Develop Bugs

[Q] Having BIG problem, need help!

Okay, so earlier today I rooted my evo and flashed the CM6 ROM. A little later I tried to install Google apps.
I followed a tutorial on youtube on how to install gapps using rom manager.
Now my Evo is stuck in the Clockworkmod recovery screen and when I click reboot system now it reboots and goes back to the clockworkmod screen. I tried wiping data/factory reset and then re-installing the CM6 ROM, it did not work.
I really need some help here, I'm not too experienced and I don't want to brick my Evo. How do i fix this?? I am freaking out. Thank you!

I use AmonRA recovery personally and flash everything through recovery. I had too many problems when I tried flashing things through Rom Manager app. Do you have a nandroid backup? If so install the backup and then boot into recovery and reinstall CM6 and gapps back to back in the same recovery session. If no backup, download PC36IMG that corresponds with your hboot version and put it on the root of your sd card. Boot into bootloader by holding volume down and power at the same time. It will scan the sd card for PC36IMG and then verify it. It will then ask you if you want to update. Select yes and let it do its thing and then when it asks if you want to reboot select yes. This will put you back to stock and may unroot, so you may have to do the root procedure again. Then install CM6 and gapps in same recovery session.
Before all this try wiping cache and davlick cache and reboot. If that doesn't work try powering off phone through clockwork and then boot into bootloader. It will scan for PC36IMG and not find it then you will have options to boot into different things. Select recovery, and it will boot into Clockwork. Wipe cache and davlick cache and reboot. See if this works. If not you will have to nandroid or go back to stock probably unless someone that has had this problem and comes along to help you fix it. Always wipe cache and davlick when installing something new like gapps or kernels and full wipe when installing a new Rom, unless you are updating a Rom then just Davlick and Cache.
As long as the phone turns on it is not bricked.

housry23 said:
I use AmonRA recovery personally and flash everything through recovery. I had too many problems when I tried flashing things through Rom Manager app. Do you have a nandroid backup? If so install the backup and then boot into recovery and reinstall CM6 and gapps back to back in the same recovery session. If no backup, download PC36IMG that corresponds with your hboot version and put it on the root of your sd card. Boot into bootloader by holding volume down and power at the same time. It will scan the sd card for PC36IMG and then verify it. It will then ask you if you want to update. Select yes and let it do its thing and then when it asks if you want to reboot select yes. This will put you back to stock and may unroot, so you may have to do the root procedure again. Then install CM6 and gapps in same recovery session.
Before all this try wiping cache and davlick cache and reboot. If that doesn't work try powering off phone through clockwork and then boot into bootloader. It will scan for PC36IMG and not find it then you will have options to boot into different things. Select recovery, and it will boot into Clockwork. Wipe cache and davlick cache and reboot. See if this works. If not you will have to nandroid or go back to stock probably unless someone that has had this problem and comes along to help you fix it. Always wipe cache and davlick when installing something new like gapps or kernels and full wipe when installing a new Rom, unless you are updating a Rom then just Davlick and Cache.
As long as the phone turns on it is not bricked.
Click to expand...
Click to collapse
Where can I download the pc36img? Also, it seems that when I try to wipe dalvik cache, it doesn't do anything.

try here
http://forum.xda-developers.com/showthread.php?t=884060&highlight=unroot
If you are having issues getting the img on your SD card, if you have a card reader handy just use that to transfer it over

Tower1972 said:
try here
http://forum.xda-developers.com/showthread.php?t=884060&highlight=unroot
If you are having issues getting the img on your SD card, if you have a card reader handy just use that to transfer it over
Click to expand...
Click to collapse
I did find the correct one for my hboot version, but another question I have is do I need to flash unrevoked-forever-son.zip since I rooted using unrevoked 3.32? Or do I just put the PC36IMG on the sd card and flash it? Thanks.

Okay, I seem to have gotten it back to stock. Thank god, thought I lost my evo for a minute! Thanks to those who helped me out, its 4:45 in the morning and now I can finally go to bed! ;]

LOL glad ya got it back.. Yeah thats where I was heading before I seen your post..Its 5:46 am and Im not sure how many Evo people are actually on at this time so...anyway nite

I stayed on to help as long as I could, but had to go to work. Sorry I couldn't be here to help with more questions. Funny I was just getting up for work and you guys were just going to bed.
Glad you got it fixed for now. Remember to flash CM6 from recovery and not Rom Manager. Also, flash Gapps from recovery and not Rom Manager app. Flash CM then gapps and reboot. Make sure you do a full wipe first though. You could also look for Calkulin's tools thread in Dev section of EVO forum and find his wipe all zip. You just flash it like any other zip but it formats data, cache, boot and system partitions so that when you flash a new ROM nothing is left over from old one. Good luck my friend and happy flashing.
PS. I don't think the stock rom would give you s-on since you already had s-off, so you should be good to go. I could be wrong, but as long as you still have a custom recovery and s-off you should be good to flash any Rom.

evo camera
ok i have a root evo but my camara dosent work ... can some body help me to fx that problem

What rom are you using? Do they list camera issues or camera not working in the initial post with the rom?

