Develop Bugs

[Q] Htc Desire ermmm bricked :(

Evening everyone
Got a BIG problem with my phone today and having searched and read i still cant fix it
Ok a little about my phone: Rooted with amon recovery, recently s/off, CyanogenMod 7 rom and kernel, -32 radio..
Right here is the problem...
Did a nandroid backup in recovery of the rom i was using ^^ and all seemed fine, i then rebooted my phone,, booted up, waited for everything to work and then i noticed my apps weren't there?
Went into storage and it showed no memory card,, so i rebooted phone hoping this might fix but it didn't.
Plugged my phone into laptop and a message flashed up "usb device not recongnised" i though Sh!t whats happened ?
So i booted my phone into recovery to mount the sd and a message again "error cant mount sd"
Clicked reboot phone and now its stuck on the "why so serious" screen ???????
Ive dloaded the sdk tool but really not sure what i should be typing in there ??
Anyone with a little time care to help me out please lol ???
Cheers
EDIT: I have flashed nearly every rom on xda since i rooted about 4 months ago without any problems, always did the wipes in recovery before flashing so really dont know what has happened here ?

Try formatting SD card, if that doesn't work, reflash recovery
Sent from my Vanilla Tazz using XDA App

Hi mate.
Forgot to mention i did format sd card on pc "fat32" using a sd card reader but that aint solved it
Not re flashed recovery though....
Edit: how can i re flash recovery if my lappy wont recongnise phone
knipp21 said:
Try formatting SD card, if that doesn't work, reflash recovery
Sent from my Vanilla Tazz using XDA App
Click to expand...
Click to collapse

chrisvr4 said:
Hi mate.
Forgot to mention i did format sd card on pc "fat32" using a sd card reader but that aint solved it
Not re flashed recovery though....
Edit: how can i re flash recovery if my lappy wont recongnise phone
Click to expand...
Click to collapse
Looks like you have been usb bricked, look this forum for usb brick fix, its not the fault of the rom, it just sometimes happens. Got it once too, easely to fix.
Sent from my HTC Desire

Im not blaming the rom not one bit as its been running fine this morning up untill i did the backup.
I have read and read that much my heads spinning %-( there's hek of a lot to take in and being a rather noooooob im lost as to what i should do

Worstenbrood is right, that's.just a USB brick, don't worry, it's an easy fix. Search Modaco for USB rickrolled.
http://android.modaco.com/content/h...com/309939/usb-brick-rickrolled-b0rked-fixed/
You can skip step one.

Not to worry ? im bricking it lmao
I really aint got a clue about the fastboot thingy if you have a little time could you give me a step by step of how its done
cheers

Download the SDK and then use the command prompt to run the fastboot command from the Modaco tutorial.
There are quite a few guides for fastboot, just Google it

Hi
I just ran the command and when entered it said fastboot not found?

You need to run it from the directory containing fastboot.executive (in the SDK).

thanks for the replies
i have tried that but im getting 'adbwinapi.dll is missing from your computer'
i have re-installed sdk and still wont work?

Did you do this
Windows XP / Vista
Right click on the My Computer icon and select the properties tab.
Select the Advanced tab and click the Environment Variables button.
In the new dialog box dowble-click on Path (located under System Variables) and type in the full path location to the tools directory.
Has to be done for it to work
If you have never used sdk before Google for a good install & how to use guide

whooohoooo right solved the sd problem, new rom flashed and powered up Many Thanks guys "but" i still cant use the usb on laptop ?
When i plug usb in it the phone only charges ? and an usb not recognised message ?

did u install the htc drivers from the htc website? i was having problems with connecting my phone dowloaded those and un-installed sync and all was fixed!

i get 'usb not recognised message' every now and then on my home pc and the works pc both running Windows 7 64bit.
I found that usually when it pops up about
'usb not recognised message'
i just unplug the cable then back in a few seconds after the message then it usually connects ok. sometimes it takes a few attempts.
thats with 'HTC Wildfire_setup_3.0.5481' installed for the 64bit drivers.

Thanks very much guys for all your help managed to get the usb fixed by installing htc sync
But now i have another problem i noticed today is Bluetooth wont turn on ? is there a fix out there for this ?
cheers

Im experiencing strange reboots now with phone plugged into laptop via usb, and on the status bar on phone it show usb debugging and then dissapears and comes back and when i unplug usb the phone reboots?
I wiped the laptop yesterday and phone seemed fine and now the troubles have come back
In logcat error im also getting this message when i enable bluetooth
attempting to remove unknown iface (usb0), ignoring
bt_enable: Timeout waiting for HCI device to come up
Seems as if the brick has actually fooked my phone up good and proper !

