Related
So I have a rooted (latest unrevoked) EVO with stock ROM. Radio is the current version so I did not need to flash a new radio. I have the rom backed up with rom manager and also a Titanium Backup.
I download Cm7-final with Rom Manager and proceed to flash it. All appears well until it loads and I'm stuck in CM7 splash bootloop and never get into the actual OS/homescreen. I boot to recovery and restore my prior rom backup, luckily all is fine.
My question is what have i done wrong? I read the EVO CM7 Wiki and it looks like I followed the instructions correctly. Do I need to ditch using RomManager and try it manually? Any suggestions on why I got this bootloop?
i had the same problem when i tried to update on the g2. i backed up the phone and wipe data and caches and flashed again the it worked you might have to do it acouple of times
Sent from my SGH-T959 using XDA App
KNguyen104 said:
i had the same problem when i tried to update on the g2. i backed up the phone and wipe data and caches and flashed again the it worked you might have to do it acouple of times
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Using the RomManager interface I chose to Wipe Data and Cache and also chose the gapps package to install. I guess I could try it again but I was mystified why it didnt work since I "thought" it was so simple.
If you're coming from a sense rom, wipe cache, data, dalvik, system, boot, basically everything but the sd card. After that, flash cyanogenmod, then gapps, then start the phone.
Sent from my hand with XDA Premium installed
snowboarda42 said:
If you're coming from a sense rom, wipe cache, data, dalvik, system, boot, basically everything but the sd card. After that, flash cyanogenmod, then gapps, then start the phone.
Sent from my hand with XDA Premium installed
Click to expand...
Click to collapse
I'm an android noob, you'll have to forgive me. I thought when I selected "wipe data and cache" prior to flashing CM7 in the RomManager interface that it meant it would wipe all of that.
So I need to manually wipe everything except the card? Also, a secondary question, will any of this jeopardize the ability to restore my currently backed up stock sense rom if **** hits the fan?
Alpine- said:
I'm an android noob, you'll have to forgive me. I thought when I selected "wipe data and cache" prior to flashing CM7 in the RomManager interface that it meant it would wipe all of that.
So I need to manually wipe everything except the card? Also, a secondary question, will any of this jeopardize the ability to restore my currently backed up stock sense rom if **** hits the fan?
Click to expand...
Click to collapse
No it won't as long as you have a nandroid. Look up the "VR Superwipe," and flash it. I'd recommend booting into recovery manually and doing this. Wipe cache and dalvik after flashing the superwipe for good measure. Finally flash the ROM.
Sent from my PC36100 using Tapatalk
Alpine- said:
So I have a rooted (latest unrevoked) EVO with stock ROM. Radio is the current version so I did not need to flash a new radio. I have the rom backed up with rom manager and also a Titanium Backup.
I download Cm7-final with Rom Manager and proceed to flash it. All appears well until it loads and I'm stuck in CM7 splash bootloop and never get into the actual OS/homescreen. I boot to recovery and restore my prior rom backup, luckily all is fine.
My question is what have i done wrong? I read the EVO CM7 Wiki and it looks like I followed the instructions correctly. Do I need to ditch using RomManager and try it manually? Any suggestions on why I got this bootloop?
Click to expand...
Click to collapse
I had the same issue....although mine have been caused by restoring system data.
What I did is manually DL the rom, boot into recover, wiped cache/dalvic, flashed from zip (Both CM7 and the proper GAPPS file) and it worked.
eventer289 said:
No it won't as long as you have a nandroid. Look up the "VR Superwipe," and flash it. I'd recommend booting into recovery manually and doing this. Wipe cache and dalvik after flashing the superwipe for good measure. Finally flash the ROM.
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
nandroid? So the RomManager rom backup I created isnt sufficient? I also have a full Titanium Backup saved too. Why Nandroid? I was under the impression this was just a similar app to Titanium - wrong?
Thanks for the input guys.
Alpine- said:
nandroid? So the RomManager rom backup I created isnt sufficient? I also have a full Titanium Backup saved too. Why Nandroid? I was under the impression this was just a similar app to Titanium - wrong?
Thanks for the input guys.
Click to expand...
Click to collapse
So wait, still getting the loops?
teh roxxorz said:
So wait, still getting the loops?
Click to expand...
