Related
Guys, I need a little help here. I've rooted my share of phones, and even some tablets, but the Evo i bought a few days ago has been a nightmare.
For some reason, and I can't tell why, this thing will not be recognized by Windows.
It always shows up as "Unknown Device" under the USB catagory on Device Manager.
I've tried different OS versions (Windows 7 64Bit, Vista 64bit, Even Mac). I've also pulled down every form of driver I can think of (SDK Orginal version, HTC Sync, Hboot Versions, etc.)
I just cannot get this thing to be recognized. And if I manually try to update the driver and point it to one that I've downloaded, Windows tells me that the most current driver is already installed.
The bottom line is that I need to be able to connect to the phone from the comp in order to push stuff via ADB and throw commands at it. The same unknown device situation happens when the phone is in bootloader or actually booted into Stock Froyo (2.2)
Has anyone ever seen anything like this? I know i haven't, and it's buggin me out.
buster3845 said:
Guys, I need a little help here. I've rooted my share of phones, and even some tablets, but the Evo i bought a few days ago has been a nightmare.
For some reason, and I can't tell why, this thing will not be recognized by Windows.
It always shows up as "Unknown Device" under the USB catagory on Device Manager.
I've tried different OS versions (Windows 7 64Bit, Vista 64bit, Even Mac). I've also pulled down every form of driver I can think of (SDK Orginal version, HTC Sync, Hboot Versions, etc.)
I just cannot get this thing to be recognized. And if I manually try to update the driver and point it to one that I've downloaded, Windows tells me that the most current driver is already installed.
The bottom line is that I need to be able to connect to the phone from the comp in order to push stuff via ADB and throw commands at it. The same unknown device situation happens when the phone is in bootloader or actually booted into Stock Froyo (2.2)
Has anyone ever seen anything like this? I know i haven't, and it's buggin me out.
Click to expand...
Click to collapse
I've never seen that before. Wish I had something for ya. Is the Evo brand new or used? Are you sure the usb cable is good? I've seen a bad cable cause some headaches before. Wish I had more for ya, sorry man.
Sent from my PC36100 using XDA App
EVO is not new. I bough it from cragslist a few days ago. It seems to work fine otherwise. Not rooted for sure, and running Sprint original 2.2.
I did try a couple of different USB cables just to be sure, and had the same results.
The funny thing is that even though I was never able to get it "recognized" on any of my machines, I was able to get ADB so "see" it for a while. I started the rooting process by pushing files to it via ADB and even sent a reboot command to it.
Once it rebooted, that's when it all went bad. It was still showing as unrecognized (just like before), but now ADB can't see it at all. Keeps telling me no devices are connected.
Even my friend's Mac Air (which supposedly doesn't need any kind of drivers to see the phone) can't see it either.
It's just weird...
perform a hard reset, maybe a rogue app or setting got messed up,
fastboot screen>clear storage>yes
Tried that as well. Sorry i didn't mention it in the original post.
I think I've pretty much tried everything that's somewhat logical at this point.
Now I'm looking for the "illogical" ideas.
Make sure usb debugging option is turned on in settings>applications>development and the phone is in charge only mode. Then it should be recognized and you should be able to use adb.
Debugging was turned on already. I made sure of that.
As for the mode of connection I've tried them all with mixed results.
Here's what I've seen so far...
Charge only - unrecognized device in Device manager, and ADB can't see it.
HTC sync - unrecognized device in Device manager, and ADB can't see it.
Disk Drive - unrecognized device in Device manager, and ADB can't see it.
Internet Sharing - never tried it.
Here's the weird part. If i uncheck Debugging and set the phone to HTC Sync, I am sometimes able to get ADB to see it.
This is just confusing...
What happens if you uninstall HTC Sync and just leave the drivers installed? Could work I suppose. I know unrevoked says to make sure you uninstall HTC Sync and install the ADB drivers.
try this. connect your evo to a machine running xp. i had the same problems rooting one evo using windows 7. connected to a machine running xp ,zipped right through without a hitch.
HOPE THIS HELPS YOU IN YOUR QUEST
Thats what I tried on the Vista box.removed HTC sync, and left the HTC drivers.when that failed I removed the drivers too and replaced them with several different ones I found online.none seemed to work.
The strangest part is that all guides seem to say that MAC OS should just see it without any drivers.
I borrowed friends MAC air and it didn't see it either.
I'm not sure which USB drivers you are using, but these work for me. Uninstall the drivers first, then install this. I hope it is legal to put these here and if not I am extremely sorry.
PS you could try a Linux Live CD and it will see it without drivers or go with Wubi which installs Ubuntu on your Windows hard drive and can be uninstalled just like any other program. It gives you the option to boot into Ubuntu or Windows on bootup. Neat little program and it is faster than using the live CD. Go to this link Wubi and click the Start Download button to download Wubi.
Those seem to be the same drivers I've tried (well those and a ton of others as well).
