I will pay for a moto expert - Defy General

To PM me and please help me with my Defy mess.... PLEASE

I'm assuming you are referring to being stuck in your bootloop now? Once I get home I'll write you an entire guide on how to unfubar it.

runeblade said:
I'm assuming you are referring to being stuck in your bootloop now? Once I get home I'll write you an entire guide on how to unfubar it.
Click to expand...
Click to collapse
Lol post it too... I would like to know how to combat bootloop aswell...

The fastest way, assuming that you have an external SD card reader and can put this file on your SD from your computer is the following:
Download This : TMobile Update Thanks to BeachHead for modifying it.
Once downloaded rename it to Update.zip.
Place in root of SDCard.
Hold the volume down button and turn the phone on. Press in the corner to get into the recovery mode. On the options select the update.zip. Let the process begin. The file is modified to not check for things. This will reload all of the firmware as well as the system. After that is done, do a factory reset. Your phone should now boot to 2.2 . If this does not work let me know and I'll do the more involved guide.

runeblade said:
The fastest way, assuming that you have an external SD card reader and can put this file on your SD from your computer is the following:
Download This : TMobile Update Thanks to BeachHead for modifying it.
Once downloaded rename it to Update.zip.
Place in root of SDCard.
Hold the volume down button and turn the phone on. Press in the corner to get into the recovery mode. On the options select the update.zip. Let the process begin. The file is modified to not check for things. This will reload all of the firmware as well as the system. After that is done, do a factory reset. Your phone should now boot to 2.2 . If this does not work let me know and I'll do the more involved guide.
Click to expand...
Click to collapse
I get:
"E:failed to verify whole-file signature
E:signature verification failed
Installation aborted."
Argh - HELP

I flashed the SBF 2.2 BOOT and it booted to the T-Mo screen which is where it is currently stuck. I'll give it a few minutes.

I got where you are at now. Download this SBF and flash it. http://www.multiupload.com/ZZ4TU8W7UQ
Its is the earlier leaked TMobile build. Once you have flashed this root your phone and install clockwork. Let me know when all of that is done. I should be done with dinner by then and can help the rest of the way. You will need the zip file I posted earlier as well as the 2.2 nandroid backup. Leave the Update.zip in the root of your sdcard, and put the nandroid backup in the apkrev folder on the sdcard. Once those are in place, boot into clockworkmod. Wipe system and cache. Then do a restore of the 2.2 Nandroid. Do not reboot yet. Now apply the update.zip. Do not reboot yet. Now do another system wipe. Now reboot the phone. You should be all set to go.

Dude it was actually fine. It loaded up and worked perfectly, I have FroYo and you are the man! Now I have a camera problem.
runeblade said:
I got where you are at now. Download this SBF and flash it. http://www.multiupload.com/ZZ4TU8W7UQ
Its is the earlier leaked TMobile build. Once you have flashed this root your phone and install clockwork. Let me know when all of that is done. I should be done with dinner by then and can help the rest of the way. You will need the zip file I posted earlier as well as the 2.2 nandroid backup. Leave the Update.zip in the root of your sdcard, and put the nandroid backup in the apkrev folder on the sdcard. Once those are in place, boot into clockworkmod. Wipe system and cache. Then do a restore of the 2.2 Nandroid. Do not reboot yet. Now apply the update.zip. Do not reboot yet. Now do another system wipe. Now reboot the phone. You should be all set to go.
Click to expand...
Click to collapse

I would try a reset to fix it. Many have had camera issues and that seems to be the fix.

Nothing.... What were the camera issues others had? I just get black, no matter what.

hah2110 said:
Dude it was actually fine. It loaded up and worked perfectly, I have FroYo and you are the man! Now I have a camera problem.
Click to expand...
Click to collapse
Woooah hold up you got it to load up by flashing what?? You said it was the 2.2 boot sbf? the one I told you to flash earlier?

ketonkss4 said:
Woooah hold up you got it to load up by flashing what?? You said it was the 2.2 boot sbf? the one I told you to flash earlier?
Click to expand...
Click to collapse
YES!!!!!!!!!!

You have to boot the right firmware. I realized that last night. You need to get that update.zip file to run and bring the proper firmware inline with the system image. I was screwing around last night playing with the different combos, and discovered that it wasn't mapping resources right. I lost use of my SD card.

hah2110 said:
YES!!!!!!!!!!
Click to expand...
Click to collapse
Awesome! I think im gonna go ahead and take credit for this one guys lol
And no you dont have to pay me your happy exclamation marks are pay enough!
^^

LOL!
Nice one ketonkss4!
ketonkss4 said:
Awesome! I think im gonna go ahead and take credit for this one guys lol
And no you dont have to pay me your happy exclamation marks are pay enough!
^^
Click to expand...
Click to collapse

Now someone fix my camera
Sent from my Nexus S using Tapatalk

Did you see my post about firmwares......the 2.2SBF is slightly older than the new rom. I suspect mappings have changed...update and see if that fixes it.

runeblade said:
Did you see my post about firmwares......the 2.2SBF is slightly older than the new rom. I suspect mappings have changed...update and see if that fixes it.
Click to expand...
Click to collapse
Ahhh yes that sounds like a legit fix... So he should just go into stock recovery and do the update.zip? well beach-head's update.zip

Yup. See earlier post. LOL

That update.zip from Beach never worked for me and still doesn't.... I don't understand. I still get verification failed.

