Help. I don't know what happened but my evo is not being read by my.computer, only reads my sd card if I plug it in separate(sd reader). It was workin perfectly this morning, then I tried usb theter my laptop and got it to work. Went back to pc and I get this error. I didn't move any settings exept download clockwork tether. Please help
oscar996 said:
Help. I don't know what happened but my evo is not being read by my.computer, only reads my sd card if I plug it in separate(sd reader). It was workin perfectly this morning, then I tried usb theter my laptop and got it to work. Went back to pc and I get this error. I didn't move any settings exept download clockwork tether. Please help
Click to expand...
Click to collapse
Exactly what error do you get?
Did you CHECK "Don't ask me again" on the window that pops up when you plug it in?
Go to system settings => Connect to PC
There should be a box that you check/uncheck to make that window pop up.
When you plug it in, do you get the USB notification in the notification window? Can you click on it to change the connection type?
Is there any other useful info you can provide?
I had a EVO recently that the usb internals died techs couldn't even repair ... Or just make sure double check you have drivers installed , usb debug checked too
Sent from my PC36100 using XDA
Well thing is,it works on my laptop but not on my PC(WHICH USED to work cus I rooted there) I'm gonna try and install the drivers on pc,the ones I recently used on laptop.
It only charges the phone cus the light is on.but the notification doesn't come up nomore,
I'm on cm7 with tiamat kernel
I haven't had any problems with that ROM and kernel combo.
Have you tried different USB ports on your computer and different USB cords?
I can't think of anything else other than what's been mentioned.
If you have any more info, that might trigger a thought in someone's mind.
Make sure to post again when you figure it out!
I reinstalled the driver and it solved theproblem.
Kinda weird tho cus just because i installed the phone to laptop, pc failed to recognized it(maybe pc got jealous lol)
Related
Hey there.
Ok I have a problem. I have had my touch pro 2 for about 6 months now and i am really happy with it, but recently i have ran into a problem.
My phone won't connect to my computer anymore! Not just my computer... no computer at all. Not just activesync, no, it doesn't recognise it at all, not even as a disk drive.
I doubt its the cable because it does charge, and i have tried another cable (not a htc cable but its a cable with the same plug, its from my external harddrive) and it still didn't work.
I also tried a hard-reset on my phone, but still... nothing.
Ive read somewhere that you should push the usb connector a bit up, i did that, but nothing (now the usb connector seems wiggly... glad it still charges though) i have no idea what it could be and i thought i'd post here first before going back to the dealer with it. Because without usb connection i can't install costum roms and that we wouldn't want that, do we?
Well, hope one of you guys can help!
That's very strange I have had it once, but that was due to the rom I used. I flashed another rom and it worked again.
What you could try is to download a new rom and put it on your sd car using this:
http://www.julien-manici.com/windows_mobile_wifi_remote_access/
This let's you put stuff on your mobile using wifi. It's worth a try.
But you have to install roms directly from your pc to your phone, while being connected to USB right? The standards htc roms for example can only be installed that way i think... or can you also copy the .exe to your device and run that?
i'll give it a go when i get home. Thanks =]
I am having the same issue here. All of a sudden my PC or Laptop doesn't see the phone at all but it does charge with no issues. When I plug it in I don't even get the sound that the PC knows something was jut plugged into it.
go to settings - connection - usb to pc - untick the enable faster synchronization box
that should do it
As long as you have Hard SPLed your Rhodium you should be able to use the sd card method to install a rom instead of using the PC and usb connection.
You copy the rhodium.nbh file to the root directory of an sd card formatted FAT32 and then boot into bootloader - volume down and power button when off.
Follow the onscreen prompts...
Cheers...
This sounds familiar - http://forum.xda-developers.com/showthread.php?t=741406
Lennyz1988 said:
That's very strange I have had it once, but that was due to the rom I used. I flashed another rom and it worked again.
Click to expand...
Click to collapse
What's interesting with my Tilt2 (not the OP) was that I wanted to flash my ROM with the new AT&T "unofficial" ROM and that's when I found out I couldn't tether. I basically just wanted to tether my phone so I could put that new ROM onto the phone to see if I could make it more reliable and faster. Sigh.
it actually might be the cord...
The same exact thing happened to me... my phone charged with the cord but no computer recognized it...
I bought a new usb cable from radio shack and viola it worked again... so I advise u just trying a new one and if it doesn't work take it back... but try the unchecking the "check for faster sync" box first like someone said bc that do stop it from being recognized sometimes...
mr_sheen said:
go to settings - connection - usb to pc - untick the enable faster synchronization box
Click to expand...