I'm gonna give that LiveCD idea a shot. Burning it now.
If not, I'm gonna try to find an XP machine somewhere.
I've got a couple of VM's on my machine running XP, but since the main Win7 Machine doesn't see it, it can't seem to pass the USB connection over to the XP VM.
Man, I have to say, this is just the most complicated rooting process I've ever seen. If this was my first root attempt, I'm pretty sure I'd leave Android forever
It usually is a painless operation to root the Evo. For some reason you are having a difficult time with driver installation. It seriously has to be something simple that has been missed, because I have rooted mine and several friends Evo's and it was very easy. I had a MyTouch 3g 3.5mm before this Evo and talk about a pain. Before the Universal Auto root app you had to make a gold card first and that in itself took over an hour. It was my first root and it was very difficult and time consuming, so to see how easy the Evo was no matter which way I do it made me very happy.
buster3845 said:
Thats what I tried on the Vista box.removed HTC sync, and left the HTC drivers.when that failed I removed the drivers too and replaced them with several different ones I found online.none seemed to work.
The strangest part is that all guides seem to say that MAC OS should just see it without any drivers.
I borrowed friends MAC air and it didn't see it either.
Click to expand...
Click to collapse
yes the mac doesn't require additonal drivers to run adb however u need to make sure the directory is properly set in terminal so adb knows where to pull commands from... on windows did u try uninstalling everything phone related? SDK, HTC Sync, the whole nine yards then try reinstalling only the sdk and the usb drivers? I know with the lastest SDK the usb driver is not included for some reason or at least it wasn't with mine... then one day my adb just randomly stopped working and a uninstall/reinstall cleared up everything... try this usb driver and see where it gets u. Don't know if it's any different that wat the guy above posted but worth a shot. Reinstall the appropriate SDK first then i would recommend plugging the evo into the pc with no usb drivers installed then when it cant automatically find the drivers direct it to the file u downloaded and it should pull the necessary drivers from there and see if that does the trick...
View attachment android-usb-driver.zip
No dice so far guys...but i have made progress in identifying the issue (sort of).
So here's the deal - the ONLY way the phone is recognized is if i toggle the "debugging" setting.
If i plug the phone in with the switch set on (meaning USB Debugging enabled) the phone is not recognized. Pointing the unknown device to the drivers (any drivers) does nothing.
However, if i plug the phone in with the switch set off, it finds a usb mass storage device. Then i turn the debugging switch on, and it finds the ADB Android phone with no issues. Then i can push commands via ADB without any problems.
The problem i have is that I cannot toggle that switch if i boot into HBOOT menu. So the comp never see's the phone.
I've tried this experiment on Win7-64bit, Vista-64bit, XP 32bit, and even MAC.
The same situation seems to apply everywhere, and with all of the drivers I've tried. None of them seem to allow the phone to be plugged in and automatically be found. The only way for the comp to see the phone is if i toggle the debugging switch off, then on.
At this point, I'm ready to put out a bounty on this. $20 via PayPal to anyone who can walk me through it. Bottom line is that I need to be able to see the phone without having to toggle the debugging switch. That will allow me to boot into HBOOT and still send commands to the phone via ADB.
Thanks for all the help guys. Hopefully, we can get this resolved.
**BUMP**
Anyone care to take a shot??
Hi all...bare with me here, I posted this earlier, but in the wrong forum section so I am going to start over here.....thanks for your patience....
Hi everyone...I have a problem..I tried to use the Firerat zips to increase my internal storage, and during the flash of the zip file the phone hung and I had to pull the battery out.....since then the usb wont mount.
I am using a Tmobile mytouch slide 3g.
I tried using the sdk and running the fastboot commands etc to get the sd card to mount...no go.
I have tried the fastboot oem enableqxdm 0 command and no go....
Note:..My sd card works fine in a card reader on my computer, I can drag and drop anything to it etc. etc.
Finally i downloaded the stock rom, and i was able to put it on the card, and rename it ESPRIMG.zip and installed it through recovery...My phone was rooted and S-off running ginger, but now back to stock...S-on, and hating the phone now...lol.....
I have been all over the web and I am so confused...everywhere you search there is something different, I just dont know what to do, Windows doesnt recognize the phone when plugged in so I cant load custom rom etc back on....AARGH!!!..I am so frustrated, and have a migraine messing with this damn thing.....lol...
Someone here suggested the MISC is bad and that a binary flash_img would fix it, but honestly, I have no idea what any of that means...all that means to me is confusion, and I have that already.....lol
Can someone please suggest what I may try doing?I am pretty savvy with computers but some of the adb/shell stuff is very confusing to me, I dont like cmd prompts...so maybe a detailed explanation?..
Thank you so much for taking your time to read my problem, I really appreciate it very much.....Dirtylarry
"Kharma...It's a good thing"
ok man im gonna try to understand the problem... you say your usb mount doesnt work but the sdcard works with the adapter, then you went back to stock and un-rooted and the pc doesnt recognize your phone? right?
