Develop Bugs

Is the Pri Update still causeing roaming issues?

i just updated my Pri. but i have yet to run into this and a may be doing a bit of driving soon should i be worried?

If it happens, just call Sprint from a landline, and they'll do some reconfiguring on their end, and have you do a factory data wipe. Just make sure to back everything up first!

I just updated mine last night and now im unable to data or voice roam on the cm6 forced roam setting. I think I'm going to revert back to the old one as soon as I have time to figure out how to do it.

drmacinyasha said:
If it happens, just call Sprint from a landline, and they'll do some reconfiguring on their end, and have you do a factory data wipe. Just make sure to back everything up first!
Click to expand...
Click to collapse
I did a factory wipe and it didn't work. Did you call sprint while running cm6?

mattickus2 said:
I just updated mine last night and now im unable to data or voice roam on the cm6 forced roam setting. I think I'm going to revert back to the old one as soon as I have time to figure out how to do it.
Click to expand...
Click to collapse
krazyflipj said:
I did a factory wipe and it didn't work. Did you call sprint while running cm6?
Click to expand...
Click to collapse
Yes, just call Sprint (both of you). Tell them that your PRI just upgraded from 1.34 to 1.40, and now whenever you roam, your data doesn't go through, and when you make calls, you just get a message from Verizon saying they can't authorize your phone. The guy didn't ask me anything else.

Settings/system updates/profile update, then a reboot fixed it for me.

Thanks, I'll flash back to fresh and try that.
Edit: I also called sprint and it fixed my issue. I had to setup google voice as my voicemail again though.

So after I called sprint I can go on internet while roaming but I can't make or receive phone calls. I updated profiles and that didn't do anything. I will try and give sprint a call again
*UPDATE* I called Sprint again and they fixed the issue for me
Sent from my PC36100 using XDA App

did you do it thru cm6 or did you flash back to stock rooted rom when you called sprint

deviouskater said:
did you do it thru cm6 or did you flash back to stock rooted rom when you called sprint
Click to expand...
Click to collapse
I flashed back to latest fresh rom
Sent from my CM6 powered device

i called they didnt know what to do will call back later

deviouskater said:
i called they didnt know what to do will call back later
Click to expand...
Click to collapse
I went thru a total of 3 sprint cs ppl before they were able to fix.
Sent from my CM6 powered device

The moron rep I got says roaming is not available in my area. WTF.

[Q] Can Someone Please Help, I am willing to donate

I have an Evo on Boost now for 2 months rooted with no problems at all. I change roms all the time, update kernels, put themes and never any problems. Yesterday there was a post to update the pri to version 1.40.
I did it and it said something about resetting the phone. It shut down and ever since then I have no 3g at all. The only way I can surf the net or go to the market place is through my wireless internet in my home. I can send/receive texts/mms/phone calls but no internet.
Also, it constantly come up with an error 67 data call failed.
Thanks guys in advance

You could try updating profile under settings and system update.. let me know if this worked.. my 3g wasnt working went to sprint and did the update and is back on..
sent from my Evo

##3282#
edit mode
enter msl code
data profile
menu
restore
this will reset ALL data profile information on your phone. it will then reboot and reload all said information by re-provisioning your phone.
if you do not know your msl, call sprint tech support and ask nicely for it. they will usually give it to you. if not, hang up and call back. or just tell them you have no data and want to re-provision your phone and they will walk you through what i just did.
as a side note, sometimes this error pops up, for no good reason and goes away after a while. my guess is in your situation this isn't the case. you had a hiccup that's easily fixed.

carguy4471 said:
##3282#
edit mode
enter msl code
data profile
menu
restore
this will reset ALL data profile information on your phone. it will then reboot and reload all said information by re-provisioning your phone.
if you do not know your msl, call sprint tech support and ask nicely for it. they will usually give it to you. if not, hang up and call back. or just tell them you have no data and want to re-provision your phone and they will walk you through what i just did.
as a side note, sometimes this error pops up, for no good reason and goes away after a while. my guess is in your situation this isn't the case. you had a hiccup that's easily fixed.
Click to expand...
Click to collapse
Thank you for trying to help I really do appreciate it, but I don't have a sprint account I am on Boost Mobile and have been for 2 months now without any issues but this one

