I have recently upgraded to TomTom 5, and generally things are good except that because my PDA2k has a built in keyboard, TomTom wont show me the onscreen version.
I have contacted TT but they say there are no immediate plans to change this 'feature'. I'm sure you can imagine, with the PDA in a car cradle, I don't really want to be sliding the keyboard out to use. As well as this TT seems to set its own keyboard configuration over the PDA so I can't use the function key to access numbers.
Does anyone know who I can trick TT5 into thinking there is no built in keyboard so I can use the onscreen one?
Thanks for any help.
http://forum.xda-developers.com/viewtopic.php?t=22510
Stefan
Hi all, after I install the intellidialer in my IIs, my Qwerty keyboard can only input one digital number on the pop-up intellidialer's phone pad when I use the Qwerty keyboard to dial, but it work fine if I disable the intellidialer. Any help for this issue when I enable intellidailer? Thanks.
Does Anyone know this issue?
Hello,
I`m using TomTom 6 as navigation software on my T-Mobile MDA 3.
But I have the problem, that the TomTom Keyboard isn't show in fullscreen to input the destination adress. I must type on a button to show the fullscreen software keyboard of tomtom.
I have the same problem on my WM2003 and WM2005 devices.
Do anyone know the regkey to disable the hardware keyboard or antother way to fix this?
Regards
Selcuk
here are some screenshots.
Hello,
i have the same problem with tomtom version 6.00. I remember the same problem was with the first version(s) of tomtom 5. TomTom fixed that later with a patch, sad that they have an old problem in the new version.
Hi guys
before I upgraded my ROM (Artemis Touch 4.02 WM6.1 WWE ROM) on my XDA orbit the WiFi used to switch off automatically when in standby mode. Can I get this ROM to do the same please?
Is there a registry hack or a cab file to install to do this for me.
Also when I check out the memory icon in settings the tab which shows running programs is missing, can I get that back?
Again is the a registry hack or cab file for this?
In all other respects this is a fantastic ROM and thanks to Meschle for his hard work putting this together
Simon
ok, I figured this out myself!
basically, if I use the com manager to switch WiFi on/off & put my Orbit into standby it wil switch off the Wifi automatically.
however; if I use a button mapping program like Hbutton or AEbutton to toggle the WiFi it WON'T switch off automatically. weird but true.
So my question is can I get a registry fix to sort this out or am I going to have to use the com manager from now on?
not happy to use button mapping simply because on at least two occasions I have run my battery flat because I forgot to switch oif the WiFi
(Still) not sorted out the running program tab in the memory module though)
thanks
Simon
I'm using HTC Trinity WM6 and wish to use my old Stowaway universal Bluetooth keyboard working? i cannot find driver for WM6. anyone have it?
please help!! i love my BT keyboard and wish to get it work again.
thanks
Attached is the driver I use for my Kaiser WM6/6.1, dunno if it'll work on your Trinity or not.
If not here is the drivers page: http://corporate.igo.com/support/Drivers.asp. Just choose your manufacturer and model.
Note that WM6 comes with basic keyboard drivers -- you only need to install a driver if you want to use special functionality such as customized keys. I use the built-in drivers on my Kaiser with a BT keyboard (not the Stowaway, but supposedly compatible).
htc tytn II and sierra bt keyboard
everybody,
trying to connect / use my new sierra bt keyboard with my htc tytn II and nothing works,.... if i go through the htc the keyboard is detected, asks for a security code, does not recognise the one i put in, (although the instructions say pick one of your choice), and does not connect.
if i go through the keyboard CAB installed on the htc, still cannot connect,.... i am not exactly a 'newbie' but if someone could give a step by step direction on how to get this to work, i would be very grateful,....
thanks,
ek
sorry everyone, i used elyspar's CAB file on my htc tytn II,.... thanks for your help,....ek
found a vid on youtube very helpful,.... it's actually quite simple to connect, so maybe i need to retract, i am a newbie,....
here's the link, http://www.youtube.com/watch?v=P8HAge9yJu4
no functionality though, just basic input, good for emails / word, but limited,....
guess i have to install the driver on my kaiser somehow,....
Hi everybody, can you tell me which driver i have to install for my Niki? It's not on the list...