[Q] USB Storage doesn't show up in windows 7

I have not had this problem until recently and not sure what has caused it. My phone is not showing up when I mount my SD card. Also undetected by ADB. I have tried multiple cables, different computers, and also reformatted my computer and installed fresh drivers just in case. My phone does however show up in Odin and I can flash a modem no problem. I was thinking about wiping my phone back to stock and going from there, but I am afraid that will not fix it and I will be stuck at stock. =(
Thanks,
Jaculop

Had the same problem. Had to reload the drivers even though my other Epic was recognized just fine.
Sent from my SPH-D700 using XDA App

Same here, its' like it woked one day and didn't the next. I had 2 problems, one was the fact that only half of the usb jacks on the front of my desktop work (dumbass), and I had to re-install the drivers found on Samsung.com. My computer also will not recognize the sd card until you turn on mass storage from the drop down menu on the phone after the usb is connected.

What I did was turn on USB debugging, connected the phone in the drop down menu, then went int control panel>device manager> and looked for either "Other" or something in the USB connections. I found Samsung Android. I clicked that and hit update drivers from Windows Update. It took like 30 minutes to load all the necessary drivers then connected fine after that.

I have tried uninstalling/reinstalling drivers. I am pretty sure I have tried the update driver thing through device manager, with it saying I already had an update to do driver. I have also tried with/without debugging and also manually selecting use as a mass storage device. Just kinda weird it shows up in device manager, just ADB doesn't recognize it or as a mass storage device. I am starting to think it is something more with my phone as it doesn't show up on other computer and tried other cables. May just say screw it and try Odin.

jaculop said:
I have tried uninstalling/reinstalling drivers. I am pretty sure I have tried the update driver thing through device manager, with it saying I already had an update to do driver. I have also tried with/without debugging and also manually selecting use as a mass storage device. Just kinda weird it shows up in device manager, just ADB doesn't recognize it or as a mass storage device. I am starting to think it is something more with my phone as it doesn't show up on other computer and tried other cables. May just say screw it and try Odin.
Click to expand...
Click to collapse
You can uninstall the drivers, then let Windows Update find the drivers again. It needs 5 drivers altogether. My problem was similiar. It wouldn't recognize my phone with USB debugging on, yet had no problem recognizing my other Epic so was sure my phone was screwed up. After Odin it did recognize it but wouldn't after rooting and putting on a GB leak ROM but again the other phone was fine. Forced driver update and has worked fine ever since. Although one phone shows up as F and the other as E. Not worried as long as it works...lol.

I uninstalled the Galaxy S 64bit drivers but the uninstall option that came with the package. I plugged in my phone, it attempted to find drivers and said unsuccessful. I click, search automatically and it comes back with nothing.
Also it says it is Samsung CDMA Technologies.
Edit: I just tried manually updating the drivers by pointing to the driver location instead of using the provided installation. I see only 4 drivers installed. Samsung USB Composite Device, Samsung Mobile Modem Diagnostics, and one other I am unable to find the name of.

There is also a CDC driver.
Sent from my SPH-D700 using XDA App

I fixed the problem. In case anyone else runs into it, it's simple to fix. I was afraid to ODIN back to stock in case something was wrong and unable to root/cwm again, but I grew some balls did it and it's now working flawlessly. Must have been something messed up with the system files on my epic, that even a wipe and reflash from CWM would not fix.

jaculop said:
I fixed the problem. In case anyone else runs into it, it's simple to fix. I was afraid to ODIN back to stock in case something was wrong and unable to root/cwm again, but I grew some balls did it and it's now working flawlessly. Must have been something messed up with the system files on my epic, that even a wipe and reflash from CWM would not fix.
Click to expand...
Click to collapse
Did you root and reflash your ROM and try it?

Yea, I rerooted and flashed my rom. Everything is working fine so far, along with my SD card and phone showing up on my computer. Before it was just showing up as Samsung CDMA Tech. now it is showing actually showing the samsung model number. So something happened with the phone before. Not exactly sure.

jaculop said:
Yea, I rerooted and flashed my rom. Everything is working fine so far, along with my SD card and phone showing up on my computer. Before it was just showing up as Samsung CDMA Tech. now it is showing actually showing the samsung model number. So something happened with the phone before. Not exactly sure.
Click to expand...
Click to collapse
Glad you got it working. You were lucky Odin still recognized it.