Could be a PRL problem? I don't know anything about getting an EVO on Boost, but I assume part of the process was downloading a PRL for Boost to connect to their towers?
Go back to the guide you followed and redo the steps.

joey72 said:
Thank you for trying to help I really do appreciate it, but I don't have a sprint account I am on Boost Mobile and have been for 2 months now without any issues but this one
Click to expand...
Click to collapse
this will still work on your phone. contact boost to get your msl. or use CDMA workshop. there is a thread in the dev section on using CDMA workshop.

carguy4471 said:
this will still work on your phone. contact boost to get your msl. or use CDMA workshop. there is a thread in the dev section on using CDMA workshop.
Click to expand...
Click to collapse
What exactly will work on my phone?? and what should I do in CDMA Workshop? I have the program and I do know my MSL, so if you can explain what I should do to get back my data connection that would be great!
I tried to update the PRI and wiped my data profile for boost mobile and now without wifi on, I get error 67 data call failed
By the way, Thank you for trying to help, you guys are the best

No offense, but it really should not be that difficult if you set this up before!! I assume that you in fact did not set your EVO up on Boost, but gave it to someone else to set up, correct?
Simply refer to the original guide, or steps you took yourself to set the phone up on Boost in the first place - or give it back to the person that did it and let them fix it.

nukedukem said:
No offense, but it really should not be that difficult if you set this up before!! I assume that you in fact did not set your EVO up on Boost, but gave it to someone else to set up, correct?
Simply refer to the original guide, or steps you took yourself to set the phone up on Boost in the first place - or give it back to the person that did it and let them fix it.
Click to expand...
Click to collapse
Hey Nukedukem,
No offense taken, however you might want to check your panties to see if you're getting your period. I thought this was a forum for people to help other people "do it themselves". If I, and everyone else did what you suggested, you'd be outside sitting on the curb with nothing to do. So if you have nothing nice to suggest, then I suggest you pass over my post and go "not help" someone else. Thanks
To everyone else: yes the guy that first did my phone is no longer to be found so if you have any suggestions I would greatly appreciate them. Also, if a programmer can help I'm more than willing to donate.
Thanks again guys

The error 67 I think may be caused by the network rejecting your phones credentials, I had this same problem last night. The only way I could fix it was to restore a nandroid backup and then have it update my profile and PRL. You may be able to get away with just restoring the backup though, trying to update anything is most likely not a good idea since you are using a network other then what the software was written for.

joey72 said:
Hey Nukedukem,
No offense taken, however you might want to check your panties to see if you're getting your period.
Click to expand...
Click to collapse
Sorry you took offense, but you are in WAY over your head. If you want help from a developer, you need to SEARCH FIRST.
WWW.GOOGLE.COM
Since I'm such a nice guy, I searched for you...30 seconds later I learned how to port my EVO to Boost Mobile.
http://cellphoneforums.net/boost-mobile/t307946-how-get-sprint-phones-boostmobile-cdma.html
Oh, and uh...try not to choke on my menorrhagia.

That method did work MONTHS ago but not now that SPRINT changed up their website your not allowed to do esn swaps anymore. I was able to do it months ago with my touch pro2 and i have an EVO now and just tried to reprogram my phone cause i had the msl code and input my boost number and msid like i did before with the touch pro2. It reseted but when i went to make a call it said account cannot be validated so had to get sprint service again. Soon as someone comes out with a VALID way of getting the EVO working on boost Im going back to them.

Tech360 said:
That method did work MONTHS ago but not now that SPRINT changed up their website your not allowed to do esn swaps anymore. I was able to do it months ago with my touch pro2 and i have an EVO now and just tried to reprogram my phone cause i had the msl code and input my boost number and msid like i did before with the touch pro2. It reseted but when i went to make a call it said account cannot be validated so had to get sprint service again. Soon as someone comes out with a VALID way of getting the EVO working on boost Im going back to them.
Click to expand...
Click to collapse
did u fix the problem?

it's because you have a sprint 1.4 pri and need a modified boost pri...until that is changed, no 3g for you, but seriously, there is an app that gives you your MSL code

[Q] Error 1012 no matter what Sprint or I do

For the past week and 1/2 i get error 1012 if i do a profile or prl update. I play with my radios in different area to test. So i always follow up with a profile update. So then i have to call sprint, have them refresh my phone and then it works for a short period of time. If i do a profile restore it never activates and have to call sprint.
Running synergy rc1 hw 0002
Lastest radios were flashed in fastboot and have worked before.
When i called sprint they gave me a credit if i was to go to the store and it be free of charge and id get a new phone. But i dont want to end up with 2.3 and loose root.
Also she said it no longer matter if your phone is rooted. You can bring it for service.
Sent from my hTc Evo!