Camera
Lets talk about the camera not working here:
http://forum.xda-developers.com/showthread.php?p=10983385

[Q] Salvage Mod 1.2.1 Help!!!!!

I have been trying to install salvage mod 1.2.1 for hours. I wipe dalvik, factory reset, and whipe cache every time but everytime I boot it goes to a lit up black screen without a boot animation. Has anyone else had these problems? If so how do you fix them? All help is greatly appreciated. Thanks.

Do you know what the boot animation is supposed to be?

no but it said in this update they fixed the boot animation.

JerenOtt said:
no but it said in this update they fixed the boot animation.
Click to expand...
Click to collapse
Well try again, wipe the factory/data, cache, dalvik, wipe cache & dalvik again, then flash gapps, reboot; let me know what happens.

alright ill try that

I replied in your previous thread.
posting & replying via the XDA Premium app.

this time it seems to be stuck at the white htc evo 4g screen. Its been about 5 to 10 minutes.

dougjamal said:
I replied in your previous thread.
posting & replying via the XDA Premium app.
Click to expand...
Click to collapse
I tried that earlier and I just tried it again and it didn't work. Thanks though.

teh roxxorz said:
Well try again, wipe the factory/data, cache, dalvik, wipe cache & dalvik again, then flash gapps, reboot; let me know what happens.
Click to expand...
Click to collapse
It still didn't work.

JerenOtt said:
I tried that earlier and I just tried it again and it didn't work. Thanks though.
Click to expand...
Click to collapse
Download a fresh copy of both amon RA v2.3 (PC36IMG.zip) and Salvage-Mod 1.2.1 and place both on the root of your SD card. Make sure there is no other file named PC36IMG.zip. on the root of your card. If there is, put that particular file in a folder. Now shutdown your device. Boot into the bootloader screen. The bootloader will automatically detect the PC36IMG.zip file and prompt you to install. Follow the prompts to install. Installation should take less than 10 seconds. Afterwards, reboot into your new recovery. Go to the wipe menu and wipe everything except the SD card. Do not reboot. Go to the flash menu and flash Salvage-Mod. This *should* work.
posting & replying via the XDA Premium app.

dougjamal said:
Download a fresh copy of both amon RA v2.3 (PC36IMG.zip) and Salvage-Mod 1.2.1 and place both on the root of your SD card. Make sure there is no other file named PC36IMG.zip. on the root of your card. If there is, put that particular file in a folder. Now shutdown your device. Boot into the bootloader screen. The bootloader will automatically detect the PC36IMG.zip file and prompt you to install. Follow the prompts to install. Installation should take less than 10 seconds. Afterwards, reboot into your new recovery. Go to the wipe menu and wipe everything except the SD card. Do not reboot. Go to the flash menu and flash Salvage-Mod. This *should* work.
posting & replying via the XDA Premium app.
Click to expand...
Click to collapse
thanks a lot the boot animation is going right now. I'm sure it will work.

It worked

Man, I'm stuck in a boot loop.

Ok, So I wanted to change my ROM and I thought I did it right, but obviously that was not the case lol.
Pretty much I flashed the clockwork recovery, had it set to wipe the two things you want to wipe and then once it came back I installed zip from sd card, however, when I thought I was done and restarted my phone it just continuously loops back and forth back and forth.
I know there's a way to fix it since I have a micro sd reader, but how? I've got something REAL important to do tomorrow and not having my phone will be a huge mess.

d3athb4dishonor said:
Ok, So I wanted to change my ROM and I thought I did it right, but obviously that was not the case lol.
Pretty much I flashed the clockwork recovery, had it set to wipe the two things you want to wipe and then once it came back I installed zip from sd card, however, when I thought I was done and restarted my phone it just continuously loops back and forth back and forth.
I know there's a way to fix it since I have a micro sd reader, but how? I've got something REAL important to do tomorrow and not having my phone will be a huge mess.
Click to expand...
Click to collapse
What ROM were you on and what ROM are you going to?
What did you wipe?
How did you wipe?
How did you flash?
Sent from my T-Mobile G2 using XDA App

OriginalGabriel said:
What ROM were you on and what ROM are you going to?
What did you wipe?
How did you wipe?
How did you flash?
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
I was on the stock rom and I was trying use the update-cm-7.0.3-vision-signed
I used Clockwork Recovery to wipe and it already had two options checked to wipe, Pavlik cache and wipe data or whatever it says... Then I flashed into clockwork recovery and I went to install from ZIP, I went and found the rom file on my sd card and pressed install, it took a few moments and was done. I also added the googlepack using the same method right after. Then when I thought I was finished I rebooted my device and its been stuck in a loop ever since.

