unrooting - G2 and Desire Z Q&A, Help & Troubleshooting

i want to unroot my g2 phone i used visionary n gfree to root it but i feel like idk what im doing rly with using roms so i just wanna unroot it n get it over with. how can i do this? i was searching the forums but idk which way is best for me and with the method i used.

huhhhhh said:
i want to unroot my g2 phone i used visionary n gfree to root it but i feel like idk what im doing rly with using roms so i just wanna unroot it n get it over with. how can i do this? i was searching the forums but idk which way is best for me and with the method i used.
Click to expand...
Click to collapse
here you go ... read the wiki
http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision
the last section is return to stock ... read that ... also gfree also has a built in feature to go back to factory settings and S-on... all there in the wiki ....
all the best

Related

[Q] will there be a one-click permroot for the g2?

i'm not really comfortable with using adb and terminal to root my phone because im not willing to turn it into a $300 brick lol anyone know if there will ever be a one click perm root?
urfavoritemazn said:
i'm not really comfortable with using adb and terminal to root my phone because im not willing to turn it into a $300 brick lol anyone know if there will ever be a one click perm root?
Click to expand...
Click to collapse
there is a program....hold on ill find it brb.....
FOUND IT!
http://android.modaco.com/content/software/320350/19-nov-r14-visionary-one-click-root/
it is called Visionary r14 and while its not 1 click it did mine in 2!
load on phone click temproot
also make sure usb debuggin is checked!!
then after it temp roots open up app again and click attempt perm root now
viola! thats all i did and been running roms ever since! hope that helps!
That might also brick your phone... you should get insurance on your phone then its only a 130 dollar brick but seriously use the rage method or use the new real root/sim unlock. Its stickied in the dev section. Its about as easy as it can be.
Sent from my HTC Vision using XDA App
I've never been excited about one-touch root methods. One small thing goes wrong, a glitch in the program or something and boom, dead phone. At least the other way if I brick it, it's my fault.
I'm practicing adb in preparation for the rooting of my phone, I'm aiming for a late December root.
AbsolutZeroGI said:
I've never been excited about one-touch root methods. One small thing goes wrong, a glitch in the program or something and boom, dead phone. At least the other way if I brick it, it's my fault.
I'm practicing adb in preparation for the rooting of my phone, I'm aiming for a late December root.
Click to expand...
Click to collapse
Sounds sensible to me, I think the rage method is a lot better, at least you're in control over what it's doing and can see every step.
yea i would love a one quick root im a newbe but would like to root this phone
clamman said:
yea i would love a one quick root im a newbe but would like to root this phone
Click to expand...
Click to collapse
Like shortlived and stevie said just try the rage method its fairly simple. Just take some time to learn how to use adb and then it'll be a breeze. Also adb is almost a necessity when it comes to rooting/modding android phones. Also if u get stuck or confused bout anything there are plenty of useful threads just search lol good luck
Sent from my HTC Vision using XDA App
Adb is very simple. All you need to know for the rage method is "adb push" if you can open a cmd window on your pc, learn a few dos commands like "cd" and "cd.." then your all set. There are some very good guides to get you set up with adb just check the stickies. And good luck!
Sent from my HTC Vision using XDA App
Just use visionary r14 to temp root. then look through the overclocking thread and find the GScript method of Overclocking. I permanently rooted my first g2 and then the sd card gave out on me and I sent in it for warranty. Idk if they checked to see if its rooted or not but I haven't been charged. The only issue with perma rooting the g2 is the fact that if you screw up they can see if you've tampered with it and if you've only temp rooted it, from what I understand, the temp root is much safer but you have to root it every time you reset your phone (turning it back on from an off state). small price to pay imo. GL though!
Get over your fear, read over the instructions, and root using rage. It took me a half-hour to root my phone, and that was the first thing I did when I got it.
