hey there,
would it be possible to add a toggle/shortcut to enable call and message forwarding? its a bit "complicated" to do it through the standard settings.
DN41
There is a shortcut for Directdial. Is not that enough for you? I do not know if there is any shortcut for sms forwarding though...
directdial?
mh...a "toggle" would be really nice though.
DN41
DN41 said:
directdial?
Click to expand...
Click to collapse
Create two new Contacts: one named Forward_On w/ phone number **21# and one named Forward_Off, phone number #21#.
you can pick other names if you like.
now, from your home-screen select
Personalize > Shortcut > direct dial > pick "Forward_On" > pick the item w/ **21# as number and repeat the same for "Forward_Off". Now you should have 2 Items on your homescreen which turn call forwarding on and off.
Finally (if you haven't done so already), set up the destination phone number by calling **21*0123456789#, replacing 0123456789 w/ the phone number you want to redirect all your calls to.
wow thats great
thanks a lot
is that possbile with message forwarding as well?
DN41
No, you cannot do message forwarding this way. (Call forwarding is a gsm-feature which is configured using the codes I mentioned. That means, once you activated this feature, your service provider will do all the forwarding for you, your phone doesn't do anything to forward a call. Message forwarding on the other hand is a sense-feature. Thus it cannot be set up with a gsm-code and you will have to use another method.)
you might want to try an app like Any Cut or BetterCut but I don't think your chances are too great...
ok, but thanks a lot for those informations.
i'm gonna ask the dev of widgetsoid, if he could do such a toggle.
DN41
llama-power said:
Create two new Contacts: one named Forward_On w/ phone number **21# ...
.
Click to expand...
Click to collapse
This should be "*21#" on my carrier, fwiw
llama-power said:
Create two new Contacts: one named Forward_On w/ phone number **21# and one named Forward_Off, phone number #21#.
you can pick other names if you like.
now, from your home-screen select
Personalize > Shortcut > direct dial > pick "Forward_On" > pick the item w/ **21# as number and repeat the same for "Forward_Off". Now you should have 2 Items on your homescreen which turn call forwarding on and off.
Finally (if you haven't done so already), set up the destination phone number by calling **21*0123456789#, replacing 0123456789 w/ the phone number you want to redirect all your calls to.
Click to expand...
Click to collapse
Wow. U are great
UPDATED: 9.14.14
IMPORTANT SUMMARY OF CHANGES MADE OR ADDED
9.14.14
Google integrated Google Voice with Google Hangouts. Now you can make AND receive phone calls right from the Google Hangouts app. This also means you can receive phone calls over WiFi made to your Google Voice phone number, and yes, you can receive texts sent to your Google Voice number as well.
You'll need the latest Google Hangouts app installed version 2.3, which might not be available yet in the Google Play store as of this post. You'll also need to install the Hangouts dialer. Plus, ensure you have the "Incoming phone calls" setting ticked, which can be found in the Hangouts app setting page for your account.
Google Hangouts app on the Playstore link
Hangouts dialer app on the Playstore link
If the Playstore doesn't have Hangouts 2.3 yet, you can download the APK from this site
Keep in mind, if you wish to use the data time of your FreedmPop plan, you should be able to simply use Hangouts for calls, and all calls over WiFi will not use your allotted FreedomPop time. However, if you're mobile, and need to use the minutes or data allotted for mobile talk or data time, you'll still need to use the carrier number provided by FreedomPop and all time used will be deducted accordingly.
7.21.14
If you're experiencing call quality issues in CSipSimple, then check out this post for a possible workaround.
LINK TO POST
3.8.14
It appears FreedomPop revised the account information for Username and Account ID. These now need to be added into CSipSimple in a different way, otherwise you won't gain access.
I'm not sure if your current configuration will now fail, but if it does, then follow the revised instructions in the CSipSimple Method under account information, to see the new way of inputting your Username and Account ID.
I haven't updated the AOSP method yet, so if you need to change that, look over the revised instructions in the CSipSimple Method to get an idea of what to enter.
3.4.14
Added alternative option to filters for Google Voice automation to the CSipSimple guide
Added instruction on how to backup CSipSimple settings
3.3.14
Added new section for configuring the native AOSP dialer to work with a FreedomPop account
Moved some information around
Revised introduction
Added Troubleshooting section to CSipSimple method
Thanks to member phigan for posting information about the Prefixer app and listing a dialing rule.