So it looks to me (just an idea) that the problem is your cable or the port on your pc... just beacuse your sdcard IS working in your phone as well since you used the ESPRIMG.zip(wich was really unnecessary) and you flashed it using the sdcard obviously.
Now you need to find a way to root it again just like you did the first time... dont mess with the drivers since you havent changed them in your pc (i guess) and try this guide....
http://richard.gluga.com/2010/08/complete-guide-to-rooting-and-hacking.html
Now all i can say is ALWAYS DO A NANDROID BACKUP BEFORE MESSING WITH YOUR PHONE. And check the cable/ports... thats the only problem i can think of...
well the fact that I have 3 computers that all used to recoginize the phone just fine is what's weird....none of them do, nor does my usb connection on my car stereo...the computers all say "USb not recognized" etc. etc. and the car stereo says USB N/A .......So i'm just at a loss as to what is going on here....Any ideas????? Thanks much ....Dirtylarry
Try installing PDA Net. It installs USB Drivers and resets the registry. One day it would work, then the next day it didn't work, reinstalling PDA Net worked every time.
Thanks Wave_Sailor, I tried the pda net install but it wont work....Everytime I try it says that it can't handshake to the phone, and then gives me an error code 103, I have tried many many times....also, in the device manager for computer it shows a yellow Exclamation mark everytime I plug the phone in listed at "Other Devices", and says Qualcomm CDMA Technologies MSM....So I googled, and found another thread saying Install Windows mobile 6 center, so I did, and nothing changed.......ARGH....DIrtylarry
Do part III, but while the phone is unplugged, download and install HTC Sync, and then plug the phone back in.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Ok...I did EXACTLY what you have suggested, and in the driver information box this is what I got after the install....
USB Composite device installed successfully
USB Mass Storage Device Failed
Mytouch slide tmobil installed successful
Still a no go on the Mass storage device......hmmm.....so weird of a problem to have....I would have thought that clearing everything on the phone and going back to stock would have done the trick......any more ideas?...Thanks so much for your help.....Dirty
Have you checked in device manager on your computer to see if the mass storage device has a yellow triangle? I just went through the same thing but in reverse. My pc would see the sd card while in my phone but not through the reader. I still haven't gotten it straightened out either, just learned to live with it.
dirtylarry10 said:
Ok...I did EXACTLY what you have suggested, and in the driver information box this is what I got after the install....
USB Composite device installed successfully
USB Mass Storage Device Failed
Mytouch slide tmobil installed successful
Still a no go on the Mass storage device......hmmm.....so weird of a problem to have....I would have thought that clearing everything on the phone and going back to stock would have done the trick......any more ideas?...Thanks so much for your help.....Dirty
Click to expand...
Click to collapse
Make sure you don't have any drivers disabled. Ran into that problem with a different phone. I had one driver disabled so it wouldn't install some of the other drivers.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Ok...just checked,...no drivers disabled in device manager...has to be something wrong with phone...its a/most like the driver is missing from within the phone or something...isn't there some way to get this back to where I could root it and install a custom rom again without the USB to phone connectivity and use my card reader to get some sort of files back onto phone that way?
ok....well I re-did the whole flash process over, and I am now rooted again once more.....I dont know how or why or what...but I am now going strong again.....lol thanks for the help everyone,
I have not had this problem until recently and not sure what has caused it. My phone is not showing up when I mount my SD card. Also undetected by ADB. I have tried multiple cables, different computers, and also reformatted my computer and installed fresh drivers just in case. My phone does however show up in Odin and I can flash a modem no problem. I was thinking about wiping my phone back to stock and going from there, but I am afraid that will not fix it and I will be stuck at stock. =(
Thanks,
Jaculop
Had the same problem. Had to reload the drivers even though my other Epic was recognized just fine.
Sent from my SPH-D700 using XDA App
Same here, its' like it woked one day and didn't the next. I had 2 problems, one was the fact that only half of the usb jacks on the front of my desktop work (dumbass), and I had to re-install the drivers found on Samsung.com. My computer also will not recognize the sd card until you turn on mass storage from the drop down menu on the phone after the usb is connected.
What I did was turn on USB debugging, connected the phone in the drop down menu, then went int control panel>device manager> and looked for either "Other" or something in the USB connections. I found Samsung Android. I clicked that and hit update drivers from Windows Update. It took like 30 minutes to load all the necessary drivers then connected fine after that.