Click to collapse
I have no tried since I got all these suggestions. Sorry for the confusion. I suspect manually wiping and manually installing will work.
Alpine:
When I first started flashing stuff I relied on the Clockwork app to do everything. I used it to flash roms and clear/wipe data and cache. However, after running into problems like yours I started doing it manually.
What I started doing was booting into RECOVERY (i know it sounds scary but it really isn't) A little off topic but there is a great app that I think every rooted user should use, it's called: Reboot Control Widget It only costs a measly $1 in the Market but it's well worth it. Basically you put the widget on the desktop and click on it. You are then given the option to Reboot your phone, Hot Boot (fast reboot), boot into Recovery, Bootloader or Shut Down. Best dollar you will ever spend on an app.
So anyway, l strayed from my point. The problem you are experiencing is partially due to not having fully wiped your phones data/cache. I know you think you did it through the Clockwork app but from experience it doesn't work that well. There is a "flashable" file called Calkulin's Format All. It is in the DEV section posted in Calkulin's Rom section. It will clear everything except the contents of your SD card.
1. Boot into RECOVERY
2. find: INSTALL ZIP FROM SDCARD
3. select the Calkulin's Format ALL.zip file (your phone will be totally clean after this)
4. Again, choose INSTALL ZIP FROM SDCARD
5. Select the ROM you want to flash. (If it is a Cyanogen based ROM you will have to flash the appropriate Google Apps file after flashing the ROM. If flashing a Sense ROM the Gapps file is not necessary)
6. Flash Gapps file (Google apps if necessary)
7. Once this is done select REBOOT SYSTEM NOW
I feel confident that if you follow those steps you won't run into any bootloops!
I have added the Format All.zip file that I mentioned in my last post.
Little advice:
- take the time to do a Nandroid before flashing a new rom
- use Titanium to restore only the apps w/o the data. I know it's nice to restore everything the way you had it on the last rom but from my experience this has led to instability in the new rom. Also from my experience when you are on a SENSE rom and use Titanium to backup your files and data when you install a AOSP (like CM) rom and try to restore those files and data it won't even let you. Just something to keep in mind if you are switching between CM to Sense or vice versa.
Alpine- said:
I have no tried since I got all these suggestions. Sorry for the confusion. I suspect manually wiping and manually installing will work.
Click to expand...
Click to collapse
Yes it should.
Manually wipe you factory/data, cache, dalvik, then flash the rom with the latest gapps and you'll be good.
SantinoInc said:
Alpine:
When I first started flashing stuff I relied on the Clockwork app to do everything. I used it to flash roms and clear/wipe data and cache. However, after running into problems like yours I started doing it manually.....
Click to expand...
Click to collapse
Wow, great post. Very informative and detailed, thanks a lot.
So why is creating a nandroid backup better than the ROM backup function in RomManager? I restored that rom once and it worked flawlessly. How does nandroid differ from the rom backup created in RomManager?
when you use clockwordmod recovery to wipe your phone the dalvik doesn't wipe with the wipe option you see on the main screen, i belive you will see the option to wipe it in the advanced menu
Alpine- said:
Wow, great post. Very informative and detailed, thanks a lot.
So why is creating a nandroid backup better than the ROM backup function in RomManager? I restored that rom once and it worked flawlessly. How does nandroid differ from the rom backup created in RomManager?
Click to expand...
Click to collapse
They are the same. ROM Manager boots you into recovery and nandroids for you. People have mixed experiences with ROM Manager. From my experience it is best just to boot manually into recovery and take care of all your flashing and wiping there.
Sent from my PC36100 using Tapatalk
I just tried flashing salvage mod and its gapps and it wouldn't boot either time. I also cleared all cache. Anyone know what I can do?
it is salvage mod 1.2.1.
JerenOtt said:
I just tried flashing salvage mod and its gapps and it wouldn't boot either time. I also cleared all cache. Anyone know what I can do?
Click to expand...
