Develop Bugs

Need a Guide to get from stock GB to CM10

I have a stock glide on gingerbread and want to test out the CM10 in the development section.
If anyone could help with a step by step guide it would really be appreciated. I know there are
other posts which describe each part but I am having trouble find them. Thank You.

EGGrollBEAST said:
I have a stock glide on gingerbread and want to test out the CM10 in the development section.
If anyone could help with a step by step guide it would really be appreciated. I know there are
other posts which describe each part but I am having trouble find them. Thank You.
Click to expand...
Click to collapse
Odin stock ics leak
Odin CWM recovery
wipe data
wipe cache
wipe dalvik cache
format data
format cache
format system
choose zip and flash
Flash Gapps!
from http://forum.xda-developers.com/showthread.php?t=1940677 OP

Thank you for your reply. I am a total noob. how do I use Odin??
Sent from my SAMSUNG-SGH-I927 using xda app-developers app

BEFORE YOU START. I AM NOT RESPONSIBLE FOR ANY DAMAGE OR DATA LOSS ANY OF THESE STEPS MAY CAUSE. ALWAYS FLASH AT YOUR OWN RISK.
Note: Suggestions, comments & questions are welcome. Will improve as much as needed.
1. BACKUP. There are many apps you can find to backup any data. Backup all data you'll want to keep until you're 100% satisfied then move it to a folder on your PC. Personally, I use Titanium Backup Pro and backup everything to Google Drive.
2. DOWNLOAD. A GB kernel, rooted AT&T ROM/Rogers ROM, stock ICS leak, CWM, and then go to the CM10 thread and grab the latest build of the ROM & Gapps. So you should have 6 files total. To make your life easier, put them all in 1 folder.
3. ROOT. Turn off your phone. Hold the top part of the volume rocker and turn on the phone. It should boot into download mode if done correctly. Connect phone to PC via USB. On your PC, install & open Odin. Click on PDA and locate your GB kernel. Then click start & wait. If successful, you should see green and you'll be rooted. I believe whenever you use ODIN, it is called a 'flash.' I hope someone will correct me if I'm wrong. Anyway, go back into download mode and now place the rooted ROM in the PDA section followed by clicking start again. When the phone is done booting, go to the Play store and get Superuser app. This allows you to give permission to operations that require root. Make sure it is updated!
4. CLEAN. Now you'll want to wipe your phone to minimize the chances of anything going wrong. Instead of holding the top part of the volume rocker, you'll hold the bottom. Then hold it as you start the phone. This is the stock recovery menu. I don't remember precisely what the options are called but you will want to wipe cache, dalvik, data and system.
5. UPDATE OS. Time to open up that stock ICS leak. When open, it should appear similar to Odin. Make sure your phone is in download mode again, connected via USB and click start again. You'll notice that your phone might take a while to boot up. It'll be updating files and apps so be patient.
6. CWMR. After it's all booted up, time to go back to download mode again. In ODIN, you'll want to click on PDA again and this time flash the CWMR file. Click start and you're done in no time.
7. CLEAN AGAIN. Now you'll want to turn off your phone and boot the phone holding the bottom of the rocker. You'll boot into CWMR. Time to wipe and format again. You'll find the first 2 wipe options on the first page. The wiping of dalvik cache will be in the ADVANCED menu. Then you'll want to go into the MOUNTS AND STORAGE menu. Format system, cache & data.
8. CM10. Now while still in CWMR, you'll need to go into the MOUNTS AND STORAGE menu and select MOUNT USB STORAGE. You'll want to connect your phone to your PC with the USB. Place the CM10 and Gapps files in the main directory of your PHONE'S INTERNAL STORAGE. Select UNMOUNT on your phone, disconnect from USB and now you'll want to go to the option INSTALL ZIP FROM SDCARD.. then go to the CHOOSE.. option and select the final fruit of your labor, CM10. When it's done doing it's thing, REBOOT SYSTEM. Be patient and let everything load.
9. GAPPS. After everything has loaded, you want to turn off the phone and boot into CWMR one last time. Go to INSTALL ZIP FROM SDCARD, CHOOSE ZIP and flash that Gapps file. Then REBOOT SYSTEM.
10. RESTORE. Reinstall the app you used to backup your stuff, move your backup files you put on the PC back to it's rightful place and restore. You should be good to go.

