Is there any way to boost my 4g signal? Its around the corner , im just not close enough..thanks
Sent from my PC36100 using XDA App
As far as I know, no. Not unless you get a clear module, which is like your own hotspot, but you have to pay for it per month. Also people have had issues with the signal being lost/weakens when going from outside to inside buildings.
Airave wont boost your wimax, totally diffrent everything. Not sure if there is a wimax booster
Sent from my PC36100 using XDA App
protoadies said:
Airave wont boost your wimax, totally diffrent everything. Not sure if there is a wimax booster
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Typo, I meant to say clear. But the clear hotspot would be his only option. Or use 4G outside.
Thanks guys, and i got an airwave its great for 3g boost in home but not 4g
Sent from my PC36100 using XDA App
fierceeagle2003 said:
Thanks guys, and i got an airwave its great for 3g boost in home but not 4g
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Well as I said for a 4G boost, you'd have to get a Clear hotspot, which is for 4G, or use 4G outside.
fierceeagle2003 said:
Is there any way to boost my 4g signal? Its around the corner , im just not close enough..thanks
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
You could try aluminum foil.
Actually, there is way to adjust your Wimax setting to allow it to pick up weaker signals. You need your MSL code. Do a ##3282#, go to edit mode, enter the MSL code, go to Wimax, and find the "WiMAX_Entry_RX(RSSI)(dBm) and adjust it from -89 to -95 and continue in small increments until you find a sweet spot.
I got this from a thread on here that another member created. I tried searching for it to post this but I couldn't find it. I take no credit for figuring this out.
rugedraw said:
Actually, there is way to adjust your Wimax setting to allow it to pick up weaker signals. You need your MSL code. Do a ##3282#, go to edit mode, enter the MSL code, go to Wimax, and find the "WiMAX_Entry_RX(RSSI)(dBm) and adjust it from -89 to -95 and continue in small increments until you find a sweet spot.
I got this from a thread on here that another member created. I tried searching for it to post this but I couldn't find it. I take no credit for figuring this out.
Click to expand...
Click to collapse
If I am not mistaken, that only works on a sense rom, correct? Then he'd have to flash black.
teh roxxorz said:
If I am not mistaken, that only works on a sense rom, correct? Then he'd have to flash black.
Click to expand...
Click to collapse
Yea, that's right......AOSP roms lose EPST functions. Being a Sense user, that totally slipped my mind. However, he has not mentioned if he is on an AOSP rom, so it may still help him.
tgruendler said:
You could try aluminum foil.
Click to expand...
Click to collapse
lol, btw.
tgruendler said:
You could try aluminum foil.
Click to expand...
Click to collapse
Aluminum foil lol
Sorry took so long, im on sense rom..ill have to try it out
Sent from my PC36100 using XDA App
Ill try it out
Sent from my PC36100 using XDA App
http://forum.xda-developers.com/showthread.php?t=925898
i havnt tried it yet, not close to 4g. let us know how it goes.
Yeah i tried it , does not seem to change any thing while im in my house. Ill try outdoors and ill let u know
Sent from my PC36100 using XDA App
Related
So i get about .54 mbs on my 3g but thats about it. ive got 1.50 mbs in the same spot in my house before. my radio and wimax are all updated. what can i do?
BigSmoke53 said:
So i get about .54 mbs on my 3g but thats about it. ive got 1.50 mbs in the same spot in my house before. my radio and wimax are all updated. what can i do?
Click to expand...
Click to collapse
try this..its a script that should make speeds better from what the comments show..flash via script manager....here is the main page for more help if u need. let me know if it works thanks.
http://forum.xda-developers.com/showthread.php?p=15948434#post15948434
Sorry I forgot to add that I've tried that. I've tried it two or three times and never noticed a difference
Sent from my PC36100 using XDA Premium App
BigSmoke53 said:
Sorry I forgot to add that I've tried that. I've tried it two or three times and never noticed a difference
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
no problem..i guess you can try and get out of your contract no ETF and switch carriers lol
jonathan413 said:
no problem..i guess you can try and get out of your contract no ETF and switch carriers lol
Click to expand...
Click to collapse
Lol, i wish it was that easy but i love my evo. I thought there was away to switch my signal or to flash something besides radio but im a noob.
BigSmoke53 said:
Lol, i wish it was that easy but i love my evo. I thought there was away to switch my signal or to flash something besides radio but im a noob.
Click to expand...
Click to collapse
you can try a verizon prl..have you done that
No I haven't. I will look into that. I wish my phone could switch prls on the fly for best service on its own.
Sent from my PC36100 using XDA Premium App
can u run a verizon prl when not roaming and not get into issues with sprint ? i know roaming u can get kicked off...how when not roaming ? can they even tell ur using verizon ?