Click to collapse
What ROM were you on before you flashed Salvage Mod? If it was a sense rom, you need to perform a full wipe (data/factory reset, cache, dalvik cache, boot, system) prior to flashing the new rom. When you said you cleared 'all cache', do you also mean you cleared dalvik cache as well? What recovery are you currently using? I'm on salvage 1.2.1 right now, and I've never had a problem booting it. When you say it won't boot, what does it do? Does it boot loop, or does it hang at the splash screen (white htc evo 4g screen)? The more info the better. I'd basically suggest doing a full wipe though, and try again.
k2buckley said:
What ROM were you on before you flashed Salvage Mod? If it was a sense rom, you need to perform a full wipe (data/factory reset, cache, dalvik cache, boot, system) prior to flashing the new rom. When you said you cleared 'all cache', do you also mean you cleared dalvik cache as well? What recovery are you currently using? I'm on salvage 1.2.1 right now, and I've never had a problem booting it. When you say it won't boot, what does it do? Does it boot loop, or does it hang at the splash screen (white htc evo 4g screen)? The more info the better. I'd basically suggest doing a full wipe though, and try again.
Click to expand...
Click to collapse
I was on stock rooted before this. I did clear dalvik cache but I need to do a factory reset like you said. Thanks.
I tried that and it's still doing the same thing. It just sits at a lit up black screen. Any other suggestions?
JerenOtt said:
I was on stock rooted before this. I did clear dalvik cache but I need to do a factory reset like you said. Thanks.
Click to expand...
Click to collapse
No problem man. It will boot up after a doing a full wipe, most likely.
JerenOtt said:
I tried that and it's still doing the same thing. It just sits at a lit up black screen. Any other suggestions?
Click to expand...
Click to collapse
Can you boot into the bootloader? Power off your device. Simultaneously press the DOWN volume button and the power button until your device starts. After a short pause, a few lines of text should scroll across the screen and then you will see a few options. One of the options will be recovery. Anyway, at the top of the screen, you should see either S-ON or S-OFF. Hopefully, it displays S-OFF. Anyway, select recovery from the set of options and then, as k2buckley has instructed, go to the wipe menu and wipe EVERYTHING except the SD card itself. When you're done, do not reboot. Go to the flash menu and flash the rom you want to flash. Do not flash the gapps zip yet. Reboot after flashing the rom. I want to make sure you're able to boot into the homescreen. If you're successful, reboot into recovery, wipe cache & dalvik and then flash the gapps.zip. afterwards, reboot. When you're all setup, go back I to recovery and make a nandroid backup.
posting & replying via the XDA Premium app.
also, make sure you got the full ROM, not just the patch for going from 1.2 to 1.2.1. I did that
I was having similar issues, mine went into a boot loop about twice before getting hung up at the initial setup with FCs. I was coming from CM7 Nightly 41 that was acting weird with FC's, I always double wipe cache/dalvik/factory reset. I thought that I might have had a bad download so I re-downloaded, wiped and flashed. I couldn't get past the initial setup so I went back to Ultimate Droid and have been running that for the last 4 days or so with out any major problems except for the Facebook update dicking things up and one random reboot that I had today... I really want to give Salvagemod a shot though since it's Evo-centric.
still not working for me
hey guys... i been trying to boot into salvage mod for the past 2 days... i get it to install just fine i do get the salvage screen up too...
then when the rom is supposed to be loaded up i get the Android dude with emergency call and a crash u keep pressing ok then it goes away and comes back right away... i just wiped everything again and reflashed it and now i am stuck with salvage screen re looping..
any help would be appreciated
thanks
The OP's problem was solved in a second thread by following the below instructions:
Download a fresh copy of both amon RA v2.3 (PC36IMG.zip) and Salvage-Mod 1.2.1 and place both on the root of your SD card. Make sure there is no other file named PC36IMG.zip. on the root of your card. If there is, put that particular file in a folder. Now shutdown your device. Boot into the bootloader screen. The bootloader will automatically detect the PC36IMG.zip file and prompt you to install. Follow the prompts to install. Installation should take less than 10 seconds. Afterwards, reboot into your new recovery. Go to the wipe menu and wipe everything except the SD card. Do not reboot. Go to the flash menu and flash Salvage-Mod. This *should* work.
posting & replying via the XDA Premium app.
dougjamal said:
The OP's problem was solved in a second thread by following the below instructions:
Download a fresh copy of both amon RA v2.3? (PC36IMG.zip) and Salvage-Mod 1.2.1 and place both on the root of your SD card. Make sure there is no other file named PC36IMG.zip. on the root of your card. If there is, put that particular file in a folder. Now shutdown your device. Boot into the bootloader screen. The bootloader will automatically detect the PC36IMG.zip file and prompt you to install. Follow the prompts to install. Installation should take less than 10 seconds. Afterwards, reboot into your new recovery. Go to the wipe menu and wipe everything except the SD card. Do not reboot. Go to the flash menu and flash Salvage-Mod. This *should* work.
posting & replying via the XDA Premium app.