Related

Root Help, please

alright, so i'm following this supposedly dummy proof guide and i'm still having issues. my tech level is somewhat high so i'm no tard nugget when it comes to these things.
i'm on step 32 here http://androidforums.com/all-things-root-evo-4g/99793-tutorial-idiot-proof-root-guide.html
i cannot get the update.zip to work. when getting to the recovery screen, i see the following
"E:Can't open /cache/recovery/command"
ignoring that and clicking "apply sdcard:update.zip"
i then get the following
"-- Instal from sdcard...
Finding update package...
Opening update package...
Verifying update package...
E:signature verification failed
Installation aborted."
does anyone know what is going on and can possibly help me out? i've already un-mounted/re-mounted my SD card and tried all of those steps again and i'm still getting the same results. thank you!
http://forum.xda-developers.com/forumdisplay.php?f=652
Sporkman said:
http://forum.xda-developers.com/forumdisplay.php?f=652
Click to expand...
Click to collapse
is there a topic there or something i should be looking for? i've googled my exact problems, only to be directed here to xda to threads with different phones and no real fix to this issue. someone usually says "oh i tried it again and it worked", or "oh i re-did it all and it just worked".
i've already done all of that. so again, anyone...please
what Sporkman was trying to get across is that this is the wrong forum to post this question. Go over to the forum Sporkman posted, and ask there.
lzlaxhacker said:
what Sporkman was trying to get across is that this is the wrong forum to post this question. Go over to the forum Sporkman posted, and ask there.
Click to expand...
Click to collapse
thank you for not being quite as vague as first reply.
What's the name of the ROM you're trying to flash? Try selecting flash zip from SD card, then choose zip from SD card, then flash whichever ROM it is you're trying to flash. Make sure you wipe data and dalvik first.
neckface said:
What's the name of the ROM you're trying to flash? Try selecting flash zip from SD card, them choose zip from SD card, then flash whichever ROM it is you're trying to flash. Make sure you wipe data and dalvik first.
Click to expand...
Click to collapse
i'm trying to flash a stock ROM, Supersonic_1.32.651.1_rooted.zip.
after re-doing everything, i went back to ROM manager and this time selecting "fix permissions" worked. i'm now trying to flash clockworkmod recovery and that's not working...so now i'm gonna try it manually again now that the permissions have been fixed supposedly.
the part in bold i didn't get at all lol
what do you mean by zip from SD card?
and yup, it's still not working. same error messages. why is rooting an Android so hard??? i haven't seen one guide that was all step by step ie 1, 2, 3, 4, 5, 6 etc for first timers like myself. even the one i linked isn't a complete step by step.
when i get into recovery mode, this is what i see for options:
-reboot system now
-apply sdcard: update.zip
-wipe data/factory reset
-wipe cache partition
mrvirginia said:
i'm trying to flash a stock ROM, Supersonic_1.32.651.1_rooted.zip.
after re-doing everything, i went back to ROM manager and this time selecting "fix permissions" worked. i'm now trying to flash clockworkmod recovery and that's not working...so now i'm gonna try it manually again now that the permissions have been fixed supposedly.
the part in bold i didn't get at all lol
what do you mean by zip from SD card?
Click to expand...
Click to collapse
Lol Okay, first off if you're using the apply update.zip feature in recovery, its not going to work unless the ROM you're trying to flash is named update.zip. when you go into recovery mode, what version recovery are you running? Is it the one with turquoise letters? Of it is then you're running Koush's clockwork recovery already and there is no need to flash. There should be some options, apply zip from SD card or something like that at the main screen in recovery mode. I'm not too sure, I use Amon RA's recovery. But after you select that you should be given a few options and one of them should choose zip from SD card.
mrvirginia said:
when i get into recovery mode, this is what i see for options:
-reboot system now
-apply sdcard: update.zip
-wipe data/factory reset
-wipe cache partition
Click to expand...
Click to collapse
That's the stock recovery. You haven't successfully flashed a custom recovery yet. Check this post in a sec for an edit, I have a tutorial that's skimmed down. You should be able to run through it quickly since you're almost done with the rooting process.
Okay, so I'm at work and I realize the info I've been giving you is riddled with grammatical errors and what-have-you, so just follow this guide from step 13 down.
http://forum.xda-developers.com/showthread.php?t=711760
neckface said:
Lol Okay, first off if you're using the apply update.zip feature in recovery, its not going to work unless the ROM you're trying to flash is named update.zip. when you go into recovery mode, what version recovery are you running? Is it the one with turquoise letters? Of it is then you're running Koush's clockwork recovery already and there is no need to flash. There should be some options, apply zip from SD card or something like that at the main screen in recovery mode. I'm not too sure, I use Amon RA's recovery. But after you select that you should be given a few options and one of them should choose zip from SD card.
Click to expand...
Click to collapse
the clockwork recovery did not work. i had to manually download that one. and it's called "update.zip". so this is why i'm trying to flash this. i have to flash this first in order to be able to flash other ROMs, or at least that was my understanding.
so, to recap, i tried to do "Flash Clockworkmod Recovery" in the ROM Manager and it kept giving me an error.
i started with unrevoked. it finishes, done, and i get rooted
then i downloaded ROM manager
tried to flash clockworkmod from ROM manager and it says "an error occured while flashing your recovery". no biggie
that's where the "update.zip" comes in. that is the same thing as the clockworkmod, except i'm manually downloading this on a computer and then loading it onto my phone.
then, reboot and go through the steps, and that's when i get the original errors posted in the OP.
edit: just saw your second post. thanks! that looks way freaking easier lol. i'll give it a try and report back. thanks again
after typing in "cat /sdcard/flash_image > /data/flash_image" into the terminal emulator i get "No such file or directory"
mrvirginia said:
after typing in "cat /sdcard/flash_image > /data/flash_image" into the terminal emulator i get "No such file or directory"
Click to expand...
Click to collapse
Okay, go ahead and do the whole tutorial from step one.
neckface said:
Okay, go ahead and do the whole tutorial from step one.
Click to expand...
Click to collapse
if you dont have root yet, i just helped someone that pmd me about helping them root and with ota 4step root it took him about 7 mins and all we did was watch it work, and hes only had his evo for 1week and didnt actually know anything about rooting other than he wanted to flash my finisher rom. I was surprised how simple it really was. follow the easy directions HERE and youre golden lemme know how it goes. I suggest doing some research and deciding which rom you would like to use and then putting it on your sd root directory before you start. Also when it asks you what recovery image to flash i suggest amon-ra because it has NEVER failed me, even back to the hero. I have heard many complaints about the other. toasts is sweet too though. I am not ripping anyone since i cannot even make a recovery image, just letting you know what has been solid since day one for me.
​
neckface said:
Okay, go ahead and do the whole tutorial from step one.
Click to expand...
Click to collapse
yeah i just created that folder since i realized it should've been there and it still didn't work so i'm gonna factory reset, and then start from the very beginning.
neckface said:
Okay, go ahead and do the whole tutorial from step one.
Click to expand...
Click to collapse
dude you are the man! took a while since i had to re-download all the files (was at work before), but it was smooth sailing with that guide! thanks again for your help!
mrvirginia said:
dude you are the man! took a while since i had to re-download all the files (was at work before), but it was smooth sailing with that guide! thanks again for your help!
Click to expand...
Click to collapse
Sweet as, man. So you actually did the process without a computer? Glad you found it helpful.
one more question. anyone know why google earth wouldn't be showing up in the market after root? using titanium and trying to restore, that's the only app that wouldn't restore, too.