Click to collapse
Yes, this has (almost) always fixed the issue for me. Somehow WDC becomes blind to new device inserts after you plug-unplug them several times.
Slow but stable is better.
I was trying to put the hum/hiss sound fix on my sd card and I cannot get my pc to connect via USB...
My wife has a TP2 and it connects fine...
I have tried with/without the sd card in, rebooted the pc and phone, rebooted the phone while connected to the pc.... nothing...
wtf...
anyone else with this problem?
PS... NRGZ28 had posted a very basic rom for booting to android back in Feb and it is now gone from hotfile. Anyone know of a quick boot into android?
- Try a different computer
- Try a hard reset
That are the first thing you should do.
Tried hard reset...
Dif PC is not an option at the moment... I have rebooted...
Just flashed the ROM (NRGZ newest, thank goodness I had it on my SD card) and I still cant get it to sync...
I have attached the USB error I am getting... (Win7, new install)
The phone is not asking if I want to active sync or use as storage???? wtf...
FarBeyond said:
Just flashed the ROM (NRGZ newest, thank goodness I had it on my SD card) and I still cant get it to sync...
I have attached the USB error I am getting... (Win7, new install)
The phone is not asking if I want to active sync or use as storage???? wtf...
Click to expand...
Click to collapse
Reboot your PC? lol bet your tried that already...
Try this:
settings > connections > usb to pc > and disable Faster Data Sync then try. This way uses the generic usb drivers and maybe it will connect.
That did not work...
How do I get my Win7 laptop to see the phone with Android on it?
FarBeyond said:
That did not work...
How do I get my Win7 laptop to see the phone with Android on it?
Click to expand...
Click to collapse
dont think thats working yet
Ya I don't think that works yet, it's tied to Android software drivers and the use of the USB port, since there is no drivers to control the port only to charge battery. Windows thinks there is something there, but the phones USB can't communicate back....I think this is the issue or at lease after playing around with it on my phone anyway
Not that it's a huge amount of help but might troubleshoot down to the hardware level...if you go into bootloader mode on the phone and connect to USB does it connect?
I don't think you should go that deep and dirty. My touch pro 2 works only with only 1 (non-HTC) cable of the 10 i have at home, all are the "standard" mini-USB but only one works flawlessly for communicating/flashing/syncing, the other cables either do the same error - device not recognized - or windows says that the device could communicate faster - and only copies files slowly.
All in all: you should simply check with another USB cable or if you have the factory HTC cable try it with that. I noticed that the cable i am using other than the HTC one is a very good quality thick (low-resistance and double-shielded) USB cable and it never failed on me.
One other thing you should definitely watch for: plug the USB cable into the motherboard USB port directly (on the back of the PC where you plug the keyboard, mouse etc.), sometimes PC cases with front panel USB outputs simply die, or are wrongly attached to the motherboard USB header and it can cause the aforementioned problems too, not to mention if it is wrongly attached it could harm your phone too.
problem need a little help. as i plug phone into computer i get nothing but charge.Look in my computer and shows up but when click on it it says insert card.can put in recovery and usb that way.....also can adb and phone shows up in command..any help why it doesnt give me the option when i plug it into usb port would be great...
If phone is not shown I believe you are missing drivers. Check your device manager and follow this steps http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
Now if you want to access SD card but phone only charge maybe you or someone else clicked "remember this" while selected option "charge only" in past and phone does NOT prompt anymore. What are you trying to do ?
iamcajun said:
problem need a little help. as i plug phone into computer i get nothing but charge.Look in my computer and shows up but when click on it it says insert card.can put in recovery and usb that way.....also can adb and phone shows up in command..any help why it doesnt give me the option when i plug it into usb port would be great...
Click to expand...
Click to collapse
Let me guess.. are you using the cm7 wimax rom....if you are that is a known issue.
Sent from my WiMax infested cm7 Super...Mario...Saiyen...Street Fighter...oh yeah SuperSonic.gginggerbread!!!
No im running myns rls5...Im just trying to get it to connect to computer so it is easier to transfer files from computer to phone
Also don't accidently use autostarts to disable pc synchronize like I did lol.
Sent from my PC36100 using XDA App
iamcajun said:
No im running myns rls5...Im just trying to get it to connect to computer so it is easier to transfer files from computer to phone
Click to expand...
