Related
I just tried flashing salvage mod and its gapps and it wouldn't boot either time. I also cleared all cache. Anyone know what I can do?
it is salvage mod 1.2.1.
JerenOtt said:
I just tried flashing salvage mod and its gapps and it wouldn't boot either time. I also cleared all cache. Anyone know what I can do?
Click to expand...
Click to collapse
What ROM were you on before you flashed Salvage Mod? If it was a sense rom, you need to perform a full wipe (data/factory reset, cache, dalvik cache, boot, system) prior to flashing the new rom. When you said you cleared 'all cache', do you also mean you cleared dalvik cache as well? What recovery are you currently using? I'm on salvage 1.2.1 right now, and I've never had a problem booting it. When you say it won't boot, what does it do? Does it boot loop, or does it hang at the splash screen (white htc evo 4g screen)? The more info the better. I'd basically suggest doing a full wipe though, and try again.
k2buckley said:
What ROM were you on before you flashed Salvage Mod? If it was a sense rom, you need to perform a full wipe (data/factory reset, cache, dalvik cache, boot, system) prior to flashing the new rom. When you said you cleared 'all cache', do you also mean you cleared dalvik cache as well? What recovery are you currently using? I'm on salvage 1.2.1 right now, and I've never had a problem booting it. When you say it won't boot, what does it do? Does it boot loop, or does it hang at the splash screen (white htc evo 4g screen)? The more info the better. I'd basically suggest doing a full wipe though, and try again.
Click to expand...
Click to collapse
I was on stock rooted before this. I did clear dalvik cache but I need to do a factory reset like you said. Thanks.
I tried that and it's still doing the same thing. It just sits at a lit up black screen. Any other suggestions?
JerenOtt said:
I was on stock rooted before this. I did clear dalvik cache but I need to do a factory reset like you said. Thanks.
Click to expand...
Click to collapse
No problem man. It will boot up after a doing a full wipe, most likely.
JerenOtt said:
I tried that and it's still doing the same thing. It just sits at a lit up black screen. Any other suggestions?
Click to expand...
Click to collapse
Can you boot into the bootloader? Power off your device. Simultaneously press the DOWN volume button and the power button until your device starts. After a short pause, a few lines of text should scroll across the screen and then you will see a few options. One of the options will be recovery. Anyway, at the top of the screen, you should see either S-ON or S-OFF. Hopefully, it displays S-OFF. Anyway, select recovery from the set of options and then, as k2buckley has instructed, go to the wipe menu and wipe EVERYTHING except the SD card itself. When you're done, do not reboot. Go to the flash menu and flash the rom you want to flash. Do not flash the gapps zip yet. Reboot after flashing the rom. I want to make sure you're able to boot into the homescreen. If you're successful, reboot into recovery, wipe cache & dalvik and then flash the gapps.zip. afterwards, reboot. When you're all setup, go back I to recovery and make a nandroid backup.
posting & replying via the XDA Premium app.
also, make sure you got the full ROM, not just the patch for going from 1.2 to 1.2.1. I did that
I was having similar issues, mine went into a boot loop about twice before getting hung up at the initial setup with FCs. I was coming from CM7 Nightly 41 that was acting weird with FC's, I always double wipe cache/dalvik/factory reset. I thought that I might have had a bad download so I re-downloaded, wiped and flashed. I couldn't get past the initial setup so I went back to Ultimate Droid and have been running that for the last 4 days or so with out any major problems except for the Facebook update dicking things up and one random reboot that I had today... I really want to give Salvagemod a shot though since it's Evo-centric.
still not working for me
hey guys... i been trying to boot into salvage mod for the past 2 days... i get it to install just fine i do get the salvage screen up too...
then when the rom is supposed to be loaded up i get the Android dude with emergency call and a crash u keep pressing ok then it goes away and comes back right away... i just wiped everything again and reflashed it and now i am stuck with salvage screen re looping..
any help would be appreciated
thanks
The OP's problem was solved in a second thread by following the below instructions:
Download a fresh copy of both amon RA v2.3 (PC36IMG.zip) and Salvage-Mod 1.2.1 and place both on the root of your SD card. Make sure there is no other file named PC36IMG.zip. on the root of your card. If there is, put that particular file in a folder. Now shutdown your device. Boot into the bootloader screen. The bootloader will automatically detect the PC36IMG.zip file and prompt you to install. Follow the prompts to install. Installation should take less than 10 seconds. Afterwards, reboot into your new recovery. Go to the wipe menu and wipe everything except the SD card. Do not reboot. Go to the flash menu and flash Salvage-Mod. This *should* work.
posting & replying via the XDA Premium app.
dougjamal said:
The OP's problem was solved in a second thread by following the below instructions:
Download a fresh copy of both amon RA v2.3? (PC36IMG.zip) and Salvage-Mod 1.2.1 and place both on the root of your SD card. Make sure there is no other file named PC36IMG.zip. on the root of your card. If there is, put that particular file in a folder. Now shutdown your device. Boot into the bootloader screen. The bootloader will automatically detect the PC36IMG.zip file and prompt you to install. Follow the prompts to install. Installation should take less than 10 seconds. Afterwards, reboot into your new recovery. Go to the wipe menu and wipe everything except the SD card. Do not reboot. Go to the flash menu and flash Salvage-Mod. This *should* work.
posting & replying via the XDA Premium app.