Thanks to member bads3ctor for listing commands to extract the FreedomPop account database in Linux.
2.27.14
Added recommendation to set Echo mode to auto under the Settings > Media section. This option was recommended by el34han who was experiencing audio crackling issues, and by Unticking Echo cancellation, and setting Echo mode to auto, his audio improved. Only apply this option if you're experiencing call quality issues to see if it improves the audio.
2.21.14
I added instructions on how to create filters if your Google Voice account is set to use a pin number and required for access. When I initially posted this guide, I never addressed how to create a filter when a pin number is active for a Goolge Voice account.
I expanded upon the "Settings" section of this guide. I reviewed all the settings in the current FreedomPop Messaging app, and added them to the "Settings" section of this guide.
I posted this guide for FreedomPop subscribers that would like to better integrate their Google Voice number with their FreedomPop account. This guide can also be used as a method to get your FreedomPop account working in a KitKat ROM, or as a way to use your FreedomPop account for calls and data without the need of the FreedomPop Messaging app, though texting will not work without the FreedomPop Messaging app.
Currently there are two methods you can choose from. The AOSP Dialer Method, and the CSipSimple Method, both listed below.
The following prerequisites must be met to follow either method...
Rooted Android OS.
FreedomPop Messaging app configured and working with your account.
Titanium Backup app (free edition) installed.
Unknown Sources option is ticked in Androids Setting > Security section.
Google Voice users must ensure their Google Voice number is forwarded to their FreedomPop number. This is done at the Google Voice account setting page.
I expanded a bit on a guide I originally saw over at http://blog.drewwithers.com. Hopefully I made it a little more noob friendly.
This guide is a work in progress, so if things aren’t working out, check back to see if corrections were made. If you anyone knows of an easier way to accomplish Google Voice integration with FreedomPop, please post up your suggestions.
AOSP Dialer Method
This method configures your native AOSP dialer with your FreedomPop account information. The options to configure your call quality and SIP settings are limited in this method. If you’re experiencing call quality issues or other problems, you can try the CSipSimple Method, which offers more options to improve call quality and compatibility.
Can be used to replace the FreedomPop Messaging app for calls and data usage
Can be used for texting to your FreedomPop number, only with ROMs the FreedomPop app can be installed. You will not be able to install the FreedomPop app in a KitKat ROM. Keep in mind, the FreedomPop Messaging app might cause issues with your AOSP dialer that’s configured with your FreedomPop account.
Can be used for Google Voice number dialing
Can be used for texting with a Google Voice phone number
Can be used with KitKat ROM
ACCOUNT INFORMATION EXTRACTION
First we need to extract some account information from your FreedomPop account, which can be obtained by backing up the FreedomPop app.
LINUX USERS
Here are commands for use to extract your FreedomPop account file.
Code:
sudo apt-get install sqlitebrowser
adb root
adb pull /data/data/com.freedompop.phone/databases/com.freedompop.phone.db
sqlitebrowser com.freedompop.phone.db
In Titanium Backup, select Backup/Restore, select the Messaging App, then select Backup.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Titanium Backup will create a file named com.freedompop.phone-xxxxxxxxxx.tar.gz. This file is located in the TitaniumBackup folder, which should be located at the root of your phones internal SDcard.
Transfer that file to your PC.
Now that you have the file transferred to your PC, you’ll need to extract the contents.
After extraction, you’ll have a folder named data.
Keep opening the data sub-folders within till you see a folder named databases.
Within the databases folder, you should now see a file named com.freedompop.phone.db. You will need to open this file with a sqlite viewer. I’m using Windows, so I used an app named sqlitebrowser, click the link to grab the viewer.
Open the database file with the viewer. Click the Table dropdown menu. Select accounts.
You should now see a table filled with data. Scroll over to the column named data.
You will see a 32-character hex string. Copy that string, and save it to a file, you’ll need to enter that into CSipSimple.
Now, we can move onto configuring the native AOSP dialer.
DIALER ACCOUNT SETTINGS
In this section, I’m using the native AOSP dialer in a Cyanogenmod KitKat ROM.
Open native dialer
Goto the dialer's settings section
Configure the following...
Use Internet calling
For all calls when data network is available > tick this option
Accounts
Receive incoming calls > tick this option
Accounts
tap ADD ACCOUNT
Username
Enter: your FreedomPop phone and area code, beginning with 1, example: 15555555555
Password
Here you will enter the 32-character hex string you extracted earlier.