rogernizzLe said:
BEFORE YOU START. I AM NOT RESPONSIBLE FOR ANY DAMAGE OR DATA LOSS ANY OF THESE STEPS MAY CAUSE. ALWAYS FLASH AT YOUR OWN RISK.[/SIZE]
If any of the more experienced people find errors in this "guide", please let me know.
1. BACKUP.
.
.
.
Click to expand...
Click to collapse
Thank you for doing this!
Just checking - is there not a thread / guide for this elsewhere already? (Or am I confusing versions - not for the first time, with xda-developers!)
Suggestions:
- move this to the start of a new thread where you can reserve the first 3 posts, you can update/edit it, etc.
1. BACKUP:
- it would be useful to mention CWMR backup. (i.e. Botch it, restore the image, try again.)
- I like not leaving people hanging and at least mentioning TB as you have so they have a search path to follow. It would be worth mentioning that TB Free will be 'good enough' to keep them safe (one time) through this process. [But long term / good app / scheduling makes TB Pro worthwhile.]
- Making TB and CWMR a link would be useful, and not just a link to the 'product' page, but link to a thread that describes how to do so. 'Product' links will be contained within them. It's all very well to get a link to what a beastie is, but frequently knowing what it is, and how to put it into practice are two different things. Linking to a thread of the latter type would be the useful one.
3. ROOT
- one of the problems when talking about ODIN is the perception left that it is a single thing. So saying 'ODIN (PC)' would be useful here. Whether you point out that it talks to the ODIN (client?) already built in to the PDA is up to you.
4. UPDATE OS:
- don't you want to be talking about the alpha/beta dudejb version here?
5. CWMR
- wouldn't you want to do this first? See Backup comments, above.
- is this even necessary? It's a VERY GOOD IDEA, but is CWMR needed to run the phone 'stock' (CM10)?
7. CM10
- links / explanations are going to be useful here.
- e.g. There's a lot of talk of subsequent steps, such as backlight fix. You might want to note such is already built in, or not. (As people read they come across these additional fixes, and it's not always apparent that months later someone built the fixes in already. It's easy to go in circles trying to get a coherent, whole, current, view of the world.)
SD Card management - first you TB Backup, then you wipe the SD Card (or so a quick glance appears). I know you haven't actually said that, but some explicit clarity may be helpful.

Thanks for the suggestions and good question. I don't think there are any guides out there.. but this is just from how I did it. Tried to make it as simple as I could without adding branching steps. Also, it's very narrow because I can only speak on behalf of the what worked for me. If there's a big need for this to be in a thread of it's own, I'll gladly make one.
-I didn't mention CWMR backup for two reasons. I didn't use it and I don't rely on it. Perhaps I should mention it anyway though regardless.
-Never used dudejb's version so I didn't list it.
-Needed CWMR at that point to install CM10 & Gapps zips. I think you can also use Odin but doing it via CWMR gives him a chance to familiarize himself with what he'll be using to flash future versions.
-Didn't put links to CM10 since he already knows where it is and can most likely read the fixes & not-fixed list himself.

Thanks RogerNIZZLE I appreciate the guide and I believe a lot of other ppl will too.
There is one hiccups i'm coming across. After I wipe, data, cache, dalvik cache,
I **format data, format cache, format system** then when it reboot and it just stays at the
start up screen that shows SAMSUNG. I let it sit for 5 but nothing happens, its still
on SAMSUNG. I've repeated the steps a few times? Is there any suggestions on what I can do?

Hm. Do steps 4, 5, 7, 8, 9. Sorry! All hope is not lost.

rogernizzLe said:
Hm. Do steps 4, 5, 7, 8, 9. Sorry! All hope is not lost.
Click to expand...
Click to collapse
Do steps 4,5 and then copy the cm10 and gapps to you phone internal memory. Then follow step 6. Lastly install cm10 and gapps together and reboot you phone.
Sent from my SGH-I927

@roger:
You should start a thread, and I'll request to get it stickied. This could help a lot of new users.
One thing I would add - before flashing ICS, wipe system data cache dalvik (either with stock recovery or cwmr). Then boot into download and flash ICS.

Okie dokie, I will do this after work.

EGGrollBEAST said:
I have a stock glide on gingerbread and want to test out the CM10 in the development section.
If anyone could help with a step by step guide it would really be appreciated. I know there are
other posts which describe each part but I am having trouble find them. Thank You.
Click to expand...
Click to collapse
i suppose u already know that you need a rooted phone before rom flashing is possible. what i did was to flash ics leak using clockwork recovery and then cm10.

IS ANYBODY AWARE THAT THERE IS NO OFFICIAL CM10 NIGHTLY ON GET.CM??? Please stop telling people to look there!

bs27975 said:
Thank you for doing this!
4. UPDATE OS:
- don't you want to be talking about the alpha/beta dudejb version here?
Click to expand...
Click to collapse
How did I get a version? Not sure what is meant by that?
JB

C3LLxM8 said:
IS ANYBODY AWARE THAT THERE IS NO OFFICIAL CM10 NIGHTLY ON GET.CM??? Please stop telling people to look there!
Click to expand...
Click to collapse
Did you know you don't have to tell at us... once you learn that. I'd like to say there won't be an official cm10 because the official cm secs think our phone runs on different hardware than it actually does and thinks they can get the phys. keyboard working. You should thank dman for even getting cm9 and beta cm10 where they are.
Sent from my SGH-I927 using xda app-developers app

Rawr0w0 said:
Did you know you don't have to tell at us... once you learn that. I'd like to say there won't be an official cm10 because the official cm secs think our phone runs on different hardware than it actually does and thinks they can get the phys. keyboard working. You should thank dman for even getting cm9 and beta cm10 where they are.
Sent from my SGH-I927 using xda app-developers app
Click to expand...
Click to collapse
Yes dman should be thanked, so hard his thanks gland fails.
Official CyanogenMod is not being made because -we- have different hardware than the other SGSII range of phones.
So yeah. No use pointing at get.cm
In other news, these instructions, amazing.
Sent from my SGH-I927 using xda premium

I take to credit for the work on the various links i'll post. (I WONT BE HELD RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE)
1. In order to get CM10, first get instructions on rooting(if you have root,SKIP) via http://forum.xda-developers.com/showthread.php?t=1378082
2. When you have gotten root, flash CWMR via http://forum.xda-developers.com/showthread.php?t=1458153 or http://forum.xda-developers.com/showthread.php?t=2007198
(MAKE SURE YOU DO A NANDROID BACKUP AFTER YOU SUCCESSFULLY FLASH CWMR)
3. Next step is to flash ICS leak UCLG9 via http://forum.xda-developers.com/showthread.php?t=1841502 (could not find thread for CWM flashable UCLJ3)
4. Once you are now on UCLG9, you can now flash CM10 by Dman.
If i helped, please hit thanks.
Sent from my super SGH I927(Flashed almost all custom Roms). Currently on Dmans CWM flashable UCLJ3
I maybe JM but really XPerienced.