Click to expand...
Click to collapse
Glad you got him going Doug. I had asked him to use RA in a PM, and he responded that he liked clockwork and rom manager better, and wouldn't use RA, lol. I'm glad you convinced him otherwise.
Sent from my PC36100 using XDA App
lol....Happy Easter, my friend...
posting & replying via the XDA Premium app.
dougjamal said:
lol....Happy Easter, my friend...
posting & replying via the XDA Premium app.
Click to expand...
Click to collapse
Thank you Doug, happy Easter to you as well.
Sent from my PC36100 using XDA App
dougjamal said:
The OP's problem was solved in a second thread by following the below instructions:
Download a fresh copy of both amon RA v2.3 (PC36IMG.zip) and Salvage-Mod 1.2.1 and place both on the root of your SD card. Make sure there is no other file named PC36IMG.zip. on the root of your card. If there is, put that particular file in a folder. Now shutdown your device. Boot into the bootloader screen. The bootloader will automatically detect the PC36IMG.zip file and prompt you to install. Follow the prompts to install. Installation should take less than 10 seconds. Afterwards, reboot into your new recovery. Go to the wipe menu and wipe everything except the SD card. Do not reboot. Go to the flash menu and flash Salvage-Mod. This *should* work.
posting & replying via the XDA Premium app.
Click to expand...
Click to collapse
hey thanks a bunch doug... that was the issue darn clockwork..lol.. got it running so far so good
so after i got it running decided to install the gapps stuff too from recovery...and there goes my phone again back to android with emergency call only... going to try installing again without gapps...any tips let me know please..
thanks
Did you wipe cache and dalvik before flashing gapps? Also, are you sure you're using the correct version of gapps for whichever rom you're on?
Sent from my PC36100 using XDA App
k2buckley said:
Did you wipe cache and dalvik before flashing gapps? Also, are you sure you're using the correct version of gapps for whichever rom you're on?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
yup did everything... weird but i got it working now..did everything the same way as b4...its really sweet.. and really fast... thanks a bunch for the help
nxtstep said:
hey thanks a bunch doug... that was the issue darn clockwork..lol.. got it running so far so good
so after i got it running decided to install the gapps stuff too from recovery...and there goes my phone again back to android with emergency call only... going to try installing again without gapps...any tips let me know please..
thanks
Click to expand...
Click to collapse
You're very welcome, my friend. I'm glad I was able to help. Take care and have a great day....
posting & replying via the XDA Premium app.
k2buckley said:
What ROM were you on before you flashed Salvage Mod? If it was a sense rom, you need to perform a full wipe (data/factory reset, cache, dalvik cache, boot, system) prior to flashing the new rom. When you said you cleared 'all cache', do you also mean you cleared dalvik cache as well? What recovery are you currently using? I'm on salvage 1.2.1 right now, and I've never had a problem booting it. When you say it won't boot, what does it do? Does it boot loop, or does it hang at the splash screen (white htc evo 4g screen)? The more info the better. I'd basically suggest doing a full wipe though, and try again.
Click to expand...
Click to collapse
You're a genius. I was doing a data/factory reset, cache, and dalvik, but not boot and system. When i did those, it worked. Thanks!
everytime i try to boot any of the gingersense roms it freezes at the htc start up screen i do a battery pull and it does the same thing. Ive wiped evrything and it still occurs.
Same here. I think it is tied to the CWM & HBOOT versions on the device. Believe those require at least the 3.x CWM, idk for certain about the HBOOT. Mine aren't the latest, and those Roms don't boot for me either.
Sent from my ADR6300 using XDA Premium App
Pretty sure your hboot needs to be the latest (.92). Easy to update in bootloader.
Sent from my ADR6300 using XDA App
gingersense remix b4 did hang at the white htc screen for a long time when i installed it tonight i eventually got it to go past that point by re wiping everything and re installing the rom in cwm
how do you update the bootloader?
Go to www.dougpiston.com for the files, just download the zip, put it on your SD, and flash in bootloader (reboot holding power and volume down).
Sent from my ADR6300 using XDA App
I have hboot .92 along with the latest radio and CWM 3.0.0.7 as suggested for AMOLED screen and my phone still hangs at the white screen. Any ideas?