Server
Enter: fp.layered.net
Now tap Optional settings and configure the following...
Transport type
TCP > tick this option
Now tap save, and that completes account registration.
I posted an image below highlighting the settings that need to be configured for easier reference.
PLACING CALLS
In order to place a call, you must dial 1 first. For example, a call placed such as this will not go through 555-555-5555. The call must be preceded with a one like this 1-555-555-5555.
You can install an app named Prefixer, which will automatically dial a one in case you forget. In order for Prefixer to perform such a task, you must add a rule that will automatically input a one in case you forget.
I linked the rule necessary to accomplish this task. Download the rule, copy it to your phone, then open Prefixer.
Link to Prefixer rule > Prefixer Prefix 1 Outgoing Call Rule
At the top left corner in Prefizer, tap the down arrow, select Import rules. Then navigate to where you copied the file and install it. Once installed, you should see the rule listed in Prefixer. Close the app, and Prefixer should now automatically insert a 1 should you forget.
GOOGLE VOICE USERS
To complete a full integration, so your Goggle Voice number will be seen by the party you call, you will have to install an app named Voice+ (Google Voice Callback). This app will prompt you with an option to automatically route your outgoing calls via Google Voice.
Download and install the app, then open the app and tick Outgoing call integration.
Next, tap Google account, and select your Google Voice account.
You’ll be prompted with a window offering an option to add numbers to the "Visible numbers" section. Your Google Voice account will be listed in the Visible numbers section. You should also move your FreedomPop number into the Visible numbers section as well. Sometimes the number you move into the Visible numbers section doesn’t save, so you’ll need to close the app and check back by going into Callback Numbers to see if the number you moved into the Visible numbers section saved.
Now, to call out with your Google Voice number, open your dialer, input a number and press call. You’ll be prompted with a window offering several calling options. Choose Google Talk Callback that’s listed with your Google Voice account. It should immediately connect you via Google Voice.
If you have a problem connecting, then try the Google Talk option that lists your FreedomPop number. If you choose this option, your phone will ring you back. Answer the call and you should be connected with the party you’re calling.
GOOGLE VOICE TEXTING
To text with your Google Voice account, install the Google Voice app.
Upon installing the Google Voice app you’ll be prompted with an option for Making calls with Google Voice. Select Do not use Google Voice to make any calls. Also, there might be prompts to configure certain features that are not available with Sprint, skip them if you can’t configure them.
After the Google Voice app is installed, you can go into Google Voice's settings section and under Sync and Notifications you can configure the app to receive texts via the Google Voice app or the Messaging app. I found the Google Voice app is more responsive upon sending and receiving text.
Google Voice also installs another app named Voice+. This app is in the app drawer with a blue icon and white phone on it named Voice+. Don't confuse this app with the other Voice+ app you recently installed. Open the Google Voice+ app and select your Google Voice account to enable all apps to send SMS through Google. If you try using another app for SMS, or you’re experiencing problems, then select Disable in the Google Voice+ app to see if your problem gets resolved.
END AOSP DIALER METHOD GUIDE
CSipSimple Method
This method uses the CSipSimple app to replace the FreedomPop Messaging app, and utilizes CSipSimples filtering abilities to automate Google Voice call routing.
Can be used to replace the FreedomPop Messaging app for calls and data usage
Cannot be used for texting to your FreedomPop number since the FreedomPop Messaging app will have to be uninstalled
Can be used for Google Voice number dialing
Can be used for texting with a Google Voice phone number
Can be used with KitKat ROM
PART 1 OF 2: ACCOUNT INFORMATION EXTRACTION AND CONFIGURATION
First we need to extract some account information from your FreedomPop account, which can be obtained by backing up the FreedomPop app.
LINUX USERS
Here are commands for use to extract your FreedomPop account file.
Code:
sudo apt-get install sqlitebrowser
adb root
adb pull /data/data/com.freedompop.phone/databases/com.freedompop.phone.db
sqlitebrowser com.freedompop.phone.db
In Titanium Backup, select Backup/Restore, select the Messaging App, then select Backup.
Titanium Backup will create a file named com.freedompop.phone-xxxxxxxxxx.tar.gz. This file is located in the TitaniumBackup folder, which should be located at the root of your phones internal SDcard.
