Hi, thanks for reading..
I have a htc wildfire phone.
I S-Off-ed it with revolutionary, and also flashed Clockwork 3.0.0.6 on it.
Than I wiped cache (darvik also) and system , and tried to install cym 7 from [install zip from sd card]
as progress goes through, phone freezes or restarts and only green HTC logo appears on the screen, without sound and message (quietly brilliant).
It happens on all rom-s i've tried, nightly ones and cym 6.0 also.
Could you please help me to fix my phone?
Did you do a full wipe?
If you just wipe the cache partitions, the ROM will bootloop.
nejc121 said:
Did you do a full wipe?
If you just wipe the cache partitions, the ROM will bootloop.
Click to expand...
Click to collapse
He means data, dalvik cache and cache. Do those three wipes and reinstall the zip.
Sent from my HTC Wildfire using xda premium
Thanks guys for replay.
I wiped data, dalvik cache and cache.
Than reinstalled zip (cym 6.0), the progress bar went nearly complete, than it freezed, rebooted and booted into clockwork directly.
than i clicked on [reboot system now], it rebooted and is freezed on HTC green logo without animation and sound.
Can i do anything else? or can I install htc sense rom again? (note that I had a backup and when I click a restore, it does restore but still freezes in middle process and no effect is given on phone)
Most Sense ROMs will require a 2.5 recovery. (Use the .zip I attached, it'll give you a temporary recovery once you flash it).
I know that Rempuzzle doesn't require 2.5 recovery tho. Have you tried re-installing the CM7 .zip? or re-downloading and re-installing?
Yesterday, I had exactly the same problem like you. The problem was something with the recovery system. I flashed it again and since then, it works.
ok guys,
I've updated clockwork with update.zip, it appeared blue clockwork 2.5, I wiped everything and started installation over. no ROMs worked (cym 7, cym 6, and latest nightly cyms, HCDR.ROM also).
I think downgrading on 2.5 is kind of reflash too. note that when I reboot recovery it is still orange 3.0.0.6 then until I update it again with update1.zip
Still no result, please help if you have any more ideas.
Flash a complete new recovery, for example with the PC49IMG.zip method..
Clockworkmod recovery 5.0.2.0 has the blue text.
Clockworkmod recovery 2.5.0.7 which you need to flash older roms has green text.
The Orange one is clockwork 3.x.x.x which atm is your main recovery installed in the phone, the update zip gives a temporary recovery which will disappear after rebooting, I'm not quite sure where your going wrong but just try this if you have a cm7 Rom on your SD card.
Power off the phone and then boot into recovery, volume down and power to get hboot and then select recovery, (sorry for the noob instructions, I just want to make sure your doing it correctly) when the Orange clockwork loads up first select wipe data/factory reset and then wipe cache, after that scroll down to advanced and select wipe dalvik cache from in that menu, then go back and choose install from zip/choose zip find your cm7 Rom and select it after its done its thing reboot from main menu.
Cm7 should install fine from clockwork 3.x+ and then if you want to install an older rom like cm6 open Rom manager flash clockwork 2.5.0.7 (also temporary) and reboot into it then do the same wipes and flash cm6.
Sent from my HTC Wildfire using xda premium
3RMD said:
Flash a complete new recovery, for example with the PC49IMG.zip method..
Click to expand...
Click to collapse
Just saying that will probably confuse the guy even more, try explaining what PC49IMG is? Or at least give him a link to where he can find it.
Sent from my HTC Wildfire using xda premium
guys, I did PC49IMG.zip method too. I mean I wrote this file on sd card and than in fastreboot i clicked volume up (update). it has done everything.
I do cym7 installation exactly with your (nooby) instruction. thing is that when installation process goes, it is not finnishing, its freezing or rebooting phone and then not booting exept green HTC logo.
I think this is unique case in this forum. so no more ideas I guess.
http://forum.xda-developers.com/showthread.php?t=1029318
Ahh.... so you're not that much of a noob then, my apologies.
Look here at the second post, try to update clockwork to the latest 5.0.2.0 then try again.