I have tried uninstalling/reinstalling drivers. I am pretty sure I have tried the update driver thing through device manager, with it saying I already had an update to do driver. I have also tried with/without debugging and also manually selecting use as a mass storage device. Just kinda weird it shows up in device manager, just ADB doesn't recognize it or as a mass storage device. I am starting to think it is something more with my phone as it doesn't show up on other computer and tried other cables. May just say screw it and try Odin.
jaculop said:
I have tried uninstalling/reinstalling drivers. I am pretty sure I have tried the update driver thing through device manager, with it saying I already had an update to do driver. I have also tried with/without debugging and also manually selecting use as a mass storage device. Just kinda weird it shows up in device manager, just ADB doesn't recognize it or as a mass storage device. I am starting to think it is something more with my phone as it doesn't show up on other computer and tried other cables. May just say screw it and try Odin.
Click to expand...
Click to collapse
You can uninstall the drivers, then let Windows Update find the drivers again. It needs 5 drivers altogether. My problem was similiar. It wouldn't recognize my phone with USB debugging on, yet had no problem recognizing my other Epic so was sure my phone was screwed up. After Odin it did recognize it but wouldn't after rooting and putting on a GB leak ROM but again the other phone was fine. Forced driver update and has worked fine ever since. Although one phone shows up as F and the other as E. Not worried as long as it works...lol.
I uninstalled the Galaxy S 64bit drivers but the uninstall option that came with the package. I plugged in my phone, it attempted to find drivers and said unsuccessful. I click, search automatically and it comes back with nothing.
Also it says it is Samsung CDMA Technologies.
Edit: I just tried manually updating the drivers by pointing to the driver location instead of using the provided installation. I see only 4 drivers installed. Samsung USB Composite Device, Samsung Mobile Modem Diagnostics, and one other I am unable to find the name of.
There is also a CDC driver.
Sent from my SPH-D700 using XDA App
I fixed the problem. In case anyone else runs into it, it's simple to fix. I was afraid to ODIN back to stock in case something was wrong and unable to root/cwm again, but I grew some balls did it and it's now working flawlessly. Must have been something messed up with the system files on my epic, that even a wipe and reflash from CWM would not fix.
jaculop said:
I fixed the problem. In case anyone else runs into it, it's simple to fix. I was afraid to ODIN back to stock in case something was wrong and unable to root/cwm again, but I grew some balls did it and it's now working flawlessly. Must have been something messed up with the system files on my epic, that even a wipe and reflash from CWM would not fix.
Click to expand...
Click to collapse
Did you root and reflash your ROM and try it?
Yea, I rerooted and flashed my rom. Everything is working fine so far, along with my SD card and phone showing up on my computer. Before it was just showing up as Samsung CDMA Tech. now it is showing actually showing the samsung model number. So something happened with the phone before. Not exactly sure.
jaculop said:
Yea, I rerooted and flashed my rom. Everything is working fine so far, along with my SD card and phone showing up on my computer. Before it was just showing up as Samsung CDMA Tech. now it is showing actually showing the samsung model number. So something happened with the phone before. Not exactly sure.
Click to expand...
Click to collapse
Glad you got it working. You were lucky Odin still recognized it.
hey guys.
just got a SGS3 for the wife and one for myself, coming from a long time with HTC Evos.
i'm having an embarassing situation...I don't see how to transfer files from or to the phone. I plug it in via usb, drivers installed automatically, computer told me the device was ready to be used...and nothing else. nothing popped up on the phone, nothing on my computer. the phones came with no software and Samsung's website does not list any drivers or software to download...
the phones are stock for now until I get a chance to root them this week or next weekend. in the meantime, what is the way a normal user is supposed to transfer files to/from this phone?!
I'm on Windows 7 on both the laptop and the PC, both have the same situation. with both phones...both fully stock but also updated with the latest software.
thanks for the help!
Max_Pain said:
hey guys.
just got a SGS3 for the wife and one for myself, coming from a long time with HTC Evos.
i'm having an embarassing situation...I don't see how to transfer files from or to the phone. I plug it in via usb, drivers installed automatically, computer told me the device was ready to be used...and nothing else. nothing popped up on the phone, nothing on my computer. the phones came with no software and Samsung's website does not list any drivers or software to download...
the phones are stock for now until I get a chance to root them this week or next weekend. in the meantime, what is the way a normal user is supposed to transfer files to/from this phone?!
I'm on Windows 7 on both the laptop and the PC, both have the same situation. with both phones...both fully stock but also updated with the latest software.
thanks for the help!
Click to expand...
Click to collapse
Weird...
it should pop up as a media device.
Plug it in and pull down the notification bar and touch where it says "touch for other USB options"
and make sure Media Device (MTP) is checked.
if it doesn pop up then either the drivers arent installed, or their not installed correctly.
or the cable is bad, or the USB port is bad.
or the devil is messing with you
Max_Pain said:
hey guys.
just got a SGS3 for the wife and one for myself, coming from a long time with HTC Evos.
i'm having an embarassing situation...I don't see how to transfer files from or to the phone. I plug it in via usb, drivers installed automatically, computer told me the device was ready to be used...and nothing else. nothing popped up on the phone, nothing on my computer. the phones came with no software and Samsung's website does not list any drivers or software to download...
the phones are stock for now until I get a chance to root them this week or next weekend. in the meantime, what is the way a normal user is supposed to transfer files to/from this phone?!