Transfer that file to your PC.
Now that you have the file transferred to your PC, you’ll need to extract the contents.
After extraction, you’ll have a folder named data.
Keep opening the data sub-folders within till you see a folder named databases.
Within the databases folder, you should now see a file named com.freedompop.phone.db. You will need to open this file with a sqlite viewer. I’m using Windows, so I used an app named sqlitebrowser, click the link to grab the viewer.
Open the database file with the viewer. Click the Table dropdown menu. Select accounts.
You should now see a table filled with data. You will need to copy the contents of three fields in order to complete account registration in the CSipSimple app. Those fields are...
acc id
username
data
I suggest copying the information to a text file and transferring the file to your phone, so you can open it with a text editor and copy the information necessary.
Now, we can move onto installing and configuring CSipSimple.
First, uninstall the FreedomPop Messaging app.
Now, download the latest CSipSimple apk (click link), and install via your Android file manager.
After installation, open CSipSimple. You’ll be prompted with some system settings, just hit save for now.
Tap Add Account, and scroll the wizard down till you see Expert, and select that option.
Now, make the below listed changes...
Account Name
Enter: FreedomPop
Account id
Enter: <sip:[email protected]>
This is an example of how your account id might look. Please note, your ID might differ, and not include an underscore or trailing random characters. Just enter it exactly how it was in the acc id field form the data base.
Registration URI
Enter: sip:fp.layered.net
Realm
Enter: *
Username
In this box you need to enter the information you copied from the username field. IMPORTANT: If the username field simply listed a phone number, then just input that number exactly how it was listed in the data base.
EXAMPLE: 15555555555
However, you may have a username that was listed with more information. If the information listed in the username field looks similar to this...
EXAMPLE: [email protected]
Then you need to enter only the phone number and trailing characters up to the @ symbol, which should look like this...
ENTER: 155555555_A001122G2222
Data
Here you will enter the 32-character hex string you extracted earlier.
Data Type
Make sure plain password is selected
Transport
Make sure TCP is selected
Default uri scheme
Make sure sip is selected
Register timeout (sec)
Make sure 900 is entered.
Proxy URI
Enter: sip:fp.layered.net
You’re now done with the account information. Tap “Save” at the bottom.
SETTINGS
Now go to the CSipSimple Settings page...
Configure the following settings (if there is no instruction for an option, then leave that option in its default setting)...
Easy configuration
Integrate with Android > Tick this option
Available on WiFi > Tick this option
I'm allowed to use mobile > Tick this option
Network
Use compact SIP > Tick this option
Connection keep alive
Wifi UDP keep alive > set to 80
Mobile UDP keep alive > set to 100
Wifi TCP keep alive > set to 180
Mobile TCP keep alive > set to 120
Wifi TLS keep alive > set to 180
Mobile TLS keep alive > set to 120
Secure transport
SRTP mode > set to disabled
ZRTP mode > set to No ZRTP
FOR INCOMING CALLS
Use WiFi > Tick this option
Use 3G (and better) > UnTick this option
Use other networks > Tick this option
FOR OUTGOING CALLS
Use WiFi > Tick this option
Use 3G (and better) > Tick this option
Use other networks > Tick this option
Media
Echo cancellation > Tick this option
Clock rate > Set to 16KHz
Media thread count > Set to 2
Codec priority list per band > Tick this option
CODECS
Fast: PCMU 8kHz, ILBC 8kHz ensure these are the only codecs ticked
Slow: ILBC 8kHz ensure this is the only codec ticked
Initial stream level > Set to 8.0
User Interface
Dialer integration > Tick this option
Call logs integration > Tick this option
Mobile phone integration > Set to Prevent
Dialing tone feedback > Set to Use Android setting
Dialing vibrate feedback > Set to Use Android setting
DTMF tone feedback > Set to Prevent
Prevent screen rotation > Tick this option
Call Options
DTMF mode > Set to In band generation
That’s it for account configuration. You can check to see if all went well by tapping the key icon on the CSipSimple dialer page, which will send you back into account setup. You should see your FreedomPop account. If all went well, it should be green, with “Registered” listed below.
BACKING UP ACCOUNT
Now that all account settings have been completed, it's a good idea to back up your settings to a file. To do this, on the dialer page in CSipSimple, tap the Account button (has a key on it). Now tap the settings button (top right corner if displayed). Tap Backup / Reorder. Finally, tap Backup.