rooted....now lost! Please help

I did the root and I have the WiMAX setting and Wifi Tethering is working somewhat but I cant figure out how to flash my rom..I dl'd DamageControl 3.2 but i dont know what to really do now...When i try use ROM Manager I get the error..."an error occurred while attempting to run priviledge commands!" I'm just lost as to what i do now to start using a different rom
Bump.....ANYONE?!
So the following questions would need to be answered:
1) What version of stock were you running before you rooted? (i.e. 1.47, 1.32)
2) What root method did you use?
3) What recovery do you have?
4) If you have wireless tether working than you would need to have installed a custom kernel, which one did you install?
I'm sorry that no one else has tried to assist you in this, however, next time please post this in Q&A as this is for development purposes.
~Jasecloud4
nova0387 said:
I did the root and I have the WiMAX setting and Wifi Tethering is working somewhat but I cant figure out how to flash my rom..I dl'd DamageControl 3.2 but i dont know what to really do now...When i try use ROM Manager I get the error..."an error occurred while attempting to run priviledge commands!" I'm just lost as to what i do now to start using a different rom
Click to expand...
Click to collapse
my personal experience sometimes if your using the rom mangager to flash roms it doesnt always wipe it fully so i use amon recovery all the time now
Im honestly not sure which version i was running b4 I just my Evo about 4 days ago...I used the SimpleRoot 1.47 to root my phone...all went fine for rooting...I didnt install any custom kernal...I pretty new at this so bare with me a bit if you could
and thnx for your time for even replying man!
nova0387 said:
Im honestly not sure which version i was running b4 I just my Evo about 4 days ago...I used the SimpleRoot 1.47 to root my phone...all went fine for rooting...I didnt install any custom kernal...I pretty new at this so bare with me a bit if you could
and thnx for your time for even replying man!
Click to expand...
Click to collapse
i honestly dont know anything about that simple root i have heard that it does work though i rooted in the beginning with toast's method. anyway what happens when you try and get to recovery mode IE powering the the phone off, then holding the volume down button while powering the phone on?
danon.brown said:
i honestly dont know anything about that simple root i have heard that it does work though i rooted in the beginning with toast's method. anyway what happens when you try and get to recovery mode IE powering the the phone off, then holding the volume down button while powering the phone on?
Click to expand...
Click to collapse
Well when i try to go into recover mode it first gives me a black screen that shows a cell phone and a triangle with a exclamation point then i hold the volume up keyand press power and it says "e can't open cache recovery command" n then takes me to a screen where it says
Android system recovery <2e>
use d-pad to highlight; center to select.
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
nova0387 said:
I did the root and I have the WiMAX setting and Wifi Tethering is working somewhat but I cant figure out how to flash my rom..I dl'd DamageControl 3.2 but i dont know what to really do now...When i try use ROM Manager I get the error..."an error occurred while attempting to run priviledge commands!" I'm just lost as to what i do now to start using a different rom
Click to expand...
Click to collapse
Okay during the process of rooting my device, ebo 4g, v1.3x
I ran into the same problem, you have to or I'm sure on this forum just do some research,.....
In RA, dalvik wipe, cache wipe and phone wipe. Then I flashed the rom via sd card, using clockwork custom recovery. If you used Simple root 3 click process you should have clock work.Via step 2.
Rename the Rom to update.zip and place in root sdcard.
Adb reboot recovery
Update.zip from SD card
Finnish do full system wipe and dalvik cache.
Make sure you are nand protected before flashing.
Via step 3
I don't know if this mighhelp just some recent stuff I ran into. Rooted my g1 a WHILE back. Hope these noobietips help lol
Sent from my PC36100 using XDA App
Do this! It's the fastest and easiest way.
Once you get 1.47 and singed sigs then do DC ROM again.
http://forum.xda-developers.com/showthread.php?t=715915
elitekernel said:
Okay during the process of rooting my device, ebo 4g, v1.3x
I ran into the same problem, you have to or I'm sure on this forum just do some research,.....
In RA, dalvik wipe, cache wipe and phone wipe. Then I flashed the rom via sd card, using clockwork custom recovery. If you used Simple root 3 click process you should have clock work.Via step 2.
Rename the Rom to update.zip and place in root sdcard.
Adb reboot recovery
Update.zip from SD card
Finnish do full system wipe and dalvik cache.
Make sure you are nand protected before flashing.
Via step 3
I don't know if this mighhelp just some recent stuff I ran into. Rooted my g1 a WHILE back. Hope these noobietips help lol