I'm on Windows 7 on both the laptop and the PC, both have the same situation. with both phones...both fully stock but also updated with the latest software.
thanks for the help!
Click to expand...
Click to collapse
make sure you have automatic updating on in windows, at least for the drivers. this is why i hate MTP, its such a pain in the ass. i sure hope someone gets mass storage mode goin in these soon. Make sure theres no unknown devices listed in the devices manager. then grab and install the drivers from here(although you shouldnt need them for mtp to work) http://www.samsung.com/us/support/owners/product/SPH-L710MBBSPR#
downloading now...when I plug it in, the cell phone makes a little noise. but no prompts come up under my notifications.
on the PC I found it the phone shows up under Devices & Printers, but there is no way to interact with it other than to see it's drivers and that they all apparently are up to date and functioning correctly...
ahhhhhh
Max_Pain said:
downloading now...when I plug it in, the cell phone makes a little noise. but no prompts come up under my notifications.
on the PC I found it the phone shows up under Devices & Printers, but there is no way to interact with it other than to see it's drivers and that they all apparently are up to date and functioning correctly...
ahhhhhh
Click to expand...
Click to collapse
Does it show as a plain looking generic box or does it look like an MP3 player in devices and printers?
Generic box under an "Unspecified" category. Even after reinstalling the drivers...same situation. I can't double click to open the phone and there is no prompt on my phone.
Sent from my SPH-L710 using xda premium
the phone is seeing as a modem by the PC...i'm guessing because of the drivers. can one of you tell me which drivers your phone is using (under Device Manager) so I can manually select those? I have many installed Samsung drivers, just need to know which one to pick I guess.
Max_Pain said:
the phone is seeing as a modem by the PC...i'm guessing because of the drivers. can one of you tell me which drivers your phone is using (under Device Manager) so I can manually select those? I have many installed Samsung drivers, just need to know which one to pick I guess.
Click to expand...
Click to collapse
This is crazy. I curse Samsung for this mtp ****t I swear. Under portable devices. Device name should be SPH-L710--thats what ur looking for. Will probly also be listed under modems as Samsung mobile usb modem. And in the usb devices as Samsung mobile usb composite device.another thought If you didn't already, turn on usb debugging and let it install those drivers as well. Has helped me in the past. Maybe even switchin it to download mode just so windows can see it in all modes and maybe wake the hell up.
i had usb debugging on originally, turned it off. no difference.
I went and bought a new memory card reader that supports SDXC cards, so now I can at least remove my memory card and transfer files...but still doesn't help me. I want to use that extra internal space I didn't have on my Evo 3D to add more music still to my phone...so I need to connect it to the PC somehow!
Max_Pain said:
i had usb debugging on originally, turned it off. no difference.
I went and bought a new memory card reader that supports SDXC cards, so now I can at least remove my memory card and transfer files...but still doesn't help me. I want to use that extra internal space I didn't have on my Evo 3D to add more music still to my phone...so I need to connect it to the PC somehow!
Click to expand...
Click to collapse
it blows my mind that its not working. what version of win 7 do you have? x86 or x64?
we have a laptop and a desktop, both running Windows 7 x64. we also have two of those Galaxy S3 phones. I'm running Go Launcher, my wife using the stock Wiz launcher. I have tried in different USB ports in both laptop and desktop, using different usb cables, and with both phones. with and without adb debugging enabled. same situation.
the phone shows up as a modem under device manager. under SAMSUNG Android Phone there is only SAMSUNG Android ADB Interface listed, nothing specific to this phone. I have tried changing the drivers around to different built-in samsung drivers and drivers from when I had the Galaxy Tab, nothing. I downloaded the latest drivers as they were linked above, nothing.
there are no pop-ups on either phone and nothing on the computer beyond the noise of something being plugged in...
w.t.f.
OK. Don't think its the issue but have run into this before with a Samsung phone or two. Reboot the computer and hold down f8 as its booting. When the advance menu comes up, hit *disable driver signature enforcement*. Like I said I don't think that's it but that has caused problems for me before (thanks microsoft) on x64 bit windows and a Samsung android phone so might as well rule it out.
O yeah, and just to make sure, you dont have kies installed right?
I do have Kies installed. someone now suggested I try using it to connect my phone. I open Kies, connect my phone, it says Connecting...and never goes anywhere. I did the connection troubleshooting thing, it took a while, said it was complete, plugged the phone back in, same situation.
jeez this is really stupid.
i disabled the driver enforcement option. nothing.
I rooted the phone now. installed that easy UMS apk and set the phone to MTP mode. now I have a Samsung MTP device on my device manager but none of the drivers work with it. windows couldn't find a driver, and i've tried 6 drivers manually and they all say they can't start the device.
anything else I can do now that i'm rooted?