Sent from my HTC Wildfire using xda premium
pampararaam!
finally clockwork 5.0 helped! <3
Thanks a lot
Devige said:
pampararaam!
finally clockwork 5.0 helped! <3
Thanks a lot
Click to expand...
Click to collapse
No worries mate, I'm glad it helped.
Sent from my HTC Wildfire using xda premium
Related
HI... i updated my phone with cyanogen 7 rc2, but after it booted up it's stuck in the animation that says cyanogen mod 7 , and the blue android sign... in comes than goes, again it comes... about 20 min stuck... what to do???
It sounds like you need to go into recovery mode and delete all your caches. If you are using ClockworkMod recovery do the following (make sure you are backed up first):
Delete all user data and info (under wipe data/ factory reset),
Wipe cache (under wipe cache partition),
Wipe Dalvik Cache (under advanced).
Then once you've done that try installing and running the ROM again.
i done that one time... for info im using AmonRA.. i cleaned all the cache and everything also... and installed again... nothing happens... fortunately i restored my nand backup and booted my phone with the OTA again... waiting for some answer.... do u think that installing stable version can fix this?
Sounds like a bad flash. I had rc2 running for a month or so with no issues. I've had times when the rom just doesn't install properly ans reflashing fixes it.
Download the zip again, if possible check md5 to make sure it's all good, make sure you have the desire/bravo GSM version, clear everything and flash just the rom and nothing else. If it boots, then go back and flash your gapps and whatever else you want.
Sent from my HTC Desire using XDA App
thx for replying.. as i was waiting for your reply, i download the cm 6 that is a stable version and checked, it has the same problem too.. i also downloaded GingerVillain 1.6 and it had the same problem too. do u think the problem might be that my phone is "s-on"? and how should i know if my phone is s-on or s-off... when i was rooting my phone with unrevoked, i checked the option that says disable security, but i'm not sure if it's disabled.... because i can't install un-signed zip packages....
any reply?
That definitely sounds odd. Its definitely not an issue with S-ON/OFF, nothing you've done here requires S-OFF to work properly.
Lets just make sure you're following all the steps.
In amonra, you've done your nandroid backup, so no need to do it again. There's no point having a non working backup
Go to wipe and wipe data/factory reset
Wipe davlik cache
Wipe sd-ext (shouldn't need to do this one as you don't have apps2sd yet, but better to be safe)
Now you flash your update.zip, then reboot and you should be fine. The only other thing I can perhaps suggest if every rom you flash sticks at boot is to perhaps try clockwork recovery instead of amonra. Apart from that we might have to wait for folks more knowledgeable than myself cause I'm all out of ideas.
thx for reply.... in meanwhile , i s-off ed my phone and it has the same problem too... i have problem with all cm and gingervillain roms.. but i don't have any problem with leedriod... one more question that maybe the problem is that i have android 2.2 installed, but gingervillain and cm use android 2.3 ... this maybe the problem.... and that's why leedroid works right, because it uses android 2.2.... i'm going to check OxyGen roms... i will post the result here...
i also faced same problem CM7 .. i tried CM6 and it went on fine..
heyyy... right after i posted the reply , i went to recovery and wiped anything, then installed gingervillain 1.6, and everything's fine now... it booted up and now im setting it up.... im going to check the cm 7 too.
i tried cm7 rc2 ... and it was fine and now im using it... here's a how to for solving the problem...:
1.S-OFF your device with AlphaRev : http://forum.xda-developers.com/showthread.php?t=805811
2.Install the AlphaRev Recovery(S-OFF Image will do it automatically).
3.Go to recovery and install the rom...
4.Boot up and it should not go to system and it should stay in loop as the problem was..
5.Now you should reboot your device into recovery... there are two ways to do this... either take the battery off and put it on, then boot to bootloader by pressing the volume down and the power key and select recovery , or the second way connect it to your computer and start adb and run this command:
adb reboot recovery
6.In AlphaRev recovery first wipe the cache partition , wipe user data, and factory reset...
7.then install the rom (either cm7 or gingervillain)...
8. boot up , and now you have the system running...