Click to collapse
I love Samba Sharing, works with out drivers and no usb cable required (works over local network - WiFi). If no luck with usb try that. Get it at https://market.android.com/details?id=com.funkyfresh.samba
jacoballen u the man i did do that. went back and turned it on and now working .....thanks alot
Haha that's what happens when you try saving battery power and start turning everything off lol. I so did that and I laugh at myself now.
Sent from my PC36100 using XDA App
Hi all...bare with me here, I posted this earlier, but in the wrong forum section so I am going to start over here.....thanks for your patience....
Hi everyone...I have a problem..I tried to use the Firerat zips to increase my internal storage, and during the flash of the zip file the phone hung and I had to pull the battery out.....since then the usb wont mount.
I am using a Tmobile mytouch slide 3g.
I tried using the sdk and running the fastboot commands etc to get the sd card to mount...no go.
I have tried the fastboot oem enableqxdm 0 command and no go....
Note:..My sd card works fine in a card reader on my computer, I can drag and drop anything to it etc. etc.
Finally i downloaded the stock rom, and i was able to put it on the card, and rename it ESPRIMG.zip and installed it through recovery...My phone was rooted and S-off running ginger, but now back to stock...S-on, and hating the phone now...lol.....
I have been all over the web and I am so confused...everywhere you search there is something different, I just dont know what to do, Windows doesnt recognize the phone when plugged in so I cant load custom rom etc back on....AARGH!!!..I am so frustrated, and have a migraine messing with this damn thing.....lol...
Someone here suggested the MISC is bad and that a binary flash_img would fix it, but honestly, I have no idea what any of that means...all that means to me is confusion, and I have that already.....lol
Can someone please suggest what I may try doing?I am pretty savvy with computers but some of the adb/shell stuff is very confusing to me, I dont like cmd prompts...so maybe a detailed explanation?..
Thank you so much for taking your time to read my problem, I really appreciate it very much.....Dirtylarry
"Kharma...It's a good thing"
ok man im gonna try to understand the problem... you say your usb mount doesnt work but the sdcard works with the adapter, then you went back to stock and un-rooted and the pc doesnt recognize your phone? right?
So it looks to me (just an idea) that the problem is your cable or the port on your pc... just beacuse your sdcard IS working in your phone as well since you used the ESPRIMG.zip(wich was really unnecessary) and you flashed it using the sdcard obviously.
Now you need to find a way to root it again just like you did the first time... dont mess with the drivers since you havent changed them in your pc (i guess) and try this guide....
http://richard.gluga.com/2010/08/complete-guide-to-rooting-and-hacking.html
Now all i can say is ALWAYS DO A NANDROID BACKUP BEFORE MESSING WITH YOUR PHONE. And check the cable/ports... thats the only problem i can think of...
well the fact that I have 3 computers that all used to recoginize the phone just fine is what's weird....none of them do, nor does my usb connection on my car stereo...the computers all say "USb not recognized" etc. etc. and the car stereo says USB N/A .......So i'm just at a loss as to what is going on here....Any ideas????? Thanks much ....Dirtylarry
Try installing PDA Net. It installs USB Drivers and resets the registry. One day it would work, then the next day it didn't work, reinstalling PDA Net worked every time.
Thanks Wave_Sailor, I tried the pda net install but it wont work....Everytime I try it says that it can't handshake to the phone, and then gives me an error code 103, I have tried many many times....also, in the device manager for computer it shows a yellow Exclamation mark everytime I plug the phone in listed at "Other Devices", and says Qualcomm CDMA Technologies MSM....So I googled, and found another thread saying Install Windows mobile 6 center, so I did, and nothing changed.......ARGH....DIrtylarry
Do part III, but while the phone is unplugged, download and install HTC Sync, and then plug the phone back in.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Ok...I did EXACTLY what you have suggested, and in the driver information box this is what I got after the install....
USB Composite device installed successfully
USB Mass Storage Device Failed
Mytouch slide tmobil installed successful
Still a no go on the Mass storage device......hmmm.....so weird of a problem to have....I would have thought that clearing everything on the phone and going back to stock would have done the trick......any more ideas?...Thanks so much for your help.....Dirty
Have you checked in device manager on your computer to see if the mass storage device has a yellow triangle? I just went through the same thing but in reverse. My pc would see the sd card while in my phone but not through the reader. I still haven't gotten it straightened out either, just learned to live with it.
dirtylarry10 said:
Ok...I did EXACTLY what you have suggested, and in the driver information box this is what I got after the install....