Thank you very much.
ekacz24 said:
everybody,
trying to connect / use my new sierra bt keyboard with my htc tytn II and nothing works,.... if i go through the htc the keyboard is detected, asks for a security code, does not recognise the one i put in, (although the instructions say pick one of your choice), and does not connect.
if i go through the keyboard CAB installed on the htc, still cannot connect,.... i am not exactly a 'newbie' but if someone could give a step by step direction on how to get this to work, i would be very grateful,....
thanks,
ek
Click to expand...
Click to collapse
I could use an Apple Alu BT KB with HTC TyTN (not II). Paired. Without any special driver. Remember to press Enter on the KB after the code. Now I have a new Touch HD and I get it paired but nothing happens clicking on the keyboard...
I will start installing drivers which I find here suggested and will report.
iGo stowaway BT keyboard and WM6
Hello all,
I originally posted this message in a Blackstone forum, but as this problem probably relates to WM6 in general I thought I would post here
I have an igo bluetooth keyboard and I am using Blackstone phone (running the usual WM6.1 proffessional. I installed the igo software and everything worked fine except that phone crashed a lot. Not so useful. I then uninstalled the software and paired the keyboard using the onboard Bluetooth keyboard drivers. All worked well for one run through and I was able to type away. However I have not got the thing to work again since, even after re-pairing the devices. Does anyone haev any thoughts about what I might be doing wrong?
Thanks.
Tom
Hello Guys, partly not to the topic hear....
I have an igo stowaway keyboard and a travel mouse and i have been using them with my fusi n560 (wm 6.0). Now I bought a Nokia 5800 mobile phone with symbian s60v3 touch. The keyboard came with multiple driver including both wm and symbian versions, but the mause came only with wm driver. Now the question is: do you happen to know how could I use my mouse with my symbian device? Sorry for asking symbian related question here....
Special Characters and the Sierra Stowaway
I have previously used the Sierra Bluetooth Keyboard and it worked flawlessly on my T-Mobile Wing running WM5... I recently tried to port the same driver suggested by ek... (PPC5) to the T-Mobile HTC Touch Pro2, WM6.1.
It works on all keys, including the function keys, but cannot produce the specialty characters on the 5th, number-row, i.e., [email protected]#$%^&*()
Everything else seems to work fine... anybody come across a fix for this?
Thanks!
JSS
I've been interested in acquiring an Apple Wireless Keyboard for my PDA too.
But from skimming other people's post, looking at what was successful on the internet (e.g. the guy on youtube with the Mio who paired with the Apple BT Keyboard), it seems that all the success stories come from people running WM5/6
Anything 6.1 and above seems to not work in general, although you have some success stories like from http://forum.xda-developers.com/showthread.php?t=486595
Has anyone successfully paired with 6.1-6.5?
jstapley said:
I have previously used the Sierra Bluetooth Keyboard and it worked flawlessly on my T-Mobile Wing running WM5... I recently tried to port the same driver suggested by ek... (PPC5) to the T-Mobile HTC Touch Pro2, WM6.1.
It works on all keys, including the function keys, but cannot produce the specialty characters on the 5th, number-row, i.e., [email protected]#$%^&*()
Everything else seems to work fine... anybody come across a fix for this?
Thanks!
JSS
Click to expand...
Click to collapse
I have similar problems with my Samsung Omnia, WM6.1 and the German Stowaway Keyboard (QWERTZ) with the driver 4.51.
Just the keys !$& are not working.
Could there be a workaround like using ASCI numbers?
I tried ALT+33 to get a "!" but had no success.
Does anybody else has some suggestions?
Thanks,
Sigi
sigi-s said:
I have similar problems with my Samsung Omnia, WM6.1 and the German Stowaway Keyboard (QWERTZ) with the driver 4.51.
Just the keys !$& are not working.
Could there be a workaround like using ASCI numbers?
I tried ALT+33 to get a "!" but had no success.
Does anybody else has some suggestions?
Thanks,
Sigi
Click to expand...
Click to collapse
I solved my problem:
I installed the English driver 4.52
(I have an English ROM and use a German Keyboard)
The driver was changed from version Ger4.51 to Eng4.52 on several places and I think they solved some Bugs.
I resetted my Omnia after the installation.
Because the problem still existed, I resetted the Omnia once again, while the Stowaway keyboard was selected in the keyboard menu.
After that reset all the characters worked like the should.
Hope that helps.