[HOWTO] Install CM10 from Stock for Captivate Glide

BEFORE YOU START. I AM NOT RESPONSIBLE FOR ANY DAMAGE OR DATA LOSS ANY OF THESE STEPS MAY CAUSE. ALWAYS FLASH AT YOUR OWN RISK.
Note: Suggestions, comments & questions are welcome. Will improve as much as needed.
1. BACKUP. There are many apps you can find to backup any data. Backup all data you'll want to keep until you're 100% satisfied then move it to a folder on your PC. Personally, I use Titanium Backup Pro and backup everything to Google Drive.
2. DOWNLOAD. A GB kernel, rooted AT&T ROM/Rogers ROM, stock ICS leak, CWM, and then go to the CM10 thread and grab the latest build of the ROM & Gapps. So you should have 6 files total. To make your life easier, put them all in 1 folder.
3. ROOT. Turn off your phone. Hold the top part of the volume rocker and turn on the phone. It should boot into download mode if done correctly. Connect phone to PC via USB. On your PC, install & open Odin. Click on PDA and locate your GB kernel. Then click start & wait. If successful, you should see green and you'll be rooted. I believe whenever you use ODIN, it is called a 'flash.' I hope someone will correct me if I'm wrong. Anyway, go back into download mode and now place the rooted ROM in the PDA section followed by clicking start again. When the phone is done booting, go to the Play store and get Superuser app. This allows you to give permission to operations that require root. Make sure it is updated!
4. CLEAN. Now you'll want to wipe your phone to minimize the chances of anything going wrong. Instead of holding the top part of the volume rocker, you'll hold the bottom. Then hold it as you start the phone. This is the stock recovery menu. I don't remember precisely what the options are called but you will want to wipe cache, dalvik, data and system.
5. UPDATE OS. Time to open up that stock ICS leak. When open, it should appear similar to Odin. Make sure your phone is in download mode again, connected via USB and click start again. You'll notice that your phone might take a while to boot up. It'll be updating files and apps so be patient.
6. CWMR. After it's all booted up, time to go back to download mode again. In ODIN, you'll want to click on PDA again and this time flash the CWMR file. Click start and you're done in no time. CWMR replaces stock recovery with the same options plus extra goodies.
7. CLEAN AGAIN. Now you'll want to turn off your phone and boot the phone holding the bottom of the rocker. You'll boot into CWMR. Time to wipe and format again. You'll find the first 2 wipe options on the first page. The wiping of dalvik cache will be in the ADVANCED menu. Then you'll want to go into the MOUNTS AND STORAGE menu. Format system, cache & data.
8. CM10. Now while still in CWMR, you'll need to go into the MOUNTS AND STORAGE menu and select MOUNT USB STORAGE. You'll want to connect your phone to your PC with the USB. Place the CM10 and Gapps files in the main directory of your PHONE'S INTERNAL STORAGE. Select UNMOUNT on your phone, disconnect from USB and now you'll want to go to the option INSTALL ZIP FROM SDCARD.. then go to the CHOOSE.. option and select the final fruit of your labor, CM10. When it's done doing it's thing, REBOOT SYSTEM. Be patient and let everything load.
9. GAPPS. After everything has loaded, you want to turn off the phone and boot into CWMR one last time. Go to INSTALL ZIP FROM SDCARD, CHOOSE ZIP and flash that Gapps file. Then REBOOT SYSTEM.
10. RESTORE. Reinstall the app you used to backup your stuff, move your backup files you put on the PC back to it's rightful place and restore. You should be good to go.
Credits in no special order:
dman3285 (CM10)
CarpeNoctem (Root Guide)
ardatdat (Kernel)
designgears (Stock ICS Leak)
utkanos (CWMR 5.0.2.7)

Someone said doing this is a good idea so..

rogernizzLe said:
Someone said doing this is a good idea so..
Click to expand...
Click to collapse
You've made the same mistake as in your previous post. Step 6 for cleaning up the phone should be after you copy the cm10 and gapps to internal storage or otherwise from cwmr you'll have to mount storage and then copy the files from your comp. If you format system then you won't be able to boot at all.
And after the copy you can do all the format and cleaning and install cm10 and then gapps together and reboot finally.
This guide would be a good help to the new users. Hopefully you can incorporate the changes to correct it.
Sent from my SGH-I927

ninthsense said:
You've made the same mistake as in your previous post. Step 6 for cleaning up the phone should be after you copy the cm10 and gapps to internal storage or otherwise from cwmr you'll have to mount storage and then copy the files from your comp. If you format system then you won't be able to boot at all.
And after the copy you can do all the format and cleaning and install cm10 and then gapps together and reboot finally.
This guide would be a good help to the new users. Hopefully you can incorporate the changes to correct it.
Sent from my SGH-I927
Click to expand...
Click to collapse
Sorry, really wanted to play AC3. Fix'd the cleaning stage. I realized I actually did mount the storage. Looks okay, I hope?