Joey SR said:
For the past week and 1/2 i get error 1012 if i do a profile or prl update. I play with my radios in different area to test. So i always follow up with a profile update. So then i have to call sprint, have them refresh my phone and then it works for a short period of time. If i do a profile restore it never activates and have to call sprint.
Running synergy rc1 hw 0002
Lastest radios were flashed in fastboot and have worked before.
When i called sprint they gave me a credit if i was to go to the store and it be free of charge and id get a new phone. But i dont want to end up with 2.3 and loose root.
Also she said it no longer matter if your phone is rooted. You can bring it for service.
Sent from my hTc Evo!
Click to expand...
Click to collapse
The being rooted and not matter I can say is true.
Sorry I can't help with the rest.
Sent from my PC36100 using Tapatalk

I also had trouble updating my PRL today, running Synergy RC1. First time I've ever had problems updating the PRL.

ncfastls1 said:
I also had trouble updating my PRL today, running Synergy RC1. First time I've ever had problems updating the PRL.
Click to expand...
Click to collapse
Did you use clockwork mod? This guy had a similar prob.

I am having this issue as well, I posted in the forum in that link.
This is odd. We can make calls on the phone, internet, text, can not update PRL, profile and it will not receive picture texts. I messed up and DID NOT make a backup of the stock ROM, as I put a new 16g SD card in it. So I dont know if I can go back to the Stock rom or not and try it all again.
I really dont want to go to Sprint and then be given a new 2.3.3 phone.
Thanks to all that have any ideas.
I have another EVO and did the same thing to it, and it works perfectly.

I had this problem, too. The only thing that fixed it for me was a full wipe using ##786#. You will need the MSL code to do this. If you don't have it and you are rooted, you can get MSL reader from the market. If you are not rooted, then you need to call Sprint and sweet talk them into giving it to you. Back up all your apps/user date with Titanium (or whatever you use) before attempting this because it WILL wipe everything from your phone.

i use amon recovery. wiped my whole phone and reinstalled the rom, even flashed others with no go. Downgraded radio = nothing, upgraded again = nothing

I have had lots of problems getting my Data to work on my EVO running on the Boost Mobile Network(A.K.A. Sprint). Still continue not to have Data on it. I assumed it was PRL Version, but was incorrect. Well, I would get the same Error Code. I managed to update PRL manually using the link below.
http://forum.xda-developers.com/showthread.php?t=898628
Still NO DATA on my HTC EVO 4G!
Still get calls & text messages, but no internet!

I got a refurb phone a couple days ago, and they were having provisioning problems then when trying to update it at store. Perhaps it's still occurring?

UPDATE:
I took it to the store yesterday. When I went to go pick it up i noticed a scuff mark on the bottom left along with the screen lifting. Went back today to get my refurb only for this one have the whole bottom lift and fiber in the rear camera and the lense. Back to the store I go and hopefully I get a new one.

UPDATE: given another refurb. This one is perfect, no issues. no more errors. also its hardware version 0002. Weird. The other was 0004. So about $37 at the store. when i called sprint I received a $50 credit along with the $37 I spent on the phone. New phone plus credit = a happy customer.

1012 error
rugedraw said:
I had this problem, too. The only thing that fixed it for me was a full wipe using ##786#. You will need the MSL code to do this. If you don't have it and you are rooted, you can get MSL reader from the market. If you are not rooted, then you need to call Sprint and sweet talk them into giving it to you. Back up all your apps/user date with Titanium (or whatever you use) before attempting this because it WILL wipe everything from your phone.
Click to expand...
Click to collapse
I have been working on my HTC EVO phone for several days trying to get my number transferred and the phone activated. I have done a factory reset called customer service, tried rooting it, everything. I got the MSL code from the previous service providers, luckily, and reset the meid imsi and everything. Finally I came across this post and it was a life saver. You providing the ##786# was what i needed to totally clear everything. It is finally activated. Thank you so much it worked!!

jjshleprock said:
The being rooted and not matter I can say is true.
Sorry I can't help with the rest.
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Mám problém s "Neplatná karta SIM " píše mi to služby 4G nejsou k dispozici protože SIM/UICC je neplatné.Kontaktujte služby zákazníkům.
Nerozumím tomu porad Tě mi,prosím.