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Ok when i go to SimpleRoot and i click extras it says flash recovery...then i can select from Clockwork or RA...I've tried both and they just say flashed successful but nothing different happens...I'm not really sure what ADB reboot recovery is?
stewie-droid said:
Do this! It's the fastest and easiest way.
Once you get 1.47 and singed sigs then do DC ROM again.
http://forum.xda-developers.com/showthread.php?t=715915
Click to expand...
Click to collapse
I ttried that and it works fine until i get to the part about the su file...it doesnt let me go into recovery mode it shows me the black screen with a cell phone and a triangle with an exclamtion point
nova0387 said:
Ok when i go to SimpleRoot and i click extras it says flash recovery...then i can select from Clockwork or RA...I've tried both and they just say flashed successful but nothing different happens...I'm not really sure what ADB reboot recovery is?
Click to expand...
Click to collapse
adb reboot recovery just reboots your phone into recovery mode. once your in that do all the wipes i think its 3 dlvk, data and something else. power off the phone once more then boot to recovery again. now one of the options is flash from zip go there and you should find whatever rom your trying to flash. also you should be putting your zipped rom files in the root directory of your sdcard. on a side not if your on a mac dont download them with safari use firefox or something else
nova0387 said:
Ok when i go to SimpleRoot and i click extras it says flash recovery...then i can select from Clockwork or RA...I've tried both and they just say flashed successful but nothing different happens...I'm not really sure what ADB reboot recovery is?
Click to expand...
Click to collapse
also clockwork and ra are 2 different types of recovery you wont notice anything until u actually reboot the phone into recovery mode
Ok i clicked flash rom on the simple root again and this time it brought up a black and green screen and more options...I selected apply zip from sd card and went down and selected the Damagecontrol zip...it said it installed successfully but now when i go to reboot my phone it keeps reloading the sprint 4g screen and wont boot all the way up!?
nova0387 said:
Ok i clicked flash rom on the simple root again and this time it brought up a black and green screen and more options...I selected apply zip from sd card and went down and selected the Damagecontrol zip...it said it installed successfully but now when i go to reboot my phone it keeps reloading the sprint 4g screen and wont boot all the way up!?
Click to expand...
Click to collapse
you forgot to wipe something common problem.. reboot to recovery again.. go to the wipes part and do all of them.. reboot one last time to recovery then flash DC it should work then
wipe the first 3 if your on RA 1.7.0.1 data/factory, cache, and dalvik.. then reboot into recovery again and flash
nova0387 said:
Ok i clicked flash rom on the simple root again and this time it brought up a black and green screen and more options...I selected apply zip from sd card and went down and selected the Damagecontrol zip...it said it installed successfully but now when i go to reboot my phone it keeps reloading the sprint 4g screen and wont boot all the way up!?
Click to expand...
Click to collapse
nova,
I had the same boot loop issue. My thread for it here:
http://forum.xda-developers.com/showthread.php?t=728955
The issue was that I wasn't totally 100% rooted. By carefully following these directions, I was able to resolve my issue:
http://forum.xda-developers.com/showthread.php?t=721055
I hope this helps also, I did it using the "PC" method. If you have questions regarding those instructions I'd be happy to share my personal experience.
Ok Ok Ok!!! I think I jsut got it my dood! How do i know tho? It booted up and everything just fine and i have wayy more apps including like Dconfig ad superuser permission...is that kinda how i kno?
nova0387 said:
Ok Ok Ok!!! I think I jsut got it my dood! How do i know tho? It booted up and everything just fine and i have wayy more apps including like Dconfig ad superuser permission...is that kinda how i kno?
Click to expand...
Click to collapse
Errr... maybe? Superuser permission, etc. certainly doesn't come with stock. It depends on the ROM you installed. Here's one way to find out...
Go to Settings -> About Phone -> Software Information and check the "Build Number". AFAIK it's impossible to install DamageControl without full root (I tried to myself before fixing my root and going to Fresh 1.0.1) so if that's what you have I'd say you're good.
There may be a better way but that's all I know.
aikeru said:
Errr... maybe? Superuser permission, etc. certainly doesn't come with stock. It depends on the ROM you installed. Here's one way to find out...
Go to Settings -> About Phone -> Software Information and check the "Build Number". AFAIK it's impossible to install DamageControl without full root (I tried to myself before fixing my root and going to Fresh 1.0.1) so if that's what you have I'd say you're good.
There may be a better way but that's all I know.
Click to expand...
Click to collapse
Yep my Build Number says DamageControl v3.2.3! Thnx again everyone who tried to help me and def a special thnx to Danon.Brown! Hollllllla

