hi,
i got a HTC Rhodium / Vario V with the build in SIP by HTC (v. 2.1 1119.1320)
is it possible to switch to the numeric pad programmatically, if a certain control gets the focus in my application?
i tried to use SipEnumIM / SipSetCurrentIM but it seems like there is only one SIP installed and the switch between alphabetic and numeric keypad is made in the sip internaly...
Related
Hi all, after I install the intellidialer in my IIs, my Qwerty keyboard can only input one digital number on the pop-up intellidialer's phone pad when I use the Qwerty keyboard to dial, but it work fine if I disable the intellidialer. Any help for this issue when I enable intellidailer? Thanks.
Does Anyone know this issue?
Hi all, I have SIP No 5 software which basically let's you write in Chinese language on the screen, it adds the option at the bottom where your keyboard/transriber options are. Anyway, I used this on my o2 exec with no problems. Tried it on my Orbit, installs fine, executes fine but it is stuck in vga mode which means it is MASSIVE infact TOO BIG for the screen. Is there any program which can force it to qvga mode? Or even better, does anyone have a qvga version they can send me?
I have a compatability problem between my new HTC Touch Pro 2 and my new Volvo XC 60 as detailed below. HTC say the following
The Bluetooth stack refers to the suite of protocols that are compiled to provide Bluetooth functionality. At this time, there is currently no official software available that will correct this issue. It may be possible for you to obtain third-party software
Is there anyone who may know if such a Third Party Software provider who can resolve this, many thanks
Regards
Symptoms of failure of the Bluetooth set up
Does dial out but doesn’t ring inside the phone
Does connect to other end but no voice can be heard at either end
Does download the phonebook
Background
Phone shipped as HTC Touch Pro 2 with Windows Mobile 6.5 – ROM 1.86.401.0 (401 Designates English)
Car delivered as follows Volvo XC 60 – 04.22_R Bluetooth
Phone publicised on Volvo Cars web site as compatible
Firmware must be version ROM 1.19.413.2
Downgraded the phone to ROM 1.19.413.2, phone becomes Swedish + Windows Mobile 6.1
Downgrade the phone to ROM 1.19.401.1 phone becomes English + Windows Mobile 6.1
Without setting up the e-mail the phone becomes compatible with car Bluetooth for voice and phonebook
Setting up e-mail the phone returns to the original issue as per symptoms
Upgrade back to ROM 1.86.401.0 + Windows Mobile 6.5
Without setting up the e-mail the phone becomes compatible with car Bluetooth for voice, says that it downloads the phonebook, but no data is available from car side
Setting up e-mail the phone returns to the original issue as per symptoms
Yesterday upgrade car so that latest version of Bluetooth for Volvo is installed namely 04.23_R
Phone has ROM 1.86.401.0 + Windows Mobile 6.5 installed and email set up, upgrade fails to resolve problem
I hope that this makes sense, if please mail
There are several threads in this forum that provide some answers.
I have a new S80 - experienced the identical problem to yours - and I did the following registry changes:
BlueTooth Fix:
1.Navigate to HKLM\Security\Policies\Policies\
Click "Values" soft-key
Change "00001001" value to 1 (decimal) (recovery note: default is 2)
Change "00001005" value to 40 (decimal) (recovery note: default is 16)
Reboot device.
2. Modify the HandsFree plug-in:
HKLM\Software\WIDCOMM\Plugin\HandsFree
i. Change SupportedFeatures to 45 (default is 1135)
ii. Add value HFBDA binary, set to same value as LastConnectedBda
iii. Add value HFDeviceType decimal 2
3. Modify the WIDCOMM bluetooth general settings:
HKLM\Software\WIDCOMM\BtConfig\General
i. Change bdaddr to (no value)
ii. Change DisableReopenAudio to 0 (default is 1)
4. Reboot device
To find other threads on this forum (and PPC Geeks) search for "Pairing bluetooth with car".
@prubin
you, sir are a genius! I went from having one of the worst wm bluetooth experiences to one of the best! thanks!
Phonebook
Look at this thread if you want the phonebook to work.
http://forum.xda-developers.com/showthread.php?t=591322&page=3
/MrFredd
Touch Pro 2 vs Pioneer Avic x9115bt
I couldn't answer incoming calls. This worked perfectly. Thank you
I have had quite similar problems with my HTC TP2 an a Volvo V50.
Then I found out that there was an update of the BT-software of the car. The Volvo-Service installed the free update of the software in the car. Now it works fine without any problems.
Whenever I disable xt9 (with duty's .cab) my keyboard mapping goes back to stock TP2. Even if I reinstall the tilt2 hardware keyboard fix cab, as long as xt9 is disabled, my keyboard is jacked. As soon as I re-enable xt9 it works again.
I've searched the forum and can't seem to find any solutions.
Any suggestions?
(AT&T Tilt2, Energy Feb 22 (21892) rom)
Thanks
Good evening,
I got a Fire TC and successfully paired it with a MS Wedge Bluetooth Keyboard, but the Keyboard itself has a physical German Keyboard layout and apparently, even though having switched back and forth from and to English/German in the Fire TV's native Language settings, the input language always remained the wrong one.. well wrong for the Keyboard.
As I used the Settings.Apk for pairing in the first place I thought I could also use it to switch the system's input language, but it always crashes when selecing Input / Languages there.
Is there any other way to switch the underlying Android's Input language (from presumably en-US to de-DE)?
Cheers and thanks!
-Jörg
Same here without BT.
http://forum.xda-developers.com/showthread.php?t=2940151