Has anyone tracked down a good radio fix when wimax doesnt stay connected? I know they have radio updates but does anyone have one in particular they would recommend?
Sent from my SPH-D710 using XDA App
hillstead22 said:
Has anyone tracked down a good radio fix when wimax doesnt stay connected? I know they have radio updates but does anyone have one in particular they would recommend?
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
No. Unless you understand the risks do not flash a new radio ("modem" in Samsung land), there is currently no way to go back to stock (EG30).
Sent from my SPH-D710 using XDA App
There was a thread here on tweaking that. You have to dial a number on your phone and edit something.
Sent from my SPH-D710 using xda premium
CODteabagger said:
There was a thread here on tweaking that. You have to dial a number on your phone and edit something.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
##DATA#
Sent from my SPH-D710 using XDA App
Tweaking the radio
I know there was a fix to tweak the radio by dialing certain numbers, but i'm curious if anyone has done it and saw a big improvement in their 4g signal.
Considering sprint will probably not expand wimax anymore, i'm screwed with this weak signal.
daneurysm said:
##DATA#
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
Both posts above are right. It is in here. I will try and post a link if I can find it. I did the same tweaks on my OG Epic and they work well for me. There are certain setups depending if you are always in a good signal area or if you want it to connect faster,etc
Sent from my SPH-D710 using xda premium
Essentially you are looking to lower the threshold for signal strength to connect and raise the timers for disconnect. It's not going to make your signal any better. It's only going to make it more usable--maybe. It could also keep you "connected" and not transmit or receive anything. Not too sure how that would be useful.
Well, i know there are things you can type for sure, but i've never heard from someone that has tested it and said it improved their 4g experience.
Was trying to find a signal amplifier because i'm in a weak 4g spot, but i'm not spending 600 bucks for something i should be getting anyway with my "premium data" 10 dollar addition to my bill from sprint.
Pisses me off that they expect their customers to be happy they are switching to LTE. Me and my expensive wimax phone are so happy sprint is changing their cell tech to LTE..
daneurysm said:
Essentially you are looking to lower the threshold for signal strength to connect and raise the timers for disconnect. It's not going to make your signal any better. It's only going to make it more usable--maybe. It could also keep you "connected" and not transmit or receive anything. Not too sure how that would be useful.
Click to expand...
Click to collapse
They are useful if you are in a good or fair 4g area. I live in a full bar 4g area and shortened the connect time and lowered the minimum signal strength a bit. I used same settings that I had on my OG Epic. If you don't get it now it most likely wont do anything or MAY get you 1 bar if you are in a fringe area
Sent from my SPH-D710 using xda premium
So I've been playing around with some settings and after i changed my hdr/1x settings from Hybrid mode to Evdo mode I'm getting 1mps down as opposed to 0.10mbps on Hybrid mode. When on Hybrid speedtest app shows my connection as EvdoA, but in Evdo mode it shows Evdo0 and my speeds are pretty decent. Only catch is i can't send text messages. I understand Evdo mode = 3g, Cdma mode = 2g/1xrtt, and Hybrid = both working together. So is this a sign that maybe our bad speeds can also be from Hybrid mode not playing nice? If it weren't for me not being able to send text messages (mms messages work fine for some reason) i would force it to do strictly 3g..
Edit: Added two screenshots. 1st one on evdo mode and the 2nd on hybrid mode. All my test were back to back and performed the same. I find this strange. Well i just wanted to share my discovery lol...
Sent from my SPH-D710 using XDA
I'd like to give this a shot.... Where are these settings located?
Sent from my SPH-D710 using XDA
Agreed. If anyone has any idea what to do about texting as well we may have something here.
RayTrue04, looks like we reside in the same area. Would be nice to see better 3G speeds in Hartford. I used to have a crappy LG Optimus T on T-mobile, and I got 2Mbps down. Then I switched to Sprint and the E4GT expecting to see better speeds, and Sprint's "4G" can't even compete with T-mobile's 3G speeds. I do love my E4GT though.
God bless ya Ray. If it wasn't for wifi at home and work I would be tinkering just like you.
Sent from my SPH-D710 using xda premium
skshow289 said:
I'd like to give this a shot.... Where are these settings located?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
##DATA# Edit>MSL CODE>Others.
May be elsewhere on gingerbread. Don't recall correctly but i think it might be in ##DEBUG# on gingerbread.
Sent from my SPH-D710 using XDA
where to find these settings?
BrandoKC said:
God bless ya Ray. If it wasn't for wifi at home and work I would be tinkering just like you.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Cool story bro! I have wifi at home too and full bars of 4g.. However I'm not always home or in a 4g area. So if i find time to tinker around with my phone to make it perform better i will do just that...