USB problem

I'm running cyanogenmod 7 on my evo 4g and when I plug it into a computer it only charges and never prompts me if I want to connect as a disk drive. It used to but now it just stopped. I had a backup of my rom so I put it on my girlfriends evo and hers still connected to the pc like normal but mine will not give me the option to hook up through USB. My computer says unknown device. Any help would be great. I can provide more info if you need.

More info. It gives me code 43 in windows 7. I was able to hook it up in xp but when I tried doing anything it no longer was able to detect the phone. I did a factory reset and it still doesn't work. I'm at a complete loss. I feel the only thing left to do is revert completely back to stock losing root and starting from scratch.

perhaps try completely uninstalling the device from windows in Device Manager. Then plug it in again and let it re-install the drivers

sitlet said:
perhaps try completely uninstalling the device from windows in Device Manager. Then plug it in again and let it re-install the drivers
Click to expand...
Click to collapse
I've tried that on two different computers with windows 7. My gfs fone reads fine with the exact same rom but mine wont.

It seems like the drivers on the phone are corrupted or something. At one point I found a forum that suggested to turn off bluetooth and a few other things. I decided to see if turning off my wifi would do anything and finally my phone showed the usb debugging notification and the mount as usb notification but it wouldn't mount so I restarted my phone and now it's back to doing nothing but charge the phone.

The only difference between the two phones is the rom then? Perhaps make a backup and flash a different rom or re-flash your current rom to see if that helps

sitlet said:
The only difference between the two phones is the rom then? Perhaps make a backup and flash a different rom or re-flash your current rom to see if that helps
Click to expand...
Click to collapse
I actually took a backup of my rom and put it on my gfs phone and hers worked. we had the exact same rom. I will try installing a different rom however and i'll let you know what happens.

Okay so I had a back up of sinister rom so I restored it and now it asks me if I want to connect as a usb device and so I do and my computer still says usb device not recognized or whatever.

Wow so I tried a backup of sinister rom that I had and suddenly it asked if i wanted to connect as a disk drive but windows was still saying usb device not recognized. I reverted all the way back to stock losing root privileges and it still doesn't work. It appears to me that it is a hardware problem. I don't know what else to do.

ok, so I hooked my phone up to a computer with ubuntu on it and my phone showed up but then when I went to explore the sd card it said permission denied. Then I hooked it up in windows 7 and it showed unknown device under universal serial bus controllers(as usual) but it also had it under modem, which is what I want.

Okay, got it working on this computer. After plugging the phone in several times it still said device not recognized. I have also been pushing ##data# and it was saying the same thing. I decided to shut my phone off one last time and when I hooked it up i pushed ##diag# and now it works. ****ing stupid. Glad it's working now.
UPDATE: Now all of the drivers install when I plug the phone in except the HTC DIAG doesn't appear even when i enter diag mode on the phone. this is the only driver i need installed but i can't install it because the computer isn't picking up that part of the device....This is getting irritating.

Turns out my port is ****ed up. I'm gonna have to order a new one and replace it.

Computer not reading sd card when phone is..

Help. I don't know what happened but my evo is not being read by my.computer, only reads my sd card if I plug it in separate(sd reader). It was workin perfectly this morning, then I tried usb theter my laptop and got it to work. Went back to pc and I get this error. I didn't move any settings exept download clockwork tether. Please help

oscar996 said:
Help. I don't know what happened but my evo is not being read by my.computer, only reads my sd card if I plug it in separate(sd reader). It was workin perfectly this morning, then I tried usb theter my laptop and got it to work. Went back to pc and I get this error. I didn't move any settings exept download clockwork tether. Please help
Click to expand...
Click to collapse
Exactly what error do you get?
Did you CHECK "Don't ask me again" on the window that pops up when you plug it in?
Go to system settings => Connect to PC
There should be a box that you check/uncheck to make that window pop up.
When you plug it in, do you get the USB notification in the notification window? Can you click on it to change the connection type?
Is there any other useful info you can provide?

I had a EVO recently that the usb internals died techs couldn't even repair ... Or just make sure double check you have drivers installed , usb debug checked too
Sent from my PC36100 using XDA

Well thing is,it works on my laptop but not on my PC(WHICH USED to work cus I rooted there) I'm gonna try and install the drivers on pc,the ones I recently used on laptop.
It only charges the phone cus the light is on.but the notification doesn't come up nomore,

I'm on cm7 with tiamat kernel

I haven't had any problems with that ROM and kernel combo.
Have you tried different USB ports on your computer and different USB cords?
I can't think of anything else other than what's been mentioned.
If you have any more info, that might trigger a thought in someone's mind.
Make sure to post again when you figure it out!