Max_Pain said:
I do have Kies installed. someone now suggested I try using it to connect my phone. I open Kies, connect my phone, it says Connecting...and never goes anywhere. I did the connection troubleshooting thing, it took a while, said it was complete, plugged the phone back in, same situation.
jeez this is really stupid.
Click to expand...
Click to collapse
kies is the devil
its actually the opposite. You DO NOT want it installed. Uninstall kies completely. Idk how I forgot about mentioning kies.nothing but problems. Nix it and I bet this headache ends. And if u take that advice, have the phone unpluged during then removal . I would also recommend reinstalling the Samsung drivers I linked to yesterday. Then plug the phone in and I would bet smooth sail in from there
will try. now the phone shows up the "connected as media device" notice when I plug it in, and the PC sees it as an MTP device...but still not letting me use it. lets hope uninstalling KIES helps.
Max_Pain said:
will try. now the phone shows up the "connected as media device" notice when I plug it in, and the PC sees it as an MTP device...but still not letting me use it. lets hope uninstalling KIES helps.
Click to expand...
Click to collapse
Sounds like progress. I think uninstling kies will do the trick
well I uninstalled Kies, told it to uninstall any and all drivers for mobile phones. cleaned my registry. restarted my computer, installed the drivers fresh, plugged in the phone and it seems to work. for the first time it shows as a mtp device!
thanks a million. let's hope it works to transfer files.
Okay, this is the second time this error has popped up and it's starting to get on my nerves. Anytime I plug my phone into ANY USB port, and this is counting both 2.0 and 3.0 ports, I get the error bubble: Hardware ID Missing. Windows cannot identify the device plugged into the SAMSUNG Mobile USB Composite Device." Honestly, this is beyond irritating.
For one, I am not going to reinstall Windows 7. That's too much hassle for this. Second, ever since someone plugged their Droid into my USB cable so they could charge up their phone, this message started appearing. I tried to reinstall drivers (Samsung driver exe said it couldn't install), uninstall, disable, etc etc, but finally managed to get the damn computer to read it when I stuck it in the 3.0 USB port. Now, just 10 minutes ago, I plug the phone in, I get that error, on a 3.0 USB port.
So, now I have no idea what is going on, nor how to fix it. I've tried searching, but there are no answers. Or, the possible "solutions" don't even work even remotely close.
I could really use some help on this. And, again, please do not mention "Reinstall Windows". That's just too much of a hassle and I'm not going to do that.
You may not want to try this either but try a system restore
Sent from my SPH-L710...if some one helps you press the thanks button
Volknochi said:
Okay, this is the second time this error has popped up and it's starting to get on my nerves. Anytime I plug my phone into ANY USB port, and this is counting both 2.0 and 3.0 ports, I get the error bubble: Hardware ID Missing. Windows cannot identify the device plugged into the SAMSUNG Mobile USB Composite Device." Honestly, this is beyond irritating.
For one, I am not going to reinstall Windows 7. That's too much hassle for this. Second, ever since someone plugged their Droid into my USB cable so they could charge up their phone, this message started appearing. I tried to reinstall drivers (Samsung driver exe said it couldn't install), uninstall, disable, etc etc, but finally managed to get the damn computer to read it when I stuck it in the 3.0 USB port. Now, just 10 minutes ago, I plug the phone in, I get that error, on a 3.0 USB port.
So, now I have no idea what is going on, nor how to fix it. I've tried searching, but there are no answers. Or, the possible "solutions" don't even work even remotely close.
I could really use some help on this. And, again, please do not mention "Reinstall Windows". That's just too much of a hassle and I'm not going to do that.
Click to expand...
Click to collapse
I had the same issue what ended up fixing it for me was watching when I plugged the phone in after a clean driver install and stopping Windows from downloading and installing an updated driver. Dont know if its the same for you but that fixed it for me. I was really frustrated by it and found no help either.
probably an easy fix
definitely don't need to reinstall windows or do a restore. But just to be sure, you don't have kies installed right? Seems to cause problems.if there's no kies installed, go into the device manager and find your phone whatever it's listed as right click and uninstall. Check the little box that says, "delete the driver software for this device". do this for any devices relating to yours. Including the stuff under modems,ports,USB controllers.and tick that box that delete driver software for this device every time you uninstall something. Now, not saying it's necessary but wouldnt hurt, reboot the pc. Then with your phone unplugged, reinstall the Samsung drivers for the phone. Now to make sure windows doesn't DL its own drivers,disconnect from the internet and plug the phone back in. Should be all good.
I won't do a system restore, that won't do anything. Not to mention it would erase some programs that were installed (not related to phone). So, not doing that. Also, my computer will not automatically update any drivers or any thing else, as I have it set to manual mode.