This solved my problem... reply if it didn't yours...
hooo.. it worked for me now. just kept update.zip in a new SD card and not flashed google apps..
im very happy that i solved one's problem.. ... thread marked as solved...
*UPDATE* : now i realized that we can mark it as solved.. !!! hehe.. Admin do it for us...
I rooted my phone back in December/January and installed the visionary rom on my Bell Desire Z. I've since wiped my pc hdd nad since I haven't done anything in a while relating to root, I've forgotten a lot. I have a few simple questions regarding the instructions for installing the CM7 rom.
It says to do a Nandroid backup. I'm assuming clockwork will work for a nand backup just as well right?
How do I wipe it? Use the factory reset data in settings? Will I have to reinstall clockwork recovery and titanium backup? Will I have root it again?
I'm getting the info from this thread. http://forum.xda-developers.com/showthread.php?t=956227
It also says to optionally install the google addon. What is that and where do I get it. I was also looking at baconbits with CM7 in Clockwork. Is that what enables overclocking?
A nandroid back up is created within clockwork mod, which can be accessed by going into recovery manually or through rom manager, which will be already present in many of the roms you'll flash.
One you're rooted, no need to reroot. All apps usually get reinstalled automatically.
Sent from my HTC Vision using XDA App
What about wiping it? How do I do that?
footclan said:
What about wiping it? How do I do that?
Click to expand...
Click to collapse
When you're doing an install in Clockwork, it prompts you for doing a backup (Nandroid) and also asks if you want to wipe your phone and cache.
Ok, thanks a lot. I've done a Rom install through Clockwork before, but that was awhile ago.
So I'm having problems installing it. When Clockwork asked me to wipe and backup, it would just restart on me. So I went into Clockwork and told it to reboot into recovery mode and I made a back up and wiped my data from there.
Now when I try to install a CM from sd card in Clockwork it just reboots...thats it. I updated to Clockwork 3. It says under current version it's 3, but at the top of the screen it still says 2.5. How do I fix this and install CM?
Edit...I tried clearing the download cache in clockwork and then when I tried to install rom it showed as a zip file. I added the G-app zip to the CM zip but it still rebooted.
Reedit : Installed the zips manually...got repeating android on skateboard and wiped both options in recovery mode and now it's ok. Thanks for all your help.
footclan said:
So I'm having problems installing it. When Clockwork asked me to wipe and backup, it would just restart on me. So I went into Clockwork and told it to reboot into recovery mode and I made a back up and wiped my data from there.
Now when I try to install a CM from sd card in Clockwork it just reboots...thats it. I updated to Clockwork 3. It says under current version it's 3, but at the top of the screen it still says 2.5. How do I fix this and install CM?
Edit...I tried clearing the download cache in clockwork and then when I tried to install rom it showed as a zip file. I added the G-app zip to the CM zip but it still rebooted.
Click to expand...
Click to collapse
I think you might be getting CWM and RM confused; when you boot into recovery, what color is the text, orange or green?
Sent from my HTC Vision using XDA App
I just tried flashing salvage mod and its gapps and it wouldn't boot either time. I also cleared all cache. Anyone know what I can do?
it is salvage mod 1.2.1.
JerenOtt said:
I just tried flashing salvage mod and its gapps and it wouldn't boot either time. I also cleared all cache. Anyone know what I can do?
Click to expand...
Click to collapse
What ROM were you on before you flashed Salvage Mod? If it was a sense rom, you need to perform a full wipe (data/factory reset, cache, dalvik cache, boot, system) prior to flashing the new rom. When you said you cleared 'all cache', do you also mean you cleared dalvik cache as well? What recovery are you currently using? I'm on salvage 1.2.1 right now, and I've never had a problem booting it. When you say it won't boot, what does it do? Does it boot loop, or does it hang at the splash screen (white htc evo 4g screen)? The more info the better. I'd basically suggest doing a full wipe though, and try again.
k2buckley said:
What ROM were you on before you flashed Salvage Mod? If it was a sense rom, you need to perform a full wipe (data/factory reset, cache, dalvik cache, boot, system) prior to flashing the new rom. When you said you cleared 'all cache', do you also mean you cleared dalvik cache as well? What recovery are you currently using? I'm on salvage 1.2.1 right now, and I've never had a problem booting it. When you say it won't boot, what does it do? Does it boot loop, or does it hang at the splash screen (white htc evo 4g screen)? The more info the better. I'd basically suggest doing a full wipe though, and try again.