Click to expand...
Click to collapse
Glad you got him going Doug. I had asked him to use RA in a PM, and he responded that he liked clockwork and rom manager better, and wouldn't use RA, lol. I'm glad you convinced him otherwise.
Sent from my PC36100 using XDA App
lol....Happy Easter, my friend...
posting & replying via the XDA Premium app.
dougjamal said:
lol....Happy Easter, my friend...
posting & replying via the XDA Premium app.
Click to expand...
Click to collapse
Thank you Doug, happy Easter to you as well.
Sent from my PC36100 using XDA App
dougjamal said:
The OP's problem was solved in a second thread by following the below instructions:
Download a fresh copy of both amon RA v2.3 (PC36IMG.zip) and Salvage-Mod 1.2.1 and place both on the root of your SD card. Make sure there is no other file named PC36IMG.zip. on the root of your card. If there is, put that particular file in a folder. Now shutdown your device. Boot into the bootloader screen. The bootloader will automatically detect the PC36IMG.zip file and prompt you to install. Follow the prompts to install. Installation should take less than 10 seconds. Afterwards, reboot into your new recovery. Go to the wipe menu and wipe everything except the SD card. Do not reboot. Go to the flash menu and flash Salvage-Mod. This *should* work.
posting & replying via the XDA Premium app.
Click to expand...
Click to collapse
hey thanks a bunch doug... that was the issue darn clockwork..lol.. got it running so far so good
so after i got it running decided to install the gapps stuff too from recovery...and there goes my phone again back to android with emergency call only... going to try installing again without gapps...any tips let me know please..
thanks
Did you wipe cache and dalvik before flashing gapps? Also, are you sure you're using the correct version of gapps for whichever rom you're on?
Sent from my PC36100 using XDA App
k2buckley said:
Did you wipe cache and dalvik before flashing gapps? Also, are you sure you're using the correct version of gapps for whichever rom you're on?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
yup did everything... weird but i got it working now..did everything the same way as b4...its really sweet.. and really fast... thanks a bunch for the help
nxtstep said:
hey thanks a bunch doug... that was the issue darn clockwork..lol.. got it running so far so good
so after i got it running decided to install the gapps stuff too from recovery...and there goes my phone again back to android with emergency call only... going to try installing again without gapps...any tips let me know please..
thanks
Click to expand...
Click to collapse
You're very welcome, my friend. I'm glad I was able to help. Take care and have a great day....
posting & replying via the XDA Premium app.
k2buckley said:
What ROM were you on before you flashed Salvage Mod? If it was a sense rom, you need to perform a full wipe (data/factory reset, cache, dalvik cache, boot, system) prior to flashing the new rom. When you said you cleared 'all cache', do you also mean you cleared dalvik cache as well? What recovery are you currently using? I'm on salvage 1.2.1 right now, and I've never had a problem booting it. When you say it won't boot, what does it do? Does it boot loop, or does it hang at the splash screen (white htc evo 4g screen)? The more info the better. I'd basically suggest doing a full wipe though, and try again.
Click to expand...
Click to collapse
You're a genius. I was doing a data/factory reset, cache, and dalvik, but not boot and system. When i did those, it worked. Thanks!
I just managed to nearly brick my buddy's Droid X, and I just wanted to see if there was an easier way to do what I had to go through.
Going from Liberty 2.0 to DarkSlide, did a nandroid backup, wiped data, cache, dalvik, the usual... But, darkslide didn't install right for some reason, and it hung on the bootlogo. After waiting 15 minutes, I finally pulled the battery, expecting Clockwork to come up, and I could restore. Instead, I had the normal recovery, with the four options to wipe data, wipe cache, install update.zip, or reboot.
Now, besides the point that I just had to sieve through several update.zip's, including a bad md5 sum or two, running RSD Lite and loading a stock Rom and re-rooting. This was my first time ever going through all this crazy process... I'm just wondering:
If a ROM goes wrong in installing, is there a way to avoid all the insanity I just went through, or am I running the risk of going through all that every time I flash a new ROM?