A backup file will be created in your internal storage located at the following path: CSipSimple > Configs. Copy the backup file and store it for future recovery.
To restore a backup, first make sure your backup file is located in the CSipSimple > Configs folder. Then repeat the steps above to restore.
IMPORTANT: I found that after a restore, some settings don't fully restore, particularly the Codecs setting found under Media in settings. If you do a restore, check the codecs settings to see if you need to reconfigure the settings. You may want to re-check all the recommended settings to ensure they have fully restored from a backup.
You can now go to the final step and set up the call filters.
PART 2 OF 2: FILTER CONFIGURATION
STEP 1 CONFIGURING CLIENT DTMF MODE
You can skip this step if you already configured DTMF Mode in Part 1 of this guide.
In step 1, you need to configure CSipSimple app DTMF Mode to "In band generation". Hopefully this setting won't have any undesired effects. I had to change this setting so Google Voice will dial a number upon automating via the filter.
STEP 2 CSipSimple FILTER PAGE
This step shows how to access the CSipSimple filter configuration page.
STEP 3 CREATING THE NECESSARY FILTERS
This step shows how create the two filters needed so your dialer will automate contacting Goolge Voice and dial the phone number you inputted to contact.
Please note, you'll need to swipe up to see the rest of the filter setting that's hidden by the keyboard.
There are two filter methods to choose. Only use the method that matches how your Google Voice account is configured.
For example, if you use a pin number to access Google Voice, then use the PIN FILTER method.
Use the NO PIN FILTER method if you configured your Google Voice account to work without a pin.
NO PIN FILTER
Only use these filters if you configured your Google Voice account to work without pin number access.
PIN FILTER:
Only use these filters if you're required to enter a pin number for Google Voice access.
IMPORTANT: THESE FILTERS WILL NOT WORK WITH THE CSIPSIMPLE APP DIALER. YOU MUST HAVE YOUR ANDROID DIALER INTEGRATED WITH THE CSIPSIMPLE APP, AND USE YOUR ANDROID DIALER TO MAKE CALLS.
Dialer integration is automatically configured by default in the CSipSimple app. However, if you want to ensure it's configured for dialer integration, open your CSipSimple app, go into Settings > Easy Configuration > and ensure the "Integrate with Android" setting is ticked.
FILTER ALTERNATIVE (OPTIONAL)
If you’re not satisfied how the CSipSimple filters automate Google Voice integration, there’s an optional alternative you can try using a couple of apps. If you proceed to try this method, you’ll need to first delete any filters you created in CSipSimple that were instructed by this guide. The below apps will replace the automation the filters provided.
PLACING CALLS
In order to place a call, you must dial 1 first. For example, a call placed such as this will not go through 555-555-5555. The call must be preceded with a one like this 1-555-555-5555.
Installing an app named Prefixer, will automatically dial a one in case you forget. In order for Prefixer to perform such a task, you must add a rule that will automatically input a one in case you forget.
I linked the rule necessary to accomplish this task. Download the rule, copy it to your phone, then open Prefixer.
Link to Prefixer rule > Prefixer Prefix 1 Outgoing Call Rule
At the top left corner in Prefizer, tap the down arrow, select Import rules. Then navigate to where you copied the file and install it. Once installed, you should see the rule listed in Prefixer. Close the app, and Prefixer should now automatically insert a 1 should you forget.
GOOGLE VOICE AUTOMATION
To complete a full integration, so your Goggle Voice number will be seen by the party you call, you will have to install an app named Voice+ (Google Voice Callback). This app will prompt you with an option to automatically route your outgoing calls via Google Voice.
Download and install the app, then open the app and tick Outgoing call integration.
Next, tap Google account, and select your Google Voice account.
You’ll be prompted with a window offering an option to add numbers to the "Visible numbers" section. Your Google Voice account will be listed in the Visible numbers section. You should also move your FreedomPop number into the Visible numbers section as well. Sometimes the number you move into the Visible numbers section doesn’t save, so you’ll need to close the app and check back by going into Callback Numbers to see if the number you moved into the Visible numbers section saved.
Now, to call out with your Google Voice number, open your dialer, input a number and press call. You’ll be prompted with a window offering several calling options. Choose Google Talk Callback that’s listed with your Google Voice account. It should immediately connect you via Google Voice.