Not Receiving Calls or Texts

Hello all,
Recently, I flashed Calkulin's E4GT 2 rom from his E4GT 3.0 one, and things had been working well for a day until it began to randomly crash and stopped notifying me/receiving any missed called/texts. I flashed back to 3.0, saw the same issues reoccur (calls/texts not coming through); reflashed 3.0 and wiped everything and still to no avail.
Data works perfectly, and I am able to send texts as well as call.
Any advice on what to do?

Try this go to settings, about phone, system updates then update profile and PRL then reboot phone and see if that helps.

call sprint (*2), tell them you want to do a DATA REFRESH, works everytime, just make sure you have your ESN ready.

tylerjames09 said:
call sprint (*2), tell them you want to do a DATA REFRESH, works everytime, just make sure you have your ESN ready.
Click to expand...
Click to collapse
Doesnt what I told em to do, do the same thing?

rbtrucking said:
Try this go to settings, about phone, system updates then update profile and PRL then reboot phone and see if that helps.
Click to expand...
Click to collapse
Thanks; tried this earlier and it didn't seem as if it works, but I pulled the battery out for 10-30 seconds and things seem to have returned to normal...somewhat.
tylerjames09 said:
call sprint (*2), tell them you want to do a DATA REFRESH, works everytime, just make sure you have your ESN ready.
Click to expand...
Click to collapse
I'll do this if things seems to falter again; thanks a lot! ill they inquire about whether I've rooted or not?

rbtrucking said:
Doesnt what I told em to do, do the same thing?
Click to expand...
Click to collapse
sort of, when people come into my store with this issue i usually do an update of the profile but if that doesn't fix it, i do a data refresh....update profile is like a "soft reset" and data refresh is like a "hard reset", both essentially do the same thing just one is more extreme and complete reprograms the phone.

Okay, so I called Spring and asked them to do a data refresh and also updated the PRL and Profile but to no avail.
Any other ideas? Or should I just unroot and go to Sprint and see if they'll be able to help me?

mattneedshelp said:
Thanks; tried this earlier and it didn't seem as if it works, but I pulled the battery out for 10-30 seconds and things seem to have returned to normal...somewhat.
I'll do this if things seems to falter again; thanks a lot! ill they inquire about whether I've rooted or not?
Click to expand...
Click to collapse
they wont ask about rooting or anything like that...it wouldnt make a difference anyway because rooting shouldnt have an affect on your programming codes.

tylerjames09 said:
they wont ask about rooting or anything like that...it wouldnt make a difference anyway because rooting shouldnt have an affect on your programming codes.
Click to expand...
Click to collapse
I would definitely return it back to stock before bringing it into sprint. I had a problem with my phone a couple months back and had to bring it in. First thing they did was check to see if it was rooted.

rbtrucking said:
I would definitely return it back to stock before bringing it into sprint. I had a problem with my phone a couple months back and had to bring it in. First thing they did was check to see if it was rooted.
Click to expand...
Click to collapse
yeah def. don't bring the phone into a sprint store with it rooted haha. I've had a couple of those come in and we turn them right out the door because the phone was tampered with and it wont be fixed.
good point rbtrucking

tylerjames09 said:
yeah def. don't bring the phone into a sprint store with it rooted haha. I've had a couple of those come in and we turn them right out the door because the phone was tampered with and it wont be fixed.
good point rbtrucking
Click to expand...
Click to collapse
Lol I am pretty sure the guy that looked at my phone knew i had rooted it before though because when I odin'd back to stock I did the full wipe and he kept asking me why is there nothing on this phone and lookin at me with a grin I just told em it was acting funny so I thought maybe a factory data reset would fix it.

rbtrucking said:
Lol I am pretty sure the guy that looked at my phone knew i had rooted it before though because when I odin'd back to stock I did the full wipe and he kept asking me why is there nothing on this phone and lookin at me with a grin I just told em it was acting funny so I thought maybe a factory data reset would fix it.
Click to expand...
Click to collapse
yeah but on a side note...sprint can truly work on rooted phones, even with custom ROMS. It is just up the store if they want to or not. So next time you take it in and they say they cant work on rooted phones, its law that they have to...(unless your ROM is the reason for the issue) ha

Results
Thanks to everyone for their help; ended up going to the store today and they ran a diagnostics test and reset everything. They said they had some towers down as well, so that may have added onto the problems.
Once again, thanks to all!