Click to expand...
Click to collapse
I was on stock rooted before this. I did clear dalvik cache but I need to do a factory reset like you said. Thanks.
I tried that and it's still doing the same thing. It just sits at a lit up black screen. Any other suggestions?
JerenOtt said:
I was on stock rooted before this. I did clear dalvik cache but I need to do a factory reset like you said. Thanks.
Click to expand...
Click to collapse
No problem man. It will boot up after a doing a full wipe, most likely.
JerenOtt said:
I tried that and it's still doing the same thing. It just sits at a lit up black screen. Any other suggestions?
Click to expand...
Click to collapse
Can you boot into the bootloader? Power off your device. Simultaneously press the DOWN volume button and the power button until your device starts. After a short pause, a few lines of text should scroll across the screen and then you will see a few options. One of the options will be recovery. Anyway, at the top of the screen, you should see either S-ON or S-OFF. Hopefully, it displays S-OFF. Anyway, select recovery from the set of options and then, as k2buckley has instructed, go to the wipe menu and wipe EVERYTHING except the SD card itself. When you're done, do not reboot. Go to the flash menu and flash the rom you want to flash. Do not flash the gapps zip yet. Reboot after flashing the rom. I want to make sure you're able to boot into the homescreen. If you're successful, reboot into recovery, wipe cache & dalvik and then flash the gapps.zip. afterwards, reboot. When you're all setup, go back I to recovery and make a nandroid backup.
posting & replying via the XDA Premium app.
also, make sure you got the full ROM, not just the patch for going from 1.2 to 1.2.1. I did that
I was having similar issues, mine went into a boot loop about twice before getting hung up at the initial setup with FCs. I was coming from CM7 Nightly 41 that was acting weird with FC's, I always double wipe cache/dalvik/factory reset. I thought that I might have had a bad download so I re-downloaded, wiped and flashed. I couldn't get past the initial setup so I went back to Ultimate Droid and have been running that for the last 4 days or so with out any major problems except for the Facebook update dicking things up and one random reboot that I had today... I really want to give Salvagemod a shot though since it's Evo-centric.
still not working for me
hey guys... i been trying to boot into salvage mod for the past 2 days... i get it to install just fine i do get the salvage screen up too...
then when the rom is supposed to be loaded up i get the Android dude with emergency call and a crash u keep pressing ok then it goes away and comes back right away... i just wiped everything again and reflashed it and now i am stuck with salvage screen re looping..
any help would be appreciated
thanks
The OP's problem was solved in a second thread by following the below instructions:
Download a fresh copy of both amon RA v2.3 (PC36IMG.zip) and Salvage-Mod 1.2.1 and place both on the root of your SD card. Make sure there is no other file named PC36IMG.zip. on the root of your card. If there is, put that particular file in a folder. Now shutdown your device. Boot into the bootloader screen. The bootloader will automatically detect the PC36IMG.zip file and prompt you to install. Follow the prompts to install. Installation should take less than 10 seconds. Afterwards, reboot into your new recovery. Go to the wipe menu and wipe everything except the SD card. Do not reboot. Go to the flash menu and flash Salvage-Mod. This *should* work.
posting & replying via the XDA Premium app.
dougjamal said:
The OP's problem was solved in a second thread by following the below instructions:
Download a fresh copy of both amon RA v2.3? (PC36IMG.zip) and Salvage-Mod 1.2.1 and place both on the root of your SD card. Make sure there is no other file named PC36IMG.zip. on the root of your card. If there is, put that particular file in a folder. Now shutdown your device. Boot into the bootloader screen. The bootloader will automatically detect the PC36IMG.zip file and prompt you to install. Follow the prompts to install. Installation should take less than 10 seconds. Afterwards, reboot into your new recovery. Go to the wipe menu and wipe everything except the SD card. Do not reboot. Go to the flash menu and flash Salvage-Mod. This *should* work.
posting & replying via the XDA Premium app.