And, I do not have Kies installed. It never worked for me properly, when it came to driver installation. I've done the "go into device manager" bit many times before, it still likes to play the "Hardware ID doesn't match" card. Drivers won't install either. I don't know what it is, but damn this is the most stubborn thing I've ever encountered.
i've post this in other forums today. what i do to get it working is i toggle USB debugging and try it out, then start toggling the ptp and mtp until it works. the combo that works for me is turn on debug, plug in computer, unplug, turn off debug, plug in. if it doesnt work then i toggle back and forth MTP and PTP. 5 tries at most, for me. Also, i did a nandroid back to my oem ICS that was 2 weeks old and just rooted. the problem is worse there. i'm using freegsmr6 with trinity kernel on Tmo. hope it helps.
Ditto
Yeah that whole "Hardware ID missing" was an irritating situation. This is what I recommend as far as making it work.
1. Plug in.
2. When you get the error message, I think its because of a conflict with the ADB interface. Go to Settings, Developer Options, and check off USB Debugging.
3. Plug in once again and it should work. If not, try toggling between Camera and MTP.
I have Windows 7 Ultimate and it works fine for me
I always get that error as well with my SGS 3. I have to reinstall Kies everytime it does that which is annoying.. ANyone has a permanent solution about this?
Fix for me was...
1-plug in phone. Get the hardware ID message. Leave phone plugged in.
2- open device manager. Click on. Android Phone and Uninstall Samsung Android ADB Interface. Also check the "delete software driver" when the dialog box shows.
3-still in device manager. Scroll down to Universal Serial Bus Controllers. Uninstall Samsung Mobile USB Composite Device.
4-unplug phone.
5-reboot pc.
6-install SAMSUNG USB drivers from their site or from here
http://www.epiccm.org/2012/06/cwm-recovery-on-all-sgs3-lte-variants.html?m=1
7-reboot or not. Plug in phone.
This worked for me and no issues for the last 6 days. YMMV..
this works!
stevounit said:
yeah that whole "hardware id missing" was an irritating situation. This is what i recommend as far as making it work.
1. Plug in.
2. When you get the error message, i think its because of a conflict with the adb interface. Go to settings, developer options, and check off usb debugging.
3. Plug in once again and it should work. If not, try toggling between camera and mtp.
I have windows 7 ultimate and it works fine for me :d
Click to expand...
Click to collapse
But why this problem now out of nowhere when everything worked fine before.
Sent from my SPH-L710 using xda app-developers app
Hardware ID missing - SOLVED!!
1. Uninstall any previous instance of Kies/USB driver
2. Download the latest Kies, specific to your S3.
3. Download Samsung USB drivers 1.4.6.0 (I've tried newer versions but they all failed)
4. REBOOT
5. Disconnect from internet (VERY IMPORTANT!!! - forcing Windows to install local drivers ONLY)
6. With the phone disconnected, install Kies + USB drivers downloaded in steps 2,3
7. Connect the phone and let Windows install the drivers.
8. Reestablish the internet connection.
I've done just that, I've connected my S3 to the PC several times, I've also rebooted twice and I've never seen that stupid message again - while of course everything works as expected.
:good::good:4 days later, several times rebooted (phone and PC), several connections with Kies and I have NEVER seen that error again - it works!!
UPDATE!! (Oct.11.2012)
After a few Kies updates and going through various ROM's:
- the procedure listed above works 100% but a few steps are just not needed (redundant) - see bellow
- the problem is mostly caused by Windows "forcefully" trying to install its own drivers, rather than allowing Samsung's suggested.
- Samsung's fault is providing "updated" drivers that don't always work (hence, use the suggested 1.4.6.0 drivers)
- Following EVERY Kies update, DISCONNECT from internet before plugging your phone (otherwise you'll have to go through this, AGAIN).
Some suggested here that plugging the phone into a different USB port (without disconnecting from internet) would be the culprit - which happens to be true, but as a mere effect, not the cause: every time an unknown device is plugged into a different USB port, Windows is trying to download/install the appropriate drivers if it doesn't recognize the hardware - and there you are again.
So, the simplified procedure becomes:
1. Not needed - leave Kies installed, as is - no harm at all
2. N/A
3. YES
4. Not (always) required
5. MUST
6. MUST
7. MUST
8. Yes
Furthermore, if still interested in connecting your I747(M) as UMS (USB mass storage) the solution presented here works. I tested it myself - read my comment on this post for the very few existing hiccups.
- while installing the USB mass storage device drivers you don't have to disconnect from the internet
Install Drivers
Have you tried just installing the drivers directly from Samsung? That is all I did when I had problems and it worked.
tyler1037 said:
Have you tried just installing the drivers directly from Samsung? That is all I did when I had problems and it worked.
Click to expand...
Click to collapse
For someone experiencing the "hardware ID missing" error, just reinstalling the drivers won't do anything. Like many others, I've been banging my head trying to solve this for quite some time; the suggested steps are truly a compilation of successful ideas and trials mingled with tons of frustration, coming from my own experience as well as from many different people and forums.