I reinstalled the driver and it solved theproblem.
Kinda weird tho cus just because i installed the phone to laptop, pc failed to recognized it(maybe pc got jealous lol)

Hard Bricked LG E980 USB device not recognised

My LG E980 is bricked. I can access download mode and that is it! I am unable to boot into recovery,
and the hard reset screen simply sits there forever. My computer only recognizes my device as an "unknown usb device."
I'm unsure what can be done about this, but I feel like this is better than the infamous QHSUB icon displayed when the device cannot be recovered.
Does anyone have a remedy for this problem?? I have GOT to fix this phone and can't afford to Jtag the device, but I'm losing hope that this is possible, PLEASE help. :crying:

Have you installed the LG drivers for your pc and tried the unbrick method?

Yeah dude there's an unbrick method. If this doesn't work just sell the phone on Ebay. http://forum.xda-developers.com/showthread.php?t=2302660

There is never a time when this device cant be recovered. even the qhusb is a fairly simple fix. ill go ahead and make a sdcard boot image tonight. do you have a 32gb sdcard? (or larger) and an sdcard reader, if you have those two things i can make an unbrick.img that you flash toi the sdcard and put in the non-booting phone and it will get you to download mode/recovery mode. ill have to check out what partitions are where as i dont wish to include my efs along with it all .

twill1987 said:
My LG E980 is bricked. I can access download mode and that is it! I am unable to boot into recovery,
and the hard reset screen simply sits there forever. My computer only recognizes my device as an "unknown usb device."
I'm unsure what can be done about this, but I feel like this is better than the infamous QHSUB icon displayed when the device cannot be recovered.
Does anyone have a remedy for this problem?? I have GOT to fix this phone and can't afford to Jtag the device, but I'm losing hope that this is possible, PLEASE help. :crying:
Click to expand...
Click to collapse
Happened to me.
1. With the phone on download mode and plugged in the computer; uninstall the unknown device on your computer using device manager. The computer should try to get the drivers for your phone.
2. If it doesn't. Repeat step one and install the drivers first.
That worked for me hopefully I'll work for you.
Sent from my LG-E980 using XDA Premium 4 mobile app

Yes
riki126 said:
Have you installed the LG drivers for your pc and tried the unbrick method?
Click to expand...
Click to collapse
Yes I tried that. The drivers won't install. I even used another windows 8 computer my roommate has and switched out
the usb cables, still came back "unknown device"

shabbypenguin said:
There is never a time when this device cant be recovered. even the qhusb is a fairly simple fix. ill go ahead and make a sdcard boot image tonight. do you have a 32gb sdcard? (or larger) and an sdcard reader, if you have those two things i can make an unbrick.img that you flash toi the sdcard and put in the non-booting phone and it will get you to download mode/recovery mode. ill have to check out what partitions are where as i dont wish to include my efs along with it all .
Click to expand...
Click to collapse
I do have a 16gb sd card, but I can pick up at 32 gb sd at my local best buy. I have an Asus laptop running windows 8 and it has an SD card reader. I am a little confused (semi-noob) as to how this will work because my phone will boot up, and the led changes colors on the home button for about 4 seconds and then the light stops flashing. The phone is stuck on the LG boot screen, and there is no way out of it but to pull the battery or to reset with power button. Of course no recovery as previously mentioned. I really just want to get back to stock, but I can't manage to get both the windows 8 computers I've tried to detect the phone in download mode. Ever since I switched to the Candykat rom 4.4 the computer wasn't able to recognize the phone, even when the phone was fully functional inside the rom.
I have tried it on my dads windows 7 laptop as well with no dice. Instaled LG drivers, uninstalled LG Drivers, uninstalled device from the Device Manager. I've done everything I could think of. I previously was in a Philz touch recovery, but every rom I tried to flash wouldn't work. I tried to flash another recovery from inside it and then the device bricked like it is now. What a head ache. If you think this method would work, I am more than willing to try it, just unfamiliar with what I need to do on my end.