Sent from my SPH-D710 using XDA
sandwich11 said:
RayTrue04, looks like we reside in the same area. Would be nice to see better 3G speeds in Hartford. I used to have a crappy LG Optimus T on T-mobile, and I got 2Mbps down. Then I switched to Sprint and the E4GT expecting to see better speeds, and Sprint's "4G" can't even compete with T-mobile's 3G speeds. I do love my E4GT though.
Click to expand...
Click to collapse
Ever since the first Evo sprints speeds have become crap. And it's only getting worse with every new phone they release. Wimax is not so bad where I'm at but it don't penetrate some buildings well. I'm lucky I get 3 bars at home n my speeds top out at 10-12mbps.
Sent from my SPH-D710 using XDA
RayTrue04 said:
Cool story bro! I have wifi at home too and full bars of 4g.. However I'm not always home or in a 4g area. So if i find time to tinker around with my phone to make it perform better i will do just that...
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Was paying you a compliment, but be a ****.
Sent from my SPH-D710 using xda premium
BrandoKC said:
Was paying you a compliment, but be a ****.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Oh I'm sorry. I honestly thought you was being a smart***! I kinda felt like you were tryna say i have nothing better to do haha.. Thanks!
Sent from my SPH-D710 using XDA
RayTrue04 said:
Oh I'm sorry. I honestly thought you was being a smart***! I kinda felt like you were tryna say i have nothing better to do haha.. Thanks!
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
No worries brother.
Sent from my SPH-D710 using xda premium
I discovered this revA and rev0 speed difference the other day and actually posted on the Q&A section asking if anyone knew a way to force rev0 only. Nobody had a solution so I'm not sure if it's possible
Sent from my SPH-D710 using xda premium
z3bu said:
I discovered this revA and rev0 speed difference the other day and actually posted on the Q&A section asking if anyone knew a way to force rev0 only. Nobody had a solution so I'm not sure if it's possible
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
If u read my original post thoroughly you'll see that i mentioned switching ur HDR/1x Selection from hybrid mode to evdo mode you get the evdo0. Cdma mode = 1xRtt (2g), Evdo mode = evdo0 (3g), hybrid mode = both working together and thats when it turns to evdoA..
Sent from my SPH-D710 using XDA
Are you sure I just sent a text to myself and was able to send and receive it while on EVDO only mode.
Sent from my SPH-D710 using xda premium
daniel4653 said:
Are you sure I just sent a text to myself and was able to send and receive it while on EVDO only mode.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
+1...I can send sms and mms in EVDO mode. I actually ran 3 speedtests in EVDO mode and Hybrid mode rebooting after switching modes both times and actually had better speedtest results in Hybrid mode. Not sure if your on to anything here?
BigJPNut said:
+1...I can send sms and mms in EVDO mode. I actually ran 3 speedtests in EVDO mode and Hybrid mode rebooting after switching modes both times and actually had better speedtest results in Hybrid mode. Not sure if your on to anything here?
Click to expand...
Click to collapse
Where are the settings located? I don't see them.
I'm on Blazer ROM
AMunozXS said:
Where are the settings located? I don't see them.
I'm on Blazer ROM
Click to expand...
Click to collapse
##DATA# Edit>MSL CODE>Others.
BigJPNut said:
+1...I can send sms and mms in EVDO mode. I actually ran 3 speedtests in EVDO mode and Hybrid mode rebooting after switching modes both times and actually had better speedtest results in Hybrid mode. Not sure if your on to anything here?
Click to expand...
Click to collapse
After sending the message though I noticed that my phone would get LOS and I would have to turn on airplane mode or reboot . Odd....
Sent from my SPH-D710 using xda premium
Am I blind or something?
Sent from my SPH-D710 using xda premium
might have been said already but i was wanting to change my prl to get faster data speeds while roaming at home. 1x isnt cutting it! I was reading in another thread something about EPST.apk? maybe for different phones not sure.. Im on cm9a4 and currently use roam control to roam.
Sent from my SPH-D710 using XDA
http://forum.xda-developers.com/showthread.php?t=1267893&highlight=prl
About halfway down the search page for "prl".
Sunsparc said:
http://forum.xda-developers.com/showthread.php?t=1267893&highlight=prl
About halfway down the search page for "prl".
Click to expand...
Click to collapse
all i see is qpst from a computer and how to get your msl from phone? i want to change it using just the phone
Sent from my SPH-D710 using XDA
Good question... I never thought to ask since it is such a specialized procedure I figured that was the only way to do it. I would love to be able to switch it in and our on the fly. Lol
Sent from my SPH-D710 using xda premium
most phones you can.. but on this one i dont think so, I havent been able to figure it out.. there is no ##prl# and it isnt in the epst program either..
There is no way to change prl from just the phone, sorry.
Korey's thread in general section has step by step how to do it with qpst program.
