make sure you back up anything worth saving first. When the phone resets itself, it will try to perform an OTA activation. I am wanting to say it should provision the AAA keys on its own after that (If I am wrong on this part, please feel free to step in and correct me guys)
what do i need to save to be backed up and i dont have doner phone
Dont think you can do that, tell you what I did. I bought an Evo also off ebay fixed the glass and found someone to flash it to boost. after 2 months with phone the 3g went out, tried to get help from flasher but no go, I found a guide myself and started testing, first flash success, so wanted to reflash my phone and only way to get it done was to buy a donor phone, attach it to your boost account, hook it up pull the info, reflash EVO and all done. You cant just take a phone and move it to your account, wont work.
You should have just left it the way it was, now you'll need to get a donor phone and start over, I did and doing fine now.
If you need help let me know.
Yep, I agree. If you do not have the donor, I would suggest buying a new one. Even if you do manage to fix data this time, you will have more problems later. The fact that you did not get the donor might mean the Guy is activating more than one evo with it and that means you might start getting the error 16 in the future. I have always given the donor back to the person I flashed for because I do not need it and more importantly I have no legitimate reason for keeping it.
Sent from my PC36100 using xda premium
Would this be the same steps if i call Boost and change my old number, im giving my EVO to my daughter but she doesnt want my number.
It will be the same steps as to changing the numbers in the setting once i enter the MLS???

Flashing E4GT to boost mobile, need help PLEASE. :(

I follow the steps in this thread TO THE LETTER. Now I can't get data on my phone, can't call out or anything. I started with a Sanyo Incognito, and was using it as the cloned from, and my E4GT as the cloned to.
It's really annoying. Can anyone tell me if there's something wrong with the steps, or if there is any other way that is easier? I really need my E4GT on and running.. :crying:
If by "can't call out," you means that your phone isn't able to place calls, then forget data for now. If your calls and texts aren't working as they should, then you're skipping a step or two. Something went wrong with your MEID repair... go back and make sure that it went through as intended, or do it again if needed.
Otherwise, you need to verify that your Sanyo has data and that you are extracting the correct info from it. Either way, you're probably better served re-reading the thread and posting there for more help. Good luck.
when you make a call do you get code 16 at the end of the message?
If so do this I had this same issue and it fixed it right up:
http://blog.pugetsoundelectronics.c...-code-16-on-a-flashed-boost-mobile-phone.aspx
I followed a different guide, and it didn't work at first. But in all of these guides, nowhere dis it say to input sprint ha and aaa keys into the 0 slot and boosts let's into the 1 slot. A key piece of info that they never wrote up.
So, I'm probably going to do a revamped write up on it in a few days. Since they didn't get it right.
And yeah, I got the error 16 code. It transferred me to boost, I told them I was using a Sanyo Incognito, and she fixed it right up! Just make sure you say you're using the old phone, not the new one you flashed to.
Sent from my SPH-D710 using XDA

[Q] Need help getting an EVO on MetroPCS...