[Q] Can only make calls in Roaming mode

So I have been using ICS starting with FD05 upgraded to FD10 and started having issues a few days after i upgraded... until today I cant make any calls but only in roaming mode... downgraded to EL29 and even went completely stock with no root to see if I could get a system update or anything.. and no luck.. sometimes it will let me update prl and profile.. but other times it errors out...also for a second it seemed if I turned off 3g service my calls work connect to sprint service.. but I couldn't simulate that so called fix again..
my plr is 60686 near the Seattle area if that makes any diff...
missed a call from work and almost lost my job because of this... any help would be great...
I seen some new post about prl... but nothing really what I am experiencing..

Jeepguyxj said:
So I have been using ICS starting with FD05 upgraded to FD10 and started having issues a few days after i upgraded... until today I cant make any calls but only in roaming mode... downgraded to EL29 and even went completely stock with no root to see if I could get a system update or anything.. and no luck.. sometimes it will let me update prl and profile.. but other times it errors out...also for a second it seemed if I turned off 3g service my calls work connect to sprint service.. but I couldn't simulate that so called fix again..
my plr is 60686 near the Seattle area if that makes any diff...
missed a call from work and almost lost my job because of this... any help would be great...
I seen some new post about prl... but nothing really what I am experiencing..
Click to expand...
Click to collapse
Your post was a little hard to follow. You have used the one-click odin to go back to a stock rooted rom and are still having problems, is that correct?

Try this
##72786# then enter your MSL code then click okay to reset data. This will only reset and re-provision/activate your phone to Sprint. This will create a new profile on Sprints network and will give you any new network settings that may have changed in your area
1. Download "Terminal Emulator" from the app market.2. Open Terminal Emulator.3. type in getprop ril.MSL (make sure the .MSL is capitalized)4. Press enter and poof, you have your MSL code.
Helps to not use swype .....while doing this as Swype will capitalize the i in ril
Sent from my SPH-D710 using Tapatalk 2 Beta-6

Epix4G said:
Try this
##72786# then enter your MSL code then click okay to reset data. This will only reset and re-provision/activate your phone to Sprint. This will create a new profile on Sprints network and will give you any new network settings that may have changed in your area
1. Download "Terminal Emulator" from the app market.2. Open Terminal Emulator.3. type in getprop ril.MSL (make sure the .MSL is capitalized)4. Press enter and poof, you have your MSL code.
Helps to not use swype .....while doing this as Swype will capitalize the i in ril
Click to expand...
Click to collapse
Great info. Will this have any other affect other than reprovisioning the phone?

tdunham said:
Great info. Will this have any other affect other than reprovisioning the phone?
Click to expand...
Click to collapse
Not that i know of .... Then do a prl and profile update....
Sent from my SPH-D710 using Tapatalk 2 Beta-6

Epix4G said:
Try this
##72786# then enter your MSL code then click okay to reset data. This will only reset and re-provision/activate your phone to Sprint. This will create a new profile on Sprints network and will give you any new network settings that may have changed in your area
1. Download "Terminal Emulator" from the app market.2. Open Terminal Emulator.3. type in getprop ril.MSL (make sure the .MSL is capitalized)4. Press enter and poof, you have your MSL code.
Helps to not use swype .....while doing this as Swype will capitalize the i in ril
Sent from my SPH-D710 using Tapatalk 2 Beta-6
Click to expand...
Click to collapse
Dang Was hopeful that this was going to work... Did everything you said and I still cant make sprint network calls only roaming... tho now it updated prl and profile very fast.. just wont let me make phone calls...