Hey, I followed these steps and it worked.
Didn't run into any major problems, except for having to download the CM10 file using my phone itself, I couldn't download it from my computer (found this out in the CM10 post, pg 29).
It really helps to follow OPs instructions, but also read up on all of the individual threads he links to before actually doing anything.
Thanks rogernizzLe!

Glad it helped. Enjoy!

So all the features of the phone works? Physical keyboard, 3G, GPS, WiFi?

Do you have to use the 1 click?
I have ICS installed via CLock work Mod and Have the Lite Kernel.
Should I not just be able to install JB from Clock work mod? I have never used the 1 click installer but I am on ICS with an ICS Kernel.
Waiting for everything to work before I flash JB. Heard there were still issues with the camera.

r0bot said:
So all the features of the phone works? Physical keyboard, 3G, GPS, WiFi?
Click to expand...
Click to collapse
For a list of what works in the CM10 ROM, check it's thread's OP. dman updates it as bugs are being fixed/found.
dudejb said:
Do you have to use the 1 click?
I have ICS installed via CLock work Mod and Have the Lite Kernel.
Should I not just be able to install JB from Clock work mod? I have never used the 1 click installer but I am on ICS with an ICS Kernel.
Waiting for everything to work before I flash JB. Heard there were still issues with the camera.
Click to expand...
Click to collapse
The method is how I got to JB. There's probably other ways but this worked for me. And yes, currently camera doesn't work.

If I may suggest ... some post updates would be useful ...
Post #1:
rogernizzLe said:
... and then go to the CM10 thread ...
Click to expand...
Click to collapse
- could you update with a link to the thread? (There are so many!)
Post #2:
rogernizzLe said:
Someone said doing this is a good idea so..
Click to expand...
Click to collapse
- didn't and don't understand this at the time.
- perhaps a "(reserving a message slot)" in the middle would clarify.
- my guess was, this post was saying doing the things in post 1 was a good idea.
- only later did I realize you were probably referring to the reservation of the message slot.
Post #9:
rogernizzLe said:
... For a list of what works in the CM10 ROM, check it's thread's OP. dman updates it as bugs are being fixed/found. ...
Click to expand...
Click to collapse
- a link to the thread you mean, for later readers, would also be useful here.

thx so much
it's really helpful for a fisher like me

[Q] How to go from 4.0.3 Jedi Mind Trick to Cyanogenmod 10.0.0 Stable Release

Hello all just bought a new Samsung Galaxy SII from craigslist already rooted with 4.0.3 Jedi Mind Trick. After reading for what seems 4-5 hours i have been trying to put together how to properly without bricking switching it to 10.0.0 Stable as i use to use Cyanogenmod 2-3 years ago on my devices. Seem alot of things have changed and there is a cluster**** of stuff out there now. If you could direct me to a how to or show me how to do it i would greatly appreciate it!
Thanks all!

Assuming you have nothing personal to back up that you can't just download from google play or your google account again: download cyanogen 10 and it's gapps. reboot into recovery mode. factory reset, wipe data, wipe system, wipe cache, wipe dalvik. pick the install zip from sd card or so option, browse to cyanogen, then install gapps the same way. wipe dalvik again and reboot.

I was thinking of doing this myself JMT to CM10. I didn't think there was anything special to do same as flashing from any other ROM to CM10. If there is a special requirement I would think they'd post in in with the ROM post information.

Alawishis said:
I was thinking of doing this myself JMT to CM10. I didn't think there was anything special to do same as flashing from any other ROM to CM10. If there is a special requirement I would think they'd post in in with the ROM post information.
Click to expand...
Click to collapse
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?

melvinator said:
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?
Click to expand...
Click to collapse
honestly - i backed up everything to my external and then formatted the internal when i went from TW to AOSP for the last time. well worth it. nice folder clean up and then you can just manually take all the stuff you want back.
and you should just be able to odin on cwm or twrp - then flash the rom of your choice.

new ion? said:
honestly - i backed up everything to my external and then formatted the internal when i went from TW to AOSP for the last time. well worth it. nice folder clean up and then you can just manually take all the stuff you want back.
and you should just be able to odin on cwm or twrp - then flash the rom of your choice.
Click to expand...
Click to collapse
trying to look up how to do that now .... Searching the forum now... Might you be able to tell me real quick how? I already Downloaded the 5.2 file they suggest to use but can't find a working toturial that is just for flashing the cwm.

melvinator said:
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?
Click to expand...
Click to collapse
If you get stuck at the boot logo, it's called a soft brick. You don't have to use ODIN or go back to ICS. Just make sure the ROM zip you downloaded isn't corrupt (check the size/m5d if possible), wipe everything, and reboot into recovery to try installing again.