[Q] is my samsung rootable?

sorry im new to samsung epic but i am knowledgeable with my evo. i just want to make sure before rooting my samsung can be rooted.
here are the specs
2.2.1 froyo
baseband s:d700.0.5.5s.ec05
hardware version d700.0.5
culua said:
sorry im new to samsung epic but i am knowledgeable with my evo. i just want to make sure before rooting my samsung can be rooted.
here are the specs
2.2.1 froyo
baseband s:d700.0.5.5s.ec05
hardware version d700.0.5
Click to expand...
Click to collapse
Ummmm..yeah! That is what these forums are mostly about. For One Click Root for RFS file system look here:
http://forum.xda-developers.com/showthread.php?t=770388
And for converting to the faster EXT4 file system look here:
http://forum.xda-developers.com/showthread.php?t=897612
kennyglass123 said:
Ummmm..yeah! That is what these forums are mostly about. For One Click Root for RFS file system look here:
http://forum.xda-developers.com/showthread.php?t=770388
And for converting to the faster EXT4 file system look here:
http://forum.xda-developers.com/showthread.php?t=897612
Click to expand...
Click to collapse
is this a problem while using cmd one click root said cannot install busybox not enough space. but i have superuser
Delete the asphalt5beta.
063_XOBX said:
Delete the asphalt5beta.
Click to expand...
Click to collapse
This ^ or if you have that HD game demo.
EC05 stock takes up a lot of space. You can also move these apps to the SD card in Settings>applications>manage applications>all scroll down to Asphalt, press it, hit Move to SD card.
so i can still boot regular? after converting to exit4?
culua said:
so i can still boot regular? after converting to exit4?
Click to expand...
Click to collapse
i don't think so. the stock roms are rfs only.
Be sure to put the syndicate rom or another ec05 rom on the phone's sd card before converting to ext4 with clockword mod recovery 3. if you already converted by accident use odin to odin back to ec05 with ext4 and and root precooked in. before you do this back up your data with clockwork or something else if you can still boot into android.
damnit i like the old stock version. i just wanted to root access so im trying to go back to stock.
culua said:
damnit i like the old stock version. i just wanted to root access so im trying to go back to stock.
Click to expand...
Click to collapse
I you want to root and keep the stock rom you can use one of the pre-rooted odin files. This will wipe your phone and take it back to stock rooted EC05 with RFS.
Here are instructions and links to the pre-rooted ec05 odin
Android_Central said:
Thanks to crawrj for answering a question in general that lead me to the source.
1) Download Odin
2) Download and Install Windows Drivers 32bit | 64 bit
3) Download the EC05_DXC.tar.rar
4) Extract the "EC05_DXC.tar.rar" file to a folder on your hard drive to get the necessary "EC05_DXC.tar.md5" file located inside.
5) Shut down your device
6) Boot into download mode (Hold number 1 on physical keyboard and press power)
7) Start Odin
8) Plug in device via USB cable to computer, (if it's done right you should see a yellow Com device light up in one of the rectangular boxes)
9) Place the "EC05_DXC.tar.md5" in the PDA slot on Odin
10) Check Auto Reboot ONLY
12) Click start and this should only take about 2-3 minutes to complete.
13) Wait for the green light in the Com device/rectangular box and the "Pass" to show.
When completed it should reboot into Froyo EC05, with a fresh system.
Click to expand...
Click to collapse
culua said:
damnit i like the old stock version. i just wanted to root access so im trying to go back to stock.
Click to expand...
Click to collapse
If you already put CWM3 on, boot into Clockwork with 3 finger salute and go to backup and restore, restore, and pick the before ext4 conversion file and it will bring you back so you can root with CWM 2.5.x.
thank you, at first i had a really bad headache trying to figure out what i just did and figuring out about Samsung epic and rooting. my evo is much easier when it comes to rooting and trouble shooting. but, thank you you guys make it soo easy to understand better with my epic. and o this isnt my phone is my gf phone she wanted me too root her phone and all the good stuff add.
culua said:
thank you, at first i had a really bad headache trying to figure out what i just did and figuring out about Samsung epic and rooting. my evo is much easier when it comes to rooting and trouble shooting. but, thank you you guys make it soo easy to understand better with my epic. and o this isnt my phone is my gf phone she wanted me too root her phone and all the good stuff add.
Click to expand...
Click to collapse
WOW, good luck with that. I trashed my girl's phone twice and we had to redo the Homescreens. I am an expert at restoring them now. I can't change her launcher because of that. Got her purple messaging app and all. I leave her phone alone now..lol.
kennyglass123 said:
If you already put CWM3 on, boot into Clockwork with 3 finger salute and go to backup and restore, restore, and pick the before ext4 conversion file and it will bring you back so you can root with CWM 2.5.x.
Click to expand...
Click to collapse
restored it in cwm 3+. when done i reboot it and it vibrates and rebooted back to logo and black and vibrates over and over.
sorry for the repost cause of lagg
culua said:
restored it in cwm 3+. when done i reboot it and it vibrates and rebooted back to logo and black and vibrates over and over.
Click to expand...
Click to collapse
OK, do you have a card reader? If so, pull the battery out of the phone, download the EC05 flashable ROM with root from the thread below. Copy it to your sd card. Put the card back in. Boot by holding camera, volume down, and power. Should be orange lettered screen. Scroll down to install zip from sd card, choose that, then choose zip from sd card, then choose the file you just put on and install it.
This should put a prerooted EC05 system on your phone.
well i used the other guy post using odin and the EC05_DXC.tar and works. but the my question here i bootup and install rom manager and flash cwm 2.5.1.0 can i still restore what i had previous backuped?
culua said:
well i used the other guy post using odin and the EC05_DXC.tar and works. but the my question here i bootup and install rom manager and flash cwm 2.5.1.0 can i still restore what i had previous backuped?
Click to expand...
Click to collapse
Don't use ROM manager. It does not work properly on the Epic. Got this from developers here. You should be able to restore your backup if it was made when your system was known good.
well so your saying dont use rom manager to install the recovery?
culua said:
well so your saying dont use rom manager to install the recovery?
Click to expand...
Click to collapse
I wouldn't...lots of problems with different versions of clockwork. But if that is where you made the backup....
You could try using the 3 finger salute to get to clockwork and see if your backup is there then restore it.
right now trying to restore back what i previously had. before my gf gets back from work and before she start yelling at me for deleting all of her apps she download... and i didnt backup any of them lol.