AJGO23 said:
I have hboot .92 along with the latest radio and CWM 3.0.0.7 as suggested for AMOLED screen and my phone still hangs at the white screen. Any ideas?
Click to expand...
Click to collapse
Cwm 2.5.1.2 works flawlessly for me.
WWW.dougpiston.com for that version.
AJGO23 said:
I have hboot .92 along with the latest radio and CWM 3.0.0.7 as suggested for AMOLED screen and my phone still hangs at the white screen. Any ideas?
Click to expand...
Click to collapse
Are you doing a full wipe before installing the rom? I'd recommend going into recovery and doing wipe data/factory reset, wipe cache, wipe dalvik cache, (mounts and storage) format system, format boot, format data, format cache. Then install zip from SD.
Sent from my ADR6300 using XDA App
Ok, So I wanted to change my ROM and I thought I did it right, but obviously that was not the case lol.
Pretty much I flashed the clockwork recovery, had it set to wipe the two things you want to wipe and then once it came back I installed zip from sd card, however, when I thought I was done and restarted my phone it just continuously loops back and forth back and forth.
I know there's a way to fix it since I have a micro sd reader, but how? I've got something REAL important to do tomorrow and not having my phone will be a huge mess.
d3athb4dishonor said:
Ok, So I wanted to change my ROM and I thought I did it right, but obviously that was not the case lol.
Pretty much I flashed the clockwork recovery, had it set to wipe the two things you want to wipe and then once it came back I installed zip from sd card, however, when I thought I was done and restarted my phone it just continuously loops back and forth back and forth.
I know there's a way to fix it since I have a micro sd reader, but how? I've got something REAL important to do tomorrow and not having my phone will be a huge mess.
Click to expand...
Click to collapse
What ROM were you on and what ROM are you going to?
What did you wipe?
How did you wipe?
How did you flash?
Sent from my T-Mobile G2 using XDA App
OriginalGabriel said:
What ROM were you on and what ROM are you going to?
What did you wipe?
How did you wipe?
How did you flash?
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
I was on the stock rom and I was trying use the update-cm-7.0.3-vision-signed
I used Clockwork Recovery to wipe and it already had two options checked to wipe, Pavlik cache and wipe data or whatever it says... Then I flashed into clockwork recovery and I went to install from ZIP, I went and found the rom file on my sd card and pressed install, it took a few moments and was done. I also added the googlepack using the same method right after. Then when I thought I was finished I rebooted my device and its been stuck in a loop ever since.
Appreciate you trying to help, I guess I figured it out with a good ole fashioned guess hahaa.
I went and wiped my phone and data to factory, wiped the Pavlic (which I think I'm saying wrong lol) and then I installed the ROM again and it worked this time.
d3athb4dishonor said:
I was on the stock rom and I was trying use the update-cm-7.0.3-vision-signed
I used Clockwork Recovery to wipe and it already had two options checked to wipe, Pavlik cache and wipe data or whatever it says... Then I flashed into clockwork recovery and I went to install from ZIP, I went and found the rom file on my sd card and pressed install, it took a few moments and was done. I also added the googlepack using the same method right after. Then when I thought I was finished I rebooted my device and its been stuck in a loop ever since.
Click to expand...
Click to collapse
I would recommend flashing the superwipe from this thread. there are 3 downloads, Try the standard superwipe first. and use superwipe+ if you have GPS problems.
Super wipe automaticly wipes system, data and cache partitions. Flash the ZIP in recovery as you would flash a ROM.
And it is recommended not to use ROM manager for flashing and to always to it manually in CWM.
So download superwipe, flash superwipe, flash ROM, flash GAPPS and reboot.
I would also recommend flashing cm 7.1 because its an outrageously HUGE upgrade over the one you just flashed.
Sent from my HTC Vision using XDA Premium App
Hi, thanks for reading..
I have a htc wildfire phone.
I S-Off-ed it with revolutionary, and also flashed Clockwork 3.0.0.6 on it.
Than I wiped cache (darvik also) and system , and tried to install cym 7 from [install zip from sd card]
as progress goes through, phone freezes or restarts and only green HTC logo appears on the screen, without sound and message (quietly brilliant).
It happens on all rom-s i've tried, nightly ones and cym 6.0 also.
Could you please help me to fix my phone?
Did you do a full wipe?
If you just wipe the cache partitions, the ROM will bootloop.
nejc121 said:
Did you do a full wipe?
If you just wipe the cache partitions, the ROM will bootloop.
Click to expand...
Click to collapse
He means data, dalvik cache and cache. Do those three wipes and reinstall the zip.
Sent from my HTC Wildfire using xda premium
Thanks guys for replay.
I wiped data, dalvik cache and cache.
Than reinstalled zip (cym 6.0), the progress bar went nearly complete, than it freezed, rebooted and booted into clockwork directly.
than i clicked on [reboot system now], it rebooted and is freezed on HTC green logo without animation and sound.