Appreciate you trying to help, I guess I figured it out with a good ole fashioned guess hahaa.
I went and wiped my phone and data to factory, wiped the Pavlic (which I think I'm saying wrong lol) and then I installed the ROM again and it worked this time.

d3athb4dishonor said:
I was on the stock rom and I was trying use the update-cm-7.0.3-vision-signed
I used Clockwork Recovery to wipe and it already had two options checked to wipe, Pavlik cache and wipe data or whatever it says... Then I flashed into clockwork recovery and I went to install from ZIP, I went and found the rom file on my sd card and pressed install, it took a few moments and was done. I also added the googlepack using the same method right after. Then when I thought I was finished I rebooted my device and its been stuck in a loop ever since.
Click to expand...
Click to collapse
I would recommend flashing the superwipe from this thread. there are 3 downloads, Try the standard superwipe first. and use superwipe+ if you have GPS problems.
Super wipe automaticly wipes system, data and cache partitions. Flash the ZIP in recovery as you would flash a ROM.
And it is recommended not to use ROM manager for flashing and to always to it manually in CWM.
So download superwipe, flash superwipe, flash ROM, flash GAPPS and reboot.

I would also recommend flashing cm 7.1 because its an outrageously HUGE upgrade over the one you just flashed.
Sent from my HTC Vision using XDA Premium App

Boot Loop after ROM flash

I'm running amon ra, haus mod rev .a
i've partitioned my sd card with 32 swap, 1024 ext2, then to ext3
I've wipes all data/factory reset, then cache, dalvik cash, and data
I then have tried flashing 2 different ROM's and boot leave me stuck in a boot loop after flashing.
I'm not sure what to troubleshoot next.
Thank you in advance for your gracious help.
Chris

TurbineTester said:
I'm running amon ra, haus mod rev .a
i've partitioned my sd card with 32 swap, 1024 ext2, then to ext3
I've wipes all data/factory reset, then cache, dalvik cash, and data
I then have tried flashing 2 different ROM's and boot leave me stuck in a boot loop after flashing.
I'm not sure what to troubleshoot next.
Thank you in advance for your gracious help.
Chris
Click to expand...
Click to collapse
First off,what roms did you try flashing and Then you need to wipe everything,from data/factory reset,cache,data,android_secure,SD ext.,system,dalvik-cache,never the SD card.Now understand that sense 3.5 roms take alot of space,so the boots and such take longer and boot more times.

Diablo67 said:
First off,what roms did you try flashing and Then you need to wipe everything,from data/factory reset,cache,data,android_secure,SD ext.,system,dalvik-cache,never the SD card.Now understand that sense 3.5 roms take alot of space,so the boots and such take longer and boot more times.
Click to expand...
Click to collapse
I tried Nitrous and Express.
This is the first time i have seen instructions to wipe SD ext and system.
So here is what i did per your instructions.
I went right down the wipe list in amonra haus mod rev .a and performed the following wipe operations:
Wipe ALL userdata/factory reset
Wipe CACHE
Wipe DALVIK-CACHE
WIPE DATA
Wipe SDCARD:.android-secure
Wipe SYSTEM
Wipe SDEXT
Wipe DATA:battery stats
I did not wipe the following:
Wipe BOOT
Wipe SDCARD
Wipe DATA:rotate settings
I then flashed this ROM
http://forum.xda-developers.com/showthread.php?t=1542036
I had heard to give everything lots of time to complete, so i have let my phone sit in the boot loop and reboot about 30 consecutive times. I think that's enough time to do something different. I then took the battery out to stop the boot loop, replaced battery and powered on the phone. It continued to boot loop, and i let it sit again for another 5 or so mintues boot looping away. I pulled the battery again and powered it back on and it continued to boot loop. It reboots every 25 seconds and the only thing i see on the screen is a black background with
"htc EVO 4G"
In white letters across the middle.
I Wiped everything again and this time i also did
Wipe DATA:battery stats
I then partitioned the sdcard again, with
SWAP: 32
ext2:1024
then under the partition menu in amonra, i selected
SD:ext2 to ext3
that process complete
Then i go to the main recovery menu and select
USB-MS toggle
and copy over the ROM from my pc to the sd card. this was the only thing i copied over and the sd card is totally empty accept for the 269MB ROM zip file. (in past attempts i have copied over the ENTIRE contents of the sd card that i backed up)
I then flash the zip and wait for it to complete.
It finishes and then goes into the boot loop again. and i've let it continue to try and do anything other than what i have described above. It does not. I pull the battery and it boot loops again.
Is there something else in the partitioning process that i need to do? Do i need to format the sd card first or after?