Phone stuck on "Samsung" boot.

My phone will not boot past the SAMSUNG, I just booted in to CWM 3.0.0.6 and id did the EXT4 conversion thing.
gamerfantic said:
My phone will not boot past the SAMSUNG, I just booted in to CWM 3.0.0.6 and id did the EXT4 conversion thing.
Click to expand...
Click to collapse
You are supposed to flash the compatible ROM BEFORE rebooting. Turn off the phone, boot back into CWM with 3 finger and flash the EXT4 compatible ROM.
I never had a ROM on it jut rooted it.
I want the stock stuff just rooted so I can get the wireless tether.
gamerfantic said:
I never had a ROM on it jut rooted it.
I want the stock stuff just rooted so I can get the wireless tether.
Click to expand...
Click to collapse
That was kind of an important part of the OP on CWM 3.0.0.6. You need to pick a ROM that is EXT4 compatible, download it onto your computer, pop the sd card out of your phone, put it in a card reader on your computer and copy the ROM to it and then put it back into the phone and boot with 3 finger salute and choose install zip from sd card and flash the ROM.
Or you can Odin a prerooted EC05 stockish ROM for that.
An upgrade to CWM 3.0.2.5 will fix the problem?
*know how to upgrade from a previous post*
Here is a stock EC05 ROM for EXT4 you can Odin in:
http://forum.xda-developers.com/showthread.php?t=1061912
Odin instructions are here:
http://forum.xda-developers.com/showthread.php?t=1052813
Yhe important thing is not to panic. We will fix this.
There are also videos on how to's here:
http://forum.xda-developers.com/showthread.php?t=1009997
Yah, rather not re odin as I just did from a bad rom so I had decided to stay stock except for root, will CMW 3.0.2.5 fix my problem?
gamerfantic said:
An upgrade to CWM 3.0.2.5 will fix the problem?
*know how to upgrade from a previous post*
Click to expand...
Click to collapse
Yes, this may work. You are just having that kind of day, huh? Do you have access to a card reader on your computer?
I thought we had you all set with CWM 3.0.2.5? How did you end up with CWM 3.0.0.6?
Thats what I said! Idk how I got there let me put it on. Give me about 10 minutes.
gamerfantic said:
Thats what I said! Idk how I got there let me put it on. Give me about 10 minutes.
Click to expand...
Click to collapse
I must be hungry...I just thought of something. Go into CWM and go to restore. There is a file there which says beforeEXT4 or something like that. Restore that and then put the other CWM 3.0.2.5 on and you should be good.
It wont let me do that.
Says no files found etc.
gamerfantic said:
It wont let me do that.
Says no files found etc.
Click to expand...
Click to collapse
Is your sd card still in your phone? The conversion to EXT4 makes a backup on your sd card.
Yup i saw cwm saying it was creating a backup
when i go to clockworkmods/backup/
its there but says when i try to flash it as .zip no files found.
gamerfantic said:
Yup i saw cwm saying it was creating a backup
when i go to clockworkmods/backup/
its there but says when i try to flash it as .zip no files found.
Click to expand...
Click to collapse
Not flash...restore. Go to backup and restore, restore then pick that file.
Oh ok =D one moment!
Edit:
Got the error while flashing boot image.
gamerfantic said:
Oh ok =D one moment!
Edit:
Got the error while flashing boot image.
Click to expand...
Click to collapse
Arghhh! Try a second time. Otherwise just Odin a prerooted EC05 and be done with it.
I lose all my apps?
gamerfantic said:
I lose all my apps?
Click to expand...
Click to collapse
Yes, right now you don't have them at all. When you log into the Market and your gmail, your apps will eventually show up and you will be able to download them again.