arcsine said:
If you get stuck at the boot logo, it's called a soft brick. You don't have to use ODIN or go back to ICS. Just make sure the ROM zip you downloaded isn't corrupt (check the size/m5d if possible), wipe everything, and reboot into recovery to try installing again.
Click to expand...
Click to collapse
I already used Odin to go back to 2.3.5
Btw I appreciate the help
My woman's is waiting that I fail to say I told you so -_-

melvinator said:
I already used Odin to go back to 2.3.5
Btw I appreciate the help
My woman's is waiting that I fail to say I told you so -_-
Click to expand...
Click to collapse
You won't fail. Follow the guidelines step by step. Print it out, make notes. Anything. Read. The step by step guide works... that'll get you with cwm. Then, you can flash the zip you will put on your phone... either a SU zip or just a rooted ROM. Follow flashing instructions.
Just realized - you'll be way better off if, once you have cwm on, just format the internal ONCE YOU HAVE A ROM ON AN EXTERNAL SD CARD. then flash CM10. THEN you'll have a fresh AOSP install.
Sent from my SAMSUNG-SGH-T989 using xda premium

new ion? said:
You won't fail. Follow the guidelines step by step. Print it out, make notes. Anything. Read. The step by step guide works... that'll get you with cwm. Then, you can flash the zip you will put on your phone... either a SU zip or just a rooted ROM. Follow flashing instructions.
Just realized - you'll be way better off if, once you have cwm on, just format the internal ONCE YOU HAVE A ROM ON AN EXTERNAL SD CARD. then flash CM10. THEN you'll have a fresh AOSP install.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.

melvinator said:
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.
Click to expand...
Click to collapse
Go back, format system, and then reinstall.
Sent from my SAMSUNG-SGH-T989 using xda premium

Update your recovery to twrp or cwm 6+ and don't use dark side scripts
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2

Please excuse my harshness but this is not as hard as many make it seem. I would say if it takes you more than a couple attempts maybe it is just not for you. I only say this because I would hate to see you mess up your phone. Now if you think a bootloop is a brick then we need to do things at a slower pace with you.
If you already have your phone rooted then
1.download goomanager from the playstore and then
2.open it up and allow it to grant permission from CM
3.hit menu button while goo manager is open
4.click on install OpenRecoveryScript
5.let it do its thing
6.reboot into your new TWRP recovery
7.Wipe/Data Factory Reset
8.Flash Rom
9.Flash Gapps
10.Reboot
You can throw in a backup of files somewhere in there if you like.... Your choice

melvinator said:
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.
Click to expand...
Click to collapse
I had a bootloop when using CWM v6.0.1.5. So a friend of mine told me he had success with CWM v6.0.1.5 Touch. So I switched to the touch recovery and... SUCCESS.
Here's the link to CWM touch and non-touch:
http://forum.xda-developers.com/showthread.php?t=1893464

A boot loop could mean a bad download or bad flash but it is most definitely NOT a bricked device. All you needed to do was get a fresh download and move it to your SD card by mounting it in recovery. Then, wipe EVERYTHING but the SD. EVERYTHING. Then flash the ROM, Gapps and whatever radio. I go from CM to AOKP to other random TW roms all the time and never have issues.

The 2 best recoveries are twrp or my favorite because I'm used to it is cwm 6.0.1.5. http://forum.xda-developers.com/showthread.php?t=1844637
Also if your phone boot loops don't freak out' just either reboot to see if that works out first and if not reboot into recovery. Also with these new recoveries do not use dark side scripts.
Factory reset
Format system
Format cache
Format data
Flash ROM
Flash gapps
Reboot and enjoy
Sent from my SAMSUNG-SGH-T989 using xda premium

This did it!
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Sorry for the necro on the thread, but I didn't want it to be stated I didn't look around some either.
I am going from JMT to CM and want to make sure it's as seamless as possible. I use CWM and usually usually use darkside complete wipes, but I read in a previous post not to use darkside. Is there a reason for this? I can't see why this wouldn't work as it's just a wipe.
Also I use Titanium Backup. Is it possible to backup my apps and data and restore them since its not TW any longer? I want to be able to restore as much of my data as possible and make sure I don't lose it.
P.S. - If thread necroing is not appreciated, I apologize.

[Q] n00b at installing Roms, wanting to install JMTx2

Hi. This is my first time installing a rom onto my newly rooted t989. I wanted to do Jedi Mind Trick x2, but most of the instructions had me lost. I had rooted my phone using the instructions on galaxys2root.com, and they were so easy for me to do. They have a page for installing roms here: galaxys2root .com /t-mobile-galaxy-s2 /how-to-install-rom-on-rooted-t-mobile-galaxy-s2-sgh-t989/ but I didn't know if I could install JMT this way too. Any help would be great, as I really don't want to brick my phone. Thanks!

Dude I'm about a month ahead of you. I would install Rom toolbox and use that to install Twrp. I'm not a big fan of Rom tool box but they make it dam easy to install twrp. After that you're golden. Restart into twrp. Do a full backup and follow Ptmr3 instructions. After flashing I use app extractor to get my phone contacts, call logs,mms, app s and their data from the backup you made first. Hope this helps.
Ps Jedi mind trick is the best Rom I've come across by far
Sent from my SGH-T989 using xda app-developers app

I opus l said:
Dude I'm about a month ahead of you. Are you rooted? That's the big first step. After that I would install Rom toolbox and use that to install Twrp. I'm not a big fan of Rom tool box but they make dam easy to install twrp. After that you're golden. Restart into twrp. Do a full backup and follow Ptmr3 instructions. After flashing I use app extractor to get my phone contracts, call logs,mms, app s and their data from the backup you made first. Hope this helps.
Ps Jedi mind trick is the best Rom I've come across by far
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Awesome, thanks. I'll try that. A lot of the things that confused me were the "wipe system" and other things. The rooting was really easy (i was surprised) and I wanted to do it to install Jedi Mind Trick. Would you recommend x2 or x1? and what are the differences?