If you have a problem connecting, then try the Google Talk option that lists your FreedomPop number. If you choose this option, your phone will ring you back. Answer the call and you should be connected with the party you’re calling.
TROUBLESHOOTING
If you experience any audio issues, such as crackling audio, you can try the following step to see if it resolves the problem.
First, you need turn on "Expert mode". This mode reveals hidden settings you'll need to change. To turn on "Expert mode", go to the CSipSimple settings page. Next tap the settings button, then tap "Expert mode", as illustrated in the picture below.
Next, configure the following options...
Goto the Media section in settings.
Echo cancellation > Untick this option
Echo mode > Set to Auto
By disabling Echo cancellation, and setting Echo mode to Auto, this might resolve any audio crackling issues.
Awesome thank you for this, I've missed my Google Voice since switching to FreedomPop. About to try it out now.
bilgerryan said:
Awesome thank you for this, I've missed my Google Voice since switching to FreedomPop. About to try it out now.
Click to expand...
Click to collapse
Hope it works out. I haven't thoroughly tested it, so I'm not sure how well it might work. Good luck.
I originally tested this using the CSipSimple app with my extracted FreedomPop account information on a Kit-Kat ROM, and it worked well.
I just switched back to a Stock JellyBean ROM so I could test the filters on the actual FreedomPop Messaging app, and it doesn't appear to work. I think FreedomPop may have disabled the filters in their Messaging app, or it could be the Stock OS dialer preventing something from working.
If anyone has had luck with this using the FreedomPop Messaging App with the filters, please post your results and ROM you're using.
If we can confirm FreedomPop disabled the filters on their Messaging App, then the only way to fully integrate Google Voice is extracting your FreedomPop account information, uninstalling the FreedomPop Messaging app, installing CSipSimple app, add your account info, then create the filters.
I'll post a more elaborate tutorial showing how to get the CSipSimple app up and going if we can confirm the filters don't work in the FreedomPop Messaging app.
copota said:
Another benefit of using the CSipSimple app is that it's supported in Android Kit-Kit. The FreedomPop Messaging app currently is not supported in Kit-Kat, and will crash upon using it.
Click to expand...
Click to collapse
Here's my question, since Android Kit Kit don't support wimax.. How can you able to run FreedomPop 4G with Android Kit K. or what said just using Wifi data??
Tekone said:
Here's my question, since Android Kit Kit don't support wimax.. How can you able to run FreedomPop 4G with Android Kit K. or what said just using Wifi data??
Click to expand...
Click to collapse
FreedomPop has 3G too I use FreedomPop without Wimax in my area, they try to trick you into thinking it only works on 4G. I pay $25 bucks a month for my wife and I only thing that sucks is the app is a battery killer, really thinking about getting an extended battery.
Tekone said:
Here's my question, since Android Kit Kit don't support wimax.. How can you able to run FreedomPop 4G with Android Kit K. or what said just using Wifi data??
Click to expand...
Click to collapse
Simple, you go without 4G and use their 3G for internet. The reason I went with FreedomPop is for an affordable mobile voice and text solution, and having internet is just an added bonus, which all I actually need it for is updating my GPS routing and e-mail, which works fine on 3G.
Why the need for 4G anyhow? It's not like you're getting unlimited data. If you're doing anything that requires hi-speed internet, your allotted data will be gone in an instance. If you really need hi-speed mobile web, I'd suggest ponying up for an upper tier provider and going with an LTE unlimited solution.
Wimax in my area is spotty anyhow, nothing I'd miss in the first place, and I'd MUCH PREFER the features and security of Kit-Kat than spotty Wimax 4G that will drain my battery in an hour of browsing on a 4" screen. If I need the internet, I still have 3G on Kit-Kat.
bilgerryan said:
FreedomPop has 3G too I use FreedomPop without Wimax in my area, they try to trick you into thinking it only works on 4G. I pay $25 bucks a month for my wife and I only thing that sucks is the app is a battery killer, really thinking about getting an extended battery.
Click to expand...
Click to collapse
Haha.. $25 plan with 3G only. you could get a grandfather plan from Virgin Mobile off ebay with 300 reliable mins, unlimited text and data.
Tekone said:
Haha.. $25 plan with 3G only. you could get a grandfather plan from Virgin Mobile off ebay with 300 reliable mins, unlimited text and data.
Click to expand...