How to root and install custom rom?

I'm a beginner, i recently asked how to install the ics leak, apparently it's seem easy, one click but i was advise to root and install cwm...
so what exactly is CWM?
can anyone give me the following guides? with the most dumbed down instruction? (like button to press, where to activate things etc.)
How to root lg android?
brief explanation of what is cwm
how to install custom rom?
- while you explain, can you explain the concept of the phone? like recovery mode does this, debugging does that.
I used to be a iphone pro, but android, i'm a noob xD .
To root, download superoneclick v2.3.2 on your computer. NOT 2.3.3 as it doesn't work. Launch it and click root. If it doesn't work the first time, keep trying. It'll work eventually. Clockwork mod is a recovery mode. In your android You download rom manager in the play store, then click on it. Click flash clockwork mod recovery inside the app. It'll give u a list of devices. Select att nitro HD. Then download ho!no!s cwm flash able leak, (its in the android development section. Download that and go back to rom manager. REMEMBER YOU DO ALL THIS IN YOUR ANDROID XCEPT FOR ROOTING WITH SUPERONECLICK. Click reboot into recovery. Click on backup and restore. Click backup in that. Wait till its done. Then go back to the main menu in cwm. Click wipe data/factory reset. Then click yes. Then when its done go and click advanced. Click wipe dalvik cache. Click yes. Then press the back button. Then go to install zip from sdcard. Click choose zip from sdcard. Then click Download.locate the zip you downloaded earlier, it should be in there. Click yes. When its done, go back to the main menu and click reboot system now. Voila, you're done. Phew this took a while.
Sent from my GT-I9300
awesome made it pretty clear xD. btw, let me make it into list so i can see which i'm not as quite clear,
1. Install superoneclick v2.3.2 precise. (did this on my skyrocket, but i'm just afraid diff android system have different way)
2. Download ROM manager, and flash clockwork mod within the app (okay, is the CWM is inside the app? or do i download it external, if so where)
3. Download Ho!no!s cwm, umh link please? xD and do i download it straight on the phone? or do I put dl it on pc, n put it on phone, if so, what is the directory i should put it in.
4. in rom manager, go to recovery (reboot)
5. click backup and restore - then back up
6. then go back out and click wipe data/factory reset-yes
7. click advanced
8. wipe dalvik cache -yes
9. then back button
10. then go to install zip from sd card (which .zip file?)
11. go back out and reboot system.
plz spend sometime and help me thank you
yes that does took a while.
rani9990 said:
To root, download superoneclick v2.3.2 on your computer. NOT 2.3.3 as it doesn't work. Launch it and click root. If it doesn't work the first time, keep trying. It'll work eventually. Clockwork mod is a recovery mode. In your android You download rom manager in the play store, then click on it. Click flash clockwork mod recovery inside the app. It'll give u a list of devices. Select att nitro HD. Then download ho!no!s cwm flash able leak, (its in the android development section. Download that and go back to rom manager. REMEMBER YOU DO ALL THIS IN YOUR ANDROID XCEPT FOR ROOTING WITH SUPERONECLICK. Click reboot into recovery. Click on backup and restore. Click backup in that. Wait till its done. Then go back to the main menu in cwm. Click wipe data/factory reset. Then click yes. Then when its done go and click advanced. Click wipe dalvik cache. Click yes. Then press the back button. Then go to install zip from sdcard. Click choose zip from sdcard. Then click Download.locate the zip you downloaded earlier, it should be in there. Click yes. When its done, go back to the main menu and click reboot system now. Voila, you're done. Phew this took a while.
Sent from my GT-I9300
Click to expand...
Click to collapse
dustin4vn said:
awesome made it pretty clear xD. btw, let me make it into list so i can see which i'm not as quite clear,
1. Install superoneclick v2.3.2 precise. (did this on my skyrocket, but i'm just afraid diff android system have different way)
2. Download ROM manager, and flash clockwork mod within the app (okay, is the CWM is inside the app? or do i download it external, if so where) Yes CWM recovery is in ROM Manager
3. Download Ho!no!s cwm, umh link please? xD and do i download it straight on the phone? or do I put dl it on pc, n put it on phone, if so, what is the directory i should put it in. Found here - http://forum.xda-developers.com/showthread.php?t=1684032
Yes, I would follow that link on your phone so that you can download the zip directly to your phone.
4. in rom manager, go to recovery (reboot)
5. click backup and restore - then back up
6. then go back out and click wipe data/factory reset-yes
7. click advanced
8. wipe dalvik cache -yes
9. then back button
10. then go to install zip from sd card (which .zip file?) The HO!NO! rom file you downloaded in step 3
11. go back out and reboot system.
plz spend sometime and help me thank you
yes that does took a while.
Click to expand...
Click to collapse
Make sure you know where your .zip file is downloaded. You'll need to know where to find it while you're in CWM looking to "install .zip from SD card".
I'm still a noob as well. I've only flashed one rom so far, but I hope I've steered you in the right direction. My suggestions are what worked for me with my rom so you should be fine. If anyone sees errors in my advice please post so that we will all know.
