Related
Here's the issue for me. My computer is not recognizing my properly, or it could be the only way around. The phone only charges, and is never picked up as a usb disk drive. I have confirmed that it's a problem with my phone itself, as my friend's EVO 4G, hooked up to my computer using the same cable, connects and is recognized as a disk drive just fine. We tried swapping out microSD cards to see if it could be something with that, and his phone was still picked up fine with my microSD in it. I think my phone may be partially rooted.
I tried SimpleRoot 1.47.651.1 on my phone at my friend's house a few days ago (4-click method), and for some reason, it never completed. His computer would pick up my phone as a disk drive perfectly fine, but on the last step (reboot and scan) it would never finish, even after letting it sit for a few hours; step 3 was saying something about not being able to identify the correct cache from the browser or something like that. I'm thinking that the partial root may've flubbed up the phone?
Right now, I'm trying to look up which root method my friend tried to work on my phone. It involved PC36IMG.zip and an update named s-u-*something*. I'm still new to the EVO, not like the Droid. Anyway, that root method failed for some reason (no errors in HBOOT, but never asked if I wanted to reboot). I've tried to factory reset, and nothing. I got my phone sitting here while I'm scratching my head trying to figure out what to do. I'm well-versed in ADB, but if my computer can't pick up my phone properly, it's all for naught. Anyone have any ideas to get me on the right foot? I can still pop out the microSD and put it into the computer directly, too. Sorry for the tl;dr candidate.
Quick update/bump.
I upgraded my phone to OTA Froyo, and now USB debugging shows up, but I don't get the "Connect to PC" menu still. Is this phone fubared?
HTC Sync not recognizing phone
I was having the same problem with 2 Evos. The phone would accept a charge from the USB port and the computer would even install the driver sometimes. Then nothing. I tried again last night after I pulled the 2.2 update and it worked! I think HTC might not have had Windows 7 Starter edition covered until this update.
Here's the thing, I'm on Windows 7 Ultimate x64. I'm having this problem on 2 EVOs, also. I've updated them both to stock 2.2 OTA, and still nothing. =/
I did just read on here somewhere that a fix was to delete the drivers for the phone and sd card and reinstall them.
And I'm sure 'someone' has seen this before, but I haven't. Apparently after a "critical" windows update this morning, now my phone won't give me the Mount USB Storage option on my phone, and it's not showing as a drive letter like it usually does when I plug in my phone. I've got debugging checked, mock locations checked. I tried rolling back windows to undo whatever has been done, but that didn't work. I tried different ROM's (sense, AOSP both) and nothing. I even tried completely uninstalling reinstalling Android SDK using the dummy-proof windows .exe program. Nothing. I'm ready to "naomi campbell" my phone straight into someone's effing forehead.
I even tried toggling USB storage in recovery (which 99% always works) and it didn't help. Blargh.
Help.
P.S. I love you, your hair is pretty. Plz help.
chattguy said:
And I'm sure 'someone' has seen this before, but I haven't. Apparently after a "critical" windows update this morning, now my phone won't give me the Mount USB Storage option on my phone, and it's not showing as a drive letter like it usually does when I plug in my phone. I've got debugging checked, mock locations checked. I tried rolling back windows to undo whatever has been done, but that didn't work. I tried different ROM's (sense, AOSP both) and nothing. I even tried completely uninstalling reinstalling Android SDK using the dummy-proof windows .exe program. Nothing. I'm ready to "naomi campbell" my phone straight into someone's effing forehead.
I even tried toggling USB storage in recovery (which 99% always works) and it didn't help. Blargh.
Help.
P.S. I love you, your hair is pretty. Plz help.
Click to expand...
Click to collapse
Bill Gates strikes again... Critical Updates are nothing more than BS, usually...Lol. Try uninstalling the last update, reboot and see if that works. Chances are, something in THEIR update broke the USB card connection through windows. I'm sure they'll fix it in another "critical update" (which seems to be every few weeks lately)... If that doesn't work, I'm lost at that point... I do know if you do system recovery/restore point, usually the updates stay in the system...
Hope that helps!
I connected my SG2 via USB cable to my PC and started seeing this error
"One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. For assistance in solving this problem, click this message."