Click to collapse
That's for two phones, I have unlimited text and call and 1GB each. I use Wi-Fi most of the time so all I need was call and text really. You really can't beat $12.50 per phone.
trying this as soon as I unbrick my phone. does anyone have calling feature via wifi? I can't answer calls on wifi. I have to turn it off when a call comes in. half the time I am i just use groove ip
Cltme89 said:
trying this as soon as I unbrick my phone. does anyone have calling feature via wifi? I can't answer calls on wifi. I have to turn it off when a call comes in. half the time I am i just use groove ip
Click to expand...
Click to collapse
Mine works just fine over Wi-Fi... Usually better than 3G
bilgerryan said:
Mine works just fine over Wi-Fi... Usually better than 3G
Click to expand...
Click to collapse
Does it make two calls at once on wifi?
Cltme89 said:
trying this as soon as I unbrick my phone. does anyone have calling feature via wifi? I can't answer calls on wifi. I have to turn it off when a call comes in. half the time I am i just use groove ip
Click to expand...
Click to collapse
I read in FreedomPop's Q&A that minutes are deducted if using WiFi to place calls. So I used Sipdroid to create a free account with pbxes.com, which you can connect your Google Voice number, then place WiFi calls free of charge. Once you have your pbxe account configured, you simply add that account into the CSipSimple app, then you can add a couple of toggle widgets to your Homescreen. This way, when you're home or over WiFi, you toggle off FreedomPop, and toggle on pbxe to make free wifi calls via your Google Voice number.
BTW, I'm using FreedomPop's free service, so if you're paying for FreedomPop's unlimited calling, which is quite affordable, then there's no need to go through the hassle of setting up an account with pbxe for free WiFi calling.
copota said:
I read in FreedomPop's Q&A that minutes are deducted if using WiFi to place calls. So I used Sipdroid to create a free account with pbxes.com, which you can connect your Google Voice number, then place WiFi calls free of charge. Once you have your pbxe account configured, you simply add that account into the CSipSimple app, then you can add a couple of toggle widgets to your Homescreen. This way, when you're home or over WiFi, you toggle off FreedomPop, and toggle on pbxe to make free wifi calls via your Google Voice number.
BTW, I'm using FreedomPop's free service, so if you're paying for FreedomPop's unlimited calling, which is quite affordable, then there's no need to go through the hassle of setting up an account with pbxe for free WiFi calling.
Click to expand...
Click to collapse
Thanks for the tip. Im am using the unlimited plan so that doesn't really matter. but I do want to know about the performance of Sipdroid. Does it have the bad delay that Freedompop and Groove IP come with? FreedomPop isnt bad.....when it works, its just so buggy. I emailed them about my issue over wifi with the double calls and they said they escalated it to the development team. I wish they would just buy one of these other companies that have the kinks worked out.
Cltme89 said:
Thanks for the tip. Im am using the unlimited plan so that doesn't really matter. but I do want to know about the performance of Sipdroid. Does it have the bad delay that Freedompop and Groove IP come with? FreedomPop isnt bad.....when it works, its just so buggy. I emailed them about my issue over wifi with the double calls and they said they escalated it to the development team. I wish they would just buy one of these other companies that have the kinks worked out.
Click to expand...
Click to collapse
I'm not able to check my voicemail, other than that they just need to improve their app on battery life.
Cltme89 said:
Thanks for the tip. Im am using the unlimited plan so that doesn't really matter. but I do want to know about the performance of Sipdroid. Does it have the bad delay that Freedompop and Groove IP come with? FreedomPop isnt bad.....when it works, its just so buggy. I emailed them about my issue over wifi with the double calls and they said they escalated it to the development team. I wish they would just buy one of these other companies that have the kinks worked out.
Click to expand...
Click to collapse
Do you have Use Wi-Fi Calling checked in the app settings?
Anybody else having problems since today's app update? Mine is saying it can't find my account. I emailed them, hopefully it gets fixed soon. My data is working fine at least.
Let me ask.. this integration method with FReedompop account will work Freedompop sms too? The reason to filter Google voice number make call and text right?
How are you guy's voicemail set up? When I use the same filter settings, it dials to my google voice number and places the call properly but immediately disconnects.
theshonen8899 said:
How are you guy's voicemail set up? When I use the same filter settings, it dials to my google voice number and places the call properly but immediately disconnects.
Click to expand...
Click to collapse
Check it through the Google Voice app