I think the new easiest way is gfree? I haven't done it because I was already permrooted. It also should unlock your phone (sim, radio, some other thing I don't remember.)
Sent from my HTC Vision using XDA App
There is a video that walks you thru rooting with VISIONary r14. I followed the video and worked perfectly. Just a note I unistalled my version of VISIONary first then followed there video on temp-rooting first and then onto perm-rooting. I bricked my first G2, got it replaced and was scared to try again, but if followed there videos and worked out perfect, now running CyanogenMod 6.1 rc4 and my phone is super charged. heres the links thanks to dcogen:
Do this to gain temp root:
http://theunlockr.com/2010/10/20/how...ionary-method/
Then this to gain permanent root:
http://theunlockr.com/2010/11/30/how...g2-htc-vision/
Then this to flash a recovery and load a custom ROM:
http://theunlockr.com/2010/11/30/how...g2-htc-vision/
And here's how to completely unroot for good measure :
http://theunlockr.com/2010/12/01/how...g2-htc-vision/
Note: I was running stock OTA updated rom, rebooted to un-temproot, installed VISIONARY r14 from MODACO's website and followed the videos to the tee(first temproot video, even though I already knew how to temp root, I followed exactly what they did in the video to temp root. second Perm rooted following the video, then installed custom ROM per video), I used the link in the perm root video to download the wpthis.ko file and the hboot.img
http://www.youtube.com/user/BlackPrince310#p/u/7/tU9zn_BEth4
Try this. Worked great for me.
joemm said:
There is a video that walks you thru rooting with VISIONary r14. I followed the video and worked perfectly. Just a note I unistalled my version of VISIONary first then followed there video on temp-rooting first and then onto perm-rooting. I bricked my first G2, got it replaced and was scared to try again, but if followed there videos and worked out perfect, now running CyanogenMod 6.1 rc4 and my phone is super charged. heres the links thanks to dcogen:
Do this to gain temp root:
http://theunlockr.com/2010/10/20/how...ionary-method/
Then this to gain permanent root:
http://theunlockr.com/2010/11/30/how...g2-htc-vision/
Then this to flash a recovery and load a custom ROM:
http://theunlockr.com/2010/11/30/how...g2-htc-vision/
And here's how to completely unroot for good measure :
http://theunlockr.com/2010/12/01/how...g2-htc-vision/
Note: I was running stock OTA updated rom, rebooted to un-temproot, installed VISIONARY r14 from MODACO's website and followed the videos to the tee(first temproot video, even though I already knew how to temp root, I followed exactly what they did in the video to temp root. second Perm rooted following the video, then installed custom ROM per video), I used the link in the perm root video to download the wpthis.ko file and the hboot.img
Click to expand...
Click to collapse
Exactly what I did to the T. Great instructions and explains them in dummy form on the vids, as well as written.
Sent from my HTC Vision using XDA App
SuperCID, SIMUnlock, Radio S-Off is the new Permroot. Its actuallty true permroot. Those of you who think your permrooted technically arent. You just have a "hacked" Hboot. Doing the gfree method allows you to
1: Flash pc10img (stock rom) without the whole hex editing process and also flash roms from another carrier.
2: Your sim is unlocked (maybe wont matter for some of you but its nice to have for travel)
3: S-off, need I say more.
When flashing back to stock you also keep S-Off and do not lose it via gfree and from what I'm hearing soon there will be a way to revert back to S-On via gfree. Just incase we need to send our phones back in for any reason. Cant leave any trail of evidence.
many thanks
finally got the courage and did it. now running cyanogen. thanks so much guys.
luis86dr said:
SuperCID, SIMUnlock, Radio S-Off is the new Permroot. Its actuallty true permroot. Those of you who think your permrooted technically arent. You just have a "hacked" Hboot.
Click to expand...
Click to collapse
Sorry that's not right. SuperCID/SIM Unlock/Radio S-OFF doesn't have anything to do with perm root. Yes, this is the new way of totally unlocking your phone, but you can be full perm rooted and still have radio S-ON.
Seems to be that some people use the term "permanent root" to refer to a full unlock rather than just the rooting ability itself (i.e. run as the root user).
I think what you means to say is that those you who think you are S-OFF without running gfree technically aren't, you've got an engineering hboot which makes it look like S-OFF.