Haha same here. I almost bricked my phone but o was able to restore it with the original RUU to downgrade and reset to factory settings. By doing that I just had a spare sd card to format and re-rooted. Once that was done ROM Manager did the rest with restoring my last backed up working ROM on my original sd card.
Its hard to come by one click rooting tools.
Sent from my HTC Inspire 4G
XDA Developers Premium App
homescrub said:
I almost bricked my phone but o was able to restore it with the original RUU to downgrade and reset to factory settings. By doing that I just had a spare sd card to format and re-rooted.
Click to expand...
Click to collapse
How would I go about that?
hmm If you would flash Clockwork into recovery section of you phone and not using Rom Manager to boot into update.zip (ClockWork), you woudln't have such problems
Everytime I do a update and it fails it still boots into the Bootloader and my beloved ClockWork Mod v3 with the ability to flash another CustomRom with works.
Greetins
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Which recovery version are you using? It might a corrupted recovery.
Try this recovery TWRP is cwm flashable:
SGH-T989_TWRP_v2.2.2.0.zip - 6.72 MB
Then TDJs super wipe and then install the stock ROM or any other ROM.
http://forum.xda-developers.com/showthread.php?t=1858435
Sent from my SGH-T989 w/AOKP JB Sept-12-12 using XDA app.
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
wwwwd83 said:
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Click to expand...
Click to collapse
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
m tr4nch said:
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
Click to expand...
Click to collapse
got it all working again.. ended up odin flashing twrp 2.2 and i was able to boot into it, wipe everything, and install the new rom stuff.
Similar problem, but cannot make zips to work - HELP NEEDED
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
thatdude02 said:
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
Click to expand...
Click to collapse
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Use Odin. There is a tutorial on how to revert to stock GB (might be ICS) in the T989 development forum. It should be a sticky in that forum.
Ditto issues.. Thank good for search function. Read.. Read.. Read..
Sent from my SGH-T989 using xda app-developers app
Tried your suggestion, but Odin won't recognize my phone
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
thatdude02 said:
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
Click to expand...
Click to collapse
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
samsung jig
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
thatdude02 said:
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
Click to expand...
Click to collapse
I've heard about the jig method as well, but have no idea on how to go about doing it. Might be worth a shot. I don't think the jig costs that much anyway. I will see if I can find anything later.
Sent from my SAMSUNG-SGH-T989 using xda premium
Okay, I searched before posting. Here is my steps.
I was on SKYNOTE 8.2 and wanted to go back to stock and see what At&t's update was about.
Once back to stock, I rooted my phone and have been on this setup for about 2 weeks.
I was in the original thread and saw the new 4.2.2 Collective AoCP / CM10.1 ROM.
I wanted to try it out.
Using TWRP's latest, followed all instructions and when rebooting it still has stock root ROM.
What am I doing wrong?
I thought it was TWRP so I went to an earlier ver, still no change.
I've tried 4 times now to flash this 4.2.2 Rom and nothing.
Factory Reset
Wiped Dalvik
Install Zip
Install gapps
It says to wipe cache and data again
then boot up
It boots up alright, right into my old phone.
Any input I can get is appreciated guys !!!! Thanks.
Copy the ROM to your device (some storage folder)
Boot directly to TWRP
Manually install the ROM and the appropriate GAPPS
(watch the script window and see what it says.. look for errors)
Clear caches and dalvik
reboot
LuckyColdJohnson said:
Okay, I searched before posting. Here is my steps.
I was on SKYNOTE 8.2 and wanted to go back to stock and see what At&t's update was about.
Once back to stock, I rooted my phone and have been on this setup for about 2 weeks.
I was in the original thread and saw the new 4.2.2 Collective AoCP / CM10.1 ROM.
I wanted to try it out.
Using TWRP's latest, followed all instructions and when rebooting it still has stock root ROM.
What am I doing wrong?
I thought it was TWRP so I went to an earlier ver, still no change.
I've tried 4 times now to flash this 4.2.2 Rom and nothing.
Factory Reset
Wiped Dalvik
Install Zip
Install gapps
It says to wipe cache and data again
then boot up
It boots up alright, right into my old phone.