If, on the other hand, you had a different type of connectivity issues - without this error, then, yes, reinstalling the drivers is Samsung's recommendation.
billard412 said:
definitely don't need to reinstall windows or do a restore. But just to be sure, you don't have kies installed right? Seems to cause problems.if there's no kies installed, go into the device manager and find your phone whatever it's listed as right click and uninstall. Check the little box that says, "delete the driver software for this device". do this for any devices relating to yours. Including the stuff under modems,ports,USB controllers.and tick that box that delete driver software for this device every time you uninstall something. Now, not saying it's necessary but wouldnt hurt, reboot the pc. Then with your phone unplugged, reinstall the Samsung drivers for the phone. Now to make sure windows doesn't DL its own drivers,disconnect from the internet and plug the phone back in. Should be all good.
Click to expand...
Click to collapse
Just wanted to say thank you. Did this and the last 2 days, works everytime. I made sure that after the first time I plugged the phone in after doing all this, and the screen pops up asking what I wanted to do, made sure to check the box for "do this everytime" and then choose the view folder option or whatever that is.
Thank you again,
Whiteice
One thing I have tried which might help others - I had the Android Developers toolkit installed on my machine, which I've removed and I also removed the HTC Sync software which was for my old desire.
Rebooted, installed the SG Toolkit (can't remember which post I found it in) and then chose option one after selecting firmware to install drivers.
I cancelled the "Windows Updates" bit of the driver detection and it found the first item, and had "item disconnected" for the remaining three.
Unplugged and plugged back in and voila it works.
This worked for approx 5 mins and then stopped, however I did all the above with debugging on, debugging is now off and all seems well (touch wood). However looking at putting on a different kernal to expose storage as mass storage and also get around cifs issues.
Hope this helps someone.
nacos said:
1. Uninstall any previous instance of Kies/USB driver
2. Download the latest Kies, specific to your S3.
3. Download Samsung USB drivers 1.4.6.0 (I've tried newer versions but they all failed)
4. REBOOT
5. Disconnect from internet (VERY IMPORTANT!!! - forcing Windows to install local drivers ONLY)
6. With the phone disconnected, install Kies + USB drivers downloaded in steps 2,3
7. Connect the phone and let Windows install the drivers.
8. Reestablish the internet connection.
I've done just that, I've connected my S3 to the PC several times, I've also rebooted twice and I've never seen that stupid message again - while of course everything works as expected.
:good::good:4 days later, several times rebooted (phone and PC), several connections with Kies and I have NEVER seen that error again - it works!!
Click to expand...
Click to collapse
Thank you so much for this. This solution worked for me.
nacos said:
1. Uninstall any previous instance of Kies/USB driver
2. Download the latest Kies, specific to your S3.
3. Download Samsung USB drivers 1.4.6.0 (I've tried newer versions but they all failed)
4. REBOOT
5. Disconnect from internet (VERY IMPORTANT!!! - forcing Windows to install local drivers ONLY)
6. With the phone disconnected, install Kies + USB drivers downloaded in steps 2,3
7. Connect the phone and let Windows install the drivers.
8. Reestablish the internet connection.
I've done just that, I've connected my S3 to the PC several times, I've also rebooted twice and I've never seen that stupid message again - while of course everything works as expected.
:good::good:4 days later, several times rebooted (phone and PC), several connections with Kies and I have NEVER seen that error again - it works!!
Click to expand...
Click to collapse
Thanks for this i will try it tomorrow as still new to these tabs.
For moment i change to camera PTP and it pops up, so at least i can use it for now.
Will let you know how i get on.
Best wishes :good:
adamspud said:
One thing I have tried which might help others - I had the Android Developers toolkit installed on my machine, which I've removed and I also removed the HTC Sync software which was for my old desire.
Rebooted, installed the SG Toolkit (can't remember which post I found it in) and then chose option one after selecting firmware to install drivers.
I cancelled the "Windows Updates" bit of the driver detection and it found the first item, and had "item disconnected" for the remaining three.
Unplugged and plugged back in and voila it works.
This worked for approx 5 mins and then stopped, however I did all the above with debugging on, debugging is now off and all seems well (touch wood). However looking at putting on a different kernal to expose storage as mass storage and also get around cifs issues.
Hope this helps someone.
Click to expand...
Click to collapse
The Android Developers toolkit DOES install the USB drivers 1.4.6.0 - which seems to be the ONLY one that works, BUT the rest of the steps suggested in my previous post are needed in order to get rid of the problem - otherwise the fix is just temporary.
Re-loading OS drivers corrected issue.
tyler1037 said:
Have you tried just installing the drivers directly from Samsung? That is all I did when I had problems and it worked.
Click to expand...
Click to collapse
I removed the updates to Kies on my Note and uninstalled the Kies update on the PC which is what started this issue of the OS not recognizing the device and then a fresh driver load for my phone from the Samsung site. Worked Perfectly, Thanks!
Cowoholy