So need help perm rooting

Okay I have a G2, just got it and I need to perm root it. I looked at the sticky guide but most of the links aren't loading for me, don't know why, either thread isn't there or link expired or w/e. I don't know, but I need some help.
First, how do I find out if I have 1.72 or an earlier version
Second, do I use "rage"? method or VISIONary and what's the latest version of visionary?
Third, about how long does the process take?
Any help is appreciated.
James_Caliber said:
Okay I have a G2, just got it and I need to perm root it. I looked at the sticky guide but most of the links aren't loading for me, don't know why, either thread isn't there or link expired or w/e. I don't know, but I need some help.
First, how do I find out if I have 1.72 or an earlier version
Second, do I use "rage"? method or VISIONary and what's the latest version of visionary?
Third, about how long does the process take?
Any help is appreciated.
Click to expand...
Click to collapse
Every thing you need to know about rooting is in here http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision just start reading from Rooting the Vision (G2/DZ) and DHD or you can read the whole page. Don't use VISIONary, you have a chance of getting stuck in a boot loop, use Rage and GFree. You'll need the android SDK to get ADB. I'm not sure how long rooting takes, I haven't done it yet as I don't have my G2 until next week but I have been reading about root for the past week. From what I know, 1.72 is only if you have a Desire Z. If you have any more questions, I'm sure me or another member can answer you.
KoolKidsKlub said:
Every thing you need to know about rooting is in here http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision just start reading from Rooting the Vision (G2/DZ) and DHD or you can read the whole page. Don't use VISIONary, you have a chance of getting stuck in a boot loop, use Rage and GFree. You'll need the android SDK to get ADB. I'm not sure how long rooting takes, I haven't done it yet as I don't have my G2 until next week but I have been reading about root for the past week. From what I know, 1.72 is only if you have a Desire Z. If you have any more questions, I'm sure me or another member can answer you.
Click to expand...
Click to collapse
Do you know what the 1.72 # refers to? Is it the build number or something else?
Thanks a lot for your help though. I'll start reading
James_Caliber said:
Do you know what the 1.72 # refers to? Is it the build number or something else?
Thanks a lot for your help though. I'll start reading
Click to expand...
Click to collapse
If you have a Tmobile G2 (from your first post, I assume you do) you don't need to worry about 1.72 it for the Desire Z. There are three methods to root with, them being Visionary, Rage, gfree. Gfree by far has caused the least amount of problems. If you know ADB rooting should be pretty simple, just follow the wiki on rooting with gfree. If your not familiar with ADB, there are methods to root without having to use it. But its always good and recommended to have it installed and running. There are guide here to help walk you thru it, but if for some reason its to difficult or you don't quite understand it, like I said there are methods to root with out it. There is a modified way to run gfree with your home computer and terminal emulator on your phone. Also the visionary method too, now many people have had problems with visionary, I'm not one of them, it is how I rooted my phone, but I can't stress the importance of reading and putting the time into understanding what you are and want to do to modify your phone, far to many people act before understanding and run into many problems including bricking there phones, I know some of the threads are really long in this forum but that's no excuse, whenever I try something new I read the entire thread first start to finish because any problems you may have, the solution has probably already been givin somewhere in the thread. There is no rush to jump into something you don't understand, my suggestion is to invest the time to read and understand how to root you phone first.
Sent from my HTC Vision using XDA App
Even if you root using rage, you can still install and use gfree on your phone. I can confirm that it works.
Just stay away from Visionary.
blackknightavalon said:
Even if you root using rage, you can still install and use gfree on your phone. I can confirm that it works.
Just stay away from Visionary.
Click to expand...
Click to collapse
This.
This is my first Android phone and I was able to follow the Wiki and root it pretty easily. The only part I didnt do was installing the Engineering Hboot. Just cause it is labeled as optional and unnecessary and the warning about bricked phones scared me away from it.
This ADB Guide for Noobs was pretty helpful in the process too
http://forum.xda-developers.com/showthread.php?t=865685
With that link and the Wiki your all set.
boost3d23 said:
This.
This is my first Android phone and I was able to follow the Wiki and root it pretty easily. The only part I didnt do was installing the Engineering Hboot. Just cause it is labeled as optional and unnecessary and the warning about bricked phones scared me away from it.
This ADB Guide for Noobs was pretty helpful in the process too
http://forum.xda-developers.com/showthread.php?t=865685
With that link and the Wiki your all set.
Click to expand...
Click to collapse
You're missing out with the engineering bootloader. You'll have more recovery options with it installed.
blackknightavalon said:
You're missing out with the engineering bootloader. You'll have more recovery options with it installed.
Click to expand...
Click to collapse
I might install it later on, if that is possible and wont cause issues.
boost3d23 said:
I might install it later on, if that is possible and wont cause issues.
Click to expand...
Click to collapse
Yeah that's what I'm going to do. I'm going to root the phone then when I feel more comfortable, I'm going to flash the engineering HBOOT. It's not that I'm scared, well I sorta am but I would rather not do something that isn't necessary. I'm coming from a rooted G1 so I know what it does and everything, I just don't think its necessary. The way I look at is is this, if you flash the HBOOT then your a lot safer because you can use fastboot flash to save your self from a semi-brick, but at the same time, flashing the HBOOT is also dangerous because you can brick your phone beyond repair.
*bump*
Sorry guys, I know this is an old thread, but isn't it better to post on something existing rather than creating a new thread? Hopefully I'm right...
Anyhow, I'm a Sprint convert and I now have the G2. Rooting the Samsung Epic I had was super easy, because I downloaded a one-click script that did everything for me. However, I'm fairly tech-savvy and accomplished just about everything for the rooting procedures using gfree and rage.
However, when I use gfree_verify, I get the message 'verify could not initialize the device!'. I think I run into my problem when I get to this part:
# /data/local/tmp/root
# sync
when I run the first line, I get a message about file existing that it says to expect... but it also says that "the rest of the script should still run ok". Well, after I get the file existing message, it goes back to the prompt. If there was a script that ran after that message, wouldn't I see other messages before it returned to the prompt?
I hope I'm making sense... and I hope I posted this in the right place. I'm dying to get a Sense ROM on my phone, but I need to get some sleep for work tomorrow. Any help that everyone could provide would be EXTREMELY appreciated Thanks so much!!
...EDIT...
Apparently, despite my lack of luck with verification, root is in place in my phone and has stayed after reboot. I've flashed clockwork and have used Superuser access... all seems to be well! Thanks anyway