Jeepguyxj said:
Dang Was hopeful that this was going to work... Did everything you said and I still cant make sprint network calls only roaming... tho now it updated prl and profile very fast.. just wont let me make phone calls...
Click to expand...
Click to collapse
Next is to use Odin to flash modem and then see if it still don't work
Sent from my SPH-D710 using Tapatalk 2 Beta-6

Epix4G said:
Next is to use Odin to flash modem and then see if it still don't work
Sent from my SPH-D710 using Tapatalk 2 Beta-6
Click to expand...
Click to collapse
Ive already flashed a EL29 modem and still no luck
Im on EL29 GB complete stock no root or anything... should I reflash the same modem (EL29) or go with like EL26?
also I chatted with sprint today and they said there is an outage in my area and it started today at 12:00... even tho my issue started yesterday at 4pm ish... looks like im going to have to wait to see if they fix it on there side before I can say there is something wrong on my end... THANKS SPRINT!!!

Jeepguyxj said:
Dang Was hopeful that this was going to work... Did everything you said and I still cant make sprint network calls only roaming... tho now it updated prl and profile very fast.. just wont let me make phone calls...
Click to expand...
Click to collapse
You didn't associate your phone with google voice at any point did you? Caused me a ton of problems.
Sent from my SPH-D710 using XDA

tdunham said:
Your post was a little hard to follow. You have used the one-click odin to go back to a stock rooted rom and are still having problems, is that correct?
Click to expand...
Click to collapse
So basically... Last week i was running ICS FD05 for a few days and then upgrade fresh install to FD10 ICS... Monday this week I missed a phone call around 5AM for my work.. didn't think about it much...
but yesterday I was having issues with getting text and sending them... with double sending and just not sending at all.. so I figured maybe its the new leak that messed up so I went back to stock rooted EL29 with one click (done it before several times) but went I went back it seemed that I cant make phone calls to my Voicemail or anyone else for that matter unless I was roaming...
I have tried flashing back to an ICS build and that hasn't helped... also I reinstalled a 60686 prl from a post in development (thought that my prl was corrupt) and also did a factory reset with my MSL number like Epix4g told me to do.
and No never used google voice at all.. was thinking about it after this fiasco... but staying away till i get a better picture of whats going on

Jeepguyxj said:
No never used google voice at all.. was thinking about it after this fiasco... but staying away till i get a better picture of whats going on
Click to expand...
Click to collapse
FYI, I can relate with you. For the last several weeks I can't recieve phone calls or voicemails. The problem has been intermittent. Calls drop straight to voicemail and I'll get the visual voicemail notification hours later.
I can't blame this one on ICS, I've been using GB roms and it's happened on several (worth a try). But I swear it started happening after I thought I'd give Gvoice a try. Getting rid of it is a different conversation. I've been back and forth with Sprint a few times too. Just got off of the phone a few minutes ago because it happened again today.
Keep me apprised too.

I don't have any problem with gv but I don't inter grate it with sprint I just use the voice mail part ....when u first install just click skip and then go from there .... I hated it making u hit 1 to answer and the look of the text part ....it is OK for just voicemail though to me
Sent from my SPH-D710 using Tapatalk 2 Beta-6

Going about 30miles away from my house to see if it has anything to do with the cell tower.. wish me luck..

Jeepguyxj said:
Going about 30miles away from my house to see if it has anything to do with the cell tower.. wish me luck..
Click to expand...
Click to collapse
LOL, bring back some hot wings please.
Sent from my SPH-D710 using XDA

tdunham said:
LOL, bring back some hot wings please.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Well I get great service anywhere else other than my house... I do think that my prl was corrupt.. but im going to flash the new FD16 ICS and call it good....
and tdunham... all I have is a half ate bag of funyuns... sorry no wings for you!...lol
so im going to give sprint a few days to fix their tower before I give them hell for bad service... thanks for your help all

Update to my problem
So if anyone cares I still don't have a native signal from sprint in my house.. they say that are still working on it and cant find the problem... so sprint tech support sent me an Airave ... hooked it up today... I get full bars now and pretty clear signal (just don't stand in front of it) and best of all no fee and no monthly charges unless you have an issue with credit then they charge you 5 bucks a month
the only things that suck with this is that when you make or get a call it has 3 beeps (letting you know that you are on the Airave signal)
also if you are roaming you get the same 3 beeps but you have a triangle above your signal bars
but non the less no more dropped calls from my house and has built in GPS
So if you have a weak signal or or none at all this might be right up your ally.
It seems that you get your signal from your high speed internet so make sure you have that before getting an Airave... thanks for all your help!