well awesome man! thank you for making it bold and everything, really helpful. pretty much got everything sorted out now. the concept is pretty easy xD Much less hassle than iphone. btw, after flashing the cwm... how do you flash custom rom? xD lol. and which rom do you recommend? hono full throttle? seem like it got pretty good reviews.
AllstarE4 said:
Make sure you know where your .zip file is downloaded. You'll need to know where to find it while you're in CWM looking to "install .zip from SD card".
I'm still a noob as well. I've only flashed one rom so far, but I hope I've steered you in the right direction. My suggestions are what worked for me with my rom so you should be fine. If anyone sees errors in my advice please post so that we will all know.
Click to expand...
Click to collapse
dustin4vn said:
well awesome man! thank you for making it bold and everything, really helpful. pretty much got everything sorted out now. the concept is pretty easy xD Much less hassle than iphone. btw, after flashing the cwm... how do you flash custom rom? xD lol. and which rom do you recommend? hono full throttle? seem like it got pretty good reviews.
Click to expand...
Click to collapse
Well I don't know if it's called "flashing" for CWM. It's more installing CWM with the ROM Manager app. Then once you've backed up your stock setup you can "flash" whichever rom zip you want to use.
I'm using CM9 RC1 because it had reviews of it being stable with everything working. I'm so new to this that I am hesitant to try all of the other roms that have bugs. I'll try one eventually though.
Hopefully you get a custom rom running today. :good:
the 1st thing you need to do is learn to use the search function. there's about 50+ threads on all of this, there's a repository of everything as well.
I'm rly starting to think we are doomed as people when every ****ng newb here has to start the same ****ing thread.
jesus christ, take some responsibility, this nitro is my 1st smartphone and i figured out how to use this forum to do the **** you are asking months ago.
stop acting helpless.
Somebody had a bad day.....
Sent from my GT-I9300
rani9990 said:
Somebody had a bad day.....
Sent from my GT-I9300
Click to expand...
Click to collapse
that very well may be, nevertheless, the frequency, redundancy & level of helplessness in these threads is sad.
rani9990 said:
Somebody had a bad day.....
Sent from my GT-I9300
Click to expand...
Click to collapse
Rani9990, are you located in Fremont California? if so do you do this kind of stuff for some cash
I would, but I'm in Hyderabad, India on vacation. Be back august 29.
Sent from my GT-I9300
dustin4vn said:
awesome made it pretty clear xD. btw, let me make it into list so i can see which i'm not as quite clear,
1. Install superoneclick v2.3.2 precise. (did this on my skyrocket, but i'm just afraid diff android system have different way)
2. Download ROM manager, and flash clockwork mod within the app (okay, is the CWM is inside the app? or do i download it external, if so where)
3. Download Ho!no!s cwm, umh link please? xD and do i download it straight on the phone? or do I put dl it on pc, n put it on phone, if so, what is the directory i should put it in.
4. in rom manager, go to recovery (reboot)
5. click backup and restore - then back up
6. then go back out and click wipe data/factory reset-yes
7. click advanced
8. wipe dalvik cache -yes
9. then back button
10. then go to install zip from sd card (which .zip file?)
11. go back out and reboot system.
plz spend sometime and help me thank you
yes that does took a while.
Click to expand...
Click to collapse
I am new to this too and i followed that at least 20 times now and Super click just stops. Can anyone help?
SuperOneClick has been known to take several attempts to complete. From everything I've read just keep trying. Some guys have had to try 20 to 30 times to get it done successfully. It sounds like a pain, but it's worth it.
So super one click may still work with the updated NITRO?
Sent from my LG-P930 using xda app-developers app
thedicarlos said:
So super one click may still work with the updated NITRO?
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
Which one? v10j, or v11a? I heard 11a is rootable but 10j is NOT.
AllstarE4 said:
SuperOneClick has been known to take several attempts to complete. From everything I've read just keep trying. Some guys have had to try 20 to 30 times to get it done successfully. It sounds like a pain, but it's worth it.
Click to expand...
Click to collapse
Alright I got it rooted. Now what is a good noob friendly rom? Right now I am using CyanogenMod 9 RC2 but I dont like the fact that you cant put it in usb mass storage mode. Is there any way to fix that? and the fact that you have to install the play store.
Pokjbv said:
Alright I got it rooted. Now what is a good noob friendly rom? Right now I am using CyanogenMod 9 RC2 but I dont like the fact that you cant put it in usb mass storage mode. Is there any way to fix that? and the fact that you have to install the play store.
Click to expand...
Click to collapse
Yes, follow the instructions here: http://forum.xda-developers.com/showthread.php?t=1671050
You only have to do this once for each computer you want to use USB mass storage on. It still sucks if you want to use it for USB mass storage on other computers, but if you only use it on one or two computers it's fine.

Categories

Resources