Any input I can get is appreciated guys !!!! Thanks.
Click to expand...
Click to collapse
Try wiping cache/delvik cache, then factory reset twice, then system wipe twice, Install .zip, Install GApps, then wipe cache/delvik again(don't wipe data after .zip is installed. That's how I always do it and it works great.
I think its my recovery Twrp. I changed something.
adam_wingert said:
Try wiping cache/delvik cache, then factory reset twice, then system wipe twice, Install .zip, Install GApps, then wipe cache/delvik again(don't wipe data after .zip is installed. That's how I always do it and it works great.
Click to expand...
Click to collapse
I have tried everything. Its got to be the recovery. No matter what I do in twrp, nothing changes. It says updating partitions and stimulating actions
. It also says successful. After updating to the newest twrp it started this. I changed something. ##[email protected] went into settings and reset....nothing. What if I flashed CWM and then went back to TWRP.
LuckyColdJohnson said:
I have tried everything. Its got to be the recovery. No matter what I do in twrp, nothing changes. It says updating partitions and stimulating actions
. It also says successful. After updating to the newest twrp it started this. I changed something. ##[email protected] went into settings and reset....nothing. What if I flashed CWM and then went back to TWRP.
Click to expand...
Click to collapse
Try cf auto root to reinstall stock then reinstall twrp through odin
Sent from my GT-N7105 using xda premium
What have I done ?
Android The Greek said:
Try cf auto root to reinstall stock then reinstall twrp through odin
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
Okay guys....This has made me sick to my stomach.....I have tried all the different methods. I even soft bricked my phone today using CWM.
Kies wouldnt even fix my phone.
I had to download stock firmware and flash via Odin to get back.
Installed TWRP
Rooted
Went into recovery and wiped everything again
Installed the custom ROM
Rebooted
TWRP didnt do anything even though it says it did.
My phone boots up like normal with Att logo and works but no Custom Rom and no wipes.
What is this? Im going to try other things but wow, this is crazy.
On my SD card I have alot of stuff. I also have a folder named TWRP, it has a back up in there. I wonder if I should remove that?
IDK,,,,,Stuck with Stock root for now. Help If you can. Never had this issue before. What a day
LuckyColdJohnson said:
Okay guys....This has made me sick to my stomach.....I have tried all the different methods. I even soft bricked my phone today using CWM.
Kies wouldnt even fix my phone.
I had to download stock firmware and flash via Odin to get back.
Installed TWRP
Rooted
Went into recovery and wiped everything again
Installed the custom ROM
Rebooted
TWRP didnt do anything even though it says it did.
My phone boots up like normal with Att logo and works but no Custom Rom and no wipes.
What is this? Im going to try other things but wow, this is crazy.
On my SD card I have alot of stuff. I also have a folder named TWRP, it has a back up in there. I wonder if I should remove that?
IDK,,,,,Stuck with Stock root for now. Help If you can. Never had this issue before. What a day
Click to expand...
Click to collapse
Might as well try everything. wipe your sd card in twrp,if that doesn't work reformat through android when booted. Then copy the custom rom over and try again. Only other thing I can think to try is to check that all partitions that are needed are mounted, or try CWM instead.
Also, how did you install TWRP? Through the app? that is the best way to do it, I have had problems flashing twrp through CWM or through the computer. If you aren't already, use goomanager to install it. TWRP has instructions on their website
I figured it out!!!!!!!
Doggydude said:
Might as well try everything. wipe your sd card in twrp,if that doesn't work reformat through android when booted. Then copy the custom rom over and try again. Only other thing I can think to try is to check that all partitions that are needed are mounted, or try CWM instead.
Also, how did you install TWRP? Through the app? that is the best way to do it, I have had problems flashing twrp through CWM or through the computer. If you aren't already, use goomanager to install it. TWRP has instructions on their website
Click to expand...
Click to collapse
It was the settings in TWRP. One of the boxes was checked. Sim actions for theming. I unchecked that and was on my way. Rocking The Collective AoCP now !!!!! Yes.....Thanks to all of you for your input. I'm going back to each and will hit thanks right now! Thanks again XDA members.
Lucky
I'm glad things worked out... isn't it amazing how attached we get to our toys
Sent from my GT-N7105 using Tapatalk 2