What you really need to wipe is: boot, system, data, cache, dalvik, and sd ext [if partitiooned], and you're good to go. Wipe the boot, and then try again.

teh roxxorz said:
What you really need to wipe is: boot, system, data, cache, dalvik, and sd ext [if partitiooned], and you're good to go. Wipe the boot, and then try again.
Click to expand...
Click to collapse
Thanks for the help!
edit: I wiped everything you said and nothing else and i still get boot loops. It reboots once every 30 seconds or so and i let it keep rebooting for about 8 minutes. Then i popped the battery and let it try to boot again but i got the same boot loop.
Again, i really do appreciate the help, what should i try next?

After flashing the rom wipe cache and dalvik again before reboot if it loops more than 3 full loops pull battery and reboot to recovery wipe cache and dalvik then under.advanced menu fix permissions(uid mismatches) and the wipe cache and dalvik again and reboot when wiping before flashing wipe each option a few times in a row until they complete the wipe rather quickly that will ensure they are wiped properly. U can also try reflashing your recovery or changing recoveries to amon RA 2.3 or amon RA style supersonic recovery v3.11 depending on what recovery you are using currently
Sent from my SPH-D710 using xda premium

TurbineTester said:
Thanks for the help!
edit: I wiped everything you said and nothing else and i still get boot loops. It reboots once every 30 seconds or so and i let it keep rebooting for about 8 minutes. Then i popped the battery and let it try to boot again but i got the same boot loop.
Again, i really do appreciate the help, what should i try next?
Click to expand...
Click to collapse
Are you sure your downloads aren't corrupt somehow?
Sent from the original Swagged Out EVO via Tapatalk 2

-EViL-KoNCEPTz- said:
After flashing the rom wipe cache and dalvik again before reboot
Click to expand...
Click to collapse
Thanks for your help!
The ROM flash goes directly to a reboot so i never get the chance to wipe anything after it installs.
if it loops more than 3 full loops pull battery and reboot to recovery wipe cache and dalvik then under.advanced menu fix permissions(uid mismatches) and the wipe cache and dalvik again and reboot
Click to expand...
Click to collapse
It boot looped again I followed your instructions and i still get the same boot loops.
when wiping before flashing wipe each option a few times in a row until they complete the wipe rather quickly that will ensure they are wiped properly. U can also try reflashing your recovery or changing recoveries to amon RA 2.3 or amon RA style supersonic recovery v3.11 depending on what recovery you are using currently
Click to expand...
Click to collapse
The last time i wiped everything about 4 times in rapid succession and then let the phone sit for about 5 minutes before flashing the ROM. Still got boot loops
For the ROM in question the OD posted a specific version of amon ra recovery, Haus Mod, and said it worked. I downloaded that reovery from
http://forum.xda-developers.com/showthread.php?t=1542036
What can i try next?

swagstr said:
Are you sure your downloads aren't corrupt somehow?
Sent from the original Swagged Out EVO via Tapatalk 2
Click to expand...
Click to collapse
someone else suggested that as well. I did md5 checksums on the file i downloaded and on the file as it sat on the card, and both were identical.
This also happens when i try to flash another newer ROM that requires partitioning the sd card.
What should i try to do next?

TurbineTester said:
someone else suggested that as well. I did md5 checksums on the file i downloaded and on the file as it sat on the card, and both were identical.
This also happens when i try to flash another newer ROM that requires partitioning the sd card.
What should i try to do next?
Click to expand...
Click to collapse
Are you flashing Apps2SD with the ROM?
Sent from the original Swagged Out HTC EVO 4G via Tapatalk

swagstr said:
Are you flashing Apps2SD with the ROM?
Sent from the original Swagged Out HTC EVO 4G via Tapatalk
Click to expand...
Click to collapse
No I'm not. Do i need to?
And how would i do that?