Sent from my SPH-D710 using xda premium
CyberpodS2 said:
Good question... I never thought to ask since it is such a specialized procedure I figured that was the only way to do it. I would love to be able to switch it in and our on the fly. Lol
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I generally stick with PRL 01115, which grants 3G roaming in most areas, paired with Roam Control to force roaming if I absolutely need it.
I have flashed numerous ROMs and none have had working Wimax. I am in Everett/ Lynnwood and can't get wimax to even to last long enough to measure. I have tried a number of modems as well. EL 29, FF18, FG20 and even the newest one which was available thru the goodness updater. By the way has anyone figured out how to measure Wimax? I used to have the Evo 4g and got a great signal and the Evo would tell you if you had good or poor signal, however I have not found anything to measure 4g speed on my E4GT and without 4G I can't do the adjustments suggested in another post.
deddy777 said:
I have flashed numerous ROMs and none have had working Wimax. I am in Everett/ Lynnwood and can't get wimax to even to last long enough to measure. I have tried a number of modems as well. EL 29, FF18, FG20 and even the newest one which was available thru the goodness updater. By the way has anyone figured out how to measure Wimax? I used to have the Evo 4g and got a great signal and the Evo would tell you if you had good or poor signal, however I have not found anything to measure 4g speed on my E4GT and without 4G I can't do the adjustments suggested in another post.
Click to expand...
Click to collapse
Are you running a Ics ROM? Try a GB ROM I get best 4g on GB.
Sent from my SPH-D710 using xda app-developers app
juggalo1300 said:
Are you running a Ics ROM? Try a GB ROM I get best 4g on GB.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the heads up on that, right now I am going through the different modems to see if one of them will work. Is it possible this E4GT is a dud? Although my daughter is still on stock EL29 and she has bad Wimax as well.
I did notice that if I kept toggling the 4g and ran a speed test that I sometimes got better results - so far I am at FC14 and sometimes I get 2+ mb down with a ping under a hundred. My area of Seattle sucks, as I just tried Clearwire and am sending it back as well. Does anyone know of a good app that will measure the wimax, the one one the E4Gt doesn't work very well compared to what HTC has. Well I have been working on this for quite a while so time to crash
If you go to settings than go to 4g it shows you your connection in bars like back on gingerbread. If you want to get a more accurate reading than ##DEBUG# is your best option. It gives you your connection status in dbm. Lock code is 777468 not your msl. You'll find it in Wimax DM.
Sent from my SPH-D710 using xda app-developers app
Would be great but Wimax not coming on, so can't get to first base.
RayTrue04 said:
If you go to settings than go to 4g it shows you your connection in bars like back on gingerbread. If you want to get a more accurate reading than ##DEBUG# is your best option. It gives you your connection status in dbm. Lock code is 777468 not your msl. You'll find it in Wimax DM.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I can get in there with the lock code that you supplied - thanks so very much, however I can't modify anything because the Wimax DM says I need to turn on the Wimax and for some reason it will not turn on. Peace and thanks a lot.
RayTrue04 said:
If you go to settings than go to 4g it shows you your connection in bars like back on gingerbread. If you want to get a more accurate reading than ##DEBUG# is your best option. It gives you your connection status in dbm. Lock code is 777468 not your msl. You'll find it in Wimax DM.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I'm in Kent area and am having no issues. Take that beast into a sprint store and see what's up. Could be that it is wonky lol. Don't go to the tukwila store they have shady practices there and not to friendly.
Sent from my SPH-D710 using XDA
deddy777 said:
I can get in there with the lock code that you supplied - thanks so very much, however I can't modify anything because the Wimax DM says I need to turn on the Wimax and for some reason it will not turn on. Peace and thanks a lot.
Click to expand...
Click to collapse
In that same menu screen go to Wimax CT and click open device. After that scroll all the way down and click on both the load default and odb load default. This resets 4g back to default sprint values. Try that and then try turning on 4g and see if it works. Lil hint clicking on Wimax IP in that same screen will automatically start up 4g
Sent from my SPH-D710 using xda app-developers app
RayTrue04 said:
In that same menu screen go to Wimax CT and click open device. After that scroll all the way down and click on both the load default and odb load default. This resets 4g back to default sprint values. Try that and then try turning on 4g and see if it works. Lil hint clicking on Wimax IP in that same screen will automatically start up 4g
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Gibsonusa said:
I'm in Kent area and am having no issues. Take that beast into a sprint store and see what's up. Could be that it is wonky lol. Don't go to the tukwila store they have shady practices there and not to friendly.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Thanks to everyone who had advice for me. Took it to the store and they gave me a new refurb with working 4G, ain't Sprint the greatest, the tech told me that things burn up on the boards all the time, that I probably got the battery to hot or that the 4g part of the board just died for no particular reason (last billing cycle I did 4Gb of Wimax and 3+ Gb of 3g - that is why I stay with Sprint lol, no throttling and no warning call or text)