getting a new g2 on Friday

so i got the promotion to get a free g2 but heres a few questions im thinking that it will come with the latest rom can i root it ive been looking through a ton of guides and im confused what should i do. which method work to gain perma root
cudahy_boy said:
so i got the promotion to get a free g2 but heres a few questions im thinking that it will come with the latest rom can i root it ive been looking through a ton of guides and im confused what should i do. which method work to gain perma root
Click to expand...
Click to collapse
It may come with the latest ROM but I more suspect that it will come with the original (shipped) ROM and immediately receive the OTA update. The good news is that there are no issues rooting even if you have the OTA applied (I think some of the rooting guides assume you do) so I would go ahead and apply the OTA if prompted. This is different than the Desire Z where the latest updates can make rooting more complicated.
The most widely recommended method of obtaining permanent root is the "gfree" method, it will permanently root your phone and at the same time will SIM unlock it as well as set the CID so you could load whatever carrier ROM you might want to.
The only issue most people seem to have with using the gfree method is getting ADB up and running and talking to your G2. Using ADB isn't (as far as I know) strictly necessary to make gfree work but it's easiest and all the guides (that I've seen) have you use ADB.
Here is the section of the wiki showing you how to use gfree to root your phone: http://forum.xda-developers.com/wik...cess_.28Permanent_Root_.2F_.22Permaroot.22.29
For instructions for getting ADB up and running I would look here:
http://forum.xda-developers.com/showthread.php?t=865685
Check out unlockr.com on rooting g2. They use the Visionary method. Took me only couple mins.
Sent from my HTC Vision using XDA App
GhostZini said:
Check out unlockr.com on rooting g2. They use the Visionary method. Took me only couple mins.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Could you please stop telling people to use the VISIONary method!? That method has a risk of putting the user's phone into a boot loop! Please know you what your talking about before attempting to help some one, it can make the difference of bricking a phone and rooting a phone. Rage and GFree DOES NOT have a risk of putting your phone in a boot loop. Out of all the people that have messed up their phone, EVERY ONE of them that I have seen has used the VISIONary method. I'm not trying to be mean, but please be more careful when giving advice. I know your just trying to help, and I respect you for that but please do no tell some one to do the VISIONary method.
Sorry mate, I had no clue bout that. I had no loop but i see your point
Sent from my HTC Vision using XDA App
nevermind about my quesiton lol
Thanks for this question, it answered mine so I didn't have to ask. Will be using g-free way shortly.