Yeah those are options in TWRP. Its to erase sections of the memory from the previous Rom. I had X1 and updated to X2. I have great battery with it after tweaking it, compared to 4.0.4 ROMs. Go X2. Hope everything works out

I opus l said:
Yeah those are options in TWRP. Its to erase sections of the memory from the previous Rom. I had X1 and updated to X2. I have great battery with it after tweaking it, compared to 4.0.4 ROMs. Go X2. Hope everything works out
Click to expand...
Click to collapse
Okay, so I just got Rom Toolbox lite, and I'm trying to find where TWRP is. I have no idea what that even is. lol I'm so bad.

Okay, so I got the rom installed on the phone. Now I just have to figure it out and try and get my stuff back on. It looks like it is going okay so far.

go to the play store and search for "goomanager" after it's installed open it up. once your at the homescreen of that app hit the menu button on your phone (farthest button to the left) you should see "install OpenRecoveryScripts" click that let it download and it will automatically install for you. once it's installed turn off your device and turn it back on holding down the Volume up and down until the Recovery Menu appears. after that download your ROM and place it in your SDcard and follow these instructions to correctly flash a ROM.
I normally do...
Wipe Data/Factory reset
Wipe cache partition
install zip from sdcard
go to Advanced
Wipe dalvik cache
Wipe battery status
Fix permissions (just incase)
Reboot Device
wait about usually 3-8 minutes depends on the ROM. if it's longer then that then your stuck in a boot loop
this is all on done on CWMR v6.0.1.5

Am I the only one with these bugs?

Hi,
I'm new here so please go easy on this "noob"
It was my first to unlock and root my phone, followed by flashing a stock ROM (Which is exactly why I rooted it)
I flashed this JB 4.2.2 stock build [ROM] [OTA][GSM] Android 4.2.2 JDQ39: Rooted | Galaxy Nexus > XDA for my Galaxy Nexus
Now...
I can't disable Next-word suggestions in the Language & Input -> Google Keyboard Settings
Also, I noticed a few seconds of lag when pressing the power button to unlock the phone, when viewing recent apps (via the soft-key), and when opening the Camera too
Also, when I choose the "Recent Apps" soft key.. it's as the app that's currently being used is minimised and the homescreen is shown without any icons
The Build came with Busybox pre-installed and now its gone after a day of using my phone... I literally can't find it.
I searched in the play store "BusyBox" and the result is 3 different apps with the same name!
Any Advice?

AMKhatri said:
Hi,
I'm new here so please go easy on this "noob"
It was my first to unlock and root my phone, followed by flashing a stock ROM (Which is exactly why I rooted it)
I flashed this JB 4.2.2 stock build [ROM] [OTA][GSM] Android 4.2.2 JDQ39: Rooted | Galaxy Nexus > XDA for my Galaxy Nexus
Now...
I can't disable Next-word suggestions in the Language & Input -> Google Keyboard Settings
Also, I noticed a few seconds of lag when pressing the power button to unlock the phone, when viewing recent apps (via the soft-key), and when opening the Camera too
Also, when I choose the "Recent Apps" soft key.. it's as the app that's currently being used is minimised and the homescreen is shown without any icons
The Build came with Busybox pre-installed and now its gone after a day of using my phone... I literally can't find it.
I searched in the play store "BusyBox" and the result is 3 different apps with the same name!
Any Advice?
Click to expand...
Click to collapse
go back to recovery, format/wipe /system partition, reflash rom.
For your reference, a good app to install bb is stephen (stericsson)'s busybox installer (play store link). Obviously, it needs root.
Next time, read the stickies.
http://forum.xda-developers.com/showthread.php?t=1812959
How do I get “root”?
If you are booted into a custom recovery (recoveries will be covered later), root is enabled by default. If you want root while booted into Android, you will need to place two files on your system partition: an “su” binary which grants root access, and a superuser app that manages that access. The two that are available are ChainsDD’s Superuser and Chainfire’s SuperSU. Usually these files are packaged up in a zip file that is flashable using a custom recovery, but they can be flashed manually using ADB. Both of these methods will be described below.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=26328017&postcount=123
As you probably noticed by now, you didn't need to flash a full "custom stock ROM" to root.

beekay201 said:
go back to recovery, format/wipe /system partition, reflash rom.
For your reference, a good app to install bb is stephen (stericsson)'s busybox installer (play store link). Obviously, it needs root.
Next time, read the stickies.
http://forum.xda-developers.com/showthread.php?t=1812959
http://forum.xda-developers.com/showpost.php?p=26328017&postcount=123
As you probably noticed by now, you didn't need to flash a full "custom stock ROM" to root.
Click to expand...
Click to collapse
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PS: Do you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...