I have tried everything from changing cables/PCs/enabling/disabling USB debugging to *#7284#, and none of them work ...
Is the device bricked, is there any hope of revival..please help i got this phone myself paying $400
Does your phone turn on and work and a connection to PC the only problem? If so your not bricked...you prolly need to install the drivers in order for your PC to recognize it so install kies on your PC
Sent from my SGH-T989 using XDA App
Yes phone turns on, charges through the port...just that it is not recognized by the PC....what could be wrong?
As I said previously you probably need to add the drivers on your PC install kies on your PC
Sent from my SGH-T989 using XDA App
Make sure you use one of your rear usb ports also. I had an issue with drivers installing in a front usb port.
Phew it turns out to be the samsung driver..I believe kies update must have corrupted and stopped the pc from recognizing the phone....
seshsud said:
I connected my SG2 via USB cable to my PC and started seeing this error
"One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. For assistance in solving this problem, click this message."
I have tried everything from changing cables/PCs/enabling/disabling USB debugging to *#7284#, and none of them work ...
Is the device bricked, is there any hope of revival..please help i got this phone myself paying $400
Click to expand...
Click to collapse
The definition of "bricked" is having a really expensive
... brick. It means your phone doesn't turn on no matter what you do to it (short of a JIG and that's not guaranteed) the "USB device not recognized thing" is a problem w many windows devices my vista computer does it all the time and I just switch ports.
Sent from my SGH-T989
I had this problem. tried everything and never got my phone to connect toy laptop. What did you do?
Sent from my SGH-T989 using Tapatalk
Having same/similar issue
Hey, was there every a solution found for this?
I'm having basically the same problem...using the cable that came with my phone, and have installed Kies (fresh). I have tried toggling multiple settings. I tried uninstalling kies and reinstalling. I tried using pdanet for the driver. I have tried a few different roms, as well: Darkside 2.4, 2.5.1, and gingersnap 1.21. All have had the same result.
When I plug the phone in, it beeps (charging) but no notification for usb settings (disk drive, sync, etc). On my computer, it pops up "USB Device Not Recognized" and says the device has malfunctioned, etc, same as OP.
In Device Manager, it shows under USB as "Unknown Device".
I have tried this with two Windows 7 laptops, and a Windows Server 2008 R2 desktop. Also tried with a different cable. This cable was able to transfer data from an external hard drive today, so I doubt anything is wrong with it.
Any help is greatly appreciated!
Chino9656 said:
Hey, was there every a solution found for this?
I'm having basically the same problem...using the cable that came with my phone, and have installed Kies (fresh). I have tried toggling multiple settings. I tried uninstalling kies and reinstalling. I tried using pdanet for the driver. I have tried a few different roms, as well: Darkside 2.4, 2.5.1, and gingersnap 1.21. All have had the same result.
When I plug the phone in, it beeps (charging) but no notification for usb settings (disk drive, sync, etc). On my computer, it pops up "USB Device Not Recognized" and says the device has malfunctioned, etc, same as OP.
In Device Manager, it shows under USB as "Unknown Device".
I have tried this with two Windows 7 laptops, and a Windows Server 2008 R2 desktop. Also tried with a different cable. This cable was able to transfer data from an external hard drive today, so I doubt anything is wrong with it.
Any help is greatly appreciated!
Click to expand...
Click to collapse
Well I had the same problem with a new sgs2 i got witb the warranty. I even made a post about it. Tried everything and nothing fixed it. Had to do another warranty exchange
Sent from Flip's SGS2
Did you try the drivers separate first or Mtp mode
Sent from my revolutionized Samsung infuse
I tried without the drivers, and went to wireless and network > USB utilities. The only option in there, however, is "Connect storage to PC". If I try that, then plug it in, the phone acts like I hit the back/undo button. It doesn't show that anything is connected, nor does it give any other options. At this point on the computer, I get the "USB device not recognized" error.
This happened before installing Kies/Drivers, and still happens after installing drivers and kies.
try another usb cable
i had the exact same error, and it ended up being a good USB cable that went south
I will try a different cable when I get home - Have a month old cable for a mytouch 4g that I know works.
Okay, I tried it with the other cable, on a desktop in the rear port. same thing...Phone start to charge, and I get the error that the device malfunctioned, yada yada.