Can i do anything else? or can I install htc sense rom again? (note that I had a backup and when I click a restore, it does restore but still freezes in middle process and no effect is given on phone)
Most Sense ROMs will require a 2.5 recovery. (Use the .zip I attached, it'll give you a temporary recovery once you flash it).
I know that Rempuzzle doesn't require 2.5 recovery tho. Have you tried re-installing the CM7 .zip? or re-downloading and re-installing?
Yesterday, I had exactly the same problem like you. The problem was something with the recovery system. I flashed it again and since then, it works.
ok guys,
I've updated clockwork with update.zip, it appeared blue clockwork 2.5, I wiped everything and started installation over. no ROMs worked (cym 7, cym 6, and latest nightly cyms, HCDR.ROM also).
I think downgrading on 2.5 is kind of reflash too. note that when I reboot recovery it is still orange 3.0.0.6 then until I update it again with update1.zip
Still no result, please help if you have any more ideas.
Flash a complete new recovery, for example with the PC49IMG.zip method..
Clockworkmod recovery 5.0.2.0 has the blue text.
Clockworkmod recovery 2.5.0.7 which you need to flash older roms has green text.
The Orange one is clockwork 3.x.x.x which atm is your main recovery installed in the phone, the update zip gives a temporary recovery which will disappear after rebooting, I'm not quite sure where your going wrong but just try this if you have a cm7 Rom on your SD card.
Power off the phone and then boot into recovery, volume down and power to get hboot and then select recovery, (sorry for the noob instructions, I just want to make sure your doing it correctly) when the Orange clockwork loads up first select wipe data/factory reset and then wipe cache, after that scroll down to advanced and select wipe dalvik cache from in that menu, then go back and choose install from zip/choose zip find your cm7 Rom and select it after its done its thing reboot from main menu.
Cm7 should install fine from clockwork 3.x+ and then if you want to install an older rom like cm6 open Rom manager flash clockwork 2.5.0.7 (also temporary) and reboot into it then do the same wipes and flash cm6.
Sent from my HTC Wildfire using xda premium
3RMD said:
Flash a complete new recovery, for example with the PC49IMG.zip method..
Click to expand...
Click to collapse
Just saying that will probably confuse the guy even more, try explaining what PC49IMG is? Or at least give him a link to where he can find it.
Sent from my HTC Wildfire using xda premium
guys, I did PC49IMG.zip method too. I mean I wrote this file on sd card and than in fastreboot i clicked volume up (update). it has done everything.
I do cym7 installation exactly with your (nooby) instruction. thing is that when installation process goes, it is not finnishing, its freezing or rebooting phone and then not booting exept green HTC logo.
I think this is unique case in this forum. so no more ideas I guess.
http://forum.xda-developers.com/showthread.php?t=1029318
Ahh.... so you're not that much of a noob then, my apologies.
Look here at the second post, try to update clockwork to the latest 5.0.2.0 then try again.
Sent from my HTC Wildfire using xda premium
pampararaam!
finally clockwork 5.0 helped! <3
Thanks a lot
Devige said:
pampararaam!
finally clockwork 5.0 helped! <3
Thanks a lot
Click to expand...
Click to collapse
No worries mate, I'm glad it helped.
Sent from my HTC Wildfire using xda premium
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Which recovery version are you using? It might a corrupted recovery.
Try this recovery TWRP is cwm flashable:
SGH-T989_TWRP_v2.2.2.0.zip - 6.72 MB
Then TDJs super wipe and then install the stock ROM or any other ROM.
http://forum.xda-developers.com/showthread.php?t=1858435
Sent from my SGH-T989 w/AOKP JB Sept-12-12 using XDA app.
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
wwwwd83 said:
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Click to expand...
Click to collapse
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
m tr4nch said:
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
Click to expand...
Click to collapse
got it all working again.. ended up odin flashing twrp 2.2 and i was able to boot into it, wipe everything, and install the new rom stuff.
Similar problem, but cannot make zips to work - HELP NEEDED
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
thatdude02 said:
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
Click to expand...
Click to collapse
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Use Odin. There is a tutorial on how to revert to stock GB (might be ICS) in the T989 development forum. It should be a sticky in that forum.
Ditto issues.. Thank good for search function. Read.. Read.. Read..
Sent from my SGH-T989 using xda app-developers app
Tried your suggestion, but Odin won't recognize my phone
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
thatdude02 said:
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
Click to expand...
Click to collapse
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
samsung jig
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
thatdude02 said:
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
Click to expand...
Click to collapse
I've heard about the jig method as well, but have no idea on how to go about doing it. Might be worth a shot. I don't think the jig costs that much anyway. I will see if I can find anything later.
Sent from my SAMSUNG-SGH-T989 using xda premium