AMKhatri said:
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PSo you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
Click to expand...
Click to collapse
You can wipe the system partition in a custom recovery (dont know if you can with stock). And yes you could flash via ROM manager but I wouldnt recommend it. I am on XenonHD 11.1 and loving it. But roms are a personal choice so there is no 'best' ROM. Just try out.
Sent from my Galaxy Nexus using XDA Premium HD app

mrgnex said:
You can wipe the system partition in a custom recovery (dont know if you can with stock). And yes you could flash via ROM manager but I wouldnt recommend it. I am on XenonHD 11.1 and loving it. But roms are a personal choice so there is no 'best' ROM. Just try out.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
The tutorial I followed didn't mention using the ROM manager, but I had not choice.. becuase whenever I went into fastboot mode manually, it got stuck on the screen displaying Google (I waited for minutes without any luck)
How would you recommend CyanogenMod 10.1.2 against the stock 4.2.2 which I have currently?
I read these threads as well whereby they said that there is no "real" solution to the issues:
http://forum.xda-developers.com/showthread.php?t=2178962
http://forum.xda-developers.com/showthread.php?t=2363872

AMKhatri said:
Thanks for replying!
I'm totally new to this rooting &/ flashing thing, so please go easy
So, what you're saying is that I should boot into fastboot mode, wipe system partition (this will format the whole SD card right?), install the same ROM again?
I guess I'll need to install Titanium Backup to backup my apps and settings, I'll have to search for an article for the best way to do it as well..
Can I do it like this:
Open "Rom Manager", Select "Install ROM from SD Card", install it.. ???
PS: Do you have a recommendation for a better ROM, perhaps my choice of ROM wasn't correct...
Click to expand...
Click to collapse
Mr., please, read the LINK i gave you! THIS ONE ->>>> http://forum.xda-developers.com/showthread.php?t=1812959
If you read it, you'll stop thinking you need to be doing anything at this point in FASTBOOT interface! Like mrgnex says, you need to be on a custom recovery to format /system. (Have you read the link yet? By now you should know that the /system partition and the /sdcard/ (aka userdata) are 2 different things!)
mrgnex said:
You can wipe the system partition in a custom recovery (dont know if you can with stock). (...) roms are a personal choice so there is no 'best' ROM. Just try out.
Click to expand...
Click to collapse
+1
For your reference, you can't erase /system in stock recovery.
AMKhatri said:
The tutorial I followed didn't mention using the ROM manager, but I had not choice.. becuase whenever I went into fastboot mode manually, it got stuck on the screen displaying Google (I waited for minutes without any luck)
How would you recommend CyanogenMod 10.1.2 against the stock 4.2.2 which I have currently?
I read these threads as well whereby they said that there is no "real" solution to the issues:
http://forum.xda-developers.com/showthread.php?t=2178962
http://forum.xda-developers.com/showthread.php?t=2363872
Click to expand...
Click to collapse
Stop! THERE'S NO NEED FOR FASTBOOT HERE!

Thanks Guys for replying.
Yes, I read the info in the link, it was very helpful.
I'm still confused though.. "Fast boot" and "Recovery" are they the same thing?
I tried a "fix" mentioned by someone about using a live wallpaper such as "Water", I tried it and it's been 1/2 hour and it's really smooth compared to before...
Yes, I do have a custom recovery, actually I don't know why, but It seems I've got two according to ROM Manager.
It says I've got Clockwork Mod Recovery & TWRP.
I also tried going into recovery (Volume up + Down + Power) and it worked this time, when I select recovery, it goes into CWRM
I also did a bit of research about CyanogenMod 10.1.2 and from what I could gather it's liked by people a lot.
I'm guessing that definitely some time ahead it'll get all "laggy" again, Is there any reason according to you why I shouldn't install it compared to the stock 4.2.2 I have?

AMKhatri said:
Thanks Guys for replying.
Yes, I read the info in the link, it was very helpful.
I'm still confused though.. "Fast boot" and "Recovery" are they the same thing?
I tried a "fix" mentioned by someone about using a live wallpaper such as "Water", I tried it and it's been 1/2 hour and it's really smooth compared to before...
Yes, I do have a custom recovery, actually I don't know why, but It seems I've got two according to ROM Manager.
It says I've got Clockwork Mod Recovery & TWRP.
I also tried going into recovery (Volume up + Down + Power) and it worked this time, when I select recovery, it goes into CWRM
I also did a bit of research about CyanogenMod 10.1.2 and from what I could gather it's liked by people a lot.
I'm guessing that definitely some time ahead it'll get all "laggy" again, Is there any reason according to you why I shouldn't install it compared to the stock 4.2.2 I have?
Click to expand...
Click to collapse
So to get things clear:
No fastboot and recovery arent the same thing.
Vol up+down+power brings you into fast boot and not recovery.
Apparently you dont have 2 custom recoverys since you booted into cwm.
Cm10 is great. But there are many great roms out there. You can start off with cm and then (if you please) look further.
I dont see any reason to not install cm10.1.2 since a whole team built and optimized it. So basically it is a better stock.
When you think your phone is slow you should look into the custom kernels. Thats a different story which I will not begin before you want to
Sent from my Galaxy Nexus using XDA Premium HD app

mrgnex said:
So to get things clear:
No fastboot and recovery arent the same thing.
Vol up+down+power brings you into fast boot and not recovery.
Apparently you dont have 2 custom recoverys since you booted into cwm.
Cm10 is great. But there are many great roms out there. You can start off with cm and then (if you please) look further.
I dont see any reason to not install cm10.1.2 since a whole team built and optimized it. So basically it is a better stock.
When you think your phone is slow you should look into the custom kernels. Thats a different story which I will not begin before you want to
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Thanks! Now it's definitely clear!
I'll download CM10.1.2 tomorrow and will decide to install it once Stock JB 4.2.2 starts acting up again.
In the meantime I'll read on about kernels, please keep don't close this thread...yet.

clerk usdEuro
I've decided that I will test out the Rom that I have currently (4.2.2) for a few weeks, and then flash CM.
I wanted to know one more thing, Is it bad to flash ROMs to your phone every now and then?
Because I've seen people flashing different ROMs on their phone, I don't wanna damage my phone as I want it to last as long as I can make it.
(by "Bad" I mean... does it reduce the phone's life or it's hardware's life span)