Hi all,
Thanks for a least looking at this thread and providing feedback. So here is my situation.
1. Bought EVO 4g from a friend who bought new phone and transferred his phone number from Sprint to Verizon so the phone does not have access to Sprint's network.
2. My wife has a crappy MetroPCS phone I would like to replace with the EVO 4g.
3. I have all the software that has been talked about in many threads here: diagnosis drivers, cdma workshop, prl, and a few other things which I can't remember.
4. I have rooted the phone with S-OFF and currently running MetrogenMod 4.5
Q1: Does the phone need to be on the Sprint network in order for me to get the phone working on MetroPCS?
Q2: After reading all of the forums it sounds like the phone will magically work on MetroPCS' network, but something tells me I'm missing something?
Q3: How do I get my wife's phone number transferred over to this phone? It seems I can only transfer the current phone number that the phone has even though it is not mine.
Thanks again in advance and I apologize if these questions have been asked before, but I did not see any.
Jamdev12
PS: Ok after reading and getting familiar with this stuff it seems there are two ways of doing this, but I rather get some expertise from someone first :
1. Easiest method. Call MetroPCS and request an ESN swap. Since I own both phones I don't foresee this as illegal and I've heard of people successfully getting this done.
2. Hardest method and possibly bricking the phone. Call Sprint and request MLS number. Then use the software that is available to get ESN from old phone and write it to the new phone. If done right, the new phone will act and connect as if it were the old phone.
To all, am I correct in the above assumptions?
You shouldn't need to call sprint for your msl..search the play store for "msl reader". It'll save you that hassle anyways. ....Did a quick search and found this guide over on af.. http://androidforums.com/evo-4g-all-things-root/538899-guide-metro-pcs-donor-flash.html .. I flashed to boost so thats the extent of my experience. Hope it helps.
Hi nrvlljr,
Thanks for this link. I will be trying this tonight and if I get it working, I'll post my findings. Wish me luck. :good:
jamdev12
jamdev12 said:
Hi nrvlljr,
Thanks for this link. I will be trying this tonight and if I get it working, I'll post my findings. Wish me luck. :good:
jamdev12
Click to expand...
Click to collapse
Break a leg buddy..Just make sure to follow the instructions to a tee and you'll be fine.
nrvlljr said:
Break a leg buddy..Just make sure to follow the instructions to a tee and you'll be fine.
Click to expand...
Click to collapse
Hi nrvlljr,
Thanks for the encouragement. Unfortunately it did not work for me. For some reason the phone is unable to log into the MetroPCS network as my old phone. One thing that confused me about the instructions was to save the nam1 and Nam2 data for my old phone because not once after that did I use this data to reprogram the new phone. All it says is to replace the ESN and meid numbers in the nvm folder and reboot.
Next I tried the MetroPCS tutorial in the developer forum to get MetroPCS working, ROM and everything without success. I'm able to connect via roaming, but not on my current phone number.
Anyways, if you or anyone here has any ideas, I would gladly appreciate it. At least the phone is not bricked, yet.
Thanks in advance.
jamdev12 said:
Hi nrvlljr,
Thanks for the encouragement. Unfortunately it did not work for me. For some reason the phone is unable to log into the MetroPCS network as my old phone. One thing that confused me about the instructions was to save the nam1 and Nam2 data for my old phone because not once after that did I use this data to reprogram the new phone. All it says is to replace the ESN and meid numbers in the nvm folder and reboot.
Next I tried the MetroPCS tutorial in the developer forum to get MetroPCS working, ROM and everything without success. I'm able to connect via roaming, but not on my current phone number.
Anyways, if you or anyone here has any ideas, I would gladly appreciate it. At least the phone is not bricked, yet.
Thanks in advance.
Click to expand...
Click to collapse
Ok, so after more fiddling, I was able to get Data working, but no talk and text. To get data working, I had to run DFS to import the latest PRL from MetroPCS into the phone. Once I did that and rebooted the phone, 3G started to work, but still could not get Talk and Text to work.
Then I did the worst thing that I could have done, I think. I order for me to get Talk and Text working, I took the phone to a MetroPCS. Well, I let them run the phone through Houdini and now Talk and Text work, but I can't get 3G to work even though I have a plan that has Talk, Text and Data and I have reloaded the MetroPCS PRL in the phone.
Has anyone ran into this problem? Would I have to get my phone off the MetroPCS database in order for me to get 3G running again? Any help would be gladly appreciated.
Hello, I, new here..
I have literally tried everything i have read from forum to forum, post to post, from installing DIAG drivers to QPST, apn, anycut, everything i have found and cannot make my EVO to connect to the web. My sister had this phone fully working (except 4G) and now that i transferred it to my account i make calls and text but not MMS or WEB. less 3G. I am very frustrated but willing to keep on reading instructions if anyone would be able to help!!. Thank you very much and you guys are doing a very great job. miraculously i am obtaining knowledge i never even though it existed! unfortunately havent being able to solve my problem.
jamdev12 said:
Ok, so after more fiddling, I was able to get Data working, but no talk and text. To get data working, I had to run DFS to import the latest PRL from MetroPCS into the phone. Once I did that and rebooted the phone, 3G started to work, but still could not get Talk and Text to work.
Then I did the worst thing that I could have done, I think. I order for me to get Talk and Text working, I took the phone to a MetroPCS. Well, I let them run the phone through Houdini and now Talk and Text work, but I can't get 3G to work even though I have a plan that has Talk, Text and Data and I have reloaded the MetroPCS PRL in the phone.
Has anyone ran into this problem? Would I have to get my phone off the MetroPCS database in order for me to get 3G running again? Any help would be gladly appreciated.
Click to expand...
Click to collapse
What kind of phone did you use for the donor flash? I had this problem with my old evo 4g. I had it donor flashed from a freeform 1. Even though I was paying for 3g the evo didnt get it. I assumed it was because my freeform didnt have 3g so the ESN being read by the network on my evo didnt require it to send 3g data. Just a guess

[Q] Sprint to Boost with Galaxy Rush as donor

Ok I have gone through several guides, trying to get this to work. All guides mention using the incognito, but that cant possibly be the only phone that works.
I have the Galaxy Rush, Boost Mobile, 3g. I know it wont support 4g. I just want a nicer phone and happened to have teh E4GT.
I have the tools from the various incognito guides, and I get stuck at the step where I get CDMA Workshop to read my phone. I connect, I dial ##DIAG# and enter my MSL, then connect and click read. I get a failed message. Since I know my MSL already, I try skipping ahead to getting the NV items, using the MSL as the SPL and get failed.
Any idea what I can do to get this working? I have my eyes set on this phone upgrade and will not rest until I get it working xD
Have you tried this?
http://forum.xda-developers.com/showthread.php?p=20850052
Sent from my SPH-D710BST using xda premium
Yeah thats the guide ive been following but it talks about the incognigto. I tried the same steps for my rush, but I cant get my cdma workshop to read my phone, only connect to it.
Cortal said:
Ok I have gone through several guides, trying to get this to work. All guides mention using the incognito, but that cant possibly be the only phone that works.
I have the Galaxy Rush, Boost Mobile, 3g. I know it wont support 4g. I just want a nicer phone and happened to have teh E4GT.
I have the tools from the various incognito guides, and I get stuck at the step where I get CDMA Workshop to read my phone. I connect, I dial ##DIAG# and enter my MSL, then connect and click read. I get a failed message. Since I know my MSL already, I try skipping ahead to getting the NV items, using the MSL as the SPL and get failed.
Any idea what I can do to get this working? I have my eyes set on this phone upgrade and will not rest until I get it working xD
Click to expand...
Click to collapse
I'm Also Trying to find a way to access the NV items on my galaxy rush and any help would be much appreciated. So far ive gotten my MSL/SPC and connected using cdmaworkshop, but one thing I noticed is even after I send the MSL/SPC the NV items containing the AAA/HA passwords always say access denied. and the galaxy rush doesnt unlock with the default samsung password. Im not familiar with using QXDM to know how to connect it to the phone, but I think thats the direction we need to go to find our HA/AAA passwords
any luck with reading ha aaa?
yeah any progress would be extremely helpful

Categories

Resources