Any other ideas? Should I try to connect in Download mode?
Alrighty, so in the end, I ended up completely unroting, using terminal emulator to remove superuser.apk, busybox, and su and putting right back to read only. Then in CWM, flashed a stock 2.3.5 ROM (Zedomax). However, I now have the 2.3.5 ROM and the 2.3.6 KL1 Kernel...
I'm planning to return to Tmobile/Samsung - will the kernel and rom versions not matching be a huge red flag??
Any help is appreciated. I have tried to flash the 2.3.5 kernel, but I always get an error that it's not signed/verified.
Ideas?
I was hoping to grab the 2.3.6 OTA update, but it says there is no firmware update. Is there an update file I can put on the SD card and update using the stock recovery?
UPDATE:
I called T-Mobile Customer Service today, and went through the "troubleshooting" with them again. They ended up sending me a new one, overnight. They didn't ask anything about doing anything custom with it like rooting or other modifications.
I'm not sure if it made a difference, but I'm within 90 days, and also have the "best" insurance/warranty coverage through T-Mobile, and whoever their insurance provider is that I signed up for when I bought the phone.
Final charge is for $5, which I was told is some kind of fee from Samsung, but will appear on my bill.
Anyway, not too bad. Can't wait to get rid of touchwiz again when I get the new phone!
Chino9656 said:
Alrighty, so in the end, I ended up completely unroting, using terminal emulator to remove superuser.apk, busybox, and su and putting right back to read only. Then in CWM, flashed a stock 2.3.5 ROM (Zedomax). However, I now have the 2.3.5 ROM and the 2.3.6 KL1 Kernel...
I'm planning to return to Tmobile/Samsung - will the kernel and rom versions not matching be a huge red flag??
Any help is appreciated. I have tried to flash the 2.3.5 kernel, but I always get an error that it's not signed/verified.
Ideas?
I was hoping to grab the 2.3.6 OTA update, but it says there is no firmware update. Is there an update file I can put on the SD card and update using the stock recovery?
UPDATE:
I called T-Mobile Customer Service today, and went through the "troubleshooting" with them again. They ended up sending me a new one, overnight. They didn't ask anything about doing anything custom with it like rooting or other modifications.
I'm not sure if it made a difference, but I'm within 90 days, and also have the "best" insurance/warranty coverage through T-Mobile, and whoever their insurance provider is that I signed up for when I bought the phone.
Final charge is for $5, which I was told is some kind of fee from Samsung, but will appear on my bill.
Anyway, not too bad. Can't wait to get rid of touchwiz again when I get the new phone!
Click to expand...
Click to collapse
FYI, I just went through the same thing. Decided to finally root my phone after owning it for 2 weeks.
Phone nor the phone would recognize USB data, but would charge. Tried another cable and no luck.
Rebooted the phone. Works like a charm now.
Hello all,
I kindly request some help regarding the following issue :
I have a rooted Galaxy Wonder GT-I8150, following the instructions on this site.
Firmware I8150XXLB4_I8150OJVLB1_I8150XXLB4
I used the phone normally for a long time. But when I woke up this morning, it was off and won't turn on no matter what method I tried.
No outside damages, no intervention, no newly installed software.
3-button-combo doesn't work. I cant put the phone into the recovery mode.
Odin doesn't recognize the phone.
Even when I connect the phone to the charger, nothing happens. The screen is black all the time.
When I connect to the computer with the usb cable, I get "device driver software was not successfully installed" qhsusb_dload
The problem is that I have important company documents stored on the phones memory, which unfortunately eliminates my
option of taking it to a Samsung Service point.
So, if I could please get any help to get the device working again, (or at least delete the company files on the phone) I would be really grateful.
So, friends, allow me to remind you NOT to put any confidential documents onto your phones' memory so that you won't have the troubles
I am experiencing now.
Looking forward to any suggestions you may have.