THe thread for the ROM is was trying to flash doesn't mention anything about flashings apps2SD. Is that something that is required for all the newer ROM that require the partitioned SD card?

HTC EVO 4G reboot
After having had the same re-boot problem and reading the postings here and other forums and having tried all the solutions I still have the problem. I can only conclude that it is hardware related. Some of the HTC EVO 4G phones have this defect and there is nothing to do but get a new phone. This is a good reason not to root the phone until you have run the phone long enough to uncover any defects and have your carrier replace the phone. Living with an unreliable phone has made it personal for me. I won't buy another HTC product. What then, is the best Android/iPhone alternative currently?

lordway said:
After having had the same re-boot problem and reading the postings here and other forums and having tried all the solutions I still have the problem. I can only conclude that it is hardware related. Some of the HTC EVO 4G phones have this defect and there is nothing to do but get a new phone. This is a good reason not to root the phone until you have run the phone long enough to uncover any defects and have your carrier replace the phone. Living with an unreliable phone has made it personal for me. I won't buy another HTC product. What then, is the best Android/iPhone alternative currently?
Click to expand...
Click to collapse
All products... And I mean all products will have defects. You got the one in a million. And that sucks, it really does. But you need to realize one defective product does not mean ALL HTC phones are terrible. If I were you, I would talk to Sprint and HTC, it may be a long shot. But if this wasn't your fault, one of them should try to help you fix it.
Sent from the original Swagged Out HTC EVO 4G via Tapatalk

lordway said:
After having had the same re-boot problem and reading the postings here and other forums and having tried all the solutions I still have the problem. I can only conclude that it is hardware related. Some of the HTC EVO 4G phones have this defect and there is nothing to do but get a new phone. This is a good reason not to root the phone until you have run the phone long enough to uncover any defects and have your carrier replace the phone. Living with an unreliable phone has made it personal for me. I won't buy another HTC product. What then, is the best Android/iPhone alternative currently?
Click to expand...
Click to collapse
Same here. But i have had my evo 3D for nearly a year and have had no issues. I only decided to root because all the bloatware that gets added with every system update was killing me, then i found out u can flash ROMs and such. I have a headache from this bootloop issue as well and i was wondering, after you gain S_OFF, HBOOT returns to *** LOCKED *** and i was wondering if that had to be unlocked before flashing, but i havent heard anyone say to do this.

Flashing a ROM and getting stuck on boot is an issue with the ROM usually, flashing a ROM and getting stuck at a black screen that may or may not reboot is usually kernel base mismatch. Flashing a ROM that just plain reboots usually means something is wrong with system boot or one of the caches. Between different ROMs and or ROM bases (stock, modified stock, custom aosp) you need to perform a full system wipe before flashing new rom. I have a guide for the new evo lte but all the relevant knowledge is the same. And sorry for crashing the thread I'm very tired and I thought I was in the lte forums

[Q] TMO SGH-T989 cant wipe data, cant restore backup, cant do ANYTHING

SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.

Which recovery version are you using? It might a corrupted recovery.
Try this recovery TWRP is cwm flashable:
SGH-T989_TWRP_v2.2.2.0.zip - 6.72 MB
Then TDJs super wipe and then install the stock ROM or any other ROM.
http://forum.xda-developers.com/showthread.php?t=1858435
Sent from my SGH-T989 w/AOKP JB Sept-12-12 using XDA app.

any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.

wwwwd83 said:
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Click to expand...
Click to collapse
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium

m tr4nch said:
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
Click to expand...
Click to collapse
got it all working again.. ended up odin flashing twrp 2.2 and i was able to boot into it, wipe everything, and install the new rom stuff.

Similar problem, but cannot make zips to work - HELP NEEDED
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
thatdude02 said:
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse

kikorras said:
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
Click to expand...
Click to collapse
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium

Use Odin. There is a tutorial on how to revert to stock GB (might be ICS) in the T989 development forum. It should be a sticky in that forum.

Ditto issues.. Thank good for search function. Read.. Read.. Read..
Sent from my SGH-T989 using xda app-developers app

Tried your suggestion, but Odin won't recognize my phone
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
thatdude02 said:
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse

kikorras said:
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
Click to expand...
Click to collapse
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium

samsung jig
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
thatdude02 said:
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse

kikorras said:
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
Click to expand...
Click to collapse
I've heard about the jig method as well, but have no idea on how to go about doing it. Might be worth a shot. I don't think the jig costs that much anyway. I will see if I can find anything later.
Sent from my SAMSUNG-SGH-T989 using xda premium