USB Composite device installed successfully
USB Mass Storage Device Failed
Mytouch slide tmobil installed successful
Still a no go on the Mass storage device......hmmm.....so weird of a problem to have....I would have thought that clearing everything on the phone and going back to stock would have done the trick......any more ideas?...Thanks so much for your help.....Dirty
Click to expand...
Click to collapse
Make sure you don't have any drivers disabled. Ran into that problem with a different phone. I had one driver disabled so it wouldn't install some of the other drivers.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Ok...just checked,...no drivers disabled in device manager...has to be something wrong with phone...its a/most like the driver is missing from within the phone or something...isn't there some way to get this back to where I could root it and install a custom rom again without the USB to phone connectivity and use my card reader to get some sort of files back onto phone that way?
ok....well I re-did the whole flash process over, and I am now rooted again once more.....I dont know how or why or what...but I am now going strong again.....lol thanks for the help everyone,
ok basically phone wont go into mass storage mode when connected to computer and it isnt recognized by odin or the the computer at all and let me get all these out of the way before im asked
ok first yes driver are installed properly i even installed kies twice and just the drivers from the samsung website to make sure i wasnt messing up somewhere
and then...
i also tried doing a nandroid of blazer rom and getting back to the gingerbread just so my phone would be recognized that also did not work
and then..
i just now bought the mobile odin app and tried flashing the stock eko2 kernel this did not work either
and then...
ive used the original USB cord and the one i bought to day as well as several different computers just to see if the pop up as recognized with show but nothing happens my phone seems like its no longer capable of going into mass storage mode
and then...
moved this here hoping someone has has this issue hopefully you guys can help ill be up all night so feel free to resond whenever thanks guys
make sure your phone is disconnected from the computer and then try going into the settings and in the top section that is wireless and networks press more, then USB utilities, and press connect storage to PC and then plug your phone into the computer. had about the same problem and came across that.
You can also try going into your device settings on your pc (samsung/modem) and resetting the driver it seems to get "stuck" sometimes.
RigorousNinja said:
make sure your phone is disconnected from the computer and then try going into the settings and in the top section that is wireless and networks press more, then USB utilities, and press connect storage to PC and then plug your phone into the computer. had about the same problem and came across that.
Click to expand...
Click to collapse
yea this same method works for me too when the pc doesnt recognize it
I tried the USB utilities but it only popped up with MTP initialization and then MTP connected but when I click connect it tells me remove USB chord
Sent from my SPH-D710 using XDA App
ross4747 said:
I tried the USB utilities but it only popped up with MTP initialization and then MTP connected but when I click connect it tells me remove USB chord
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
mine told me to remove it too. so i had to click connect *before* plugging in the usb cable
ejbmvp said:
mine told me to remove it too. so i had to click connect *before* plugging in the usb cable
Click to expand...
Click to collapse
yea thats what i did and thats when i got the MTP initialization and connected messages but no response from my PC
RigorousNinja said:
make sure your phone is disconnected from the computer and then try going into the settings and in the top section that is wireless and networks press more, then USB utilities, and press connect storage to PC and then plug your phone into the computer. had about the same problem and came across that.
Click to expand...
Click to collapse
+1 to this... its the new way to connect
I put this on my sd card (by taking the card out of the phone) and putting it in a card reader. I flashed the file from the stock recovery and this gave me custom recovery. Then I restored my previous backup. I was having the same issue and FB21 has too many bugs. I went back to gingerbread but kept fb21 modem.
You can actually get MTP working quite simply...
ssconceptz said:
To use USB MTP you have to unmount SD Card first then plug in.
Click to expand...
Click to collapse
Credit goes to ssconceptz for the workaround
neatchee said:
You can actually get MTP working quite simply...
Did this and that got my computer to acknowledge I had connected my phone but not it says unrecognized, so I'm going to uninstall kies and then reinstall again and see if that helps
Credit goes to ssconceptz for the workaround
Click to expand...
Click to collapse
Sent from my SPH-D710 using XDA App
OK that also didn't work I have mobile Odin on my.phone is it possible to use it to go back to stock?
Sent from my SPH-D710 using XDA App
OK I've gotten my PC to know when my phone is connected but no matter how many times install the drivers or uninstall and install kies or use the MTP method you guys talked about it still comes up unrecognized device I tried going into device manager and updating them myself unfortunately that didn't help it kept giving me the code. 10 device is unable to start any ideas?
Sent from my SPH-D710 using XDA App