Regards.
have you tried installing SAMSUNG Kies on you PC? then uninstall it but do not uninstall the driver.. it may works
Ivan, I just tried your method, but sadly, the problem still persists. Thanks.
oh ok.. if like that you need a lot of experiment.. try in another computer.. Windows 7 or Vista recommended.. better don't use XP.. try changing USB port too.. move USB port to another that attached to the motherboard PC.. then if all doesn't works, pay for SAMSUNG service centre and they will fix it hehehe
hey guys.
just got a SGS3 for the wife and one for myself, coming from a long time with HTC Evos.
i'm having an embarassing situation...I don't see how to transfer files from or to the phone. I plug it in via usb, drivers installed automatically, computer told me the device was ready to be used...and nothing else. nothing popped up on the phone, nothing on my computer. the phones came with no software and Samsung's website does not list any drivers or software to download...
the phones are stock for now until I get a chance to root them this week or next weekend. in the meantime, what is the way a normal user is supposed to transfer files to/from this phone?!
I'm on Windows 7 on both the laptop and the PC, both have the same situation. with both phones...both fully stock but also updated with the latest software.
thanks for the help!
Max_Pain said:
hey guys.
just got a SGS3 for the wife and one for myself, coming from a long time with HTC Evos.
i'm having an embarassing situation...I don't see how to transfer files from or to the phone. I plug it in via usb, drivers installed automatically, computer told me the device was ready to be used...and nothing else. nothing popped up on the phone, nothing on my computer. the phones came with no software and Samsung's website does not list any drivers or software to download...
the phones are stock for now until I get a chance to root them this week or next weekend. in the meantime, what is the way a normal user is supposed to transfer files to/from this phone?!
I'm on Windows 7 on both the laptop and the PC, both have the same situation. with both phones...both fully stock but also updated with the latest software.
thanks for the help!
Click to expand...
Click to collapse
Weird...
it should pop up as a media device.
Plug it in and pull down the notification bar and touch where it says "touch for other USB options"
and make sure Media Device (MTP) is checked.
if it doesn pop up then either the drivers arent installed, or their not installed correctly.
or the cable is bad, or the USB port is bad.
or the devil is messing with you
Max_Pain said:
hey guys.
just got a SGS3 for the wife and one for myself, coming from a long time with HTC Evos.
i'm having an embarassing situation...I don't see how to transfer files from or to the phone. I plug it in via usb, drivers installed automatically, computer told me the device was ready to be used...and nothing else. nothing popped up on the phone, nothing on my computer. the phones came with no software and Samsung's website does not list any drivers or software to download...
the phones are stock for now until I get a chance to root them this week or next weekend. in the meantime, what is the way a normal user is supposed to transfer files to/from this phone?!
I'm on Windows 7 on both the laptop and the PC, both have the same situation. with both phones...both fully stock but also updated with the latest software.
thanks for the help!
Click to expand...
Click to collapse
make sure you have automatic updating on in windows, at least for the drivers. this is why i hate MTP, its such a pain in the ass. i sure hope someone gets mass storage mode goin in these soon. Make sure theres no unknown devices listed in the devices manager. then grab and install the drivers from here(although you shouldnt need them for mtp to work) http://www.samsung.com/us/support/owners/product/SPH-L710MBBSPR#
downloading now...when I plug it in, the cell phone makes a little noise. but no prompts come up under my notifications.
on the PC I found it the phone shows up under Devices & Printers, but there is no way to interact with it other than to see it's drivers and that they all apparently are up to date and functioning correctly...
ahhhhhh
Max_Pain said:
downloading now...when I plug it in, the cell phone makes a little noise. but no prompts come up under my notifications.
on the PC I found it the phone shows up under Devices & Printers, but there is no way to interact with it other than to see it's drivers and that they all apparently are up to date and functioning correctly...
ahhhhhh
Click to expand...
Click to collapse
Does it show as a plain looking generic box or does it look like an MP3 player in devices and printers?
Generic box under an "Unspecified" category. Even after reinstalling the drivers...same situation. I can't double click to open the phone and there is no prompt on my phone.
Sent from my SPH-L710 using xda premium
the phone is seeing as a modem by the PC...i'm guessing because of the drivers. can one of you tell me which drivers your phone is using (under Device Manager) so I can manually select those? I have many installed Samsung drivers, just need to know which one to pick I guess.
Max_Pain said:
the phone is seeing as a modem by the PC...i'm guessing because of the drivers. can one of you tell me which drivers your phone is using (under Device Manager) so I can manually select those? I have many installed Samsung drivers, just need to know which one to pick I guess.
Click to expand...