AMKhatri said:
I've decided that I will test out the Rom that I have currently (4.2.2) for a few weeks, and then flash CM.
I wanted to know one more thing, Is it bad to flash ROMs to your phone every now and then?
Because I've seen people flashing different ROMs on their phone, I don't wanna damage my phone as I want it to last as long as I can make it.
(by "Bad" I mean... does it reduce the phone's life or it's hardware's life span)
Click to expand...
Click to collapse
No it can't. I was a flashaholic (until I discovered XenonHD) and my phone didn't got worse. Only overclocking the CPU and gpu can affect the life of the CPU or gpu (or both XD). Just do a fresh install everytime and read the post of the ROM of your choice to see what to do to get it working optimally. If you have any problems just ask.
Sent from my Galaxy Nexus using XDA Premium HD app

mrgnex said:
No it can't. I was a flashaholic (until I discovered XenonHD) and my phone didn't got worse. Only overclocking the CPU and gpu can affect the life of the CPU or gpu (or both XD). Just do a fresh install everytime and read the post of the ROM of your choice to see what to do to get it working optimally. If you have any problems just ask.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Thanks...
I'll flash CM in a week or two, as I'm on a tight schedule currently, and I also wanna note down the average battery time I get out of 4.2.2

So... since 4.3 is now out, I was thinking it'd be better for me to flash it other than anything else.
I'll most probably download the stock rom from:
https://developers.google.com/android/nexus/images#yakjujwr66v
So far I came across this thread having the steps to flash 4.3
http://forum.xda-developers.com/showthread.php?t=2377307
But I wanna flash it and lose my data, so that it's as fresh as it can be...
Will that work if I use "wugfresh root toolkit"?

AMKhatri said:
So... since 4.3 is now out, I was thinking it'd be better for me to flash it other than anything else.
I'll most probably download the stock rom from:
https://developers.google.com/android/nexus/images#yakjujwr66v
So far I came across this thread having the steps to flash 4.3
http://forum.xda-developers.com/showthread.php?t=2377307
But I wanna flash it and lose my data, so that it's as fresh as it can be...
Will that work if I use "wugfresh root toolkit"?
Click to expand...
Click to collapse
With the stock package there is no need for a toolkit.
Hell, there's no reason for a toolkit any time.
Sent from my Galaxy Nexus

Pirateghost said:
With the stock package there is no need for a toolkit.
Hell, there's no reason for a toolkit any time.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
What was I thinking...
I apologize guys... I guess I wasn't thinking straight as its past midnight here...
So just to clarify stuff so that I don't end up doing something wrong:
-> Head into Recovery Mode (with usb debugging enabled... connect usb cable to phone and pc)
-> Wipe System
-> Wipe Cache
-> Install from SD card (select .zip file)
right?
Also, I performed a backup of the applications I have via Titanium Backup, They'll work on 4.3 when I restore them right? or do you recommend downloading them from the play store again?
Sorry for being such a noob, and Thanks for your responses!

backup everything from your /sdcard to your computer, titanium backups and a nandroid
the google stock package is NOT flashable in CWM/TWRP
if you follow the GOOGLE instructions it WILL wipe your device (remember that backup you made of everything?)
alternatively you can make sure and have adb/fastboot working on your computer properly, extract all the files out of the zip (including the tar.gz located inside), and in recovery, do a factory reset, then boot to fastboot, fastboot flash system and boot ....
as for Titanium Backup, there is a work around to get it working on 4.3, but root is lacking full power.

Pirateghost said:
backup everything from your /sdcard to your computer, titanium backups and a nandroid
the google stock package is NOT flashable in CWM/TWRP
if you follow the GOOGLE instructions it WILL wipe your device (remember that backup you made of everything?)
alternatively you can make sure and have adb/fastboot working on your computer properly, extract all the files out of the zip (including the tar.gz located inside), and in recovery, do a factory reset, then boot to fastboot, fastboot flash system and boot ....
as for Titanium Backup, there is a work around to get it working on 4.3, but root is lacking full power.
Click to expand...
Click to collapse
Thanks!
I'm now on Android 4.3
I'm full of excitement atm :victory:
I took a backup of my apps using titanium backup, I installed it but can't use it, it says I need root (which I already had before).
I read online somewhere that I need to root again, but I don't wanna lose all my data/ apps I installed again...
Any ideas?
If I use Wugfresh Nexus Root Toolkit... will I lose my data?
Thanks for the continued support!

AMKhatri said:
Thanks!
I'm now on Android 4.3
I'm full of excitement atm :victory:
I took a backup of my apps using titanium backup, I installed it but can't use it, it says I need root (which I already had before).
I read online somewhere that I need to root again, but I don't wanna lose all my data/ apps I installed again...
Any ideas?
If I use Wugfresh Nexus Root Toolkit... will I lose my data?
Thanks for the continued support!
Click to expand...
Click to collapse
Seriously, how hard can it be for you people to waste 5, 5!!! minutes to browse the forums.
http://forum.xda-developers.com/showthread.php?t=2377318

Thanks!
According to a friend's recommendation I used Wugfresh Nexus Root Toolkit to Root, and surprisingly didn't lose any of my data!
Once again, Thanks for all the help everyone... You've all been quite helpful.