Click to expand...
Click to collapse
Glad you got him going Doug. I had asked him to use RA in a PM, and he responded that he liked clockwork and rom manager better, and wouldn't use RA, lol. I'm glad you convinced him otherwise.
Sent from my PC36100 using XDA App
lol....Happy Easter, my friend...
posting & replying via the XDA Premium app.
dougjamal said:
lol....Happy Easter, my friend...
posting & replying via the XDA Premium app.
Click to expand...
Click to collapse
Thank you Doug, happy Easter to you as well.
Sent from my PC36100 using XDA App
dougjamal said:
The OP's problem was solved in a second thread by following the below instructions:
Download a fresh copy of both amon RA v2.3 (PC36IMG.zip) and Salvage-Mod 1.2.1 and place both on the root of your SD card. Make sure there is no other file named PC36IMG.zip. on the root of your card. If there is, put that particular file in a folder. Now shutdown your device. Boot into the bootloader screen. The bootloader will automatically detect the PC36IMG.zip file and prompt you to install. Follow the prompts to install. Installation should take less than 10 seconds. Afterwards, reboot into your new recovery. Go to the wipe menu and wipe everything except the SD card. Do not reboot. Go to the flash menu and flash Salvage-Mod. This *should* work.
posting & replying via the XDA Premium app.
Click to expand...
Click to collapse
hey thanks a bunch doug... that was the issue darn clockwork..lol.. got it running so far so good
so after i got it running decided to install the gapps stuff too from recovery...and there goes my phone again back to android with emergency call only... going to try installing again without gapps...any tips let me know please..
thanks
Did you wipe cache and dalvik before flashing gapps? Also, are you sure you're using the correct version of gapps for whichever rom you're on?
Sent from my PC36100 using XDA App
k2buckley said:
Did you wipe cache and dalvik before flashing gapps? Also, are you sure you're using the correct version of gapps for whichever rom you're on?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
yup did everything... weird but i got it working now..did everything the same way as b4...its really sweet.. and really fast... thanks a bunch for the help
nxtstep said:
hey thanks a bunch doug... that was the issue darn clockwork..lol.. got it running so far so good
so after i got it running decided to install the gapps stuff too from recovery...and there goes my phone again back to android with emergency call only... going to try installing again without gapps...any tips let me know please..
thanks
Click to expand...
Click to collapse
You're very welcome, my friend. I'm glad I was able to help. Take care and have a great day....
posting & replying via the XDA Premium app.
k2buckley said:
What ROM were you on before you flashed Salvage Mod? If it was a sense rom, you need to perform a full wipe (data/factory reset, cache, dalvik cache, boot, system) prior to flashing the new rom. When you said you cleared 'all cache', do you also mean you cleared dalvik cache as well? What recovery are you currently using? I'm on salvage 1.2.1 right now, and I've never had a problem booting it. When you say it won't boot, what does it do? Does it boot loop, or does it hang at the splash screen (white htc evo 4g screen)? The more info the better. I'd basically suggest doing a full wipe though, and try again.
Click to expand...
Click to collapse
You're a genius. I was doing a data/factory reset, cache, and dalvik, but not boot and system. When i did those, it worked. Thanks!
I rooted the incredible using unrevoked, no problem.
Installed and ran root apps, no problem, backed up everything using titanium backup and rom manager (nandroid) and so forth, installed cw recovery 3.0.0.8.
When I install the skyraider 4 rom from rom manager, it reboots and installs, but then when it reboots again it hangs at the white htc incredible screen (and I've let it wait as long as a half an hour). I have to take out the battery to be able to reboot it.
I can boot back to recovery and then re-install and boot back to the stock rooted rom just fine. But I can't get a new rom installed and working.
I've looked at previous threads about this problem:
http://forum.xda-developers.com/showthread.php?t=1038402
http://forum.xda-developers.com/showthread.php?t=1023358
http://forum.xda-developers.com/showthread.php?t=991953
http://forum.xda-developers.com/showthread.php?t=739646
http://forum.xda-developers.com/showthread.php?t=620621
and several other threads on other sites.