[Q] Can I go back to stock after rooting and romming

So recently I warrantied a G2 and was glad I never rooted and rommed it with CM7. I had CM on my old G1 and would love to get into it again. Can I go back to stock in case I need this one warrantied? I don't want them to know I did anything with it. The other topics that popped up in the search weren't specific with warranty. Thanks.
Yes there are procedures you have to follow in order to unroot and s-on again if you have to return it for warranty reasons or whatever reason you have. Its pretty simple... but it matters what method of rooting you did. Like unforgivens way of rooting you have to hex edit and while on gfree you can flash the PC10IMG.zip but still get s-off and you have to follow more procedures i think to get s-on...
Sent from my HTC Vision using XDA App

[Q] Rooting my HTC Desire Z

Hello i want to root my HTC DZ so i can install a costom rom, but i'm not excactly sure if i have to downgrade my phone.
the phones build number is 182.405.1
Can i instal costom roms on my phone and what is the best app to use for rooting my phone.
http://forum.xda-developers.com/wik...sion#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD
have fun!
So i have to downgrade first since i have version 1.82 ?
Also i've read many articles and i came across something called VISIONary+ Can i root with this app or will i just screw up my phone?
well so far Q&A?
johrie91 said:
So i have to downgrade first since i have version 1.82 ?
Also i've read many articles and i came across something called VISIONary+ Can i root with this app or will i just screw up my phone?
Click to expand...
Click to collapse
yes, you are required to downgrade as only 1.34 is rootable at the moment.
you'll get 15 different opinions regarding whether or not visionary is safe, but the general consensus is that it is okay to use to obtain temp root, but very risky to try and perma-root with it.
oke i started downgrading but i'm getting an error "Main version is older update failed" what did i do wrong?
EDIT: Nvm what i did wrong was the usb setting it should be Charge only
..
so did you get it to work just fine after downgrading ?
Using visionary is harmless. I constantly use it to root and unroot my g2. The method you may have come across could be slightly different than what I read so I would say compare similar facts between the two. I got my rooting info from here: http://theunlockr.com/2010/10/20/how-to-root-the-t-mobile-g2-htc-vision-visionary-method/ . Theunlockr has video tutorials posted as well as text tutorial. So using this method should help majorly.
Sent from my HTC Vision using XDA App
B6gSix said:
Using visionary is harmless. I constantly use it to root and unroot my g2. The method you may have come across could be slightly different than what I read so I would say compare similar facts between the two. I got my rooting info from here: http://theunlockr.com/2010/10/20/how-to-root-the-t-mobile-g2-htc-vision-visionary-method/ . Theunlockr has video tutorials posted as well as text tutorial. So using this method should help majorly.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
does visionary still temp root htc desire z 1.82.. ? wouldnt work for me when i last tried )=

Categories

Resources