Okay
stulzerl said:
Happened to me.
1. With the phone on download mode and plugged in the computer; uninstall the unknown device on your computer using device manager. The computer should try to get the drivers for your phone.
2. If it doesn't. Repeat step one and install the drivers first.
That worked for me hopefully I'll work for you.
Sent from my LG-E980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I will give your method a shot, but I have done this a lot already. The only thing I can think of is I usually unplug the phone from the computer right after deleting the drivers and uninstalling in device manager. Maybe I should just leave the phone plugged in and see if the computer automatically downloads the drivers, but I don't think it will because I've tried to update the drivers before. It gives me an error code "10" and says the device has malfunction or stopped working This phone has been undetectable via USB since flashing the candykat 4.4 rom. Every computer I've tried (3) and every USB cable (3 again) has displayed it as an "unknown device"

twill1987 said:
I will give your method a shot, but I have done this a lot already. The only thing I can think of is I usually unplug the phone from the computer right after deleting the drivers and uninstalling in device manager. Maybe I should just leave the phone plugged in and see if the computer automatically downloads the drivers, but I don't think it will because I've tried to update the drivers before. It gives me an error code "10" and says the device has malfunction or stopped working This phone has been undetectable via USB since flashing the candykat 4.4 rom. Every computer I've tried (3) and every USB cable (3 again) has displayed it as an "unknown device"
Click to expand...
Click to collapse
I've had similar issues when i had my optimus g. I had to use a pc with xp to flasht he phone, dunno why though. You could give that a shot.

twill1987 said:
I do have a 16gb sd card, but I can pick up at 32 gb sd at my local best buy. I have an Asus laptop running windows 8 and it has an SD card reader. I am a little confused (semi-noob) as to how this will work because my phone will boot up, and the led changes colors on the home button for about 4 seconds and then the light stops flashing. The phone is stuck on the LG boot screen, and there is no way out of it but to pull the battery or to reset with power button. Of course no recovery as previously mentioned. I really just want to get back to stock, but I can't manage to get both the windows 8 computers I've tried to detect the phone in download mode. Ever since I switched to the Candykat rom 4.4 the computer wasn't able to recognize the phone, even when the phone was fully functional inside the rom.
I have tried it on my dads windows 7 laptop as well with no dice. Instaled LG drivers, uninstalled LG Drivers, uninstalled device from the Device Manager. I've done everything I could think of. I previously was in a Philz touch recovery, but every rom I tried to flash wouldn't work. I tried to flash another recovery from inside it and then the device bricked like it is now. What a head ache. If you think this method would work, I am more than willing to try it, just unfamiliar with what I need to do on my end.
Click to expand...
Click to collapse
I dont know lg's download mode, kdz, tot etc all that well. im more of a samsung guy. however qualcomm since the s4 chipset has allowed for sdcards that are properly formatted to boot the os instead of the internal emmc. here is a decent guide, just need to make teh image for this device. this will let your device boot no matter how bad it gets you are welcome to try with 16gb, the rule of thumb i know of is as big as teh emmc is use that same size or larger sdcard, however some people have had sucess withs maller, just not many that i know of. http://forum.xda-developers.com/showthread.php?t=2439367
however afaik the only way to reflash teh bootloader partitions is via kdz/download mode so perhaps the sdcard will let you get into that mode and then you can flash, so long as you keep your sdcard like that it will boot fully, but in order ot get your sdcard back you need to repair teh files on your phone .

Thanks
WeActOnImpulse said:
Yeah dude there's an unbrick method. If this doesn't work just sell the phone on Ebay. http://forum.xda-developers.com/showthread.php?t=2302660
Click to expand...
Click to collapse
I have tried this and unfortunately since the USB drivers aren't detected by the computer there is no way for me to flash back to stock.
Thanks for the information though, I appreciate it.

shabbypenguin said:
I dont know lg's download mode, kdz, tot etc all that well. im more of a samsung guy. however qualcomm since the s4 chipset has allowed for sdcards that are properly formatted to boot the os instead of the internal emmc. here is a decent guide, just need to make teh image for this device. this will let your device boot no matter how bad it gets you are welcome to try with 16gb, the rule of thumb i know of is as big as teh emmc is use that same size or larger sdcard, however some people have had sucess withs maller, just not many that i know of. http://forum.xda-developers.com/showthread.php?t=2439367
however afaik the only way to reflash teh bootloader partitions is via kdz/download mode so perhaps the sdcard will let you get into that mode and then you can flash, so long as you keep your sdcard like that it will boot fully, but in order ot get your sdcard back you need to repair teh files on your phone .
Click to expand...
Click to collapse
Wow, that sounds awesome. I followed most of that. I access download mode on the device by pressing vol up and down simultaneously and plugging in the usb cable. I am more willing to try this, and if it works I will pay you from my paypal. I guess all I need now are those files to run to the sd card. I read the tutorial you posted for the samsung and downloaded the windows disk manager. I am eager to try this method, though it is admittedly very new to me.. If you can post those files, I will follow the instructions you give and pay you a little bit of money for your help!
I am a broke college student so it won't be much, but I really appreciate your response and information on this method with the qualcomm s4.