The only suggestions to come out of those, other that starting over from scratch (which I've done multiple times now), were to reformat the sd card, which I've also done, and to downgrade to cm recovery 2.5.1.2. Rom manager only shows versions as old as 3.0.0.5. I have put the PB31IMG.zip file on the sd card and loaded that before to help recover but I don't see how that helps with installing a new rom.
Any other suggestions? The main reason I even need a new rom is because bluetooth doesn't work in the stock rom (known issue: http://community.htc.com/na/htc-forums/android/f/91/p/2336/8570.aspx )
It sounds like you are not wiping cache and Davlik (in advanced). The constant reboot of the white screen is a classic symptom of not performing a cache and Davlik wipe
patsfan1130 said:
It sounds like you are not wiping cache and Davlik (in advanced). The constant reboot of the white screen is a classic symptom of not performing a cache and Davlik wipe
Click to expand...
Click to collapse
appreciate your help, yeah I've been doing that everytime in rom manager. I tried it several times manually in cm recovery, too, and still the white screen.
I'll just see if verizon can exchange it, or else I'll sell it for another phone with working bluetooth.
Might try reverting to the 2.5.1.2 recovery as I've heard the 3.x.x.x ones don't wipe consistently.
Sent from my ADR6300 using XDA App
when im change roms im not use Rom manager,im just use rom manager for Backup Current Rom.I use quickboot for install a new Rom
1.open quickboot
2.choose recovery
3.wipe date/factory reset
4.drop down to yes delete all user data
5.go back to the first panel and choose advance(5 and 6 optional)
6.and then wipe Dalvik Cache
7.install zip from sd card.
8.good lock,(xdadevelopers and me are not responsable for any damage in your cell.)
Im running the skyrider 4.0 and is a wonderfull Rom,highly recommended.
when im change roms im not use Rom manager,im just use rom manager for Backup Current Rom.I use quickboot for install a new Rom
1.open quickboot
2.choose recovery
3.wipe date/factory reset
4.drop down to yes delete all user data
5.go back to the first panel and choose advance(5 and 6 optional)
6.and then wipe Dalvik Cache
7.install zip from sd card.
8.good lock,(xdadevelopers and me are not responsable for any damage in your cell.)
Im running the skyrider 4.0 and is a wonderfull Rom,highly recommended.
k_nivesout said:
Might try reverting to the 2.5.1.2 recovery as I've heard the 3.x.x.x ones don't wipe consistently.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
.
There is a flash of CWM 2.5 that temporarily lets you use that to flash the rom then when you reboot it will revert back. Try that.
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Which recovery version are you using? It might a corrupted recovery.
Try this recovery TWRP is cwm flashable:
SGH-T989_TWRP_v2.2.2.0.zip - 6.72 MB
Then TDJs super wipe and then install the stock ROM or any other ROM.
http://forum.xda-developers.com/showthread.php?t=1858435
Sent from my SGH-T989 w/AOKP JB Sept-12-12 using XDA app.
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
wwwwd83 said:
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Click to expand...
Click to collapse
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
m tr4nch said:
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
Click to expand...
Click to collapse
got it all working again.. ended up odin flashing twrp 2.2 and i was able to boot into it, wipe everything, and install the new rom stuff.
Similar problem, but cannot make zips to work - HELP NEEDED
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
thatdude02 said:
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
Click to expand...
Click to collapse
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Use Odin. There is a tutorial on how to revert to stock GB (might be ICS) in the T989 development forum. It should be a sticky in that forum.
Ditto issues.. Thank good for search function. Read.. Read.. Read..
Sent from my SGH-T989 using xda app-developers app
Tried your suggestion, but Odin won't recognize my phone
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
thatdude02 said:
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
Click to expand...
Click to collapse
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
samsung jig
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
thatdude02 said:
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
Click to expand...
Click to collapse
I've heard about the jig method as well, but have no idea on how to go about doing it. Might be worth a shot. I don't think the jig costs that much anyway. I will see if I can find anything later.
Sent from my SAMSUNG-SGH-T989 using xda premium