Click to collapse
This is crazy. I curse Samsung for this mtp ****t I swear. Under portable devices. Device name should be SPH-L710--thats what ur looking for. Will probly also be listed under modems as Samsung mobile usb modem. And in the usb devices as Samsung mobile usb composite device.another thought If you didn't already, turn on usb debugging and let it install those drivers as well. Has helped me in the past. Maybe even switchin it to download mode just so windows can see it in all modes and maybe wake the hell up.
i had usb debugging on originally, turned it off. no difference.
I went and bought a new memory card reader that supports SDXC cards, so now I can at least remove my memory card and transfer files...but still doesn't help me. I want to use that extra internal space I didn't have on my Evo 3D to add more music still to my phone...so I need to connect it to the PC somehow!
Max_Pain said:
i had usb debugging on originally, turned it off. no difference.
I went and bought a new memory card reader that supports SDXC cards, so now I can at least remove my memory card and transfer files...but still doesn't help me. I want to use that extra internal space I didn't have on my Evo 3D to add more music still to my phone...so I need to connect it to the PC somehow!
Click to expand...
Click to collapse
it blows my mind that its not working. what version of win 7 do you have? x86 or x64?
we have a laptop and a desktop, both running Windows 7 x64. we also have two of those Galaxy S3 phones. I'm running Go Launcher, my wife using the stock Wiz launcher. I have tried in different USB ports in both laptop and desktop, using different usb cables, and with both phones. with and without adb debugging enabled. same situation.
the phone shows up as a modem under device manager. under SAMSUNG Android Phone there is only SAMSUNG Android ADB Interface listed, nothing specific to this phone. I have tried changing the drivers around to different built-in samsung drivers and drivers from when I had the Galaxy Tab, nothing. I downloaded the latest drivers as they were linked above, nothing.
there are no pop-ups on either phone and nothing on the computer beyond the noise of something being plugged in...
w.t.f.
OK. Don't think its the issue but have run into this before with a Samsung phone or two. Reboot the computer and hold down f8 as its booting. When the advance menu comes up, hit *disable driver signature enforcement*. Like I said I don't think that's it but that has caused problems for me before (thanks microsoft) on x64 bit windows and a Samsung android phone so might as well rule it out.
O yeah, and just to make sure, you dont have kies installed right?
I do have Kies installed. someone now suggested I try using it to connect my phone. I open Kies, connect my phone, it says Connecting...and never goes anywhere. I did the connection troubleshooting thing, it took a while, said it was complete, plugged the phone back in, same situation.
jeez this is really stupid.
i disabled the driver enforcement option. nothing.
I rooted the phone now. installed that easy UMS apk and set the phone to MTP mode. now I have a Samsung MTP device on my device manager but none of the drivers work with it. windows couldn't find a driver, and i've tried 6 drivers manually and they all say they can't start the device.
anything else I can do now that i'm rooted?
Max_Pain said:
I do have Kies installed. someone now suggested I try using it to connect my phone. I open Kies, connect my phone, it says Connecting...and never goes anywhere. I did the connection troubleshooting thing, it took a while, said it was complete, plugged the phone back in, same situation.
jeez this is really stupid.
Click to expand...
Click to collapse
kies is the devil
its actually the opposite. You DO NOT want it installed. Uninstall kies completely. Idk how I forgot about mentioning kies.nothing but problems. Nix it and I bet this headache ends. And if u take that advice, have the phone unpluged during then removal . I would also recommend reinstalling the Samsung drivers I linked to yesterday. Then plug the phone in and I would bet smooth sail in from there
will try. now the phone shows up the "connected as media device" notice when I plug it in, and the PC sees it as an MTP device...but still not letting me use it. lets hope uninstalling KIES helps.
Max_Pain said:
will try. now the phone shows up the "connected as media device" notice when I plug it in, and the PC sees it as an MTP device...but still not letting me use it. lets hope uninstalling KIES helps.
Click to expand...
Click to collapse
Sounds like progress. I think uninstling kies will do the trick
well I uninstalled Kies, told it to uninstall any and all drivers for mobile phones. cleaned my registry. restarted my computer, installed the drivers fresh, plugged in the phone and it seems to work. for the first time it shows as a mtp device!
thanks a million. let's hope it works to transfer files.