Here is the unbrick image. follow the guide for your platform (gunna guess windows) and write this to your sdcard after backing it up. from there you need to restore your partitions by flashing them .
https://mega.co.nz/#!YB5xWQ7Y!Qcnx9UmcNn-f6skfiIFN-jd0EeYxdmrQGA1zzP5hfA0

Just wrote it to sd card
shabbypenguin said:
Here is the unbrick image. follow the guide for your platform (gunna guess windows) and write this to your sdcard after backing it up. from there you need to restore your partitions by flashing them .
https://mega.co.nz/#!YB5xWQ7Y!Qcnx9UmcNn-f6skfiIFN-jd0EeYxdmrQGA1zzP5hfA0
Click to expand...
Click to collapse
Okay so I bought the 32 gb sd card. Just wrote the .img file you sent me to the sd card.
I powered on the phone and nothing happened, I got the same LG screen where the led flashes and then stops.
I followed that guide, but am I supposed to go to download mode instead of just powering on the device?
I got a little confused by the samsung jargon lol. I just want to know after I've written the unbrick.zip to the sd card
how do I get my phone to recognize the card is there? And once I am able to do that how do I "restore my partitions by flashing them?"
I do have the factory firmware set to flash through lg flashtool, but the phone can't be detected of course due to the usb issue.
Just want to say thanks for walking me through it this far, I feel like I'm close hopefully but unsure what to do next.

twill1987 said:
Okay so I bought the 32 gb sd card. Just wrote the .img file you sent me to the sd card.
I powered on the phone and nothing happened, I got the same LG screen where the led flashes and then stops.
I followed that guide, but am I supposed to go to download mode instead of just powering on the device?
I got a little confused by the samsung jargon lol. I just want to know after I've written the unbrick.zip to the sd card
how do I get my phone to recognize the card is there? And once I am able to do that how do I "restore my partitions by flashing them?"
I do have the factory firmware set to flash through lg flashtool, but the phone can't be detected of course due to the usb issue.
Just want to say thanks for walking me through it this far, I feel like I'm close hopefully but unsure what to do next.
Click to expand...
Click to collapse
you wrote the image to the sdcard? i wonder if its because you still have the low level bootloaders that it may not be booting from the sdcard, normally this is done to fix qhusb errored devices. as for restoring the partitions all you would need to do is one its booted up push the unbrick image to the phone and use rooted adb shell to write it back onto your phone.

Possible hope??
shabbypenguin said:
you wrote the image to the sdcard? i wonder if its because you still have the low level bootloaders that it may not be booting from the sdcard, normally this is done to fix qhusb errored devices. as for restoring the partitions all you would need to do is one its booted up push the unbrick image to the phone and use rooted adb shell to write it back onto your phone.
Click to expand...
Click to collapse
I meant I used the windows tool to write the debrick.img to the sd card. But no dice, the device isn't recognised.
However! I installed a driver clean up tool and now if I plug in the device it is recognized as Android Original ADB Interface.
The LG Flashtools even says the port is ready! But I get the error code "10" "device cannot start, A request for the USB device descriptor failed."
So now I am stuck on that instead lol. This just sucks.

that sucks about the sdcard, it must be because you arent "truly" bricked. sorry i thought it would help ya :/.

What is the driver repair tool you used? I know this thread is old but I'm having the same problem. I was trying to root my E980 and now my computer wont recognize my device. The phone works perfect, its just when I plug it in to the computer it isnt recognized. How can I fix this?

+1
Just wondering if anyone's come across a solution to this besides a sledge hammer... been having the same "Code 10: Device failed to start" when in Download Mode, though Windows finds a driver fine when the phone is stuck on the LG screen... doesn't help much, though, 'cause it won't receive adb commands. I manually installed the LG USB Composite Device driver, which added a modem and a COM port, both of which Windows recognized to be active, but the LG FlashTool USB Viewer showed no open pipes. I'm a relative noob, so please feel free to point out the obvious, like an alternative to adb that the phone can always receive or a way to brick it the rest of the way so the MicroSD trick will work.

I came across this problem like the OP and just wanna let everyone know that you have to use computer with USB 2.0 port then the driver issue would be fixed.